* isatty
For the moment it is not possible to determine if the fd belongs to a
tty. For whatever reasons, the check is done multiple times, e.g.
'tclsh', which will spam the LOG.
* sysctl(HW_FLOATINGPT)
FPU is enabled on all our platforms, so return true.
Fixes#3389.
Start and stop the DHCP state machine as the Nic link-state changes.
Invoke the link state handler during configuration rather than assume
that in the case of a downed link lwIP will defer DHCP until the link
comes up.
Additionally, support static DNS configuration via the "nameserver"
configuration attribute.
Fix#3388
It might happen, in CPU intensive tests (like TCP bulk lxip), or when
printing debugging output after a failed test (as done currently on
staging), that the run script on the host gives up and reboots the
platform too early. Thus, we raise the buffer time. A reboot should
be necessary only in rare cases anyway.
Fixes#3387
On muen, we don't have configured access to wifi so far. Thus, the wifi
driver doesn't come up and we should skip tests using this driver for
the platform.
Fix#3384
On x86 the CPU count is determined through ACPI's MADT by counting the
local APICs reported there. Some platforms report more APICs
than there are actual CPUs. These might be physically disabled CPUs.
Therefore, a check if the LAPIC is actually physically enabled in
hardware fixes this issue.
Thanks to Alex Boettcher
fixes#3376
Fix initial stack pointer alignment for x86_64 in crt0.s startup code of
bootstrap. SysV ABI states that upon function entry (rsp + 8) % 16 = 0.
There, we have to align the stack to 16 bytes before all 'call'
instruction not 8. Otherwise FPU (GP) exception might be raised later on
because of unaligned FPU accesses.
issue #3365
Since gcc 8.3.0 generates SSE instructions into kernel code, the
kernel itself may raise FPU exceptions and/or corrupt user level FPU
contexts thereby. Both things are not feasible, and therefore, lazy FPU
switching becomes a no go for base-hw because we cannot avoid FPU
instructions because of the entanglement of base-hw, base, and the tool
chain (libgcc_eh.a).
issue #3365
This removes implementations of and also references to anonymous new and
delete operators from the libc implementation. As allocators for
new/delete Libc::Allocator instances are used, which (paradoxically) map
to libc malloc/free.
Also disable TS (task switch) flag in cr0 during kernel initialization,
so FPU faults are not raised. This became necessary since GCC lately
aggressively generates FPU instructions at arbitrary places and also at
early kernel-bootstrapping stages.
fixes#3365
GCC version 7 and above generate calls to __divmoddi for 64bit integer
division on 32-bit. Unfortunately, libgcc liberaries of older compilers
lack this symbol and are still in use by Debian/Ubuntu LTS at least.
* added global offset table relative loading for global symbols
* removed 'initial_sp' and 'initial_x0' because they are currently not
used on this platform. If required they are easy to resurrect.
issue #3260
The libc features support for SOCK_CLOEXEC now which gets set via
the type argument in 'libnl'. Since we are only interested in the
actual type, i.e. if it is SOCK_RAW, just ignore the flags.
Issue #3289.
* Adjust expected pow(-1/1, inf/-inf/nan) output to current libm
behavior (as in FreeBSD, glibc, and OpenLibm) and return 1 on
x86_64/x86_32/arm
* Add 'double float' outputs for ARM which are defined to float
issue #3289
This prevents
error copying "bin/libm.lib.so": no such file or directory
error copying "bin/posix.lib.so": no such file or directory
when running "make run/noux" from an empty build directory.
On some platforms (foc+pbxa9, hw+imx53_qsb_tz, hw+rpi) the default buffer size
is to much for the RAM available on the board. Thus, decrease the buffer size
and therefore the number of polls for these platforms only.
Fixes#3354
Replace the FreeBSD libm with OpenLibm, which is easier to port.
OpenLibm is used by Mirage's freestanding Ocaml runtime (sin POSIX).
https://openlibm.org/
Ref #3289
Moreover, express current requirement to hw API, which was missing until now.
Originally, in the board-specific build directory of imx53_qsb the
"KERNEL" variable was preset with "hw". Therefore, it was not perceived
that this dependency is required.
Ref #3316
This reverts commit 918b9a9fa4.
The Muen debug console buffer was increased by the recent update, which
alleviates the issue with many log messages as in the ieee754 test.
Components like kernel, core, and bootstrap that are built for a
specific board need to reside inside the same architectural dependent
build directory. For instance there are sel4, foc, and hw kernel builds
for imx6q_sabrelite and imx7d_sabre, which have to reside inside the same
arm_v7 build directory.
This commit names those components explicitely, and adapts the run-tool to it.
Fix#3316
When enabling the 'keep_going' config attribute, the component will
carry on in case a child exited with an error. In addition, if the
'restart' attribute is set it will start executing the children from
the beginning.
Previously, only Invalid_dataspace, Region_conflict, and Out_of_ram were
handled for both allocate and attach with the same handlers. However,
both operations can also throw Out_of_caps and for all exceptions during
attach, the dataspace must be freed again whereas this is not the case
when the exception occured during allocate.
Issue #2953
either
- due to poor signal performance of base platform
- due to being to less prioritized
- due to schedule overload
- due to using time sources of different physical CPUs
Issue #3111
Instead of retieving the information about the underlying platform from
the configuration, check the running kernel from the platform_info. This
commit removes the undocumented "acpi" config attribute.
- kernel: propagate cr0 to VMM on exit in nested paging case
- kernel: disable forceful VM exit on task switch
- vm_session: adjust to kernel changes
Issue #3111
* Make package buildable for ARM too
* Move usb library to src targets for explicitly named targets
* adapt remaining run-scripts to use the correctly named usb drivers
Ref #2190
* Make target binaries independent of board SPECS
* Name binaries of one architecture unambigously
* Extend include path to match board specifics
* Adapt run-scripts to use the right binary
Ref #2190
Ref #3180
When there are too many PCI devices, the Expanding_reporter regenerates
the report. However, this doesn't reset the BDF counter used to iterate
over the devices. This results in starting the new report after the PCI
device that triggered the report buffer overflow. This commit fixes the
issue by putting the BDF counter initialization inside the lambda
function used to generate the report.
Fixes#3317
This patch fixes the corner case where an animated geometry changes its
destination mid-way while an animation is already in progress. The
'_trigger_animated_geometry' method used to back out early in this case,
which was intended as an optimization.
Fixes#3296
To enable the use of uncached DMA buffers as RX and TX communication
buffers in between driver (service) and client, introduce a cache
attribute in the constructor of Nic::Session_component
Ref #3291
With the new fact that plain time values are always 64 bit unsigned, the
timestamp type is never bigger than the plain time type. Therefore, a code path
in the curr_time interpolation that treated this condition is not neccessary
anymore.
Ref #3208
This enforces the use of unsigned 64-bit values for time in the duration type,
the timeout framework, the timer session, the userland timer-drivers, and the
alarm framework on all platforms. The commit also adapts the code that uses
these tools accross all basic repositories (base, base-*, os. gems, libports,
ports, dde_*) to use unsigned 64-bit values for time as well as far as this
does not imply profound modifications.
Fixes#3208
- Added 'io_buffer' attribute, default is 4M
- Added 'batch' attribute, specifying the number of jobs used
in parallel, default is 1 (sequential)
- Removed 'synchronous' attribute (use batch of 1 instead)
- Added 'copy' attribute (default "yes")
- Print number of signals ("triggered")
Issue #3283
This patch equips the 'Block::Connection' with a framework API for the
implementation of robust block-session clients that perform block I/O in
an asynchronous fashion.
An application-defined 'JOB' type, inherited from 'Connection::Job',
encapsulates the application's context information associated with a
block operation.
The lifecycle of the jobs is implemented by the 'Connection' and driven
by the application's invokation of 'Connection::update_jobs'. The
'update_jobs' mechanism takes three hook functions as arguments, which
implement the applications-defined policy for producing and consuming
data, and for the completion of jobs.
Issue #3283
As a preparatory step for introducing the new block-client API, we have
to turn the 'Block::Connection' into a class template. The template
argument will be used to tie an application-defined job type to the
block connection.
Issue #3283
Instead of using `cps` instruction, use an exception return
instruction to switch from `hyp` mode to `svc` mode.
Otherwise it causes unpredicted behaviour on ARM.
Fix#3284
This patch adds support for manually triggering the wakeup of the packet
sink by the source. This way, a packet source becomes able to marshal
batches of submissions or unmarshal batches of acknowledgements before
yielding the control over to the sink.
Issue #3283
Issue #3111
remove_range may deny to the job on memory pressure or insane ranges,
which ends up in an endless loop when the Avl allocator is in destruction.
Since the Avl gets destructed, solely the memory free up is of importance,
not the correct range adjustments during remove_range.
Track the dataspaces used by attach and add handling of flushing VM space
when dataspace gets destroyed (not triggered via the vm_session interface).
Issue #3111
Handles corner case when addr + size becomes exactly 0. Before the commit
the function returned that sum is not part of the range, which is wrong.
Issue #3111
This patch removes the blocking Block::Session::sync RPC function and
adds the asynchronous operations SYNC and TRIM to the block session's
packet-stream interface.
Even though the patch adjusts all block components to the interface
change, the components keep the former blocking handling of sync
internally for now because of the design of the 'Block::Driver'
interface. This old interface is not worth changing. We should instead
migrate the block servers step by step to the new
'Block::Request_stream' API.
Fixes#3274
The new request tag allows a block-session client to uniquely correlate
acknowledgements with outstanding requests. Until now, this was possible
for read and write operations by taking the value of the request's
packet-stream offset. However, SYNC and TRIM requests do not carry any
packet-stream payload and thereby lack meaningful offset values. By
introducing the notion of a 'tag', we can support multiple outstanding
requests of any type and don't need to overload the meaning of the
'offset' value.
Issue #3274
This patch splits the 'Request' definition into smaller types that are
suitable for the client-side API too.
The new 'Operation' type comprises the block operation's type (opcode)
and the operation's arguments (block number, block count).
The former 'Request::operation_defined' is now 'Operation::valid'.
The 'Request' aggregates an 'Operation', which changes its object
layout.
Note that this commit relaxes the bit-precise definition of 'Request' to
facilitate the use of 'unsigned long' where appropriate, in particular
for the request tag (which should correspond to an 'Id_space::Id'). The
originally bit-precise definition was pursued to allow the sharing of
the 'Request' type between SPARK and C++ code. However, it turns out
that defining a native type in each language and a (set of) converting
constructors is a more natural approach.
Issue #3283
When receiving a terminal signal, the uart device model has to
take all characters out of the stream. Otherwise, characters
might never arrive at the VM. This was not recognized before,
because it was used with a quite slow UART only, which obviously
never achieved to send more characters at once.
Ref #3278
A small terminal-client tool, which expects a specific line(-start),
and then sends a specified line to the other side. Optionally,
it prints all received lines to its LOG service.
Ref #3278
- sorting of initializer by Christian Prochaska - issue #3253
- leak of FPU register state reported by Julian Stecklina - thanks !
- fix page table synchronization bug - by Julian Stecklina
- add a second dynamic buddy if the memory requirements could not be fulfilled
by the first dynamic buddy
- disable vtlb peek if EPT/NPT is enabled
This patch renames 'wakeup_client' to 'wakeup_client_if_needed' to
clarify that the method triggers signals only when needed, not on every
call.
The name 'wakeup_client' is prone to misguide users to call the function
conditionally as an optimization, thereby complicating the code, but to
no effect.
Fixes#3279
This patch replaces the formerly fixed 2 KiB data alignment within the
packet-stream buffer by a server-defined alignment. This has two
benefits.
First, when using block servers that provide small block sizes like 512
bytes, we avoid fragmenting the packet-stream buffer, which occurs when
aligning 512-byte requests at 2 KiB boundaries. This reduces meta data
costs for the packet-stream allocator and also allows fitting more
requests into the buffer.
Second, block drivers with alignment constraints dictated by the
hardware can now pass those constraints to the client, thereby easing
the use of zero-copy DMA directly into the packet stream.
The alignment is determined by the Block::Session_client at construction
time and applied by the Block::Session_client::alloc_packet method.
Block-session clients should always use this method, not the 'alloc_packet'
method of the packet stream (tx source) directly. The latter merely
applies a default alignment of 2 KiB.
At the server side, the alignment is automatically checked by
block/component.h (old API) and block/request_stream.h (new API).
Issue #3274
This patch modernizes the 'Block::Session::info' interface. Instead of
using out parameters, the 'init' RPC function returns a compound 'Info'
object now. The rather complicated 'Operations' struct is replaced by
a 'writeable' attribute in the 'Info' object.
Fixes#3275
Triggering of an invalidated signal seems to be no real exception,
but something that occurs regularily. Therefore, the kernel warning
is of no use to developers anymore.
Ref #3277
As far as possible remove usage of warning/error/log in the kernel,
otherwise the kernel context might try to take a lock hold by a core
thread, which results in a syscall to block.
Fix#3277
This patch removes the reliance of the extract tool from the libc's
behavior regarding the access of time and timing.
The extract tool is not expected to need time. However, unfortunately,
libarchive calls the 'time' function unconditionally. By adding a
dummy for 'time', we avoid bothering the libc, which would otherwise
need to obtain a time source.
Issue #3204
In the original version, I used 'number_of_bits' because Ada's 'Size
returns the size in bits, not bytes. But the values (for objects) are
always a multiple of 8. On the C++ side, performing size checks at the
granularity of bits is just awkward. The term 'object size' is more
natural.
* necessary for enabling the kernel debugging facilities on base-foc
(outstring, fiasco_tbuf_log_3val and friends)
* disabled by default
related to issue #3260
By adding a wildcard at the beginning of (expected) error messages, the
test.run tool becomes able to match the lines (ignoring the characters
of the color escape sequence).
The 'aes_cbc_4k' library is simple wrapper around libsparkcrypto to
serve as a backend for storage encryption. It operates on data chunks of
4 KiB and uses AES-CBC while incorporating the block number and the
private key as salt values.
Discovered while creating an ext2 file system on an sd_card (no
partitions, imx6), which failed with an error message that stated the
device is in use. Genode's libc/posix layer has no notion of mount
points.
Fixes#3271
Disconnecting a client and connecting an other to the sd_card_drv
on imx6 results in a "Completion host signal timed out" error in
the newly connected client.
Fixes#3272
The "nameserver" file cannot be opened through a VFS File_system client
if the plugin does not support opening the parent directory of
"/nameserver", which would be "/".
Ref #3269
Replace the I/O response handler that is passed to the VFS at
construction with an object that is dynamically attached to handles.
This object shall also accept read-ready notifications, and plugins are
encouraged to keep handles awaiting ready-ready notifications separate
from handles that await I/O progress.
Replace the use of handle lists in plugins with handle queues, this
makes the code easier to understand and the ordering of notifications to
the application more explicit.
These changes replace the use of the Post_signal_hook from all VFS
plugins, applications must assume that read-ready and I/O notifications
occur during I/O signal dispatch and use an Io_progress_handler at its
entrypoints to defer response until after signal dispatching.
Fix#3257
Make sure that the rwlock is allocated before a lock operation is
performed. This case occurs if a static rwlock was create by using
PTHREAD_RWLOCK_INITIALIZER. Same goes for PTHREAD_CONDS_INITIALIZER.
Fixes#3262.
Since QEMU might put the audio device at 00:03.0, also check if the
vendor is Intel. Hopefully we do not render HDA on real machines
useless with this changes (so far I have not encountered one).
Fixes#3263.
For better or worse we have no proper way of handling this right now
but contrib libraries, e.g. glib, use it to determine if they can use
the underlying fd.
Fxies #3265.
Issue #3111
- enable vt-x in kernel configuration
Kernel patches:
- add unrestricted guest support
- avoid kernel boot failure when vt-x is not available
- avoid nullpointer in kernel when vcpu is not fully setup
- avoid vcpu scheduling bug which causes starvation on same/below prio level
- save efer register correctly from guest
The '_currently_constructed' pointer caches the information about which
'Launched_child' is currently configured in the menu. When discarding
the runtime (e.g., when un-using a file system) at this point, this
cached pointer was not invalidated while all 'Launched_child' objects
would be freed (including the currently constructed one). On the next
attempt to construct a new child, the sculpt manager attempted to
destruct the 'Launched_child' referred by the (now outdated)
'_currently_constructed' again.
Fixes#3240
Until now, Genode referenced a fork of the outdated elfloader-tool
to enable bootstrapping of sel4 on ARM platforms. Because the
elfloader is inherently dependent on the used platforms newer
ARM versions supported by the kernel could not be loaded by the
outdated elfloader. This commit uses a fresh fork of the nowadays
used sel4_tools repository.
Ref #3251
This commit handles the corner case where a package could be installed
successfully but the package's runtime definition is inconsistent with
the content delivered by the package's dependencies, i.e., the <content>
of the runtime file lists ROM modules that do not exist.
With this patch, the '+' menu shows the message "installed but
incomplete" whenever a package is in such a state.
Issue #3241
The new configuration attributes <tcp-forward to_port="123" /> and
<udp-forward to_port="123" /> enable manipulating the destination port of
port-forwarded packets.
Fixes#3237
The required memory of the VMM depends on the VM memory configuration (vbox)
and the available screen resolution. Check for insane configurations in the
beginning to avoid late surprises.
Issue #3216
The "Vfs::Vfs_handle" type should not contain any public members that
can be initialized by the VFS internally and by the application, so
remove inheritance from the "Genode::list::Element" class. The VFS
plugins must instead use lists of "Vfs::Vfs_handle" sub-classes, the
lifetime of which are always managed by the plugin.
Ref #3036
Use a single timeout scheduler passed during lxip instantiation for
both timers and 'schedule_timeout' facilites rather than instantiate
two timer sessions and signal handlers. This reduces the library's
capability cost and initialization time.
Fix#2961
The old inline assembly provided two output operands that were afterwards
combined for a return value. However, the second output operand isn't
necessary when using the "Acquiring a Lock" example-code of the ARM manual
"Barrier Litmus Tests and Cookbook". This saves two logical operations
per acquisition try. Additionally better documentation is now provided.
Fixes#1292
This patch adds the items necessary for building Genode components with
stack protection enabled, but it is not initialized at runtime. They are
provided at the moment as a convenience and do not implement a security
feature.
Fix#3066
