Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Simon Dawson <spdawson@gmail.com>
Tested-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch is no longer necessary since strace-v4.5.15 which always
defines CTL_PROC. Specifically strace git commit
35a55785ea8ff44d214af52085e3a5ea624730aa.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When building gdb for the host, we properly pass the PATH (through
HOST_CONFIGURE_OPTS) during the configure step, but we forget to do so
for the compilation step.
The result of this is that when the Crosstool-NG backend is used, gawk
is built and installed in $(HOST_DIR), as a dependency of the
crosstool-ng package.
Then, the host gdb configure script detects this gawk binary
($(HOST_DIR) is in the PATH), and assumes gawk is
available. Unfortunately, during the compilation step, it fails to
find the expected gawk binary, because $(HOST_DIR) is no longer in the
PATH. This causes the following build failure:
http://autobuild.buildroot.org/results/067d0c2ea01673ba98ec11de2426f1ab92dac800/build-end.log
In order to fix this, we simply call the compilation step of gdb for
the host with $(HOST_MAKE_ENV), as it should have been done from the
beginning.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The libpcap package contained some interesting attempts to support a
static-only build, but it was not working:
http://autobuild.buildroot.org/results/01038d3b970092d894d2bae80679247e65722785/build-end.log
In fact the configure.in of libpcap has provision to support
--enable-shared/--disable-shared, but the generated configure script
in the libpcap package has not been regenerated with the configure.in
changes.
So basically, enabling LIBPCAP_AUTORECONF=YES ensures that the
configure script gets generated, which brings us a working
--enable-shared / --disable-shared.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The depends-on-vs-select part of the manual really deserves its own
section title (especially because it is referred to and the xref gets
a 'sinpara' in PDF if the section doesn't have a title). So restructure
the surrounding sections to reduce the section nesting depth.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The tutorial for autotools-package and cmake-package currently gives
the bad example of setting _INSTALL_TARGET to YES, which is the default.
So change this into an example with _INSTALL_TARGET = NO, and explain in
which case this is relevant.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Various consistency and correctness improvements.
Also removing some sentences that are not or no longer relevant.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Newer kernels had a slight change in the random number API so the OCF
patchset requires a slight tweak to build and run properly.
Affected kernels are, per series:
>=3.0.41, >=3.2.29, >=3.4.9, >=3.5.2 and any newer version.
The fix is applied by detecting the API change rather than guessing the
kernel version.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The autobuilders are falling over building lcdproc, with failures like the
following.
http://autobuild.buildroot.net/results/622b7da10be751c725ba25eb40102269790b4b03/build-end.log
As Thomas Petazzoni has pointed out, the compile command lines incorrectly
contain host header and library search paths, such as the following.
-I/home/peko/scratch/host/usr/include/freetype2
-L/home/peko/scratch/host/usr/lib -lfreetype
This patch changes the lcdproc package to pass the freetype installation
prefixes on the configure command line.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A /dev/console node must be present in rootfs when the Linux kernel
boots otherwise the kernel will print the following warning:
"Warning: unable to open an initial console"
This is because when we use an initramfs the /dev directory is not
populated at this point. This can cause problems when a program
(e.g ldso with early debugging enabled) opens a standard file
descriptor for read/write before these descriptors are actually
created by the init process later on.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix build breakage, use the version of the ptrace header file in asm
instead of sys. Also, fix GDB running on 64 bit hosts. GDB was using
unsigned long for 32-bit registers, but unsigned long is 64 bit on
64-bit hosts.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Except for architecture and processor names, buildroot uses capitalized
configuration names, so change the macro names for xtensa to follow that
standard.
Change the overlay file to have a subdirectory for each component
(gdb, binutils, gcc, etc.) to make it more future-prove.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Busybox does partial linking of its modules before linking everything
together into the binary. Those partial links are done without the
standard libraries, but that also means -ltirpc can't be found. In
addition, this probably fails horribly with static linking (untested).
The problem is that the LDFLAGS are also used in the partial links.
So instead, use CFLAGS_busybox, which is only used for the busybox
link step. Also make sure that this is passed through the environment,
not on the command line, so the busybox Makefile can still append to
it.
Fixes e.g.
http://autobuild.buildroot.net/results/e8351e3ba86fdcdb2999548658271a6fde0526a9
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to solve
http://autobuild.buildroot.org/results/34f6843137efda20626af72714c110280ec577d7/build-end.log,
this patch makes the D-Bus package as well as all the packages that
select the D-Bus package 'depends on BR2_USE_MMU'.
In addition, for the specific case of gvfs, the missing
BR2_TOOLCHAIN_HAS_THREADS dependency is added (threads are required by
D-Bus, so they are also required by gvfs which selects D-Bus).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
uClibc pretends to implement <fenv.h> as it installs the header, but
in practice, it only implements the functions for i386. This makes gsl
unhappy as it detects fenv.h, but then cannot use the fenv functions.
Fixes:
http://autobuild.buildroot.org/results/732cc07faeca2a9098dc5106e8f654eb1323451a/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The 1.2 we were using doesn't build on ARM Thumb platforms:
http://autobuild.buildroot.org/results/94ef6be7dcb31021462e7313724217627d4b29df/build-end.log
Moreover, the 7.2 version is the one used by Debian/Ubuntu, and it has
been tested to build fine with the two packages that depend on
libatomic_ops: libdrm and pulseaudio.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
mesa3d now generates some C files at build time (related to the OpenGL
API) from XML files. This generation process is done using Python
scripts that require the libxml2 Python module.
Patch based on the initial work of Will Wagner (Thanks Will).
Signed-off-by: Vellemans Noel <noel.vellemans@visionbms.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Patch based on the initial work of Will Wagner (Thanks Will).
libxml2 host library with python support is required to build mesa3d (7.10.1)
Signed-off-by: Vellemans Noel <noel.vellemans@visionbms.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 3c90f75496 made Python use a
special ./configure command in order to avoid --enable-shared
--disable-static being passed, because it was causing issues when
building certain modules for a 64 bits system.
However, not having a shared libpython2.7 library for the host
prevents the libxml2 Python binding to get built.
So instead, we use the default configure command, but we add
--enable-static which is needed for Python to build correctly.
Note that we tested the build of Python on a 64 bits host as well as
the build of Python for a 64 bits target, and both went fine, with all
modules built properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
(Possibly) fixes#5354
The lua shared library patch was creating the shared library with
-nostdlib -lgcc for some unknown reason, which most likely is
the reason for the link issue reported in #5354.
Fix it by dropping these arguments, so gcc gets to figure out itself
what dependencies are needed.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
