Commit Graph

30 Commits

Author SHA1 Message Date
Stefan Kalkowski
c3d4802ac8 hw: re-implement lazy FPU context switch
The new implementation of the FPU and FPU context is taken out to
separate architecture-dependent header files. The generic Cpu_lazy_state
is deleted. There is no hint about the existence of something like an
FPU in the generic non-architexture-dependent code anymore. Instead the
architecture-dependent CPU context of a thread is extended by an FPU
context where supported.

Moreover, the current FPU implementations are enhanced so that threads
that get deleted now release the FPU when still obtaining it.

Fix #1855
2016-01-26 16:20:38 +01:00
Stefan Kalkowski
7aff1895bf hw: enable SMP for ARM Cortex A9
This commit enables multi-processing for all Cortex A9 SoCs we currently
support. Moreover, it thereby enables the L2 cache for i.MX6 that was not
enabled until now. However, the QEMU variants hw_pbxa9 and hw_zynq still
only use 1 core, because the busy cpu synchronization used when initializing
multiple Cortex A9 cores leads to horrible boot times on QEMU.

During this work the CPU initialization in general was reworked. From now
on lots of hardware specifics were put into the 'spec' specific files, some
generic hook functions and abstractions thereby were eliminated. This
results to more lean implementations for instance on non-SMP platforms,
or in the x86 case where cache maintainance is a non-issue.

Due to the fact that memory/cache coherency and SMP are closely coupled
on ARM Cortex A9 this commit combines so different aspects.

Fix #1312
Fix #1807
2016-01-26 16:20:18 +01:00
Martin Stein
2b2007bc3f hw: add Pl310::Debug register definitions
Ref #1312
2016-01-15 16:42:12 +01:00
Stefan Kalkowski
166672fe16 hw: l2 cache initialization is platform specific
On ARM Cortex A9 platforms the external PL310 L2 cache controller
needs to be initialized dependent on the SoC. For instance on Pandaboard
it needs to call the firmware running in TrustZone's secure world,
on i.MX6 it initializes it directly, on other boards it doesn't need
to be initialized at all, because the bootloader already did so.
Therefore, we should implement the PL310 intialization in board specific
code and not in the base class implementation.

Ref #1312
2016-01-15 16:42:12 +01:00
Stefan Kalkowski
e05d26567d hw: make 'smp' property an aspect (Ref #1312)
This commit separates certain SMP aspects into 'spec/smp' subdirectories.
Thereby it simplifies non-SMP implementations again, where no locking
and several platform specific maintainance operations are not needed.
Moreover, it moves several platform specifics to appropriated places,
removes dead code from x86, and starts to turn global static pointers
into references that are handed over.
2016-01-15 16:42:12 +01:00
Johannes Schlatow
40b31876d2 base-hw: Add basic Zynq-7000 support (QEMU)
Ref #1599
2015-09-09 15:14:28 +02:00
Alexander Boettcher
c5877b5575 hw: remove access_thread_regs syscall
Issue #1652
2015-09-09 15:14:27 +02:00
Adrian-Ken Rueegsegger
c2ff0ae9d4 Minor cleanup fixes
- Fix spelling errors
- Remove extra semicolons
- Remove extra spaces

Fixes #1650
2015-08-21 11:00:59 +02:00
Stefan Kalkowski
8abd70e6e7 hw: allocate core's page-tables outside of binary
Moreover, be strict when calculating the page-table requirements of
core, which is architecture specific, and declare the virtual memory
requirements of core architecture-wise.

Ref #1588
2015-07-01 14:46:17 +02:00
Stefan Kalkowski
cc58b11998 hw: replace page table allocator with static one
Instead of organizing page tables within slab blocks and allocating such
blocks dynamically on demand, replace the page table allocator with a
simple, static alternative. The new page table allocator is dimensioned
at compile-time. When a PD runs out of page-tables, we simply flush its
current mappings, and re-use the freed tables. The only exception is
core/kernel that should not produce any page faults. Thereby it has to
be ensured that core has enough page tables to populate it's virtual
memory.

A positive side-effect of this static approach is that the accounting
of memory used for page-tables is now possible again. In the dynamic case
there was no protocol existent that solved the problem of donating memory
to core during a page fault.

Fix #1588
2015-06-22 14:43:41 +02:00
Stefan Kalkowski
e081554731 hw: kernel backed capabilities (Fix #1443) 2015-05-26 09:40:04 +02:00
Stefan Kalkowski
db5e4f70f1 hw: replace 'placement new' with 'construct_at<>'
Placement new can be misleading, as we already overload the new operator
to construct objects via pointers to allocators. To prohibit any problems here,
and to use one consistent approach, we can explicitely construct the object
with the already available 'construct_at' template function.

Ref #1443
2015-05-26 09:40:03 +02:00
Martin Stein
c9272937e7 CPU session: apply quota via relative weightings
Physical CPU quota was previously given to a thread on construction only
by directly specifying a percentage of the quota of the according CPU
session. Now, a new thread is given a weighting that can be any value.
The physical counter-value of such a weighting depends on the weightings
of the other threads at the CPU session. Thus, the physical quota of all
threads of a CPU session must be updated when a weighting is added or
removed. This is each time the session creates or destroys a thread.

This commit also adapts the "cpu_quota" test in base-hw accordingly.

Ref #1464
2015-05-06 10:55:16 +02:00
Stefan Kalkowski
c850462f43 hw: replace kernel's object id allocators
Instead of having an ID allocator per object class use one global allocator for
all. Thereby artificial limitations for the different object types are
superfluent. Moreover, replace the base-hw specific id allocator implementation
with the generic Bit_allocator, which is also memory saving.

Ref #1443
2015-04-17 16:13:20 +02:00
Stefan Kalkowski
657646e76e hw: adjust core bootstrap to fit generic process
* Introduce hw-specific crt0 for core that calls e.g.: init_main_thread
* re-map core's main thread UTCB to fit the right context area location
* switch core's main thread's stack to fit the right context area location

Fix #1440
2015-03-19 08:57:19 +01:00
Reto Buerki
32521cfd71 hw: Declare mtc_size constant in arm/cpu_support.h
This constant specifies the size of the mode transition control region.
2015-03-13 12:17:28 +01:00
Stefan Kalkowski
7582396e9c hw_arndale: enable ARM virtualization extensions
* enables world-switch using ARM virtualization extensions
* split TrustZone and virtualization extensions hardly from platforms,
  where it is not used
* extend 'Vm_session' interface to enable configuration of guest-physical memory
* introduce VM destruction syscall
* add virtual machine monitor for hw_arndale that emulates a simplified version
  of ARM's Versatile Express Cortex A15 board for a Linux guest OS

Fixes #1405
2015-02-27 11:48:05 +01:00
Stefan Kalkowski
07c8d1652e hw_arndale: setup ARM hypervisor mode
To enable support of hardware virtualization for ARM on the Arndale board,
the cpu needs to be prepared to enter the non-secure mode, as long as it does
not already run in it. Therefore, especially the interrupt controller and
some TrustZone specific system registers need to be prepared. Moreover,
the exception vector for the hypervisor needs to be set up properly, before
booting normally in the supervisor mode of the non-secure world.

Ref #1405
2015-02-27 11:48:05 +01:00
Stefan Kalkowski
322be1b4fb hw: LPAE for Cortex a15 (fix #1387) 2015-02-16 13:40:37 +01:00
Stefan Kalkowski
102444b82b hw: remove pointless, wasted memory in pd object
(ref #1387)
2015-02-16 13:40:37 +01:00
Martin Stein
5dea0b40aa hw: don't use ARM CPU-state stuff in generic code
Fixes #1404
2015-02-16 13:40:36 +01:00
Martin Stein
b8ba3a7a22 hw: rename Kernel::Processor Kernel::Cpu
Kernel::Processor was a confusing remnant from the old scheme where we had a
Processor_driver (now Genode::Cpu) and a Processor (now Kernel::Cpu).
This commit also updates the in-code documentation and the variable and
function naming accordingly.

fix #1274
2014-11-28 12:02:35 +01:00
Stefan Kalkowski
3befb64afe hw: correctly flush cache on ARM (fix #1257)
* When flushing the data and unified cache on ARM, clean and invalidate
  instead of just cleaning the corresponding cache lines
* After zero-ing a freshly constructed dataspace in core, invalidate
  corresponding cache lines from the instruction cache
2014-10-10 13:02:30 +02:00
Stefan Kalkowski
f0fae2a5f2 hw: set TTBR0 according to CPU facilities
Fixes #1195
2014-10-10 13:02:30 +02:00
Martin Stein
14e9a89cba hw: no superfluous ORing of zeros and clean up
fix #710
2014-08-15 10:19:49 +02:00
Martin Stein
9da42dde2f hw & arm_v7: mode transition via transit ttbr0
Previously, we did the protection-domain switches without a transitional
translation table that contains only global mappings. This was fine as long
as the CPU did no speculative memory accesses. However, to enabling branch
prediction triggers such accesses. Thus, if we don't want to invalidate
predictors on every context switch, we need to switch more carefully.

ref #474
2014-08-15 10:19:48 +02:00
Martin Stein
03cd76821c hw & arm: exceptions to asserts in transl. table
ref #474
2014-08-15 10:19:48 +02:00
Martin Stein
d48d0e7b43 hw: rename processor CPU
fix #1217
2014-08-15 10:19:48 +02:00
Martin Stein
1cba71208f hw: cpu_support to kernel/thread_base
ref #1217
2014-08-15 10:19:48 +02:00
Martin Stein
a5cf09fa6e hw: re-organize file structure
fix #1197
2014-08-15 10:19:48 +02:00