Commit Graph

18282 Commits

Author SHA1 Message Date
Yann E. MORIN
6a40596ed0 configs: bump kernel used for the RPi
The rpi-3.12.y branch has now been merged with the 3.12.20 upstream,
and contains some fixes for FIQ, v4l2, i2c, USB, and 1-wire GPIOs.

Bump kernel headers used for the toolchain at the same time.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 23:12:34 +02:00
Yann E. MORIN
ecfd6b9c30 package/rpi-firmware: bump
Yet another bump for the Raspberry Pi firmware:
  - HDMI: EDID override; HDCP fix; add command to control power to HDMI phy;
        fixes to mode selection
  - GPU: enable use of HW cursor; fix for GLES FFT compliance; fix scaling;
        remove arbitrary restrictions on output sizes
  - video-decode: better handle corrupted h264 streams, better allocate memory
  - misc: choose composite video when HDMI is not plugged

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 23:12:16 +02:00
Gustavo Zacarias
8398016e94 ncurses: enable parallel build
Using a trick taken from gentoo enable parallel build when building for
the target to reduce the build time for my test case from about 54s to
32s on a dual-core laptop.

[Peter: add comment explaining why]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 22:50:30 +02:00
Samuel Martin
3663bc4ff2 qhull: do not override CMAKE_BUILD_TYPE
This flag is already correctly set by the cmake-package infrastructure.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 22:21:05 +02:00
Samuel Martin
844209c8d6 flann: do not override CMAKE_BUILD_TYPE
This flag is already correctly set by the cmake-package infrastructure.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 22:20:29 +02:00
Samuel Martin
2c2e3ef173 opencv: do not override CMAKE_BUILD_TYPE
This flag is already correctly set by the cmake-package infrastructure.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 22:20:14 +02:00
Samuel Martin
bccca5a0e2 openpowerlink: do not override CMAKE_BUILD_TYPE
This flag is already correctly set by the cmake-package infrastructure.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 22:19:43 +02:00
Samuel Martin
642e44e263 pkg-cmake.mk: globally drive the CMAKE_BUILD_TYPE flag using BR2_ENABLE_DEBUG
This CMake flag is usually used to adjust compiler flags (like: -Ox, -g,
etc).

So, it makes sense for Buildroot to globally drive this CMake flags in
the cmake-package infrastructure.

However, if a package prefer overriding this default setting, it still
can via the <PKG>_CONF_OPT variable.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 22:19:36 +02:00
Samuel Martin
257a82031e pkg-cmake.mk: globally disable BUILD_TESTING flag
This CMake flag is used to enable tests. It may not disable the test
programs from being built, but it controls the test execution.

Since we don't care about building the tests (and usually disable them
when possible), make sure Buildroot won't try to run them.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 22:18:25 +02:00
Samuel Martin
c8f2d248f6 pkg-cmake.mk: enable ccache for cmake packages
This patch updates the generated toolchainfile.cmake to use ccache.

When toolchainfile.cmake is used inside Buildroot, using ccache during
the build is driven by a CMake knob: USE_CCACHE, automatically set by
the cmake-package infrastructure and reflecting the BR2_CCACHE value.

Since this toolchainefile.cmake file can be used outside Buildroot, and
this file also set a couple of things (among these: the sysroot cflag,
some pkg-config environment variables), it is important to set the
compiler variables as well to keep the consistency of the
cross-compilation configuration.
So, when it is used outside Buildroot, using ccache for the build is
driven by the ccache program availability.

Note that using ccache for the build is achieved by setting the *_ARG1
CMake variables to let CMake use ccache without failing in detecting
the compiler.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 22:16:24 +02:00
Samuel Martin
9033d90118 pkg-cmake.mk: do not hardcode absolute path in toolchainfile.cmake
The patch allows sharing or moving the toolchains.

This is a step toward making the toolchain/sdk relocatable.

Closes #6818

[Peter: reword comment as suggested by Thomas]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Uwe Strempel <u.strempel@googlemail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 22:15:43 +02:00
Samuel Martin
85fea5d953 pkg-cmake.mk: refactor the toolchainfile.cmake generation
This patch introduces a toolchainfile.cmake.in template which is filled
by Buildroot.

Using a toolchainfile.cmake.in template file allows to avoid overloading
quoting and/or escaping and it becomes much more similar to the
resulting file.

This patch also cleans up the quoting style.

[Peter: drop stdin redirect as suggested by Thomas]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 22:11:38 +02:00
Thomas Petazzoni
3d997bf7bc gcc: switch to gcc 4.8.x as the default compiler version
gcc 4.7.x is going to be retired soon, and now that gcc 4.9.0 is out,
it's time for Buildroot to switch to gcc 4.8.x as the default gcc
compiler version.

See https://gcc.gnu.org/ml/gcc/2014-05/msg00324.html for details about
gcc 4.7.x life cycle.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 21:51:17 +02:00
Bernd Kuhls
41b2e1a74c package/php: Bump version to 5.5.13
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 21:51:17 +02:00
Thomas Petazzoni
1cf2c6ea93 mpg123: bump to 1.20.0, providing better optimizations for ARM and AArch64
As suggested by Gustavo, this patch bumps mpg123 to 1.20.0, and
therefore superseds the patch initially provided by Sven Neumann. In
1.20.0, there is a new CPU type arm_fpu, which will compile code for
both VFP and NEON, and choose at runtime which one to use.

Similarly for AArch64, the option --with-cpu=aarch64 will compile both
the NEON and generic decoders, and select at runtime which one to use.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 21:51:17 +02:00
Gustavo Zacarias
2bdc60c6b7 mysql: disable for AVR32
The compiler can't even build it, fixes:
http://autobuild.buildroot.net/results/b5c/b5c3893accc777d717e1d70283437aa626f0aa2d/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 21:51:17 +02:00
Peter Korsgaard
990a46fdec glibc: move version handling to Config.in
Like we do elsewhere. No functional change, but nicer and easier to keep in
sync.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 21:51:09 +02:00
Gustavo Zacarias
fb48cdee66 glibc: add eglibc 2.19-svnr25243 and choice menu
Add glibc 2.19-svnr25243 and a choice menu to select between different
eglibc versions.
Blacklist it for PowerPC SPE since it doesn't even build.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 21:00:19 +02:00
Gustavo Zacarias
94df3e6d1b glibc: drop redundant arch depends
These are already in toolchain/toolchain-buildroot/Config.in and since
package/glibc/Config.in is filtered by BR2_TOOLCHAIN_USES_GLIBC there's
no need to duplicate this.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 20:58:29 +02:00
Baruch Siach
c4ecb34fe4 xapp_xedit: needs MMU
Fixes:
http://autobuild.buildroot.net/results/6b9/6b941b5992c73acd19e8077dbe6cb9fc65e5eba1/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 20:56:12 +02:00
Gustavo Zacarias
014076da4c linux: bump to version 3.14.5
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 20:55:47 +02:00
Gustavo Zacarias
c679c23dec linux-headers: bump 3.{10,14}.x series
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 20:55:44 +02:00
Thomas Petazzoni
3d140790eb libdvdread: needs dynamic library support
Fixes:

  http://autobuild.buildroot.org/results/0ed/0ed3152a166a69d65a226e3cef755ed370cc245b/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 20:54:08 +02:00
Waldemar Brodkorb
f7a257365e reenable microblaze little endian for internal musl toolchain
The assumption that musl libc does not support microblaze
little endian mode is wrong. See
http://git.musl-libc.org/cgit/musl/tree/configure line
number 447-448.

Tested with qemu. Just revert previous commit as suggested by
Thomas Petazzoni.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 17:28:57 +02:00
Simon Dawson
b3b4369848 manual: fix spelling mistakes
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 17:28:05 +02:00
Peter Korsgaard
27a5414804 Merge branch 'next'
Conflicts:
	package/gdb/Config.in.host

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 09:58:54 +02:00
Peter Korsgaard
f6162290fb Kickoff 2014.08 cycle
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 09:49:55 +02:00
Peter Korsgaard
d27170a6f7 docs/news.html: add 2014.05 announcement link
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 09:49:24 +02:00
Peter Korsgaard
f287d625b2 Update for 2014.05
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-31 09:52:49 +02:00
Heiko Abraham
fc90fa9417 Improve tar check if bsdtar is installed
If bsdtar is installed, fix script error for tar version detection.

bsdtar does not provide all expected command line (long) options
like "--hard-dereference". To ensure compatibility, mark version
of tar as 'invalid' and trigger build of 'host-tar'.

[Peter; slightly reworded commit text]
Signed-off-by: Heiko Abraham <abrahamh@web.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-31 09:39:40 +02:00
Peter Korsgaard
5a3899065e manual/make-tips.txt: busybox doesn't have a savedefconfig target
So don't mention it here.

Reported-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-31 09:33:10 +02:00
Peter Korsgaard
ad6db5b747 qt5webkit: needs host-flex
Fixes http://autobuild.buildroot.net/results/dbe/dbe4e8f7b7ddd8ab3fdc1a6f41d775b3c8132160/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-31 09:24:57 +02:00
Gustavo Zacarias
5777e3ffd9 glibc: doesn't build for PowerPC SPE
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-30 23:56:37 +02:00
Yann E. MORIN
36017b3d3a package/elf2flt: hide when an MMU is used
elf2flt is specifically for cases where an MMU is not available.
There is no point in building elf2flt when using an MMU.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-30 23:29:02 +02:00
Thomas Petazzoni
1a55542e98 toolchain-buildroot: only allow the selection of Musl for Microblaze BE
The Musl C library only supports Microblaze BE, not Microblaze LE, so
this commit adjusts the dependencies of the toolchain-buildroot
package to not allow the selection of Musl on Microblaze LE.

Cc: William Welch <bvwelch@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-30 23:27:58 +02:00
Thomas Petazzoni
77ef6a3a12 toolchain-external: restrict Musl external toolchain to Microblaze BE
As reported by William Welch <bvwelch@gmail.com>, the Musl external
toolchain provided by the musl-cross project is only Microblaze
big-endian. In fact, Musl seems to only support the big endian variant
of the Microblaze architecture, with the microblaze-* tuple.

This commit makes sure the Musl pre-built external toolchain provided
by musl-cross can only be selected for a big-endian Microblaze
configuration.

Reported-by: William Welch <bvwelch@gmail.com>
Cc: William Welch <bvwelch@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-30 23:27:16 +02:00
Peter Korsgaard
019188d2ee connman: cleanup Config.in
Reformat help text to fit in menuconfig, slightly tweak wording, strip
trailing spaces and clarify that wpa_supplicant is only a runtime
dependency.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-30 23:26:03 +02:00
Heiko Abraham
8b8174e714 package/connman : enable build without gnutls dependency
- add new configuration option '--enable-wispr' (disabled by default)
- move gnutls dependency to "wispr" config option

[Peter: drop gnutls ref for wchar, tweak help text, simplify .mk]
Signed-off-by: Heiko Abraham <abrahamh@web.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-30 23:12:05 +02:00
Gustavo Zacarias
5c3f0ce05d gnutls: security bump to version 3.2.15
Fixes GNUTLS-SA-2014-3 (CVE-2014-3466).

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-30 22:48:40 +02:00
Peter Seiderer
8785a4723d fontconfig: bump to version 2.11.1
Fixes misinstallation of xfont_font-bh-ttf-1.0.3/42-luxi-mono.conf to
'target@baseconfigdir@/conf.avail/42-luxi-mono.conf'
instead of proper place in the target directory (because of buggy
fontconfig.pc file).

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-30 22:47:08 +02:00
Sebastien Roy
70c7fbf0ae manual: Fix BR2_GLOBAL_PATCH_DIR example
As discussed on irc, there is a missing part in the BR2_GLOBAL_PATCH_DIR
    example compared to the ASCII figure under customize-packages section.

Signed-off-by: Sebastien Roy <sebastien.roy@savoirfairelinux.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-29 23:21:15 +02:00
Will Wagner
05fb9bd165 qt5base: stop qt stripping installed libraries
By default the 'make install' step for qt5base will strip all the binaries
and libraries when they are installed to staging. This hinders debugging
as the libraries in staging dir have been stripped and is unnecessary
as buildroot will strip all files on the target

Signed-off-by: Will Wagner <will_wagner@carallon.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-29 23:19:35 +02:00
Baruch Siach
1aaa14d84f thrift: disable for ARC
thrift uses the __sync_fetch_and_add() atomic primitive that is not available
for ARC.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-29 23:18:59 +02:00
Baruch Siach
3ba91e346f libfribidi: depend on host-pkgconf
libfribidi needs macros from pkgconf to generate its configure script. Since
commit 5693f236a2 (libfribidi: bump version) we AUTORECONF, so host-pkgconf
is also needed.

Fixes:
http://autobuild.buildroot.net/results/5d7/5d76a8333fb05e903460ad51dc0737c18431d033/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-29 23:18:10 +02:00
Baruch Siach
bf4586d7ce sysklogd: needs MMU
Fixes:
http://autobuild.buildroot.net/results/bf1/bf1a6e1d4798c5abea4ff5114279329d6d90548f/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-29 23:17:44 +02:00
Peter Korsgaard
cb9aac7539 u-boot: use spl/u-boot-spl.bin as default spl file
Ever since u-boot introduced the generic spl support in u-boot 2012.10, the
default spl output file has been spl/u-boot-spl.bin and not u-boot-spl.bin,
so use that as a more sane default value.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-29 23:16:32 +02:00
Alexey Brodkin
34c2afeb75 libffi: back-port support for ARC
Support for ARC CPUs was added in libffi after 3.0.13 vesion was cut and up
until now no new release has been done. So to enale libffi on ARC we need this
set of patches.

These are corrsponding commits in libffi:
 * b082e15091961373c03d10ed0251f619ebb6ed76 - Add ARC support
 * 0f8690a84c874ec09a090c8c6adfb93c594acac6 - Rebuild for ARC additions
 * d918d47809c174d62283306b282749f8db93661f - arc: Fix build error

The first patch was modified a bit (cut changelog part) to accomodate
changes not related to ARC between 3.0.14 and changes in question.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Misca Jonker <mjonker@synopsys.com>

Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-29 22:15:00 +02:00
Thomas De Schampheleire
baa41098aa manual: remove contributor list and add copyright
As discussed on the mailing list [1], remove the limited explicit list of
contributors in favor of the general mention of 'The Buildroot developers'.
Add a copyright statement.
Move the generation info to the front.

[1] http://lists.busybox.net/pipermail/buildroot/2014-May/097589.html

[Peter: remove trailing +, minor rewording]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-29 00:03:49 +02:00
Yann E. MORIN
413174e6fb package/exim: security bump
Bump exim to get an urgent security fix.

We should not be impacted, since we're not building with DMARC (where
the flaw is), but better safe than sorry.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-28 23:28:57 +02:00
Thomas De Schampheleire
e5512dfc49 fs/tar: use qstrip to clean up build output
When using the tar filesystem method, the build output shows at the end:

echo " tar -c""f <br>/output/images/rootfs.tar -C <br>/output/target ." >>
                                    <br>/output/build/_fakeroot.fs

The inner set of quotes can be easily removed by properly stripping the tar
options (coming from the buildroot configuration).

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-28 21:19:58 +02:00