Fixes CVE-2014-4911 and a few other issues that don't have a CVE assigned
(backports from 1.3.x branch).
The no programs & shared/static patches are now upstream albeit in a
slightly different form.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
inadyn isn't static-build friendly, even if we pull in the libz link
line for the failure stated below it'll fail when trying to link to
libdl and using dlopen for the plugins. Fixes:
http://autobuild.buildroot.net/results/1a1/1a1a184e8248e5c51fa730d0c9721fe67a9c84a4/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The AVR32 architecture from Atmel is obsolete since a long time, not
supported upstream in most of the toolchain components (requires a
special version of gcc, an old version of uClibc, etc.). Until
February, Simon Dawson was making an excellent job at maintaining
AVR32 in Buildroot, and fixing all the issues caused by this
architecture. However, Simon focus has changed, and despite his call
for a new maintainer for AVR32 in Buildroot, nobody stepped up.
The issue of maintaining AVR32 is becoming worse and worse, so this
patch proposes to deprecate it for 2014.08, but keeping the support
around, to remove it for sure in 2014.11.
Cc: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit removes the version selection for the busybox
package. Busybox is very well maintained, and bugs are typically fixed
in a timely fashion. Moreover, regressions are fairly unlikely in this
very stable and well-tested tool.
Therefore, there isn't a very compelling reason to have a version
selection for Busybox since we don't accept such a version selection
for the vast majority of other packages, unless there is a strong
reason to do so.
Consequently, this commit:
* Removes the 1.19.4, 1.20.2 and 1.21.1 Busybox versions, patches and
default configuration file.
* Moves the 1.22.1 patches from package/busybox/1.22.1 to just
package/busybox/ like all other packages.
* Renames the default 1.22.1 configuration file to just
busybox.config.
* Adapts the busybox.mk makefile to encode the current version to
use.
* Adds appropriate options to Config.in.legacy. However, even though
the BR2_BUSYBOX_VERSION_1_22_X is removed, we don't add a
Config.in.legacy option for it, since it would cause a legacy
warning for virtually *all* users as most people are currently
using 1.22.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We already default to 7.6 for all architectures (except AVR32, ARC and
Microblaze that have their specific versions), and we have added 7.7
recently.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Those gcc series are old and are not used as the default versions for
any of the architectures we support, so this commit gets rid of them.
The gcc 4.3.x series technically remains used by the LPC32xx
defconfigs we have:
configs/ea3250_defconfig:BR2_GCC_VERSION_4_3_X=y
configs/fdi3250_defconfig:BR2_GCC_VERSION_4_3_X=y
configs/phy3250_defconfig:BR2_GCC_VERSION_4_3_X=y
Back when those defconfigs were introduced, gcc 4.3 was chosen because
it was the only one capable of building a fully working kernel for
those ARM-based platforms. However, the original submitter, Alexandre
Belloni, no longer has access to the hardware platforms, so he is
unable to test if newer gcc versions have fixed the problem. It
certainly doesn't make sense to keep gcc 4.3.x just for those three
boards, so we'll wait for someone actually using those defconfigs to
complain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_UCLIBC_ARM_TYPE was only used for uClibc 0.9.32 on ARM. Now
that only uClibc 0.9.33 is supported for ARM, there is no point in
keeping BR2_UCLIBC_ARM_TYPE, since the corresponding uClibc options no
longer exist.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit removes all remaining references to uClibc 0.9.32.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit removes the 0.9.32.1 version of uClibc, which is very old,
and does not bring any specific advantage over 0.9.33, which has been
around for more than two years now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- The 2.20.x series is old, it no longer makes sense to support it.
- In the 2.21.x series, we still have 2.21.1, so keeping 2.21 doesn't
make much sense, so this patch removes it.
- Similarly for the 2.23.x series, having both 2.23.1 and 2.23.2
doesn't make much sense, so this patch removes 2.23.1 and keeps
2.23.2.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tested toolchain compiles with binutils 2.22 and 2.24.
Result tested in Qemu 2.0.0. (only little endian version
tested)
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that there's a twolame package we can add support for it in mpd.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 2014R1 toolchain is provided in two flavours by Analog Devices:
one based on gcc 4.3.x, which is considered stable, and one based on
gcc 4.5.x, considered experimental. In commit
5a65b8e185 ("toolchain-external: add ADI
Blackfin 2014R1 toolchain, remove 2012R1") both variants were added.
However, after some testing in the autobuilders, and discussion with
the Analog Devices folks, it turns out that the experimental version
of the toolchain is too experimental. It causes numerous build
failures, and the Analog Devices folks clearly say that it's an early
release and that they expect quite a few problems to show up.
Therefore, this commit removes the experimental flavor and keeps only
the stable variant. Note that the removal/renaming of the Config.in
options is not a problem, since those options were added after the
2014.05 release.
Fixes:
http://autobuild.buildroot.org/results/2a9/2a9d9c332a206fdb46bc8ba022c74d23082a6312/http://autobuild.buildroot.org/results/e1c/e1ce0c1cdd0139208dddaa8f2441ab0e3ab2385e/http://autobuild.buildroot.org/results/993/993aca3f4719afaa4b37524f9136fb8cdc53a066/
and more.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ccrypt is a utility for encrypting and decrypting files and streams.
Signed-off-by: David Bachelart <david.bachelart@bbright.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Quite some work has been done from 0.8.3 to 1.0.1, and as a result
this commit is very intrusive. The biggest change is the move to an
autotools package.
Then, the options that enable utilities individually have been deprecated
and moved to Config.in.legacy. Instead, we introduce new option to select
either all the utilities. This change loses granularity in favor of
maintainability.
[Peter: needs host-pkgconf. Select and use argp-standalone on uClibc]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is no longer needed now that e244eb12d (xserver_xorg-server: Fix race
condition when installing man pages) has been reverted.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With the recent change to the init script the default /etc/default/ntpd file
doesn't do anything, so don't install it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add ntp.conf file to make ntpd syncing.
Starting ntpd daemon with -g to sync time also with big offsets.
Removes the use of deprecated ntpdate command for initial time sync.
[Peter: drop unused NTPDATE_BIN variable]
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order for this comment to be properly displayed, it must be moved to be
at the end of the file.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported by Sagaert Johan in the mailing list mpd 0.18.x fails to
build with gcc 4.9.x
Patch status: sent upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit mainly fixes bug #7268 by improving the isolation of
the build environment by making sure some host environment header
paths do not leak into the target build. The investigation was done by
David <buildroot-2014@inbox.com>. This is done by not calling the
add_multiarch_paths() function of setup.py when we're cross-compiling,
a change made in the newly introduced
python3-012-dont-add-multiarch-path.patch.
In addition to this, another patch is added to make sure the build is
aborted when one of the Python module fails to build. This is done in
python3-013-abort-on-failed-modules.patch. Without this, the Python
setup.py script simply logs which module failed to build, but doesn't
abort, so it's hard to notice when there is a problem.
[Peter: slightly reword commit message]
Cc: David <buildroot-2014@inbox.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit mainly fixes bug #7268 by improving the isolation of
the build environment by making sure some host environment header
paths do not leak into the target build. The investigation was done by
David <buildroot-2014@inbox.com>. This is done by not calling the
add_multiarch_paths() function of setup.py when we're cross-compiling,
a change made in the newly introduced
python-013-dont-add-multiarch-path.patch.
In addition to this, another patch is added to make sure the build is
aborted when one of the Python module fails to build. This is done in
python-014-abort-on-failed-modules.patch. Without this, the Python
setup.py script simply logs which module failed to build, but doesn't
abort, so it's hard to notice when there is a problem.
[Peter: slightly reword commit message]
Cc: David <buildroot-2014@inbox.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: also add README to _LICENSE_FILES]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
