Add initial support for the Lego Mindstorms EV3 programmable brick.
The Lego Mindstorms EV3 brick comprises a Texas Instruments AM1808 SoC, with
an ARM 926EJ-S main processor running at 300 MHz.
https://en.wikipedia.org/wiki/Lego_Mindstorms_EV3
This configuration uses the Linux kernel of the ev3dev project.
https://github.com/mindboards/ev3sources
More info is available in the board/lego/ev3/readme.txt file, shamelessly
documented in the same way as the SoCkit folks did.
[Peter: lock kernel headers to match]
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
All of the new toolchain requirements (ipv6, threads, rpc) aren't
actually new - this package failed to build for ages, it just wasn't
picked up by the autobuilders because the main Makefile just doesn't
care about bailing out properly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: check for avahi-daemon, not just the base avahi package]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump knock to version 0.7 and switch away from a git snapshot, it's
nicer and avoids the need to autoreconf.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream removed support for libxml2 as xml backend, select expat
unconditionally.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Unfortunately the gitorious page/wiki says nothing useful so use the
elinux.org page for now.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove ADI toolchain 2012R1 package kludges since that version is gone
since the last bump.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2014-1684: The ASF_ReadObject_file_properties function in
modules/demux/asf/libasf.c in the ASF Demuxer in VideoLAN VLC Media
Player before 2.1.3 allows remote attackers to cause a denial of service
(divide-by-zero error and crash) via a zero minimum and maximum data
packet size in an ASF file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also make the menu entry less melodramatic.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently we configure uClibc to use kernel headers from "staging" folder with
KERNEL_HEADERS="$(STAGING_DIR)/usr/include". This path is added to include
search path of uClibc build system in Rules.mak "CFLAGS += -I$(KERNEL_HEADERS)".
At the same time on uClibc installation to "staging" we point to the same
location "$(STAGING_DIR)/usr" (headers effectively go in "usr/include").
So after every installation to "staging" dependences get touched (even though we
copy the same headers every time) and so we may see lots of sources in uClibc
get rebuilt.
This has 2 consequences:
1. Longer build time - becase even on ordinary buildroot build uClibc is built
twice. On "uclibc building" and on "uclibc installation to target".
2. Symbols in libuClibc built initially (that is later installed in
"staging/sysroot") are situated with different offset compared to second build
(later copied in "target"). This happens because as described above only part
of sources get rebuilt and then on final linkage object files are linked in
different order.
And (2) leads to problems on remote rebugging: gdbserver reports offsets that
correspond to pointless assembly in libuClibc on host.
Here's how it looks like.
Before this patch:
$ cd ~/br2_output/i586/target/lib
$ i586-buildroot-linux-uclibc-readelf -s libuClibc-0.9.33.2.so | grep kill
423: 0000c42c 54 FUNC GLOBAL DEFAULT 7 kill
$ cd ~/br2_output/i586/staging/lib
$ i586-buildroot-linux-uclibc-readelf -s libuClibc-0.9.33.2.so | grep kill
423: 0000b518 54 FUNC GLOBAL DEFAULT 7 kill
After this patch:
$ cd ~/br2_output/i586/target/lib
$ i586-buildroot-linux-uclibc-readelf -s libuClibc-0.9.33.2.so | grep kill
423: 0000b518 54 FUNC GLOBAL DEFAULT 7 kill
$ cd ~/br2_output/i586/staging/lib
$ i586-buildroot-linux-uclibc-readelf -s libuClibc-0.9.33.2.so | grep kill
423: 0000b518 54 FUNC GLOBAL DEFAULT 7 kill
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Noam Camus <noamc@ezchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The fltk buildsystem no longer tries to strip binaries during installation,
so these can be dropped.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For example, if your project is known to require more space than the
default max cache size, then you might want to increase the cache size
to a suitable amount using the -M (--max-size) option.
The string you specify here is passed verbatim to ccache. Refer to
ccache documentation for more details.
These initial settings are applied after ccache has been compiled.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 433290761f changed the hard-coded
ccache directory location to use BR_CACHE_DIR (then BUILDROOT_CACHE_DIR),
which is exported by Makefile based on the BR2_CCACHE_DIR config option.
This allowed the cache location to be changed on-the-fly by setting a
"make" command line variable, but left the default location of ccache's
normal default at "$HOME/.ccache". Since this location does not match the
default for BR2_CCACHE_DIR, it is basically almost never correct, so
direct invocation of ccache outside of the buildroot Makefile, such as for
increasing the cache size, becomes cumbersome.
This patch changes the last-ditch cache location from "$HOME/.ccache" to
the BR_CCACHE_DIR value defined when host-ccache is configured. Note that
the ability to later override the cache location by using a BR_CACHE_DIR
command line variable is left intact.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the specific check that was done in dependencies.sh to use the
generic one that were introduced by the previous patch.
Also, introduce, BR2_NEEDS_HOST_JAVAC and BR2_NEEDS_HOST_JAR as it is
needed by classpath.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Avoid copy/pasting the same block of code to check if a program is
available on the host machine.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sources of the mkpasswd package are shipped with Buildroot, rather than
downloaded from an external location. As a result, no explicit version is
defined, causing build messages and build directory to show 'undefined' as
version.
This patch sets the version for mkpasswd to 'buildroot-$(BR2_VERSION), which
would for example expand to 'buildroot-2014.05'.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sources of the makedevs package are shipped with Buildroot, rather than
downloaded from an external location. As a result, no explicit version is
defined, causing build messages and build directory to show 'undefined' as
version.
This patch sets the version for makedevs to 'buildroot-$(BR2_VERSION), which
would for example expand to 'buildroot-2014.05'.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch migrates the toolchain and toolchain-buildroot packages to the
virtual package infrastructure, causing the log messages to change from:
>>> toolchain undefined Downloading
>>> toolchain undefined Extracting
...
to
>>> toolchain virtual Downloading
>>> toolchain virtual Extracting
...
and similar for 'toolchain-buildroot', simply because it looks nicer.
At the same time, the directory names also become toolchain-virtual,
toolchain-buildroot-virtual instead of the corresponding 'undefined'
variants.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As mentioned in the e-mail accompanying the introduction of the pkg-virtual
infrastructure [1], the definition of FOO_VERSION is 'strange'.
After the cleanup of single/double dollar signs in inner-generic-package,
the special construction in pkg-virtual is no longer needed and can be
simplified.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[1] http://lists.busybox.net/pipermail/buildroot/2014-April/093670.html
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
