Add a gentoo patch to fix the wicked slsh link line that ended in the
bizarre prefix/exec_prefix/DESTDIR trickery.
Also fixes:
http://autobuild.buildroot.net/results/c3f/c3fb5337a4bdf87baead64106427c4929241c58d/
Also be explicit with enabling/disabling libpng, pcre, readline and zlib
support since they get picked up from the host if header files are
around because of the problem known as "absolute paths" when trying to
autodetect.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we use Google+ to share our news, this add a logo on the menu bar,
which links to the Buildroot profile.
[Peter: change link to Buildroot account]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building o32 ELF files for MIPS64 is an exotic configuration that nobody
should be using. If o32 is required, then is better if it's built for
MIPS 32-bit cores so only 32-bit instructions will be used leading to a
more efficient o32 usage.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The S59snmpd script has a strange mix of tabs and spaces. Replace
tabs with spaces, and also remove unnecessary line continuations
from the start-stop-daemon lines, as none of them go beyond 80
columns.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ncurses check need to be disabled if ncurses package is not
selected.
If we don't do that, host's ncurses5-config may be used by
configure script.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The installation location of the slang library
does not take into account the DESTDIR directory.
So SLANG_INST_LIB is initialized with -L/usr/lib/
and slang may be linked with host's libdl.so (if any)
Therefore, we have to pass correct installation paths.
Fixes:
http://autobuild.buildroot.net/results/df4/df435d9cebbdc84b3581ba258b618123570dde8b/
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A few people have already asked why XBMC depends on host-sdl_image and
host-sdl.
Since this is not obvious, this patch add a comments explaining why it's
needed.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host variant of sdl inherited the dependencies and conf opt from
sdl which could lead to some trouble.
For example:
If you were to build host-sdl and had alsa-lib enabled in your
packages list, it would try to build host-alsa-lib which does not
exists.
This patch define basic dependencies and conf opt for the host variant.
Reported-by: Eric Limpens <limpens@gmail.com>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The package infrastructure add automatically the "dirs" dependency so
remove it when the package infrastructure is being used.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As stated in the buildroot user manual add just a single space before
and after a '=' sign.
Break long lines.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch prepends TARGET_MAKE_ENV to $(MAKE) and $(QT_QMAKE) command
lines, to make sure PATH is set correctly, and to line up with the qt5
packages that do this consistently.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also adjust the license details and refresh patches.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes
http://autobuild.buildroot.org/results/fc6/fc64896ca5c3b05dfe4b5c5e7d25fc4b6c9976ad/
and a bunch of similar failures.
When Lua package is selected, libubox sets an option to build with Lua
binding. Unfortunately, if LUAPATH is not passed libubox seeks it on
the host instead of staging due to hard coded pkg-config commands in
its CMake file. As a result Lua is not found and the build fails.
Fix it by passing LUAPATH in LIBUBOX_CONF_OPT.
Similarly, libubox seeks LUA_CFLAGS with the host's pkg-config for the
same reason. To prevent potential errors, fix it by passing LUA_CFLAGS
in LIBUBOX_CONF_OPT.
Finally, libubox fails to build with Lua 5.2 because it uses functions
removed from this version.
Fix it by activating the option only with Lua 5.1.
Signed-off-by: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Append -lz to the cups linking libs to fix a problem like this one:
../cups/libcups.a(file.o): In function `cupsFileSeek':
/home/test/test/1/output/build/cups-1.3.11/cups/file.c:1444: undefined
reference to `inflateEnd'
collect2: error: ld returned 1 exit status
make[2]: *** [ipp] Error 1
make[2]: *** Waiting for unfinished jobs....
This solution is the same used upstream in newer versions.
Fixes:
http://autobuild.buildroot.net/results/f3d/f3d4f67ce7ee1d54f5bd4c87dfddb7417db614e5/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
XBMC is an award-winning free and open source (GPL) software media
player and entertainment hub for digital media.
We do provide a sub-option for each major feature we support, to avoid
letting the user hunt-down required libraries, since the dependency is
not always obvious and straightforward.
We also provide our own wrapper script, because the ones bundled in
XBMC are not suitable to all platforms. We need such a wrapper script
because XBMC exits with different exit codes, depending on how the user
quit XBMC: 0 is normal exit, 64 is for halt, and 66 is for reboot. So
we can't simply call the real XBMC binary from the startup script, or
we would lose this information. So, we provide a wrapper script that
takes appropriate action according to the above exit codes.
When run as root from a startup script, there is no HOME set, so XBMC
defaults to saving its configuration in /.xbmc (yes, at the root of the
rootfs). Since this does not play well with read-only filesystems (and
is inherently ugly anyway), and sicne there is no real clean way to tell
XBMC where to store its configuration, just provide a symlink to a better
place: /.xbmc -> /var/xbmc (note: the only location _guaranteed_ to be
writable is /tmp, but we want the configuration to survive a reboot. So,
/var/xbmc looks a better place than /var/run/xbmc. and the user will
have to take action to ensure /var/xbmc be writable.) (note: for this
reason, we do not want to set $HOME to /root either, even if it is root
running XBMC.)
Some of XBMC sub-options select libraries that depend on toolchain options,
such as IPv6. But those are already covered, being also implicit
dependencies of XBMC, as XBMC can only be used on an (e)glibc toolchain
anyway. When^WIf XBMC is one day buildable under uClibc/musl, this will be
time to revisit those dependencies.
This package was originally found at : https://github.com/huceke/buildroot-rbp
By gimli <ebsi4711@gmail.com>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: gimli <ebsi4711@gmail.com>
Cc: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
beecrypt used to pull in icu automatically when C++ support was enabled,
but since icu is pretty large and slow, that automatic dependency was
removed. However, it is not obvious to the user that he should enable
icu in order to get C++ support in beecrypt. Therefore, make the C++
support a user visible config option and mention icu in the help text.
It would also be possible to automatically enable C++ support if icu
happens to be selected for another reason, but that doesn't really seem
to offer an advantage.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
All of qt.mk's target installs ensure that their destinations exist,
except for /usr/lib. So do the same for /usr/lib, for consistency,
and in case some combination of custom fs skeleton plus dependency
on Qt leads to installing without a pre-existing /usr/lib directory.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch prepends TARGET_MAKE_ENV to $(MAKE) and $(QT_QMAKE) command
lines, to make sure PATH is set correctly, and to line up with the qt5
packages that do this consistently.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch prepends TARGET_MAKE_ENV to $(MAKE) and $(QT_QMAKE) command
lines, to make sure PATH is set correctly, and to line up with the qt5
packages that do this consistently.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The qmake step of qt5 packages may attempt to run pkg-config. If qmake is
executed in an environment where the buildroot host directory is not in
PATH, pkg-config from the build machine may be used (/usr/bin/pkg-config).
This causes qt5 package compilation to fail on machines that do not have
pkg-config installed.
Refer to mailing list thread [1] for a specific error case.
This patch prepends TARGET_MAKE_ENV (which sets PATH) to the qmake call.
Reported-by: Marco Trapanese <marcotrapanese@gmail.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[1] http://lists.busybox.net/pipermail/buildroot/2014-March/092283.html
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of automatically pulling in the (big) icu library if the toolchain
dependencies are available.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some new CA added, some removed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes http://autobuild.buildroot.net/results/5a8/5a85e0e132f38a4a1a42c2b041f66003b64e748a/
(and a bunch of similar failures)
libubox has optional json-c handling, including the legacy version which
used libjson.so. Unfortunately this support is buggy, so we end up with the
wrong compiler flags, and more importantly it gets confused if libjson is
enabled, as that also provides a (incompatible) libjson.so.
Fix it by disabling the legacy handling.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#6986
Prior to u-boot 2013.10, the GPL license text was stored in COPYING and not
Licenses/gpl-2.0.txt, breaking legal-info.
Work around it by simply copying the file from the old location to the new
if present.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Systemd requires at least Linux headers 3.0 because it uses:
- setns(2) syscall, introduced in 3.0.
- IFLA_GROUP from if_link.h, introduced in 2.6.39.
Fixes http://autobuild.buildroot.net/results/098/09866da023d527b3c228a98f1fde104e780e1883/
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the ncurses package conditionally defines macros to install
the panel, form and menu libraries. This means we duplicate the install
step for each library type.
Rather than defining a set of macros, this change introduces a variable
for the set of installed libraries, $(NCURSES_LIBS-y). We use this in a
single macro to perform the library installation in one place.
Based on a change suggested by Thomas Petazzoni
<thomas.petazzoni@free-electrons.com>.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: needs !static, use += for _CONF_OPT]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
