Commit Graph

73 Commits

Author SHA1 Message Date
Alexander Boettcher
52cf25982a run: clean pulsar config file during a clean_run
tool/autopilot complains about this left over file
2013-06-17 12:14:10 +02:00
Alexander Boettcher
1b60fd6147 run: power off only the port which was switched on 2013-06-12 15:32:26 +02:00
Christian Helmuth
b355897f53 update x86emu to 1.20
+ document x86emu move from os -> libports

Fixes #456
2013-06-12 11:35:12 +02:00
Stephan Mueller
4f52e793a0 GPG signature verification of tool chain
The downloaded archives for building the tool chain are checked for its
signature before using them. In case of a signature failure, the build
is interrupted.

Issue #748
2013-06-10 10:44:09 +02:00
Stephan Mueller
4c89f4f00f Hash verification tool
This tool verifies the integrity of a given file with a hash. It uses
md5sum, sha1sum and sha256sum as needed.

Issue #748
2013-06-10 10:44:09 +02:00
Stephan Mueller
9b22983e58 GPG signature verification tool
The signature verification tool uses gpg to verify the detached
signature of the given file.

It also tries to obtain the signing key if it is not part of the local
key ring.

Signature verification implies the verification of the integrity and
authenticity of a given file.

Issue #748
2013-06-10 10:44:09 +02:00
Stefan Kalkowski
8ac5ae2248 Increase flexibility for serial devices in run-tool
Instead of using a fixed command like picocom in the run tool,
it's better to have the flexibility to set the whole command that
connects to the serial device. Therefore, it's possible for instance
to connect to a remote serial device exported via TCP/IP by using tools
like socat.
2013-05-28 11:40:56 +02:00
Stefan Kalkowski
5e321732df Make NETIO-230B power plug configureable 2013-05-28 11:33:14 +02:00
Stefan Kalkowski
6826a07133 Fix typo in run tool 2013-05-28 11:24:02 +02:00
Christian Prochaska
4a9b1c6aab base-linux: add ARM support
This patch introduces a new platform 'linux_arm' for building and running
Genode/Linux on an ARM device.

Known limitations:

- libc 'setjmp()'/'longjmp()' doesn't currently save/restore floating
  point registers

Fixes #746.
2013-05-24 14:55:37 +02:00
Alexander Boettcher
99421a2a82 run: switch off IP power_plug adapter after test
Avoid running the native machines if not used after test.
2013-05-17 15:24:50 +02:00
Alexander Boettcher
b2fee4c7b1 autopilot: option to keep existing test directory 2013-05-17 12:03:57 +02:00
Alexander Boettcher
da310bd726 tool: create appropriate build.conf for hw_arndale 2013-05-17 12:03:33 +02:00
Alexander Boettcher
6e1b9a823d autopilot: redirect stderr to log file 2013-05-17 11:54:01 +02:00
Norman Feske
8ac6d8c96c base-hw: Support for Raspberry Pi 2013-05-15 20:48:07 +02:00
Christian Prochaska
33bb8662a0 tool/run: fix 'interact' command invocation
Use the '-i' option to pass the spawn id to the 'interact' command.

Fixes #737.
2013-05-10 11:16:13 +02:00
Alexander Boettcher
138a37765f run: add support for IP power switch NETIO-230B 2013-05-10 11:16:12 +02:00
Alexander Boettcher
2beb851c5a run: add acpi spec as default to foc/nova 64bit 2013-05-10 11:16:11 +02:00
Alexander Boettcher
85c6640795 run: add support to specify 'serial' via RUN_OPT
If the target machine is connected locally one may specify
"serial" as target in the RUN_OPT variable to get the test output.

Used for panda and arndale on foc and hw.
2013-05-10 11:16:10 +02:00
Alexander Boettcher
df985bda84 run: support RUN_OPT for all platforms
Use RUN_OPT="--target ..." to select the backend test method.

Supported values so far:

qemu     - qemu + grub bootloader (default)
qemu+pxe - qemu + pulsar bootloader (PXE)
amt      - Intel AMT (reset+serial output) + pulsar bootloader

Related to issue #598
2013-05-10 11:16:10 +02:00
Alexander Boettcher
2a761c7fea run: extend genode_until_run by a spawn id
genode_until_run can be called now with a spawn id to able to reattach to a
spawned process (amt, serial output). Run scripts can now call genode_until_run
multiple times.
2013-05-08 09:42:44 +02:00
Alexander Boettcher
267239147a run: introduce explicit wait_for_output
To be used by base-* run/env scripts
2013-05-08 09:42:44 +02:00
Alexander Boettcher
5485fe6f18 run: add support to query qemu support
To be used by the base-* specific run/env scripts to choose the appropriate
test backend.
2013-05-08 09:42:44 +02:00
Alexander Boettcher
3593c7fb4d run: move general AMT support to tool/run
Issue #679
2013-04-12 10:56:27 +02:00
Norman Feske
e5c57bddcc Add ports-foc to build.conf for foc_arndale 2013-03-27 19:27:25 +01:00
Torsten Hilbrich
87f83c1cff build.mk: Fix dependency on $(LIB_DEP_FILE)
The previous fix in 6b33757154 was
invalid.
2013-03-20 10:02:34 +01:00
Christian Helmuth
6f2e36279a Use mkisofs to create ISO images
mkisofs is the original ISO creation tool from cdrtools available on
many UNIX systems. genisoimage on the other hand is part of a mostly
unmaintained fork of cdrtools very specific to Debian Linux and its
derivates (e.g., Ubuntu). Fortunately, genisoimage (as we used it) is
completely invocation-compatible to mkisofs.

Fixes #627.
2013-03-07 13:41:30 +01:00
Christian Prochaska
ce075c05b9 Skip Qemu execution for the Arndale platform
Fixes #672.
2013-02-26 15:17:00 +01:00
Sebastian Sumpf
554876ceee foc_arndale: Added 'create_buildir' support 2013-02-25 16:45:47 +01:00
Martin Stein
1f95a9be03 hw_arndale: create builddir support
ref #601
2013-02-20 19:37:45 +01:00
Norman Feske
ebc73f66df Remove base-mb platform
This base platform is no longer maintained.

For supporting the Microblaze CPU in the future, we might consider
integrating support for this architecture into base-hw. Currently
though, there does not seem to be any demand for it.
2013-02-20 13:17:39 +01:00
Norman Feske
3049c1004c Turn 'Timer::Session' into asynchronous interface
The 'Timer::Session::msleep' function is one of the last occurrences of
long-blocking RPC calls. Synchronous blocking RPC interfaces turned out
to be constant source of trouble and code complexity. I.e., a timer
client that also wants to respond to non-timer events was forced to be a
multi-threaded process. This patch replaces the blocking 'msleep' call
by a mechanism for programming timeouts and receiving wakeup signals in
an asynchronous fashion. Thereby signals originating from the timer can
be handled along with signals from other signal sources by a single
thread.

The changed interface has been tested on Linux, L4/Fiasco, OKL4, NOVA,
L4ka::Pistachio, Codezero, Fiasco.OC, and hw_pbxa9. Furthermore, this
patch adds the timer test to autopilot.

Fixes #1
2013-02-14 10:36:06 +01:00
Norman Feske
35f767ec38 Add acpi spec value for nova_x86_32 and foc_x86_32 2013-01-10 23:05:43 +01:00
Norman Feske
73ab30c22c Update copyright headers to 2013 2013-01-10 21:44:47 +01:00
Stefan Kalkowski
edb48873c1 base-hw & imx53: enable nested init
Fix #575
2013-01-08 11:36:52 +01:00
Norman Feske
0a084ebe52 Add failsafe test to autopilot 2013-01-07 16:31:31 +01:00
Torsten Hilbrich
6b33757154 build.mk: Add dependency for init_libdep_file on directory
This should ensure that the directory is created before trying to
create a file within it.

This hopefully fixes errors like the following when using parallel
builds:

checking library dependencies...
/bin/bash: line 19: var/libdeps: No such file or directory
make[5]: *** [init_libdep_file] Error 1
2012-12-05 13:55:28 +01:00
Martin Stein
f464b61829 base-hw & imx31: support by 'create_builddir'
Fix #537
2012-11-29 09:55:09 +01:00
Sebastian Sumpf
7d8f446475 OSS: Open Sound System server
Currently supports Intel HDA, AC97, and ES1370 audio cards. See README
for further details.
2012-11-27 15:32:39 +01:00
Alexander Boettcher
7ba23432ac Add pointers to sources of used boot loaders 2012-11-27 10:40:53 +01:00
Alexander Boettcher
c63a6d94f6 NOVA: add chain_loader 'bender'
'Bender' can detect serial ports accessible via PCI and writes the I/O ports
to the Bios Data area (BDA).

Usage together with the PXE bootloader ease life running Genode/NOVA on native
hardware, where a standard serial device isn't available anymore anywhere.
2012-11-23 12:20:28 +01:00
Stefan Kalkowski
53529e0eeb Fiasco.OC: enable i.MX53 platform 2012-11-23 12:20:27 +01:00
Stefan Kalkowski
88316abca1 Merge panda_a2 and panda SPEC (fix #505, fix #506)
There is no obvious reason for having two different SPEC variables, definitions,
and pathes for the Pandaboard platform. It even lead to problems regarding the
omap4 framebuffer driver (look at issue #505 and #506).
2012-11-23 12:20:27 +01:00
Norman Feske
bcabbe2c92 Add 'Thread_base::join()'
Using the new 'join()' function, the caller can explicitly block for the
completion of the thread's 'entry()' function. The test case for this
feature can be found at 'os/src/test/thread_join'. For hybrid
Linux/Genode programs, the 'Thread_base::join()' does not map directly
to 'pthread_join'. The latter function gets already called by the
destructor of 'Thread_base'. According to the documentation, subsequent
calls of 'pthread_join' for one thread may result in undefined behaviour.
So we use a 'Genode::Lock' on this platform, which is in line with the
other platforms.

Related to #194, #501
2012-11-19 12:43:34 +01:00
Norman Feske
76b60566b7 Whitespace fix 2012-11-05 17:28:51 +01:00
Christian Prochaska
c99dd8fdf8 Use 'CURDIR' make variable in Genode make files
The bash-builtin 'pwd' command uses the 'st_dev' and 'st_ino' members of
the 'stat' struct to compare the path from the 'PWD' environment variable
with the path returned by 'getcwd()'. These members don't get set
correctly in Noux and therefore the 'pwd' command sometimes returns wrong
results when building Genode in Noux. With this patch the 'CURDIR' make
variable gets used instead of calling 'pwd'.

Fixes #454.
2012-11-03 09:54:14 +01:00
Christian Prochaska
dedfd3526d tool chain: binutils 2.22 and GCC 4.7.2 update 2012-10-30 18:16:19 +01:00
Christian Prochaska
e3b1063a36 tool chain: gcc-4.7.1 fixes 2012-10-30 18:16:05 +01:00
Taru Karttunen
443d611dd2 tool chain: switch to gcc-4.7.1 2012-10-30 18:15:27 +01:00
Christian Prochaska
1483f1032d Remove broken compiler check
The 'build.mk' file checks if the tool chain to be used supports the
'-static' and '-fno-stack-protector' flags, but this check always fails
for the current Genode tool chain because it cannot create executable
files without explicitly specifying the 'crt0' and library files to be
linked, which the check doesn't.

This patch removes the compiler check.

Fixes #358.
2012-09-24 09:18:00 +02:00