* Acknowledge receive of page-fault signal with ack_signal,
but restart thread execution separately
* use kill_signal_context when disolving a pager_object to prevent race
* Remove bureaucracy in form of Thread_event and Signal_ack_handler
* remove dead code in riscv, namely Thread_base definition
* translation_table_insertions function for ARM drops out,
which was overcautious
Put the initialization of the cpu cores, setup of page-tables, enabling of
MMU and caches into a separate component that is only used to bootstrap
the kernel resp. core.
Ref #2092
This cleans up the syscalls that are mainly used to control the
scheduling readiness of a thread. The different use cases and
requirements were somehow mixed together in the previous interface. The
new syscall set is:
1) pause_thread and resume_thread
They don't affect the state of the thread (IPC, signalling, etc.) but
merely decide wether the thread is allowed for scheduling or not, the
so-called pause state. The pause state is orthogonal to the thread state
and masks it when it comes to scheduling. In contrast to the stopped
state, which is described in "stop_thread and restart_thread", the
thread state and the UTCB content of a thread may change while in the
paused state. However, the register state of a thread doesn't change
while paused. The "pause" and "resume" syscalls are both core-restricted
and may target any thread. They are used as back end for the CPU session
calls "pause" and "resume". The "pause/resume" feature is made for
applications like the GDB monitor that transparently want to stop and
continue the execution of a thread no matter what state the thread is
in.
2) stop_thread and restart_thread
The stop syscall can only be used on a thread in the non-blocking
("active") thread state. The thread then switches to the "stopped"
thread state in wich it explicitely waits for a restart. The restart
syscall can only be used on a thread in the "stopped" or the "active"
thread state. The thread then switches back to the "active" thread state
and the syscall returns whether the thread was stopped. Both syscalls
are not core-restricted. "Stop" always targets the calling thread while
"restart" may target any thread in the same PD as the caller. Thread
state and UTCB content of a thread don't change while in the stopped
state. The "stop/restart" feature is used when an active thread wants to
wait for an event that is not known to the kernel. Actually the syscalls
are used when waiting for locks and on thread exit.
3) cancel_thread_blocking
Does cleanly cancel a cancelable blocking thread state (IPC, signalling,
stopped). The thread whose blocking was cancelled goes back to the
"active" thread state. It may receive a syscall return value that
reflects the cancellation. This syscall doesn't affect the pause state
of the thread which means that it may still not get scheduled. The
syscall is core-restricted and may target any thread.
4) yield_thread
Does its best that a thread is scheduled as few as possible in the
current scheduling super-period without touching the thread or pause
state. In the next superperiod, however, the thread is scheduled
"normal" again. The syscall is not core-restricted and always targets
the caller.
Fixes#2104
This is a redesign of the root and parent interfaces to eliminate
blocking RPC calls.
- New session representation at the parent (base/session_state.h)
- base-internal root proxy mechanism as migration path
- Redesign of base/service.h
- Removes ancient 'Connection::KEEP_OPEN' feature
- Interface change of 'Child', 'Child_policy', 'Slave', 'Slave_policy'
- New 'Slave::Connection'
- Changed child-construction procedure to be compatible with the
non-blocking parent interface and to be easier to use
- The child's initial LOG session, its binary ROM session, and the
linker ROM session have become part of the child's envirenment.
- Session upgrading must now be performed via 'env.upgrade' instead
of performing a sole RPC call the parent. To make RAM upgrades
easier, the 'Connection' provides a new 'upgrade_ram' method.
Issue #2120
base generic code:
* Remove unused verbosity code from mmio framework
* Remove escape sequence end heuristic from LOG
* replace Core_console with Core_log (no format specifiers)
* move test/printf to test/log
* remove `printf()` tests from the log test
* check for exact match of the log test output
base-fiasco:
* remove unused Fiasco::print_l4_threadid function
base-nova:
* remove unused hexdump utility from core
base-hw:
* remove unused Kernel::Thread::_print_* debug utilities
* always print resource summary of core during startup
* remove Kernel::Ipc_node::pd_label (not used anymore)
base*:
* Turn `printf`,`PWRN`, etc. calls into their log equivalents
Ref #1987Fix#2119
Besides adapting the components to the use of base/log.h, the patch
cleans up a few base headers, i.e., it removes unused includes from
root/component.h, specifically base/heap.h and
ram_session/ram_session.h. Hence, components that relied on the implicit
inclusion of those headers have to manually include those headers now.
While adjusting the log messages, I repeatedly stumbled over the problem
that printing char * arguments is ambiguous. It is unclear whether to
print the argument as pointer or null-terminated string. To overcome
this problem, the patch introduces a new type 'Cstring' that allows the
caller to express that the argument should be handled as null-terminated
string. As a nice side effect, with this type in place, the optional len
argument of the 'String' class could be removed. Instead of supplying a
pair of (char const *, size_t), the constructor accepts a 'Cstring'.
This, in turn, clears the way let the 'String' constructor use the new
output mechanism to assemble a string from multiple arguments (and
thereby getting rid of snprintf within Genode in the near future).
To enforce the explicit resolution of the char * ambiguity, the 'char *'
overload of the 'print' function is marked as deleted.
Issue #1987
This patch establishes the sole use of generic headers across all
kernels. The common 'native_capability.h' is based on the version of
base-sel4. All traditional L4 kernels and Linux use the same
implementation of the capability-lifetime management. On base-hw, NOVA,
Fiasco.OC, and seL4, custom implementations (based on their original
mechanisms) are used, with the potential to unify them further in the
future.
This change achieves binary compatibility of dynamically linked programs
across all kernels.
Furthermore, the patch introduces a Native_capability::print method,
which allows the easy output of the kernel-specific capability
representation using the base/log.h API.
Issue #1993
Write tick count of next kernel timer to the guest timed events page if
present. This causes the guest VM to be preempted at the requested tick
count and ensures that the guest VM can not monopolize the CPU if no
traps occur.
The base-hw kernel expects a configured switch-event from the guest VM
to base-hw with ID 30 and target vector 32 to be present in the system
policy.
Issue #2016
* The Vm thread is always paused and on exception to make sure that guest VM
execution is suspended whenever we handle an interrupt. Also signal the Vm
session to poke waiting threads (e.g. Virtualbox EMT).
* Implement Vm::proceed
Switch to the mode transition assembly code declared at the _vt_vm_entry
label.
Issue #2016
The entry enables interrupts and initiates a handover to the guest VM by
invoking event number one. The sti instruction is placed at the start to
allow exits to Muen before handing off to the VM if window exiting is
requested.
Issue #2016
The sinfo function declared in sinfo_instance.h creates a static sinfo
object instance and returns a pointer to the caller.
- kernel timer and platform support to use sinfo() function to
instantiate sinfo object
- address and size of the base-hw RAM region via the sinfo API
- log_status() function in sinfo API
* Adds public timeout syscalls to kernel API
* Kernel::timeout installs a timeout and binds a signal context to it that
shall trigger once the timeout expired
* With Kernel::timeout_max_us, one can get the maximum installable timeout
* Kernel::timeout_age_us returns the time that has passed since the
calling threads last timeout installation
* Removes all device specific back-ends for the base-hw timer driver and
implements a generic back-end taht uses the kernel timeout API
* Adds assertions about the kernel timer frequency that originate from the
requirements of the the kernel timeout API and adjusts all timers
accordingly by using the their internal dividers
* Introduces the Kernel::Clock class. As member of each Kernel::Cpu object
it combines the management of the timer of the CPU with a timeout scheduler.
Not only the timeout API uses the timeout scheduler but also the CPUs job
scheduler for installing scheduling timeouts.
* Introduces the Kernel::time_t type for timer tic values and values inherited
from timer tics (like microseconds).
Fixes#1972
This is a generalisation approach of the hw_zynq target. As the boards
typically use UART1 instead of UART0 (used by qemu), we have to
distinguish between those. Moreover, in general hw_zynq does not imply
zynq_qemu anymore, so that the support of particular boards can be
placed in third-party or community repositories (e.g. Genode world).
Fixes#1926
This patch establishes a common organization of header files
internal to the base framework. The internal headers are located at
'<repository>/src/include/base/internal/'. This structure has been
choosen to make the nature of those headers immediately clear when
included:
#include <base/internal/lock_helper.h>
Issue #1832
Use the new Sinfo::get_dev_info function to retrieve device information
in the platform-specific get_msi_params function. If the requested
device supports MSI, set the IRQ and MSI address/data register values to
enable MSIs in remappable format (see VT-d specification, section
5.1.2.2).
Currently only one MSI per device is supported as the subhandle in the
data register is always set to 0.
The new Sinfo::get_dev_info function can be used to retrieve information
for a PCI device with given source-id (SID). The function returns false
if no device information for the specified device exists.
The platform-specific get_msi_params function returns MSI parameters for
a device identified by PCI config space address. The function returns
false if either the platform or the device does not support MSI mode of
operation.
This commit adds rocket core on the Zynq FPGA support to base HW. It also takes
advantage of the new timer infrastructure introduced with the privileged 1.8 and
adds improved TLB flush support.
fixes#1880
The new implementation of the FPU and FPU context is taken out to
separate architecture-dependent header files. The generic Cpu_lazy_state
is deleted. There is no hint about the existence of something like an
FPU in the generic non-architexture-dependent code anymore. Instead the
architecture-dependent CPU context of a thread is extended by an FPU
context where supported.
Moreover, the current FPU implementations are enhanced so that threads
that get deleted now release the FPU when still obtaining it.
Fix#1855
This commit enables multi-processing for all Cortex A9 SoCs we currently
support. Moreover, it thereby enables the L2 cache for i.MX6 that was not
enabled until now. However, the QEMU variants hw_pbxa9 and hw_zynq still
only use 1 core, because the busy cpu synchronization used when initializing
multiple Cortex A9 cores leads to horrible boot times on QEMU.
During this work the CPU initialization in general was reworked. From now
on lots of hardware specifics were put into the 'spec' specific files, some
generic hook functions and abstractions thereby were eliminated. This
results to more lean implementations for instance on non-SMP platforms,
or in the x86 case where cache maintainance is a non-issue.
Due to the fact that memory/cache coherency and SMP are closely coupled
on ARM Cortex A9 this commit combines so different aspects.
Fix#1312Fix#1807
On ARM Cortex A9 platforms the external PL310 L2 cache controller
needs to be initialized dependent on the SoC. For instance on Pandaboard
it needs to call the firmware running in TrustZone's secure world,
on i.MX6 it initializes it directly, on other boards it doesn't need
to be initialized at all, because the bootloader already did so.
Therefore, we should implement the PL310 intialization in board specific
code and not in the base class implementation.
Ref #1312
This commit separates certain SMP aspects into 'spec/smp' subdirectories.
Thereby it simplifies non-SMP implementations again, where no locking
and several platform specific maintainance operations are not needed.
Moreover, it moves several platform specifics to appropriated places,
removes dead code from x86, and starts to turn global static pointers
into references that are handed over.
Likewise on the x86 branch, we have to remove all virtual memory ranges from the
virtual memory allocator that are used by one-by-one mappings of I/O regions
used by the kernel.
Fix#1797
On the USB Armory, we want to secure different devices than on other i.MX53
implementations. Thus, add a board specific configuration that is interpreted
by the kernel Trustzone initialization.
Ref #1497
Enhance the VM state, that can be accessed by a VMM, by a member
'unsigned irq_injection'. In Kernel::Vm::proceed check, whether
irq_injection is set. If so, check whether irq_injection is a
non-secure IRQ. If so, let the PIC raise this IRQ in the VM and reset
irq_injection.
Ref #1497
Instead of returning pointers to locked objects via a lookup function,
the new object pool implementation restricts object access to
functors resp. lambda expressions that are applied to the objects
within the pool itself.
Fix#884Fix#1658
Other platforms implement Kernel::Cpu_context stuff in
kernel/cpu_context.cc. On x86_64, it was implemented in
kernel/thread.cc. The commit fixes this inconsistency to the other
platforms.
Ref #1652
The distinction between Kernel::Thread and Kernel::Thread_base is
unnecessary as currently all Hw platforms would have the same content in
the latter class. Thus I've merged Kernel::Thread_base into
Kernel::Thread. Thereby, Kernel::Thread_event can be moved to
kernel/thread.h.
Ref #1652
The Muen-specific PIC implementation provides the irq_occurred()
function which is used to register an IRQ with the PIC upon thread
exception.
The occurred IRQs are stored in a boolean array internally and handed
out to a CPU via take_request().
The Muen Sinfo API is used to retrieve information about the execution
environment of a subject running on the Muen Separation Kernel.
While the C++ API is defined in sinfo.h, musinfo.h specifies the
internal format of the information stored in the Sinfo pages provided by
the Muen SK. It is a copy of the file contained in the libmusinfo
library of the Muen project. That is the reason why the coding style in
this file differs from the official style.
