[Peter: depend on WCHAR as python needs it, fix white space]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: drop redundant HOST_.._DEPENDENCIES setting]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: drop autoreconf, add URL]
Signed-off-by: Will Newton <will.newton@imgtec.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
add infrastructure for closed binary blobs
[Peter: whitespace/Kconfig fixes, use tar to copy to TARGET_DIR]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
SQLCipher is a fork of SQLite that adds AES encryption using OpenSSL.
It relies on tcl to generate some of its source code, so host-tcl is
required.
[Peter: select openssl]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Open2300 is a package of software tools that reads (and writes) data
from a Lacrosse WS2300/WS2305/WS2310/WS2315 Weather Station.
This package will install all the binaries on the target.
Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Has been marked as broken since July 2010 (39e6ba1b), and nobody has
stepped up to support it, so now finally remove it completely.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
all external python packages/libraries should reside in
"external python modules" section.
Move existing modules python-serial and python-mad there
Move python-mad from package/multimedia to package
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libmbus is an open source M-bus (Meter-Bus) library.
The Meter-Bus is a standard for reading out meter data from electricity
meters, heat meters, gas meters, etc.
[Peter: minor whitespace fixes]
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Reviewed-by: Luca Ceresoli<luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Even though it's most commonly used on desktops, this piece of software
also works well on embedded devices.
The package file only resolved mandatory dependencies. Things like
iptables and dnsmasq are only required if 'shared' connections are used,
and have hence not been made hard prerequisites.
There are probably too many i18n related files installed to the target.
That might need some more tweaking.
[Peter: fix Kconfig dependencies, add execinfo patch, fix libgcrypt-config
path, uClibc build fix]
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is a library for sending email through SMTP.
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A lot of open source Javascript libraries can be interesting to use on
embedded systems, so add a specific Javascript menu and the probably most
well known library of them all, jQuery.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: Needs X support and X support in imlib2]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-By: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The ConnMan project provides a daemon for managing internet connections
within embedded devices running the Linux operating system. The
Connection Manager is designed to be slim and to use as few resources as
possible, so it can be easily integrated. It is a fully modular system
that can be extended, through plug-ins, to support all kinds of wired or
wireless technologies. Also, configuration methods, like DHCP and domain
name resolving, are implemented using plug-ins. The plug-in approach
allows for easy adaption and modification for various use cases.
The location for released tarballs is still unavailable due to the
recent kernel.org outage, hence the package obtains the sources from git
for now.
[Peter: Ensure it can only be selected with workable toolchains,
use start-stop-daemon in initscript, and install cm if selected]
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Initial work by marcus.osdoba@googlemail.com
[Peter: add -daemon option, tweak Config.in]
Signed-off-by: Maxime Ripard <maxime@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
OpenCV is a free, open-source, cross-platform computer vision library
[Peter: fix deps, misc cleanup]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Send xl2tp to the bottom of the network applications menu to respect
sort order.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Busybox provides ifplugd, so build after it and make the menu option
conditional on BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
* Style cleanup
[Peter: really make it depend on BR2_PACKAGE_BUSYBOX_SHOW_OTHERS]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Busybox has a which applet so hide regular which unless
BR2_BUSYBOX_SHOW_OTHERS is true.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the C++ Portable Components libraries.
The Data/ODBC components is disabled because its dependency (unixODBC) is not
in Buildroot.
The Data/MySQL component is build tested only. It probably requires an
additional RPATH to actually run, because libmysqlclient resides in a
non-standard location under /usr/lib/mysql.
[Peter: use depends on for toolchain options]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: fix Config.in help text indentation]
Signed-off-by: Maxime Ripard <maxime@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bluetooth utils often used in embedded system, add it to package.
[Peter: fix dbus dependency]
Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We rename the package/fuse directory to package/libfuse to be
consistent with the package name. This is needed for a future commit
that will simplify the AUTOTARGETS macro by making assumptions on the
directory name.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Fixes by Thomas, including comments from Arnout:
* Use AUTOTARGETS instead of GENTARGETS
* Use $(KERNEL_ARCH) instead of $(BR2_ARCH) as argument to the
prepare-kernel.sh script. This allows the arch name to be fixed
with the usual sed expressions and the quotes to be stripped.
* Add the --verbose option to prepare-kernel.sh. This allows to get
some clear error message when no Xenomai patch has been found for
the current kernel version.
* Improve the help texts as suggested by Arnout, and remove the
now useless README file.
* Add a BR2_PACKAGE_XENOMAI_SMP option, instead of poking inside the
kernel configuration to find out whether SMP is enabled or
not. This cannot work because: 1) the kernel might be built
outside of Buildroot and 2) if the kernel is built inside
Buildroot, it is built *after* Xenomai, so the kernel
configuration file is typically not yet present.
* Simplify the ARM subarchitecture selection as suggested by Arnout.
* Remove the documentation and development files according to
Buildroot standards (using BR2_HAVE_DOCUMENTATION and
BR2_HAVE_DEVFILES).
* Simplify the /etc/ld.so.conf modification logic.
]
[Peter: whitespace fixes]
Signed-off-by: Benoit Mauduit <benoit.mauduit@openwide.fr>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Libgeotiff is an open source library normally hosted on top of
libtiff for reading, and writing GeoTIFF information tags.
Signed-off-by: Murat Demirten <mdemirten@yh.com.tr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Drop the dependency as it isn't really nice that other packages need
to select it, and kconf complains about it:
warning: (BR2_PACKAGE_E2FSPROGS && BR2_PACKAGE_USBMOUNT) selects
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS which has unmet direct dependencies
(!BR2_PACKAGE_BUSYBOX)
Instead ensure that only the libraries are built by default, so
busybox applets are still used unless explicitly configured.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Adds support for inotify-tools, which are useful for scripting the
Linux inotify API.
[Peter: needs largefile support]
Signed-off-by: Mike Williams <mike@mikebwilliams.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Hal is deprecated upstream, our package has not seen any significant
work since it was added in 2007, nothing depends on it and it's blocking
a long-overdue udev update.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the calibrator and other useful utilities for TI wireless solution,
based on wl12xx driver.
See http://linuxwireless.org/en/users/Drivers/wl12xx/calibrator for
further details.
[Peter: add libnl Config.in dependency]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Orc - the Oil Runtime Compiler - is the successor of liboil.
There's a runtime library that is installed in staging and target
and there's a host version that can be built if orcc, the ORC
compiler is needed at build time.
[Peter: minor tweaks]
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add ipset support package.
Note that this requires bleeding edge (>=2.6.39) kernel version or
patches.
[Peter: needs largefile, host-pkg-config]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Move fw_printenv / fw_setenv options from the uboot bootloader build to
the uboot-mkimage package, and rename it to uboot-tools.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
POSIX Access Control Lists, which are used to define more
fine-grained discretionary access rights for files and
directories.
[Peter: needs largefile]
Signed-off-by: Heiko Zuerker <smiley73@users.sourceforge.net>
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The argtable2 sourceforge project provides easy parsing of command line
options and file contents.
[Peter: Misc cleanup/fixes]
Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
NSS is the Network Security Services library developed as part of
the Mozilla project. It provides similar functions to OpenSSL but
allows MPL, GPL and LGPL licensing.
[Peter: fix target install]
Signed-off-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a package for the Netscape Portable Runtime library.
Signed-off-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Rsyslog is a powerful and flexible syslog daemon.
[Peter: whitespace, rename initscript, allow platform override of conf file]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Stunnel is an SSL tunnelling proxy.
[Peter: misc fixes, Config.in, allow skeleton override of stunnel.conf]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Libiqrf is library written in C which implement specific iqrf
protocol to communicate with iqrf usb devices (http://iqrf.org).
[Peter: select libusb, fix Config.in indentation]
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
fakeroot for the target fails to build against glibc, due to largefile
related problems :
libtool: link: /home/test/outputs/test-503/host/usr/bin/powerpc-linux-gnu-gcc -pipe -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o faked faked.o ./.libs/libcommunicate.a -ldl
{standard input}: Assembler messages:
{standard input}:2592: Error: symbol `__fxstatat64' is already defined
{standard input}:2627: Error: symbol `__fxstat64' is already defined
{standard input}:2663: Error: symbol `__xstat64' is already defined
{standard input}:2698: Error: symbol `__lxstat64' is already defined
make[3]: *** [libfakeroot.lo] Error 1
As fakeroot for the target is not really needed, and was only added
when we packaged fakeroot for the host, just make fakeroot not
selectable for the target.
We have to keep the AUTOTARGETS call for fakeroot on the target,
because the host variant does not work otherwise, due to issues in the
package infrastructure (that will be fixed post-2011.05).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
dhcpdump 1.7 required tcpdump, but version 1.8 now uses libpcap
instead. Also version 1.8 is no longer autotools based, but just a
simple Makefile.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Closes#3379
A good filesystem performance benchmark program
Signed-off-by: Martin Hicks <mort@bork.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This includes two separately configurable parition manipulation
utilities: gdsik and sgdisk are to GPT disks what fdisk and sfdisk are
in MBR land.
[Peter: patch source, fix typos, fix partial build, pass correct flags]
Signed-off-by: Malte Starostik <m-starostik@versanet.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add new package: bwm-ng
Bandwidth Monitor NG is a small and console-based live network and
disk-io bandwidth monitor for Linux, BSD, Solaris, Mac OS X and others.
[Peter: move to net, fix Config.in line length, remove unused make var]
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Changes made based upon e-mails with Mike Frysinger and Gerhard Heift. The
autoreconf change is important for anyone using uClibc as there is no widely
available backtrace (yet).
[Peter: fix Config.in indentation, autoreconf, patch]
Signed-off-by: Andy Kennedy <Andy.Kennedy@AdTran.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It has been marked as broken for close to 1 year (7452b4edfa), without
any effort to fix it, so remove it from the tree.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: don't link statically, only depend on iconv if !BR_ENABLE_LOCALE]
Signed-off-by: Nate Ford <nford@westpond.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Quite a lot of packages select bzip2 (for its libbz2 library), so don't
hide it even though busybox DOES have a bzip2 applet - Otherwise
kconfig complains.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
python-serial is a Python library to access serial ports.
This package has originally been introduced to test that third-party
pure Python modules (that do not use C extensions) build properly
against the Buildroot Python infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libffi is needed by the Python interpreter.
The libffi library provides a portable, high level programming
interface to various calling conventions. This allows a programmer to
call any function specified by a call interface description at
run-time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for the libsigc++ library.
[Peter: Rename dir, use libtool patch, add C++ dep]
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: Small tweaks, add patch descriptions]
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Convert binutils to a proper autotargets package
* Add version 2.21 and drop version 2.17
* Hook up packaged binutils for target gcc
* Build tools are on HOST_DIR now so change it
* Move cross/host gcc to HOST_DIR
* Drop kludge from commit 3c77bab2ee
This is fixed in the next commit "gcc: install copies of libgcc,
libstdc++ and libgcj to the sysroot" - tested for arm & x86_64
targets.
* TARGET_CROSS now pointed to HOST_DIR too
[Peter: Config.in tweaks]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Convert sstrip to a proper gentargets package
* Use openwrt svn version, it's basically the same one we used
* Change the hooks from old toolchain/sstrip to new package/sstrip
* Drop the old toolchain/sstrip directory
* sstrip for the target is now in Package -> Development
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It hasn't seen any updates since it was added early 2008, upstream seems
dead and it doesn't build with modern GCC versions.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
l2tp is no longer being developed, and xl2tpd is forked from l2tpd and is
maintained by Xelerance Corporation.
[Peter: remove invalid pppd dependency]
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The package has been marked deprecated, is no longer developed
upstream, so let's get rid of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This package has been marked deprecated in Buildroot last year, no-one
complained, and it isn't developed upstream anymore. So get rid of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This package has been marked deprecated in October, and no-one
complained. Moreover, it doesn't sound like a package that is widely
used on embedded systems. So we get rid of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This package has been marked deprecated some time ago, because it has
been integrated into Busybox. Let's get rid of it now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
FBGrab is a framebuffer screenshot program, capturing the linux
frambuffer and converting it to a png-picture.
[Peter: drop zlib dep, add uninstall]
Signed-off-by: Daniel Nyström <daniel.nystrom@timeterminal.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* ccache is now a normal package (both for the host and the target).
* ccache option is now part of the "Build options" menu. It will
automatically build ccache for the host before building anything,
and will use it to cache builds for both host compilations and
target compilations.
* bump ccache to 3.1.3
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: use BR2_KERNEL_MIRROR]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a new TCP/UDP network testing tool, that provides some advanced
features compared to ttcp.
[Peter: cleanup, fix FLAGS, move to network]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
udev is hidden by default (because of BR2_PACKAGE_BUSYBOX_SHOW_OTHERS),
but other packages (hal + usbmount) tries to select it, which gives
warnings if it isn't visible.
To fix this, simply make it always visible. To call mdev an equivalent
of udev is also stretching the truth anyway.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Microwin is disabled in Buildroot since January 2007
(726abd4e51) and nobody
complained. Moreover, the upstream project hasn't done any release
since five years, so let's remove this package, as announced in the
notes of 2010.08 release.
The project maintainer has announced in June 2010 that he is working
again on the project, and he has switched to Git. When a new release
is done, we can re-introduce it if people need it (this old package
needed serious work to be converted to the new package infrastructure
anyway).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Gtk 1.x is now very old, and Gtk 2.x has been around for a long
time now. Besides Dillo that just got removed, we no longer have any
package that depend on Gtk 1.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version of Dillo, based on Gtk 1.x is no longer maintained.
If someone needs the newer version of Dillo, we'll have to package
FLTK2 first.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As stated on http://pcmcia-cs.sourceforge.net/: "The Linux pcmcia-cs
package is officially deprecated. It can only be used with 2.4 and
older kernels.".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's deprecated upstream (merged in prboom), not updated in years and
broken (uses host includes / missing dependencies), so remove it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It doesn't build as there's no dependency on openssl, and it hasn't seen
any real updates since it got added in 2006, so simply remove it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This package include a patch for directfb support. This patch has been
proposed for upstream integration
(https://bugzilla.gnome.org/show_bug.cgi?id=614199).
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
We haven't had any updates to the java packages in a long time,
gcj in 4.3.x doesn't build, and 4.4.x is missing ecj1, so it cannot
have many users.
Mark it as broken and remove during the 2010.11 cycle, unless someone
steps up to maintain it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Rename it from wireless-tools to wireless_tools to match upstream.
Make it install manpages.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It's for ancient 2.4 kernels, and busybox has a modutils applet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add support for the old squashfs 3.x tools, so that squashfs 3.x root
filesystems can be generated.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Supported both for the target and the host. Will be used by the root
filesystem generation code, thanks to genisoimage.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Needed as a dependency of cdrkit, which contains genisomage, useful
for generating ISO9660 filesystem images.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upgrade libusb to v1.0.3 and add new libusb-compat package for
compatibility with old packages that expect the pre-1.0 API.
Also update usb_modeswitch to depend on libusb-compat rather than
libusb.
Minor fixes by Thomas Petazzoni <thomas.petazzoni@free-electrons.com>.
Fixes bug #1093.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
This is an old package. It is currently broken, and probably nobody
uses it. So let's get rid of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This XML internationalization set of tools is required to build
several of our packages, and may not be available on the host machine.
Only the host variant has been tested.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This Perl module is needed to build intltool, which in turn is needed
to build several of our packages. We assume that Perl is installed on
the host.
Only the host variant of this package has been tested and is used. The
code for the target variant (what to do at the configure, build and
install steps) isn't implemented, but the GENTARGETS call for the
target is mandatory, due to limitations of the Makefile.package.in
infrastructure (if one wants the host package to be implemented, then
the target package *must* exist). This limitation will be removed
after 2010.02.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Closes#515.
Tcpreplay is a tool for replaying network traffic from files saved with
tcpdump or other tools which write pcap(3) files.
The tcpreplay suite also ships with other tools (tcprewrite,
tcpreplay-edit) for manipulating pcap files.
[Peter: minor tweaks]
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Don't hide all editors in config if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not
selected. Indeed vi is the only editor already provided by busybox.
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Invert the BR2_PACKAGE_BUSYBOX_HIDE_OTHERS option to use positive logic,
renaming it to _SHOW_OTHERS.
Positive logic is simpler to understand, and it makes all{,package}config
do the right thing.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It doesn't compile:
../../src/memory.c: In function '__mp_memquery':
../../src/memory.c:769: error: lvalue required as left operand of assignment
And hasn't seen any updates since it got added in 2006, so it cannot
have many users. People most likely use valgrind nowadays for memory
debugging anyway - Drop it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The source target was broken until very recently, and it doesn't build
as it tries to use the host compiler for the client stuff, so there
cannot be many users of it.
People should use avahi instead nowadays, so so just remove it instead
of hacking it to work.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
