The KDB UART driver uses the Fiasco(.OC) kernel debugger console as backend
for input and output. This is useful in the case that only one UART is
available.
Fixes#665.
Remove the 'epit' variable from the generic imx31 and imx53 specification,
and only add it to base-hw specific i.MX specs. Thereby the EPIT timer
library gets build for base-hw only.
Moreover, fix some const-ness issues in the platform_timer implementation
for the EPIT timer.
Fixes#688.
This patch simplifies the way of how Genode's base libraries are
organized. Originally, the base API was implemented in the form of many
small libraries such as 'thread', 'env', 'server', etc. Most of them
used to consist of only a small number of files. Because those libraries
are incorporated in any build, the checking of their inter-dependencies
made the build process more verbose than desired. Also, the number of
libraries and their roles (core only, non-core only, shared by both core
and non-core) were not easy to capture.
Hereby, the base libraries have been reduced to the following few
libraries:
- startup.mk contains the startup code for normal Genode processes.
On some platform, core is able to use the library as well.
- base-common.mk contains the parts of the base library that are
identical by core and non-core processes.
- base.mk contains the complete base API implementation for non-core
processes
Consequently, the 'LIBS' declaration in 'target.mk' files becomes
simpler as well. In the most simple case, only the 'base' library must
be mentioned.
Fixes#18
By using the build system's library-selection mechanism instead of many
timer targets with different 'REQUIRES' declarations, this patch reduces
the noise of the build system. For all platforms, the target at
'os/src/drivers/timer' is built. The target, in turn, depends on a
'timer' library, which is platform-specific. The various library
description files are located under 'os/lib/mk/<platform>'. The common
bits are contained in 'os/lib/mk/timer.inc'.
The 'Timer::Session::msleep' function is one of the last occurrences of
long-blocking RPC calls. Synchronous blocking RPC interfaces turned out
to be constant source of trouble and code complexity. I.e., a timer
client that also wants to respond to non-timer events was forced to be a
multi-threaded process. This patch replaces the blocking 'msleep' call
by a mechanism for programming timeouts and receiving wakeup signals in
an asynchronous fashion. Thereby signals originating from the timer can
be handled along with signals from other signal sources by a single
thread.
The changed interface has been tested on Linux, L4/Fiasco, OKL4, NOVA,
L4ka::Pistachio, Codezero, Fiasco.OC, and hw_pbxa9. Furthermore, this
patch adds the timer test to autopilot.
Fixes#1
The default constructor didn't initialize all members, some of them holding
pointers. In the de-constructor the _name pointer was tried to free up, even
when it was not initialized.
Avoid any hassle for uninitialized members and just initialize it. Fixes
sporadic page fault on x86_64 base-nova.
Issue #155
Add functionality to lookup an object and lock it. Additional the case is
handled that a object may be already in-destruction and the lookup will deny
returning the object.
The object_pool generalize the lookup and lock functionality of the rpc_server
and serve as base for following up patches to fix dangling pointer issues.
The block count in DMA requests is limited to 8 bit. Therefore,
if a client requests more than 255 blocks in a single packet request,
split the request in a loop.
Implement 'Signal_receiver::pending()'.
Provide display-subsystem MMIO.
Avoid method ambiguousness in 'Irq_context' in
'dde_linux/src/drivers/usb/signal/irq.cc'
(it derives from two list element classes when using 'base_hw').
Enables demo scenario with 'hw_panda_a2'.
Fix bug regarding idle thread in thread scheduling in
'base-hw/src/core/kernel.cc'.
Fix regarding signal submit in signal framework in
'base-hw/src/core/kernel.cc'.
The new 'Uart::Session' interface is an extension of the
'Terminal::Session' interface that allows for configuring UART-specific
parameters, i.e., the baud rate.
By naming all board declaration (previously in base/include/drivers/board) the
same way, and putting them in platform-specific include-pathes, we save additional
declaration redirection in the base-hw kernel, and in driver definitions.
With this patch, the driver code gets complemented with DMA support.
The support for master DMA, in turn, cleared the way for using
interrupts to wait for the completion of transfers, which largely
relieves the CPU compared to the polling PIO mode. Consequently, the new
version has a much lower CPU footprint.
In the current version, both modes of operation PIO and DMA are
functional. However, PIO mode is retained for benchmarking purposes only
and will possibly be removed to keep the driver simple. It is disabled
in the driver's 'main.cc'.
This patch replaces the jiffies thread in 'sd_card/omap4/bench' calls to
'Timer::Session::elapsed_ms()'. This way, we use wall-clock time for the
measurements. Depending on the load of the rest of the system, the
previous version used to accumulate the inaccuracy for each 'msleep'
call.
The new SD card driver at 'os/src/drivers/sd_card/omap4' allows the use
of an SD card with the Pandaboard as block service. Currently, the
driver is using PIO, no DMA, and no IRQs. The driver can be tested using
the 'os/run/sd_card.run' script.
This patch extends the RAM session interface with the ability to
allocate DMA buffers. The client specifies the type of RAM dataspace to
allocate via the new 'cached' argument of the 'Ram_session::alloc()'
function. By default, 'cached' is true, which correponds to the common
case and the original behavior. When setting 'cached' to 'false', core
takes the precautions needed to register the memory as uncached in the
page table of each process that has the dataspace attached.
Currently, the support for allocating DMA buffers is implemented for
Fiasco.OC only. On x86 platforms, it is generally not needed. But on
platforms with more relaxed cache coherence (such as ARM), user-level
device drivers should always use uncacheable memory for DMA transactions.
This patch implements a simple Qt-based media player which is actually a
graphical user interface for the SDL-based 'avplay' media player from
'libav'. It starts 'avplay' as a child and shows its graphical output in a
'QNitpickerViewWidget'. The widgets for controlling the player state send
the according keyboard and mouse input events to 'avplay'.
The 'qt_avplay' player supports the following configuration options:
<mediafile name="..."/>
-> name of the media file to play
<framebuffer_filter name="..." ram_quota="..."/> (may appear multiple times)
-> name of a framebuffer filter service to filter the video output
Fixes#222.
This patch increases the stack size of entrypoint threads in the PCI and
PS/2 drivers, in the Terminal server and in the Signal service for 64-bit
Genode/Fiasco.OC built with -O0.
Fixes#198.
This patch makes use of the recently added support for const RPC
functions by turning 'Framebuffer::Session::mode()' and
'Input::Session::is_pending()' into const functions.
The 'mode_sigh' function allows the client to receive notifications
about server-side display-mode changes. To respond to such a signal, the
client can use the new 'release' function, which acknowledges the mode
change at the server and frees the original framebuffer dataspace. Via a
subsequent call of 'dataspace', a framebuffer dataspace corresponding to
the new mode can be obtained. Related to issue #11.
As a preliminary step for working on issue #11, this patch revisits the
'Framebuffer::info' RPC call. Instead of using C-style out paramters,
the new 'mode()' RPC call returns the mode information as an object of
type 'Mode'. Consequently, mode-specific functions such as
'bytes_per_pixel' have been moved to the new 'Framebuffer::Mode' class.
The probing and I/O resource allocation is done only once at the
creation time of the first session. When closing and re-opening the
session, the '_device' object is simply reused. This patch fixes#92.
This patch prevents 'fb_sdl' from wrongly using SDL headers located in
the libports repository. We have to make sure to use the headers
installed on the host system.
Sebastian Sumpf
Norman Feske
Christian Prochaska
Stefan Kalkowski
Ivan Loskutov
Martin Stein
Alexander Boettcher
Markus Partheymueller
Ivan Loskutov
Christian Helmuth
Genode Labs