Commit Graph

36 Commits

Author SHA1 Message Date
Norman Feske
cada11b553 Add sel4_x86_32 to create_builddir tool 2015-05-26 09:40:01 +02:00
Christian Helmuth
1ff8a55d7c create_builddir: use acpi spec on hw_x86_64 2015-05-26 09:39:51 +02:00
Christian Helmuth
95c651b4aa Enable drivers for hw_x86_64 in create_builddir 2015-04-13 14:18:16 +02:00
Martin Stein
60e392f0c0 hw: support Wandboard Quad (i.MX6)
The port uses the Cortex-A9 private timer for the kernel and an EPIT as
user timer. It was successfully tested on the Wandboard Quad and the CuBox-i
with the signal test. It lacks L2-cache and Trustzone support by now.

Thanks to Praveen Srinivas (IIT Madras, India) and  Nikolay Golikov (Ksys Labs
LLC, Russia). This work is partially based on their contributions.

Fix #1467
2015-04-09 16:04:43 +02:00
Norman Feske
cc00af85bf Add hw_x86_64 to create_builddir tool 2015-03-27 11:53:16 +01:00
Norman Feske
f9269f5cb1 Adapt base-codezero to new ports mechanism
Fixes #1425
2015-03-02 12:19:12 +01:00
Martin Stein
be392b3bf9 hw: support USB-Armory board
The USB Armory is almost the same as the i.MX53-QSB but it uses only
one of the two RAM banks available in i.MX53. Furthermore we use the USB
Armory only with Trustzone enabled.

Ref #1422
2015-02-27 11:48:35 +01:00
Martin Stein
00167aec14 hw: activate perf-counter by default
This is needed at least by rump_ext2.run as it uses the perf-counter
in the jitterentropy-lib. On other platforms the perf-counter gets enabled
by the kernel by default. However, on HW, we keep the specifier to allow users
to disable it easily (e.g. for security reasons).

Ref #1393
2015-02-16 14:01:45 +01:00
Stefan Kalkowski
901bff813d imx31: remove platform completely (fix #1360) 2015-01-12 14:24:15 +01:00
Martin Stein
9a4a0448be hw vea9x4: remove trustzone support
When building Genode for VEA9X4 as micro-hypervisor protected by the ARM
TrustZone hardware we ran into limitations regarding our basic daily
testing routines. The most significant is that, when speaking about RAM
partitioning, the only available options are to configure the whole SRAM
to be secure and the whole DDR-RAM to be non-secure or vice versa. The
SRAM however provides only 32 MB which isn't enough for both a
representative non-secure guest OS or a secure Genode that is still
capable of passing our basic tests. This initiated our decision to
remove the VEA9X4 TrustZone-support.

Fixes #1351
2015-01-08 13:28:42 +01:00
Martin Stein
6cb9559feb hw: core as library
The build config for core is now provided through libraries to enable
implicit config composition through specifiers and thereby avoid
consideration of inappropriate targets.

fix #1199
2014-07-24 10:18:06 +02:00
Stefan Kalkowski
3d68125b5e create_builddir: add hw_imx53 (TrustZone) target
Until now, the HW platform support for the TrustZone features of the
i.MX53 boards could only be used, when adding a "trustzone" SPEC variable
manually. This commit adds a create_builddir target for HW i.MX53 with
TrustZone features enabled, fo convenience reasons.
2014-07-09 16:26:04 +02:00
Norman Feske
3de1423a6a Build-system support for ported 3rd-party code
The new 'select_from_ports' function allows a target description file to
query the path to an installed port. All ports are stored in a central
location specified as CONTRIB_DIR. By default, CONTRIB_DIR is defined
as '<genode-dir>/contrib'. Ports of 3rd-party source code are managed
using the tools at '<genode-dir>/tool/ports/'.

Issue #1082
2014-05-27 11:14:42 +02:00
Norman Feske
ca971bbfd8 Move repositories to 'repos/' subdirectory
This patch changes the top-level directory layout as a preparatory
step for improving the tools for managing 3rd-party source codes.
The rationale is described in the issue referenced below.

Issue #1082
2014-05-14 16:08:00 +02:00
Stefan Kalkowski
7b49dbf2f3 hw: basic support for ODROID XU board (Fix #991) 2013-12-03 11:30:07 +01:00
Norman Feske
2322ab202c Remove OKLinux
Fixes #29
Fixes #30
Fixes #889
2013-10-22 08:00:16 +02:00
Christian Prochaska
4a9b1c6aab base-linux: add ARM support
This patch introduces a new platform 'linux_arm' for building and running
Genode/Linux on an ARM device.

Known limitations:

- libc 'setjmp()'/'longjmp()' doesn't currently save/restore floating
  point registers

Fixes #746.
2013-05-24 14:55:37 +02:00
Alexander Boettcher
da310bd726 tool: create appropriate build.conf for hw_arndale 2013-05-17 12:03:33 +02:00
Norman Feske
8ac6d8c96c base-hw: Support for Raspberry Pi 2013-05-15 20:48:07 +02:00
Alexander Boettcher
2beb851c5a run: add acpi spec as default to foc/nova 64bit 2013-05-10 11:16:11 +02:00
Norman Feske
e5c57bddcc Add ports-foc to build.conf for foc_arndale 2013-03-27 19:27:25 +01:00
Sebastian Sumpf
554876ceee foc_arndale: Added 'create_buildir' support 2013-02-25 16:45:47 +01:00
Martin Stein
1f95a9be03 hw_arndale: create builddir support
ref #601
2013-02-20 19:37:45 +01:00
Norman Feske
ebc73f66df Remove base-mb platform
This base platform is no longer maintained.

For supporting the Microblaze CPU in the future, we might consider
integrating support for this architecture into base-hw. Currently
though, there does not seem to be any demand for it.
2013-02-20 13:17:39 +01:00
Norman Feske
35f767ec38 Add acpi spec value for nova_x86_32 and foc_x86_32 2013-01-10 23:05:43 +01:00
Stefan Kalkowski
edb48873c1 base-hw & imx53: enable nested init
Fix #575
2013-01-08 11:36:52 +01:00
Martin Stein
f464b61829 base-hw & imx31: support by 'create_builddir'
Fix #537
2012-11-29 09:55:09 +01:00
Stefan Kalkowski
53529e0eeb Fiasco.OC: enable i.MX53 platform 2012-11-23 12:20:27 +01:00
Stefan Kalkowski
88316abca1 Merge panda_a2 and panda SPEC (fix #505, fix #506)
There is no obvious reason for having two different SPEC variables, definitions,
and pathes for the Pandaboard platform. It even lead to problems regarding the
omap4 framebuffer driver (look at issue #505 and #506).
2012-11-23 12:20:27 +01:00
Martin Stein
4c710e853b Extend create_builddir for the base-hw platforms. 2012-08-03 12:06:36 +02:00
Stefan Kalkowski
3e9d5c532c Enable drivers for foc_x86_64 while builddir creation
In the create_builddir script the foc_x86_64 platform was missing
when adding x86-drivers to the etc/build.conf file. This lead to
failed run-scripts initiated by the autopilot tool.
2012-06-27 10:53:35 +02:00
Norman Feske
1030ac1c67 Add dde_linux to build.conf template for panda 2012-06-22 11:38:36 +02:00
Alexander Boettcher
ae6257dce1 Use NOVA microkernel from github, add 64bit
Use git to get recent kernels from github. Adjust NOVA patch to compile
with recent github version. Patch and use makefile of NOVA microkernel
to avoid duplicated (and outdated) makefile in Genode

Furthermore, this patch adds support for using NOVA on x86_64. The
generic part of the syscall bindings has been moved to
'base-nova/include/nova/syscall-generic.h'. The 32/64-bit specific
parts are located at 'base-nova/include/32bit/nova/syscalls.h' and
'base-nova/include/64bit/nova/syscalls.h' respectively.

On x86_64, the run environment boots qemu using the Pulsar boot loader
because GRUB legacy does not support booting 64bit ELF executables.

In addition to the NOVA-specific changes in base-nova, this patch
rectifies compile-time warnings or build errors in the 'ports' and
'libports' repositories that are related to NOVA x86_64 (i.e., Vancouver
builds for 32bit only and needed an adaptation to NOVAs changed
bindings)

Fixes #233, fixes #234
2012-06-20 19:44:07 +02:00
Stefan Kalkowski
94e14ec20b Fiasco.OC: basic support for pandaboard 2012-05-29 13:55:00 +02:00
Genode Labs
d1891e8a27 Merge final fixes from internal repositories 2011-12-23 14:04:29 +01:00
Genode Labs
da4e1feaa5 Imported Genode release 11.11 2011-12-22 16:19:25 +01:00