This patch handles the case where a PD's cap quota becomes exhausted
on the attempt to transfer caps via 'Env::pd().transfer_quota'. The
solution mirrors the existing code for RAM quota.
Prior this patch, the 'transfer_quota' operation would trigger an
'Out_of_caps' exception.
These are time-type conversion functions (including leap years and
seconds) taken from musl-libc git rev
c82d3bada30cb27e14abda7859da5d2e784830ff with some adaptions. Musl is
licensed under permissive MIT license.
Issue #3450
A client may register a signal handler to be notified whenever the
RTC value was changed, i.e., a mis-configured clock was synchronized,
by calling 'set_sigh()'.
Issue #3450
The GEMDOS variant is supported by NetBSD's msdos file-system driver.
However, it must explicitly be enabled by a mount flag. This patch
adds the principle ability for passing mount flags to file system
drivers and enables the MSDOSFSMNT_GEMDOSFS flag based on the
config attribute 'gemdos="yes"'.
Issue #3471
This patch enhances part_block with support for parsing the AHDI
partition scheme, and the detection of the GEMDOS variant of FAT as used
by Atari TOS. As a side effect of the implementation, the patch improves
the MBR parsing code by avoiding pointers and using const qualifiers.
Fixes#3470
This patch handles the situation where the usb_block_drv exits for any
reason, in particular when the driver fails to initialize the device. In
such cases, the usb_block_drv used to stay stale in the system,
effectively preventing the device from being passed to a VM. With the
patch, the USB storage device gets flagged as failed, the usb_block_drv
is removed from the runtime, and the condition is reflected at the user
interface.
This situation occurred on the attempt to access an iomega zip drive
with a version of the usb_block_drv without support for the START-STOP
command, but it may potentially also occur in other circumstances.
Fixes#3468
On Fujitsu S936, evaluating the _BIF method on each battery-info update
successively increased the RAM usage, while _BST (dynamic battery
status) and _STA (generic status) did not show this behavior. Therefore
this commit retrieves only dynamic information periodically (resp. on
SCI IRQ). Now, acpica hast static RAM usage in idle state for 24+ hours.
The root cause for the increased RAM usage is still shady. While it
could just be normal that it grows until a certain yet unknown limit,
there may also be memory leak in contrib code or some strange AML on the
designated notebook.
Issue #3454
This mode is used on Linux (if acpi=strict is not set on boot cmdline)
and Windows. The mode ignores certain errors and/or bad AML constructs.
1) Allow "implicit return" of last value in a control method
2) Allow access beyond the end of an operation region
3) Allow access to uninitialized locals/args (auto-init to integer 0)
4) Allow ANY object type to be a source operand for the Store() operator
5) Allow unresolved references (invalid target name) in package objects
6) Enable warning messages for behavior that is not ACPI spec compliant
Whether an SoC has the multiprocessing extensions can be read out
from the identification registers, and does not need to be specified
in each board header.
Ref #3445
The rtc_drv on x86 can now by used to also set the RTC. If the config
attribute 'allow_setting_rtc' is set to 'yes' the driver will update
the RTC from the content of the 'set-rtc' ROM module. A valid ROM must
contain a top node with the following attributes: 'year', 'month',
'day', 'hour', 'minute' and 'second'.
* Only rudimentary checking of the provided values is done.
* '12H' mode is not supported.
Fixes#3438.
This commit implements the ssh exec channel request. It also handles
some shortcommings on the interactive channel like exit and concurrent
session establishments.
Pipes into the channel do not work yet. E.g.:
echo foobar | ssh noux@localhost -p 5555 "cat > /rw/test.txt"
The issue described with FIXME in Ssh::Server::incoming_connection()
could not be reproduced and might have been fixed with the improved
file descriptor handling.
Fixes#3401
To enable the clipboard for a VM, add the following node to the
<Hardware> sub node of your machine.vbox configuration:
<Clipboard mode="Bidirectional"/>
Issue #3437
The triggering of a new depot query can happen more than once per
activation of the sculpt manager if multiple conditions call for updated
information about the depot. When this happens, the depot-query
component produces intermediate results, which are not consumed by the
sculpt manager. By deferring depot queries for a few milliseconds, we
avoid such intermediate queries, relieving the workload of the
depot-query component at system boot time.
Issue #3436
The diagnostic messages presented in the runtime dialog lacked the name
if the subsystem was created from a launcher, e.g., the 'vm'. Instead of
determining the subsystem name from the start-XML-node (a launcher has
no 'name' attribute but the name corresponds to the launcher's file
name), the name is now passed as a dedicated argument.
This patch enhances the noux_vim.run scenario to make it usable as a
testing ground of the terminal's and window manager's resize and
clipboard handling.
Issue #2079
The labels of clipboard ROM and clipboard report sessions of WM clients
must be consistent with the client's nitpicker label. Hence, we must
route those sessions through the window manager, analogously to the
approach taken for shape reports in #3165.
Issue #3437
When setting the config attribute 'match_labels="yes"', the clipboard
performs plausibility checks for copy and paste operations against the
nitpicker focus.
Issue #3437
The warning falsely detected cases where shared objects where loaded before
exec_static_constructors() was called as unneeded even in cases were the
binary itself contained static globals.
The commit also removes one redundant call to exec_static_constructors()
from the block tester.
This patch introduces two caches to the depot-query tool.
- A stat cache remembers the results of 'Directory::file_exists'
calls.
- The 'Cached_rom_query' caches the result of scanning the depot
for a given ROM module and pkg path. To elminates the need to
parse 'archive' files of pkgs referenced from other pkgs or
for the repeated instantation of the same pkg.
Both caches are bypassed whenever referring to the 'local' depot user.
Fixes#3427
When resizing windows of clients that respond very slowly to resize
requests, the window's size sometimes snapped back to its original size
immediately after finishing the drag operation.
The problem was caused by the interplay of the layout rules (obtained
via the 'rules' ROM, generated by the 'rules' report) and the
temporary interactive state that occurs during drag operations.
The rules are updated only at the time of releasing the button to keep
the overhead while dragging the window low. However, when releasing the
mouse, the (now outdated) rules kicked back into effect, triggering
resize requests for the window to its old size.
The patch solves this problem by decoupling the dragged state of a
window from the physical release of the button. The button release
triggers a transition from a DRAGGING to a SETTLING state and programs
a timer. In the SETTLING state, the windows behave as in DRAGGING state,
giving the interactive geometry precedence over the rules-dictated
geometry. During this state, further responses of window-resize requests
may come in and are handled like dragging was still in progress. After a
timeout, however, the current window layout is conserved as a new rules
report and the state goes back to IDLE.
For clients that takes a very long time (in particular, VirtualBox when
resizing the desktop, which takes sometimes multiple seconds), the
snap-back artifact can still occur, but the effect is reduced.
This problem surfaced with the new tool chain that changes the stack
layout. A pointer to the the config XML data was kept in the main object
but pointed to a stack variable. This patch fixes it by removing the
pointer.
Fixes#3416
This is a follow-up commit to the libc update. The FreeBSD
implementation of sigset or sigaction calls the __libc_sigaction now.
The patch fixes the SIGWINCH handling for Vim when interactively
resizing the terminal window.
Fixes#3424
- make port able to be prepared repeatedly
Rpcgen refuses to overwrite an already existing header, so try to
always remove it beforehand
- get rid of 'cp' warning 'cp: warning: source file
'src/lib/libc/sys/sys/time.h' specified more than once'
- silence patch message 'patch unexpectedly ends in middle of line'
Fixes#3420.
This patch adds the missing propagation of the maximized state from the
layout rules to the internal representation of a window. Without this
patch this state could be toggled by clicking on the maximizer button
only.
The decorator's detection of the hovered window element was inaccurate,
which resulted in "jumping" windows in some situations, ultimately
caused by a combination of three different mechanisms.
First, when moving the pointer into the area of a window, the decorator
would detect the hovering of the left border whenever the distance of
the pointer from the border was less than the half of the theme texture
(e.g., 64x64 pixels for the default theme). However, if the left border
margin is set to a small value (e.g., 1), there is an overlap of the
sensitive resize border area and the content. Hence, chances were quite
high that - when moving the pointer from the left into the window - the
hover report would contain the hovering of the left border.
Second, the window manager tries to hide pointer movements from the
decorator if possible. It informs the decorator of the pointer position
if any decoration is hovered or if a new window is hovered. But it does
not expose pointer movements within a window to the decorator. For this
reason, the decorator would not update the hover report as long as the
pointer stays within a once hovered window. In the situation described
above, the hover report would still contain the stale information about
the hovering of the left resize border.
Third, when the user clicks on the window, the decorator examines the
most recent hover report and - in the situation described above - finds
the left border hovered. Consequently, it initiates a window-drag
operation. While resizing the window with the left border, the window
layouter pins the right border of the window to its current position.
All window-size changes of the client will be applied towards the left
(dragged) border. In the case of the top view, which continuously
resizes the window by itself, the window would "jump". In reality, it
actually tries to respond an interactive resize operation. The window
layouter cannot guess that the client is not responding to window
layouter's resize request but is acting independently.
This patch fixes the jumping window problem for the case where the
pointer hovers the overlapping area of the resize border and the
content. However, when trying the to interactively resize the top window
via the bottom-left corner, the "jumping" can still be observed.
Fixes#3303
By decoupling the leitzentrale from the (contended) boot CPU, the fading
on F12 interferes much less with animations like nano3d deployed in the
runtime.
Fixes#3268
In the past, the core-only privileged syscall `update_pd` was used only
to invalidate the TLB after removal of page-table entries.
By now, the whole TLB at least for one protection domain got invalidated,
but in preparation for optimization and upcomingARM v8 support,
it is necessary to deliver the virtual memory region that needs to get
invalidated. Moreover, the name of the call shall represent explicitely
that it is used to invalidate the TLB.
Ref #3405
There are still nightly tests like test-tcp_bulk_lxip on sel4 x86_64 qemu
that manage to hit the test timeout of the run script although the test was
successful. So, raise the extra time added by the run script to 30 seconds.
Ref #3411
Some platforms (sel4 imx6/imx7) cannot manage to execute all tests in a single
boot. Thus, we re-boot them periodically after a given maximum number of tests
to avoid that arbitrary tests always fail due to the long uptime and not due to
the tests themselves.
If the maximum number of tests is set to 0, no limit is applied.
Fixes#3411
If a path element cannot be watched because it does not exist yet, the next
available parent directory is watched to detect the creation of the missing
path element. If a missing path element got created just between the failed
watch request for the element and the successful watch request for its parent
directory, the creation of the path element could remain unnoticed.
With this commit, 'fs_rom' tries to watch a path element again if the watch
request for its parent directory was successful.
Fixes#3398
The lazy-timer test depends on the faster-timer handler to be executed
before the fast timeout occurs, which was pretty hard to achieve on Qemu
and a busy host machine. Therefore, I increased the fast-to-faster
timeout ratio from 50/25 ms to 200/25 ms and set the test runtime to
4000 ms.
Move the _vfs_sync implementation from vfs_plugin.h to vfs_plugin.cc and
wrap all VFS access in the VFS_THREAD_SAFE macro.
Syncing must be made thread safe because it often happens when closing
files and may require suspending the current thread for I/O signal
dispatching.
Ref #3409
- use priorities solely with nova
- handle exceptions during vCPU creation
- avoid assertion in vga_vbda
- silence compiler warnings about outdated register keyword
Issue #3111
