The AM_PATH_ALSA macro in utils/alsa.m4 unconditionally uses -ldl. This
breaks compilation of alsa-utils (and probably other packages using this
macro) for targets that do not support dynamic loading, such as for
Blackfin FLAT binaries.
This patch updates the macro to check if dlopen is available, and use that
result to conditionally add -ldl to the list of libraries.
Fixes
http://autobuild.buildroot.org/results/de2/de286880973be956f6c504aa9a758171d6f49674/build-end.log
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The FLAT GNU toolchain doesn't include the dlfcn.h header file.
Provide the necessary declarations (RTLD_*) to make alsa-lib happy.
Fixes
http://autobuild.buildroot.org/results/706/7069e1f43cbed745d65f7dd9904a3fff034530ac/build-end.log
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
[Thomas: change sequence number from 003 to 0003, update patch and commit
message ]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit a9baea4345 ('pixman: add patch
to fix Microblaze build failure'), a patch is added to the pixman
package to avoid using the FE_DIVBYZERO definition when it is not
available. However, it was using the have_fe_divbyzero variable to
define or not HAVE_FEDIVBYZERO, while the AC_CHECK_DECL autoconf macro
sets the ac_cv_have_decl_FE_DIVBYZERO variable.
The end result was that the FE_DIVBYZERO macro was considered as never
being available. This commit fixes that by using the appropriate
variable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages (actually, just oprofile) need to link against libiberty.
This option just installs libiberty.a so it has no effect on the target,
therefore it's not needed to add a config option for it.
Before binutils-2.24, there was a bug in libiberty/Makefile.in that
caused libiberty to be installed regardless of the
--enable-install-libiberty option. This problem wasn't noticed before
because binutils-2.24 is not selected on any of the autobuilders: the
version can only be selected if an internal toolchain is used, and it
defaults to 2.21.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Microblaze build of pixman was failing due to FE_DIVBYZERO not
being implemented. It turns out that the usage of it, like fenv.h and
feenableexcept() is optional. So the patch simply adds a configure
check and disables the appropriate code (which is only use in the
tests anyway).
This commit also renames the existing patch to follow the patch naming
convention, and get a reliable ordering when applying patches.
Fixes:
http://autobuild.buildroot.org/results/806/8064092cdbac85fbf4322429d29d5d11dc51860f/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libcgi always builds both the shared and static library, which doesn't
work on architecture that don't support shared library at all, such as
Blackfin with the FLAT format. libcgi uses autoconf, but not automake,
and the Makefile is not of the highest possible quality, so this
commit fixes the problem by introducing a "STATIC" variable that can
be set from the environment. When set to a non-empty value, the
Makefile assumes it should only build the static version of the
library.
Note that this package is in desperate need of some care: there is one
single patch that mixes several changes together, it doesn't have a
description or a Signed-off-by line, and there is now a github project
for libcgi at https://github.com/rafaelsteil/libcgi/ that has the same
fixes.
However, for the purpose of the master branch, we're doing the most
minimal fix possible, by just adding this STATIC variable.
Fixes:
http://autobuild.buildroot.net/results/625/625105bcaf26345f422b225787fc19611b65cd57/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable when using a uclibc version before 0.9.33 since dn_comp
function support was added in this version. Also disabling on AVR32
since any AVR32 toolchain will be based on a uclibc version older
than 0.9.33 (for using an external AVR32 toolchain).
[Peter: use dn_comp instead of __dn_comp]
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since quite a while, we have deprecated, and then removed the support
to build a compiler on the target. Therefore, having a distcc package
for the package is quite useless, and this patch consequently marks it
as deprecated so it can be removed in a future version of Buildroot.
Fixes:
http://autobuild.buildroot.net/results/16b/16be2138c8e5ba785fa2ad55b478dcd1b6fb5123/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using a relative path for O=... has limitations, since it is interpreted
relative to the Buildroot tree, and thus may lead to unexpected results.
For example, running this:
make -C buildroot O=my-O
will not create my-O in the current working directory, but as a
sub-directory of the Buildroot tree, here in buildroot/my-O
Explain this in the manual (as is similarly done for BR2_EXTERNAL).
Also add a note that $(O) will be created if missing.
Also change O=.. and -C .. to O=<...> and -C <...> to make it explicit
this is an ellipse, not a relative path.
Reported-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Although it is possible to use relative paths, there are a few pitfalls
when doing so.
To avoid confusion for a (newcoming) user, use absolute paths in the
manual (as is done in examples for $(O)), since it is guaranteed to be
working without corner cases.
[Peter: s/relatively/relative/ as suggested by Thomas]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using a relative path for BR2_EXTERNAL, and using an external defconfig,
such as in (from a Buildroot top-dir):
make O=.. BR2_EXTERNAL=.. foo_defconfig
is broken. It is unclear why the %_defconfig rule recurses in that case.
This patch internaly makes BR2_EXTERNAL canonical (ie. makes it an absolute
path), and checks the directory exists.
[Peter: s/relatively/relative/ as suggested by Thomas]
Reported-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mpg123 needs MMU because the application that is built with this
package uses fork. Currently it is difficult to only build the
libraries for mpg123 so disabling the package all together when there
is no MMU support.
Note: mpg123 is an optional dependency of mpd but mpd already requires
BR2_USE_MMU so there is no need to add this as a dependency.
Fixes:
http://autobuild.buildroot.net/results/5b0/5b053af566dd122ae7e58893e77d5d5f3070fb9e
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 87492d244a ("aiccu: disable
for uClibc 0.9.31/0.9.32"), we made sure it was not possible to select
aiccu with uClibc 0.9.31 and 0.9.32, because they lack dn_skipname().
However, we still have the problem that external AVR32 toolchains can
select aiccu, which causes build failures. Therefore, we also disallow
aiccu on AVR32 altogether. We keep the 0.9.31/0.9.32 exclusions,
because if they are used on other architectures, it would also fail
due to the lack of dn_skipname().
Fixes:
http://autobuild.buildroot.org/results/a24/a2490d434152625d9208615d83f4c5d6daea79d0/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libeina library uses the madvise() system call, that isn't
available on non-MMU systems. Also, several other components of EFL
use fork(). Therefore, the easiest solution is to simply disallow the
EFL as a whole on non-MMU systems.
Fixes:
http://autobuild.buildroot.org/results/ad9/ad90baa5e07569308a7e2b2510b67c5b2a563b44//
Thanks to Ryan Barnett for helping in the investigation!
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Evas has an optional mechanism to do asynchronous preloading of
images. This mechanism is optional, and in commit
b6d92bf415 ("libevas: async image
preload support needs threads support in toolchain"), Peter made sure
to disable the asychronous preloading when no thread support was
available.
Unfortunately, it seems like disabling the asynchronous loading is
rarely used, and it in facts fails to build: a member of structure is
not present when asynchronous preloading is disabled, but the code
continues to use it.
Since the fix is not obvious, and all this mechanism seems to have
changed completely in EFL 1.8.x, and we probably don't care much about
EFL without threads, this commit adds a dependency of libevas on
thread support. Consequently, it also reverts commit
b6d92bf415 which is no longer necessary.
Of course, this commit propagates this additional dependency to the
reverse dependencies of libevas.
Fixes:
http://autobuild.buildroot.org/results/6de/6de90018a9eeb9c495d15046a8b3270eb95a5550//http://autobuild.buildroot.org/results/693/693df99db4ab357b48d427be3a72f6d64dd53065//
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be sure that host-autoconf dependency is already built move the
call to autogen.sh from SDL_POST_PATCH_HOOKS to SDL_PRE_CONFIGURE_HOOKS.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The cross-compilation test is based on the ability to run
a test program on the host, which is wrong.
If it runs, then the configure script concludes
that we're doing native compilation,
if it doesn't run, we're doing cross-compilation.
The configure script needs to be regenerated to fix the
cross-compilation test.
Fixes
http://autobuild.buildroot.net/results/969/969a49ae97a50634ea846a82b9c360e4fb020ace/build-end.log
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ramfs (which is used instead of tmpfs if CONFIG_SHMEM isn't enabled in the
kernel configuration), defaults to mode 0755 instead of 01777 like tmpfs
uses.
/tmp should be world writable and sticky, so explictly enforce the mode so
ramfs users gets it correct instead of relying on the defaults.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The tvheadend configure script fails to correctly handle spaces in any of
the options passed to it. If ccache is used the configure script fails to
handle the space in the --cc option and errors. Also the --cflags option
fails to handle multiple entries and only uses the first one. This patch
simple removes setting the --cc and --cflags options as the configure
script will correctly use the CC and CFLAGS variables already passed in
TARGET_CONFIGURE_OPTS.
Signed-off-by: Martin Bark <martin@barkynet.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
AVR32 is using uClibc 0.9.31, which lacks some CAN related definitions
that prevent the gpsd nmea2000 driver from building.
The rest of gpsd, with all options and drivers enabled, builds fine on
AVR32.
Fixes:
http://autobuild.buildroot.org/results/ee2/ee2ec848e893f08fa80caf99a67e68b73b6400e8/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
coreutils was not building in the static link case with uClibc, due to
binaries being linked with librt (for timer functions), but not with
libpthread. However, librt uses functions from libpthread, so both
must be specified. This lack of linking against libpthread was caused
by a deficiency in one of the gnulib m4 macro, for which we add a patch.
Fixes:
http://autobuild.buildroot.org/results/bd4/bd4cc779b46e3837e3d6c43c97eaf42fdfc3a288/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pv configure script is somewhat stupid: if it cannot find the host
gettext tool msgfmt, it concludes that gettext is not available, and
provides its own minimal version. Unfortunately, this minimal version
conflicts with the available target gettext. We fix this by ensuring
that host-gettext is built if gettext support is enabled, by adding it
to the dependencies.
Fixes:
http://autobuild.buildroot.org/results/d30/d30db79190f2cf8953751d55a5d34644f60daec4/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
AArch64 does not implement the SYS_open system call, but only the
SYS_openat system call, as should be done for all modern architectures
merged into the Linux kernel. This causes problems when building
libv4l 0.8.9, which are fixed by integrating an upstream patch,
available in a more recent version of libv4l. Backporting the patch is
preferred over bumping libv4l, as libv4l has a fairly large number of
reverse dependencies, and we don't want to break anything that close
to the release.
Note that this commit also renames the existing libv4l-largefile.patch
to libv4l-01-largefile.patch in order to comply with the Buildroot
patch naming scheme, and guarantee the order in which patches are
applied.
Fixes:
http://autobuild.buildroot.org/results/ed6/ed66792e332ee0256a17f98cbe21dfcfe6e8743b/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 52eeb04c76 ('libsepol: fix
static-only library build') I forgot to git add the changes made to
the libsepol.mk file itself. Those changes are needed to actually pass
STATIC=<something> when building static libraries only.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It comes up every now and then on the list, so better be prepared to
point at the manual, rather than rehash the same every time.
Most of the chapter is a copy-paste of the report from the Buildroot
Developpers Day in Pragues, 2011-10-28:
http://lists.busybox.net/pipermail/buildroot/2011-November/047229.html
We consider the opinions expressed in that report to be still valid
now, two years later.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
icu does not recognize 'uclinux' as a supported platform. While making
it recognize uclinux is easy, there is another problem down the road:
icu does very weird things to generate an ELF library containing
static data (libicudata.a), and the generated library being ELF, it is
not compatible with the FLAT binary format expected by uclinux
platforms such as Blackfin in FLAT format.
Therefore, we simply disallow the selection of icu on FLAT
platforms.
Note that adding a dependency on BR2_BINFMT_ELF doesn't work, because
BR2_BINFMT_FDPIC is considered to be separate (even if technically
FDPIC is a derivative of ELF). That's why the dependency we're adding
is "depends on !BR2_BINFMT_FLAT" and not "depends on BR2_BINFMT_ELF".
Fixes:
http://autobuild.buildroot.org/results/b41/b415fed7fae4012bad7d8b53a481bd71bdab716f/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
webkit needs the ARM blx instruction, which is only available on >=
ARMv5t, so we have to make sure the webkit package cannot be enabled
on < ARMv5t. In order to achieve this, this commit introduces the
BR2_PACKAGE_WEBKIT_ARCH_SUPPORTS hidden Config.in knob, which avoids
duplicating all over the place the complex architecture dependencies
of webkit.
Fixes:
http://autobuild.buildroot.org/results/fdf/fdf8bc7660ac251792d0542d2729ea22753d3789/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a number of issues. From the changelog:
- Avoid getting stuck in a loop writing huge key files, reported by Bruno
Thomsen
- Avoid crash on exit due to cleaned up keys before last packets are sent,
debugged by Ronald Wahl
- Fix a race condition in rekeying where Dropbear would exit if it received a
still-in-flight packet after initiating rekeying. Reported by Oliver Metz.
This is a longstanding bug but is triggered more easily since 2013.57
- Ensure that generated RSA keys are always exactly the length
requested. Previously Dropbear always generated N+16 or N+15 bit keys.
Thanks to Unit 193
- Fix DROPBEAR_CLI_IMMEDIATE_AUTH mode which saves a network round trip if the
first public key succeeds. Still not enabled by default, needs more
compatibility testing with other implementations.
- Fix signal handlers so that errno is saved, thanks to Erik Ahlén for a patch
and Mark Wickham for independently spotting the same problem.
And at the same time get rid of the TIMEVAL_TO_TIMESPEC as dropbear provides a
fallback implementation if not available (and has done so since 2006).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
3.3.8 support is removed since 334dca61 (kernel-headers: remove deprecated
versions 3.1, 3.3, 3.5), so let's get rid of the patch as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove a leftover of the commit commit e543f5a104
(arch: remove sh2, sh3 and sh3eb support).
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
