BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS became ineffective in commit a5ce7590c4
(package/rpi-firmware: bump version), and was removed in commit 4e92ffdc47
(rpi-firmware: remove no longer used BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS).
Remove it from the Pi configs.
Also, remove the now obsolete comment in these config files.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Document the correct defconfig for ARMv7 based RPi-2.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For some (silly?) reason, the kconfig-package infra always wants
<pkg>_KCONFIG_FILE to be defined. So let's do like barebox does: use a
temporary AT91BOOTSTRAP3_SOURCE_CONFIG variable, and assign it to
AT91BOOTSTRAP3_KCONFIG_FILE. This way, the latter is always defined,
even if to the empty value.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In at91bootstrap3, defconfig files are spread out in various
sub-directories, so we can't easily construct the path to those
defconfig files.
As it turns out, there are no two defconfig files named the same; they
all contain at least the board name, plus some extra info. And there is
always only one directory depth below board/ where all defconfig files
are to be found.
Also, at91bootstrap3's own Makefile relies on this single-match as it
runs a 'find' command to locate the defconfig file.
So, even though we do not know the path to the defconfig file, we can
construct a shell-glob quite easily (in the hope that there will never
be more than one directory depth).
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
[yann.morin.1998@free.fr:
- remove custom _CONFIGURE_CMDS, handled by pkg-kconfig (Thomas)
- remove redundant intermediate variable
- fix using internal defconfig files
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When downloading from a repository, we explicitly pass no hash file,
because we can't check hashes in that case.
However, we're still printing a message that there is a missign hash
file.
Beside being a bit annoying (since we can't do anything about it), it
may also be wrong, especially for packages for which we support multiple
versions, with some being downloaded via a git clone and others as
tarballs.
Just print no warning when the path to the hash file is empty.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we bumped FreeRDP, vlc no longer builds:
http://autobuild.buildroot.org/results/8d9/8d91e3ffccee753135e9d0faa2b1ae00875606c9/http://autobuild.buildroot.org/results/e1f/e1f6526d1a4ac2c95998793efea2188faa708e29/
Fix that by bumping vlc to 2.2.0, as vlc-2.1.6will never support this
new version of FreeRDP.
Add dependency on kernel headers >= 3.7, because it needs DTV_STREAM_ID.
I stumbled on this whith a toolchain using headers forom 3.5, but only
tested with a toolchain with headers from 3.9, so there might be other
dependencies I missed on 3.8 or even 3.9. Let's wait for build failures
to find out...
There are quite a bunch of new --enable/disable options, so I've tried
to catter for all the changes. Most notably, there's no longer a flag to
enable.disable GL, it is now always auto-detected. Also, I've added
flags for GLES which we were missing so far, so we had to rely on the
build order to detect those dependencies (which was OK becasue libgles
sorts before vlc). Finally, SVG now has two flags to enable different
parts of SVG support, but they both depend on the same library, so
enable both.
There are new support for some features, like acceleration on RPI, but
that can well wait for further patches when someone is interested ;-) ,
vdpau HW accelearation on NVidia (we have a package for that, but not
able to test, so not added), vpx support (we have a libvpx package,
but I had no time to test), x262 and x265 support for which we're
currently lacking the packaging, and a few other exotic stuff...
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Clean up system directories by making samba conform to FHS and by using
subdirectories e.g. /var/log/samba and /var/run/samba instead of
/var/log and /var/run.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit improves the pkg-generic package infrastructure so that it
declares all the <pkg>-<something> targets as PHONY, which they
actually are.
[Thomas:
- add some missing phony targets, noticed by Yann E. Morin;
- put one target per line, order alphabetically. Makes it easier to
spot missing targets.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to implement the global 'make source', 'make legal-info' and
'make external-deps' using the package infrastructure logic, this
commit introduces a set of per-package targets that allow to
recursively run the source/legal-info/external-deps actions on the
dependencies of a given package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The global .PHONY specification in the main Makefile is describing a
number of directory targets as being PHONY, which doesn't make much
sense. PHONY targets are targets that do not exist on the filesystem,
and which make should always consider as not being up-to-date, so that
the commands associated to these targets are always executed by make
when the command is invoked, even if a file with the same name exists
on the filesystem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This comment is a left-over from previous code changes, and it doesn't
make much sense where it is placed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit implements a new <pkg>-external-deps target in the
pkg-generic package infrastructure. This target simply displays the
list of file names that are needed for <pkg> to build (source tarball,
patches, extra downloads).
In the case of the usage of <pkg>_OVERRIDE_SRCDIR, the path to the
overriden source directory is displayed, prepended by file://. This
matches what the code is currently doing in .stamp_rsync_sourced.
This new target is not currently being used in this commit, but
followup commits will make use of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The Buildroot manual is currently wrong when describing how patches
are applied: it says that <packagename>-*.patch is applied, and that
<packagename>-<seq>-*.patch is the recommended name for patches. This
is incorrect, since we're now using just <seq>-*.patch. This commit
adjusts the documentation accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Several packages have some logic to apply custom patches that existed
before the BR2_GLOBAL_PATCH_DIR mechanism: at91bootstrap,
at91bootstrap3, barebox, uboot and linux. Currently, the logic of
those packages to apply custom patches is to match
<package-name>-*.patch, which is not consistent with what we've done
for patches stored in the package directory, and for patches stored in
BR2_GLOBAL_PATCH_DIR: in such cases, we simply apply *.patch.
Therefore, for consistency reasons, this commit changes these packages
to also apply *.patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Add a config option to build the python bindings for i2c-tools -
py-smbus. The steps for building the python bindings is the same as
the distutil steps that are a part of the python infrastructure.
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Baruch Siach <baruch@tkos.co.il>
CC: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix a bunch of deficiencies:
- 'debian/copyright' does not exist.
- gnuefi is not GPLv2+. Only one AArch64 file has GPLv2+ headers,
all others have BSD-3c
- efilib is BSD-2c
Change the licensing information to include BSD-3c for the gnuefi parts,
and keep refernce to GPLv2+ as the Main README.gnuefi references it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Open-source GStreamer 1.0 plugins for i.MX6 platforms.
More info at https://github.com/Freescale/gstreamer-imx
[Peter: add upstream URL to help text]
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Rostislav Lisovy <lisovy@jablotron.cz>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Explicitly link against -lpthread and -lm.
Fixes ([1]):
checking for PQconnectdb in -lpq... no
checking for PQserverVersion in -lpq... no
postgresql . . . . . no (dependency error)
[1] http://autobuild.buildroot.org/results/926/926a43b8f635790d7e9abdc977ea803ddaf8a523/
[Thomas:
- Rebase on top of master
- Use += instead of =, which will avoid mistakes in the future.]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sorry, I was not careful enough when reworking the radeon parts...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
COPYING.GPL3 is not present in the sources.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The license is in fact MIT.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit modifies the last libtirpc patch to be a Git formatted
patch, i.e that can easily be imported using 'git am'.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise, the configure script fails with "Required program
pkg-config is missing".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- remove 003-allow-flags-from-environment.patch, and pass
TARGET_CONFIGURE_OPTS in the environment instead.
- convert the patches to Git formatted patches.
- use the v1.18 tag instead of a commit hash.
- do not pass TARGET_CONFIGURE_OPTS at install time, this is not
needed.]
Signed-off-by: Steve James <ste@junkomatic.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The tovid suite, also known simply as tovid, is a collection of shell
and Python scripts for creating DVDs and (S)VCDs. It is pronounced
"to vid" (because it converts to video disc formats).
[Thomas:
- remove largefile dependency
- properly propagate mplayer and ffmpeg dependencies.
- fix license: it's GPLv2+, not GPLv2.]
Signed-off-by: Steve Kenton <skenton@ou.edu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to allow other packages to easily select mplayer without
duplicating its complicated architecture dependencies, this commit
introduces a BR2_PACKAGE_MPLAYER_ARCH_SUPPORTS blind option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
