Remove ADI toolchain 2012R1 package kludges since that version is gone
since the last bump.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2014-1684: The ASF_ReadObject_file_properties function in
modules/demux/asf/libasf.c in the ASF Demuxer in VideoLAN VLC Media
Player before 2.1.3 allows remote attackers to cause a denial of service
(divide-by-zero error and crash) via a zero minimum and maximum data
packet size in an ASF file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also make the menu entry less melodramatic.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently we configure uClibc to use kernel headers from "staging" folder with
KERNEL_HEADERS="$(STAGING_DIR)/usr/include". This path is added to include
search path of uClibc build system in Rules.mak "CFLAGS += -I$(KERNEL_HEADERS)".
At the same time on uClibc installation to "staging" we point to the same
location "$(STAGING_DIR)/usr" (headers effectively go in "usr/include").
So after every installation to "staging" dependences get touched (even though we
copy the same headers every time) and so we may see lots of sources in uClibc
get rebuilt.
This has 2 consequences:
1. Longer build time - becase even on ordinary buildroot build uClibc is built
twice. On "uclibc building" and on "uclibc installation to target".
2. Symbols in libuClibc built initially (that is later installed in
"staging/sysroot") are situated with different offset compared to second build
(later copied in "target"). This happens because as described above only part
of sources get rebuilt and then on final linkage object files are linked in
different order.
And (2) leads to problems on remote rebugging: gdbserver reports offsets that
correspond to pointless assembly in libuClibc on host.
Here's how it looks like.
Before this patch:
$ cd ~/br2_output/i586/target/lib
$ i586-buildroot-linux-uclibc-readelf -s libuClibc-0.9.33.2.so | grep kill
423: 0000c42c 54 FUNC GLOBAL DEFAULT 7 kill
$ cd ~/br2_output/i586/staging/lib
$ i586-buildroot-linux-uclibc-readelf -s libuClibc-0.9.33.2.so | grep kill
423: 0000b518 54 FUNC GLOBAL DEFAULT 7 kill
After this patch:
$ cd ~/br2_output/i586/target/lib
$ i586-buildroot-linux-uclibc-readelf -s libuClibc-0.9.33.2.so | grep kill
423: 0000b518 54 FUNC GLOBAL DEFAULT 7 kill
$ cd ~/br2_output/i586/staging/lib
$ i586-buildroot-linux-uclibc-readelf -s libuClibc-0.9.33.2.so | grep kill
423: 0000b518 54 FUNC GLOBAL DEFAULT 7 kill
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Noam Camus <noamc@ezchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The fltk buildsystem no longer tries to strip binaries during installation,
so these can be dropped.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For example, if your project is known to require more space than the
default max cache size, then you might want to increase the cache size
to a suitable amount using the -M (--max-size) option.
The string you specify here is passed verbatim to ccache. Refer to
ccache documentation for more details.
These initial settings are applied after ccache has been compiled.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 433290761f changed the hard-coded
ccache directory location to use BR_CACHE_DIR (then BUILDROOT_CACHE_DIR),
which is exported by Makefile based on the BR2_CCACHE_DIR config option.
This allowed the cache location to be changed on-the-fly by setting a
"make" command line variable, but left the default location of ccache's
normal default at "$HOME/.ccache". Since this location does not match the
default for BR2_CCACHE_DIR, it is basically almost never correct, so
direct invocation of ccache outside of the buildroot Makefile, such as for
increasing the cache size, becomes cumbersome.
This patch changes the last-ditch cache location from "$HOME/.ccache" to
the BR_CCACHE_DIR value defined when host-ccache is configured. Note that
the ability to later override the cache location by using a BR_CACHE_DIR
command line variable is left intact.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the specific check that was done in dependencies.sh to use the
generic one that were introduced by the previous patch.
Also, introduce, BR2_NEEDS_HOST_JAVAC and BR2_NEEDS_HOST_JAR as it is
needed by classpath.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sources of the mkpasswd package are shipped with Buildroot, rather than
downloaded from an external location. As a result, no explicit version is
defined, causing build messages and build directory to show 'undefined' as
version.
This patch sets the version for mkpasswd to 'buildroot-$(BR2_VERSION), which
would for example expand to 'buildroot-2014.05'.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sources of the makedevs package are shipped with Buildroot, rather than
downloaded from an external location. As a result, no explicit version is
defined, causing build messages and build directory to show 'undefined' as
version.
This patch sets the version for makedevs to 'buildroot-$(BR2_VERSION), which
would for example expand to 'buildroot-2014.05'.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As mentioned in the e-mail accompanying the introduction of the pkg-virtual
infrastructure [1], the definition of FOO_VERSION is 'strange'.
After the cleanup of single/double dollar signs in inner-generic-package,
the special construction in pkg-virtual is no longer needed and can be
simplified.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[1] http://lists.busybox.net/pipermail/buildroot/2014-April/093670.html
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As the rules with respect to variable and function references and the need
for single or double dollar signs are not trivial, add a comment in
pkg-generic.mk describing them.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The inner-xxx-targets in the buildroot package infrastructures are
evaluated using $(eval) which causes variable references to be a bit
different than in regular make code. As we want most references to be
expanded only at the time of the $(eval) we should not use standard
references $(VAR) but rather use double dollar signs $$(VAR). This includes
function references like $(call), $(subst), etc. The only exception is the
reference to pkgdir/pkgname and numbered variables, which are parameters to
the inner block: $(1), $(2), etc.
This patch introduces consistent usage of double-dollar signs throughout the
different inner-xxx-targets blocks.
In some cases, this would potentially cause circular references, in
particular when the value of HOST_FOO_VAR would be obtained from the
corresponding FOO_VAR if HOST_FOO_VAR is not defined. In these cases, a test
is added to check for a host package (the only case where such constructions
are relevant; these are not circular).
Benefits of these changes are:
- behavior of variables is now again as expected. For example, setting
$(2)_VERSION = virtual in pkg-virtual.mk will effectively work, while
originally it would cause very odd results.
- The output of 'make printvars' is now much more useful. This target shows
the value of all variables, and the expression that led to that value.
However, if the expression was coming from an inner-xxx-targets block, and
was using single dollar signs, it would show in printvars as
VAR = value (value)
while if double dollar signs are used, it would effectively look like
VAR = value (actual expression)
as is intended.
This improvement is for example effective for FOO_DL_VERSION, FOO_RAWNAME,
FOO_SITE_METHOD and FOO_MAKE.
The correctness of this patch has been verified using 'make printvars',
'make manual' and 'make legal-info' before and after applying this patch,
and comparing the output.
Insight-provided-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libdrm has a bunch of useful test programs. Add an option to pass
the configure option to install them.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add and enable a systemd unit file to bring up or down network with ifup /
ifdown, analogous to the skeleton/etc/init.d/S40network init script.
Signed-off-by: Ivan Sergeev <vsergeev@kumunetworks.com>
[eric.le.bihan.dev@free.fr:
- rebase
- install service only if systemd-networkd is not selected]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2014-4020 (The frame metadissector could crash).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The old ncurses trick is no longer needed for this version, in fact it's
harmful. Switch to proper configure options.
Also disable rpath hackery since it's not required and could be
problematic. Fixes:
http://autobuild.buildroot.net/results/411/411f6171e972eab4486143dedbfd078136886ab0/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the switch to 4.8.x as default, the qemu-sparc target is broken.
For a gcc bug report see here:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=60624
Switch back to gcc 4.7.x as default for sparc.
Disable 4.8/4.9 as suggested by Thomas Petazzoni.
I even disabled gcc snapshot, it works right now, because
it is an old 4.8.0 snapshot by default, but as soon as this is updated
sparc build will break.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Kernel headers version 3.8.x has been deprecated since 2013.08 and thus can
be removed in 2014.08.
An automatic selection of 3.9.x headers is performed in the legacy menu.
Existing automatic selections of 3.8.x headers are modified to select
3.9.x.
As this patch removes the last occurrence of BR2_DEPRECATED_SINCE_2013_08,
the symbol is removed too.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a number of security issues and adds support for PUT/DELETE. From the
release mail:
<snip>
Stephen Röttger reported a number of security bugs, the most serious of
which is a potential heap overflow in sliding_buffer.c (file uploads).
There is a potential for remote code execution.
At the same time, I've made an *experimental* change to allow RESTful
API's possible:
* PUT and DELETE methods are handled by the POST and GET handlers.
* For mostly historical reasons, data on the URI is still called
GET.<var>, and data in the body is named POST.<var>
* If the Content-Type is not "application/x-www-form-urlencoded", Haserl
won't try to urldecode the POST contents - it will just put the body in
POST.body verbatim.
</snip>
The lua handling now uses pkg-config, so adjust the code to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even when compiled with --enable-static --disable-shared, util-linux
creates some incorrect libuuid.so, libblkid.so and libmount.so
symbolic links, which confuses the compiler which thinks that a shared
library is available. This causes some build issues such as:
http://autobuild.buildroot.org/results/990/9909d198ce14969d0e9d29a34fcc33f0ef79220d/
This commit fixes that by adding a patch to util-linux that fixes this
issue. The patch has been submitted upstream at
http://article.gmane.org/gmane.linux.utilities.util-linux-ng/9262.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
NM provides a newt based UI. One can create, modify and delete NM
connections via this interface.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch fixes compilation error and is already upstreamed.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: use http url as wget complains about certificate]
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch provides service files for using psplash on embedded devices
running systemd:
- psplash-start.service: start psplash.
- psplash-quit.service: kill psplash when reaching multi-user.target
The following kernel command line options should also be set:
systemd.show_status=0 quiet splash
The option "systemd.show_status=0" is required, because, unlike Plymouth,
psplash does not have real systemd integration, i.e. it will not perform:
kill(1, SIGRTMIN + 21);
Note that no progress messages will be printed on the splash screen.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch installs a copy of libgcrypt.m4 from the libgcrypt source tarball
to systemd m4 directory.
Libgcrypt uses a custom m4 macro and not pkg-config to check if the
development files are available. Though libgcrypt support is optional in
systemd, this macro should be available whenever autoreconf is used,
otherwise the re-configuration will fail with:
configure.ac:616: warning: macro 'AM_PATH_LIBGCRYPT' not found in library
The call to autoreconf is required, as it is needed by the patch which
solves the `ln --relative` issue.
As asking the user to install the development package of libgcrypt on
the host machine or adding libgcrypt as a build dependency to systemd is
not acceptable, the required file is added to the m4 directory.
Fixes: http://autobuild.buildroot.net/results/1524d346fa17749e2ae62e063b9cfdd0de95c76a/
Fixes: http://autobuild.buildroot.net/results/10bcd92437eaa27eb61f8281c93efcb53d555e35/
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A tag has been created, so we should uses it.
This bump of version integrates the patch we had so there is no need for
it anymore.
Also, with this tag, faifa changed it's license to BSD-3c.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes http://autobuild.buildroot.net/results/77e/77e4123a3ddc934efedf4b09adc2436421ee70b3/
liblua only uses libdl when dynamic linking is used, and certain toolchains
(E.G. bfin) doesn't provide a libdl - So only link against it if it is
needed.
At the same time change it pass the library in LIBS instead of LDFLAGS so it
ends up at the end of the linker cmdline.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Packages shouldn't strip executables by themselves, so that Buildroot
controls whether stripping should occur or not. This also fixes the
build on Blackfin FLAT where stripping actually doesn't work because
stripping FLAT binaries is not supported.
Fixes:
http://autobuild.buildroot.org/results/7d4/7d4e59c96928a06db5091235bf2eacf462ba8a21/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This makes sure that a patch adding a package shows in which menu the
package is added.
Before this commit, the patch has something like this:
> diff --git a/package/Config.in b/package/Config.in
> index 7800f23..433312e 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -864,6 +864,7 @@ source "package/googlefontdirectory/Config.in"
> source "package/haveged/Config.in"
> source "package/mcrypt/Config.in"
> source "package/mobile-broadband-provider-info/Config.in"
> +source "package/mypackage/Config.in"
> source "package/shared-mime-info/Config.in"
> source "package/snowball-init/Config.in"
> source "package/sound-theme-borealis/Config.in"
[> added to avoid git-am recognizing this as the patch]
After this commit, the function marker shows in which menu the new
package was added:
> diff --git a/package/Config.in b/package/Config.in
> index b1111c8..7e6e1a4 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -864,6 +864,7 @@ menu "Miscellaneous"
> source "package/haveged/Config.in"
> source "package/mcrypt/Config.in"
> source "package/mobile-broadband-provider-info/Config.in"
> + source "package/mypackage/Config.in"
> source "package/shared-mime-info/Config.in"
> source "package/snowball-init/Config.in"
> source "package/sound-theme-borealis/Config.in"
To keep things consistent, this is done for Config.in.host there, even
though we don't have sub-menus there at the moment.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
supervisor has a runtime dependency on python-setuptools which was not
expressed in its Config.in file. When running supervisor without setuptools,
one gets:
Starting supervisord: Traceback (most recent call last):
File "/usr/bin/supervisord", line 5, in <module>
from pkg_resources import load_entry_point
ImportError: No module named pkg_resources
Partially fixes bug #7184 (https://bugs.busybox.net/show_bug.cgi?id=7184)
Reported-by: Sebastian Himberger <sebastian@himberger.de>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It seems there won't be any new release soon (or ever), so update to the
latest pre version for better functionality (non-ASCII ESSIDs, bigger
scan buffer for example).
Also update the bzero deprecation patch since it missed some instances.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To get reproducable builds depend on libiconv if needed.
tvheadend configure either shows
checking for cc libiconv ... fail
or
checking for cc libiconv ... ok
depending on the presence of libiconv, and gets linked
output/host/usr/bin/i586-buildroot-linux-uclibc-readelf -a output/target/usr/bin/tvheadend | grep NEEDED | grep iconv
0x00000001 (NEEDED) Shared library: [libiconv.so.2]
Please note that libiconv is not a hard-dependency.
Tested with minimal defconfig
BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y
BR2_PACKAGE_LIBICONV=y
BR2_PACKAGE_TVHEADEND=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This variable is looked up by the Makefile throught a git command line
invocation.
Since we don't keep the '.git' folder in the packages when we clone
them, the command line fail to find anything.
Even worse, it can keep going up the tree until it finds buildroot's
'.git' directory.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
SDK 5_01_01_01 only support EABIhf so 5_01_00_01 is still used if
EABIhf is not available.
Signed-off-by: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With certain toolchains, znc fails to build due to missing <time.h>
inclusions. This commit fixes that by adding a patch that adds those
missing inclusions.
Fixes:
http://autobuild.buildroot.net/results/86e/86e5e76a6ccc1396cd84107af63cdaa0ce1dfbee/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also install the SysV initscripts from the proper hook.
Since the scripts check for the proper files to be present there's no
need to exclude them according to options since they won't try to start
anything.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The perl-cross tarball allows to patch the Perl distribution (in a
_POST_EXTRACT_HOOKS). The github helper gives a copy of the project which
allows to build this tarball. So, the github helper can not be used here.
[Peter: mention the change to github]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ExtUtils::MakeMaker adds all the header files used by the perl as
dependencies to the generated Makefile. This means that the generated
Makefile will depend on the system's header files.
Usually this is not a problem, because when building the target package,
these header files will indeed be found in $(STAGING_DIR). However, some
distro's add an extra header file to the system's perl. This header is
also included in the generated Makefile, which makes the build fail
because it doesn't exist in $(STAGING_DIR).
As a work-around, explicitly create this header file in $(STAGING_DIR).
It doesn't hurt to create it even if the system perl doesn't need it.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2014-0591 (a crafted query against an NSEC3-signed zone can
crash BIND).
The 9.9.x series is the new ESV vesion, 9.6.x has been retired.
Also cleanup the initscript while at it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes
http://autobuild.buildroot.net/results/a8a/a8a8e39d57b14f1a59c8e6322b511c761442ee3c/http://autobuild.buildroot.net/results/227/2278a078af5cc2e9f36661ad11e70b7692481266/
Instead of patching the buildsystem just use the included option --disable-
dvbscan, therefore remove tvheadend-001-no-auto-download-dvbscans.patch
This should also point tvheadend to the right place for the dvb data according
to src/input/mpegts/scanfile.c:
#if ENABLE_DVBSCAN
path = "data/dvb-scan";
#else
path = "/usr/share/dvb";
#endif
and the resulting binary:
strings tvheadend | grep "dvb-scan\|share\/dvb"
/usr/share/dvb
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit significantly reduces the build time of host-gettext and
gettext, by using the capacity of gettext to handle build things in a
certain subdirectory:
- For the host variant of gettext, we only need the gettext-tools,
available in the directory of the same name in the gettext sources.
- For the target variant of gettext, we only need the gettext library
libintl, available in the gettext-runtime directory in the gettext
sources.
So by using appropriate values of GETTEXT_SUBDIR and
HOST_GETTEXT_SUBDIR, we only build what's necessary. Moreover, by
manually patching gettext-tools/Makefile.in and
gettext-runtime/Makefile.in, we make sure to not build and install
things like examples, documentation and so on.
In addition to this, these changes avoid the need to autoreconfigure
the gettext package, which was particularly long.
Thanks to these changes, the build time of gettext goes from 1 minutes
and 37 seconds to just 24 seconds, and the build of host-gettext goes
from 2 minutes and 18 seconds to 1 minute and 13 seconds.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit removes the BR2_PACKAGE_GETTEXT_TOOLS option, which could
be used to install gettext tools on the target. This is not needed,
because Buildroot is not designed to provide a full development
environment on the target, and gettext translation files should be
processed on the build machine, using the host gettext tools.
Remove this option will allow to optimize the build time of gettext on
the target, by only building the gettext runtime libraries.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Commit 9ff640ae30 ("minidlna: needs
gettext and host-gettext tools if locale is enabled") modified the
minidlna package to fix gettext related issues. As part of this patch,
a select of BR2_PACKAGE_GETTEXT_TOOLS was added, which according to
the commit title is used to have host-gettext tools installed.
However, this is not what this option is about: this option is about
having gettext tools installed on the target.
Since this is not what minidlna needs, and we anyway plan to remove
this BR2_PACKAGE_GETTEXT_TOOLS option, this commit removes this
incorrect select statement.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
Cc: Bernd Kuhls <berndkuhls@hotmail.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas:
- fix license version: the license is GPLv2+, not GPLv2
- make sure the ncurses backend is selected if none of the other
backends are selected.
- add dependency on libiconv of the curses and gtk2 backends, needed
in !locale configurations.]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Markos Chandras <Markos.Chandras@imgtec.com>
Reviewed-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
WIDECHARINCL is enabled by HASWIDECHAR, so removing its definition if
BR2_USE_WCHAR is not set is useless.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Add missing select of BR2_PACKAGE_LIBUSB, since
BR2_PACKAGE_LIBUSB_COMPAT depends on it
- Add missing thread dependency, since libusb requires threads.
- Add missing wide-char dependency. Without wide char support,
sispmctl doesn't build.
- Rewrap the Config.in help text, and remove trailing whitespaces.
- License is GPLv2+, not GPLv2.
- Remove --disable-dependency-tracking from <pkg>_CONF_OPT. That's a
global, standard, autoconf option, and there's no reason to pass it
at the per-package level.]
Signed-off-by: Phil Eichinger <phil@zankapfel.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit cf1c2eb19d.
xkbcommon is still needed for the clients. There's no point in disabling
the clients, or weston is unusable (as packaged in Buildroot.)
Fixes:
http://autobuild.buildroot.org/results/4e9/4e996c65f5b33d4518b0596d9c7076083d491a52/
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
linux-zigbee is a mix of utility tools that implements a 802.15.4 stack
along with a usefull library for any program that would need to use this
stack.
Note that the name is mislead, for licensing reason, this does *NOT*
implement the ZigBee protocol.
[Thomas:
- add dependency on threads, propagated from libnl
- improve the Config.in description by borrowing more text from the
upstream website
- fix the prompt of sub-options to be more consistent, and add help
texts where appropriate
- fix indentation of the BR2_PACKAGE_LINUX_ZIGBEE_TESTS option help
text
- add missing dependencies on host-pkgconf, host-flex and host-bison
- add missing SoB line in the patch disabling test-serial. Maxime is
a well-known contributor, so I assumed we had his SoB.
- fix indentation of <pkg>_CONF_OPT.
- remove <pkg>_INSTALL_STAGING = YES since the package does not
install any library, and the two headers it installs are available
through the toolchain kernel headers.
- add comment to explain <pkg>_AUTORECONF = YES.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's currently in a non-working state since it requires a couple of
extensions that don't build at the moment (they try to execute tests in
configure) and also requires a target compiler.
So remove it to avoid false expectations and reclaim target space back
of about 1.5 MiB.
[Thomas: slightly reword comments.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The package is host-only, so there's no point in specifying
INSTALL_STAGING = YES.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The package is host-only, so there's no point in specifying
INSTALL_STAGING = YES.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gcc graphite optimisations such as loop-interchange, blocking
and loop-flattening, also known as graphite are an optional feature of
gcc that is very well supported since about gcc version 4.5.
This patch adds support for graphite for the toolchain as an optional
flag for versions 4.8 onwards as an optional flag, that is disabled by
default.
Signed-off-by: Steve Thomas <scjthm@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CLooG is a free software and library to generate code for scanning
Z-polyhedra.
cloog is needed for the optional graphite optimisations that are
supported by gcc since version 4.5. Therefore this package is required
for the toolchain to support graphite.
Graphite optimisations primarily involve loop blocking flattening and
interchage so are probably of mimimal use in an embedded system where
small sizes are favoured.
cloog depends on isl.
[Thomas:
- Add patch to add missing CMake related files to the release
tarball, preventing the build from succeeding.
- bump to 0.18.2
- disable libtool patch, which doesn't apply]
Signed-off-by: Steve Thomas <scjthm@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
isl is a library for manipulating sets and relations of integer points
bounded by linear constraints.
isl is needed for the optional graphite optimisations that are supported
by gcc since version 4.5. Therefore this package is required for the
toolchain to support graphite.
Graphite optimisations primarily involve loop blocking flattening and
interchage so are probably of mimimal use in an embedded system where
small sizes are favoured.
[Thomas:
- bump to 0.12.2 (cannot use 0.13, incompatible with cloog 0.18.2,
comment added about this)
- use .bz2 tarball
- disable libtool patch, which doesn't apply]
Signed-off-by: Steve Thomas <scjthm@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add two uClibc 0.9.33.2 patches which fix issues relating to high signal
number handling on MIPS.
The first patch (0056) fixes _NSIG (and as a result __SIGRTMAX) to match
glibc. This fixes GDB on MIPS with uClibc, which cannot handle
__SIGRTMAX == 128 and emits the error:
GDB bug: target.c (gdb_signal_from_host): unrecognized real-time signal
This patch is from uClibc commit 2da958760f79 (MIPS: set _NSIG to
128, not 129. This matches glibc.) and applies without conflicts.
The second patch (0057) fixes the wait status macros to correctly
interpret status 0x007f on MIPS (other arches don't have signal 127).
This patch is from uClibc commit 4a96b9486871 (bits/waitstatus.h:
correctly interpret status 0x007f on MIPS) and applies without
conflicts.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add uClibc 0.9.33.2 patch to fix arch specific eventfd definitions,
particularly EFD_NONBLOCK. The definition in sys/eventfd.h was 04000
(0x800), however MIPS uses 0200 (0x80). This resulted in QEMU built for
MIPS hanging at various points until input is received due to a blocking
poll of stdin.
The patch is a backport of uClibc commit fd355bc1dbcb (eventfd.h: Use
new "bits/" scheme for arch-specific flags). The only conflict was minor
in Makefile.in.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using only -I${includedir} in common practice.
Settings only -I${includedir}/GLES2 breaks Qt5's CMake files,
because at configure time CMake only searchs the paths reported
by pkg-config, and not even /usr/include is used as default.
Even though pkg-config strips out standard include path, that's not
the case with pkgconf (which we are using) in cross-compilation,
which correctly reports the /usr/include dir prefixed with the
sysroot.
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Kümmel <syntheticpp@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using only -I${includedir} in common practice.
Settings only -I${includedir}/GLES2 breaks Qt5's CMake files,
because at configure time CMake only searchs the paths reported
by pkg-config, and not even /usr/include is used as default.
Even though pkg-config strips out standard include path, that's not
the case with pkgconf (which we are using) in cross-compilation,
which correctly reports the /usr/include dir prefixed with the
sysroot.
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Kümmel <syntheticpp@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we just use what a package declares as its dependencies.
But some packages may declare the same depdency more than once. For
example, php has two options to add SQL support: 'mysql' or 'mysqli',
which are not exclusive. So, php.mk has mysql twice as a dependency.
Although that does not cause any grievance for make, we end up generating
dependency graphs where this duplicate dependency is visible.
Add an intermediary variable which contains the $(sort)-ed list of the
dependencies, thus eliminating any duplicates.
This has the side effect of also sorting the list, which is probably
good for reproducibility anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The first patch "use-pkg-config-instead-of-python-config" has been applied
upstream.
The flag _GNU_SOURCE is now always defined in Makefile, so it can be removed
from trace-cmd.mk
CPPFLAGS are appended to CFLAGS and are used to add extra flags, but the flag
_LARGEFILE64_SOURCE in TARGET_CPPFLAGS is already defined in source files,
which causes a build error. As for CFLAGS, we fix this by filtering out our
definition of _LARGEFILE64_SOURCE from the CPPFLAGS before passing them to the
trace-cmd Makefile.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
faifa is a library and a cli used to manage PLC hardware that use
Intellon chipset. Almost everybody use theses chips nowadays.
[Thomas: license is GPLv2+, not GPLv2. Fix indentation. Add dependency
on host-autoconf and a comment to explain what's going on. Fix
indentation of target/staging installation commands. Mark the package
as not available for static library builds as it always build a shared
library. Rewrap Config.in help text.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rename the prompt for mesa3d so that it matches what we usually do
for prompts of packages: just name the package in lower case.
This will help generate nicer tables in the generated packages list,
both in existing tables, and in the upcoming table of virtual packages.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the virtual package jpeg is a special virtual package,
as it offers a choice for its implementation, rather than letting the
user enable them manually.
In so doing, it defines its _HAS option as a 'def_bool y' rather than
letting each implementation 'select' it.
Since we are going to generate a list of virtual packages and their
providers, this defeats the heuristic used to find providers.
Coming with an alternate heuristic that also matches the jpeg
package is quite complex, so better and easier to make it look more
like any other virtual package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the virtual package cryptodev is a special virtual package,
as it offers a choice for its implementation, rather than letting the
user enable them manually.
In so doing, it defines its _HAS option as a 'def_bool y' rather than
letting each implementation 'select' it.
Since we are going to generate a list of virtual packages and their
providers, this defeats the heuristic used to find providers.
Coming with an alternate heuristic that also matches the cryptodev
package is quite complex, so better and easier to make it look more
like any other virtual package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kids nowaday seem to prefer a left-to-right drawing rather than the
more conventional and historical top-down drawing.
Rather than multiply the number of environment variables, just add
a single one where the user can pass arbitrary dot options, such as:
make BR2_GRAPH_DOT_OPTS=-Grankdir=LR graph-depends
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A new configuration option is available in systemd menu, to enable
support for SMACK.
For this feature to properly work, systemd requires attr (build
dependency, also used for other features) and smack (runtime dependency).
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is to keep patch application order correct and to comply with
documentation.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using "poweroff" instead of "halt" has the side advantage of flashing
the "ACT" LED 10 times (@ ~1Hz) to instruct the user when it is safe
to unplug the power supply.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps systemd to v213.
This new version introduces systemd-timesyncd, a SNTP daemon. This
feature can be enabled if systemd-networkd is selected via the
configuration menu. It is a simple alternative to ntpd, useful for
machines without a RTC.
The patch for reverting the use of --relative option when calling `ln`
has been refreshed, as the configure script now checks if `ln` supports
the --relative option and fails if it does not.
Another patch for the proper deactivation of gtk-doc has been added.
All these steps now require an autoreconf.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The git repository has been moved to http://www.kernel.org/pub/ which
allows to use $(BR2_KERNEL_MIRROR)
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change reverts the commit 5e3b1f31b3
because rpi-userland is correctly built whatever the value of the
BUILD_SHARED_LIBS CMake flags.
The cset 5e3b1f31b3 originally intends to
fix linkage/runtime failure in xbmc package because of missing flags in
xbmc LIBS env. var. This has been fixed in the previous patch.
So, for rpi-userland package, BUILD_SHARED_LIBS does no longer need to
be forced to OFF, and can safely be driven by the CMake infrastructure.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Maxime Hadjinlian" <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change adds a patch fix the missing install rules for libvcilcs.
This is a pre-requisite to be able to build the shared libraries of the
rpi-userland package, and most importantly avoid linkage failure (at
link-time and/or runtime) in others libraries that link with it.
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When rpi-userland libraries are built as shared-objects, not all needed
libraries are passed in the LD_FLAGS, leading to failure at linkage.
To avoid this issue, set the LIBS variable content in accordance with the
INCLUDES variable value.
The commit 5e3b1f31b3 currently works
around this issue by forcing rpi-userland to be statically linked,
whereas it is actually a LIBS flags problem in xbmc package.
A follow-up patch fixes rpi-userland package.
Reported-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Maxime Hadjinlian" <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When rpi-userland libraries are built as shared-objects, not all needed
libraries are passed in the LD_FLAGS, leading to failure at linkage.
To avoid this issue, set the LIBS variable content in accordance with
INCLUDES variable value.
This is needed because libcec does not use pkg-config to look for the
ldflags needed for -lbcm_host, even though bcm_host provides a .pc
file (even a correct one!)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Tested-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libcec support in xbmc compiles without udev being linked to libcec,
but it is useless because xbmc uses libcec´s udev support for scanning
connected CEC devices since:
59171c7a03
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes error during xbmc configure:
yasm not found, use --disable-yasm for a crippled build
If you think configure made a mistake, make sure you are using the latest
version from Git. If the latest version fails, report the problem to the
ffmpeg-user@ffmpeg.org mailing list or IRC #ffmpeg on irc.freenode.net.
Include the log file "config.log" produced by configure as this will help
solving the problem.
configure: error: Submodule lib/ffmpeg failed to configure
This will be needed for 13.0 Gotham.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
checking for nasm... no
configure: error: Could not find a required program. Please see the README for your platform.
This will be needed for 13.0 Gotham.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
AUTOPOINT=/bin/true does not work anymore since
42017cba7a
config.status: error: cannot find input file: `Makefile.in'
configure: error: Submodule lib/cpluff failed to configure
This will be needed for 13.0 Gotham.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Maxime Hadjinlian" <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ARC-specific Makefile has been ignoring DESTDIR when doing target "install".
This has been causing build failure for native binutils, since it was trying
to install into the host's "/usr". This commit adds a patch that teaches
Makefile to honor DESTDIR. This patch should be removed after ARC Binutils
will be bumped to next release.
This fixes:
http://autobuild.buildroot.net/results/68ee094509db3e8fbedf9bab5745ff68cdfe0a84/
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Create an avahi specific user/group and use it instead of the global
'default' one, so it can be removed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2014-0224, CVE-2014-0221, CVE-2014-0195, CVE-2014-0198 among others.
See https://www.openssl.org/news/secadv_20140605.txt for details.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop upstream patch.
CONFIG_IEEE80211W is now enabled by default.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patches are now upstream.
Enable epoll support since any modern kernel/toolchain supports it.
Interworking requires Hotspot functionality which we didn't enable
before so introduce a new option for them.
While at it group and sort the options in a more lean and friendly way.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gst1-libav produces particularly large binaries, and the relocations
needed for it do not fit in the possible relocation mechanisms
available on avr32. Let's just disable it.
Fixes:
http://autobuild.buildroot.net/results/15e/15e31d92848b53f001bd6acde71409af3091215c/
[Peter: drop tvheadend hunk]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We support a busybox-menuconfig target so that the BusyBox
configuration can be adjusted as needed. However, depending
on what other packages are enabled, re-installing BusyBox
symlinks that duplicate "real" apps after the configuration
change can result in bad behaviors:
* At best, the BusyBox applet will be used after the
install, versus the desired "real" app.
* At worst, the built rootfs can become unbootable.
The BusyBox install.sh has some capability to avoid this issue
by means of a --noclobber option. By default, this option is
disabled. When enabled, the install.sh will not overwrite a
target file with a symlink or hardlink, be it an actual file
or a previously installed BusyBox link.
The install.sh's argument processing is somewhat broken, so this
patch simply changes the default value of the noclobber option
to on, rather than add --noclobber to the install.sh invocation.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The correct capitalisation pattern is "GitHub"; fix manual and makefile
commentary.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#7166
hostapd crashes with segfault when using RT5370. This is because the driver
reports Beacon RX prior to hostapd having completed the AP mode setup.
This upstream commit fixes it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop --disable-tls since it's not needed.
Add --disable-rpath to avoid unnecessary pollution.
e4defrag now needs an (e)glibc or musl toolchain because of
sync_file_range()
See e2fsprogs commit 58229aaf85d435469e901c974f31ead6d9124166
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Closes#7160
Since f46f81de13 (Don't build host-xz needlessly), host-xz is no longer
unconditionally built when xz fs compression is requested, so don't
explicitly refer to it.
Instead, rely on our check-host-xzcat logic to ensure xz is available and
set the path to ensure our host variant gets picked up if not available on
the build machine.
While we're at it, get rid of the now unused XZ variable.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Relese notes for 0.9.9 release are avaialble here:
http://oprofile.sourceforge.net/release-notes/oprofile-0.9.9
This release adds support for ARC architecture.
Also introduces new "ocount" program for collection of raw event counts.
With release of 0.9.9 we may drop back-ported patches:
oprofile-002-no-query-modules.patch - liblegacy was removed since 2.4 kernels
are no longer supported
fcb818623b/
oprofile-003-oprofile-ppc32-build-fix.patch
fa889ea74b/
oprofile-004-fix-ppc64-specific-libpfm-usage.patch
79a183ed0d/
oprofile-005-fix-up-configure-to-handle-architectures-that-do-not.patch
ca6d916a6f/
But in 0.9.9 was introduced build breakage which was fixed later so adding
another back-ported patch
oprofile-002-Fix-compile-error-on-ppc-uClibc-platform-AT_BASE_PLA.patch
08241f1b2c/
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Simon Dawson <spdawson@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Kim De Mey <kim.demey@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch has been applied in the 6.8.9-2 version.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2014-0178 (Malformed FSCTL_SRV_ENUMERATE_SNAPSHOTS response)
and CVE-2014-0239 (dns: Don't reply to replies).
Patches 0001 and 0002 are now part of the 4.1.x release branch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The default uClibc version for xtensa is broken when LARGEFILE is disabled.
Add a patch to fix this.
Reported-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit c31d5bfdec (uclibc: arc: bump to arc-4.8-R3 release) uClibc
version f37101d94284 is no longer used for ARC. Remove a version specific
patch.
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Provide a fallback definition for KEY_MICMUTE (which was added in 3.1) and
fix the fallback definition for KEY_LIGHTS_TOGGLE (which was added in 3.10).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
procps is getting replaced by procps-ng, and there are
new versions available!
procps-ng is now an autotools package, so get rid of our
custom build/install rules.
Remove most patches, except for one that still half-applies,
so update and rename it.
procps is dead, long live procps-ng!
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some drivers (like ti-gfx) need fbset and we can't select it when we
use BusyBox because it is provided by BusyBox and as a package.
Signed-off-by: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Spenser Gilliland" <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is possible to build weston without libxkbcommon, for example
if using an input method that is not an hardware keyboard (e.g. a
virtual keyboard, or none at all.)
Make it optional.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to the recently -released 1.5.0.
Remove existing patches, they are no longer needed:
- weston-0000-compositor-rpi-fix-input-initialization.patch was a
back-port of an upstream fix, so no longer needed,
- weston-0003-dont-build-tests.patch no longer applies due to a
complete rewrite of Makefile.am, but it seems tests now build fine
even without EGL support: there is code in the Makefile.am to
explicitly handle that case
Add a new patch from upstream to avoid a use-after-free situation.
So, it's no longer needed to autoreconf.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
... and switch to using .tar.xz as that's all upstream is providing now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lotta fixes all over the tree.
Still no new release... :-/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 990a46fdec (glibc: move version handling to Config.in) we use
Config.in version strings. Remove glibc.mk duplicate.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
New scan tables, and updates to existing ones.
Update upstream URL at the same time.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A few adjustments here and there, plus re-definition
of the Crimea timezone.
New definition for the moment the Big-Bang occured, too. :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We already compile the zoneinfo once for the host, so there is
no need to recompile it for the target, we can just re-use the
host files.
This has no impact on tz (the uClibc counterpart of tzdata), since
it already made use of the host files anyway.
This means we no longer need to extract the target variant of
tzdata, too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The correct capitalised form appears to be "BusyBox" rather than "Busybox";
fix all references to the latter form. (Most such references occur in the
manual and in commentary in package makefiles.)
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: drop redundant ipv6 handling, whitespace issues]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Our patch is still valid, but it now builds fine with // builds
(tested many times with up to 128 // jobs, without failure.)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This installs firmware files for the FullMAC series of Broadcom
WiFi devices.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This bump brings in a new version of the iwlwifi firmware.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yet another bump for the Raspberry Pi firmware:
- HDMI: EDID override; HDCP fix; add command to control power to HDMI phy;
fixes to mode selection
- GPU: enable use of HW cursor; fix for GLES FFT compliance; fix scaling;
remove arbitrary restrictions on output sizes
- video-decode: better handle corrupted h264 streams, better allocate memory
- misc: choose composite video when HDMI is not plugged
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using a trick taken from gentoo enable parallel build when building for
the target to reduce the build time for my test case from about 54s to
32s on a dual-core laptop.
[Peter: add comment explaining why]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This flag is already correctly set by the cmake-package infrastructure.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This flag is already correctly set by the cmake-package infrastructure.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This flag is already correctly set by the cmake-package infrastructure.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This flag is already correctly set by the cmake-package infrastructure.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This CMake flag is usually used to adjust compiler flags (like: -Ox, -g,
etc).
So, it makes sense for Buildroot to globally drive this CMake flags in
the cmake-package infrastructure.
However, if a package prefer overriding this default setting, it still
can via the <PKG>_CONF_OPT variable.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This CMake flag is used to enable tests. It may not disable the test
programs from being built, but it controls the test execution.
Since we don't care about building the tests (and usually disable them
when possible), make sure Buildroot won't try to run them.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch updates the generated toolchainfile.cmake to use ccache.
When toolchainfile.cmake is used inside Buildroot, using ccache during
the build is driven by a CMake knob: USE_CCACHE, automatically set by
the cmake-package infrastructure and reflecting the BR2_CCACHE value.
Since this toolchainefile.cmake file can be used outside Buildroot, and
this file also set a couple of things (among these: the sysroot cflag,
some pkg-config environment variables), it is important to set the
compiler variables as well to keep the consistency of the
cross-compilation configuration.
So, when it is used outside Buildroot, using ccache for the build is
driven by the ccache program availability.
Note that using ccache for the build is achieved by setting the *_ARG1
CMake variables to let CMake use ccache without failing in detecting
the compiler.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch allows sharing or moving the toolchains.
This is a step toward making the toolchain/sdk relocatable.
Closes#6818
[Peter: reword comment as suggested by Thomas]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Uwe Strempel <u.strempel@googlemail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch introduces a toolchainfile.cmake.in template which is filled
by Buildroot.
Using a toolchainfile.cmake.in template file allows to avoid overloading
quoting and/or escaping and it becomes much more similar to the
resulting file.
This patch also cleans up the quoting style.
[Peter: drop stdin redirect as suggested by Thomas]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc 4.7.x is going to be retired soon, and now that gcc 4.9.0 is out,
it's time for Buildroot to switch to gcc 4.8.x as the default gcc
compiler version.
See https://gcc.gnu.org/ml/gcc/2014-05/msg00324.html for details about
gcc 4.7.x life cycle.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As suggested by Gustavo, this patch bumps mpg123 to 1.20.0, and
therefore superseds the patch initially provided by Sven Neumann. In
1.20.0, there is a new CPU type arm_fpu, which will compile code for
both VFP and NEON, and choose at runtime which one to use.
Similarly for AArch64, the option --with-cpu=aarch64 will compile both
the NEON and generic decoders, and select at runtime which one to use.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add glibc 2.19-svnr25243 and a choice menu to select between different
eglibc versions.
Blacklist it for PowerPC SPE since it doesn't even build.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These are already in toolchain/toolchain-buildroot/Config.in and since
package/glibc/Config.in is filtered by BR2_TOOLCHAIN_USES_GLIBC there's
no need to duplicate this.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
elf2flt is specifically for cases where an MMU is not available.
There is no point in building elf2flt when using an MMU.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reformat help text to fit in menuconfig, slightly tweak wording, strip
trailing spaces and clarify that wpa_supplicant is only a runtime
dependency.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- add new configuration option '--enable-wispr' (disabled by default)
- move gnutls dependency to "wispr" config option
[Peter: drop gnutls ref for wchar, tweak help text, simplify .mk]
Signed-off-by: Heiko Abraham <abrahamh@web.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
