Add patch to avoid the enable/disable-debug options from unsetting -g
from CFLAGS in an incorrect way which breaks -mfloat-gprs=X (translit to
-mfloatprs=X).
It's possible to affect other less common CFLAGS with a '-g' in any
position.
Upstream status: sent different patch (configure.ac) - to avoid
autoreconfiguring.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The previous no-op dhclient-script is useless and in fact can lead
users to believe things will work.
dhclient-script is supposed to, among many other things, bring the
interface up for dhclient to pump an address, set the interface
address, set resolv.conf appropiately and set the default gateway.
It's a complex script since it has to deal with a lot of details so
let's just use the best fit which is the OpenWRT one since it uses the
"legacy" tools (ifconfig, route, ...) which can be easily provided by
busybox and/or net-tools.
There are newer and more feature-complete versions around but they
require full iproute2 ip and wouldn't fit as well with the busybox-only
approach.
License: likely GPLv2+
Source:
http://git.openwrt.org/?p=packages.git;a=blob;f=net/isc-dhcp/files/dhclient-script;h=4afebc0ad20ebac51c5baae5ed01c6713e3a0fd0;hb=HEAD
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2014-8767 - denial of service in verbose mode using malformed OLSR
payload
OLSR payload
CVE-2014-8768 - denial of service in verbose mode using malformed Geonet
payload
CVE-2014-8769 - unreliable output using malformed AOVD payload
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Qt Webkit Module uses pthread_getattr_np() which is implemented in
toolchains with NPTL. Otherwise the compilation will fail showing this
error message:
wtf/StackBounds.cpp: In member function ‘void
WTF::StackBounds::initialize()’:
wtf/StackBounds.cpp:172:38: error: ‘pthread_getattr_np’ was not declared
in this scope
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Qt Script Module uses pthread_getattr_np() which is implemented in
toolchains with NPTL. Otherwise the compilation will fail showing this
error message:
../3rdparty/javascriptcore/JavaScriptCore/runtime/Collector.cpp: In
function ‘void* QTJSC::currentThreadStackBase()’:
../3rdparty/javascriptcore/JavaScriptCore/runtime/Collector.cpp:692:42:
error: ‘pthread_getattr_np’ was not declared in this scope
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Somehow busybox thinks debian standards are the rule and installs lspci
to /usr/bin instead of /usr/sbin where upstream says it belongs.
So install pciutils binaries there as well to really win over busybox
PATH-wise and overwrite the little bugger symlink.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
An API for user space programs to perform 2D accelerated graphics operations
on AMD GPU
[Thomas:
- merge in the same patch the patch switching to the freescale-imx
extract helper.
- remove the dependency on "depends BR2_arm", since anyway the
package Config.in file is only included if we are using the i.MX51
or i.MX53 platforms.
- use full installation paths (i.e $(INSTALL) -D), and install
libraries 755, as it usually done.]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- reword the comment of the new macro, and add details about the
expected arguments, as suggested by Yann E. Morin.
- rework the logic to move the files in $(@D), as it was simply not
working in the original patch. $(basename $(1)) was used to get the
filename without the extension, but it also contains the full
path. $(basename $(notdir $(1))) is needed.]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Bump version to 2.2.0
- Update the hash value
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Bump version to 2.02.113
- Update the hash value
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All patches upstream and add hash file.
[Thomas: remove AUTORECONF = YES, since we no longer have any
patches touching configure.ac/Makefile.am]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- put liburiparser at the right place in package/Config.in, i.e
sorted alphabetically
- use positive logic for the wchar test.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
babeltrace is used to read the traces generated by lttng, but it doesn't
depend on lttng-tools.
Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add semi-automatic libgcrypt dependency for i386/x86_64 to use RDRAND.
This is exclusively used by rngd for which we don't yet ship an
initscript/service file. Even so the user can choose to disable it at
invocation time via the --no-drng option (which must be accounted for).
Also add hash file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libnss_wins and libnss_winbind libraries are required in order to
add support for the wins and winbind sources to the Name Service Switch
(NSS), so make it possible to install them. This is useful in order to
resolve NetBIOS names or user and group information from a Windows NT
server.
These libraries are installed to /lib/ like the standard libnss_*
libraries from (E)GLIBC.
[Thomas: remove useless comments.]
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Guile is an interpreter and compiler for the Scheme programming
language, a clean and elegant dialect of Lisp.
The patch guile-01-fix_arm_endianness.patch is based on guile's
git commit ^ffd3e55cfd
[Thomas:
- rewrap comments and help text.
- add missing host-gettext dependency, since gettext.m4 is needed for
the package to autoreconf.
- add missing host-pkgconf dependency.
- add dependency on wchar, inherited from libunistring.]
Signed-off-by: Pedro Aguilar <paguilar@paguilar.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though libunistring itself builds fine, its library contains
undefined references to wchar related functions, which are causing
link failures when the library is actually linked into an application.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
bdwgc is a garbage collector for C and C++. The Boehm-Demers-Weiser
conservative garbage collector can be used as a garbage collecting
replacement for C 'malloc' or C++ 'new'.
[Thomas:
- drop the dependency on host-bdwgc, since it is not needed. Only
host-guile will need host-bdwgc, but bdwgc itself doesn't need
host-bdwgc.
- add dependency on host-pkgconf, needed to detect libatomic_ops
- add --with-libatomic-ops=yes to force bdwgc to use the system
libatomic_ops, and not the internal one.
- instead of using BDWGC_LIBTOOL_PATCH = NO (needed to avoid patching
libtool because the libtool version used by bdwgc does not have a
corresponding patch in Buildroot), use BDWGC_AUTORECONF = YES,
which generates a proper libtool (without this, some -L/usr/lib
flags are added by libtool).]
Signed-off-by: Pedro Aguilar <paguilar@paguilar.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The host-libatomic_ops is needed by host-bdwgc that is needed
in turn by guile.
Signed-off-by: Pedro Aguilar <paguilar@paguilar.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The pidof -o option is only available in the Busybox applet if
CONFIG_FEATURE_PIDOF_OMIT is enabled, and it isn't really needed here as the
init script isn't called 'NetworkManager', so get rid of it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add hash file and switch to a non-dead homepage.
Enable for supported architectures: powerpc64 & powerpc64le.
Even though aarch64 is supported it's still a bit rought resulting in
build failures so don't enable it for now.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
NM only currently supports isc-dhcpc and dhcpcd as clients because NM
communicates with the client through DBus, and support for clients needs to
be written in. (as per files in src/dhcp-manager)
Buildroot's default, udhcpc is not supported.
Add the dependencies to Config.in, favoring dhcpcd as
default due to size.
[Peter: drop references to dhclient, isc-dhcpc is dhclient]
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes the following build errors seen when assembling huge files
produced by gcc:
Error: jump target out of range; no usable trampoline found
Error: operand 1 of 'j' has out of range value '307307'
Fixes:
http://autobuild.buildroot.net/results/545/545168d9caf3bdb3dd3eb3bae58ba9db8a33384a/
Backported from: d92b6eece424f0ad35d96fdd85bf207295e8c4c3
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Not all arm (E.G. non-VFP) toolchains define the control word macros, so
disable debug handling for arm(eb) as well.
As the debug handling has limited value (it simply forces CFLAGS which we
don't want and enables exceptions on FP errors) don't try to be clever about
what toolchain variants to disable it for, but just disable it for all arm(eb).
Fixes http://autobuild.buildroot.net/results/672/672a31c0bd329dec566ba74e0e1be43abd0f16c2/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a buffer overflow in ksba_oid_to_str.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
clamav unconditionally includes dlfcn.h which is missing on a uClibc
that is configured as a pure-static C library.
Thus, the build fails.
But the including file does not even makes use of any function from the
dlopen() familly, so it does not need to include dlfcn.h to start with.
Add a patch to clamav to not include dlfcn.h where not needed.
Fixes:
http://autobuild.buildroot.net/results/b49/b491f4e5e1760248adb8d21b404e8aa15f7dbdd1/
[Peter: fix typo in patch description]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes an out-of-bounds memory access in png_user_version_check().
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: fix the license, it is MIT, not BSD-3c.]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libshairplay uses dlopen to open libdnssd at runtime (unless dlopen() isn't
available, then static linking is used - But avahi depends on
!BR2_PREFER_STATIC_LIB so that isn't possible), so ensure avahi is available.
Fixes http://autobuild.buildroot.net/results/54d/54de48b23439cef4cbea3b8a65b20e2a8b049f67/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Modern architectures such as ARC do not provide the sysctl() system
call, since it is deprecated. However, uClibc still installs
<sys/sysctl.h> in such cases, which defeats radvd check for the
availability of sysctl(). This commit adds a patch to radvd which
improves the sysctl() checking.
Fixes:
http://autobuild.buildroot.org/results/458/4581c4220adeaebbf6761e3b923088d8de8522d5/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit renames the radvd patches to follow the new naming
convention, and reformats them to be Git patches.
Since the patches are renamed, we adjust the comment in the .mk file
explaining why we autoreconf the package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The ushare configure script is a custom shell script, and it is not
designed to understand that the library order is important when doing
static linking.
Fixes:
http://autobuild.buildroot.org/results/32e/32ed2a521043f929cc290145c8a651e69042e104/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit adds a patch to mpdecimal that makes it understand
--enable-shared/--disable-shared and --enable-static/--disable-static,
even if mpdecimal isn't using automake/libtool. It allows to build
only the static variant of the mpdecimal library when needed.
Fixes:
http://autobuild.buildroot.org/results/276/2764bd8c42ba659682760ffc6afa933b7530d06c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Because the svn repository url was changed the command "make
sstrip-source" gives this error:
svn: E000101: Unable to connect to a repository at URL 'svn://dev.openwrt.org/openwrt/trunk/tools/sstrip'
svn: E000101: Can't connect to host 'dev.openwrt.org': Network is unreachable
To fix this error use the correct url "svn://svn.openwrt.org/openwrt".
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we apply the libtool patch at post-patch time, always. If we
need to autoreconf, we also apply it after autoreconf is done.
Obviously, in that second case, we do not need to apply it at
post-patch time. This has no impact on the result, as autoreconf will
overwrite the just patched files, and they will be patched yet again.
But it is not nice to the user that will see a double "Patching libtool"
message.
So, we apply the libtool patch at post-patch time only if we are not
autoreconfiguring the package.
[Thomas: fix minor typo s/casse/case/ in the commit log.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We now have only one caller of the libtool patching code, which is the
hook itself.
So, there is no longer any need to extract this code into a utility
function, and it can be folded into the hook itself.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libtool patching function checks whether patching libtool is wanted
before doing the actual patching.
This is redundant now, as all callers are now protected by a conditional
block.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Call it as a standalone hook, like is done for post-patch.
[Thomas: change back the author to Johan. Yann mistakenly changed it
when submitting the patch series.]
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[yann.morin.1998@free.fr: split the patch into semantically separate
patches]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the heuristic to patch libtool scripts is duplicated both in
the libtool post-patch hook and the autoreconf pre-configure hook.
Move that code into a single function that gets called from both hooks.
[Thomas: change back the author to Johan. Yann mistakenly changed it
when submitting the patch series.]
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[yann.morin.1998@free.fr: split the patch into semantically separate
patches]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move the host dependencies cleanup out from in-between all the hooks, so
it is easier to see how the hooks all work together.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the common macros used for the various hooks are defined for
each and every autotools packages, even though the macros are completely
generic.
Besides being completely useless, it tends to slow down make, as the
variables are redefined over and over again.
Move their definitions out of inner-autotools-package.
Note: we remove the double-$ because we no longer are in a
define-in-a-define block, just a define block.
[Thomas: change back the author to Johan. Yann mistakenly changed it
when submitting the patch series.]
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[yann.morin.1998@free.fr: split the patch into semantically separate
patches]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If host installed python version is < 2.7.0 gst1-validate compile will fail with
checking for a Python interpreter with version >= 2.7.0... none
configure: error: no suitable Python interpreter found
Fixed by adding host-python dependency.
Target tool /usr/bin/gst-validate-launcher is a python2 script
$ head -1 /usr/bin/gst-validate-launcher
#!/usr/bin/env python2
(and not easily upgradable to python3) so add python2 dependency and to fix
the following runtime error
$ gst-validate-launcher
Traceback (most recent call last):
File "/usr/bin/gst-validate-launcher", line 44, in <module>
from launcher.main import main
File "/usr/lib/gst-validate-launcher/python/launcher/main.py", line 26, in <module>
import reporters
File "/usr/lib/gst-validate-launcher/python/launcher/reporters.py", line 29, in <module>
from xml.sax import saxutils
ImportError: No module named xml.sax
add additional BR2_PACKAGE_PYTHON_PYEXPAT select.
Fixes:
http://autobuild.buildroot.net/results/e8c/e8c27db2a0935c2daef173d5650f6a2b3a219493/http://autobuild.buildroot.net/results/723/723fe3036e8f0af2a90ff9e98173387466655000/
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
in order to not depend on the previous permissions of the file
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add a hash file.
The release announcement
(http://www.omniorb-support.com/pipermail/omniorb-list/2014-April/031550.html)
mentions support for python3, but I could not make it work. Stay with python2
for now.
Cc: Matt Weber <mlweber1@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: update the dependencies of the comment to take into account
that we can now also build with Python 3.]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The build/real prefix handling using sed breaks if build != real and the
standard include / lib directories are used ($prefix/include and $prefix/lib).
E.G.
prefix_build="/usr", libdir="$prefix/lib", includedir="$prefix/include".
If this gets installed with make DESTDIR="/foo" install, then we end up with
prefix_real = prefix = "/foo/usr" as expected, but
includedir="/foo/foo/usr/include" and libdir="/foo/foo/usr/lib" because of
the double sed invocation (prefix is already expanded). Work around it by
ensuring we only match the beginning of the string.
Submitted upstream: http://bugs.python.org/issue22907
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch is not needed anymore as the proper includes can be specified
using PYTHON_INCLUDES, and version/pythondir/pyexecdir is correctly detected
using host-python.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Version 0.10.4 is compatible with python 3.
[Thomas: change the patch to simply remove the dependency on
BR2_PACKAGE_PYTHON, so that the package can be seen when either python
or python3 are used.]
Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- use "make install", which allows to remove the custom installation
logic in mcelog.mk.
- no need to explicitly pass CFLAGS and CPPFLAGS when doing the
build, since those definitions are already part of
$(TARGET_CONFIGURE_OPTS).]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
erlang wants to build shared libs, always.
So, disable erlang when we're building static-only.
Fixes:
http://autobuild.buildroot.net/results/1ce/1ceaa6925d1ded236d01ae9feb31f5f915f6b51a/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for Exiv2 library and utility to manage image metadata
Exiv2 can be built in GPLv2+ or commercial version. But in commercial
version the Nikon lens name database and the NLS support has to be
disabled for copyright reason.
[Thomas:
- switch to using the CMake build system, which works better than the
clunky autoconf + manual Makefile based build system.
- add missing toolchains dependencies: does not build in static
library configuration, needs C++, etc.]
Signed-off-by: Nicolas Serafini <nicolas.serafini@sensefly.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't need the documentation, so it is a waste of time - And more
importantly, the .dot file isn't compatible with all graphviz versions
breaking the build.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 33de740170 ("Makefile:
convert "target-generatelocales" to a hook"), the GENERATE_LOCALE
variable is never defined when using uClibc. This means that setting
any value to the BR2_GENERATE_LOCALE option had no effect for uClibc
toolchains.
In this commit, we make sure the uclibc.mk logic re-creates its own
qstripped version of BR2_GENERATE_LOCALE, in a variable called
UCLIBC_GENERATE_LOCALES.
This fixes locale generation with uClibc in the internal toolchain
backend.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The previous shutdown sequence was basically a no-op, it did't call rcK
to stop anything and dumped users back into shell.
So do the proper thing by calling rcK for levels 0 (halt) and 6
(reboot), then swapoff, then remount ro.
After that call halt for 0 and reboot for 6.
Also make 3 the default runlevel as in normal distributions, for all
intents and purposes it changes nothing except aesthetics/convention.
And make the labels a context sequence rather than just a short form
of the actions which IMHO looks horrible.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2013-6497 - the jwplayer.js file causes ClamAV to seg fault when
scanned with the -a (list archived files).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
canfestival doesn't really support static build. The configure script accepts
the --disable-dll parameter that should in theory allow a static build. In
practice this options is not well tested, as it causes the build to fails in
various places.
Fixes:
http://autobuild.buildroot.net/results/29f/29fd3e550937f48e2270149a3d44cfb8bcf5c16a/
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Change LIBFOO_PERMISSIONS everywhere to be a space-separated list.
As nothing was specified in the manual but all our lists are space
separated, there is no reason that this one should be made an exception.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
dhclient and dhcpcd were moved from /usr/sbin to /sbin for busybox-less
SysV-style init with Debian utilities, so adjust accordingly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop the custom/manual install cmds and do a normal make install.
This gets dhcpcd-hooks installed which are useful for many accesory
setup functions like dns, ntp server, and so on.
Also install dhcpcd to /sbin since it's expected by debian ifupdown,
For busybox ifupdown when external dhcp clients are enabled (not in the
default config we ship) will search the path.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Bump version to 0.160
- Add a hash file
- Adapt patches to the new version
- Add a new patch to really make -Werror conditional to BUILD_WERROR
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
shairport-sync uses libdaemon for running as daemon and creating the pidfile
which conflicts with start-stop-daemons `-b -m` options. For that reason
shairport-sync does not start using /etc/init.d/S99shairport-sync start.
The issue is fixed by removing the background and pidfile task from
start-stop-daemon and add a daemon option `-d` to shairport-sync.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Bump version to 3.8.7.2
- Update hash value
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Bump version to 2.02.112
- Update hash value
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Bump version to 2.1.3
- Add a hash file
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As discussed on the list:
http://lists.busybox.net/pipermail/buildroot/2014-November/112509.html
We currently have a mix of python packages explicitly depending on python ||
python3 in their Config.in and packages that don't. As all python packages
are inside a python || python3 conditional in the main Config.in, the
explicit dependencies inside the package Config.in is redundant, so drop it
for consistency.
Automated using:
sed -i '/depends on BR2_PACKAGE_PYTHON.*PYTHON3/d' package/python-*/Config.in
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
See [1] for details.
Change download url and source package format to enable usage of
upstream provided hash values.
Patches
- evemu-0001-SYN_MAX.patch
- evemu-0003-make-event-names-use-input.h-from-sysroot-instead-of.patch
are obsolete as there is no more host side python script for event name generation.
Patches
- evemu-0002-configure.ac-add-disable-tests-option.patch
- evemu-0005-configure.ac-add-disable-python-bindings-option.patch
are committed upstream.
[1] http://lists.freedesktop.org/archives/input-tools/2014-November/001122.html
[Thomas: drop EVEMU_AUTORECONF = YES, since we're now using a tarball
that has the configure script already generated, and we no longer have
patches touching the configure.ac/Makefile.am]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Both config.linux and config.linux-with-shared-libraries already exist
in upstream code. We are only appending to these files to override
some variables. The linux-with-shared-libraries variant defines a few
additional variables needed for dynamic linking (library version,
installation target).
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use LIBS instead of LDFLAGS for "-lintl", otherwise LDFLAGS gets
evaluated to the left of object files and fails to link statically
because of incorrect symbol resolution order. Fixes:
http://autobuild.buildroot.net/results/21b/21bf88c9dbaecc204598e60dd9c7392a85068dd6/
Also rename patch to new naming convention.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
in order to not depend on the previous permissions of the file
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add optional dependency on Busybox, because debianutils
installs its own version of which, so we need to override the Busybox
one.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move include directories out of $(STAGING_DIR)/usr/include/live. This is
upstream choice, and is consistent with e.g. Debian. Update mplayer and vlc to
match.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Needed to add support for host-python3
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit e712638b4a.
The config options --without-ssl2 and --without-ssl3 are intended to be used if
nodejs is built with the bundled OpenSSL library for excluding the SSL2 and
SSL3 features.
Both options are actual only evaluated if --without-ssl is not set:
$ cat configure | grep configure_openssl -n -A 13
619:def configure_openssl(o):
620- o['variables']['node_use_openssl'] = b(not options.without_ssl)
621- o['variables']['node_shared_openssl'] = b(options.shared_openssl)
622- o['variables']['openssl_no_asm'] = (
623- 1 if options.openssl_no_asm else 0)
624-
625- if options.without_ssl:
626- return
627-
628- if options.ssl2:
629- o['defines'] += ['OPENSSL_NO_SSL2=1']
630-
631- if options.ssl3:
632- o['defines'] += ['OPENSSL_NO_SSL3=1']
[Peter: adjusted commit text to make it clear that it is a revert]
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Tested-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If the destination directory already exists (e.g. because of a re-run or
a custom skeleton), then the zoneinfo files will be installed in a
sub-directory of where we are trying to install them.
Fix that by creating the destination directory and copying the content
of the source directory.
Also fix the host install commands to match what we do in the target
install commands.
Reported-by: Martin Dorwig <dorwig@tetronik.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
