Compare commits
No commits in common. "backup" and "master" have entirely different histories.
|
@ -0,0 +1,54 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Mon Feb 18 09:11:56 2008
|
||||
#
|
||||
BR2_HAVE_DOT_CONFIG=y
|
||||
# BR2_alpha is not set
|
||||
# BR2_arm is not set
|
||||
# BR2_armeb is not set
|
||||
# BR2_avr32 is not set
|
||||
# BR2_cris is not set
|
||||
# BR2_ia64 is not set
|
||||
BR2_i386=y
|
||||
# BR2_m68k is not set
|
||||
# BR2_mips is not set
|
||||
# BR2_mipsel is not set
|
||||
# BR2_nios2 is not set
|
||||
# BR2_powerpc is not set
|
||||
# BR2_sh is not set
|
||||
# BR2_sh64 is not set
|
||||
# BR2_sparc is not set
|
||||
# BR2_sparc64 is not set
|
||||
# BR2_x86_64 is not set
|
||||
# BR2_x86_i386 is not set
|
||||
# BR2_x86_i486 is not set
|
||||
# BR2_x86_i586 is not set
|
||||
BR2_x86_i686=y
|
||||
# BR2_x86_pentiumpro is not set
|
||||
# BR2_x86_pentium_mmx is not set
|
||||
# BR2_x86_pentium_m is not set
|
||||
# BR2_x86_pentium2 is not set
|
||||
# BR2_x86_pentium3 is not set
|
||||
# BR2_x86_pentium4 is not set
|
||||
# BR2_x86_prescott is not set
|
||||
# BR2_x86_nocona is not set
|
||||
# BR2_x86_core2 is not set
|
||||
# BR2_x86_k6 is not set
|
||||
# BR2_x86_k6_2 is not set
|
||||
# BR2_x86_athlon is not set
|
||||
# BR2_x86_athlon_4 is not set
|
||||
# BR2_x86_opteron is not set
|
||||
# BR2_x86_opteron_sse3 is not set
|
||||
# BR2_x86_barcelona is not set
|
||||
# BR2_x86_geode is not set
|
||||
# BR2_x86_c3 is not set
|
||||
# BR2_x86_winchip_c6 is not set
|
||||
# BR2_x86_winchip2 is not set
|
||||
BR2_ARCH="i686"
|
||||
BR2_ENDIAN="LITTLE"
|
||||
BR2_GCC_TARGET_TUNE="i686"
|
||||
BR2_GCC_TARGET_ARCH="i686"
|
||||
|
||||
#
|
||||
# Target options
|
||||
#
|
|
@ -0,0 +1,15 @@
|
|||
/output
|
||||
/dl
|
||||
/.auto.deps
|
||||
/.config.cmd
|
||||
/.config.old
|
||||
/..config.tmp
|
||||
/.config
|
||||
*.depend
|
||||
*.o
|
||||
/*.patch
|
||||
/*.diff
|
||||
*.orig
|
||||
*.rej
|
||||
*~
|
||||
*.pyc
|
|
@ -0,0 +1,339 @@
|
|||
GNU GENERAL PUBLIC LICENSE
|
||||
Version 2, June 1991
|
||||
|
||||
Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
|
||||
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
Everyone is permitted to copy and distribute verbatim copies
|
||||
of this license document, but changing it is not allowed.
|
||||
|
||||
Preamble
|
||||
|
||||
The licenses for most software are designed to take away your
|
||||
freedom to share and change it. By contrast, the GNU General Public
|
||||
License is intended to guarantee your freedom to share and change free
|
||||
software--to make sure the software is free for all its users. This
|
||||
General Public License applies to most of the Free Software
|
||||
Foundation's software and to any other program whose authors commit to
|
||||
using it. (Some other Free Software Foundation software is covered by
|
||||
the GNU Lesser General Public License instead.) You can apply it to
|
||||
your programs, too.
|
||||
|
||||
When we speak of free software, we are referring to freedom, not
|
||||
price. Our General Public Licenses are designed to make sure that you
|
||||
have the freedom to distribute copies of free software (and charge for
|
||||
this service if you wish), that you receive source code or can get it
|
||||
if you want it, that you can change the software or use pieces of it
|
||||
in new free programs; and that you know you can do these things.
|
||||
|
||||
To protect your rights, we need to make restrictions that forbid
|
||||
anyone to deny you these rights or to ask you to surrender the rights.
|
||||
These restrictions translate to certain responsibilities for you if you
|
||||
distribute copies of the software, or if you modify it.
|
||||
|
||||
For example, if you distribute copies of such a program, whether
|
||||
gratis or for a fee, you must give the recipients all the rights that
|
||||
you have. You must make sure that they, too, receive or can get the
|
||||
source code. And you must show them these terms so they know their
|
||||
rights.
|
||||
|
||||
We protect your rights with two steps: (1) copyright the software, and
|
||||
(2) offer you this license which gives you legal permission to copy,
|
||||
distribute and/or modify the software.
|
||||
|
||||
Also, for each author's protection and ours, we want to make certain
|
||||
that everyone understands that there is no warranty for this free
|
||||
software. If the software is modified by someone else and passed on, we
|
||||
want its recipients to know that what they have is not the original, so
|
||||
that any problems introduced by others will not reflect on the original
|
||||
authors' reputations.
|
||||
|
||||
Finally, any free program is threatened constantly by software
|
||||
patents. We wish to avoid the danger that redistributors of a free
|
||||
program will individually obtain patent licenses, in effect making the
|
||||
program proprietary. To prevent this, we have made it clear that any
|
||||
patent must be licensed for everyone's free use or not licensed at all.
|
||||
|
||||
The precise terms and conditions for copying, distribution and
|
||||
modification follow.
|
||||
|
||||
GNU GENERAL PUBLIC LICENSE
|
||||
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
|
||||
|
||||
0. This License applies to any program or other work which contains
|
||||
a notice placed by the copyright holder saying it may be distributed
|
||||
under the terms of this General Public License. The "Program", below,
|
||||
refers to any such program or work, and a "work based on the Program"
|
||||
means either the Program or any derivative work under copyright law:
|
||||
that is to say, a work containing the Program or a portion of it,
|
||||
either verbatim or with modifications and/or translated into another
|
||||
language. (Hereinafter, translation is included without limitation in
|
||||
the term "modification".) Each licensee is addressed as "you".
|
||||
|
||||
Activities other than copying, distribution and modification are not
|
||||
covered by this License; they are outside its scope. The act of
|
||||
running the Program is not restricted, and the output from the Program
|
||||
is covered only if its contents constitute a work based on the
|
||||
Program (independent of having been made by running the Program).
|
||||
Whether that is true depends on what the Program does.
|
||||
|
||||
1. You may copy and distribute verbatim copies of the Program's
|
||||
source code as you receive it, in any medium, provided that you
|
||||
conspicuously and appropriately publish on each copy an appropriate
|
||||
copyright notice and disclaimer of warranty; keep intact all the
|
||||
notices that refer to this License and to the absence of any warranty;
|
||||
and give any other recipients of the Program a copy of this License
|
||||
along with the Program.
|
||||
|
||||
You may charge a fee for the physical act of transferring a copy, and
|
||||
you may at your option offer warranty protection in exchange for a fee.
|
||||
|
||||
2. You may modify your copy or copies of the Program or any portion
|
||||
of it, thus forming a work based on the Program, and copy and
|
||||
distribute such modifications or work under the terms of Section 1
|
||||
above, provided that you also meet all of these conditions:
|
||||
|
||||
a) You must cause the modified files to carry prominent notices
|
||||
stating that you changed the files and the date of any change.
|
||||
|
||||
b) You must cause any work that you distribute or publish, that in
|
||||
whole or in part contains or is derived from the Program or any
|
||||
part thereof, to be licensed as a whole at no charge to all third
|
||||
parties under the terms of this License.
|
||||
|
||||
c) If the modified program normally reads commands interactively
|
||||
when run, you must cause it, when started running for such
|
||||
interactive use in the most ordinary way, to print or display an
|
||||
announcement including an appropriate copyright notice and a
|
||||
notice that there is no warranty (or else, saying that you provide
|
||||
a warranty) and that users may redistribute the program under
|
||||
these conditions, and telling the user how to view a copy of this
|
||||
License. (Exception: if the Program itself is interactive but
|
||||
does not normally print such an announcement, your work based on
|
||||
the Program is not required to print an announcement.)
|
||||
|
||||
These requirements apply to the modified work as a whole. If
|
||||
identifiable sections of that work are not derived from the Program,
|
||||
and can be reasonably considered independent and separate works in
|
||||
themselves, then this License, and its terms, do not apply to those
|
||||
sections when you distribute them as separate works. But when you
|
||||
distribute the same sections as part of a whole which is a work based
|
||||
on the Program, the distribution of the whole must be on the terms of
|
||||
this License, whose permissions for other licensees extend to the
|
||||
entire whole, and thus to each and every part regardless of who wrote it.
|
||||
|
||||
Thus, it is not the intent of this section to claim rights or contest
|
||||
your rights to work written entirely by you; rather, the intent is to
|
||||
exercise the right to control the distribution of derivative or
|
||||
collective works based on the Program.
|
||||
|
||||
In addition, mere aggregation of another work not based on the Program
|
||||
with the Program (or with a work based on the Program) on a volume of
|
||||
a storage or distribution medium does not bring the other work under
|
||||
the scope of this License.
|
||||
|
||||
3. You may copy and distribute the Program (or a work based on it,
|
||||
under Section 2) in object code or executable form under the terms of
|
||||
Sections 1 and 2 above provided that you also do one of the following:
|
||||
|
||||
a) Accompany it with the complete corresponding machine-readable
|
||||
source code, which must be distributed under the terms of Sections
|
||||
1 and 2 above on a medium customarily used for software interchange; or,
|
||||
|
||||
b) Accompany it with a written offer, valid for at least three
|
||||
years, to give any third party, for a charge no more than your
|
||||
cost of physically performing source distribution, a complete
|
||||
machine-readable copy of the corresponding source code, to be
|
||||
distributed under the terms of Sections 1 and 2 above on a medium
|
||||
customarily used for software interchange; or,
|
||||
|
||||
c) Accompany it with the information you received as to the offer
|
||||
to distribute corresponding source code. (This alternative is
|
||||
allowed only for noncommercial distribution and only if you
|
||||
received the program in object code or executable form with such
|
||||
an offer, in accord with Subsection b above.)
|
||||
|
||||
The source code for a work means the preferred form of the work for
|
||||
making modifications to it. For an executable work, complete source
|
||||
code means all the source code for all modules it contains, plus any
|
||||
associated interface definition files, plus the scripts used to
|
||||
control compilation and installation of the executable. However, as a
|
||||
special exception, the source code distributed need not include
|
||||
anything that is normally distributed (in either source or binary
|
||||
form) with the major components (compiler, kernel, and so on) of the
|
||||
operating system on which the executable runs, unless that component
|
||||
itself accompanies the executable.
|
||||
|
||||
If distribution of executable or object code is made by offering
|
||||
access to copy from a designated place, then offering equivalent
|
||||
access to copy the source code from the same place counts as
|
||||
distribution of the source code, even though third parties are not
|
||||
compelled to copy the source along with the object code.
|
||||
|
||||
4. You may not copy, modify, sublicense, or distribute the Program
|
||||
except as expressly provided under this License. Any attempt
|
||||
otherwise to copy, modify, sublicense or distribute the Program is
|
||||
void, and will automatically terminate your rights under this License.
|
||||
However, parties who have received copies, or rights, from you under
|
||||
this License will not have their licenses terminated so long as such
|
||||
parties remain in full compliance.
|
||||
|
||||
5. You are not required to accept this License, since you have not
|
||||
signed it. However, nothing else grants you permission to modify or
|
||||
distribute the Program or its derivative works. These actions are
|
||||
prohibited by law if you do not accept this License. Therefore, by
|
||||
modifying or distributing the Program (or any work based on the
|
||||
Program), you indicate your acceptance of this License to do so, and
|
||||
all its terms and conditions for copying, distributing or modifying
|
||||
the Program or works based on it.
|
||||
|
||||
6. Each time you redistribute the Program (or any work based on the
|
||||
Program), the recipient automatically receives a license from the
|
||||
original licensor to copy, distribute or modify the Program subject to
|
||||
these terms and conditions. You may not impose any further
|
||||
restrictions on the recipients' exercise of the rights granted herein.
|
||||
You are not responsible for enforcing compliance by third parties to
|
||||
this License.
|
||||
|
||||
7. If, as a consequence of a court judgment or allegation of patent
|
||||
infringement or for any other reason (not limited to patent issues),
|
||||
conditions are imposed on you (whether by court order, agreement or
|
||||
otherwise) that contradict the conditions of this License, they do not
|
||||
excuse you from the conditions of this License. If you cannot
|
||||
distribute so as to satisfy simultaneously your obligations under this
|
||||
License and any other pertinent obligations, then as a consequence you
|
||||
may not distribute the Program at all. For example, if a patent
|
||||
license would not permit royalty-free redistribution of the Program by
|
||||
all those who receive copies directly or indirectly through you, then
|
||||
the only way you could satisfy both it and this License would be to
|
||||
refrain entirely from distribution of the Program.
|
||||
|
||||
If any portion of this section is held invalid or unenforceable under
|
||||
any particular circumstance, the balance of the section is intended to
|
||||
apply and the section as a whole is intended to apply in other
|
||||
circumstances.
|
||||
|
||||
It is not the purpose of this section to induce you to infringe any
|
||||
patents or other property right claims or to contest validity of any
|
||||
such claims; this section has the sole purpose of protecting the
|
||||
integrity of the free software distribution system, which is
|
||||
implemented by public license practices. Many people have made
|
||||
generous contributions to the wide range of software distributed
|
||||
through that system in reliance on consistent application of that
|
||||
system; it is up to the author/donor to decide if he or she is willing
|
||||
to distribute software through any other system and a licensee cannot
|
||||
impose that choice.
|
||||
|
||||
This section is intended to make thoroughly clear what is believed to
|
||||
be a consequence of the rest of this License.
|
||||
|
||||
8. If the distribution and/or use of the Program is restricted in
|
||||
certain countries either by patents or by copyrighted interfaces, the
|
||||
original copyright holder who places the Program under this License
|
||||
may add an explicit geographical distribution limitation excluding
|
||||
those countries, so that distribution is permitted only in or among
|
||||
countries not thus excluded. In such case, this License incorporates
|
||||
the limitation as if written in the body of this License.
|
||||
|
||||
9. The Free Software Foundation may publish revised and/or new versions
|
||||
of the General Public License from time to time. Such new versions will
|
||||
be similar in spirit to the present version, but may differ in detail to
|
||||
address new problems or concerns.
|
||||
|
||||
Each version is given a distinguishing version number. If the Program
|
||||
specifies a version number of this License which applies to it and "any
|
||||
later version", you have the option of following the terms and conditions
|
||||
either of that version or of any later version published by the Free
|
||||
Software Foundation. If the Program does not specify a version number of
|
||||
this License, you may choose any version ever published by the Free Software
|
||||
Foundation.
|
||||
|
||||
10. If you wish to incorporate parts of the Program into other free
|
||||
programs whose distribution conditions are different, write to the author
|
||||
to ask for permission. For software which is copyrighted by the Free
|
||||
Software Foundation, write to the Free Software Foundation; we sometimes
|
||||
make exceptions for this. Our decision will be guided by the two goals
|
||||
of preserving the free status of all derivatives of our free software and
|
||||
of promoting the sharing and reuse of software generally.
|
||||
|
||||
NO WARRANTY
|
||||
|
||||
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
|
||||
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
|
||||
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
|
||||
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
|
||||
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
|
||||
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
|
||||
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
|
||||
REPAIR OR CORRECTION.
|
||||
|
||||
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
|
||||
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
|
||||
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
|
||||
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
|
||||
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
|
||||
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
|
||||
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
|
||||
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
|
||||
POSSIBILITY OF SUCH DAMAGES.
|
||||
|
||||
END OF TERMS AND CONDITIONS
|
||||
|
||||
How to Apply These Terms to Your New Programs
|
||||
|
||||
If you develop a new program, and you want it to be of the greatest
|
||||
possible use to the public, the best way to achieve this is to make it
|
||||
free software which everyone can redistribute and change under these terms.
|
||||
|
||||
To do so, attach the following notices to the program. It is safest
|
||||
to attach them to the start of each source file to most effectively
|
||||
convey the exclusion of warranty; and each file should have at least
|
||||
the "copyright" line and a pointer to where the full notice is found.
|
||||
|
||||
<one line to give the program's name and a brief idea of what it does.>
|
||||
Copyright (C) <year> <name of author>
|
||||
|
||||
This program is free software; you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation; either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License along
|
||||
with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||
|
||||
Also add information on how to contact you by electronic and paper mail.
|
||||
|
||||
If the program is interactive, make it output a short notice like this
|
||||
when it starts in an interactive mode:
|
||||
|
||||
Gnomovision version 69, Copyright (C) year name of author
|
||||
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
|
||||
This is free software, and you are welcome to redistribute it
|
||||
under certain conditions; type `show c' for details.
|
||||
|
||||
The hypothetical commands `show w' and `show c' should show the appropriate
|
||||
parts of the General Public License. Of course, the commands you use may
|
||||
be called something other than `show w' and `show c'; they could even be
|
||||
mouse-clicks or menu items--whatever suits your program.
|
||||
|
||||
You should also get your employer (if you work as a programmer) or your
|
||||
school, if any, to sign a "copyright disclaimer" for the program, if
|
||||
necessary. Here is a sample; alter the names:
|
||||
|
||||
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
|
||||
`Gnomovision' (which makes passes at compilers) written by James Hacker.
|
||||
|
||||
<signature of Ty Coon>, 1 April 1989
|
||||
Ty Coon, President of Vice
|
||||
|
||||
This General Public License does not permit incorporating your program into
|
||||
proprietary programs. If your program is a subroutine library, you may
|
||||
consider it more useful to permit linking proprietary applications with the
|
||||
library. If this is what you want to do, use the GNU Lesser General
|
||||
Public License instead of this License.
|
|
@ -0,0 +1,641 @@
|
|||
#
|
||||
|
||||
mainmenu "Buildroot $BR2_VERSION Configuration"
|
||||
|
||||
config BR2_HAVE_DOT_CONFIG
|
||||
bool
|
||||
default y
|
||||
|
||||
config BR2_VERSION
|
||||
string
|
||||
option env="BR2_VERSION_FULL"
|
||||
|
||||
config BR2_HOSTARCH
|
||||
string
|
||||
option env="HOSTARCH"
|
||||
|
||||
config BR2_EXTERNAL
|
||||
string
|
||||
option env="BR2_EXTERNAL"
|
||||
|
||||
# Hidden boolean selected by packages in need of Java in order to build
|
||||
# (example: xbmc)
|
||||
config BR2_NEEDS_HOST_JAVA
|
||||
bool
|
||||
|
||||
# Hidden boolean selected by packages in need of javac in order to build
|
||||
# (example: classpath)
|
||||
config BR2_NEEDS_HOST_JAVAC
|
||||
bool
|
||||
|
||||
# Hidden boolean selected by packages in need of jar in order to build
|
||||
# (example: classpath)
|
||||
config BR2_NEEDS_HOST_JAR
|
||||
bool
|
||||
|
||||
# Hidden boolean selected by pre-built packages for x86, when they
|
||||
# need to run on x86-64 machines (example: pre-built external
|
||||
# toolchains, binary tools like SAM-BA, etc.).
|
||||
config BR2_HOSTARCH_NEEDS_IA32_LIBS
|
||||
bool
|
||||
|
||||
# Hidden boolean selected by packages that need to build 32 bits
|
||||
# binaries with the host compiler, even on 64 bits build machines (e.g
|
||||
# bootloaders).
|
||||
config BR2_HOSTARCH_NEEDS_IA32_COMPILER
|
||||
bool
|
||||
|
||||
source "arch/Config.in"
|
||||
|
||||
menu "Build options"
|
||||
|
||||
menu "Commands"
|
||||
|
||||
config BR2_WGET
|
||||
string "Wget command"
|
||||
default "wget --passive-ftp -nd -t 3"
|
||||
|
||||
config BR2_SVN
|
||||
string "Subversion (svn) command"
|
||||
default "svn"
|
||||
|
||||
config BR2_BZR
|
||||
string "Bazaar (bzr) command"
|
||||
default "bzr"
|
||||
|
||||
config BR2_GIT
|
||||
string "Git command"
|
||||
default "git"
|
||||
|
||||
config BR2_CVS
|
||||
string "CVS command"
|
||||
default "cvs"
|
||||
|
||||
config BR2_LOCALFILES
|
||||
string "Local files retrieval command"
|
||||
default "cp"
|
||||
|
||||
config BR2_SCP
|
||||
string "Secure copy (scp) command"
|
||||
default "scp"
|
||||
|
||||
config BR2_SSH
|
||||
string "Secure shell (ssh) command"
|
||||
default "ssh"
|
||||
|
||||
config BR2_HG
|
||||
string "Mercurial (hg) command"
|
||||
default "hg"
|
||||
|
||||
config BR2_ZCAT
|
||||
string "zcat command"
|
||||
default "gzip -d -c"
|
||||
help
|
||||
Command to be used to extract a gzip'ed file to stdout.
|
||||
zcat is identical to gunzip -c except that the former may
|
||||
not be available on your system.
|
||||
Default is "gzip -d -c"
|
||||
Other possible values include "gunzip -c" or "zcat".
|
||||
|
||||
config BR2_BZCAT
|
||||
string "bzcat command"
|
||||
default "bzcat"
|
||||
help
|
||||
Command to be used to extract a bzip2'ed file to stdout.
|
||||
bzcat is identical to bunzip2 -c except that the former may
|
||||
not be available on your system.
|
||||
Default is "bzcat"
|
||||
Other possible values include "bunzip2 -c" or "bzip2 -d -c".
|
||||
|
||||
config BR2_XZCAT
|
||||
string "xzcat command"
|
||||
default "xzcat"
|
||||
help
|
||||
Command to be used to extract a xz'ed file to stdout.
|
||||
Default is "xzcat"
|
||||
|
||||
config BR2_TAR_OPTIONS
|
||||
string "Tar options"
|
||||
default ""
|
||||
help
|
||||
Options to pass to tar when extracting the sources.
|
||||
E.g. " -v --exclude='*.svn*'" to exclude all .svn internal files
|
||||
and to be verbose.
|
||||
|
||||
endmenu
|
||||
|
||||
config BR2_DEFCONFIG_FROM_ENV
|
||||
string
|
||||
option env="BR2_DEFCONFIG"
|
||||
|
||||
config BR2_DEFCONFIG
|
||||
string "Location to save buildroot config"
|
||||
default BR2_DEFCONFIG_FROM_ENV if BR2_DEFCONFIG_FROM_ENV != ""
|
||||
default "$(CONFIG_DIR)/defconfig"
|
||||
help
|
||||
When running 'make savedefconfig', the defconfig file will be saved
|
||||
in this location.
|
||||
|
||||
config BR2_DL_DIR
|
||||
string "Download dir"
|
||||
default "$(TOPDIR)/dl"
|
||||
help
|
||||
Directory to store all the source files that we need to fetch.
|
||||
If the Linux shell environment has defined the BR2_DL_DIR
|
||||
environment variable, then this overrides this configuration item.
|
||||
|
||||
The default is $(TOPDIR)/dl
|
||||
|
||||
config BR2_HOST_DIR
|
||||
string "Host dir"
|
||||
default "$(BASE_DIR)/host"
|
||||
help
|
||||
Directory to store all the binary files that are built for the host.
|
||||
This includes the cross compilation toolchain when building the
|
||||
internal buildroot toolchain.
|
||||
|
||||
The default is $(BASE_DIR)/host
|
||||
|
||||
menu "Mirrors and Download locations"
|
||||
|
||||
config BR2_PRIMARY_SITE
|
||||
string "Primary download site"
|
||||
default ""
|
||||
help
|
||||
Primary site to download from. If this option is set then buildroot
|
||||
will try to download package source first from this site and try the
|
||||
default if the file is not found.
|
||||
Valid URIs are URIs recognized by $(WGET) and scp URIs of the form
|
||||
scp://[user@]host:path.
|
||||
NOTE: This works for all packages using the central package
|
||||
infrastructure (generic, autotools, cmake, ...)
|
||||
|
||||
config BR2_PRIMARY_SITE_ONLY
|
||||
bool "Only allow downloads from primary download site"
|
||||
depends on BR2_PRIMARY_SITE != ""
|
||||
help
|
||||
If this option is enabled, downloads will only be attempted
|
||||
from the primary download site. Other locations, like the
|
||||
package's official download location or the backup download
|
||||
site, will not be considered. Therefore, if the package is
|
||||
not present on the primary site, the download fails.
|
||||
|
||||
This is useful for project developers who want to ensure
|
||||
that the project can be built even if the upstream tarball
|
||||
locations disappear.
|
||||
|
||||
if !BR2_PRIMARY_SITE_ONLY
|
||||
|
||||
config BR2_BACKUP_SITE
|
||||
string "Backup download site"
|
||||
default "http://sources.buildroot.net"
|
||||
help
|
||||
Backup site to download from. If this option is set then buildroot
|
||||
will fall back to download package sources from here if the
|
||||
normal location fails.
|
||||
|
||||
config BR2_KERNEL_MIRROR
|
||||
string "Kernel.org mirror"
|
||||
default "https://www.kernel.org/pub"
|
||||
help
|
||||
kernel.org is mirrored on a number of servers around the world.
|
||||
The following allows you to select your preferred mirror.
|
||||
|
||||
Have a look on the kernel.org site for a list of mirrors, then enter
|
||||
the URL to the base directory. Examples:
|
||||
|
||||
http://www.XX.kernel.org/pub (XX = country code)
|
||||
http://mirror.aarnet.edu.au/pub/ftp.kernel.org
|
||||
|
||||
config BR2_GNU_MIRROR
|
||||
string "GNU Software mirror"
|
||||
default "http://ftp.gnu.org/pub/gnu"
|
||||
help
|
||||
GNU has multiple software mirrors scattered around the world.
|
||||
The following allows you to select your preferred mirror.
|
||||
|
||||
Have a look on the gnu.org site for a list of mirrors, then enter
|
||||
the URL to the base directory. Examples:
|
||||
|
||||
http://ftp.gnu.org/pub/gnu
|
||||
http://mirror.aarnet.edu.au/pub/gnu
|
||||
|
||||
endif
|
||||
|
||||
config BR2_LUAROCKS_MIRROR
|
||||
string "LuaRocks mirror"
|
||||
default "http://rocks.moonscript.org"
|
||||
help
|
||||
LuaRocks repository.
|
||||
|
||||
See http://luarocks.org
|
||||
|
||||
config BR2_CPAN_MIRROR
|
||||
string "CPAN mirror (Perl packages)"
|
||||
default "http://cpan.metacpan.org"
|
||||
help
|
||||
CPAN (Comprehensive Perl Archive Network) is a repository
|
||||
of Perl packages. It has multiple software mirrors scattered
|
||||
around the world. This option allows you to select a mirror.
|
||||
|
||||
The list of mirrors is available at:
|
||||
http://search.cpan.org/mirror
|
||||
|
||||
endmenu
|
||||
|
||||
config BR2_JLEVEL
|
||||
int "Number of jobs to run simultaneously (0 for auto)"
|
||||
default "0"
|
||||
help
|
||||
Number of jobs to run simultaneously. If 0, determine
|
||||
automatically according to number of CPUs on the host
|
||||
system.
|
||||
|
||||
config BR2_CCACHE
|
||||
bool "Enable compiler cache"
|
||||
help
|
||||
This option will enable the use of ccache, a compiler
|
||||
cache. It will cache the result of previous builds to speed
|
||||
up future builds. By default, the cache is stored in
|
||||
$HOME/.buildroot-ccache.
|
||||
|
||||
Note that Buildroot does not try to invalidate the cache
|
||||
contents when the compiler changes in an incompatible
|
||||
way. Therefore, if you make a change to the compiler version
|
||||
and/or configuration, you are responsible for purging the
|
||||
ccache cache by removing the $HOME/.buildroot-ccache
|
||||
directory.
|
||||
|
||||
if BR2_CCACHE
|
||||
|
||||
config BR2_CCACHE_DIR
|
||||
string "Compiler cache location"
|
||||
default "$(HOME)/.buildroot-ccache"
|
||||
help
|
||||
Where ccache should store cached files.
|
||||
|
||||
config BR2_CCACHE_INITIAL_SETUP
|
||||
string "Compiler cache initial setup"
|
||||
help
|
||||
Initial ccache settings to apply, such as --max-files or --max-size.
|
||||
|
||||
For example, if your project is known to require more space than the
|
||||
default max cache size, then you might want to increase the cache size
|
||||
to a suitable amount using the -M (--max-size) option.
|
||||
|
||||
The string you specify here is passed verbatim to ccache. Refer to
|
||||
ccache documentation for more details.
|
||||
|
||||
These initial settings are applied after ccache has been compiled.
|
||||
|
||||
endif
|
||||
|
||||
config BR2_DEPRECATED
|
||||
bool "Show options and packages that are deprecated or obsolete"
|
||||
help
|
||||
This option shows outdated/obsolete versions of packages and
|
||||
options that are otherwise hidden.
|
||||
|
||||
if BR2_DEPRECATED
|
||||
|
||||
config BR2_DEPRECATED_SINCE_2014_02
|
||||
bool
|
||||
default y
|
||||
|
||||
config BR2_DEPRECATED_SINCE_2014_05
|
||||
bool
|
||||
default y
|
||||
|
||||
config BR2_DEPRECATED_SINCE_2014_08
|
||||
bool
|
||||
default y
|
||||
|
||||
config BR2_DEPRECATED_SINCE_2015_02
|
||||
bool
|
||||
default y
|
||||
|
||||
endif
|
||||
|
||||
config BR2_ENABLE_DEBUG
|
||||
bool "build packages with debugging symbols"
|
||||
help
|
||||
Build packages with debugging symbols enabled. All libraries
|
||||
and binaries in the 'staging' directory will have debugging
|
||||
symbols, which allows remote debugging even if libraries and
|
||||
binaries are stripped on the target. Whether libraries and
|
||||
binaries are stripped on the target is controlled by the
|
||||
BR2_STRIP_* options below.
|
||||
|
||||
if BR2_ENABLE_DEBUG
|
||||
choice
|
||||
prompt "gcc debug level"
|
||||
default BR2_DEBUG_2
|
||||
help
|
||||
Set the debug level for gcc
|
||||
|
||||
config BR2_DEBUG_1
|
||||
bool "debug level 1"
|
||||
help
|
||||
Debug level 1 produces minimal information, enough
|
||||
for making backtraces in parts of the program that
|
||||
you don't plan to debug. This includes descriptions
|
||||
of functions and external variables, but no information
|
||||
about local variables and no line numbers.
|
||||
|
||||
config BR2_DEBUG_2
|
||||
bool "debug level 2"
|
||||
help
|
||||
The default gcc debug level is 2
|
||||
|
||||
config BR2_DEBUG_3
|
||||
bool "debug level 3"
|
||||
help
|
||||
Level 3 includes extra information, such as all the
|
||||
macro definitions present in the program. Some debuggers
|
||||
support macro expansion when you use -g3.
|
||||
endchoice
|
||||
endif
|
||||
|
||||
choice
|
||||
prompt "strip command for binaries on target"
|
||||
default BR2_STRIP_strip
|
||||
|
||||
config BR2_STRIP_strip
|
||||
bool "strip"
|
||||
depends on !BR2_PACKAGE_HOST_ELF2FLT
|
||||
help
|
||||
Binaries and libraries in the target filesystem will be
|
||||
stripped using the normal 'strip' command. This allows to
|
||||
save space, mainly by removing debugging symbols. Debugging
|
||||
symbols on the target are needed for native debugging, but
|
||||
not when remote debugging is used.
|
||||
|
||||
config BR2_STRIP_sstrip
|
||||
bool "sstrip"
|
||||
select BR2_PACKAGE_SSTRIP_HOST
|
||||
depends on !BR2_PACKAGE_HOST_ELF2FLT
|
||||
depends on BR2_DEPRECATED_SINCE_2014_05
|
||||
help
|
||||
Binaries and libraries in the target filesystem will be
|
||||
stripped using the 'sstrip' command, which strips a little
|
||||
bit more than the traditional 'strip' command. This allows to
|
||||
save space, mainly by removing debugging symbols. Debugging
|
||||
symbols on the target are needed for native debugging, but
|
||||
not when remote debugging is used.
|
||||
|
||||
config BR2_STRIP_none
|
||||
bool "none"
|
||||
help
|
||||
Do not strip binaries and libraries in the target
|
||||
filesystem.
|
||||
endchoice
|
||||
|
||||
config BR2_STRIP_EXCLUDE_FILES
|
||||
string "executables that should not be stripped"
|
||||
depends on !BR2_STRIP_none
|
||||
default ""
|
||||
help
|
||||
You may specify a space-separated list of binaries and libraries
|
||||
here that should not be stripped on the target.
|
||||
|
||||
config BR2_STRIP_EXCLUDE_DIRS
|
||||
string "directories that should be skipped when stripping"
|
||||
depends on !BR2_STRIP_none
|
||||
default ""
|
||||
help
|
||||
You may specify a space-separated list of directories that should
|
||||
be skipped when stripping. Binaries and libraries in these
|
||||
directories will not be touched.
|
||||
The directories should be specified relative to the target directory,
|
||||
without leading slash.
|
||||
|
||||
choice
|
||||
prompt "gcc optimization level"
|
||||
default BR2_OPTIMIZE_S
|
||||
help
|
||||
Set the optimization level for gcc
|
||||
|
||||
config BR2_OPTIMIZE_0
|
||||
bool "optimization level 0"
|
||||
help
|
||||
Do not optimize. This is the default.
|
||||
|
||||
config BR2_OPTIMIZE_1
|
||||
bool "optimization level 1"
|
||||
help
|
||||
Optimize. Optimizing compilation takes somewhat more time,
|
||||
and a lot more memory for a large function. With -O, the
|
||||
compiler tries to reduce code size and execution time,
|
||||
without performing any optimizations that take a great deal
|
||||
of compilation time. -O turns on the following optimization
|
||||
flags: -fdefer-pop -fdelayed-branch -fguess-branch-probability
|
||||
-fcprop-registers -floop-optimize -fif-conversion
|
||||
-fif-conversion2 -ftree-ccp -ftree-dce -ftree-dominator-opts
|
||||
-ftree-dse -ftree-ter -ftree-lrs -ftree-sra -ftree-copyrename
|
||||
-ftree-fre -ftree-ch -funit-at-a-time -fmerge-constants
|
||||
-O also turns on -fomit-frame-pointer on machines where doing
|
||||
so does not interfere with debugging.
|
||||
|
||||
config BR2_OPTIMIZE_2
|
||||
bool "optimization level 2"
|
||||
help
|
||||
Optimize even more. GCC performs nearly all supported optimizations
|
||||
that do not involve a space-speed tradeoff. The compiler does not
|
||||
perform loop unrolling or function inlining when you specify -O2.
|
||||
As compared to -O, this option increases both compilation time and
|
||||
the performance of the generated code. -O2 turns on all optimization
|
||||
flags specified by -O. It also turns on the following optimization
|
||||
flags: -fthread-jumps -fcrossjumping -foptimize-sibling-calls
|
||||
-fcse-follow-jumps -fcse-skip-blocks -fgcse -fgcse-lm
|
||||
-fexpensive-optimizations -fstrength-reduce -frerun-cse-after-loop
|
||||
-frerun-loop-opt -fcaller-saves -fpeephole2 -fschedule-insns
|
||||
-fschedule-insns2 -fsched-interblock -fsched-spec -fregmove
|
||||
-fstrict-aliasing -fdelete-null-pointer-checks -freorder-blocks
|
||||
-freorder-functions -falign-functions -falign-jumps -falign-loops
|
||||
-falign-labels -ftree-vrp -ftree-pre
|
||||
Please note the warning under -fgcse about invoking -O2 on programs
|
||||
that use computed gotos.
|
||||
|
||||
config BR2_OPTIMIZE_3
|
||||
bool "optimization level 3"
|
||||
help
|
||||
Optimize yet more. -O3 turns on all optimizations specified by -O2
|
||||
and also turns on the -finline-functions, -funswitch-loops and
|
||||
-fgcse-after-reload options.
|
||||
|
||||
config BR2_OPTIMIZE_S
|
||||
bool "optimize for size"
|
||||
help
|
||||
Optimize for size. -Os enables all -O2 optimizations that do not
|
||||
typically increase code size. It also performs further optimizations
|
||||
designed to reduce code size. -Os disables the following optimization
|
||||
flags: -falign-functions -falign-jumps -falign-loops -falign-labels
|
||||
-freorder-blocks -freorder-blocks-and-partition -fprefetch-loop-arrays
|
||||
-ftree-vect-loop-version
|
||||
|
||||
endchoice
|
||||
|
||||
config BR2_GOOGLE_BREAKPAD_ENABLE
|
||||
bool "Enable google-breakpad support"
|
||||
select BR2_PACKAGE_GOOGLE_BREAKPAD
|
||||
depends on BR2_INSTALL_LIBSTDCPP
|
||||
depends on BR2_TOOLCHAIN_USES_GLIBC
|
||||
depends on BR2_PACKAGE_GOOGLE_BREAKPAD_ARCH_SUPPORTS
|
||||
help
|
||||
This option will enable the use of google breakpad, a
|
||||
library and tool suite that allows you to distribute an
|
||||
application to users with compiler-provided debugging
|
||||
information removed, record crashes in compact "minidump"
|
||||
files, send them back to your server and produce C and C++
|
||||
stack traces from these minidumps. Breakpad can also write
|
||||
minidumps on request for programs that have not crashed.
|
||||
|
||||
if BR2_GOOGLE_BREAKPAD_ENABLE
|
||||
|
||||
config BR2_GOOGLE_BREAKPAD_INCLUDE_FILES
|
||||
string "List of executables and libraries to extract symbols from"
|
||||
default ""
|
||||
help
|
||||
You may specify a space-separated list of binaries and
|
||||
libraries with full paths relative to $(TARGET_DIR) of which
|
||||
debug symbols will be dumped for further use with google
|
||||
breakpad.
|
||||
|
||||
A directory structure that can be used by minidump-stackwalk
|
||||
will be created at:
|
||||
|
||||
$(STAGING_DIR)/usr/share/google-breakpad-symbols
|
||||
|
||||
endif
|
||||
|
||||
config BR2_ENABLE_SSP
|
||||
bool "build code with Stack Smashing Protection"
|
||||
depends on BR2_TOOLCHAIN_HAS_SSP
|
||||
help
|
||||
Enable stack smashing protection support using GCCs
|
||||
-fstack-protector-all option.
|
||||
|
||||
See http://www.linuxfromscratch.org/hints/downloads/files/ssp.txt
|
||||
for details.
|
||||
|
||||
Note that this requires the toolchain to have SSP
|
||||
support. This is always the case for glibc and eglibc
|
||||
toolchain, but is optional in uClibc toolchains.
|
||||
|
||||
comment "enabling Stack Smashing Protection requires support in the toolchain"
|
||||
depends on !BR2_TOOLCHAIN_HAS_SSP
|
||||
|
||||
choice
|
||||
bool "libraries"
|
||||
default BR2_SHARED_LIBS if BR2_BINFMT_SUPPORTS_SHARED
|
||||
default BR2_STATIC_LIBS if !BR2_BINFMT_SUPPORTS_SHARED
|
||||
help
|
||||
Select the type of libraries you want to use on the target.
|
||||
|
||||
The default is to build dynamic libraries and use those on
|
||||
the target filesystem, except when the architecture and/or
|
||||
the selected binary format does not support shared
|
||||
libraries.
|
||||
|
||||
config BR2_STATIC_LIBS
|
||||
bool "static only"
|
||||
help
|
||||
Build and use only static libraries. No shared libraries
|
||||
will be instaled on the target. This potentially increases
|
||||
your code size and should only be used if you know what you
|
||||
are doing. Note that some packages may not be available when
|
||||
this option is enabled, due to their need for dynamic
|
||||
library support.
|
||||
|
||||
config BR2_SHARED_LIBS
|
||||
bool "shared only"
|
||||
depends on BR2_BINFMT_SUPPORTS_SHARED
|
||||
help
|
||||
Build and use only shared libraries. This is the recommended
|
||||
solution as it saves space and build time.
|
||||
|
||||
config BR2_SHARED_STATIC_LIBS
|
||||
bool "both static and shared"
|
||||
depends on BR2_BINFMT_SUPPORTS_SHARED
|
||||
help
|
||||
Build both shared and static libraries, but link executables
|
||||
dynamically. While building both shared and static libraries
|
||||
take more time and more disk space, having static libraries
|
||||
may be useful to link some of the applications statically.
|
||||
|
||||
endchoice
|
||||
|
||||
|
||||
config BR2_PACKAGE_OVERRIDE_FILE
|
||||
string "location of a package override file"
|
||||
default "$(CONFIG_DIR)/local.mk"
|
||||
help
|
||||
A package override file is a short makefile that contains
|
||||
variable definitions of the form <pkg>_OVERRIDE_SRCDIR,
|
||||
which allows to tell Buildroot to use an existing directory
|
||||
as the source directory for a particular package. See the
|
||||
Buildroot documentation for more details on this feature.
|
||||
|
||||
config BR2_GLOBAL_PATCH_DIR
|
||||
string "global patch directories"
|
||||
help
|
||||
You may specify a space separated list of one or more directories
|
||||
containing global package patches. For a specific version
|
||||
<packageversion> of a specific package <packagename>, patches are
|
||||
applied as follows:
|
||||
|
||||
First, the default Buildroot patch set for the package is applied
|
||||
from the package's directory in Buildroot.
|
||||
|
||||
Then for every directory - <global-patch-dir> - that exists in
|
||||
BR2_GLOBAL_PATCH_DIR, if the directory
|
||||
<global-patch-dir>/<packagename>/<packageversion>/ exists, then all
|
||||
*.patch files in this directory will be applied.
|
||||
|
||||
Otherwise, if the directory <global-patch-dir>/<packagename> exists,
|
||||
then all *.patch files in the directory will be applied.
|
||||
|
||||
menu "Advanced"
|
||||
|
||||
config BR2_COMPILER_PARANOID_UNSAFE_PATH
|
||||
bool "paranoid check of library/header paths"
|
||||
help
|
||||
By default, when this option is disabled, when the Buildroot
|
||||
cross-compiler will encounter an unsafe library or header
|
||||
path (such as /usr/include, or /usr/lib), the compiler will
|
||||
display a warning.
|
||||
|
||||
By enabling this option, this warning is turned into an
|
||||
error, which will completely abort the build when such
|
||||
unsafe paths are encountered.
|
||||
|
||||
Note that this mechanism is available for both the internal
|
||||
toolchain (through gcc and binutils patches) and external
|
||||
toolchain backends (through the external toolchain wrapper).
|
||||
|
||||
endmenu
|
||||
|
||||
endmenu
|
||||
|
||||
source "toolchain/Config.in"
|
||||
|
||||
source "system/Config.in"
|
||||
|
||||
source "linux/Config.in"
|
||||
|
||||
source "package/Config.in"
|
||||
|
||||
source "fs/Config.in"
|
||||
|
||||
source "boot/Config.in"
|
||||
|
||||
source "package/Config.in.host"
|
||||
|
||||
source "Config.in.legacy"
|
||||
|
||||
menu "User-provided options"
|
||||
depends on BR2_EXTERNAL != "support/dummy-external"
|
||||
|
||||
source "$BR2_EXTERNAL/Config.in"
|
||||
|
||||
endmenu
|
File diff suppressed because it is too large
Load Diff
|
@ -0,0 +1,934 @@
|
|||
# Makefile for buildroot
|
||||
#
|
||||
# Copyright (C) 1999-2005 by Erik Andersen <andersen@codepoet.org>
|
||||
# Copyright (C) 2006-2014 by the Buildroot developers <buildroot@uclibc.org>
|
||||
# Copyright (C) 2014 by the Buildroot developers <buildroot@buildroot.org>
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or modify
|
||||
# it under the terms of the GNU General Public License as published by
|
||||
# the Free Software Foundation; either version 2 of the License, or
|
||||
# (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
# General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
#
|
||||
|
||||
#--------------------------------------------------------------
|
||||
# Just run 'make menuconfig', configure stuff, then run 'make'.
|
||||
# You shouldn't need to mess with anything beyond this point...
|
||||
#--------------------------------------------------------------
|
||||
|
||||
# This is our default rule, so must come first
|
||||
all:
|
||||
|
||||
# Set and export the version string
|
||||
export BR2_VERSION := 2015.02-git
|
||||
|
||||
# Check for minimal make version (note: this check will break at make 10.x)
|
||||
MIN_MAKE_VERSION = 3.81
|
||||
ifneq ($(firstword $(sort $(MAKE_VERSION) $(MIN_MAKE_VERSION))),$(MIN_MAKE_VERSION))
|
||||
$(error You have make '$(MAKE_VERSION)' installed. GNU make >= $(MIN_MAKE_VERSION) is required)
|
||||
endif
|
||||
|
||||
export HOSTARCH := $(shell uname -m | \
|
||||
sed -e s/i.86/x86/ \
|
||||
-e s/sun4u/sparc64/ \
|
||||
-e s/arm.*/arm/ \
|
||||
-e s/sa110/arm/ \
|
||||
-e s/ppc64/powerpc64/ \
|
||||
-e s/ppc/powerpc/ \
|
||||
-e s/macppc/powerpc/\
|
||||
-e s/sh.*/sh/)
|
||||
|
||||
# Parallel execution of this Makefile is disabled because it changes
|
||||
# the packages building order, that can be a problem for two reasons:
|
||||
# - If a package has an unspecified optional dependency and that
|
||||
# dependency is present when the package is built, it is used,
|
||||
# otherwise it isn't (but compilation happily proceeds) so the end
|
||||
# result will differ if the order is swapped due to parallel
|
||||
# building.
|
||||
# - Also changing the building order can be a problem if two packages
|
||||
# manipulate the same file in the target directory.
|
||||
#
|
||||
# Taking into account the above considerations, if you still want to execute
|
||||
# this top-level Makefile in parallel comment the ".NOTPARALLEL" line and
|
||||
# build using the following command:
|
||||
# make BR2_JLEVEL= -j$((`getconf _NPROCESSORS_ONLN`+1))
|
||||
.NOTPARALLEL:
|
||||
|
||||
# absolute path
|
||||
TOPDIR := $(shell pwd)
|
||||
CONFIG_CONFIG_IN = Config.in
|
||||
CONFIG = support/kconfig
|
||||
DATE := $(shell date +%Y%m%d)
|
||||
|
||||
# Compute the full local version string so packages can use it as-is
|
||||
# Need to export it, so it can be got from environment in children (eg. mconf)
|
||||
export BR2_VERSION_FULL := $(BR2_VERSION)$(shell $(TOPDIR)/support/scripts/setlocalversion)
|
||||
|
||||
noconfig_targets := menuconfig nconfig gconfig xconfig config oldconfig randconfig \
|
||||
defconfig %_defconfig allyesconfig allnoconfig silentoldconfig release \
|
||||
randpackageconfig allyespackageconfig allnopackageconfig \
|
||||
source-check print-version olddefconfig
|
||||
|
||||
# Strip quotes and then whitespaces
|
||||
qstrip = $(strip $(subst ",,$(1)))
|
||||
#"))
|
||||
|
||||
# Variables for use in Make constructs
|
||||
comma := ,
|
||||
empty :=
|
||||
space := $(empty) $(empty)
|
||||
|
||||
ifneq ("$(origin O)", "command line")
|
||||
O := output
|
||||
CONFIG_DIR := $(TOPDIR)
|
||||
NEED_WRAPPER =
|
||||
else
|
||||
# other packages might also support Linux-style out of tree builds
|
||||
# with the O=<dir> syntax (E.G. BusyBox does). As make automatically
|
||||
# forwards command line variable definitions those packages get very
|
||||
# confused. Fix this by telling make to not do so
|
||||
MAKEOVERRIDES =
|
||||
# strangely enough O is still passed to submakes with MAKEOVERRIDES
|
||||
# (with make 3.81 atleast), the only thing that changes is the output
|
||||
# of the origin function (command line -> environment).
|
||||
# Unfortunately some packages don't look at origin (E.G. uClibc 0.9.31+)
|
||||
# To really make O go away, we have to override it.
|
||||
override O := $(O)
|
||||
CONFIG_DIR := $(O)
|
||||
# we need to pass O= everywhere we call back into the toplevel makefile
|
||||
EXTRAMAKEARGS = O=$(O)
|
||||
NEED_WRAPPER = y
|
||||
endif
|
||||
|
||||
# bash prints the name of the directory on 'cd <dir>' if CDPATH is
|
||||
# set, so unset it here to not cause problems. Notice that the export
|
||||
# line doesn't affect the environment of $(shell ..) calls, so
|
||||
# explictly throw away any output from 'cd' here.
|
||||
export CDPATH :=
|
||||
BASE_DIR := $(shell mkdir -p $(O) && cd $(O) >/dev/null && pwd)
|
||||
$(if $(BASE_DIR),, $(error output directory "$(O)" does not exist))
|
||||
|
||||
|
||||
# Handling of BR2_EXTERNAL.
|
||||
#
|
||||
# The value of BR2_EXTERNAL is stored in .br-external in the output directory.
|
||||
# On subsequent invocations of make, it is read in. It can still be overridden
|
||||
# on the command line, therefore the file is re-created every time make is run.
|
||||
#
|
||||
# When BR2_EXTERNAL is not set, the .br-external file is removed and we point
|
||||
# to support/dummy-external. This makes sure we can unconditionally include the
|
||||
# Config.in and external.mk from the BR2_EXTERNAL directory. In this case,
|
||||
# override is necessary so the user can clear BR2_EXTERNAL from the command
|
||||
# line, but the dummy path is still used internally.
|
||||
|
||||
BR2_EXTERNAL_FILE = $(BASE_DIR)/.br-external
|
||||
-include $(BR2_EXTERNAL_FILE)
|
||||
ifeq ($(BR2_EXTERNAL),)
|
||||
override BR2_EXTERNAL = support/dummy-external
|
||||
$(shell rm -f $(BR2_EXTERNAL_FILE))
|
||||
else
|
||||
_BR2_EXTERNAL = $(shell cd $(BR2_EXTERNAL) >/dev/null 2>&1 && pwd)
|
||||
ifeq ($(_BR2_EXTERNAL),)
|
||||
$(error BR2_EXTERNAL='$(BR2_EXTERNAL)' does not exist, relative to $(TOPDIR))
|
||||
endif
|
||||
override BR2_EXTERNAL := $(_BR2_EXTERNAL)
|
||||
$(shell echo BR2_EXTERNAL ?= $(BR2_EXTERNAL) > $(BR2_EXTERNAL_FILE))
|
||||
endif
|
||||
|
||||
# To make sure the the environment variable overrides the .config option,
|
||||
# set this before including .config.
|
||||
ifneq ($(BR2_DL_DIR),)
|
||||
DL_DIR := $(BR2_DL_DIR)
|
||||
endif
|
||||
|
||||
|
||||
# Need that early, before we scan packages
|
||||
# Avoids doing the $(or...) everytime
|
||||
BR_GRAPH_OUT := $(or $(BR2_GRAPH_OUT),pdf)
|
||||
|
||||
BUILD_DIR := $(BASE_DIR)/build
|
||||
BINARIES_DIR := $(BASE_DIR)/images
|
||||
TARGET_DIR := $(BASE_DIR)/target
|
||||
# initial definition so that 'make clean' works for most users, even without
|
||||
# .config. HOST_DIR will be overwritten later when .config is included.
|
||||
HOST_DIR := $(BASE_DIR)/host
|
||||
|
||||
LEGAL_INFO_DIR = $(BASE_DIR)/legal-info
|
||||
REDIST_SOURCES_DIR_TARGET = $(LEGAL_INFO_DIR)/sources
|
||||
REDIST_SOURCES_DIR_HOST = $(LEGAL_INFO_DIR)/host-sources
|
||||
LICENSE_FILES_DIR_TARGET = $(LEGAL_INFO_DIR)/licenses
|
||||
LICENSE_FILES_DIR_HOST = $(LEGAL_INFO_DIR)/host-licenses
|
||||
LEGAL_MANIFEST_CSV_TARGET = $(LEGAL_INFO_DIR)/manifest.csv
|
||||
LEGAL_MANIFEST_CSV_HOST = $(LEGAL_INFO_DIR)/host-manifest.csv
|
||||
LEGAL_LICENSES_TXT_TARGET = $(LEGAL_INFO_DIR)/licenses.txt
|
||||
LEGAL_LICENSES_TXT_HOST = $(LEGAL_INFO_DIR)/host-licenses.txt
|
||||
LEGAL_WARNINGS = $(LEGAL_INFO_DIR)/.warnings
|
||||
LEGAL_REPORT = $(LEGAL_INFO_DIR)/README
|
||||
|
||||
BR2_CONFIG = $(CONFIG_DIR)/.config
|
||||
|
||||
# Pull in the user's configuration file
|
||||
ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
|
||||
-include $(BR2_CONFIG)
|
||||
endif
|
||||
|
||||
# To put more focus on warnings, be less verbose as default
|
||||
# Use 'make V=1' to see the full commands
|
||||
ifdef V
|
||||
ifeq ("$(origin V)", "command line")
|
||||
KBUILD_VERBOSE = $(V)
|
||||
endif
|
||||
endif
|
||||
ifndef KBUILD_VERBOSE
|
||||
KBUILD_VERBOSE = 0
|
||||
endif
|
||||
|
||||
ifeq ($(KBUILD_VERBOSE),1)
|
||||
quiet =
|
||||
Q =
|
||||
ifndef VERBOSE
|
||||
VERBOSE = 1
|
||||
endif
|
||||
else
|
||||
quiet = quiet_
|
||||
Q = @
|
||||
endif
|
||||
|
||||
# we want bash as shell
|
||||
SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
|
||||
else if [ -x /bin/bash ]; then echo /bin/bash; \
|
||||
else echo sh; fi; fi)
|
||||
|
||||
# kconfig uses CONFIG_SHELL
|
||||
CONFIG_SHELL := $(SHELL)
|
||||
|
||||
export SHELL CONFIG_SHELL quiet Q KBUILD_VERBOSE VERBOSE
|
||||
|
||||
ifndef HOSTAR
|
||||
HOSTAR := ar
|
||||
endif
|
||||
ifndef HOSTAS
|
||||
HOSTAS := as
|
||||
endif
|
||||
ifndef HOSTCC
|
||||
HOSTCC := gcc
|
||||
HOSTCC := $(shell which $(HOSTCC) || type -p $(HOSTCC) || echo gcc)
|
||||
endif
|
||||
HOSTCC_NOCCACHE := $(HOSTCC)
|
||||
ifndef HOSTCXX
|
||||
HOSTCXX := g++
|
||||
HOSTCXX := $(shell which $(HOSTCXX) || type -p $(HOSTCXX) || echo g++)
|
||||
endif
|
||||
HOSTCXX_NOCCACHE := $(HOSTCXX)
|
||||
ifndef HOSTFC
|
||||
HOSTFC := gfortran
|
||||
endif
|
||||
ifndef HOSTCPP
|
||||
HOSTCPP := cpp
|
||||
endif
|
||||
ifndef HOSTLD
|
||||
HOSTLD := ld
|
||||
endif
|
||||
ifndef HOSTLN
|
||||
HOSTLN := ln
|
||||
endif
|
||||
ifndef HOSTNM
|
||||
HOSTNM := nm
|
||||
endif
|
||||
ifndef HOSTOBJCOPY
|
||||
HOSTOBJCOPY := objcopy
|
||||
endif
|
||||
ifndef HOSTRANLIB
|
||||
HOSTRANLIB := ranlib
|
||||
endif
|
||||
HOSTAR := $(shell which $(HOSTAR) || type -p $(HOSTAR) || echo ar)
|
||||
HOSTAS := $(shell which $(HOSTAS) || type -p $(HOSTAS) || echo as)
|
||||
HOSTFC := $(shell which $(HOSTLD) || type -p $(HOSTLD) || echo || which g77 || type -p g77 || echo gfortran)
|
||||
HOSTCPP := $(shell which $(HOSTCPP) || type -p $(HOSTCPP) || echo cpp)
|
||||
HOSTLD := $(shell which $(HOSTLD) || type -p $(HOSTLD) || echo ld)
|
||||
HOSTLN := $(shell which $(HOSTLN) || type -p $(HOSTLN) || echo ln)
|
||||
HOSTNM := $(shell which $(HOSTNM) || type -p $(HOSTNM) || echo nm)
|
||||
HOSTOBJCOPY := $(shell which $(HOSTOBJCOPY) || type -p $(HOSTOBJCOPY) || echo objcopy)
|
||||
HOSTRANLIB := $(shell which $(HOSTRANLIB) || type -p $(HOSTRANLIB) || echo ranlib)
|
||||
|
||||
export HOSTAR HOSTAS HOSTCC HOSTCXX HOSTFC HOSTLD
|
||||
export HOSTCC_NOCCACHE HOSTCXX_NOCCACHE
|
||||
|
||||
# Make sure pkg-config doesn't look outside the buildroot tree
|
||||
unexport PKG_CONFIG_PATH
|
||||
unexport PKG_CONFIG_SYSROOT_DIR
|
||||
unexport PKG_CONFIG_LIBDIR
|
||||
|
||||
# Having DESTDIR set in the environment confuses the installation
|
||||
# steps of some packages.
|
||||
unexport DESTDIR
|
||||
|
||||
# Causes breakage with packages that needs host-ruby
|
||||
unexport RUBYOPT
|
||||
|
||||
include package/pkg-utils.mk
|
||||
include package/doc-asciidoc.mk
|
||||
|
||||
ifeq ($(BR2_HAVE_DOT_CONFIG),y)
|
||||
|
||||
################################################################################
|
||||
#
|
||||
# Hide troublesome environment variables from sub processes
|
||||
#
|
||||
################################################################################
|
||||
unexport CROSS_COMPILE
|
||||
unexport ARCH
|
||||
unexport CC
|
||||
unexport CXX
|
||||
unexport CPP
|
||||
unexport CFLAGS
|
||||
unexport CXXFLAGS
|
||||
unexport GREP_OPTIONS
|
||||
unexport TAR_OPTIONS
|
||||
unexport CONFIG_SITE
|
||||
unexport QMAKESPEC
|
||||
unexport TERMINFO
|
||||
unexport MACHINE
|
||||
|
||||
GNU_HOST_NAME := $(shell support/gnuconfig/config.guess)
|
||||
|
||||
TARGETS :=
|
||||
|
||||
# silent mode requested?
|
||||
QUIET := $(if $(findstring s,$(MAKEFLAGS)),-q)
|
||||
|
||||
# Strip off the annoying quoting
|
||||
ARCH := $(call qstrip,$(BR2_ARCH))
|
||||
|
||||
KERNEL_ARCH := $(shell echo "$(ARCH)" | sed -e "s/-.*//" \
|
||||
-e s/i.86/i386/ -e s/sun4u/sparc64/ \
|
||||
-e s/arcle/arc/ \
|
||||
-e s/arceb/arc/ \
|
||||
-e s/arm.*/arm/ -e s/sa110/arm/ \
|
||||
-e s/aarch64/arm64/ \
|
||||
-e s/bfin/blackfin/ \
|
||||
-e s/parisc64/parisc/ \
|
||||
-e s/powerpc64.*/powerpc/ \
|
||||
-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
|
||||
-e s/sh.*/sh/ \
|
||||
-e s/microblazeel/microblaze/)
|
||||
|
||||
ZCAT := $(call qstrip,$(BR2_ZCAT))
|
||||
BZCAT := $(call qstrip,$(BR2_BZCAT))
|
||||
XZCAT := $(call qstrip,$(BR2_XZCAT))
|
||||
TAR_OPTIONS = $(call qstrip,$(BR2_TAR_OPTIONS)) -xf
|
||||
|
||||
# packages compiled for the host go here
|
||||
HOST_DIR := $(call qstrip,$(BR2_HOST_DIR))
|
||||
|
||||
# Quotes are needed for spaces and all in the original PATH content.
|
||||
BR_PATH = "$(HOST_DIR)/bin:$(HOST_DIR)/sbin:$(HOST_DIR)/usr/bin:$(HOST_DIR)/usr/sbin:$(PATH)"
|
||||
|
||||
TARGET_SKELETON = $(TOPDIR)/system/skeleton
|
||||
|
||||
# Location of a file giving a big fat warning that output/target
|
||||
# should not be used as the root filesystem.
|
||||
TARGET_DIR_WARNING_FILE = $(TARGET_DIR)/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM
|
||||
|
||||
ifeq ($(BR2_CCACHE),y)
|
||||
CCACHE := $(HOST_DIR)/usr/bin/ccache
|
||||
BR_CACHE_DIR = $(call qstrip,$(BR2_CCACHE_DIR))
|
||||
export BR_CACHE_DIR
|
||||
HOSTCC := $(CCACHE) $(HOSTCC)
|
||||
HOSTCXX := $(CCACHE) $(HOSTCXX)
|
||||
endif
|
||||
|
||||
# Scripts in support/ or post-build scripts may need to reference
|
||||
# these locations, so export them so it is easier to use
|
||||
export BR2_CONFIG
|
||||
export TARGET_DIR
|
||||
export STAGING_DIR
|
||||
export HOST_DIR
|
||||
export BINARIES_DIR
|
||||
export BASE_DIR
|
||||
|
||||
################################################################################
|
||||
#
|
||||
# You should probably leave this stuff alone unless you know
|
||||
# what you are doing.
|
||||
#
|
||||
################################################################################
|
||||
|
||||
all: world
|
||||
|
||||
# Include legacy before the other things, because package .mk files
|
||||
# may rely on it.
|
||||
ifneq ($(BR2_DEPRECATED),y)
|
||||
include Makefile.legacy
|
||||
endif
|
||||
|
||||
include package/Makefile.in
|
||||
include support/dependencies/dependencies.mk
|
||||
|
||||
# We also need the various per-package makefiles, which also add
|
||||
# each selected package to TARGETS if that package was selected
|
||||
# in the .config file.
|
||||
include toolchain/*.mk
|
||||
include toolchain/*/*.mk
|
||||
|
||||
# Include the package override file if one has been provided in the
|
||||
# configuration.
|
||||
PACKAGE_OVERRIDE_FILE = $(call qstrip,$(BR2_PACKAGE_OVERRIDE_FILE))
|
||||
ifneq ($(PACKAGE_OVERRIDE_FILE),)
|
||||
-include $(PACKAGE_OVERRIDE_FILE)
|
||||
endif
|
||||
|
||||
include $(sort $(wildcard package/*/*.mk))
|
||||
|
||||
include boot/common.mk
|
||||
include linux/linux.mk
|
||||
include system/system.mk
|
||||
include fs/common.mk
|
||||
|
||||
include $(BR2_EXTERNAL)/external.mk
|
||||
|
||||
TARGETS_SOURCE := $(patsubst %,%-source,$(TARGETS))
|
||||
TARGETS_DIRCLEAN := $(patsubst %,%-dirclean,$(TARGETS))
|
||||
|
||||
# host-* dependencies have to be handled specially, as those aren't
|
||||
# visible in Kconfig and hence not added to a variable like TARGETS.
|
||||
# instead, find all the host-* targets listed in each <PKG>_DEPENDENCIES
|
||||
# variable for each enabled target.
|
||||
# Notice: this only works for newstyle gentargets/autotargets packages
|
||||
TARGETS_HOST_DEPS = $(sort $(filter host-%,$(foreach dep,\
|
||||
$(addsuffix _DEPENDENCIES,\
|
||||
$(call UPPERCASE,$(TARGETS) $(TARGETS_ROOTFS))),\
|
||||
$($(dep)))))
|
||||
# Host packages can in turn have their own dependencies. Likewise find
|
||||
# all the package names listed in the HOST_<PKG>_DEPENDENCIES for each
|
||||
# host package found above. Ideally this should be done recursively until
|
||||
# no more packages are found, but that's hard to do in make, so limit to
|
||||
# 1 level for now.
|
||||
HOST_DEPS = $(sort $(foreach dep,\
|
||||
$(addsuffix _DEPENDENCIES,$(call UPPERCASE,$(TARGETS_HOST_DEPS))),\
|
||||
$($(dep))))
|
||||
HOST_SOURCE += $(addsuffix -source,$(sort $(TARGETS_HOST_DEPS) $(HOST_DEPS)))
|
||||
|
||||
TARGETS_LEGAL_INFO := $(patsubst %,%-legal-info,\
|
||||
$(TARGETS) $(TARGETS_HOST_DEPS) $(HOST_DEPS))
|
||||
|
||||
dirs: $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
|
||||
$(HOST_DIR) $(BINARIES_DIR)
|
||||
|
||||
$(BUILD_DIR)/buildroot-config/auto.conf: $(BR2_CONFIG)
|
||||
$(MAKE1) $(EXTRAMAKEARGS) HOSTCC="$(HOSTCC_NOCCACHE)" HOSTCXX="$(HOSTCXX_NOCCACHE)" silentoldconfig
|
||||
|
||||
prepare: $(BUILD_DIR)/buildroot-config/auto.conf
|
||||
|
||||
world: target-post-image
|
||||
|
||||
.PHONY: all world toolchain dirs clean distclean source outputmakefile \
|
||||
legal-info legal-info-prepare legal-info-clean printvars \
|
||||
target-finalize target-post-image \
|
||||
$(TARGETS) $(TARGETS_ROOTFS) \
|
||||
$(TARGETS_DIRCLEAN) $(TARGETS_SOURCE) $(TARGETS_LEGAL_INFO) \
|
||||
$(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
|
||||
$(HOST_DIR) $(BINARIES_DIR)
|
||||
|
||||
################################################################################
|
||||
#
|
||||
# staging and target directories do NOT list these as
|
||||
# dependencies anywhere else
|
||||
#
|
||||
################################################################################
|
||||
$(BUILD_DIR) $(HOST_DIR) $(BINARIES_DIR) $(LEGAL_INFO_DIR) $(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST):
|
||||
@mkdir -p $@
|
||||
|
||||
# We make a symlink lib32->lib or lib64->lib as appropriate
|
||||
# MIPS64/n32 requires lib32 even though it's a 64-bit arch.
|
||||
ifeq ($(BR2_ARCH_IS_64)$(BR2_MIPS_NABI32),y)
|
||||
LIB_SYMLINK = lib64
|
||||
else
|
||||
LIB_SYMLINK = lib32
|
||||
endif
|
||||
|
||||
$(STAGING_DIR):
|
||||
@mkdir -p $(STAGING_DIR)/bin
|
||||
@mkdir -p $(STAGING_DIR)/lib
|
||||
@ln -snf lib $(STAGING_DIR)/$(LIB_SYMLINK)
|
||||
@mkdir -p $(STAGING_DIR)/usr/lib
|
||||
@ln -snf lib $(STAGING_DIR)/usr/$(LIB_SYMLINK)
|
||||
@mkdir -p $(STAGING_DIR)/usr/include
|
||||
@mkdir -p $(STAGING_DIR)/usr/bin
|
||||
@ln -snf $(STAGING_DIR) $(BASE_DIR)/staging
|
||||
|
||||
ifeq ($(BR2_ROOTFS_SKELETON_CUSTOM),y)
|
||||
TARGET_SKELETON = $(BR2_ROOTFS_SKELETON_CUSTOM_PATH)
|
||||
endif
|
||||
|
||||
RSYNC_VCS_EXCLUSIONS = \
|
||||
--exclude .svn --exclude .git --exclude .hg --exclude .bzr \
|
||||
--exclude CVS
|
||||
|
||||
$(BUILD_DIR)/.root:
|
||||
mkdir -p $(TARGET_DIR)
|
||||
rsync -a --ignore-times $(RSYNC_VCS_EXCLUSIONS) \
|
||||
--chmod=Du+w --exclude .empty --exclude '*~' \
|
||||
$(TARGET_SKELETON)/ $(TARGET_DIR)/
|
||||
$(INSTALL) -m 0644 support/misc/target-dir-warning.txt $(TARGET_DIR_WARNING_FILE)
|
||||
@ln -snf lib $(TARGET_DIR)/$(LIB_SYMLINK)
|
||||
@mkdir -p $(TARGET_DIR)/usr
|
||||
@ln -snf lib $(TARGET_DIR)/usr/$(LIB_SYMLINK)
|
||||
touch $@
|
||||
|
||||
$(TARGET_DIR): $(BUILD_DIR)/.root
|
||||
|
||||
STRIP_FIND_CMD = find $(TARGET_DIR)
|
||||
ifneq (,$(call qstrip,$(BR2_STRIP_EXCLUDE_DIRS)))
|
||||
STRIP_FIND_CMD += \( $(call finddirclauses,$(TARGET_DIR),$(call qstrip,$(BR2_STRIP_EXCLUDE_DIRS))) \) -prune -o
|
||||
endif
|
||||
STRIP_FIND_CMD += -type f \( -perm /111 -o -name '*.so*' \)
|
||||
# file exclusions:
|
||||
# - libpthread.so: a non-stripped libpthread shared library is needed for
|
||||
# proper debugging of pthread programs using gdb.
|
||||
# - kernel modules (*.ko): do not function properly when stripped like normal
|
||||
# applications and libraries. Normally kernel modules are already excluded
|
||||
# by the executable permission check above, so the explicit exclusion is only
|
||||
# done for kernel modules with incorrect permissions.
|
||||
STRIP_FIND_CMD += -not \( $(call findfileclauses,libpthread*.so* *.ko $(call qstrip,$(BR2_STRIP_EXCLUDE_FILES))) \) -print
|
||||
|
||||
ifeq ($(BR2_ECLIPSE_REGISTER),y)
|
||||
define TOOLCHAIN_ECLIPSE_REGISTER
|
||||
./support/scripts/eclipse-register-toolchain `readlink -f $(O)` \
|
||||
$(notdir $(TARGET_CROSS)) $(BR2_ARCH)
|
||||
endef
|
||||
TARGET_FINALIZE_HOOKS += TOOLCHAIN_ECLIPSE_REGISTER
|
||||
endif
|
||||
|
||||
# Generate locale data. Basically, we call the localedef program
|
||||
# (built by the host-localedef package) for each locale. The input
|
||||
# data comes preferably from the toolchain, or if the toolchain does
|
||||
# not have them (Linaro toolchains), we use the ones available on the
|
||||
# host machine.
|
||||
ifeq ($(BR2_TOOLCHAIN_USES_GLIBC),y)
|
||||
GLIBC_GENERATE_LOCALES = $(call qstrip,$(BR2_GENERATE_LOCALE))
|
||||
ifneq ($(GLIBC_GENERATE_LOCALES),)
|
||||
TARGETS += host-localedef
|
||||
|
||||
define GENERATE_GLIBC_LOCALES
|
||||
$(Q)mkdir -p $(TARGET_DIR)/usr/lib/locale/
|
||||
$(Q)for locale in $(GLIBC_GENERATE_LOCALES) ; do \
|
||||
inputfile=`echo $${locale} | cut -f1 -d'.'` ; \
|
||||
charmap=`echo $${locale} | cut -f2 -d'.' -s` ; \
|
||||
if test -z "$${charmap}" ; then \
|
||||
charmap="UTF-8" ; \
|
||||
fi ; \
|
||||
echo "Generating locale $${inputfile}.$${charmap}" ; \
|
||||
I18NPATH=$(STAGING_DIR)/usr/share/i18n:/usr/share/i18n \
|
||||
$(HOST_DIR)/usr/bin/localedef \
|
||||
--prefix=$(TARGET_DIR) \
|
||||
--$(call LOWERCASE,$(BR2_ENDIAN))-endian \
|
||||
-i $${inputfile} -f $${charmap} \
|
||||
$${locale} ; \
|
||||
done
|
||||
endef
|
||||
TARGET_FINALIZE_HOOKS += GENERATE_GLIBC_LOCALES
|
||||
endif
|
||||
endif
|
||||
|
||||
ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
|
||||
LOCALE_WHITELIST = $(BUILD_DIR)/locales.nopurge
|
||||
LOCALE_NOPURGE = $(call qstrip,$(BR2_ENABLE_LOCALE_WHITELIST))
|
||||
|
||||
define PURGE_LOCALES
|
||||
rm -f $(LOCALE_WHITELIST)
|
||||
for i in $(LOCALE_NOPURGE) locale-archive; do echo $$i >> $(LOCALE_WHITELIST); done
|
||||
|
||||
for dir in $(wildcard $(addprefix $(TARGET_DIR),/usr/share/locale /usr/share/X11/locale /usr/man /usr/share/man /usr/lib/locale)); \
|
||||
do \
|
||||
for lang in $$(cd $$dir; ls .|grep -v man); \
|
||||
do \
|
||||
grep -qx $$lang $(LOCALE_WHITELIST) || rm -rf $$dir/$$lang; \
|
||||
done; \
|
||||
done
|
||||
endef
|
||||
TARGET_FINALIZE_HOOKS += PURGE_LOCALES
|
||||
endif
|
||||
|
||||
$(TARGETS_ROOTFS): target-finalize
|
||||
|
||||
target-finalize: $(TARGETS)
|
||||
@$(call MESSAGE,"Finalizing target directory")
|
||||
$(foreach hook,$(TARGET_FINALIZE_HOOKS),$($(hook))$(sep))
|
||||
rm -rf $(TARGET_DIR)/usr/include $(TARGET_DIR)/usr/share/aclocal \
|
||||
$(TARGET_DIR)/usr/lib/pkgconfig $(TARGET_DIR)/usr/share/pkgconfig \
|
||||
$(TARGET_DIR)/usr/lib/cmake $(TARGET_DIR)/usr/share/cmake
|
||||
find $(TARGET_DIR)/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f
|
||||
find $(TARGET_DIR)/lib \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
|
||||
find $(TARGET_DIR)/usr/lib \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
|
||||
ifneq ($(BR2_PACKAGE_GDB),y)
|
||||
rm -rf $(TARGET_DIR)/usr/share/gdb
|
||||
endif
|
||||
rm -rf $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/man
|
||||
rm -rf $(TARGET_DIR)/usr/info $(TARGET_DIR)/usr/share/info
|
||||
rm -rf $(TARGET_DIR)/usr/doc $(TARGET_DIR)/usr/share/doc
|
||||
rm -rf $(TARGET_DIR)/usr/share/gtk-doc
|
||||
-rmdir $(TARGET_DIR)/usr/share 2>/dev/null
|
||||
$(STRIP_FIND_CMD) | xargs $(STRIPCMD) 2>/dev/null || true
|
||||
if test -d $(TARGET_DIR)/lib/modules; then \
|
||||
find $(TARGET_DIR)/lib/modules -type f -name '*.ko' | \
|
||||
xargs -r $(KSTRIPCMD); fi
|
||||
|
||||
# See http://sourceware.org/gdb/wiki/FAQ, "GDB does not see any threads
|
||||
# besides the one in which crash occurred; or SIGTRAP kills my program when
|
||||
# I set a breakpoint"
|
||||
ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y)
|
||||
find $(TARGET_DIR)/lib -type f -name 'libpthread*.so*' | \
|
||||
xargs -r $(STRIPCMD) $(STRIP_STRIP_DEBUG)
|
||||
endif
|
||||
|
||||
mkdir -p $(TARGET_DIR)/etc
|
||||
# Mandatory configuration file and auxilliary cache directory
|
||||
# for recent versions of ldconfig
|
||||
touch $(TARGET_DIR)/etc/ld.so.conf
|
||||
mkdir -p $(TARGET_DIR)/var/cache/ldconfig
|
||||
if [ -x "$(TARGET_CROSS)ldconfig" ]; \
|
||||
then \
|
||||
$(TARGET_CROSS)ldconfig -r $(TARGET_DIR); \
|
||||
else \
|
||||
/sbin/ldconfig -r $(TARGET_DIR); \
|
||||
fi
|
||||
( \
|
||||
echo "NAME=Buildroot"; \
|
||||
echo "VERSION=$(BR2_VERSION_FULL)"; \
|
||||
echo "ID=buildroot"; \
|
||||
echo "VERSION_ID=$(BR2_VERSION)"; \
|
||||
echo "PRETTY_NAME=\"Buildroot $(BR2_VERSION)\"" \
|
||||
) > $(TARGET_DIR)/etc/os-release
|
||||
|
||||
@$(foreach d, $(call qstrip,$(BR2_ROOTFS_OVERLAY)), \
|
||||
$(call MESSAGE,"Copying overlay $(d)"); \
|
||||
rsync -a --ignore-times $(RSYNC_VCS_EXCLUSIONS) \
|
||||
--chmod=Du+w --exclude .empty --exclude '*~' \
|
||||
$(d)/ $(TARGET_DIR)$(sep))
|
||||
|
||||
@$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_BUILD_SCRIPT)), \
|
||||
$(call MESSAGE,"Executing post-build script $(s)"); \
|
||||
$(EXTRA_ENV) $(s) $(TARGET_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))
|
||||
|
||||
target-post-image: $(TARGETS_ROOTFS) target-finalize
|
||||
@$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_IMAGE_SCRIPT)), \
|
||||
$(call MESSAGE,"Executing post-image script $(s)"); \
|
||||
$(EXTRA_ENV) $(s) $(BINARIES_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))
|
||||
|
||||
source: $(TARGETS_SOURCE) $(HOST_SOURCE)
|
||||
|
||||
external-deps:
|
||||
@$(MAKE1) -Bs DL_MODE=SHOW_EXTERNAL_DEPS $(EXTRAMAKEARGS) source | sort -u
|
||||
|
||||
legal-info-clean:
|
||||
@rm -fr $(LEGAL_INFO_DIR)
|
||||
|
||||
legal-info-prepare: $(LEGAL_INFO_DIR)
|
||||
@$(call MESSAGE,"Collecting legal info")
|
||||
@$(call legal-license-file,buildroot,COPYING,COPYING,HOST)
|
||||
@$(call legal-manifest,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,TARGET)
|
||||
@$(call legal-manifest,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,HOST)
|
||||
@$(call legal-manifest,buildroot,$(BR2_VERSION_FULL),GPLv2+,COPYING,not saved,not saved,HOST)
|
||||
@$(call legal-warning,the Buildroot source code has not been saved)
|
||||
@$(call legal-warning,the toolchain has not been saved)
|
||||
@cp $(BR2_CONFIG) $(LEGAL_INFO_DIR)/buildroot.config
|
||||
|
||||
legal-info: dirs legal-info-clean legal-info-prepare $(TARGETS_LEGAL_INFO) \
|
||||
$(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST)
|
||||
@cat support/legal-info/README.header >>$(LEGAL_REPORT)
|
||||
@if [ -r $(LEGAL_WARNINGS) ]; then \
|
||||
cat support/legal-info/README.warnings-header \
|
||||
$(LEGAL_WARNINGS) >>$(LEGAL_REPORT); \
|
||||
cat $(LEGAL_WARNINGS); fi
|
||||
@echo "Legal info produced in $(LEGAL_INFO_DIR)"
|
||||
@rm -f $(LEGAL_WARNINGS)
|
||||
|
||||
show-targets:
|
||||
@echo $(HOST_DEPS) $(TARGETS_HOST_DEPS) $(TARGETS) $(TARGETS_ROOTFS)
|
||||
|
||||
graph-build: $(O)/build/build-time.log
|
||||
@install -d $(O)/graphs
|
||||
$(foreach o,name build duration,./support/scripts/graph-build-time \
|
||||
--type=histogram --order=$(o) --input=$(<) \
|
||||
--output=$(O)/graphs/build.hist-$(o).$(BR_GRAPH_OUT) \
|
||||
$(if $(BR2_GRAPH_ALT),--alternate-colors)$(sep))
|
||||
$(foreach t,packages steps,./support/scripts/graph-build-time \
|
||||
--type=pie-$(t) --input=$(<) \
|
||||
--output=$(O)/graphs/build.pie-$(t).$(BR_GRAPH_OUT) \
|
||||
$(if $(BR2_GRAPH_ALT),--alternate-colors)$(sep))
|
||||
|
||||
graph-depends-requirements:
|
||||
@dot -? >/dev/null 2>&1 || \
|
||||
{ echo "ERROR: The 'dot' program from Graphviz is needed for graph-depends" >&2; exit 1; }
|
||||
|
||||
graph-depends: graph-depends-requirements
|
||||
@$(INSTALL) -d $(O)/graphs
|
||||
@cd "$(CONFIG_DIR)"; \
|
||||
$(TOPDIR)/support/scripts/graph-depends $(BR2_GRAPH_DEPS_OPTS) \
|
||||
|tee $(BASE_DIR)/graphs/$(@).dot \
|
||||
|dot $(BR2_GRAPH_DOT_OPTS) -T$(BR_GRAPH_OUT) -o $(BASE_DIR)/graphs/$(@).$(BR_GRAPH_OUT)
|
||||
|
||||
else # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
|
||||
|
||||
all: menuconfig
|
||||
|
||||
endif # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
|
||||
|
||||
# configuration
|
||||
# ---------------------------------------------------------------------------
|
||||
|
||||
HOSTCFLAGS = $(CFLAGS_FOR_BUILD)
|
||||
export HOSTCFLAGS
|
||||
|
||||
$(BUILD_DIR)/buildroot-config/%onf:
|
||||
mkdir -p $(@D)/lxdialog
|
||||
$(MAKE) CC="$(HOSTCC_NOCCACHE)" HOSTCC="$(HOSTCC_NOCCACHE)" obj=$(@D) -C $(CONFIG) -f Makefile.br $(@F)
|
||||
|
||||
DEFCONFIG = $(call qstrip,$(BR2_DEFCONFIG))
|
||||
|
||||
# We don't want to fully expand BR2_DEFCONFIG here, so Kconfig will
|
||||
# recognize that if it's still at its default $(CONFIG_DIR)/defconfig
|
||||
COMMON_CONFIG_ENV = \
|
||||
BR2_DEFCONFIG='$(call qstrip,$(value BR2_DEFCONFIG))' \
|
||||
KCONFIG_AUTOCONFIG=$(BUILD_DIR)/buildroot-config/auto.conf \
|
||||
KCONFIG_AUTOHEADER=$(BUILD_DIR)/buildroot-config/autoconf.h \
|
||||
KCONFIG_TRISTATE=$(BUILD_DIR)/buildroot-config/tristate.config \
|
||||
BR2_CONFIG=$(BR2_CONFIG) \
|
||||
BR2_EXTERNAL=$(BR2_EXTERNAL)
|
||||
|
||||
xconfig: $(BUILD_DIR)/buildroot-config/qconf outputmakefile
|
||||
@mkdir -p $(BUILD_DIR)/buildroot-config
|
||||
@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
|
||||
|
||||
gconfig: $(BUILD_DIR)/buildroot-config/gconf outputmakefile
|
||||
@mkdir -p $(BUILD_DIR)/buildroot-config
|
||||
@$(COMMON_CONFIG_ENV) srctree=$(TOPDIR) $< $(CONFIG_CONFIG_IN)
|
||||
|
||||
menuconfig: $(BUILD_DIR)/buildroot-config/mconf outputmakefile
|
||||
@mkdir -p $(BUILD_DIR)/buildroot-config
|
||||
@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
|
||||
|
||||
nconfig: $(BUILD_DIR)/buildroot-config/nconf outputmakefile
|
||||
@mkdir -p $(BUILD_DIR)/buildroot-config
|
||||
@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
|
||||
|
||||
config: $(BUILD_DIR)/buildroot-config/conf outputmakefile
|
||||
@mkdir -p $(BUILD_DIR)/buildroot-config
|
||||
@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
|
||||
|
||||
oldconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
|
||||
mkdir -p $(BUILD_DIR)/buildroot-config
|
||||
@$(COMMON_CONFIG_ENV) $< --oldconfig $(CONFIG_CONFIG_IN)
|
||||
|
||||
randconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
|
||||
@mkdir -p $(BUILD_DIR)/buildroot-config
|
||||
@$(COMMON_CONFIG_ENV) $< --randconfig $(CONFIG_CONFIG_IN)
|
||||
|
||||
allyesconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
|
||||
@mkdir -p $(BUILD_DIR)/buildroot-config
|
||||
@$(COMMON_CONFIG_ENV) $< --allyesconfig $(CONFIG_CONFIG_IN)
|
||||
|
||||
allnoconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
|
||||
@mkdir -p $(BUILD_DIR)/buildroot-config
|
||||
@$(COMMON_CONFIG_ENV) $< --allnoconfig $(CONFIG_CONFIG_IN)
|
||||
|
||||
randpackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
|
||||
@mkdir -p $(BUILD_DIR)/buildroot-config
|
||||
@grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg
|
||||
@grep '^config BR2_PACKAGE_' Config.in.legacy | \
|
||||
while read config pkg; do \
|
||||
echo "# $$pkg is not set" >> $(CONFIG_DIR)/.config.nopkg; done
|
||||
@$(COMMON_CONFIG_ENV) \
|
||||
KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
|
||||
$< --randconfig $(CONFIG_CONFIG_IN)
|
||||
@rm -f $(CONFIG_DIR)/.config.nopkg
|
||||
|
||||
allyespackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
|
||||
@mkdir -p $(BUILD_DIR)/buildroot-config
|
||||
@grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg
|
||||
@grep '^config BR2_PACKAGE_' Config.in.legacy | \
|
||||
while read config pkg; do \
|
||||
echo "# $$pkg is not set" >> $(CONFIG_DIR)/.config.nopkg; done
|
||||
@$(COMMON_CONFIG_ENV) \
|
||||
KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
|
||||
$< --allyesconfig $(CONFIG_CONFIG_IN)
|
||||
@rm -f $(CONFIG_DIR)/.config.nopkg
|
||||
|
||||
allnopackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
|
||||
@mkdir -p $(BUILD_DIR)/buildroot-config
|
||||
@grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg
|
||||
@$(COMMON_CONFIG_ENV) \
|
||||
KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
|
||||
$< --allnoconfig $(CONFIG_CONFIG_IN)
|
||||
@rm -f $(CONFIG_DIR)/.config.nopkg
|
||||
|
||||
silentoldconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
|
||||
@mkdir -p $(BUILD_DIR)/buildroot-config
|
||||
$(COMMON_CONFIG_ENV) $< --silentoldconfig $(CONFIG_CONFIG_IN)
|
||||
|
||||
olddefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
|
||||
@mkdir -p $(BUILD_DIR)/buildroot-config
|
||||
$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN)
|
||||
|
||||
defconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
|
||||
@mkdir -p $(BUILD_DIR)/buildroot-config
|
||||
@$(COMMON_CONFIG_ENV) $< --defconfig$(if $(DEFCONFIG),=$(DEFCONFIG)) $(CONFIG_CONFIG_IN)
|
||||
|
||||
%_defconfig: $(BUILD_DIR)/buildroot-config/conf $(TOPDIR)/configs/%_defconfig outputmakefile
|
||||
@mkdir -p $(BUILD_DIR)/buildroot-config
|
||||
@$(COMMON_CONFIG_ENV) $< --defconfig=$(TOPDIR)/configs/$@ $(CONFIG_CONFIG_IN)
|
||||
|
||||
%_defconfig: $(BUILD_DIR)/buildroot-config/conf $(BR2_EXTERNAL)/configs/%_defconfig outputmakefile
|
||||
@mkdir -p $(BUILD_DIR)/buildroot-config
|
||||
@$(COMMON_CONFIG_ENV) $< --defconfig=$(BR2_EXTERNAL)/configs/$@ $(CONFIG_CONFIG_IN)
|
||||
|
||||
savedefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
|
||||
@mkdir -p $(BUILD_DIR)/buildroot-config
|
||||
@$(COMMON_CONFIG_ENV) $< \
|
||||
--savedefconfig=$(if $(DEFCONFIG),$(DEFCONFIG),$(CONFIG_DIR)/defconfig) \
|
||||
$(CONFIG_CONFIG_IN)
|
||||
|
||||
# check if download URLs are outdated
|
||||
source-check:
|
||||
$(MAKE1) DL_MODE=SOURCE_CHECK $(EXTRAMAKEARGS) source
|
||||
|
||||
.PHONY: defconfig savedefconfig
|
||||
|
||||
################################################################################
|
||||
#
|
||||
# Cleanup and misc junk
|
||||
#
|
||||
################################################################################
|
||||
|
||||
# outputmakefile generates a Makefile in the output directory, if using a
|
||||
# separate output directory. This allows convenient use of make in the
|
||||
# output directory.
|
||||
outputmakefile:
|
||||
ifeq ($(NEED_WRAPPER),y)
|
||||
$(Q)$(TOPDIR)/support/scripts/mkmakefile $(TOPDIR) $(O)
|
||||
endif
|
||||
|
||||
# printvars prints all the variables currently defined in our Makefiles
|
||||
printvars:
|
||||
@$(foreach V, \
|
||||
$(sort $(.VARIABLES)), \
|
||||
$(if $(filter-out environment% default automatic, \
|
||||
$(origin $V)), \
|
||||
$(info $V=$($V) ($(value $V)))))
|
||||
|
||||
clean:
|
||||
rm -rf $(TARGET_DIR) $(BINARIES_DIR) $(HOST_DIR) \
|
||||
$(BUILD_DIR) $(BASE_DIR)/staging \
|
||||
$(LEGAL_INFO_DIR)
|
||||
|
||||
distclean: clean
|
||||
ifeq ($(DL_DIR),$(TOPDIR)/dl)
|
||||
rm -rf $(DL_DIR)
|
||||
endif
|
||||
ifeq ($(O),output)
|
||||
rm -rf $(O)
|
||||
endif
|
||||
rm -rf $(BR2_CONFIG) $(CONFIG_DIR)/.config.old $(CONFIG_DIR)/.auto.deps
|
||||
|
||||
help:
|
||||
@echo 'Cleaning:'
|
||||
@echo ' clean - delete all files created by build'
|
||||
@echo ' distclean - delete all non-source files (including .config)'
|
||||
@echo
|
||||
@echo 'Build:'
|
||||
@echo ' all - make world'
|
||||
@echo ' toolchain - build toolchain'
|
||||
@echo
|
||||
@echo 'Configuration:'
|
||||
@echo ' menuconfig - interactive curses-based configurator'
|
||||
@echo ' nconfig - interactive ncurses-based configurator'
|
||||
@echo ' xconfig - interactive Qt-based configurator'
|
||||
@echo ' gconfig - interactive GTK-based configurator'
|
||||
@echo ' oldconfig - resolve any unresolved symbols in .config'
|
||||
@echo ' silentoldconfig - Same as oldconfig, but quietly, additionally update deps'
|
||||
@echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value'
|
||||
@echo ' randconfig - New config with random answer to all options'
|
||||
@echo ' defconfig - New config with default answer to all options'
|
||||
@echo ' BR2_DEFCONFIG, if set, is used as input'
|
||||
@echo ' savedefconfig - Save current config as ./defconfig (minimal config)'
|
||||
@echo ' allyesconfig - New config where all options are accepted with yes'
|
||||
@echo ' allnoconfig - New config where all options are answered with no'
|
||||
@echo ' randpackageconfig - New config with random answer to package options'
|
||||
@echo ' allyespackageconfig - New config where pkg options are accepted with yes'
|
||||
@echo ' allnopackageconfig - New config where package options are answered with no'
|
||||
ifeq ($(BR2_PACKAGE_BUSYBOX),y)
|
||||
@echo ' busybox-menuconfig - Run BusyBox menuconfig'
|
||||
endif
|
||||
ifeq ($(BR2_LINUX_KERNEL),y)
|
||||
@echo ' linux-menuconfig - Run Linux kernel menuconfig'
|
||||
@echo ' linux-savedefconfig - Run Linux kernel savedefconfig'
|
||||
endif
|
||||
ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y)
|
||||
@echo ' uclibc-menuconfig - Run uClibc menuconfig'
|
||||
endif
|
||||
ifeq ($(BR2_TARGET_BAREBOX),y)
|
||||
@echo ' barebox-menuconfig - Run barebox menuconfig'
|
||||
@echo ' barebox-savedefconfig - Run barebox savedefconfig'
|
||||
endif
|
||||
@echo
|
||||
@echo 'Documentation:'
|
||||
@echo ' manual - build manual in all formats'
|
||||
@echo ' manual-html - build manual in HTML'
|
||||
@echo ' manual-split-html - build manual in split HTML'
|
||||
@echo ' manual-pdf - build manual in PDF'
|
||||
@echo ' manual-text - build manual in text'
|
||||
@echo ' manual-epub - build manual in ePub'
|
||||
@echo ' graph-build - generate graphs of the build times'
|
||||
@echo ' graph-depends - generate graph of the dependency tree'
|
||||
@echo
|
||||
@echo 'Miscellaneous:'
|
||||
@echo ' source - download all sources needed for offline-build'
|
||||
@echo ' source-check - check selected packages for valid download URLs'
|
||||
@echo ' external-deps - list external packages used'
|
||||
@echo ' legal-info - generate info about license compliance'
|
||||
@echo
|
||||
@echo ' make V=0|1 - 0 => quiet build (default), 1 => verbose build'
|
||||
@echo ' make O=dir - Locate all output files in "dir", including .config'
|
||||
@echo
|
||||
@echo 'Built-in configs:'
|
||||
@$(foreach b, $(sort $(notdir $(wildcard $(TOPDIR)/configs/*_defconfig))), \
|
||||
printf " %-35s - Build for %s\\n" $(b) $(b:_defconfig=);)
|
||||
ifneq ($(wildcard $(BR2_EXTERNAL)/configs/*_defconfig),)
|
||||
@echo
|
||||
@echo 'User-provided configs:'
|
||||
@$(foreach b, $(sort $(notdir $(wildcard $(BR2_EXTERNAL)/configs/*_defconfig))), \
|
||||
printf " %-35s - Build for %s\\n" $(b) $(b:_defconfig=);)
|
||||
endif
|
||||
@echo
|
||||
@echo 'For further details, see README, generate the Buildroot manual, or consult'
|
||||
@echo 'it on-line at http://buildroot.org/docs.html'
|
||||
@echo
|
||||
|
||||
release: OUT = buildroot-$(BR2_VERSION)
|
||||
|
||||
# Create release tarballs. We need to fiddle a bit to add the generated
|
||||
# documentation to the git output
|
||||
release:
|
||||
git archive --format=tar --prefix=$(OUT)/ HEAD > $(OUT).tar
|
||||
$(MAKE) O=$(OUT) manual-html manual-text manual-pdf
|
||||
tar rf $(OUT).tar $(OUT)
|
||||
gzip -9 -c < $(OUT).tar > $(OUT).tar.gz
|
||||
bzip2 -9 -c < $(OUT).tar > $(OUT).tar.bz2
|
||||
rm -rf $(OUT) $(OUT).tar
|
||||
|
||||
print-version:
|
||||
@echo $(BR2_VERSION_FULL)
|
||||
|
||||
include docs/manual/manual.mk
|
||||
-include $(BR2_EXTERNAL)/docs/*/*.mk
|
||||
|
||||
.PHONY: $(noconfig_targets)
|
|
@ -0,0 +1,62 @@
|
|||
#
|
||||
# Makefile.legacy - support for backward compatibility
|
||||
#
|
||||
# This file contains placeholders to detect backward-compatibility problems.
|
||||
# When a buildroot "API" feature is being deprecated, a rule should be added
|
||||
# here that issues an error when the old feature is used.
|
||||
#
|
||||
# This file is not included if BR2_DEPRECATED is selected, so it is possible
|
||||
# to bypass the errors (although that's usually a bad idea).
|
||||
|
||||
ifeq ($(BR2_LEGACY),y)
|
||||
$(error "You have legacy configuration in your .config! Please check your configuration.")
|
||||
endif
|
||||
|
||||
#
|
||||
# Legacy options from 2014.02
|
||||
#
|
||||
|
||||
# The BUILDROOT_DL_DIR environment variable was renamed by BR2_DL_DIR. We
|
||||
# want to detect someone using the old variable, _except_ if also the new
|
||||
# variable was set. By the time we get here, however, we no longer have
|
||||
# access to the BR2_DL_DIR environment variable (because it has been overridden
|
||||
# by the .config inclusion). However, the environment variable (if defined) was
|
||||
# saved in DL_DIR, so we can use that.
|
||||
ifneq ($(BUILDROOT_DL_DIR),)
|
||||
ifneq ($(BUILDROOT_DL_DIR),$(DL_DIR))
|
||||
$(error "The BUILDROOT_DL_DIR environment variable was renamed to BR2_DL_DIR.")
|
||||
endif
|
||||
endif
|
||||
|
||||
# If a script is using the deprecated BUILDROOT_CONFIG, make sure it fails.
|
||||
# Add some directories in front just in case someone used dirname on it.
|
||||
BUILDROOT_CONFIG_FAKE = /tmp/deprecated/The-BUILDROOT_CONFIG-environment-variable-was-renamed-to-BR2_CONFIG
|
||||
|
||||
# Similar to above for BUILDROOT_CONFIG, but here we have no .config equivalent.
|
||||
ifneq ($(BUILDROOT_CONFIG),)
|
||||
ifneq ($(BUILDROOT_CONFIG),$(BR2_CONFIG))
|
||||
ifneq ($(BUILDROOT_CONFIG),$(BUILDROOT_CONFIG_FAKE))
|
||||
$(error "The BUILDROOT_CONFIG environment variable was renamed to BR2_CONFIG.")
|
||||
endif
|
||||
endif
|
||||
endif
|
||||
|
||||
BUILDROOT_CONFIG = $(BUILDROOT_CONFIG_FAKE)
|
||||
export BUILDROOT_CONFIG
|
||||
|
||||
#
|
||||
# Legacy options from 2012.08
|
||||
#
|
||||
|
||||
host-pkg-config:
|
||||
@$(call MESSAGE,host-pkg-config is replaced by host-pkgconf)
|
||||
@$(call MESSAGE,please update your .mk files)
|
||||
@false
|
||||
.PHONY: host-pkg-config
|
||||
|
||||
#
|
||||
# Legacy options from 2012.05
|
||||
#
|
||||
GENTARGETS = $$(error The GENTARGETS macro no longer exists; use $$$$(eval $$$$(generic-package)) or $$$$(eval $$$$(host-generic-package)))
|
||||
AUTOTARGETS = $$(error The AUTOTARGETS macro no longer exists; use $$$$(eval $$$$(autotools-package)) or $$$$(eval $$$$(host-autotools-package)))
|
||||
CMAKETARGETS = $$(error The CMAKETARGETS macro no longer exists; use $$$$(eval $$$$(cmake-package)) or $$$$(eval $$$$(host-cmake-package)))
|
|
@ -0,0 +1,59 @@
|
|||
To build and use the buildroot stuff, do the following:
|
||||
|
||||
1) run 'make menuconfig'
|
||||
2) select the packages you wish to compile
|
||||
3) run 'make'
|
||||
4) wait while it compiles
|
||||
5) Use your shiny new root filesystem. Depending on which sort of
|
||||
root filesystem you selected, you may want to loop mount it,
|
||||
chroot into it, nfs mount it on your target device, burn it
|
||||
to flash, or whatever is appropriate for your target system.
|
||||
|
||||
You do not need to be root to build or run buildroot. Have fun!
|
||||
|
||||
Offline build:
|
||||
==============
|
||||
|
||||
In order to do an offline-build (not connected to the net), fetch all
|
||||
selected source by issuing a
|
||||
$ make source
|
||||
|
||||
before you disconnect.
|
||||
If your build-host is never connected, then you have to copy buildroot
|
||||
and your toplevel .config to a machine that has an internet-connection
|
||||
and issue "make source" there, then copy the content of your dl/ dir to
|
||||
the build-host.
|
||||
|
||||
Building out-of-tree:
|
||||
=====================
|
||||
|
||||
Buildroot supports building out of tree with a syntax similar
|
||||
to the Linux kernel. To use it, add O=<directory> to the
|
||||
make command line, E.G.:
|
||||
|
||||
$ make O=/tmp/build
|
||||
|
||||
And all the output files (including .config) will be located under /tmp/build.
|
||||
|
||||
More finegrained configuration:
|
||||
===============================
|
||||
|
||||
You can specify a config-file for uClibc:
|
||||
$ make UCLIBC_CONFIG_FILE=/my/uClibc.config
|
||||
|
||||
And you can specify a config-file for busybox:
|
||||
$ make BUSYBOX_CONFIG_FILE=/my/busybox.config
|
||||
|
||||
To use a non-standard host-compiler (if you do not have 'gcc'),
|
||||
make sure that the compiler is in your PATH and that the library paths are
|
||||
setup properly, if your compiler is built dynamically:
|
||||
$ make HOSTCC=gcc-4.3.orig HOSTCXX=gcc-4.3-mine
|
||||
|
||||
Depending on your configuration, there are some targets you can use to
|
||||
use menuconfig of certain packages. This includes:
|
||||
$ make HOSTCC=gcc-4.3 linux-menuconfig
|
||||
$ make HOSTCC=gcc-4.3 uclibc-menuconfig
|
||||
$ make HOSTCC=gcc-4.3 busybox-menuconfig
|
||||
|
||||
Please feed suggestions, bug reports, insults, and bribes back to the
|
||||
buildroot mailing list: buildroot@buildroot.org
|
|
@ -0,0 +1,375 @@
|
|||
menu "Target options"
|
||||
|
||||
config BR2_ARCH_IS_64
|
||||
bool
|
||||
|
||||
config BR2_KERNEL_64_USERLAND_32
|
||||
bool
|
||||
|
||||
config BR2_SOFT_FLOAT
|
||||
bool
|
||||
|
||||
choice
|
||||
prompt "Target Architecture"
|
||||
default BR2_i386
|
||||
help
|
||||
Select the target architecture family to build for.
|
||||
|
||||
config BR2_arcle
|
||||
bool "ARC (little endian)"
|
||||
help
|
||||
Synopsys' DesignWare ARC Processor Cores are a family of 32-bit CPUs
|
||||
that can be used from deeply embedded to high performance host
|
||||
applications. Little endian.
|
||||
|
||||
config BR2_arceb
|
||||
bool "ARC (big endian)"
|
||||
help
|
||||
Synopsys' DesignWare ARC Processor Cores are a family of 32-bit CPUs
|
||||
that can be used from deeply embedded to high performance host
|
||||
applications. Big endian.
|
||||
|
||||
config BR2_arm
|
||||
bool "ARM (little endian)"
|
||||
help
|
||||
ARM is a 32-bit reduced instruction set computer (RISC) instruction
|
||||
set architecture (ISA) developed by ARM Holdings. Little endian.
|
||||
http://www.arm.com/
|
||||
http://en.wikipedia.org/wiki/ARM
|
||||
|
||||
config BR2_armeb
|
||||
bool "ARM (big endian)"
|
||||
help
|
||||
ARM is a 32-bit reduced instruction set computer (RISC) instruction
|
||||
set architecture (ISA) developed by ARM Holdings. Big endian.
|
||||
http://www.arm.com/
|
||||
http://en.wikipedia.org/wiki/ARM
|
||||
|
||||
config BR2_aarch64
|
||||
bool "AArch64"
|
||||
select BR2_ARCH_IS_64
|
||||
help
|
||||
Aarch64 is a 64-bit architecture developed by ARM Holdings.
|
||||
http://www.arm.com/products/processors/instruction-set-architectures/armv8-architecture.php
|
||||
http://en.wikipedia.org/wiki/ARM
|
||||
|
||||
config BR2_avr32
|
||||
bool "AVR32"
|
||||
select BR2_SOFT_FLOAT
|
||||
# This architecture is obsolete and complicated to maintain to
|
||||
# do the lack of upstream support in the major toolchain
|
||||
# components. If you're interested by AVR32, contact the
|
||||
# Buildroot community. Otherwise, its support will be removed
|
||||
# by the 2015.02 release.
|
||||
depends on BR2_DEPRECATED_SINCE_2014_08
|
||||
help
|
||||
The AVR32 is a 32-bit RISC microprocessor architecture designed by
|
||||
Atmel.
|
||||
http://www.atmel.com/
|
||||
http://en.wikipedia.org/wiki/Avr32
|
||||
|
||||
config BR2_bfin
|
||||
bool "Blackfin"
|
||||
help
|
||||
The Blackfin is a family of 16 or 32-bit microprocessors developed,
|
||||
manufactured and marketed by Analog Devices.
|
||||
http://www.analog.com/
|
||||
http://en.wikipedia.org/wiki/Blackfin
|
||||
|
||||
config BR2_i386
|
||||
bool "i386"
|
||||
help
|
||||
Intel i386 architecture compatible microprocessor
|
||||
http://en.wikipedia.org/wiki/I386
|
||||
|
||||
config BR2_m68k
|
||||
bool "m68k"
|
||||
depends on BROKEN # ice in uclibc / inet_ntoa_r
|
||||
help
|
||||
Motorola 68000 family microprocessor
|
||||
http://en.wikipedia.org/wiki/M68k
|
||||
|
||||
config BR2_microblazeel
|
||||
bool "Microblaze AXI (little endian)"
|
||||
help
|
||||
Soft processor core designed for Xilinx FPGAs from Xilinx. AXI bus
|
||||
based architecture (little endian)
|
||||
http://www.xilinx.com
|
||||
http://en.wikipedia.org/wiki/Microblaze
|
||||
|
||||
config BR2_microblazebe
|
||||
bool "Microblaze non-AXI (big endian)"
|
||||
help
|
||||
Soft processor core designed for Xilinx FPGAs from Xilinx. PLB bus
|
||||
based architecture (non-AXI, big endian)
|
||||
http://www.xilinx.com
|
||||
http://en.wikipedia.org/wiki/Microblaze
|
||||
|
||||
config BR2_mips
|
||||
bool "MIPS (big endian)"
|
||||
help
|
||||
MIPS is a RISC microprocessor from MIPS Technologies. Big endian.
|
||||
http://www.mips.com/
|
||||
http://en.wikipedia.org/wiki/MIPS_Technologies
|
||||
|
||||
config BR2_mipsel
|
||||
bool "MIPS (little endian)"
|
||||
help
|
||||
MIPS is a RISC microprocessor from MIPS Technologies. Little endian.
|
||||
http://www.mips.com/
|
||||
http://en.wikipedia.org/wiki/MIPS_Technologies
|
||||
|
||||
config BR2_mips64
|
||||
bool "MIPS64 (big endian)"
|
||||
select BR2_ARCH_IS_64
|
||||
help
|
||||
MIPS is a RISC microprocessor from MIPS Technologies. Big endian.
|
||||
http://www.mips.com/
|
||||
http://en.wikipedia.org/wiki/MIPS_Technologies
|
||||
|
||||
config BR2_mips64el
|
||||
bool "MIPS64 (little endian)"
|
||||
select BR2_ARCH_IS_64
|
||||
help
|
||||
MIPS is a RISC microprocessor from MIPS Technologies. Little endian.
|
||||
http://www.mips.com/
|
||||
http://en.wikipedia.org/wiki/MIPS_Technologies
|
||||
|
||||
config BR2_nios2
|
||||
bool "Nios II"
|
||||
help
|
||||
Nios II is a soft core processor from Altera Corporation.
|
||||
http://www.altera.com/
|
||||
http://en.wikipedia.org/wiki/Nios_II
|
||||
|
||||
config BR2_powerpc
|
||||
bool "PowerPC"
|
||||
help
|
||||
PowerPC is a RISC architecture created by Apple-IBM-Motorola alliance.
|
||||
Big endian.
|
||||
http://www.power.org/
|
||||
http://en.wikipedia.org/wiki/Powerpc
|
||||
|
||||
config BR2_powerpc64
|
||||
bool "PowerPC64 (big endian)"
|
||||
select BR2_ARCH_IS_64
|
||||
help
|
||||
PowerPC is a RISC architecture created by Apple-IBM-Motorola alliance.
|
||||
Big endian.
|
||||
http://www.power.org/
|
||||
http://en.wikipedia.org/wiki/Powerpc
|
||||
|
||||
config BR2_powerpc64le
|
||||
bool "PowerPC64 (little endian)"
|
||||
select BR2_ARCH_IS_64
|
||||
help
|
||||
PowerPC is a RISC architecture created by Apple-IBM-Motorola alliance.
|
||||
Little endian.
|
||||
http://www.power.org/
|
||||
http://en.wikipedia.org/wiki/Powerpc
|
||||
|
||||
config BR2_sh
|
||||
bool "SuperH"
|
||||
help
|
||||
SuperH (or SH) is a 32-bit reduced instruction set computer (RISC)
|
||||
instruction set architecture (ISA) developed by Hitachi.
|
||||
http://www.hitachi.com/
|
||||
http://en.wikipedia.org/wiki/SuperH
|
||||
|
||||
config BR2_sh64
|
||||
bool "SuperH64"
|
||||
help
|
||||
SuperH64 (or SH) is a 64-bit reduced instruction set computer (RISC)
|
||||
instruction set architecture (ISA) developed by Hitachi.
|
||||
http://www.hitachi.com/
|
||||
http://en.wikipedia.org/wiki/SuperH
|
||||
|
||||
config BR2_sparc
|
||||
bool "SPARC"
|
||||
help
|
||||
SPARC (from Scalable Processor Architecture) is a RISC instruction
|
||||
set architecture (ISA) developed by Sun Microsystems.
|
||||
http://www.oracle.com/sun
|
||||
http://en.wikipedia.org/wiki/Sparc
|
||||
|
||||
config BR2_x86_64
|
||||
bool "x86_64"
|
||||
select BR2_ARCH_IS_64
|
||||
help
|
||||
x86-64 is an extension of the x86 instruction set (Intel i386
|
||||
architecture compatible microprocessor).
|
||||
http://en.wikipedia.org/wiki/X86_64
|
||||
|
||||
config BR2_xtensa
|
||||
bool "Xtensa"
|
||||
help
|
||||
Xtensa is a Tensilica processor IP architecture.
|
||||
http://en.wikipedia.org/wiki/Xtensa
|
||||
http://www.tensilica.com/
|
||||
|
||||
endchoice
|
||||
|
||||
# The following string values are defined by the individual
|
||||
# Config.in.$ARCH files
|
||||
config BR2_ARCH
|
||||
string
|
||||
|
||||
config BR2_ENDIAN
|
||||
string
|
||||
|
||||
config BR2_GCC_TARGET_ARCH
|
||||
string
|
||||
|
||||
config BR2_GCC_TARGET_ABI
|
||||
string
|
||||
|
||||
config BR2_GCC_TARGET_CPU
|
||||
string
|
||||
|
||||
config BR2_GCC_TARGET_CPU_REVISION
|
||||
string
|
||||
|
||||
# The value of this option will be passed as --with-fpu=<value> when
|
||||
# building gcc (internal backend) or -mfpu=<value> in the toolchain
|
||||
# wrapper (external toolchain)
|
||||
config BR2_GCC_TARGET_FPU
|
||||
string
|
||||
|
||||
# The value of this option will be passed as --with-float=<value> when
|
||||
# building gcc (internal backend) or -mfloat-abi=<value> in the toolchain
|
||||
# wrapper (external toolchain)
|
||||
config BR2_GCC_TARGET_FLOAT_ABI
|
||||
string
|
||||
|
||||
# The value of this option will be passed as --with-mode=<value> when
|
||||
# building gcc (internal backend) or -m<value> in the toolchain
|
||||
# wrapper (external toolchain)
|
||||
config BR2_GCC_TARGET_MODE
|
||||
string
|
||||
|
||||
# If the architecture has atomic operations, select this:
|
||||
config BR2_ARCH_HAS_ATOMICS
|
||||
bool
|
||||
|
||||
# Must be selected by binary formats that support shared libraries.
|
||||
config BR2_BINFMT_SUPPORTS_SHARED
|
||||
bool
|
||||
|
||||
# Set up target binary format
|
||||
choice
|
||||
prompt "Target Binary Format"
|
||||
default BR2_BINFMT_ELF if !(BR2_bfin || BR2_m68k)
|
||||
default BR2_BINFMT_FDPIC if BR2_bfin
|
||||
default BR2_BINFMT_FLAT if BR2_m68k
|
||||
|
||||
config BR2_BINFMT_ELF
|
||||
bool "ELF"
|
||||
depends on !BR2_bfin && !BR2_m68k
|
||||
select BR2_BINFMT_SUPPORTS_SHARED
|
||||
help
|
||||
ELF (Executable and Linkable Format) is a format for libraries and
|
||||
executables used across different architectures and operating
|
||||
systems.
|
||||
|
||||
config BR2_BINFMT_FDPIC
|
||||
bool "FDPIC"
|
||||
depends on BR2_bfin
|
||||
select BR2_BINFMT_SUPPORTS_SHARED
|
||||
help
|
||||
ELF FDPIC binaries are based on ELF, but allow the individual load
|
||||
segments of a binary to be located in memory independently of each
|
||||
other. This makes this format ideal for use in environments where no
|
||||
MMU is available.
|
||||
|
||||
config BR2_BINFMT_FLAT
|
||||
bool "FLAT"
|
||||
depends on BR2_bfin || BR2_m68k
|
||||
help
|
||||
FLAT binary is a relatively simple and lightweight executable format
|
||||
based on the original a.out format. It is widely used in environment
|
||||
where no MMU is available.
|
||||
|
||||
endchoice
|
||||
|
||||
# Set up flat binary type
|
||||
choice
|
||||
prompt "FLAT Binary type"
|
||||
depends on BR2_BINFMT_FLAT
|
||||
default BR2_BINFMT_FLAT_ONE
|
||||
|
||||
config BR2_BINFMT_FLAT_ONE
|
||||
bool "One memory region"
|
||||
help
|
||||
All segments are linked into one memory region.
|
||||
|
||||
config BR2_BINFMT_FLAT_SEP_DATA
|
||||
bool "Separate data and code region"
|
||||
help
|
||||
Allow for the data and text segments to be separated and placed in
|
||||
different regions of memory.
|
||||
|
||||
config BR2_BINFMT_FLAT_SHARED
|
||||
bool "Shared binary"
|
||||
select BR2_BINFMT_SUPPORTS_SHARED
|
||||
help
|
||||
Allow to load and link indiviual FLAT binaries at run time.
|
||||
|
||||
endchoice
|
||||
|
||||
if BR2_arcle || BR2_arceb
|
||||
source "arch/Config.in.arc"
|
||||
endif
|
||||
|
||||
if BR2_arm || BR2_armeb
|
||||
source "arch/Config.in.arm"
|
||||
endif
|
||||
|
||||
if BR2_aarch64
|
||||
source "arch/Config.in.aarch64"
|
||||
endif
|
||||
|
||||
if BR2_avr32
|
||||
source "arch/Config.in.avr32"
|
||||
endif
|
||||
|
||||
if BR2_bfin
|
||||
source "arch/Config.in.bfin"
|
||||
endif
|
||||
|
||||
if BR2_m68k
|
||||
source "arch/Config.in.m68k"
|
||||
endif
|
||||
|
||||
if BR2_microblazeel || BR2_microblazebe
|
||||
source "arch/Config.in.microblaze"
|
||||
endif
|
||||
|
||||
if BR2_mips || BR2_mips64 || BR2_mipsel || BR2_mips64el
|
||||
source "arch/Config.in.mips"
|
||||
endif
|
||||
|
||||
if BR2_nios2
|
||||
source "arch/Config.in.nios2"
|
||||
endif
|
||||
|
||||
if BR2_powerpc || BR2_powerpc64 || BR2_powerpc64le
|
||||
source "arch/Config.in.powerpc"
|
||||
endif
|
||||
|
||||
if BR2_sh || BR2_sh64
|
||||
source "arch/Config.in.sh"
|
||||
endif
|
||||
|
||||
if BR2_sparc
|
||||
source "arch/Config.in.sparc"
|
||||
endif
|
||||
|
||||
if BR2_i386 || BR2_x86_64
|
||||
source "arch/Config.in.x86"
|
||||
endif
|
||||
|
||||
if BR2_xtensa
|
||||
source "arch/Config.in.xtensa"
|
||||
endif
|
||||
|
||||
endmenu # Target options
|
|
@ -0,0 +1,8 @@
|
|||
config BR2_ARCH
|
||||
default "aarch64" if BR2_aarch64
|
||||
|
||||
config BR2_ENDIAN
|
||||
default "LITTLE"
|
||||
|
||||
config BR2_ARCH_HAS_ATOMICS
|
||||
default y
|
|
@ -0,0 +1,42 @@
|
|||
choice
|
||||
prompt "Target CPU"
|
||||
depends on BR2_arc
|
||||
default BR2_arc770d
|
||||
help
|
||||
Specific CPU to use
|
||||
|
||||
config BR2_arc750d
|
||||
bool "ARC 750D"
|
||||
|
||||
config BR2_arc770d
|
||||
bool "ARC 770D"
|
||||
|
||||
config BR2_archs38
|
||||
bool "ARC HS38"
|
||||
|
||||
endchoice
|
||||
|
||||
# Choice of atomic instructions presence
|
||||
config BR2_ARC_ATOMIC_EXT
|
||||
bool "Atomic extension (LLOCK/SCOND instructions)"
|
||||
default y if BR2_arc770d || BR2_archs38
|
||||
|
||||
config BR2_ARCH_HAS_ATOMICS
|
||||
default y if BR2_ARC_ATOMIC_EXT
|
||||
|
||||
config BR2_ARCH
|
||||
default "arc" if BR2_arcle
|
||||
default "arceb" if BR2_arceb
|
||||
|
||||
config BR2_arc
|
||||
bool
|
||||
default y if BR2_arcle || BR2_arceb
|
||||
|
||||
config BR2_ENDIAN
|
||||
default "LITTLE" if BR2_arcle
|
||||
default "BIG" if BR2_arceb
|
||||
|
||||
config BR2_GCC_TARGET_CPU
|
||||
default "arc700" if BR2_arc750d
|
||||
default "arc700" if BR2_arc770d
|
||||
default "archs" if BR2_archs38
|
|
@ -0,0 +1,403 @@
|
|||
# arm cpu features
|
||||
config BR2_ARM_CPU_HAS_NEON
|
||||
bool
|
||||
|
||||
# for some cores, NEON support is optional
|
||||
config BR2_ARM_CPU_MAYBE_HAS_NEON
|
||||
bool
|
||||
|
||||
# for some cores, VFPv2 is optional
|
||||
config BR2_ARM_CPU_MAYBE_HAS_VFPV2
|
||||
bool
|
||||
|
||||
config BR2_ARM_CPU_HAS_VFPV2
|
||||
bool
|
||||
|
||||
# for some cores, VFPv3 is optional
|
||||
config BR2_ARM_CPU_MAYBE_HAS_VFPV3
|
||||
bool
|
||||
select BR2_ARM_CPU_MAYBE_HAS_VFPV2
|
||||
|
||||
config BR2_ARM_CPU_HAS_VFPV3
|
||||
bool
|
||||
select BR2_ARM_CPU_HAS_VFPV2
|
||||
|
||||
# for some cores, VFPv4 is optional
|
||||
config BR2_ARM_CPU_MAYBE_HAS_VFPV4
|
||||
bool
|
||||
select BR2_ARM_CPU_MAYBE_HAS_VFPV3
|
||||
|
||||
config BR2_ARM_CPU_HAS_VFPV4
|
||||
bool
|
||||
select BR2_ARM_CPU_HAS_VFPV3
|
||||
|
||||
config BR2_ARM_CPU_HAS_THUMB
|
||||
bool
|
||||
|
||||
config BR2_ARM_CPU_HAS_THUMB2
|
||||
bool
|
||||
|
||||
config BR2_ARM_CPU_ARMV4
|
||||
bool
|
||||
|
||||
config BR2_ARM_CPU_ARMV5
|
||||
bool
|
||||
|
||||
config BR2_ARM_CPU_ARMV6
|
||||
bool
|
||||
|
||||
config BR2_ARM_CPU_ARMV7A
|
||||
bool
|
||||
|
||||
choice
|
||||
prompt "Target Architecture Variant"
|
||||
depends on BR2_arm || BR2_armeb
|
||||
default BR2_arm926t
|
||||
help
|
||||
Specific CPU variant to use
|
||||
|
||||
config BR2_arm920t
|
||||
bool "arm920t"
|
||||
select BR2_ARM_CPU_HAS_THUMB
|
||||
select BR2_ARM_CPU_ARMV4
|
||||
config BR2_arm922t
|
||||
bool "arm922t"
|
||||
select BR2_ARM_CPU_HAS_THUMB
|
||||
select BR2_ARM_CPU_ARMV4
|
||||
config BR2_arm926t
|
||||
bool "arm926t"
|
||||
select BR2_ARM_CPU_MAYBE_HAS_VFPV2
|
||||
select BR2_ARM_CPU_HAS_THUMB
|
||||
select BR2_ARM_CPU_ARMV5
|
||||
config BR2_arm1136jf_s
|
||||
bool "arm1136jf-s"
|
||||
select BR2_ARM_CPU_HAS_VFPV2
|
||||
select BR2_ARM_CPU_HAS_THUMB
|
||||
select BR2_ARM_CPU_ARMV6
|
||||
config BR2_arm1176jz_s
|
||||
bool "arm1176jz-s"
|
||||
select BR2_ARM_CPU_HAS_THUMB
|
||||
select BR2_ARM_CPU_ARMV6
|
||||
config BR2_arm1176jzf_s
|
||||
bool "arm1176jzf-s"
|
||||
select BR2_ARM_CPU_HAS_VFPV2
|
||||
select BR2_ARM_CPU_HAS_THUMB
|
||||
select BR2_ARM_CPU_ARMV6
|
||||
config BR2_cortex_a5
|
||||
bool "cortex-A5"
|
||||
select BR2_ARM_CPU_MAYBE_HAS_NEON
|
||||
select BR2_ARM_CPU_MAYBE_HAS_VFPV4
|
||||
select BR2_ARM_CPU_HAS_THUMB2
|
||||
select BR2_ARM_CPU_ARMV7A
|
||||
config BR2_cortex_a7
|
||||
bool "cortex-A7"
|
||||
select BR2_ARM_CPU_HAS_NEON
|
||||
select BR2_ARM_CPU_HAS_VFPV4
|
||||
select BR2_ARM_CPU_HAS_THUMB2
|
||||
select BR2_ARM_CPU_ARMV7A
|
||||
config BR2_cortex_a8
|
||||
bool "cortex-A8"
|
||||
select BR2_ARM_CPU_HAS_NEON
|
||||
select BR2_ARM_CPU_HAS_VFPV3
|
||||
select BR2_ARM_CPU_HAS_THUMB2
|
||||
select BR2_ARM_CPU_ARMV7A
|
||||
config BR2_cortex_a9
|
||||
bool "cortex-A9"
|
||||
select BR2_ARM_CPU_MAYBE_HAS_NEON
|
||||
select BR2_ARM_CPU_MAYBE_HAS_VFPV3
|
||||
select BR2_ARM_CPU_HAS_THUMB2
|
||||
select BR2_ARM_CPU_ARMV7A
|
||||
config BR2_cortex_a12
|
||||
bool "cortex-A12"
|
||||
select BR2_ARM_CPU_HAS_NEON
|
||||
select BR2_ARM_CPU_HAS_VFPV4
|
||||
select BR2_ARM_CPU_HAS_THUMB2
|
||||
select BR2_ARM_CPU_ARMV7A
|
||||
config BR2_cortex_a15
|
||||
bool "cortex-A15"
|
||||
select BR2_ARM_CPU_HAS_NEON
|
||||
select BR2_ARM_CPU_HAS_VFPV4
|
||||
select BR2_ARM_CPU_HAS_THUMB2
|
||||
select BR2_ARM_CPU_ARMV7A
|
||||
config BR2_fa526
|
||||
bool "fa526/626"
|
||||
select BR2_ARM_CPU_ARMV4
|
||||
config BR2_pj4
|
||||
bool "pj4"
|
||||
select BR2_ARM_CPU_HAS_VFPV3
|
||||
select BR2_ARM_CPU_ARMV7A
|
||||
config BR2_strongarm
|
||||
bool "strongarm sa110/sa1100"
|
||||
select BR2_ARM_CPU_ARMV4
|
||||
config BR2_xscale
|
||||
bool "xscale"
|
||||
select BR2_ARM_CPU_HAS_THUMB
|
||||
select BR2_ARM_CPU_ARMV5
|
||||
config BR2_iwmmxt
|
||||
bool "iwmmxt"
|
||||
select BR2_ARM_CPU_ARMV5
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "Target ABI"
|
||||
depends on BR2_arm || BR2_armeb
|
||||
default BR2_ARM_EABI
|
||||
help
|
||||
Application Binary Interface to use. The Application Binary
|
||||
Interface describes the calling conventions (how arguments
|
||||
are passed to functions, how the return value is passed, how
|
||||
system calls are made, etc.).
|
||||
|
||||
config BR2_ARM_EABI
|
||||
bool "EABI"
|
||||
help
|
||||
The EABI is currently the standard ARM ABI, which is used in
|
||||
most projects. It supports both the 'soft' floating point
|
||||
model (in which floating point instructions are emulated in
|
||||
software) and the 'softfp' floating point model (in which
|
||||
floating point instructions are executed using an hardware
|
||||
floating point unit, but floating point arguments to
|
||||
functions are passed in integer registers).
|
||||
|
||||
The 'softfp' floating point model is link-compatible with
|
||||
the 'soft' floating point model, i.e you can link a library
|
||||
built 'soft' with some other code built 'softfp'.
|
||||
|
||||
However, passing the floating point arguments in integer
|
||||
registers is a bit inefficient, so if your ARM processor has
|
||||
a floating point unit, and you don't have pre-compiled
|
||||
'soft' or 'softfp' code, using the EABIhf ABI will provide
|
||||
better floating point performances.
|
||||
|
||||
If your processor does not have a floating point unit, then
|
||||
you must use this ABI.
|
||||
|
||||
config BR2_ARM_EABIHF
|
||||
bool "EABIhf"
|
||||
depends on BR2_ARM_CPU_MAYBE_HAS_VFPV2 || BR2_ARM_CPU_HAS_VFPV2
|
||||
help
|
||||
The EABIhf is an extension of EABI which supports the 'hard'
|
||||
floating point model. This model uses the floating point
|
||||
unit to execute floating point instructions, and passes
|
||||
floating point arguments in floating point registers.
|
||||
|
||||
It is more efficient than EABI for floating point related
|
||||
workload. However, it does not allow to link against code
|
||||
that has been pre-built for the 'soft' or 'softfp' floating
|
||||
point models.
|
||||
|
||||
If your processor has a floating point unit, and you don't
|
||||
depend on existing pre-compiled code, this option is most
|
||||
likely the best choice.
|
||||
|
||||
endchoice
|
||||
|
||||
config BR2_ARM_ENABLE_NEON
|
||||
bool "Enable NEON SIMD extension support"
|
||||
depends on BR2_ARM_CPU_MAYBE_HAS_NEON
|
||||
select BR2_ARM_CPU_HAS_NEON
|
||||
help
|
||||
For some CPU cores, the NEON SIMD extension is optional.
|
||||
Select this option if you are certain your particular
|
||||
implementation has NEON support and you want to use it.
|
||||
|
||||
choice
|
||||
prompt "Floating point strategy"
|
||||
depends on BR2_ARM_EABI || BR2_ARM_EABIHF
|
||||
default BR2_ARM_FPU_VFPV4D16 if BR2_ARM_CPU_HAS_VFPV4
|
||||
default BR2_ARM_FPU_VFPV3D16 if BR2_ARM_CPU_HAS_VFPV3
|
||||
default BR2_ARM_FPU_VFPV2 if BR2_ARM_CPU_HAS_VFPV2
|
||||
default BR2_ARM_SOFT_FLOAT if !BR2_ARM_CPU_HAS_VFPV2
|
||||
|
||||
config BR2_ARM_SOFT_FLOAT
|
||||
bool "Soft float"
|
||||
depends on BR2_ARM_EABI
|
||||
select BR2_SOFT_FLOAT
|
||||
help
|
||||
This option allows to use software emulated floating
|
||||
point. It should be used for ARM cores that do not include a
|
||||
Vector Floating Point unit, such as ARMv5 cores (ARM926 for
|
||||
example) or certain ARMv6 cores.
|
||||
|
||||
config BR2_ARM_FPU_VFPV2
|
||||
bool "VFPv2"
|
||||
depends on BR2_ARM_CPU_HAS_VFPV2 || BR2_ARM_CPU_MAYBE_HAS_VFPV2
|
||||
help
|
||||
This option allows to use the VFPv2 floating point unit, as
|
||||
available in some ARMv5 processors (ARM926EJ-S) and some
|
||||
ARMv6 processors (ARM1136JF-S, ARM1176JZF-S and ARM11
|
||||
MPCore).
|
||||
|
||||
Note that this option is also safe to use for newer cores
|
||||
such as Cortex-A, because the VFPv3 and VFPv4 units are
|
||||
backward compatible with VFPv2.
|
||||
|
||||
config BR2_ARM_FPU_VFPV3
|
||||
bool "VFPv3"
|
||||
depends on BR2_ARM_CPU_HAS_VFPV3 || BR2_ARM_CPU_MAYBE_HAS_VFPV3
|
||||
help
|
||||
This option allows to use the VFPv3 floating point unit, as
|
||||
available in some ARMv7 processors (Cortex-A{8, 9}). This
|
||||
option requires a VFPv3 unit that has 32 double-precision
|
||||
registers, which is not necessarily the case in all SOCs
|
||||
based on Cortex-A{8, 9}. If you're unsure, use VFPv3-D16
|
||||
instead, which is guaranteed to work on all Cortex-A{8, 9}.
|
||||
|
||||
Note that this option is also safe to use for newer cores
|
||||
that have a VFPv4 unit, because VFPv4 is backward compatible
|
||||
with VFPv3. They must of course also have 32
|
||||
double-precision registers.
|
||||
|
||||
config BR2_ARM_FPU_VFPV3D16
|
||||
bool "VFPv3-D16"
|
||||
depends on BR2_ARM_CPU_HAS_VFPV3 || BR2_ARM_CPU_MAYBE_HAS_VFPV3
|
||||
help
|
||||
This option allows to use the VFPv3 floating point unit, as
|
||||
available in some ARMv7 processors (Cortex-A{8, 9}). This
|
||||
option requires a VFPv3 unit that has 16 double-precision
|
||||
registers, which is generally the case in all SOCs based on
|
||||
Cortex-A{8, 9}, even though VFPv3 is technically optional on
|
||||
Cortex-A9. This is the safest option for those cores.
|
||||
|
||||
Note that this option is also safe to use for newer cores
|
||||
such that have a VFPv4 unit, because the VFPv4 is backward
|
||||
compatible with VFPv3.
|
||||
|
||||
config BR2_ARM_FPU_VFPV4
|
||||
bool "VFPv4"
|
||||
depends on BR2_ARM_CPU_HAS_VFPV4 || BR2_ARM_CPU_MAYBE_HAS_VFPV4
|
||||
help
|
||||
This option allows to use the VFPv4 floating point unit, as
|
||||
available in some ARMv7 processors (Cortex-A{5, 7, 12,
|
||||
15}). This option requires a VFPv4 unit that has 32
|
||||
double-precision registers, which is not necessarily the
|
||||
case in all SOCs based on Cortex-A{5, 7, 12, 15}. If you're
|
||||
unsure, you should probably use VFPv4-D16 instead.
|
||||
|
||||
Note that if you want binary code that works on all ARMv7
|
||||
cores, including the earlier Cortex-A{8, 9}, you should
|
||||
instead select VFPv3.
|
||||
|
||||
config BR2_ARM_FPU_VFPV4D16
|
||||
bool "VFPv4-D16"
|
||||
depends on BR2_ARM_CPU_HAS_VFPV4 || BR2_ARM_CPU_MAYBE_HAS_VFPV4
|
||||
help
|
||||
This option allows to use the VFPv4 floating point unit, as
|
||||
available in some ARMv7 processors (Cortex-A{5, 7, 12,
|
||||
15}). This option requires a VFPv4 unit that has 16
|
||||
double-precision registers, which is always available on
|
||||
Cortex-A12 and Cortex-A15, but optional on Cortex-A5 and
|
||||
Cortex-A7.
|
||||
|
||||
Note that if you want binary code that works on all ARMv7
|
||||
cores, including the earlier Cortex-A{8, 9}, you should
|
||||
instead select VFPv3-D16.
|
||||
|
||||
config BR2_ARM_FPU_NEON
|
||||
bool "NEON"
|
||||
depends on BR2_ARM_CPU_HAS_NEON
|
||||
help
|
||||
This option allows to use the NEON SIMD unit, as available
|
||||
in some ARMv7 processors, as a floating-point unit. It
|
||||
should however be noted that using NEON for floating point
|
||||
operations doesn't provide a complete compatibility with the
|
||||
IEEE 754.
|
||||
|
||||
config BR2_ARM_FPU_NEON_VFPV4
|
||||
bool "NEON/VFPv4"
|
||||
depends on BR2_ARM_CPU_HAS_VFPV4 || BR2_ARM_CPU_MAYBE_HAS_VFPV4
|
||||
depends on BR2_ARM_CPU_HAS_NEON
|
||||
help
|
||||
This option allows to use both the VFPv4 and the NEON SIMD
|
||||
units for floating point operations. Note that some ARMv7
|
||||
cores do not necessarily have VFPv4 and/or NEON support, for
|
||||
example on Cortex-A5 and Cortex-A7, support for VFPv4 and
|
||||
NEON is optional.
|
||||
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "ARM instruction set"
|
||||
depends on BR2_ARM_CPU_HAS_THUMB || BR2_ARM_CPU_HAS_THUMB2
|
||||
|
||||
config BR2_ARM_INSTRUCTIONS_ARM_CHOICE
|
||||
bool "ARM"
|
||||
help
|
||||
This option instructs the compiler to generate regular ARM
|
||||
instructions, that are all 32 bits wide.
|
||||
|
||||
config BR2_ARM_INSTRUCTIONS_THUMB
|
||||
bool "Thumb"
|
||||
depends on BR2_ARM_CPU_HAS_THUMB
|
||||
help
|
||||
This option instructions the compiler to generate Thumb
|
||||
instructions, which allows to mix 16 bits instructions and
|
||||
32 bits instructions. This generally provides a much smaller
|
||||
compiled binary size.
|
||||
|
||||
config BR2_ARM_INSTRUCTIONS_THUMB2
|
||||
bool "Thumb2"
|
||||
depends on BR2_ARM_CPU_HAS_THUMB2
|
||||
help
|
||||
This option instructions the compiler to generate Thumb2
|
||||
instructions, which allows to mix 16 bits instructions and
|
||||
32 bits instructions. This generally provides a much smaller
|
||||
compiled binary size.
|
||||
|
||||
endchoice
|
||||
|
||||
config BR2_ARM_INSTRUCTIONS_ARM
|
||||
def_bool y
|
||||
depends on !(BR2_ARM_INSTRUCTIONS_THUMB || BR2_ARM_INSTRUCTIONS_THUMB2)
|
||||
|
||||
config BR2_ARCH
|
||||
default "arm" if BR2_arm
|
||||
default "armeb" if BR2_armeb
|
||||
|
||||
config BR2_ENDIAN
|
||||
default "LITTLE" if BR2_arm
|
||||
default "BIG" if BR2_armeb
|
||||
|
||||
config BR2_ARCH_HAS_ATOMICS
|
||||
default y
|
||||
|
||||
config BR2_GCC_TARGET_CPU
|
||||
default "arm920t" if BR2_arm920t
|
||||
default "arm922t" if BR2_arm922t
|
||||
default "arm926ej-s" if BR2_arm926t
|
||||
default "arm1136j-s" if BR2_arm1136j_s
|
||||
default "arm1136jf-s" if BR2_arm1136jf_s
|
||||
default "arm1176jz-s" if BR2_arm1176jz_s
|
||||
default "arm1176jzf-s" if BR2_arm1176jzf_s
|
||||
default "cortex-a5" if BR2_cortex_a5
|
||||
default "cortex-a7" if BR2_cortex_a7
|
||||
default "cortex-a8" if BR2_cortex_a8
|
||||
default "cortex-a9" if BR2_cortex_a9
|
||||
default "cortex-a12" if BR2_cortex_a12
|
||||
default "cortex-a15" if BR2_cortex_a15
|
||||
default "fa526" if BR2_fa526
|
||||
default "marvell-pj4" if BR2_pj4
|
||||
default "strongarm" if BR2_strongarm
|
||||
default "xscale" if BR2_xscale
|
||||
default "iwmmxt" if BR2_iwmmxt
|
||||
|
||||
config BR2_GCC_TARGET_ABI
|
||||
default "aapcs-linux"
|
||||
|
||||
config BR2_GCC_TARGET_FPU
|
||||
default "vfp" if BR2_ARM_FPU_VFPV2
|
||||
default "vfpv3" if BR2_ARM_FPU_VFPV3
|
||||
default "vfpv3-d16" if BR2_ARM_FPU_VFPV3D16
|
||||
default "vfpv4" if BR2_ARM_FPU_VFPV4
|
||||
default "vfpv4-d16" if BR2_ARM_FPU_VFPV4D16
|
||||
default "neon" if BR2_ARM_FPU_NEON
|
||||
default "neon-vfpv4" if BR2_ARM_FPU_NEON_VFPV4
|
||||
|
||||
config BR2_GCC_TARGET_FLOAT_ABI
|
||||
default "soft" if BR2_ARM_SOFT_FLOAT
|
||||
default "softfp" if !BR2_ARM_SOFT_FLOAT && BR2_ARM_EABI
|
||||
default "hard" if !BR2_ARM_SOFT_FLOAT && BR2_ARM_EABIHF
|
||||
|
||||
config BR2_GCC_TARGET_MODE
|
||||
default "arm" if BR2_ARM_INSTRUCTIONS_ARM
|
||||
default "thumb" if BR2_ARM_INSTRUCTIONS_THUMB || BR2_ARM_INSTRUCTIONS_THUMB2
|
|
@ -0,0 +1,11 @@
|
|||
config BR2_ARCH
|
||||
default "avr32"
|
||||
|
||||
config BR2_ENDIAN
|
||||
default "BIG"
|
||||
|
||||
config BR2_GCC_TARGET_ARCH
|
||||
default "ap"
|
||||
|
||||
config BR2_ARCH_HAS_ATOMICS
|
||||
default y
|
|
@ -0,0 +1,110 @@
|
|||
choice
|
||||
prompt "Target CPU"
|
||||
depends on BR2_bfin
|
||||
default BR2_bf609
|
||||
help
|
||||
Specify target CPU
|
||||
config BR2_bf606
|
||||
bool "bf606"
|
||||
config BR2_bf607
|
||||
bool "bf607"
|
||||
config BR2_bf608
|
||||
bool "bf608"
|
||||
config BR2_bf609
|
||||
bool "bf609"
|
||||
config BR2_bf512
|
||||
bool "bf512"
|
||||
config BR2_bf514
|
||||
bool "bf514"
|
||||
config BR2_bf516
|
||||
bool "bf516"
|
||||
config BR2_bf518
|
||||
bool "bf518"
|
||||
config BR2_bf522
|
||||
bool "bf522"
|
||||
config BR2_bf523
|
||||
bool "bf523"
|
||||
config BR2_bf524
|
||||
bool "bf524"
|
||||
config BR2_bf525
|
||||
bool "bf525"
|
||||
config BR2_bf526
|
||||
bool "bf526"
|
||||
config BR2_bf527
|
||||
bool "bf527"
|
||||
config BR2_bf531
|
||||
bool "bf531"
|
||||
config BR2_bf532
|
||||
bool "bf532"
|
||||
config BR2_bf533
|
||||
bool "bf533"
|
||||
config BR2_bf534
|
||||
bool "bf534"
|
||||
config BR2_bf536
|
||||
bool "bf536"
|
||||
config BR2_bf537
|
||||
bool "bf537"
|
||||
config BR2_bf538
|
||||
bool "bf538"
|
||||
config BR2_bf539
|
||||
bool "bf539"
|
||||
config BR2_bf542
|
||||
bool "bf542"
|
||||
config BR2_bf544
|
||||
bool "bf544"
|
||||
config BR2_bf547
|
||||
bool "bf547"
|
||||
config BR2_bf548
|
||||
bool "bf548"
|
||||
config BR2_bf549
|
||||
bool "bf549"
|
||||
config BR2_bf561
|
||||
bool "bf561"
|
||||
endchoice
|
||||
|
||||
config BR2_ARCH
|
||||
default "bfin"
|
||||
|
||||
config BR2_ENDIAN
|
||||
default "LITTLE"
|
||||
|
||||
config BR2_ARCH_HAS_ATOMICS
|
||||
default y
|
||||
|
||||
config BR2_GCC_TARGET_CPU
|
||||
default bf606 if BR2_bf606
|
||||
default bf607 if BR2_bf607
|
||||
default bf608 if BR2_bf608
|
||||
default bf609 if BR2_bf609
|
||||
default bf512 if BR2_bf512
|
||||
default bf514 if BR2_bf514
|
||||
default bf516 if BR2_bf516
|
||||
default bf518 if BR2_bf518
|
||||
default bf522 if BR2_bf522
|
||||
default bf523 if BR2_bf523
|
||||
default bf524 if BR2_bf524
|
||||
default bf525 if BR2_bf525
|
||||
default bf526 if BR2_bf526
|
||||
default bf527 if BR2_bf527
|
||||
default bf531 if BR2_bf531
|
||||
default bf532 if BR2_bf532
|
||||
default bf533 if BR2_bf533
|
||||
default bf534 if BR2_bf534
|
||||
default bf536 if BR2_bf536
|
||||
default bf537 if BR2_bf537
|
||||
default bf538 if BR2_bf538
|
||||
default bf539 if BR2_bf539
|
||||
default bf542 if BR2_bf542
|
||||
default bf544 if BR2_bf544
|
||||
default bf547 if BR2_bf547
|
||||
default bf548 if BR2_bf548
|
||||
default bf549 if BR2_bf549
|
||||
default bf561 if BR2_bf561
|
||||
|
||||
config BR2_GCC_TARGET_CPU_REVISION
|
||||
string "Target CPU revision"
|
||||
help
|
||||
Specify a target CPU revision, which will be appended to the
|
||||
value of the -mcpu option. For example, if the selected CPU is
|
||||
bf609, and then selected CPU revision is "0.0", then gcc will
|
||||
receive the -mcpu=bf609-0.0 option.
|
|
@ -0,0 +1,16 @@
|
|||
config BR2_ARCH
|
||||
default "m68k" if BR2_m68k
|
||||
|
||||
config BR2_ENDIAN
|
||||
default "BIG"
|
||||
|
||||
config BR2_ARCH_HAS_ATOMICS
|
||||
default y
|
||||
|
||||
config BR2_GCC_TARGET_ARCH
|
||||
default "68000" if BR2_m68k_68000
|
||||
default "68010" if BR2_m68k_68010
|
||||
default "68020" if BR2_m68k_68020
|
||||
default "68030" if BR2_m68k_68030
|
||||
default "68040" if BR2_m68k_68040
|
||||
default "68060" if BR2_m68k_68060
|
|
@ -0,0 +1,14 @@
|
|||
config BR2_ARCH
|
||||
default "microblazeel" if BR2_microblazeel
|
||||
default "microblaze" if BR2_microblazebe
|
||||
|
||||
config BR2_ENDIAN
|
||||
default "LITTLE" if BR2_microblazeel
|
||||
default "BIG" if BR2_microblazebe
|
||||
|
||||
config BR2_microblaze
|
||||
bool
|
||||
default y if BR2_microblazeel || BR2_microblazebe
|
||||
|
||||
config BR2_ARCH_HAS_ATOMICS
|
||||
default y
|
|
@ -0,0 +1,84 @@
|
|||
choice
|
||||
prompt "Target Architecture Variant"
|
||||
depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
|
||||
default BR2_mips_32 if BR2_mips || BR2_mipsel
|
||||
default BR2_mips_64 if BR2_mips64 || BR2_mips64el
|
||||
help
|
||||
Specific CPU variant to use
|
||||
|
||||
64bit cabable: 3, 4, 64, 64r2
|
||||
non-64bit capable: 1, 2, 32, 32r2
|
||||
|
||||
config BR2_mips_32
|
||||
bool "mips 32"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_mips_32r2
|
||||
bool "mips 32r2"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_mips_64
|
||||
bool "mips 64"
|
||||
depends on BR2_ARCH_IS_64
|
||||
config BR2_mips_64r2
|
||||
bool "mips 64r2"
|
||||
depends on BR2_ARCH_IS_64
|
||||
endchoice
|
||||
|
||||
|
||||
choice
|
||||
prompt "Target ABI"
|
||||
depends on BR2_mips64 || BR2_mips64el
|
||||
default BR2_MIPS_NABI32
|
||||
|
||||
help
|
||||
Application Binary Interface to use
|
||||
|
||||
config BR2_MIPS_NABI32
|
||||
bool "n32"
|
||||
depends on BR2_ARCH_IS_64
|
||||
select BR2_KERNEL_64_USERLAND_32
|
||||
config BR2_MIPS_NABI64
|
||||
bool "n64"
|
||||
depends on BR2_ARCH_IS_64
|
||||
endchoice
|
||||
|
||||
config BR2_MIPS_SOFT_FLOAT
|
||||
bool "Use soft-float"
|
||||
default y
|
||||
select BR2_SOFT_FLOAT
|
||||
help
|
||||
If your target CPU does not have a Floating Point Unit (FPU)
|
||||
or a kernel FPU emulator, but you still wish to support
|
||||
floating point functions, then everything will need to be
|
||||
compiled with soft floating point support (-msoft-float).
|
||||
|
||||
config BR2_ARCH
|
||||
default "mips" if BR2_mips
|
||||
default "mipsel" if BR2_mipsel
|
||||
default "mips64" if BR2_mips64
|
||||
default "mips64el" if BR2_mips64el
|
||||
|
||||
config BR2_ENDIAN
|
||||
default "LITTLE" if BR2_mipsel || BR2_mips64el
|
||||
default "BIG" if BR2_mips || BR2_mips64
|
||||
|
||||
config BR2_ARCH_HAS_ATOMICS
|
||||
default y
|
||||
|
||||
config BR2_GCC_TARGET_ARCH
|
||||
default "mips1" if BR2_mips_1
|
||||
default "mips2" if BR2_mips_2
|
||||
default "mips3" if BR2_mips_3
|
||||
default "mips4" if BR2_mips_4
|
||||
default "mips32" if BR2_mips_32
|
||||
default "mips32r2" if BR2_mips_32r2
|
||||
default "mips64" if BR2_mips_64
|
||||
default "mips64r2" if BR2_mips_64r2
|
||||
|
||||
config BR2_MIPS_OABI32
|
||||
bool
|
||||
default y if BR2_mips || BR2_mipsel
|
||||
|
||||
config BR2_GCC_TARGET_ABI
|
||||
default "32" if BR2_MIPS_OABI32
|
||||
default "n32" if BR2_MIPS_NABI32
|
||||
default "64" if BR2_MIPS_NABI64
|
|
@ -0,0 +1,8 @@
|
|||
config BR2_ARCH
|
||||
default "nios2"
|
||||
|
||||
config BR2_ENDIAN
|
||||
default "LITTLE"
|
||||
|
||||
config BR2_ARCH_HAS_ATOMICS
|
||||
default y
|
|
@ -0,0 +1,215 @@
|
|||
config BR2_POWERPC_CPU_HAS_ALTIVEC
|
||||
bool
|
||||
|
||||
config BR2_POWERPC_CPU_HAS_SPE
|
||||
bool
|
||||
|
||||
choice
|
||||
prompt "Target Architecture Variant"
|
||||
default BR2_generic_powerpc
|
||||
help
|
||||
Specific CPU variant to use
|
||||
config BR2_generic_powerpc
|
||||
bool "generic"
|
||||
config BR2_powerpc_401
|
||||
bool "401"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_403
|
||||
bool "403"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_405
|
||||
bool "405"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_405fp
|
||||
bool "405 with FPU"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_440
|
||||
bool "440"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_440fp
|
||||
bool "440 with FPU"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_464
|
||||
bool "464"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_464fp
|
||||
bool "464 with FPU"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_476
|
||||
bool "476"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_476fp
|
||||
bool "476 with FPU"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_505
|
||||
bool "505"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_601
|
||||
bool "601"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_602
|
||||
bool "602"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_603
|
||||
bool "603"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_603e
|
||||
bool "603e"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_604
|
||||
bool "604"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_604e
|
||||
bool "604e"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_620
|
||||
bool "620"
|
||||
config BR2_powerpc_630
|
||||
bool "630"
|
||||
config BR2_powerpc_740
|
||||
bool "740"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_7400
|
||||
bool "7400"
|
||||
select BR2_POWERPC_CPU_HAS_ALTIVEC
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_7450
|
||||
bool "7450"
|
||||
select BR2_POWERPC_CPU_HAS_ALTIVEC
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_750
|
||||
bool "750"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_821
|
||||
bool "821"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_823
|
||||
bool "823"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_860
|
||||
bool "860"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_970
|
||||
bool "970"
|
||||
select BR2_POWERPC_CPU_HAS_ALTIVEC
|
||||
config BR2_powerpc_8540
|
||||
bool "8540 / e500v1"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
select BR2_POWERPC_CPU_HAS_SPE
|
||||
config BR2_powerpc_8548
|
||||
bool "8548 / e500v2"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
select BR2_POWERPC_CPU_HAS_SPE
|
||||
config BR2_powerpc_e300c2
|
||||
bool "e300c2"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_e300c3
|
||||
bool "e300c3"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_e500mc
|
||||
bool "e500mc"
|
||||
depends on !BR2_ARCH_IS_64
|
||||
config BR2_powerpc_e5500
|
||||
bool "e5500"
|
||||
depends on !BR2_powerpc64le
|
||||
config BR2_powerpc_e6500
|
||||
bool "e6500"
|
||||
depends on !BR2_powerpc64le
|
||||
select BR2_POWERPC_CPU_HAS_ALTIVEC
|
||||
config BR2_powerpc_power4
|
||||
bool "power4"
|
||||
config BR2_powerpc_power5
|
||||
bool "power5"
|
||||
config BR2_powerpc_power6
|
||||
bool "power6"
|
||||
select BR2_POWERPC_CPU_HAS_ALTIVEC
|
||||
config BR2_powerpc_power7
|
||||
bool "power7"
|
||||
select BR2_POWERPC_CPU_HAS_ALTIVEC
|
||||
config BR2_powerpc_power8
|
||||
bool "power8"
|
||||
select BR2_POWERPC_CPU_HAS_ALTIVEC
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "Target ABI"
|
||||
default BR2_powerpc_SPE if BR2_POWERPC_CPU_HAS_SPE
|
||||
default BR2_powerpc_CLASSIC
|
||||
help
|
||||
Application Binary Interface to use
|
||||
|
||||
config BR2_powerpc_CLASSIC
|
||||
bool "Classic"
|
||||
depends on !BR2_POWERPC_CPU_HAS_SPE
|
||||
config BR2_powerpc_SPE
|
||||
bool "SPE"
|
||||
depends on BR2_POWERPC_CPU_HAS_SPE
|
||||
endchoice
|
||||
|
||||
config BR2_POWERPC_SOFT_FLOAT
|
||||
bool "Use soft-float"
|
||||
select BR2_SOFT_FLOAT
|
||||
help
|
||||
If your target CPU does not have a Floating Point Unit (FPU)
|
||||
or a kernel FPU emulator, but you still wish to support
|
||||
floating point functions, then everything will need to be
|
||||
compiled with soft floating point support (-msoft-float).
|
||||
|
||||
config BR2_ARCH
|
||||
default "powerpc" if BR2_powerpc
|
||||
default "powerpc64" if BR2_powerpc64
|
||||
default "powerpc64le" if BR2_powerpc64le
|
||||
|
||||
config BR2_ENDIAN
|
||||
default "BIG" if BR2_powerpc || BR2_powerpc64
|
||||
default "LITTLE" if BR2_powerpc64le
|
||||
|
||||
config BR2_ARCH_HAS_ATOMICS
|
||||
default y
|
||||
|
||||
config BR2_GCC_TARGET_CPU
|
||||
default "401" if BR2_powerpc_401
|
||||
default "403" if BR2_powerpc_403
|
||||
default "405" if BR2_powerpc_405
|
||||
default "405fp" if BR2_powerpc_405fp
|
||||
default "440" if BR2_powerpc_440
|
||||
default "440fp" if BR2_powerpc_440fp
|
||||
default "464" if BR2_powerpc_464
|
||||
default "464fp" if BR2_powerpc_464fp
|
||||
default "476" if BR2_powerpc_476
|
||||
default "476fp" if BR2_powerpc_476fp
|
||||
default "505" if BR2_powerpc_505
|
||||
default "601" if BR2_powerpc_601
|
||||
default "602" if BR2_powerpc_602
|
||||
default "603" if BR2_powerpc_603
|
||||
default "603e" if BR2_powerpc_603e
|
||||
default "604" if BR2_powerpc_604
|
||||
default "604e" if BR2_powerpc_604e
|
||||
default "620" if BR2_powerpc_620
|
||||
default "630" if BR2_powerpc_630
|
||||
default "740" if BR2_powerpc_740
|
||||
default "7400" if BR2_powerpc_7400
|
||||
default "7450" if BR2_powerpc_7450
|
||||
default "750" if BR2_powerpc_750
|
||||
default "821" if BR2_powerpc_821
|
||||
default "823" if BR2_powerpc_823
|
||||
default "860" if BR2_powerpc_860
|
||||
default "970" if BR2_powerpc_970
|
||||
default "8540" if BR2_powerpc_8540
|
||||
default "8548" if BR2_powerpc_8548
|
||||
default "e300c2" if BR2_powerpc_e300c2
|
||||
default "e300c3" if BR2_powerpc_e300c3
|
||||
default "e500mc" if BR2_powerpc_e500mc
|
||||
default "power4" if BR2_powerpc_power4
|
||||
default "power5" if BR2_powerpc_power5
|
||||
default "power6" if BR2_powerpc_power6
|
||||
default "power7" if BR2_powerpc_power7
|
||||
default "power8" if BR2_powerpc_power8
|
||||
|
||||
config BR2_GCC_TARGET_ABI
|
||||
default "altivec" if BR2_PPC_ABI_altivec
|
||||
default "no-altivec" if BR2_PPC_ABI_no-altivec
|
||||
default "spe" if BR2_PPC_ABI_spe
|
||||
default "no-spe" if BR2_PPC_ABI_no-spe
|
||||
default "ibmlongdouble" if BR2_PPC_ABI_ibmlongdouble
|
||||
default "ieeelongdouble" if BR2_PPC_ABI_ieeelongdouble
|
|
@ -0,0 +1,33 @@
|
|||
choice
|
||||
prompt "Target Architecture Variant"
|
||||
depends on BR2_sh
|
||||
default BR2_sh4
|
||||
help
|
||||
Specific CPU variant to use
|
||||
|
||||
config BR2_sh2a
|
||||
bool "sh2a (SH2A big endian)"
|
||||
config BR2_sh4
|
||||
bool "sh4 (SH4 little endian)"
|
||||
config BR2_sh4eb
|
||||
bool "sh4eb (SH4 big endian)"
|
||||
config BR2_sh4a
|
||||
bool "sh4a (SH4A little endian)"
|
||||
config BR2_sh4aeb
|
||||
bool "sh4aeb (SH4A big endian)"
|
||||
endchoice
|
||||
|
||||
config BR2_ARCH
|
||||
default "sh2a" if BR2_sh2a
|
||||
default "sh4" if BR2_sh4
|
||||
default "sh4eb" if BR2_sh4eb
|
||||
default "sh4a" if BR2_sh4a
|
||||
default "sh4aeb" if BR2_sh4aeb
|
||||
default "sh64" if BR2_sh64
|
||||
|
||||
config BR2_ENDIAN
|
||||
default "LITTLE" if BR2_sh4 || BR2_sh4a || BR2_sh64
|
||||
default "BIG" if BR2_sh2a || BR2_sh4eb || BR2_sh4aeb
|
||||
|
||||
config BR2_ARCH_HAS_ATOMICS
|
||||
default y
|
|
@ -0,0 +1,25 @@
|
|||
choice
|
||||
prompt "Target Architecture Variant"
|
||||
depends on BR2_sparc
|
||||
default BR2_sparc_v8
|
||||
help
|
||||
Specific CPU variant to use
|
||||
|
||||
config BR2_sparc_v8
|
||||
bool "v8"
|
||||
config BR2_sparc_leon3
|
||||
bool "leon3"
|
||||
endchoice
|
||||
|
||||
config BR2_ARCH
|
||||
default "sparc" if BR2_sparc
|
||||
|
||||
config BR2_ENDIAN
|
||||
default "BIG"
|
||||
|
||||
config BR2_ARCH_HAS_ATOMICS
|
||||
default y
|
||||
|
||||
config BR2_GCC_TARGET_CPU
|
||||
default "leon3" if BR2_sparc_leon3
|
||||
default "v8" if BR2_sparc_v8
|
|
@ -0,0 +1,232 @@
|
|||
# i386/x86_64 cpu features
|
||||
config BR2_X86_CPU_HAS_MMX
|
||||
bool
|
||||
config BR2_X86_CPU_HAS_SSE
|
||||
bool
|
||||
config BR2_X86_CPU_HAS_SSE2
|
||||
bool
|
||||
config BR2_X86_CPU_HAS_SSE3
|
||||
bool
|
||||
config BR2_X86_CPU_HAS_SSSE3
|
||||
bool
|
||||
config BR2_X86_CPU_HAS_SSE4
|
||||
bool
|
||||
config BR2_X86_CPU_HAS_SSE42
|
||||
bool
|
||||
|
||||
choice
|
||||
prompt "Target Architecture Variant"
|
||||
depends on BR2_i386 || BR2_x86_64
|
||||
default BR2_x86_i586 if BR2_i386
|
||||
help
|
||||
Specific CPU variant to use
|
||||
|
||||
config BR2_x86_i386
|
||||
bool "i386"
|
||||
depends on !BR2_x86_64
|
||||
config BR2_x86_i486
|
||||
bool "i486"
|
||||
depends on !BR2_x86_64
|
||||
config BR2_x86_i586
|
||||
bool "i586"
|
||||
depends on !BR2_x86_64
|
||||
config BR2_x86_i686
|
||||
bool "i686"
|
||||
depends on !BR2_x86_64
|
||||
config BR2_x86_pentiumpro
|
||||
bool "pentium pro"
|
||||
depends on !BR2_x86_64
|
||||
config BR2_x86_pentium_mmx
|
||||
bool "pentium MMX"
|
||||
select BR2_X86_CPU_HAS_MMX
|
||||
depends on !BR2_x86_64
|
||||
config BR2_x86_pentium_m
|
||||
bool "pentium mobile"
|
||||
select BR2_X86_CPU_HAS_MMX
|
||||
select BR2_X86_CPU_HAS_SSE
|
||||
depends on !BR2_x86_64
|
||||
config BR2_x86_pentium2
|
||||
bool "pentium2"
|
||||
select BR2_X86_CPU_HAS_MMX
|
||||
depends on !BR2_x86_64
|
||||
config BR2_x86_pentium3
|
||||
bool "pentium3"
|
||||
select BR2_X86_CPU_HAS_MMX
|
||||
select BR2_X86_CPU_HAS_SSE
|
||||
depends on !BR2_x86_64
|
||||
config BR2_x86_pentium4
|
||||
bool "pentium4"
|
||||
select BR2_X86_CPU_HAS_MMX
|
||||
select BR2_X86_CPU_HAS_SSE
|
||||
select BR2_X86_CPU_HAS_SSE2
|
||||
depends on !BR2_x86_64
|
||||
config BR2_x86_prescott
|
||||
bool "prescott"
|
||||
select BR2_X86_CPU_HAS_MMX
|
||||
select BR2_X86_CPU_HAS_SSE
|
||||
select BR2_X86_CPU_HAS_SSE2
|
||||
select BR2_X86_CPU_HAS_SSE3
|
||||
depends on !BR2_x86_64
|
||||
config BR2_x86_nocona
|
||||
bool "nocona"
|
||||
select BR2_X86_CPU_HAS_MMX
|
||||
select BR2_X86_CPU_HAS_SSE
|
||||
select BR2_X86_CPU_HAS_SSE2
|
||||
select BR2_X86_CPU_HAS_SSE3
|
||||
config BR2_x86_core2
|
||||
bool "core2"
|
||||
select BR2_X86_CPU_HAS_MMX
|
||||
select BR2_X86_CPU_HAS_SSE
|
||||
select BR2_X86_CPU_HAS_SSE2
|
||||
select BR2_X86_CPU_HAS_SSE3
|
||||
select BR2_X86_CPU_HAS_SSSE3
|
||||
config BR2_x86_corei7
|
||||
bool "corei7"
|
||||
select BR2_X86_CPU_HAS_MMX
|
||||
select BR2_X86_CPU_HAS_SSE
|
||||
select BR2_X86_CPU_HAS_SSE2
|
||||
select BR2_X86_CPU_HAS_SSE3
|
||||
select BR2_X86_CPU_HAS_SSSE3
|
||||
select BR2_X86_CPU_HAS_SSE4
|
||||
select BR2_X86_CPU_HAS_SSE42
|
||||
config BR2_x86_atom
|
||||
bool "atom"
|
||||
select BR2_X86_CPU_HAS_MMX
|
||||
select BR2_X86_CPU_HAS_SSE
|
||||
select BR2_X86_CPU_HAS_SSE2
|
||||
select BR2_X86_CPU_HAS_SSE3
|
||||
select BR2_X86_CPU_HAS_SSSE3
|
||||
config BR2_x86_k6
|
||||
bool "k6"
|
||||
select BR2_X86_CPU_HAS_MMX
|
||||
depends on !BR2_x86_64
|
||||
config BR2_x86_k6_2
|
||||
bool "k6-2"
|
||||
select BR2_X86_CPU_HAS_MMX
|
||||
depends on !BR2_x86_64
|
||||
config BR2_x86_athlon
|
||||
bool "athlon"
|
||||
select BR2_X86_CPU_HAS_MMX
|
||||
depends on !BR2_x86_64
|
||||
config BR2_x86_athlon_4
|
||||
bool "athlon-4"
|
||||
select BR2_X86_CPU_HAS_MMX
|
||||
select BR2_X86_CPU_HAS_SSE
|
||||
depends on !BR2_x86_64
|
||||
config BR2_x86_opteron
|
||||
bool "opteron"
|
||||
select BR2_X86_CPU_HAS_MMX
|
||||
select BR2_X86_CPU_HAS_SSE
|
||||
select BR2_X86_CPU_HAS_SSE2
|
||||
config BR2_x86_opteron_sse3
|
||||
bool "opteron w/ SSE3"
|
||||
select BR2_X86_CPU_HAS_MMX
|
||||
select BR2_X86_CPU_HAS_SSE
|
||||
select BR2_X86_CPU_HAS_SSE2
|
||||
select BR2_X86_CPU_HAS_SSE3
|
||||
config BR2_x86_barcelona
|
||||
bool "barcelona"
|
||||
select BR2_X86_CPU_HAS_MMX
|
||||
select BR2_X86_CPU_HAS_SSE
|
||||
select BR2_X86_CPU_HAS_SSE2
|
||||
select BR2_X86_CPU_HAS_SSE3
|
||||
config BR2_x86_jaguar
|
||||
bool "jaguar"
|
||||
select BR2_X86_CPU_HAS_MMX
|
||||
select BR2_X86_CPU_HAS_SSE
|
||||
select BR2_X86_CPU_HAS_SSE2
|
||||
select BR2_X86_CPU_HAS_SSE3
|
||||
select BR2_X86_CPU_HAS_SSSE3
|
||||
select BR2_X86_CPU_HAS_SSE4
|
||||
select BR2_X86_CPU_HAS_SSE42
|
||||
config BR2_x86_geode
|
||||
bool "geode"
|
||||
# Don't include MMX support because there several variant of geode
|
||||
# processor, some with MMX support, some without.
|
||||
# See: http://en.wikipedia.org/wiki/Geode_%28processor%29
|
||||
depends on !BR2_x86_64
|
||||
config BR2_x86_c3
|
||||
bool "Via/Cyrix C3 (Samuel/Ezra cores)"
|
||||
select BR2_X86_CPU_HAS_MMX
|
||||
depends on !BR2_x86_64
|
||||
config BR2_x86_c32
|
||||
bool "Via C3-2 (Nehemiah cores)"
|
||||
select BR2_X86_CPU_HAS_MMX
|
||||
select BR2_X86_CPU_HAS_SSE
|
||||
depends on !BR2_x86_64
|
||||
config BR2_x86_winchip_c6
|
||||
bool "IDT Winchip C6"
|
||||
select BR2_X86_CPU_HAS_MMX
|
||||
depends on !BR2_x86_64
|
||||
config BR2_x86_winchip2
|
||||
bool "IDT Winchip 2"
|
||||
select BR2_X86_CPU_HAS_MMX
|
||||
depends on !BR2_x86_64
|
||||
endchoice
|
||||
|
||||
config BR2_ARCH
|
||||
default "i386" if BR2_x86_i386
|
||||
default "i486" if BR2_x86_i486
|
||||
default "i586" if BR2_x86_i586
|
||||
default "i586" if BR2_x86_pentium_mmx
|
||||
default "i586" if BR2_x86_geode
|
||||
default "i586" if BR2_x86_c3
|
||||
default "i686" if BR2_x86_c32
|
||||
default "i586" if BR2_x86_winchip_c6
|
||||
default "i586" if BR2_x86_winchip2
|
||||
default "i686" if BR2_x86_i686
|
||||
default "i686" if BR2_x86_pentium2
|
||||
default "i686" if BR2_x86_pentium3
|
||||
default "i686" if BR2_x86_pentium4
|
||||
default "i686" if BR2_x86_pentium_m
|
||||
default "i686" if BR2_x86_pentiumpro
|
||||
default "i686" if BR2_x86_prescott
|
||||
default "i686" if BR2_x86_nocona && BR2_i386
|
||||
default "i686" if BR2_x86_core2 && BR2_i386
|
||||
default "i686" if BR2_x86_corei7 && BR2_i386
|
||||
default "i686" if BR2_x86_atom && BR2_i386
|
||||
default "i686" if BR2_x86_opteron && BR2_i386
|
||||
default "i686" if BR2_x86_opteron_sse3 && BR2_i386
|
||||
default "i686" if BR2_x86_barcelona && BR2_i386
|
||||
default "i686" if BR2_x86_jaguar && BR2_i386
|
||||
default "i686" if BR2_x86_k6
|
||||
default "i686" if BR2_x86_k6_2
|
||||
default "i686" if BR2_x86_athlon
|
||||
default "i686" if BR2_x86_athlon_4
|
||||
default "x86_64" if BR2_x86_64
|
||||
|
||||
config BR2_ENDIAN
|
||||
default "LITTLE"
|
||||
|
||||
config BR2_ARCH_HAS_ATOMICS
|
||||
default y if !BR2_x86_i386
|
||||
|
||||
config BR2_GCC_TARGET_ARCH
|
||||
default "i386" if BR2_x86_i386
|
||||
default "i486" if BR2_x86_i486
|
||||
default "i586" if BR2_x86_i586
|
||||
default "pentium-mmx" if BR2_x86_pentium_mmx
|
||||
default "i686" if BR2_x86_i686
|
||||
default "pentiumpro" if BR2_x86_pentiumpro
|
||||
default "pentium-m" if BR2_x86_pentium_m
|
||||
default "pentium2" if BR2_x86_pentium2
|
||||
default "pentium3" if BR2_x86_pentium3
|
||||
default "pentium4" if BR2_x86_pentium4
|
||||
default "prescott" if BR2_x86_prescott
|
||||
default "nocona" if BR2_x86_nocona
|
||||
default "core2" if BR2_x86_core2
|
||||
default "corei7" if BR2_x86_corei7
|
||||
default "atom" if BR2_x86_atom
|
||||
default "k8" if BR2_x86_opteron
|
||||
default "k8-sse3" if BR2_x86_opteron_sse3
|
||||
default "barcelona" if BR2_x86_barcelona
|
||||
default "btver2" if BR2_x86_jaguar
|
||||
default "k6" if BR2_x86_k6
|
||||
default "k6-2" if BR2_x86_k6_2
|
||||
default "athlon" if BR2_x86_athlon
|
||||
default "athlon-4" if BR2_x86_athlon_4
|
||||
default "winchip-c6" if BR2_x86_winchip_c6
|
||||
default "winchip2" if BR2_x86_winchip2
|
||||
default "c3" if BR2_x86_c3
|
||||
default "c3-2" if BR2_x86_c32
|
||||
default "geode" if BR2_x86_geode
|
|
@ -0,0 +1,40 @@
|
|||
choice
|
||||
prompt "Target Architecture Variant"
|
||||
depends on BR2_xtensa
|
||||
default BR2_xtensa_fsf
|
||||
config BR2_XTENSA_CUSTOM
|
||||
bool "Custom Xtensa processor configuration"
|
||||
config BR2_xtensa_fsf
|
||||
bool "fsf - Default configuration"
|
||||
endchoice
|
||||
|
||||
config BR2_XTENSA_CUSTOM_NAME
|
||||
string "Custom Xtensa processor configuration name"
|
||||
depends on BR2_XTENSA_CUSTOM
|
||||
default ""
|
||||
help
|
||||
Name given to a custom Xtensa processor configuration.
|
||||
|
||||
config BR2_XTENSA_CORE_NAME
|
||||
string
|
||||
default BR2_XTENSA_CUSTOM_NAME if BR2_XTENSA_CUSTOM
|
||||
default "" if BR2_xtensa_fsf
|
||||
|
||||
config BR2_XTENSA_OVERLAY_DIR
|
||||
string "Overlay directory for custom configuration"
|
||||
depends on BR2_XTENSA_CUSTOM
|
||||
default ""
|
||||
help
|
||||
Provide the directory path that contains the overlay file
|
||||
for a custom processor configuration. The path is relative
|
||||
to the top directory of buildroot.
|
||||
These overlay files are tar packages with updated configuration
|
||||
files for various toolchain packages and Xtensa processor
|
||||
configurations. They are provided by the processor vendor or
|
||||
directly from Tensilica.
|
||||
|
||||
config BR2_ARCH
|
||||
default "xtensa" if BR2_xtensa
|
||||
|
||||
config BR2_ARCH_HAS_ATOMICS
|
||||
default y
|
BIN
bin/senmqd
BIN
bin/senmqd
Binary file not shown.
|
@ -0,0 +1,7 @@
|
|||
#!/bin/sh
|
||||
# post-image.sh for SoCkit
|
||||
# 2014, "Roman Diouskine" <roman.diouskine@savoirfairelinux.com>
|
||||
# 2014, "Sebastien Bourdelin" <sebastien.bourdelin@savoirfairelinux.com>
|
||||
|
||||
# create a DTB file copy with the name expected by the u-boot config
|
||||
cp -af $BINARIES_DIR/socfpga_cyclone5_sockit.dtb $BINARIES_DIR/socfpga.dtb
|
|
@ -0,0 +1,157 @@
|
|||
SoCkit
|
||||
|
||||
Intro
|
||||
=====
|
||||
|
||||
This is the buildroot board support for the Arrow SoCkit Evaluation Board.
|
||||
|
||||
A good source of information is :
|
||||
http://www.rocketboards.org/foswiki/Documentation/ArrowSoCKitEvaluationBoard
|
||||
|
||||
How it works
|
||||
============
|
||||
|
||||
Boot process :
|
||||
--------------
|
||||
|
||||
In summary, the bootloader has multiple stages, an hardcoded boot routine is
|
||||
loaded from an on-chip ROM.
|
||||
|
||||
- That first stage is scanning the SD card's partition table to find
|
||||
partition having the 0xA2 type.
|
||||
- This partition is expected to contain a boot image on its first 60 Kb,
|
||||
because u-boot is bigger, we must fill it with a preloader (u-boot-spl)
|
||||
which will load the u-boot image.
|
||||
- Then the u-boot image will load the Linux kernel.
|
||||
|
||||
A good source of information for the boot process is :
|
||||
http://xillybus.com/tutorials/u-boot-image-altera-soc
|
||||
|
||||
Note for the SPL :
|
||||
The SPL generated by the u-boot from Rocketboards doesn't seems to work,
|
||||
therefore we provide a patch for {uboot-PKG}/board/altera/socfpga_cyclone5/*
|
||||
based on the files generated with the Altera example design.
|
||||
|
||||
For more information about this files please look at :
|
||||
http://www.rocketboards.org/foswiki/Documentation/PreloaderUbootCustomization#Common_Source_Code
|
||||
|
||||
How to build it
|
||||
===============
|
||||
|
||||
Configure Buildroot
|
||||
-------------------
|
||||
|
||||
The altera_sockit_defconfig configuration is a minimal configuration with
|
||||
all that is required to bring the SoCkit :
|
||||
|
||||
$ make altera_sockit_defconfig
|
||||
|
||||
Build everything
|
||||
----------------
|
||||
|
||||
Note: you will need to have access to the network, since Buildroot will
|
||||
download the packages' sources.
|
||||
|
||||
$ make
|
||||
|
||||
Result of the build
|
||||
-------------------
|
||||
|
||||
After building, you should obtain this tree:
|
||||
|
||||
output/images/
|
||||
├── rootfs.ext2
|
||||
├── rootfs.ext3 -> rootfs.ext2
|
||||
├── rootfs.tar
|
||||
├── socfpga_cyclone5_sockit.dtb
|
||||
├── socfpga.dtb
|
||||
├── u-boot.img
|
||||
├── u-boot-spl.bin
|
||||
└── uImage
|
||||
|
||||
|
||||
Signing the Preloader
|
||||
---------------------
|
||||
|
||||
*** BEWARE ****
|
||||
The u-boot-spl.bin must be signed using the Altera's tool "mkpimage".
|
||||
This tool comes as a part of the Altera development environnment (SoC EDS).
|
||||
A fork of this tool have been done by Maxime Hadjinlian and can be found here :
|
||||
https://github.com/maximeh/mkpimage
|
||||
|
||||
Remember that without signing the u-boot-spl.bin, the board will not boot !!!
|
||||
|
||||
$ mkpimage u-boot-spl.bin -o u-boot-spl-signed.bin
|
||||
|
||||
Prepare your SDcard
|
||||
===================
|
||||
|
||||
A good source of information for the partitioning process is :
|
||||
http://www.rocketboards.org/foswiki/view/Projects/SoCKitLinaroLinuxDesktop#Partition_the_SD_Card
|
||||
|
||||
Create the SDcard partition table
|
||||
----------------------------------
|
||||
|
||||
Determine the device associated to the SD card :
|
||||
|
||||
$ cat /proc/partitions
|
||||
|
||||
let's assume it is /dev/mmcblk0 :
|
||||
|
||||
$ sudo fdisk /dev/mmcblk0
|
||||
|
||||
Delete all previous partitions with 'd' then create the new partition table,
|
||||
using these options, pressing enter after each one:
|
||||
|
||||
* n p 1 9000000 +20480K t 1 b
|
||||
* n p 2 4096 +4496384K t 83
|
||||
* n p 3 2048 +1024K t 3 a2
|
||||
|
||||
Using the 'p' option, the SD card's partition must look like this :
|
||||
|
||||
Device Boot Start End Blocks Id System
|
||||
/dev/mmcblk0p1 9000000 9041919 20960 b W95 FAT32
|
||||
/dev/mmcblk0p2 4096 8996863 4496384 83 Linux
|
||||
/dev/mmcblk0p3 2048 4095 1024 a2 Unknown
|
||||
|
||||
Then write the partition table using 'w' and exit.
|
||||
|
||||
Make partition one a DOS partition :
|
||||
|
||||
$ sudo mkdosfs /dev/mmcblk0p1
|
||||
|
||||
Install the binaries to the SDcard
|
||||
----------------------------------
|
||||
|
||||
Remember your binaries are located in output/images/, go inside that directory :
|
||||
|
||||
$ cd output/images
|
||||
|
||||
The partition with type a2 is the partition scan by the first bootloader stage
|
||||
in the SoCkit ROM to find the next bootloader stage so we must write the signed
|
||||
preloader and the u-boot binaries in that partition :
|
||||
|
||||
$ sudo dd if=u-boot-spl-signed.bin of=/dev/mmcblk0p3 bs=64k seek=0
|
||||
$ sudo dd if=u-boot.img of=/dev/mmcblk0p3 bs=64k seek=4
|
||||
|
||||
Copy the Linux kernel and its Device tree :
|
||||
|
||||
$ sudo mkdir /mnt/sdcard
|
||||
$ sudo mount /dev/mmcblk0p1 /mnt/sdcard
|
||||
$ sudo cp socfpga.dtb uImage /mnt/sdcard
|
||||
$ sudo umount /mnt/sdcard
|
||||
|
||||
Copy the rootfs :
|
||||
|
||||
$ sudo dd if=rootfs.ext2 of=/dev/mmcblk0p2 bs=64k
|
||||
$ sudo sync
|
||||
|
||||
It's Done!
|
||||
|
||||
Finish
|
||||
======
|
||||
|
||||
Eject your SDcard, insert it in your SoCkit, and power it up.
|
||||
|
||||
if you want a serial console, you can plug a micro B USB cable on the USB-UART
|
||||
port, the serial port config to used is 57600/8-N-1.
|
|
@ -0,0 +1,820 @@
|
|||
From c70f2ebb350da20af1a0ed4b7960b8e5a1952713 Mon Sep 17 00:00:00 2001
|
||||
From: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
|
||||
Date: Thu, 20 Feb 2014 11:51:31 -0500
|
||||
Subject: [PATCH] board: add to sockit a working preloader design
|
||||
|
||||
---
|
||||
board/altera/socfpga_cyclone5/build.h | 2 +-
|
||||
board/altera/socfpga_cyclone5/iocsr_config.c | 314 ++++++++++-----------
|
||||
board/altera/socfpga_cyclone5/pinmux_config.c | 32 +--
|
||||
board/altera/socfpga_cyclone5/pinmux_config.h | 8 +-
|
||||
board/altera/socfpga_cyclone5/sdram/sdram_config.h | 14 +-
|
||||
.../altera/socfpga_cyclone5/sdram/sequencer_auto.h | 16 +-
|
||||
.../sdram/sequencer_auto_ac_init.c | 16 +-
|
||||
.../socfpga_cyclone5/sdram/sequencer_defines.h | 34 +--
|
||||
8 files changed, 218 insertions(+), 218 deletions(-)
|
||||
|
||||
diff --git a/board/altera/socfpga_cyclone5/build.h b/board/altera/socfpga_cyclone5/build.h
|
||||
index e5d9c3c..a369015 100644
|
||||
--- a/board/altera/socfpga_cyclone5/build.h
|
||||
+++ b/board/altera/socfpga_cyclone5/build.h
|
||||
@@ -29,7 +29,7 @@
|
||||
* Handoff files must provide user option whether to
|
||||
* enable watchdog during preloader execution phase
|
||||
*/
|
||||
-#define CONFIG_PRELOADER_WATCHDOG_ENABLE (0)
|
||||
+#define CONFIG_PRELOADER_WATCHDOG_ENABLE (1)
|
||||
|
||||
/*
|
||||
* Handoff files must provide user option whether to enable
|
||||
diff --git a/board/altera/socfpga_cyclone5/iocsr_config.c b/board/altera/socfpga_cyclone5/iocsr_config.c
|
||||
index fa663e1..90fc154 100644
|
||||
--- a/board/altera/socfpga_cyclone5/iocsr_config.c
|
||||
+++ b/board/altera/socfpga_cyclone5/iocsr_config.c
|
||||
@@ -7,113 +7,113 @@ const unsigned long iocsr_scan_chain0_table[((CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH
|
||||
0xC0000000,
|
||||
0x0000003F,
|
||||
0x00008000,
|
||||
- 0x00020080,
|
||||
- 0x08020000,
|
||||
- 0x08000000,
|
||||
- 0x00018020,
|
||||
+ 0x00060180,
|
||||
+ 0x18060000,
|
||||
+ 0x18000000,
|
||||
+ 0x00018060,
|
||||
0x00000000,
|
||||
0x00004000,
|
||||
- 0x00010040,
|
||||
- 0x04010000,
|
||||
- 0x04000000,
|
||||
- 0x00000010,
|
||||
- 0x00004010,
|
||||
+ 0x000300C0,
|
||||
+ 0x0C030000,
|
||||
+ 0x0C000000,
|
||||
+ 0x00000030,
|
||||
+ 0x0000C030,
|
||||
0x00002000,
|
||||
- 0x00020000,
|
||||
- 0x02008000,
|
||||
- 0x02000000,
|
||||
- 0x00000008,
|
||||
- 0x00002008,
|
||||
+ 0x00018060,
|
||||
+ 0x06018000,
|
||||
+ 0x06000000,
|
||||
+ 0x00000018,
|
||||
+ 0x00006018,
|
||||
0x00001000,
|
||||
};
|
||||
|
||||
const unsigned long iocsr_scan_chain1_table[((CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH / 32) + 1)] = {
|
||||
- 0x000C0300,
|
||||
- 0x10040000,
|
||||
- 0x100000C0,
|
||||
- 0x00000040,
|
||||
- 0x00010040,
|
||||
+ 0x00100000,
|
||||
+ 0x300C0000,
|
||||
+ 0x300000C0,
|
||||
+ 0x000000C0,
|
||||
+ 0x000300C0,
|
||||
0x00008000,
|
||||
0x00080000,
|
||||
- 0x18060000,
|
||||
- 0x18000000,
|
||||
- 0x00000060,
|
||||
- 0x00018060,
|
||||
+ 0x20000000,
|
||||
+ 0x00000000,
|
||||
+ 0x00000080,
|
||||
+ 0x00020000,
|
||||
0x00004000,
|
||||
- 0x00010040,
|
||||
+ 0x000300C0,
|
||||
0x10000000,
|
||||
- 0x04000000,
|
||||
- 0x00000010,
|
||||
- 0x00004010,
|
||||
+ 0x0C000000,
|
||||
+ 0x00000030,
|
||||
+ 0x0000C030,
|
||||
0x00002000,
|
||||
- 0x06008020,
|
||||
- 0x02008000,
|
||||
+ 0x06018060,
|
||||
+ 0x06018000,
|
||||
0x01FE0000,
|
||||
0xF8000000,
|
||||
0x00000007,
|
||||
0x00001000,
|
||||
- 0x00004010,
|
||||
- 0x01004000,
|
||||
- 0x01000000,
|
||||
- 0x00003004,
|
||||
- 0x00001004,
|
||||
+ 0x0000C030,
|
||||
+ 0x0300C000,
|
||||
+ 0x03000000,
|
||||
+ 0x0000300C,
|
||||
+ 0x0000300C,
|
||||
0x00000800,
|
||||
0x00000000,
|
||||
0x00000000,
|
||||
- 0x00800000,
|
||||
- 0x00000002,
|
||||
+ 0x01800000,
|
||||
+ 0x00000006,
|
||||
0x00002000,
|
||||
0x00000400,
|
||||
0x00000000,
|
||||
- 0x00401000,
|
||||
+ 0x00C03000,
|
||||
0x00000003,
|
||||
0x00000000,
|
||||
0x00000000,
|
||||
0x00000200,
|
||||
- 0x00600802,
|
||||
+ 0x00601806,
|
||||
0x00000000,
|
||||
- 0x80200000,
|
||||
- 0x80000600,
|
||||
- 0x00000200,
|
||||
+ 0x80600000,
|
||||
+ 0x80000601,
|
||||
+ 0x00000601,
|
||||
0x00000100,
|
||||
- 0x00300401,
|
||||
- 0xC0100400,
|
||||
- 0x40100000,
|
||||
- 0x40000300,
|
||||
- 0x000C0100,
|
||||
+ 0x00300C03,
|
||||
+ 0xC0300C00,
|
||||
+ 0xC0300000,
|
||||
+ 0xC0000300,
|
||||
+ 0x000C0300,
|
||||
0x00000080,
|
||||
};
|
||||
|
||||
const unsigned long iocsr_scan_chain2_table[((CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH / 32) + 1)] = {
|
||||
- 0x80040100,
|
||||
+ 0x300C0300,
|
||||
0x00000000,
|
||||
0x0FF00000,
|
||||
0x00000000,
|
||||
- 0x0C010040,
|
||||
+ 0x0C0300C0,
|
||||
0x00008000,
|
||||
- 0x18020080,
|
||||
- 0x00000000,
|
||||
- 0x08000000,
|
||||
- 0x00040020,
|
||||
- 0x06018060,
|
||||
+ 0x18060180,
|
||||
+ 0x18060000,
|
||||
+ 0x18000000,
|
||||
+ 0x00018060,
|
||||
+ 0x00018060,
|
||||
0x00004000,
|
||||
- 0x0C010040,
|
||||
- 0x04010000,
|
||||
+ 0x000300C0,
|
||||
+ 0x0C030000,
|
||||
0x00000030,
|
||||
0x00000000,
|
||||
- 0x03004010,
|
||||
+ 0x0300C030,
|
||||
0x00002000,
|
||||
- 0x06008020,
|
||||
- 0x02008000,
|
||||
- 0x02000018,
|
||||
- 0x00006008,
|
||||
- 0x01802008,
|
||||
+ 0x00018060,
|
||||
+ 0x06018000,
|
||||
+ 0x06000000,
|
||||
+ 0x00000018,
|
||||
+ 0x00006018,
|
||||
0x00001000,
|
||||
- 0x03004010,
|
||||
- 0x01004000,
|
||||
- 0x0100000C,
|
||||
- 0x00003004,
|
||||
- 0x00C01004,
|
||||
+ 0x0000C030,
|
||||
+ 0x00000000,
|
||||
+ 0x03000000,
|
||||
+ 0x0000000C,
|
||||
+ 0x00C0300C,
|
||||
0x00000800,
|
||||
};
|
||||
|
||||
@@ -170,14 +170,14 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
|
||||
0xA0000034,
|
||||
0x0D000001,
|
||||
0x6068030C,
|
||||
- 0xC7034018,
|
||||
- 0x0E381A01,
|
||||
+ 0xCF034059,
|
||||
+ 0x1E781A03,
|
||||
0x8030C0D0,
|
||||
- 0x34018606,
|
||||
- 0x01A01C70,
|
||||
+ 0x34059606,
|
||||
+ 0x01A03CF0,
|
||||
0x0C0D0000,
|
||||
- 0x18606803,
|
||||
- 0x01C70340,
|
||||
+ 0x59606803,
|
||||
+ 0x03CF0340,
|
||||
0xD000001A,
|
||||
0x068030C0,
|
||||
0x10040000,
|
||||
@@ -244,15 +244,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
|
||||
0xA0000034,
|
||||
0x0D000001,
|
||||
0x6068030C,
|
||||
- 0xC7034018,
|
||||
- 0x0E381A01,
|
||||
+ 0xCF034059,
|
||||
+ 0x1E781A03,
|
||||
0x8030C0D0,
|
||||
- 0x34018606,
|
||||
+ 0x34059606,
|
||||
0x01A00000,
|
||||
0x0C0D0000,
|
||||
- 0x18606803,
|
||||
- 0x01C70340,
|
||||
- 0xD00E381A,
|
||||
+ 0x59606803,
|
||||
+ 0x03CF0340,
|
||||
+ 0xD01E781A,
|
||||
0x068030C0,
|
||||
0x10040000,
|
||||
0x00200000,
|
||||
@@ -273,7 +273,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
|
||||
0xAA0D4000,
|
||||
0x01C3A810,
|
||||
0xAA0D4000,
|
||||
- 0x01C3A808,
|
||||
+ 0x01C3A810,
|
||||
0xAA0D4000,
|
||||
0x01C3A810,
|
||||
0x00040100,
|
||||
@@ -301,7 +301,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
|
||||
0x2A835000,
|
||||
0x0070EA04,
|
||||
0x2A835000,
|
||||
- 0x0070EA02,
|
||||
+ 0x0070EA04,
|
||||
0x2A835000,
|
||||
0x0070EA04,
|
||||
0x00010040,
|
||||
@@ -321,15 +321,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
|
||||
0x14864000,
|
||||
0x69A47A05,
|
||||
0xCBCF23D7,
|
||||
- 0xF41E791E,
|
||||
- 0x034ED348,
|
||||
+ 0xF5DE791E,
|
||||
+ 0x0356D348,
|
||||
0x821A0000,
|
||||
0x0000D000,
|
||||
0x01860680,
|
||||
0xD769A47A,
|
||||
0x1ECBCF23,
|
||||
- 0x48F41E79,
|
||||
- 0x00034ED3,
|
||||
+ 0x48F5DE79,
|
||||
+ 0x000356D3,
|
||||
0x00080200,
|
||||
0x00001000,
|
||||
0x00080200,
|
||||
@@ -347,7 +347,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
|
||||
0xAA0D4000,
|
||||
0x01C3A810,
|
||||
0xAA0D4000,
|
||||
- 0x01C3A808,
|
||||
+ 0x01C3A810,
|
||||
0xAA0D4000,
|
||||
0x01C3A810,
|
||||
0x00040100,
|
||||
@@ -375,7 +375,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
|
||||
0x2A835000,
|
||||
0x0070EA04,
|
||||
0x2A835000,
|
||||
- 0x0070EA02,
|
||||
+ 0x0070EA04,
|
||||
0x2A835000,
|
||||
0x0070EA04,
|
||||
0x00015000,
|
||||
@@ -395,15 +395,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
|
||||
0x14864000,
|
||||
0x69A47A05,
|
||||
0xCBCF23D7,
|
||||
- 0xF41E791E,
|
||||
- 0x034ED348,
|
||||
- 0x821A00C3,
|
||||
+ 0xF5DE791E,
|
||||
+ 0x0356D348,
|
||||
+ 0x821A02CB,
|
||||
0x0000D000,
|
||||
0x00000680,
|
||||
0xD769A47A,
|
||||
0x1ECBCF23,
|
||||
- 0x48F41E79,
|
||||
- 0x00034ED3,
|
||||
+ 0x48F5DE79,
|
||||
+ 0x000356D3,
|
||||
0x00080200,
|
||||
0x00001000,
|
||||
0x00080200,
|
||||
@@ -421,7 +421,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
|
||||
0xAA0D4000,
|
||||
0x01C3A810,
|
||||
0xAA0D4000,
|
||||
- 0x01C3A808,
|
||||
+ 0x01C3A810,
|
||||
0xAA0D4000,
|
||||
0x01C3A810,
|
||||
0x00040100,
|
||||
@@ -449,7 +449,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
|
||||
0x2A835000,
|
||||
0x0070EA04,
|
||||
0x2A835000,
|
||||
- 0x0070EA02,
|
||||
+ 0x0070EA04,
|
||||
0x2A835000,
|
||||
0x0070EA04,
|
||||
0x00010040,
|
||||
@@ -469,15 +469,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
|
||||
0x14864000,
|
||||
0x69A47A05,
|
||||
0xCBCF23D7,
|
||||
- 0xF41E791E,
|
||||
- 0x034ED348,
|
||||
+ 0xF5DE791E,
|
||||
+ 0x0356D348,
|
||||
0x821A0000,
|
||||
0x0000D000,
|
||||
0x00000680,
|
||||
0xD769A47A,
|
||||
0x1ECBCF23,
|
||||
- 0x48F41E79,
|
||||
- 0x00034ED3,
|
||||
+ 0x48F5DE79,
|
||||
+ 0x000356D3,
|
||||
0x00080200,
|
||||
0x00001000,
|
||||
0x00080200,
|
||||
@@ -495,7 +495,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
|
||||
0xAA0D4000,
|
||||
0x01C3A810,
|
||||
0xAA0D4000,
|
||||
- 0x01C3A808,
|
||||
+ 0x01C3A810,
|
||||
0xAA0D4000,
|
||||
0x01C3A810,
|
||||
0x00040100,
|
||||
@@ -523,7 +523,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
|
||||
0x2A835000,
|
||||
0x0070EA04,
|
||||
0x2A835000,
|
||||
- 0x0070EA02,
|
||||
+ 0x0070EA04,
|
||||
0x2A835000,
|
||||
0x0070EA04,
|
||||
0x00010040,
|
||||
@@ -543,15 +543,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
|
||||
0x14864000,
|
||||
0x69A47A05,
|
||||
0xCBCF23D7,
|
||||
- 0xF41E791E,
|
||||
- 0x034ED348,
|
||||
+ 0xF5DE791E,
|
||||
+ 0x0356D348,
|
||||
0x821A0000,
|
||||
0x0000D000,
|
||||
0x00000680,
|
||||
0xD769A47A,
|
||||
0x1ECBCF23,
|
||||
- 0x48F41E79,
|
||||
- 0x00034ED3,
|
||||
+ 0x48F5DE79,
|
||||
+ 0x000356D3,
|
||||
0x00080200,
|
||||
0x00001000,
|
||||
0x00080200,
|
||||
@@ -567,80 +567,80 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
|
||||
0x04000002,
|
||||
0x00820000,
|
||||
0x00489000,
|
||||
- 0x001A1A1A,
|
||||
- 0x085506A0,
|
||||
- 0x0000E1D4,
|
||||
- 0x045506A0,
|
||||
- 0x0000E1D4,
|
||||
- 0x085506A0,
|
||||
- 0x8000E1D4,
|
||||
+ 0x801A1A1A,
|
||||
+ 0x00000200,
|
||||
+ 0x80000004,
|
||||
+ 0x00000200,
|
||||
+ 0x80000004,
|
||||
+ 0x00000200,
|
||||
+ 0x80000004,
|
||||
0x00000200,
|
||||
0x00000004,
|
||||
- 0x04000000,
|
||||
- 0x00000009,
|
||||
- 0x00002410,
|
||||
+ 0x00040000,
|
||||
+ 0x10000000,
|
||||
+ 0x00000000,
|
||||
0x00000040,
|
||||
- 0x41000000,
|
||||
- 0x00002082,
|
||||
- 0x00000350,
|
||||
- 0x000000DA,
|
||||
+ 0x00010000,
|
||||
+ 0x40002000,
|
||||
+ 0x00000100,
|
||||
+ 0x40000002,
|
||||
+ 0x00000100,
|
||||
+ 0x40000002,
|
||||
0x00000100,
|
||||
0x40000002,
|
||||
0x00000100,
|
||||
0x00000002,
|
||||
- 0x042A8350,
|
||||
- 0x000070EA,
|
||||
- 0x86000000,
|
||||
- 0x08000004,
|
||||
+ 0x00020000,
|
||||
+ 0x08000000,
|
||||
0x00000000,
|
||||
- 0x00482000,
|
||||
- 0x21800000,
|
||||
- 0x00101061,
|
||||
- 0x021541A8,
|
||||
- 0x00003875,
|
||||
- 0x011541A8,
|
||||
- 0x00003875,
|
||||
- 0x021541A8,
|
||||
- 0x20003875,
|
||||
+ 0x00000020,
|
||||
+ 0x00008000,
|
||||
+ 0x20001000,
|
||||
+ 0x00000080,
|
||||
+ 0x20000001,
|
||||
+ 0x00000080,
|
||||
+ 0x20000001,
|
||||
+ 0x00000080,
|
||||
+ 0x20000001,
|
||||
0x00000080,
|
||||
0x00000001,
|
||||
- 0x41000000,
|
||||
- 0x00000002,
|
||||
- 0x00FF0904,
|
||||
+ 0x00010000,
|
||||
+ 0x04000000,
|
||||
+ 0x00FF0000,
|
||||
0x00000000,
|
||||
- 0x90400000,
|
||||
- 0x00000820,
|
||||
+ 0x00004000,
|
||||
+ 0x00000800,
|
||||
0x80000001,
|
||||
- 0x38D612AF,
|
||||
- 0x86F8E38E,
|
||||
- 0x0A0A78B4,
|
||||
- 0x000D020A,
|
||||
+ 0x00041419,
|
||||
+ 0x40000000,
|
||||
+ 0x04000816,
|
||||
+ 0x000D0000,
|
||||
0x00006800,
|
||||
- 0x028A4320,
|
||||
- 0xEBB4D23D,
|
||||
- 0x8F65E791,
|
||||
- 0xA47A0F3C,
|
||||
- 0x0001A769,
|
||||
- 0x00410D00,
|
||||
+ 0x00000340,
|
||||
+ 0xD000001A,
|
||||
+ 0x06800000,
|
||||
+ 0x00340000,
|
||||
+ 0x0001A000,
|
||||
+ 0x00000D00,
|
||||
0x40000068,
|
||||
- 0x3D000003,
|
||||
- 0x91EBB4D2,
|
||||
- 0x3C8F65E7,
|
||||
- 0x69A47A0F,
|
||||
- 0x000001A7,
|
||||
+ 0x1A000003,
|
||||
+ 0x00D00000,
|
||||
+ 0x00068000,
|
||||
+ 0x00003400,
|
||||
+ 0x000001A0,
|
||||
+ 0x00000401,
|
||||
+ 0x00000008,
|
||||
0x00000401,
|
||||
0x00000008,
|
||||
0x00000401,
|
||||
0x00000008,
|
||||
- 0x00000540,
|
||||
- 0x000003A8,
|
||||
- 0x10AA0D40,
|
||||
- 0x8001C3A8,
|
||||
+ 0x00000401,
|
||||
+ 0x80000008,
|
||||
0x0000007F,
|
||||
+ 0x20000000,
|
||||
0x00000000,
|
||||
- 0x00004060,
|
||||
- 0xE1208000,
|
||||
+ 0xE0000080,
|
||||
0x0000001F,
|
||||
- 0x00004100,
|
||||
+ 0x00004000,
|
||||
};
|
||||
|
||||
diff --git a/board/altera/socfpga_cyclone5/pinmux_config.c b/board/altera/socfpga_cyclone5/pinmux_config.c
|
||||
index 730067e..cfd74cd 100644
|
||||
--- a/board/altera/socfpga_cyclone5/pinmux_config.c
|
||||
+++ b/board/altera/socfpga_cyclone5/pinmux_config.c
|
||||
@@ -23,7 +23,7 @@ unsigned long sys_mgr_init_table[CONFIG_HPS_PINMUX_NUM] = {
|
||||
0, /* EMACIO18 */
|
||||
0, /* EMACIO19 */
|
||||
3, /* FLASHIO0 */
|
||||
- 3, /* FLASHIO1 */
|
||||
+ 0, /* FLASHIO1 */
|
||||
3, /* FLASHIO2 */
|
||||
3, /* FLASHIO3 */
|
||||
0, /* FLASHIO4 */
|
||||
@@ -34,25 +34,25 @@ unsigned long sys_mgr_init_table[CONFIG_HPS_PINMUX_NUM] = {
|
||||
3, /* FLASHIO9 */
|
||||
3, /* FLASHIO10 */
|
||||
3, /* FLASHIO11 */
|
||||
- 3, /* GENERALIO0 */
|
||||
- 3, /* GENERALIO1 */
|
||||
- 3, /* GENERALIO2 */
|
||||
- 3, /* GENERALIO3 */
|
||||
- 3, /* GENERALIO4 */
|
||||
- 3, /* GENERALIO5 */
|
||||
- 3, /* GENERALIO6 */
|
||||
- 3, /* GENERALIO7 */
|
||||
- 3, /* GENERALIO8 */
|
||||
+ 0, /* GENERALIO0 */
|
||||
+ 1, /* GENERALIO1 */
|
||||
+ 1, /* GENERALIO2 */
|
||||
+ 1, /* GENERALIO3 */
|
||||
+ 1, /* GENERALIO4 */
|
||||
+ 0, /* GENERALIO5 */
|
||||
+ 0, /* GENERALIO6 */
|
||||
+ 0, /* GENERALIO7 */
|
||||
+ 0, /* GENERALIO8 */
|
||||
3, /* GENERALIO9 */
|
||||
3, /* GENERALIO10 */
|
||||
3, /* GENERALIO11 */
|
||||
3, /* GENERALIO12 */
|
||||
- 2, /* GENERALIO13 */
|
||||
- 2, /* GENERALIO14 */
|
||||
- 3, /* GENERALIO15 */
|
||||
- 3, /* GENERALIO16 */
|
||||
- 2, /* GENERALIO17 */
|
||||
- 2, /* GENERALIO18 */
|
||||
+ 0, /* GENERALIO13 */
|
||||
+ 0, /* GENERALIO14 */
|
||||
+ 1, /* GENERALIO15 */
|
||||
+ 1, /* GENERALIO16 */
|
||||
+ 1, /* GENERALIO17 */
|
||||
+ 1, /* GENERALIO18 */
|
||||
0, /* GENERALIO19 */
|
||||
0, /* GENERALIO20 */
|
||||
0, /* GENERALIO21 */
|
||||
diff --git a/board/altera/socfpga_cyclone5/pinmux_config.h b/board/altera/socfpga_cyclone5/pinmux_config.h
|
||||
index fb483ab..64c750a 100644
|
||||
--- a/board/altera/socfpga_cyclone5/pinmux_config.h
|
||||
+++ b/board/altera/socfpga_cyclone5/pinmux_config.h
|
||||
@@ -11,15 +11,15 @@
|
||||
#define CONFIG_HPS_UART0 (1)
|
||||
#define CONFIG_HPS_UART1 (0)
|
||||
#define CONFIG_HPS_TRACE (0)
|
||||
-#define CONFIG_HPS_I2C0 (1)
|
||||
-#define CONFIG_HPS_I2C1 (0)
|
||||
+#define CONFIG_HPS_I2C0 (0)
|
||||
+#define CONFIG_HPS_I2C1 (1)
|
||||
#define CONFIG_HPS_I2C2 (0)
|
||||
#define CONFIG_HPS_I2C3 (0)
|
||||
#define CONFIG_HPS_SPIM0 (1)
|
||||
-#define CONFIG_HPS_SPIM1 (0)
|
||||
+#define CONFIG_HPS_SPIM1 (1)
|
||||
#define CONFIG_HPS_SPIS0 (0)
|
||||
#define CONFIG_HPS_SPIS1 (0)
|
||||
-#define CONFIG_HPS_CAN0 (1)
|
||||
+#define CONFIG_HPS_CAN0 (0)
|
||||
#define CONFIG_HPS_CAN1 (0)
|
||||
|
||||
#define CONFIG_HPS_SDMMC_BUSWIDTH (4)
|
||||
diff --git a/board/altera/socfpga_cyclone5/sdram/sdram_config.h b/board/altera/socfpga_cyclone5/sdram/sdram_config.h
|
||||
index b90d6f3..dd027ef 100755
|
||||
--- a/board/altera/socfpga_cyclone5/sdram/sdram_config.h
|
||||
+++ b/board/altera/socfpga_cyclone5/sdram/sdram_config.h
|
||||
@@ -4,16 +4,16 @@
|
||||
#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMTYPE (2)
|
||||
#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMBL (8)
|
||||
#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ADDRORDER (0)
|
||||
-#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN (1)
|
||||
-#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN (1)
|
||||
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN (0)
|
||||
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN (0)
|
||||
#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_REORDEREN (1)
|
||||
#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_STARVELIMIT (10)
|
||||
#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_DQSTRKEN (0)
|
||||
#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_NODMPINS (0)
|
||||
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL (6)
|
||||
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL (8)
|
||||
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_AL (0)
|
||||
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL (7)
|
||||
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD (4)
|
||||
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL (11)
|
||||
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD (3)
|
||||
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TFAW (12)
|
||||
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRFC (104)
|
||||
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TREFI (3120)
|
||||
@@ -21,7 +21,7 @@
|
||||
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRP (6)
|
||||
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWR (6)
|
||||
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWTR (4)
|
||||
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP (4)
|
||||
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP (3)
|
||||
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRAS (14)
|
||||
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRC (20)
|
||||
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TMRD (4)
|
||||
@@ -33,7 +33,7 @@
|
||||
#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS (15)
|
||||
#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS (3)
|
||||
#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS (1)
|
||||
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH (40)
|
||||
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH (32)
|
||||
#define CONFIG_HPS_SDR_CTRLCFG_DRAMDEVWIDTH_DEVWIDTH (8)
|
||||
#define CONFIG_HPS_SDR_CTRLCFG_DRAMINTR_INTREN (0)
|
||||
#define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_MEMBL (2)
|
||||
diff --git a/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h b/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h
|
||||
index e8c5484..919676d 100644
|
||||
--- a/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h
|
||||
+++ b/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h
|
||||
@@ -34,7 +34,7 @@
|
||||
#define __RW_MGR_ac_read_en 0x21
|
||||
#define __RW_MGR_ac_mrs3_mirr 0x0C
|
||||
#define __RW_MGR_ac_mrs2 0x05
|
||||
-#define __RW_MGR_CONTENT_ac_mrs1 0x10090044
|
||||
+#define __RW_MGR_CONTENT_ac_mrs1 0x10090006
|
||||
#define __RW_MGR_CONTENT_ac_mrs3 0x100B0000
|
||||
#define __RW_MGR_CONTENT_ac_write_bank_0_col_0_nodata_wl_1 0x18980000
|
||||
#define __RW_MGR_CONTENT_ac_act_1 0x106B0000
|
||||
@@ -46,8 +46,8 @@
|
||||
#define __RW_MGR_CONTENT_ac_init_reset_0_cke_0 0x20700000
|
||||
#define __RW_MGR_CONTENT_ac_read_bank_0_1_norden 0x10580008
|
||||
#define __RW_MGR_CONTENT_ac_pre_all 0x10280400
|
||||
-#define __RW_MGR_CONTENT_ac_mrs0_user 0x10080431
|
||||
-#define __RW_MGR_CONTENT_ac_mrs0_dll_reset 0x10080530
|
||||
+#define __RW_MGR_CONTENT_ac_mrs0_user 0x10080471
|
||||
+#define __RW_MGR_CONTENT_ac_mrs0_dll_reset 0x10080570
|
||||
#define __RW_MGR_CONTENT_ac_read_bank_0_0 0x13580000
|
||||
#define __RW_MGR_CONTENT_ac_write_bank_0_col_1 0x1C980008
|
||||
#define __RW_MGR_CONTENT_ac_read_bank_0_1 0x13580008
|
||||
@@ -55,21 +55,21 @@
|
||||
#define __RW_MGR_CONTENT_ac_write_bank_1_col_1 0x1C9B0008
|
||||
#define __RW_MGR_CONTENT_ac_write_bank_0_col_0 0x1C980000
|
||||
#define __RW_MGR_CONTENT_ac_read_bank_1_0 0x135B0000
|
||||
-#define __RW_MGR_CONTENT_ac_mrs1_mirr 0x100A0024
|
||||
+#define __RW_MGR_CONTENT_ac_mrs1_mirr 0x100A0006
|
||||
#define __RW_MGR_CONTENT_ac_read_bank_1_1 0x135B0008
|
||||
#define __RW_MGR_CONTENT_ac_des_odt_1 0x38780000
|
||||
-#define __RW_MGR_CONTENT_ac_mrs0_dll_reset_mirr 0x100804C8
|
||||
+#define __RW_MGR_CONTENT_ac_mrs0_dll_reset_mirr 0x100804E8
|
||||
#define __RW_MGR_CONTENT_ac_zqcl 0x10380400
|
||||
#define __RW_MGR_CONTENT_ac_write_predata 0x38F80000
|
||||
-#define __RW_MGR_CONTENT_ac_mrs0_user_mirr 0x10080449
|
||||
+#define __RW_MGR_CONTENT_ac_mrs0_user_mirr 0x10080469
|
||||
#define __RW_MGR_CONTENT_ac_ref 0x10480000
|
||||
#define __RW_MGR_CONTENT_ac_nop 0x30780000
|
||||
#define __RW_MGR_CONTENT_ac_rdimm 0x10780000
|
||||
-#define __RW_MGR_CONTENT_ac_mrs2_mirr 0x10090010
|
||||
+#define __RW_MGR_CONTENT_ac_mrs2_mirr 0x10090218
|
||||
#define __RW_MGR_CONTENT_ac_write_bank_0_col_0_nodata 0x18180000
|
||||
#define __RW_MGR_CONTENT_ac_read_en 0x33780000
|
||||
#define __RW_MGR_CONTENT_ac_mrs3_mirr 0x100B0000
|
||||
-#define __RW_MGR_CONTENT_ac_mrs2 0x100A0008
|
||||
+#define __RW_MGR_CONTENT_ac_mrs2 0x100A0218
|
||||
|
||||
#define __RW_MGR_READ_B2B_WAIT2 0x6A
|
||||
#define __RW_MGR_LFSR_WR_RD_BANK_0_WAIT 0x31
|
||||
diff --git a/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c b/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c
|
||||
index e16efa1..20b4ca1 100644
|
||||
--- a/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c
|
||||
+++ b/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c
|
||||
@@ -6,16 +6,16 @@ const alt_u32 ac_rom_init[36] =
|
||||
{
|
||||
0x20700000,
|
||||
0x20780000,
|
||||
- 0x10080431,
|
||||
- 0x10080530,
|
||||
- 0x10090044,
|
||||
- 0x100a0008,
|
||||
+ 0x10080471,
|
||||
+ 0x10080570,
|
||||
+ 0x10090006,
|
||||
+ 0x100a0218,
|
||||
0x100b0000,
|
||||
0x10380400,
|
||||
- 0x10080449,
|
||||
- 0x100804c8,
|
||||
- 0x100a0024,
|
||||
- 0x10090010,
|
||||
+ 0x10080469,
|
||||
+ 0x100804e8,
|
||||
+ 0x100a0006,
|
||||
+ 0x10090218,
|
||||
0x100b0000,
|
||||
0x30780000,
|
||||
0x38780000,
|
||||
diff --git a/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h b/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h
|
||||
index 52faf3f..b85b85c 100644
|
||||
--- a/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h
|
||||
+++ b/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h
|
||||
@@ -1,28 +1,28 @@
|
||||
#ifndef _SEQUENCER_DEFINES_H_
|
||||
#define _SEQUENCER_DEFINES_H_
|
||||
|
||||
-#define AC_ROM_MR1_MIRR 0000000100100
|
||||
+#define AC_ROM_MR1_MIRR 0000000000110
|
||||
#define AC_ROM_MR1_OCD_ENABLE
|
||||
-#define AC_ROM_MR2_MIRR 0000000010000
|
||||
+#define AC_ROM_MR2_MIRR 0001000011000
|
||||
#define AC_ROM_MR3_MIRR 0000000000000
|
||||
#define AC_ROM_MR0_CALIB
|
||||
-#define AC_ROM_MR0_DLL_RESET_MIRR 0010011001000
|
||||
-#define AC_ROM_MR0_DLL_RESET 0010100110000
|
||||
-#define AC_ROM_MR0_MIRR 0010001001001
|
||||
-#define AC_ROM_MR0 0010000110001
|
||||
-#define AC_ROM_MR1 0000001000100
|
||||
-#define AC_ROM_MR2 0000000001000
|
||||
+#define AC_ROM_MR0_DLL_RESET_MIRR 0010011101000
|
||||
+#define AC_ROM_MR0_DLL_RESET 0010101110000
|
||||
+#define AC_ROM_MR0_MIRR 0010001101001
|
||||
+#define AC_ROM_MR0 0010001110001
|
||||
+#define AC_ROM_MR1 0000000000110
|
||||
+#define AC_ROM_MR2 0001000011000
|
||||
#define AC_ROM_MR3 0000000000000
|
||||
#define AFI_CLK_FREQ 401
|
||||
#define AFI_RATE_RATIO 1
|
||||
#define ARRIAVGZ 0
|
||||
#define ARRIAV 0
|
||||
-#define AVL_CLK_FREQ 67
|
||||
+#define AVL_CLK_FREQ 81
|
||||
#define BFM_MODE 0
|
||||
#define BURST2 0
|
||||
#define CALIBRATE_BIT_SLIPS 0
|
||||
-#define CALIB_LFIFO_OFFSET 7
|
||||
-#define CALIB_VFIFO_OFFSET 5
|
||||
+#define CALIB_LFIFO_OFFSET 11
|
||||
+#define CALIB_VFIFO_OFFSET 9
|
||||
#define CYCLONEV 1
|
||||
#define DDR2 0
|
||||
#define DDR3 1
|
||||
@@ -89,20 +89,20 @@
|
||||
#define RW_MGR_MEM_CHIP_SELECT_WIDTH 1
|
||||
#define RW_MGR_MEM_CLK_EN_WIDTH 1
|
||||
#define RW_MGR_MEM_CONTROL_WIDTH 1
|
||||
-#define RW_MGR_MEM_DATA_MASK_WIDTH 5
|
||||
-#define RW_MGR_MEM_DATA_WIDTH 40
|
||||
+#define RW_MGR_MEM_DATA_MASK_WIDTH 4
|
||||
+#define RW_MGR_MEM_DATA_WIDTH 32
|
||||
#define RW_MGR_MEM_DQ_PER_READ_DQS 8
|
||||
#define RW_MGR_MEM_DQ_PER_WRITE_DQS 8
|
||||
-#define RW_MGR_MEM_IF_READ_DQS_WIDTH 5
|
||||
-#define RW_MGR_MEM_IF_WRITE_DQS_WIDTH 5
|
||||
+#define RW_MGR_MEM_IF_READ_DQS_WIDTH 4
|
||||
+#define RW_MGR_MEM_IF_WRITE_DQS_WIDTH 4
|
||||
#define RW_MGR_MEM_NUMBER_OF_CS_PER_DIMM 1
|
||||
#define RW_MGR_MEM_NUMBER_OF_RANKS 1
|
||||
#define RW_MGR_MEM_ODT_WIDTH 1
|
||||
#define RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS 1
|
||||
#define RW_MGR_MEM_VIRTUAL_GROUPS_PER_WRITE_DQS 1
|
||||
#define RW_MGR_MR0_BL 1
|
||||
-#define RW_MGR_MR0_CAS_LATENCY 3
|
||||
-#define RW_MGR_TRUE_MEM_DATA_MASK_WIDTH 5
|
||||
+#define RW_MGR_MR0_CAS_LATENCY 7
|
||||
+#define RW_MGR_TRUE_MEM_DATA_MASK_WIDTH 4
|
||||
#define RW_MGR_WRITE_TO_DEBUG_READ 1.0
|
||||
#define SKEW_CALIBRATION 0
|
||||
#define STATIC_FULL_CALIBRATION 1
|
||||
--
|
||||
1.9.0
|
||||
|
|
@ -0,0 +1,19 @@
|
|||
This is the support for the ARM Foundation v8 machine emulated by the
|
||||
ARM software simulator of the AArch64 architecture.
|
||||
|
||||
First, one has to download the AArch64 software simulator from:
|
||||
|
||||
https://silver.arm.com/download/download.tm?pv=1509509
|
||||
|
||||
Then, use the arm_foundationv8_defconfig configuration to build your
|
||||
Buildroot system.
|
||||
|
||||
Finally, boot your system with:
|
||||
|
||||
${LOCATION_OF_FOUNDATIONV8_SIMULATOR}/Foundation_v8 \
|
||||
--image output/images/linux-system.axf \
|
||||
--block-device output/images/rootfs.ext2 \
|
||||
--network=nat
|
||||
|
||||
You can get network access from within the simulated environment
|
||||
by requesting an IP address using DHCP (run the command 'udhcpc').
|
|
@ -0,0 +1,230 @@
|
|||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_POSIX_MQUEUE=y
|
||||
CONFIG_NO_HZ=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_CGROUPS=y
|
||||
CONFIG_EMBEDDED=y
|
||||
# CONFIG_COMPAT_BRK is not set
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_PROFILING=y
|
||||
CONFIG_OPROFILE=m
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
# CONFIG_ARCH_MULTI_V7 is not set
|
||||
CONFIG_ARCH_MXC=y
|
||||
CONFIG_MXC_IRQ_PRIOR=y
|
||||
CONFIG_MACH_IMX27_DT=y
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_FPE_NWFPE_XP=y
|
||||
CONFIG_PM_DEBUG=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
# CONFIG_INET_LRO is not set
|
||||
# CONFIG_INET_DIAG is not set
|
||||
CONFIG_IPV6=y
|
||||
CONFIG_CAN=m
|
||||
CONFIG_CAN_RAW=m
|
||||
CONFIG_CAN_BCM=m
|
||||
CONFIG_CAN_VCAN=m
|
||||
CONFIG_CAN_MCP251X=m
|
||||
CONFIG_BT=m
|
||||
CONFIG_BT_RFCOMM=m
|
||||
CONFIG_BT_RFCOMM_TTY=y
|
||||
CONFIG_BT_BNEP=m
|
||||
CONFIG_BT_HIDP=m
|
||||
CONFIG_BT_HCIBTUSB=m
|
||||
CONFIG_BT_HCIUART=m
|
||||
CONFIG_BT_HCIUART_H4=y
|
||||
CONFIG_BT_HCIUART_BCSP=y
|
||||
CONFIG_CFG80211=m
|
||||
CONFIG_MAC80211=m
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_CFI_ADV_OPTIONS=y
|
||||
CONFIG_MTD_CFI_GEOMETRY=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
|
||||
# CONFIG_MTD_CFI_I2 is not set
|
||||
CONFIG_MTD_CFI_INTELEXT=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_MXC=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_PROC_DEVICETREE=y
|
||||
CONFIG_EEPROM_AT24=y
|
||||
CONFIG_EEPROM_AT25=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_MII=y
|
||||
# CONFIG_NET_VENDOR_BROADCOM is not set
|
||||
# CONFIG_NET_VENDOR_CIRRUS is not set
|
||||
# CONFIG_NET_VENDOR_FARADAY is not set
|
||||
# CONFIG_NET_VENDOR_INTEL is not set
|
||||
# CONFIG_NET_VENDOR_MARVELL is not set
|
||||
# CONFIG_NET_VENDOR_MICREL is not set
|
||||
# CONFIG_NET_VENDOR_MICROCHIP is not set
|
||||
# CONFIG_NET_VENDOR_NATSEMI is not set
|
||||
# CONFIG_NET_VENDOR_SEEQ is not set
|
||||
# CONFIG_NET_VENDOR_SMSC is not set
|
||||
# CONFIG_NET_VENDOR_STMICRO is not set
|
||||
# CONFIG_NET_VENDOR_WIZNET is not set
|
||||
CONFIG_SMSC_PHY=y
|
||||
CONFIG_RTL8187=m
|
||||
CONFIG_LIBERTAS=m
|
||||
CONFIG_LIBERTAS_SDIO=m
|
||||
CONFIG_RT2X00=m
|
||||
CONFIG_RT2500USB=m
|
||||
CONFIG_RT73USB=m
|
||||
CONFIG_RT2800USB=m
|
||||
CONFIG_RTL8192CU=m
|
||||
CONFIG_ZD1211RW=m
|
||||
CONFIG_INPUT_JOYDEV=y
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
CONFIG_KEYBOARD_GPIO=y
|
||||
CONFIG_KEYBOARD_IMX=m
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
CONFIG_INPUT_JOYSTICK=y
|
||||
CONFIG_INPUT_TOUCHSCREEN=y
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
CONFIG_SERIAL_IMX=y
|
||||
CONFIG_SERIAL_IMX_CONSOLE=y
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_IMX=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_IMX=y
|
||||
CONFIG_SPI_SPIDEV=m
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_W1=y
|
||||
CONFIG_W1_MASTER_MXC=y
|
||||
CONFIG_W1_SLAVE_THERM=y
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_IMX2_WDT=y
|
||||
CONFIG_REGULATOR=y
|
||||
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
||||
CONFIG_MEDIA_SUPPORT=m
|
||||
CONFIG_MEDIA_CAMERA_SUPPORT=y
|
||||
CONFIG_MEDIA_USB_SUPPORT=y
|
||||
CONFIG_USB_VIDEO_CLASS=m
|
||||
CONFIG_USB_PWC=m
|
||||
CONFIG_V4L_PLATFORM_DRIVERS=y
|
||||
CONFIG_SOC_CAMERA=m
|
||||
CONFIG_VIDEO_MX2=m
|
||||
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
|
||||
# CONFIG_DVB_AU8522_V4L is not set
|
||||
# CONFIG_DVB_TUNER_DIB0070 is not set
|
||||
# CONFIG_DVB_TUNER_DIB0090 is not set
|
||||
CONFIG_FB=y
|
||||
# CONFIG_FB_MX3 is not set
|
||||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
# CONFIG_LCD_CLASS_DEVICE is not set
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_FONTS=y
|
||||
CONFIG_FONT_8x8=y
|
||||
CONFIG_LOGO=y
|
||||
# CONFIG_LOGO_LINUX_MONO is not set
|
||||
# CONFIG_LOGO_LINUX_VGA16 is not set
|
||||
CONFIG_SOUND=m
|
||||
CONFIG_SND=m
|
||||
CONFIG_SND_MIXER_OSS=m
|
||||
CONFIG_SND_PCM_OSS=m
|
||||
# CONFIG_SND_DRIVERS is not set
|
||||
# CONFIG_SND_ARM is not set
|
||||
# CONFIG_SND_SPI is not set
|
||||
# CONFIG_SND_USB is not set
|
||||
CONFIG_SND_SOC=m
|
||||
CONFIG_SND_IMX_SOC=m
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_EHCI_MXC=y
|
||||
CONFIG_USB_CHIPIDEA=y
|
||||
CONFIG_USB_CHIPIDEA_HOST=y
|
||||
CONFIG_USB_CHIPIDEA_DEBUG=y
|
||||
CONFIG_USB_ACM=y
|
||||
CONFIG_USB_PRINTER=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_SERIAL=y
|
||||
CONFIG_USB_SERIAL_FTDI_SIO=y
|
||||
CONFIG_USB_SERIAL_PL2303=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_ETH=m
|
||||
CONFIG_USB_GADGETFS=m
|
||||
CONFIG_USB_MASS_STORAGE=m
|
||||
CONFIG_USB_G_HID=m
|
||||
CONFIG_USB_ULPI=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_MXC=y
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
CONFIG_LEDS_TRIGGER_TIMER=y
|
||||
CONFIG_LEDS_TRIGGER_ONESHOT=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
|
||||
CONFIG_LEDS_TRIGGER_CPU=y
|
||||
CONFIG_LEDS_TRIGGER_GPIO=y
|
||||
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
|
||||
CONFIG_LEDS_TRIGGER_TRANSIENT=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_DS1374=y
|
||||
CONFIG_RTC_DRV_MXC=m
|
||||
CONFIG_DMADEVICES=y
|
||||
CONFIG_IMX_SDMA=y
|
||||
CONFIG_IMX_DMA=y
|
||||
# CONFIG_IOMMU_SUPPORT is not set
|
||||
CONFIG_IIO=m
|
||||
CONFIG_PWM=y
|
||||
CONFIG_PWM_IMX=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT3_FS=y
|
||||
CONFIG_EXT3_FS_POSIX_ACL=y
|
||||
CONFIG_EXT3_FS_SECURITY=y
|
||||
# CONFIG_DNOTIFY is not set
|
||||
CONFIG_MSDOS_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
# CONFIG_PROC_PAGE_MONITOR is not set
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_CODEPAGE_850=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_NLS_ISO8859_15=m
|
||||
CONFIG_PRINTK_TIME=y
|
||||
CONFIG_DEBUG_FS=y
|
||||
# CONFIG_SCHED_DEBUG is not set
|
||||
# CONFIG_DEBUG_PREEMPT is not set
|
||||
CONFIG_DEBUG_INFO=y
|
||||
# CONFIG_FTRACE is not set
|
||||
CONFIG_DEBUG_LL=y
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
|
@ -0,0 +1,185 @@
|
|||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_POSIX_MQUEUE=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_EMBEDDED=y
|
||||
# CONFIG_COMPAT_BRK is not set
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_PROFILING=y
|
||||
CONFIG_OPROFILE=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_BSD_DISKLABEL=y
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
# CONFIG_ARCH_MULTI_V7 is not set
|
||||
CONFIG_ARCH_MXS=y
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_AEABI=y
|
||||
# CONFIG_OABI_COMPAT is not set
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CPU_IDLE=y
|
||||
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
CONFIG_IP_PNP=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
# CONFIG_INET_LRO is not set
|
||||
# CONFIG_INET_DIAG is not set
|
||||
CONFIG_IPV6=y
|
||||
CONFIG_CAN=m
|
||||
CONFIG_CAN_VCAN=m
|
||||
CONFIG_CAN_FLEXCAN=m
|
||||
CONFIG_BT=m
|
||||
CONFIG_BT_RFCOMM=m
|
||||
CONFIG_BT_RFCOMM_TTY=y
|
||||
CONFIG_BT_BNEP=m
|
||||
CONFIG_BT_BNEP_MC_FILTER=y
|
||||
CONFIG_BT_BNEP_PROTO_FILTER=y
|
||||
CONFIG_BT_HIDP=m
|
||||
CONFIG_BT_HCIBTUSB=m
|
||||
CONFIG_CFG80211=m
|
||||
CONFIG_MAC80211=m
|
||||
CONFIG_MAC80211_RC_PID=y
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
CONFIG_FW_LOADER=m
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_DATAFLASH=y
|
||||
CONFIG_MTD_M25P80=y
|
||||
# CONFIG_M25PXX_USE_FAST_READ is not set
|
||||
CONFIG_MTD_SST25L=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_GPMI_NAND=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_EEPROM_AT24=y
|
||||
CONFIG_EEPROM_AT25=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_CHR_DEV_ST=y
|
||||
CONFIG_BLK_DEV_SR=y
|
||||
CONFIG_CHR_DEV_SG=y
|
||||
CONFIG_CHR_DEV_SCH=y
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
CONFIG_SCSI_LOGGING=y
|
||||
CONFIG_SCSI_SCAN_ASYNC=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_RTL8187=m
|
||||
CONFIG_RT2X00=m
|
||||
CONFIG_RT73USB=m
|
||||
CONFIG_ZD1211RW=m
|
||||
CONFIG_INPUT_JOYDEV=y
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
CONFIG_INPUT_TOUCHSCREEN=y
|
||||
CONFIG_INPUT_MISC=y
|
||||
CONFIG_INPUT_UINPUT=m
|
||||
# CONFIG_SERIO_SERPORT is not set
|
||||
CONFIG_VT_HW_CONSOLE_BINDING=y
|
||||
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
# CONFIG_DEVKMEM is not set
|
||||
CONFIG_SERIAL_AMBA_PL011=y
|
||||
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
|
||||
CONFIG_SERIAL_MXS_AUART=y
|
||||
CONFIG_TTY_PRINTK=y
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_MXS=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_BITBANG=m
|
||||
CONFIG_SPI_MXS=y
|
||||
CONFIG_SPI_SPIDEV=m
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_HWMON=m
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_STMP3XXX_RTC_WATCHDOG=y
|
||||
CONFIG_REGULATOR=y
|
||||
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
||||
CONFIG_MEDIA_SUPPORT=m
|
||||
CONFIG_MEDIA_CAMERA_SUPPORT=y
|
||||
CONFIG_FB=y
|
||||
CONFIG_FB_MXS=y
|
||||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
CONFIG_LCD_CLASS_DEVICE=y
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
||||
# CONFIG_BACKLIGHT_GENERIC is not set
|
||||
CONFIG_BACKLIGHT_PWM=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_FONTS=y
|
||||
CONFIG_FONT_8x8=y
|
||||
CONFIG_LOGO=y
|
||||
# CONFIG_LOGO_LINUX_MONO is not set
|
||||
# CONFIG_LOGO_LINUX_VGA16 is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEBUG=y
|
||||
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_ACM=y
|
||||
CONFIG_USB_PRINTER=y
|
||||
CONFIG_USB_WDM=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_CHIPIDEA=y
|
||||
CONFIG_USB_CHIPIDEA_UDC=y
|
||||
CONFIG_USB_CHIPIDEA_HOST=y
|
||||
CONFIG_USB_MXS_PHY=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_GADGET_DEBUG_FILES=y
|
||||
CONFIG_USB_ETH=m
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_MXS=y
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
CONFIG_LEDS_TRIGGER_TIMER=y
|
||||
CONFIG_LEDS_TRIGGER_ONESHOT=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
|
||||
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_STMP=y
|
||||
CONFIG_DMADEVICES=y
|
||||
CONFIG_MXS_DMA=y
|
||||
CONFIG_STAGING=y
|
||||
CONFIG_MXS_LRADC=y
|
||||
CONFIG_IIO=y
|
||||
CONFIG_PWM=y
|
||||
CONFIG_PWM_MXS=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT2_FS_XATTR=y
|
||||
CONFIG_EXT2_FS_POSIX_ACL=y
|
||||
CONFIG_EXT2_FS_SECURITY=y
|
||||
CONFIG_EXT2_FS_XIP=y
|
||||
CONFIG_EXT3_FS=y
|
||||
CONFIG_EXT3_FS_POSIX_ACL=y
|
||||
CONFIG_EXT3_FS_SECURITY=y
|
||||
CONFIG_AUTOFS4_FS=y
|
||||
CONFIG_ISO9660_FS=y
|
||||
CONFIG_JOLIET=y
|
||||
CONFIG_ZISOFS=y
|
||||
CONFIG_MSDOS_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_CODEPAGE_850=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_DEBUG_FS=y
|
||||
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
||||
# CONFIG_CRYPTO_HW is not set
|
|
@ -0,0 +1,266 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_NO_HZ=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_EMBEDDED=y
|
||||
# CONFIG_COMPAT_BRK is not set
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_PROFILING=y
|
||||
CONFIG_OPROFILE=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_BSD_DISKLABEL=y
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_MXC=y
|
||||
CONFIG_MXC_IRQ_PRIOR=y
|
||||
CONFIG_MACH_IMX51_DT=y
|
||||
CONFIG_ARM_THUMBEE=y
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CPU_FREQ=y
|
||||
CONFIG_CPU_FREQ_STAT_DETAILS=y
|
||||
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
|
||||
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
||||
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
|
||||
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
|
||||
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
|
||||
CONFIG_CPU_FREQ_IMX=y
|
||||
CONFIG_CPU_IDLE=y
|
||||
CONFIG_VFP=y
|
||||
CONFIG_NEON=y
|
||||
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
|
||||
# CONFIG_SUSPEND is not set
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
CONFIG_IP_PNP=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
# CONFIG_INET_LRO is not set
|
||||
# CONFIG_INET_DIAG is not set
|
||||
CONFIG_IPV6=y
|
||||
CONFIG_CAN=m
|
||||
CONFIG_CAN_RAW=m
|
||||
CONFIG_CAN_BCM=m
|
||||
CONFIG_CAN_VCAN=m
|
||||
CONFIG_CAN_MCP251X=m
|
||||
CONFIG_BT=m
|
||||
CONFIG_BT_L2CAP=y
|
||||
CONFIG_BT_SCO=y
|
||||
CONFIG_BT_RFCOMM=m
|
||||
CONFIG_BT_RFCOMM_TTY=y
|
||||
CONFIG_BT_BNEP=m
|
||||
CONFIG_BT_HIDP=m
|
||||
CONFIG_BT_HCIBTUSB=m
|
||||
CONFIG_BT_HCIUART=m
|
||||
CONFIG_BT_HCIUART_H4=y
|
||||
CONFIG_BT_HCIUART_BCSP=y
|
||||
CONFIG_CFG80211=m
|
||||
CONFIG_MAC80211=m
|
||||
CONFIG_MAC80211_RC_PID=y
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
CONFIG_FW_LOADER=m
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_MXC=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MISC_DEVICES=y
|
||||
CONFIG_EEPROM_AT24=y
|
||||
CONFIG_EEPROM_AT25=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_CHR_DEV_ST=y
|
||||
CONFIG_BLK_DEV_SR=y
|
||||
CONFIG_CHR_DEV_SG=y
|
||||
CONFIG_CHR_DEV_SCH=y
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
CONFIG_SCSI_LOGGING=y
|
||||
CONFIG_SCSI_SCAN_ASYNC=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_SMSC_PHY=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
# CONFIG_NETDEV_1000 is not set
|
||||
# CONFIG_NETDEV_10000 is not set
|
||||
CONFIG_RTL8187=m
|
||||
CONFIG_LIBERTAS=m
|
||||
CONFIG_LIBERTAS_SDIO=m
|
||||
CONFIG_RT2X00=m
|
||||
CONFIG_RT73USB=m
|
||||
CONFIG_ZD1211RW=m
|
||||
CONFIG_INPUT_JOYDEV=y
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
CONFIG_KEYBOARD_GPIO=m
|
||||
CONFIG_KEYBOARD_IMX=m
|
||||
CONFIG_INPUT_TOUCHSCREEN=y
|
||||
CONFIG_TOUCHSCREEN_WM831X=y
|
||||
CONFIG_INPUT_MISC=y
|
||||
CONFIG_INPUT_UINPUT=m
|
||||
CONFIG_INPUT_WM831X_ON=y
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
CONFIG_SERIAL_8250=m
|
||||
CONFIG_SERIAL_IMX=y
|
||||
CONFIG_SERIAL_IMX_CONSOLE=y
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_IMX=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_IMX=y
|
||||
CONFIG_SPI_SPIDEV=m
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_GPIO_WM831X=m
|
||||
CONFIG_POWER_SUPPLY=m
|
||||
CONFIG_WM831X_BACKUP=m
|
||||
CONFIG_WM831X_POWER=m
|
||||
CONFIG_HWMON=m
|
||||
CONFIG_SENSORS_AS1531=m
|
||||
CONFIG_SENSORS_WM831X=m
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
CONFIG_WM831X_WATCHDOG=m
|
||||
CONFIG_IMX2_WDT=y
|
||||
CONFIG_MFD_WM831X_I2C=y
|
||||
CONFIG_REGULATOR=y
|
||||
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
||||
CONFIG_MFD_IMX_IPU_V3=y
|
||||
CONFIG_MEDIA_SUPPORT=m
|
||||
CONFIG_VIDEO_DEV=m
|
||||
# CONFIG_RC_CORE is not set
|
||||
# CONFIG_MEDIA_TUNER_SIMPLE is not set
|
||||
# CONFIG_MEDIA_TUNER_TDA8290 is not set
|
||||
# CONFIG_MEDIA_TUNER_TDA827X is not set
|
||||
# CONFIG_MEDIA_TUNER_TDA18271 is not set
|
||||
# CONFIG_MEDIA_TUNER_TDA9887 is not set
|
||||
# CONFIG_MEDIA_TUNER_TEA5761 is not set
|
||||
# CONFIG_MEDIA_TUNER_TEA5767 is not set
|
||||
# CONFIG_MEDIA_TUNER_MT20XX is not set
|
||||
# CONFIG_MEDIA_TUNER_MT2060 is not set
|
||||
# CONFIG_MEDIA_TUNER_MT2266 is not set
|
||||
# CONFIG_MEDIA_TUNER_MT2131 is not set
|
||||
# CONFIG_MEDIA_TUNER_QT1010 is not set
|
||||
# CONFIG_MEDIA_TUNER_XC2028 is not set
|
||||
# CONFIG_MEDIA_TUNER_XC5000 is not set
|
||||
# CONFIG_MEDIA_TUNER_MXL5005S is not set
|
||||
# CONFIG_MEDIA_TUNER_MXL5007T is not set
|
||||
# CONFIG_MEDIA_TUNER_MC44S803 is not set
|
||||
# CONFIG_MEDIA_TUNER_MAX2165 is not set
|
||||
# CONFIG_MEDIA_TUNER_TDA18218 is not set
|
||||
CONFIG_VIDEO_VIVI=m
|
||||
CONFIG_USB_VIDEO_CLASS=m
|
||||
# CONFIG_RADIO_ADAPTERS is not set
|
||||
CONFIG_FB=y
|
||||
CONFIG_FB_MX5=y
|
||||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_FONTS=y
|
||||
CONFIG_FONT_8x8=y
|
||||
CONFIG_LOGO=y
|
||||
# CONFIG_LOGO_LINUX_MONO is not set
|
||||
# CONFIG_LOGO_LINUX_VGA16 is not set
|
||||
CONFIG_SOUND=m
|
||||
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
|
||||
CONFIG_SND=m
|
||||
CONFIG_SND_MIXER_OSS=m
|
||||
CONFIG_SND_PCM_OSS=m
|
||||
# CONFIG_SND_DRIVERS is not set
|
||||
# CONFIG_SND_ARM is not set
|
||||
# CONFIG_SND_SPI is not set
|
||||
# CONFIG_SND_USB is not set
|
||||
CONFIG_SND_SOC=m
|
||||
CONFIG_SND_IMX_SOC=m
|
||||
CONFIG_SND_SOC_APF51_DEV_WM8960=m
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEBUG=y
|
||||
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
# CONFIG_USB_DEVICE_CLASS is not set
|
||||
CONFIG_USB_SUSPEND=y
|
||||
CONFIG_USB_OTG=y
|
||||
# CONFIG_USB_OTG_WHITELIST is not set
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_EHCI_MXC=y
|
||||
CONFIG_USB_ACM=y
|
||||
CONFIG_USB_PRINTER=y
|
||||
CONFIG_USB_WDM=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_CHIPIDEA=y
|
||||
CONFIG_USB_CHIPIDEA_HOST=y
|
||||
CONFIG_USB_PHY=y
|
||||
CONFIG_NOP_USB_XCEIV=y
|
||||
CONFIG_USB_GPIO_VBUS=y
|
||||
CONFIG_USB_ULPI=y
|
||||
CONFIG_USB_GADGET=m
|
||||
CONFIG_USB_GADGET_DEBUG_FILES=y
|
||||
CONFIG_USB_GADGET_DEBUG_FS=y
|
||||
CONFIG_USB_ETH=m
|
||||
CONFIG_USB_MASS_STORAGE=m
|
||||
CONFIG_USB_G_SERIAL=m
|
||||
CONFIG_USB_CDC_COMPOSITE=m
|
||||
CONFIG_USB_G_MULTI=m
|
||||
CONFIG_USB_G_MULTI_CDC=y
|
||||
CONFIG_USB_G_HID=m
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
CONFIG_MMC_SDHCI_ESDHC_IMX=y
|
||||
CONFIG_MMC_SPI=m
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_WM831X_STATUS=m
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_MXC=y
|
||||
CONFIG_RTC_DRV_WM831X=y
|
||||
CONFIG_STAGING=y
|
||||
CONFIG_IIO=m
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT2_FS_XATTR=y
|
||||
CONFIG_EXT2_FS_POSIX_ACL=y
|
||||
CONFIG_EXT2_FS_SECURITY=y
|
||||
CONFIG_EXT2_FS_XIP=y
|
||||
CONFIG_EXT3_FS=y
|
||||
CONFIG_EXT3_FS_POSIX_ACL=y
|
||||
CONFIG_EXT3_FS_SECURITY=y
|
||||
CONFIG_AUTOFS4_FS=y
|
||||
CONFIG_ISO9660_FS=y
|
||||
CONFIG_JOLIET=y
|
||||
CONFIG_ZISOFS=y
|
||||
CONFIG_MSDOS_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
|
||||
CONFIG_JFFS2_LZO=y
|
||||
CONFIG_JFFS2_CMODE_NONE=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_CODEPAGE_850=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_DEBUG_FS=y
|
||||
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
||||
# CONFIG_CRYPTO_HW is not set
|
|
@ -0,0 +1,98 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
CONFIG_KERNEL_LZO=y
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_ARCH_AT91SAM9260=y
|
||||
CONFIG_ARCH_AT91SAM9260_SAM9XE=y
|
||||
CONFIG_MACH_AT91SAM9260EK=y
|
||||
CONFIG_MACH_CAM60=y
|
||||
CONFIG_MACH_SAM9_L9260=y
|
||||
CONFIG_MACH_AFEB9260=y
|
||||
CONFIG_MACH_USB_A9260=y
|
||||
CONFIG_MACH_QIL_A9260=y
|
||||
CONFIG_MACH_CPU9260=y
|
||||
CONFIG_MACH_FLEXIBITY=y
|
||||
CONFIG_MACH_SNAPPER_9260=y
|
||||
CONFIG_MACH_AT91SAM_DT=y
|
||||
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_ARM_APPENDED_DTB=y
|
||||
CONFIG_ARM_ATAG_DTB_COMPAT=y
|
||||
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
# CONFIG_INET_LRO is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ATMEL=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_MACB=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_GPIO=y
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
CONFIG_AT91SAM9X_WATCHDOG=y
|
||||
# CONFIG_USB_HID is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_STORAGE_DEBUG=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_ZERO=m
|
||||
CONFIG_USB_GADGETFS=m
|
||||
CONFIG_USB_MASS_STORAGE=m
|
||||
CONFIG_USB_G_SERIAL=m
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_AT91SAM9=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_CODEPAGE_850=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_DEBUG_LL=y
|
|
@ -0,0 +1,73 @@
|
|||
Atmel SAMA5D3 Xplained board
|
||||
============================
|
||||
|
||||
This document explains how to set up a basic Buildroot system on the
|
||||
Atmel SAMA5D3 Xplained board, whose main site is
|
||||
http://www.atmel.com/tools/ATSAMA5D3-XPLD.aspx. Additional details can
|
||||
also be found on the http://www.at91.com/linux4sam/bin/view/Linux4SAM/
|
||||
web site.
|
||||
|
||||
Note that the default Buildroot configuration is prepared to boot from
|
||||
an SD card: the first stage bootloader, second stage bootloader,
|
||||
kernel image and root filesystem are all located on the SD card. Some
|
||||
adjustements in the bootloader configuration will be needed to boot
|
||||
from NAND flash.
|
||||
|
||||
Configuring and building Buildroot
|
||||
----------------------------------
|
||||
|
||||
make atmel_xplained_defconfig
|
||||
make
|
||||
|
||||
Preparing the SD card
|
||||
---------------------
|
||||
|
||||
The SD card must be partitionned with at least two partitions: one
|
||||
FAT16 partition for the bootloaders, kernel image and Device Tree
|
||||
blob, and one ext4 partition for the root filesystem. To partition the
|
||||
SD card:
|
||||
|
||||
sudo sfdisk -uM /dev/mmcblk0 <<EOF
|
||||
,64,6
|
||||
;
|
||||
EOF
|
||||
|
||||
This creates a 64 MB partition for the FAT16 filesystem (type 6) and
|
||||
uses the rest for the ext4 filesystem used for the root filesystem.
|
||||
|
||||
Then, format both partitions:
|
||||
|
||||
sudo mkfs.msdos -n boot /dev/mmcblk0p1
|
||||
sudo mkfs.ext4 -L rootfs -O ^huge_file /dev/mmcblk0p2
|
||||
|
||||
Note: the -O ^huge_file option is needed to avoid enabling the huge
|
||||
files features of ext4 (to support files larges than 2 TB), which
|
||||
needs the kernel option CONFIG_LBDAF to be enabled.
|
||||
|
||||
Mount both partitions (if not done automatically by your system):
|
||||
|
||||
sudo mount /dev/mmcblk0p1 /media/boot
|
||||
sudo mount /dev/mmcblk0p2 /media/rootfs
|
||||
|
||||
Copy the bootloaders, kernel image and Device Tree blob to the first
|
||||
partition:
|
||||
|
||||
cp output/images/sama5d3_xplained-sdcardboot-uboot-3.6.2.bin /media/boot/boot.bin
|
||||
cp output/images/u-boot.bin /media/boot/u-boot.bin
|
||||
cp output/images/zImage /media/boot/zImage
|
||||
cp output/images/at91-sama5d3_xplained.dtb /media/boot/at91-sama5d3_xplained.dtb
|
||||
|
||||
Extract the root filesystem to the second partition:
|
||||
|
||||
sudo tar -C /media/rootfs -xf output/images/rootfs.tar
|
||||
|
||||
Unmount both partitions:
|
||||
|
||||
sudo umount /media/boot
|
||||
sudo umount /media/rootfs
|
||||
|
||||
Insert your SD card in your Xplained board, and enjoy. The default
|
||||
U-Boot environment will properly load the kernel and Device Tree blob
|
||||
from the first partition of the SD card, so everything works
|
||||
automatically.
|
||||
|
|
@ -0,0 +1,247 @@
|
|||
/*
|
||||
* Device Tree Generator version: 1.3
|
||||
*
|
||||
* (C) Copyright 2007-2008 Xilinx, Inc.
|
||||
* (C) Copyright 2007-2009 Michal Simek
|
||||
*
|
||||
* Michal SIMEK <monstr@monstr.eu>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*
|
||||
* CAUTION: This file is automatically generated by libgen.
|
||||
* Version: Xilinx EDK 13.2 EDK_O.61xd
|
||||
*
|
||||
* XPS project directory: device-tree_bsp_230-orig
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "xlnx,microblaze";
|
||||
model = "testing";
|
||||
MCB3_LPDDR: memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = < 0x80000000 0x4000000 >;
|
||||
} ;
|
||||
aliases {
|
||||
ethernet0 = &Ethernet_MAC;
|
||||
serial0 = &USB_Uart;
|
||||
} ;
|
||||
chosen {
|
||||
bootargs = "console=ttyUL0";
|
||||
linux,stdout-path = "/axi@0/serial@40600000";
|
||||
} ;
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#cpus = <0x1>;
|
||||
#size-cells = <0>;
|
||||
microblaze_0: cpu@0 {
|
||||
clock-frequency = <66666667>;
|
||||
compatible = "xlnx,microblaze-8.20.a";
|
||||
d-cache-baseaddr = <0x80000000>;
|
||||
d-cache-highaddr = <0x83ffffff>;
|
||||
d-cache-line-size = <0x10>;
|
||||
d-cache-size = <0x2000>;
|
||||
device_type = "cpu";
|
||||
i-cache-baseaddr = <0x80000000>;
|
||||
i-cache-highaddr = <0x83ffffff>;
|
||||
i-cache-line-size = <0x10>;
|
||||
i-cache-size = <0x2000>;
|
||||
model = "microblaze,8.20.a";
|
||||
reg = <0>;
|
||||
timebase-frequency = <66666667>;
|
||||
xlnx,addr-tag-bits = <0xd>;
|
||||
xlnx,allow-dcache-wr = <0x1>;
|
||||
xlnx,allow-icache-wr = <0x1>;
|
||||
xlnx,area-optimized = <0x0>;
|
||||
xlnx,avoid-primitives = <0x0>;
|
||||
xlnx,branch-target-cache-size = <0x0>;
|
||||
xlnx,cache-byte-size = <0x2000>;
|
||||
xlnx,d-axi = <0x1>;
|
||||
xlnx,d-lmb = <0x1>;
|
||||
xlnx,d-plb = <0x0>;
|
||||
xlnx,data-size = <0x20>;
|
||||
xlnx,dcache-addr-tag = <0xd>;
|
||||
xlnx,dcache-always-used = <0x1>;
|
||||
xlnx,dcache-byte-size = <0x2000>;
|
||||
xlnx,dcache-data-width = <0x0>;
|
||||
xlnx,dcache-force-tag-lutram = <0x0>;
|
||||
xlnx,dcache-interface = <0x0>;
|
||||
xlnx,dcache-line-len = <0x4>;
|
||||
xlnx,dcache-use-fsl = <0x0>;
|
||||
xlnx,dcache-use-writeback = <0x0>;
|
||||
xlnx,dcache-victims = <0x0>;
|
||||
xlnx,debug-enabled = <0x1>;
|
||||
xlnx,div-zero-exception = <0x0>;
|
||||
xlnx,dynamic-bus-sizing = <0x1>;
|
||||
xlnx,ecc-use-ce-exception = <0x0>;
|
||||
xlnx,edge-is-positive = <0x1>;
|
||||
xlnx,endianness = <0x1>;
|
||||
xlnx,family = "spartan6";
|
||||
xlnx,fault-tolerant = <0x0>;
|
||||
xlnx,fpu-exception = <0x0>;
|
||||
xlnx,freq = <0x3f940ab>;
|
||||
xlnx,fsl-data-size = <0x20>;
|
||||
xlnx,fsl-exception = <0x0>;
|
||||
xlnx,fsl-links = <0x0>;
|
||||
xlnx,i-axi = <0x0>;
|
||||
xlnx,i-lmb = <0x1>;
|
||||
xlnx,i-plb = <0x0>;
|
||||
xlnx,icache-always-used = <0x1>;
|
||||
xlnx,icache-data-width = <0x0>;
|
||||
xlnx,icache-force-tag-lutram = <0x0>;
|
||||
xlnx,icache-interface = <0x0>;
|
||||
xlnx,icache-line-len = <0x4>;
|
||||
xlnx,icache-streams = <0x0>;
|
||||
xlnx,icache-use-fsl = <0x0>;
|
||||
xlnx,icache-victims = <0x0>;
|
||||
xlnx,ill-opcode-exception = <0x0>;
|
||||
xlnx,instance = "microblaze_0";
|
||||
xlnx,interconnect = <0x2>;
|
||||
xlnx,interconnect-m-axi-dc-aw-register = <0x0>;
|
||||
xlnx,interconnect-m-axi-dc-read-issuing = <0x2>;
|
||||
xlnx,interconnect-m-axi-dc-w-register = <0x0>;
|
||||
xlnx,interconnect-m-axi-dc-write-issuing = <0x20>;
|
||||
xlnx,interconnect-m-axi-dp-read-issuing = <0x1>;
|
||||
xlnx,interconnect-m-axi-dp-write-issuing = <0x1>;
|
||||
xlnx,interconnect-m-axi-ic-read-issuing = <0x2>;
|
||||
xlnx,interconnect-m-axi-ip-read-issuing = <0x1>;
|
||||
xlnx,interrupt-is-edge = <0x0>;
|
||||
xlnx,lockstep-slave = <0x0>;
|
||||
xlnx,mmu-dtlb-size = <0x1>;
|
||||
xlnx,mmu-itlb-size = <0x1>;
|
||||
xlnx,mmu-privileged-instr = <0x0>;
|
||||
xlnx,mmu-tlb-access = <0x3>;
|
||||
xlnx,mmu-zones = <0x2>;
|
||||
xlnx,number-of-pc-brk = <0x1>;
|
||||
xlnx,number-of-rd-addr-brk = <0x0>;
|
||||
xlnx,number-of-wr-addr-brk = <0x0>;
|
||||
xlnx,opcode-0x0-illegal = <0x0>;
|
||||
xlnx,optimization = <0x0>;
|
||||
xlnx,pvr = <0x0>;
|
||||
xlnx,pvr-user1 = <0x0>;
|
||||
xlnx,pvr-user2 = <0x0>;
|
||||
xlnx,reset-msr = <0x0>;
|
||||
xlnx,sco = <0x0>;
|
||||
xlnx,stream-interconnect = <0x0>;
|
||||
xlnx,unaligned-exceptions = <0x0>;
|
||||
xlnx,use-barrel = <0x1>;
|
||||
xlnx,use-branch-target-cache = <0x0>;
|
||||
xlnx,use-dcache = <0x1>;
|
||||
xlnx,use-div = <0x0>;
|
||||
xlnx,use-ext-brk = <0x1>;
|
||||
xlnx,use-ext-nm-brk = <0x1>;
|
||||
xlnx,use-extended-fsl-instr = <0x0>;
|
||||
xlnx,use-fpu = <0x0>;
|
||||
xlnx,use-hw-mul = <0x1>;
|
||||
xlnx,use-icache = <0x1>;
|
||||
xlnx,use-interrupt = <0x1>;
|
||||
xlnx,use-mmu = <0x3>;
|
||||
xlnx,use-msr-instr = <0x1>;
|
||||
xlnx,use-pcmp-instr = <0x0>;
|
||||
xlnx,use-stack-protection = <0x0>;
|
||||
} ;
|
||||
} ;
|
||||
axi4lite_0: axi@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "xlnx,axi-interconnect-1.03.a", "simple-bus";
|
||||
ranges ;
|
||||
Ethernet_MAC: ethernet@40e00000 {
|
||||
compatible = "xlnx,axi-ethernetlite-1.00.a", "xlnx,xps-ethernetlite-1.00.a";
|
||||
device_type = "network";
|
||||
interrupt-parent = <µblaze_0_intc>;
|
||||
interrupts = < 2 0 >;
|
||||
local-mac-address = [ 00 0a 35 aa de 00 ];
|
||||
// phy-handle = <&phy0>;
|
||||
reg = < 0x40e00000 0x10000 >;
|
||||
xlnx,duplex = <0x1>;
|
||||
xlnx,family = "spartan6";
|
||||
xlnx,include-global-buffers = <0x0>;
|
||||
xlnx,include-internal-loopback = <0x0>;
|
||||
xlnx,include-mdio = <0x1>;
|
||||
xlnx,include-phy-constraints = <0x1>;
|
||||
xlnx,interconnect-s-axi-read-acceptance = <0x1>;
|
||||
xlnx,interconnect-s-axi-write-acceptance = <0x1>;
|
||||
xlnx,rx-ping-pong = <0x0>;
|
||||
xlnx,s-axi-aclk-period-ps = <0x3a98>;
|
||||
xlnx,s-axi-id-width = <0x1>;
|
||||
xlnx,s-axi-supports-narrow-burst = <0x0>;
|
||||
xlnx,tx-ping-pong = <0x0>;
|
||||
/*
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
phy0: phy@7 {
|
||||
compatible = "marvell,88e1111";
|
||||
device_type = "ethernet-phy";
|
||||
reg = <7>;
|
||||
} ;
|
||||
} ;
|
||||
*/
|
||||
} ;
|
||||
SPI_FLASH: spi@40a00000 {
|
||||
compatible = "xlnx,axi-spi-1.01.a", "xlnx,xps-spi-2.00.a";
|
||||
interrupt-parent = <µblaze_0_intc>;
|
||||
interrupts = < 1 2 >;
|
||||
reg = < 0x40a00000 0x10000 >;
|
||||
xlnx,family = "spartan6";
|
||||
xlnx,fifo-exist = <0x1>;
|
||||
xlnx,num-ss-bits = <0x1>;
|
||||
xlnx,num-transfer-bits = <0x8>;
|
||||
xlnx,sck-ratio = <0x4>;
|
||||
} ;
|
||||
USB_Uart: serial@40600000 {
|
||||
clock-frequency = <66666667>;
|
||||
compatible = "xlnx,axi-uartlite-1.02.a", "xlnx,xps-uartlite-1.00.a";
|
||||
current-speed = <115200>;
|
||||
device_type = "serial";
|
||||
interrupt-parent = <µblaze_0_intc>;
|
||||
interrupts = < 3 0 >;
|
||||
port-number = <0>;
|
||||
reg = < 0x40600000 0x10000 >;
|
||||
xlnx,baudrate = <0x1c200>;
|
||||
xlnx,data-bits = <0x8>;
|
||||
xlnx,family = "spartan6";
|
||||
xlnx,odd-parity = <0x1>;
|
||||
xlnx,s-axi-aclk-freq-hz = <0x3f940ab>;
|
||||
xlnx,use-parity = <0x0>;
|
||||
} ;
|
||||
microblaze_0_intc: interrupt-controller@41200000 {
|
||||
#interrupt-cells = <0x2>;
|
||||
compatible = "xlnx,axi-intc-1.01.a", "xlnx,xps-intc-1.00.a";
|
||||
interrupt-controller ;
|
||||
reg = < 0x41200000 0x10000 >;
|
||||
xlnx,kind-of-intr = <0xc>;
|
||||
xlnx,num-intr-inputs = <0x4>;
|
||||
} ;
|
||||
system_timer: timer@41c00000 {
|
||||
clock-frequency = <66666667>;
|
||||
compatible = "xlnx,axi-timer-1.02.a", "xlnx,xps-timer-1.00.a";
|
||||
interrupt-parent = <µblaze_0_intc>;
|
||||
interrupts = < 0 2 >;
|
||||
reg = < 0x41c00000 0x10000 >;
|
||||
xlnx,count-width = <0x20>;
|
||||
xlnx,family = "spartan6";
|
||||
xlnx,gen0-assert = <0x1>;
|
||||
xlnx,gen1-assert = <0x1>;
|
||||
xlnx,one-timer-only = <0x0>;
|
||||
xlnx,trig0-assert = <0x1>;
|
||||
xlnx,trig1-assert = <0x1>;
|
||||
} ;
|
||||
} ;
|
||||
} ;
|
|
@ -0,0 +1,68 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
|
||||
CONFIG_INITRAMFS_COMPRESSION_GZIP=y
|
||||
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
||||
CONFIG_EXPERT=y
|
||||
CONFIG_KALLSYMS_ALL=y
|
||||
CONFIG_KALLSYMS_EXTRA_PASS=y
|
||||
# CONFIG_HOTPLUG is not set
|
||||
# CONFIG_BASE_FULL is not set
|
||||
# CONFIG_FUTEX is not set
|
||||
# CONFIG_EPOLL is not set
|
||||
# CONFIG_SIGNALFD is not set
|
||||
# CONFIG_SHMEM is not set
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
# CONFIG_OPT_LIB_ASM is not set
|
||||
CONFIG_KERNEL_BASE_ADDR=0x80000000
|
||||
CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan6"
|
||||
CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
|
||||
# CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR is not set
|
||||
CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
|
||||
CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
|
||||
CONFIG_XILINX_MICROBLAZE0_HW_VER="8.20.a"
|
||||
CONFIG_HZ_100=y
|
||||
CONFIG_MMU=y
|
||||
CONFIG_CMDLINE_BOOL=y
|
||||
CONFIG_CMDLINE_FORCE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
# CONFIG_INET_LRO is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_PROC_DEVICETREE=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_XILINX_EMACLITE=y
|
||||
# CONFIG_INPUT is not set
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_VT is not set
|
||||
CONFIG_SERIAL_UARTLITE=y
|
||||
CONFIG_SERIAL_UARTLITE_CONSOLE=y
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
# CONFIG_HWMON is not set
|
||||
# CONFIG_USB_SUPPORT is not set
|
||||
CONFIG_EXT2_FS=y
|
||||
# CONFIG_DNOTIFY is not set
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_CIFS=y
|
||||
CONFIG_CIFS_STATS=y
|
||||
CONFIG_CIFS_STATS2=y
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_DETECT_HUNG_TASK=y
|
||||
CONFIG_DEBUG_SLAB=y
|
||||
CONFIG_DEBUG_SPINLOCK=y
|
||||
CONFIG_DEBUG_INFO=y
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
|
@ -0,0 +1,70 @@
|
|||
This is the buildroot board support for the Avnet Spartan6 LX9 MicroBoard.
|
||||
|
||||
The Avnet S6LX9 Microboard is a small USB-Stick sized module containing
|
||||
a Spartan6 FPGA capable of running the Microblaze softcore processor
|
||||
together with RAM and FLASH memory.
|
||||
|
||||
The board can be bought from Avnet (avnet.com) or from Trenz Electronic
|
||||
(www.trenz-electronic.de) for a low price.
|
||||
|
||||
To run the Linux built with buildroot you have to install the FPGA bitfile
|
||||
and u-boot as described in the tutorial AvtS6LX9MicroBoard_SW302_PetaLinux
|
||||
available on http://www.em.avnet.com/s6microboard
|
||||
|
||||
On this site also is a forum containing information on how to build your own
|
||||
Microblaze processor for the Microboard.
|
||||
|
||||
The image file (default name is simpleImage.lx9_mmu.ub) has to be copied
|
||||
to your tftp folder (often /tftpboot/) or can be programmed into the
|
||||
board's SPI flash.
|
||||
|
||||
Sample session:
|
||||
|
||||
$ make s6lx9_microboard_defconfig
|
||||
$ make
|
||||
$ cp build/linux-<version>/arch/microblaze/boot/simpleImage.lx9_mmu.ub /tftpboot/br12.2a.ub
|
||||
$ minicom
|
||||
<hit the reset button on the S6LX9 Microboard>
|
||||
|
||||
Icache:ON
|
||||
Dcache:ON
|
||||
U-Boot Start:0x83f00000
|
||||
SF: Got idcode 20 ba 18 10 01
|
||||
*** Warning - bad CRC, using default environment
|
||||
|
||||
Net: Xilinx_Emaclite
|
||||
MAC: 00:0a:35:00:63:37
|
||||
U-BOOT for Avnet-LX9-Microboard-AXI-tiny-13.1
|
||||
|
||||
BOOTP broadcast 1
|
||||
DHCP client bound to address 192.168.11.122
|
||||
Hit any key to stop autoboot: 0
|
||||
U-Boot-PetaLinux> tftp br12.2a.ub
|
||||
Using Xilinx_Emaclite device
|
||||
TFTP from server 192.168.11.10; our IP address is 192.168.11.122
|
||||
Filename 'br12.2a.ub'.
|
||||
Load address: 0x80002000
|
||||
Loading: #################################################################
|
||||
#################################################################
|
||||
#################################################################
|
||||
#################################################################
|
||||
#################################################################
|
||||
##############################
|
||||
done
|
||||
Bytes transferred = 5207724 (4f76ac hex)
|
||||
U-Boot-PetaLinux> bootm
|
||||
## Booting kernel from Legacy Image at 80002000 ...
|
||||
Image Name: Linux-3.1.0
|
||||
Image Type: MicroBlaze Linux Kernel Image (uncompressed)
|
||||
Data Size: 5207660 Bytes = 5 MB
|
||||
Load Address: 80000000
|
||||
Entry Point: 80000000
|
||||
Verifying Checksum ... OK
|
||||
Loading Kernel Image ... OK
|
||||
OK
|
||||
## Transferring control to Linux (at address 80000000), 0x80000000 ramdisk 0x00000000, FDT 0x00000000...
|
||||
Early console on uartlite at 0x40600000
|
||||
..... boot log skipped
|
||||
|
||||
Welcome to Microblaze Buildroot
|
||||
Microblaze login:
|
|
@ -0,0 +1,72 @@
|
|||
This is the buildroot board support for the Avnet Zedboard. The Zedboard is
|
||||
a development board based on the Xilinx Zynq-7000 based All-Programmable
|
||||
System-On-Chip.
|
||||
|
||||
Zedboard information including schematics, reference designs, and manuals are
|
||||
available from http://www.zedboard.org .
|
||||
|
||||
The U-Boot firmware for the Xilinx Zynq All Programmable SoC depends
|
||||
on some propietary code. This dependency consists of a pair of
|
||||
files are available from the Xilinx SDK installation.
|
||||
|
||||
You will need these files from Xilinx SDK installation to generate
|
||||
the U-Boot firmware:
|
||||
ps7_init.c
|
||||
ps7_init.h
|
||||
|
||||
Buildroot will create the following files and place them in the
|
||||
<output>/images directory.
|
||||
zynq-zed.dtb
|
||||
rootfs.cpio.uboot
|
||||
uImage
|
||||
u-boot.img
|
||||
boot.bin
|
||||
|
||||
|
||||
uboot.bin -- U-Boot SPL w/ Xilinx boot.bin wrapper
|
||||
---------------------------------------------------
|
||||
|
||||
Due to licensing issues, the files ps7_init.c/h are not able to be
|
||||
distributed with the U-Boot source code. These files are required to make a
|
||||
boot.bin file.
|
||||
|
||||
If you already have the Xilinx tools installed, the following sequence will
|
||||
unpack, patch and build the rfs, kernel, uboot, and uboot-spl.
|
||||
|
||||
make zedboard_defconfig
|
||||
make uboot-patch
|
||||
cp ${XILINX}/ISE_DS/EDK/sw/lib/hwplatform_templates/zed_hw_platform/ps7_init.{c,h} \
|
||||
output/build/uboot-xilinx-v2014.1/board/xilinx/zynq/
|
||||
|
||||
After copying these files into the U-Boot source tree, you can
|
||||
continue the build with:
|
||||
|
||||
make
|
||||
|
||||
*Notice*
|
||||
While the build will successfully complete without the ps7_init.*
|
||||
files, the uboot.bin file generated by this configuration will not
|
||||
function properly on the Zedboard. Therefore, it is imperative that
|
||||
the ps7_init.* files be copied into the U-Boot source tree any time
|
||||
the clean, or uboot-dirclean targets are made.
|
||||
|
||||
|
||||
Resulting system
|
||||
----------------
|
||||
A FAT32 partition should be created at the beggining of the SD Card
|
||||
and the following files should be installed:
|
||||
/boot.bin
|
||||
/devicetree.dtb
|
||||
/uImage
|
||||
/uramdisk.image.gz
|
||||
/u-boot.img
|
||||
|
||||
|
||||
All needed files can be taken from output/images/
|
||||
|
||||
boot.bin, uImage and u-boot.img are direct copies of the same files
|
||||
available on output/images/
|
||||
|
||||
devicetree.dtb is just zynq-zed.dtb renamed.
|
||||
|
||||
uramdisk.image.gz is rootfs.cpio.uboot renamed
|
|
@ -0,0 +1,251 @@
|
|||
CONFIG_SYSVIPC=y
|
||||
CONFIG_POSIX_MQUEUE=y
|
||||
CONFIG_NO_HZ=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_BSD_PROCESS_ACCT=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=16
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_EXPERT=y
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_PROFILING=y
|
||||
CONFIG_KPROBES=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_FORCE_LOAD=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
CONFIG_MODULE_FORCE_UNLOAD=y
|
||||
CONFIG_MODVERSIONS=y
|
||||
CONFIG_MODULE_SRCVERSION_ALL=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
CONFIG_ARCH_OMAP2PLUS=y
|
||||
CONFIG_OMAP_RESET_CLOCKS=y
|
||||
CONFIG_OMAP_MUX_DEBUG=y
|
||||
CONFIG_ARCH_OMAP3=y
|
||||
CONFIG_ARCH_OMAP4=y
|
||||
CONFIG_SOC_AM43XX=y
|
||||
# CONFIG_ARCH_OMAP2PLUS_TYPICAL is not set
|
||||
# CONFIG_SOC_TI81XX is not set
|
||||
# CONFIG_MACH_OMAP3_BEAGLE is not set
|
||||
# CONFIG_MACH_DEVKIT8000 is not set
|
||||
# CONFIG_MACH_OMAP_LDP is not set
|
||||
# CONFIG_MACH_OMAP3530_LV_SOM is not set
|
||||
# CONFIG_MACH_OMAP3_TORPEDO is not set
|
||||
# CONFIG_MACH_OVERO is not set
|
||||
# CONFIG_MACH_OMAP3EVM is not set
|
||||
# CONFIG_MACH_OMAP3_PANDORA is not set
|
||||
# CONFIG_MACH_TOUCHBOOK is not set
|
||||
# CONFIG_MACH_OMAP_3430SDP is not set
|
||||
# CONFIG_MACH_NOKIA_RM680 is not set
|
||||
# CONFIG_MACH_NOKIA_RX51 is not set
|
||||
# CONFIG_MACH_OMAP_ZOOM2 is not set
|
||||
# CONFIG_MACH_OMAP_ZOOM3 is not set
|
||||
# CONFIG_MACH_CM_T35 is not set
|
||||
# CONFIG_MACH_CM_T3517 is not set
|
||||
# CONFIG_MACH_IGEP0020 is not set
|
||||
# CONFIG_MACH_IGEP0030 is not set
|
||||
# CONFIG_MACH_SBC3530 is not set
|
||||
# CONFIG_MACH_OMAP_3630SDP is not set
|
||||
CONFIG_ARM_THUMBEE=y
|
||||
CONFIG_HAVE_ARM_ARCH_TIMER=y
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_HIGHMEM=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
|
||||
CONFIG_KEXEC=y
|
||||
CONFIG_CPU_FREQ=y
|
||||
CONFIG_CPU_FREQ_STAT_DETAILS=y
|
||||
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
|
||||
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
|
||||
CONFIG_CPU_FREQ_GOV_USERSPACE=y
|
||||
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
|
||||
CONFIG_GENERIC_CPUFREQ_CPU0=y
|
||||
# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_VFP=y
|
||||
CONFIG_NEON=y
|
||||
CONFIG_BINFMT_MISC=y
|
||||
CONFIG_PM_RUNTIME=y
|
||||
CONFIG_PM_DEBUG=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_XFRM_USER=y
|
||||
CONFIG_NET_KEY=y
|
||||
CONFIG_NET_KEY_MIGRATE=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
CONFIG_IP_PNP_RARP=y
|
||||
# CONFIG_INET_LRO is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
# CONFIG_WIRELESS is not set
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
CONFIG_OMAP_OCP2SCP=y
|
||||
CONFIG_CONNECTOR=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=16384
|
||||
CONFIG_CROSSBAR=y
|
||||
CONFIG_EEPROM_93CX6=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
CONFIG_SCSI_SCAN_ASYNC=y
|
||||
CONFIG_MD=y
|
||||
CONFIG_NETDEVICES=y
|
||||
# CONFIG_NET_VENDOR_ARC is not set
|
||||
# CONFIG_NET_CADENCE is not set
|
||||
# CONFIG_NET_VENDOR_BROADCOM is not set
|
||||
# CONFIG_NET_VENDOR_CIRRUS is not set
|
||||
# CONFIG_NET_VENDOR_FARADAY is not set
|
||||
# CONFIG_NET_VENDOR_INTEL is not set
|
||||
# CONFIG_NET_VENDOR_MARVELL is not set
|
||||
# CONFIG_NET_VENDOR_MICREL is not set
|
||||
# CONFIG_NET_VENDOR_NATSEMI is not set
|
||||
# CONFIG_NET_VENDOR_SEEQ is not set
|
||||
# CONFIG_NET_VENDOR_SMSC is not set
|
||||
# CONFIG_NET_VENDOR_STMICRO is not set
|
||||
CONFIG_TI_CPSW=y
|
||||
CONFIG_TI_CPTS=y
|
||||
# CONFIG_NET_VENDOR_VIA is not set
|
||||
# CONFIG_NET_VENDOR_WIZNET is not set
|
||||
CONFIG_AT803X_PHY=y
|
||||
CONFIG_SMSC_PHY=y
|
||||
# CONFIG_WLAN is not set
|
||||
# CONFIG_INPUT_MOUSEDEV is not set
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
CONFIG_SERIO_LIBPS2=y
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_SERIAL_8250_NR_UARTS=32
|
||||
CONFIG_SERIAL_8250_EXTENDED=y
|
||||
CONFIG_SERIAL_8250_MANY_PORTS=y
|
||||
CONFIG_SERIAL_8250_SHARE_IRQ=y
|
||||
CONFIG_SERIAL_8250_DETECT_IRQ=y
|
||||
CONFIG_SERIAL_8250_RSA=y
|
||||
CONFIG_SERIAL_OMAP=y
|
||||
CONFIG_SERIAL_OMAP_CONSOLE=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_OMAP=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_OMAP24XX=y
|
||||
CONFIG_SPI_TI_QSPI=y
|
||||
CONFIG_PINCTRL_SINGLE=y
|
||||
CONFIG_DEBUG_GPIO=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_W1=y
|
||||
CONFIG_POWER_SUPPLY=y
|
||||
CONFIG_THERMAL=y
|
||||
CONFIG_THERMAL_GOV_FAIR_SHARE=y
|
||||
CONFIG_THERMAL_GOV_USER_SPACE=y
|
||||
CONFIG_CPU_THERMAL=y
|
||||
CONFIG_TI_SOC_THERMAL=y
|
||||
CONFIG_TI_THERMAL=y
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_OMAP_WATCHDOG=y
|
||||
CONFIG_MFD_SYSCON=y
|
||||
CONFIG_MFD_TPS65217=y
|
||||
CONFIG_REGULATOR=y
|
||||
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
||||
CONFIG_REGULATOR_PBIAS=y
|
||||
CONFIG_REGULATOR_TPS65023=y
|
||||
CONFIG_REGULATOR_TPS6507X=y
|
||||
CONFIG_REGULATOR_TPS65217=y
|
||||
CONFIG_REGULATOR_TIAVSCLASS0=y
|
||||
CONFIG_FB=y
|
||||
CONFIG_FIRMWARE_EDID=y
|
||||
CONFIG_FB_DA8XX=y
|
||||
CONFIG_FB_DA8XX_TDA998X=y
|
||||
CONFIG_OMAP2_DSS=y
|
||||
CONFIG_OMAP2_DSS_SDI=y
|
||||
CONFIG_OMAP2_DSS_DSI=y
|
||||
CONFIG_FB_OMAP2=y
|
||||
CONFIG_DISPLAY_CONNECTOR_HDMI=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_MUSB_HDRC=m
|
||||
CONFIG_USB_MUSB_OMAP2PLUS=m
|
||||
CONFIG_USB_MUSB_DSPS=m
|
||||
CONFIG_USB_TI_CPPI41_DMA=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_AM335X_PHY_USB=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_GADGET_DEBUG=y
|
||||
CONFIG_USB_GADGET_DEBUG_FS=y
|
||||
CONFIG_USB_ZERO=m
|
||||
CONFIG_USB_ETH=m
|
||||
CONFIG_USB_ETH_EEM=y
|
||||
CONFIG_USB_MASS_STORAGE=m
|
||||
CONFIG_USB_G_MULTI=m
|
||||
CONFIG_USB_G_MULTI_CDC=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_UNSAFE_RESUME=y
|
||||
CONFIG_SDIO_UART=y
|
||||
CONFIG_MMC_OMAP=y
|
||||
CONFIG_MMC_OMAP_HS=y
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
CONFIG_LEDS_TRIGGER_TIMER=y
|
||||
CONFIG_LEDS_TRIGGER_ONESHOT=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
|
||||
CONFIG_LEDS_TRIGGER_CPU=y
|
||||
CONFIG_LEDS_TRIGGER_GPIO=y
|
||||
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_OMAP=y
|
||||
CONFIG_DMADEVICES=y
|
||||
CONFIG_TI_EDMA=y
|
||||
CONFIG_DMA_OMAP=y
|
||||
CONFIG_TI_CPPI41=y
|
||||
CONFIG_COMMON_CLK_DEBUG=y
|
||||
CONFIG_OMAP_USB2=y
|
||||
CONFIG_OMAP_PIPE3=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT3_FS=y
|
||||
# CONFIG_EXT3_FS_XATTR is not set
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_QUOTA=y
|
||||
CONFIG_QFMT_V2=y
|
||||
CONFIG_MSDOS_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_PRINTK_TIME=y
|
||||
CONFIG_DEBUG_INFO=y
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
CONFIG_SCHEDSTATS=y
|
||||
CONFIG_TIMER_STATS=y
|
||||
CONFIG_PROVE_LOCKING=y
|
||||
# CONFIG_DEBUG_BUGVERBOSE is not set
|
||||
CONFIG_CRYPTO_MANAGER=m
|
||||
CONFIG_CRYPTO_SHA256=m
|
||||
CONFIG_CRYPTO_DEFLATE=y
|
||||
CONFIG_CRYPTO_LZO=y
|
||||
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
||||
# CONFIG_CRYPTO_HW is not set
|
||||
CONFIG_CRC_CCITT=y
|
||||
CONFIG_CRC_T10DIF=y
|
||||
CONFIG_CRC_ITU_T=y
|
||||
CONFIG_CRC7=y
|
||||
CONFIG_LIBCRC32C=y
|
||||
CONFIG_AVERAGE=y
|
|
@ -0,0 +1,34 @@
|
|||
From 29885f2f3d700341d322274db6ad085e601c0994 Mon Sep 17 00:00:00 2001
|
||||
From: Pantelis Antoniou <panto@antoniou-consulting.com>
|
||||
Date: Fri, 4 Jan 2013 00:32:33 +0200
|
||||
Subject: [PATCH 3/3] arm: Export cache flush management symbols when
|
||||
!MULTI_CACHE
|
||||
|
||||
When compiling a kernel without CONFIG_MULTI_CACHE enabled the
|
||||
dma access functions end up not being exported. Fix it.
|
||||
|
||||
Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
|
||||
---
|
||||
arch/arm/kernel/setup.c | 9 +++++++++
|
||||
1 file changed, 9 insertions(+)
|
||||
|
||||
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
|
||||
index da1d1aa..dcb678c 100644
|
||||
--- a/arch/arm/kernel/setup.c
|
||||
+++ b/arch/arm/kernel/setup.c
|
||||
@@ -923,3 +923,12 @@ const struct seq_operations cpuinfo_op = {
|
||||
.stop = c_stop,
|
||||
.show = c_show
|
||||
};
|
||||
+
|
||||
+/* export the cache management functions */
|
||||
+#ifndef MULTI_CACHE
|
||||
+
|
||||
+EXPORT_SYMBOL(__glue(_CACHE,_dma_map_area));
|
||||
+EXPORT_SYMBOL(__glue(_CACHE,_dma_unmap_area));
|
||||
+EXPORT_SYMBOL(__glue(_CACHE,_dma_flush_range));
|
||||
+
|
||||
+#endif
|
||||
--
|
||||
1.7.10.4
|
||||
|
|
@ -0,0 +1,6 @@
|
|||
#!/bin/sh
|
||||
# post-image.sh for BeagleBone
|
||||
# 2014, Marcin Jabrzyk <marcin.jabrzyk@gmail.com>
|
||||
|
||||
# copy the uEnv.txt to the output/images directory
|
||||
cp board/beaglebone/uEnv.txt $BINARIES_DIR/uEnv.txt
|
|
@ -0,0 +1,62 @@
|
|||
BeagleBone
|
||||
|
||||
Intro
|
||||
=====
|
||||
To be able to use BeagleBone board with the images generated by
|
||||
Buildroot, you have prepare the SDCard.
|
||||
|
||||
How to build it
|
||||
===============
|
||||
|
||||
$ make beaglebone_defconfig
|
||||
|
||||
Then you can edit the build options using
|
||||
|
||||
$ make menuconfig
|
||||
|
||||
Compile all and build rootfs image:
|
||||
|
||||
$ make
|
||||
|
||||
Result of the build
|
||||
-------------------
|
||||
|
||||
After building, you should get a tree like this:
|
||||
|
||||
output/images/
|
||||
├── am335x-boneblack.dtb
|
||||
├── am335x-bone.dtb
|
||||
├── MLO
|
||||
├── rootfs.ext2
|
||||
├── u-boot.img
|
||||
├── uEnv.txt
|
||||
└── zImage
|
||||
|
||||
|
||||
Prepare you SDCard
|
||||
==================
|
||||
|
||||
You need to prepare first partition in fat32 and marked as bootable,
|
||||
and second where you will write rootfs.
|
||||
|
||||
Copy the files to boot partition
|
||||
|
||||
$ cp MLO u-boot.img zImage uEnv.txt *.dtb /media/zzzzz
|
||||
|
||||
where /media/zzzzz is the mount point
|
||||
Then you need to write the rootfs image onto SDCard:
|
||||
|
||||
# dd if=rootfs.ext2 of=/dev/xxxxx
|
||||
|
||||
where /dev/xxxxx is the second partition. Use:
|
||||
|
||||
# fdisk -l
|
||||
|
||||
to check for correct one.
|
||||
|
||||
Finish
|
||||
======
|
||||
|
||||
Unmount all mounted SDCard partitions and insert the card to BeagleBone.
|
||||
Hold the "BOOT" button and apply power. Then release the "BOOT" button.
|
||||
The output is available on the serial console.
|
|
@ -0,0 +1,3 @@
|
|||
bootpart=0:1
|
||||
bootdir=
|
||||
uenvcmd=run loaduimage;run loadramdisk;run findfdt;run loadfdt;run ramboot
|
Binary file not shown.
Binary file not shown.
|
@ -0,0 +1,18 @@
|
|||
#!/bin/sh
|
||||
# post-build fixups
|
||||
# for further details, see
|
||||
#
|
||||
# http://boundarydevices.com/u-boot-on-i-mx6/
|
||||
#
|
||||
|
||||
BOARD_DIR="$(dirname $0)"
|
||||
|
||||
# bd u-boot looks for bootscript here
|
||||
install -D -m 0644 $BOARD_DIR/6x_bootscript $TARGET_DIR/6x_bootscript
|
||||
|
||||
# u-boot / update script for bd upgradeu command
|
||||
if [ -e $BINARIES_DIR/u-boot.imx ];
|
||||
then
|
||||
install -D -m 0644 $BINARIES_DIR/u-boot.imx $TARGET_DIR/u-boot.imx
|
||||
install -D -m 0644 $BOARD_DIR/6x_upgrade $TARGET_DIR/6x_upgrade
|
||||
fi
|
|
@ -0,0 +1,13 @@
|
|||
Buildroot for Boundary Devices Nitrogen6X:
|
||||
|
||||
http://boundarydevices.com/products/nitrogen6x-board-imx6-arm-cortex-a9-sbc/
|
||||
|
||||
To install, simply extract rootfs.ext2 to first partition of a uSD card:
|
||||
|
||||
sudo dd if=output/images/rootfs.ext2 of=/dev/sdX1
|
||||
|
||||
Where 'sdX1' is the device node of the uSD partition.
|
||||
|
||||
To upgrade u-boot, cancel autoboot and type:
|
||||
|
||||
run upgradeu
|
|
@ -0,0 +1,603 @@
|
|||
From a3e08beea8bf5e96e1237eef4a82f4a2fdd5286b Mon Sep 17 00:00:00 2001
|
||||
From: Gregory Hermant <gregory.hermant@calao-systems.com>
|
||||
Date: Thu, 19 Jul 2012 14:19:59 +0200
|
||||
Subject: [PATCH] Add support for the Calao-systems QIL-A9260
|
||||
|
||||
|
||||
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
|
||||
---
|
||||
board/qil_a9260/nandflash/Makefile | 122 ++++++++++++++
|
||||
board/qil_a9260/nandflash/qil-a9260.h | 109 ++++++++++++
|
||||
board/qil_a9260/qil_a9260.c | 298 +++++++++++++++++++++++++++++++++
|
||||
crt0_gnu.S | 7 +
|
||||
include/part.h | 6 +-
|
||||
5 files changed, 541 insertions(+), 1 deletions(-)
|
||||
create mode 100644 board/qil_a9260/nandflash/Makefile
|
||||
create mode 100644 board/qil_a9260/nandflash/qil-a9260.h
|
||||
create mode 100644 board/qil_a9260/qil_a9260.c
|
||||
|
||||
diff --git a/board/qil_a9260/nandflash/Makefile b/board/qil_a9260/nandflash/Makefile
|
||||
new file mode 100644
|
||||
index 0000000..209a25f
|
||||
--- /dev/null
|
||||
+++ b/board/qil_a9260/nandflash/Makefile
|
||||
@@ -0,0 +1,122 @@
|
||||
+# TODO: set this appropriately for your local toolchain
|
||||
+ifndef ERASE_FCT
|
||||
+ERASE_FCT=rm -f
|
||||
+endif
|
||||
+ifndef CROSS_COMPILE
|
||||
+CROSS_COMPILE=arm-elf-
|
||||
+endif
|
||||
+
|
||||
+TOOLCHAIN=gcc
|
||||
+
|
||||
+BOOTSTRAP_PATH=../../..
|
||||
+
|
||||
+# NandFlashBoot Configuration for QIL-A9260
|
||||
+
|
||||
+# Target name (case sensitive!!!)
|
||||
+TARGET=AT91SAM9260
|
||||
+# Board name (case sensitive!!!)
|
||||
+BOARD=qil_a9260
|
||||
+# Link Address and Top_of_Memory
|
||||
+LINK_ADDR=0x200000
|
||||
+TOP_OF_MEMORY=0x301000
|
||||
+# Name of current directory
|
||||
+PROJECT=nandflash
|
||||
+
|
||||
+ifndef BOOT_NAME
|
||||
+BOOT_NAME=$(PROJECT)_$(BOARD)
|
||||
+endif
|
||||
+
|
||||
+INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
|
||||
+
|
||||
+ifeq ($(TOOLCHAIN), gcc)
|
||||
+
|
||||
+AS=$(CROSS_COMPILE)gcc
|
||||
+CC=$(CROSS_COMPILE)gcc
|
||||
+LD=$(CROSS_COMPILE)gcc
|
||||
+NM= $(CROSS_COMPILE)nm
|
||||
+SIZE=$(CROSS_COMPILE)size
|
||||
+OBJCOPY=$(CROSS_COMPILE)objcopy
|
||||
+OBJDUMP=$(CROSS_COMPILE)objdump
|
||||
+CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
|
||||
+ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
|
||||
+
|
||||
+# Linker flags.
|
||||
+# -Wl,...: tell GCC to pass this to linker.
|
||||
+# -Map: create map file
|
||||
+# --cref: add cross reference to map file
|
||||
+LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
|
||||
+LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
|
||||
+OBJS=crt0_gnu.o
|
||||
+
|
||||
+endif
|
||||
+
|
||||
+OBJS+=\
|
||||
+ $(BOARD).o \
|
||||
+ main.o \
|
||||
+ gpio.o \
|
||||
+ pmc.o \
|
||||
+ debug.o \
|
||||
+ sdramc.o \
|
||||
+ nandflash.o \
|
||||
+ _udivsi3.o \
|
||||
+ _umodsi3.o \
|
||||
+ div0.o \
|
||||
+ udiv.o \
|
||||
+ string.o
|
||||
+
|
||||
+
|
||||
+rebuild: clean all
|
||||
+
|
||||
+all: $(BOOT_NAME)
|
||||
+
|
||||
+ifeq ($(TOOLCHAIN), gcc)
|
||||
+$(BOOT_NAME): $(OBJS)
|
||||
+ $(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
|
||||
+ $(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
|
||||
+endif
|
||||
+
|
||||
+
|
||||
+$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
|
||||
+
|
||||
+main.o: $(BOOTSTRAP_PATH)/main.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
|
||||
+
|
||||
+gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
|
||||
+
|
||||
+pmc.o: $(BOOTSTRAP_PATH)/driver/pmc.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
|
||||
+
|
||||
+debug.o: $(BOOTSTRAP_PATH)/driver/debug.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
|
||||
+
|
||||
+sdramc.o: $(BOOTSTRAP_PATH)/driver/sdramc.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
|
||||
+
|
||||
+dataflash.o: $(BOOTSTRAP_PATH)/driver/dataflash.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
|
||||
+
|
||||
+nandflash.o: $(BOOTSTRAP_PATH)/driver/nandflash.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
|
||||
+
|
||||
+crt0_gnu.o: $(BOOTSTRAP_PATH)/crt0_gnu.S
|
||||
+ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
|
||||
+
|
||||
+div0.o: $(BOOTSTRAP_PATH)/lib/div0.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
|
||||
+
|
||||
+string.o: $(BOOTSTRAP_PATH)/lib/string.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
|
||||
+
|
||||
+udiv.o: $(BOOTSTRAP_PATH)/lib/udiv.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
|
||||
+
|
||||
+_udivsi3.o: $(BOOTSTRAP_PATH)/lib/_udivsi3.S
|
||||
+ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
|
||||
+
|
||||
+_umodsi3.o: $(BOOTSTRAP_PATH)/lib/_umodsi3.S
|
||||
+ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
|
||||
+
|
||||
+clean:
|
||||
+ $(ERASE_FCT) *.o *.bin *.elf *.map
|
||||
diff --git a/board/qil_a9260/nandflash/qil-a9260.h b/board/qil_a9260/nandflash/qil-a9260.h
|
||||
new file mode 100644
|
||||
index 0000000..c87002e
|
||||
--- /dev/null
|
||||
+++ b/board/qil_a9260/nandflash/qil-a9260.h
|
||||
@@ -0,0 +1,109 @@
|
||||
+/* ----------------------------------------------------------------------------
|
||||
+ * ATMEL Microcontroller Software Support - ROUSSET -
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * Copyright (c) 2006, Atmel Corporation
|
||||
+
|
||||
+ * All rights reserved.
|
||||
+ *
|
||||
+ * Redistribution and use in source and binary forms, with or without
|
||||
+ * modification, are permitted provided that the following conditions are met:
|
||||
+ *
|
||||
+ * - Redistributions of source code must retain the above copyright notice,
|
||||
+ * this list of conditions and the disclaimer below.
|
||||
+ *
|
||||
+ * Atmel's name may not be used to endorse or promote products derived from
|
||||
+ * this software without specific prior written permission.
|
||||
+ *
|
||||
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
||||
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||||
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * File Name : qil-a9260.h
|
||||
+ * Object :
|
||||
+ * Creation : GH July 19th 2012
|
||||
+ *-----------------------------------------------------------------------------
|
||||
+ */
|
||||
+#ifndef _QIL_A9260_H
|
||||
+#define _QIL_A9260_H
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* PMC Settings */
|
||||
+/* */
|
||||
+/* The main oscillator is enabled as soon as possible in the c_startup */
|
||||
+/* and MCK is switched on the main oscillator. */
|
||||
+/* PLL initialization is done later in the hw_init() function */
|
||||
+/* ******************************************************************* */
|
||||
+#define MASTER_CLOCK (180000000/2)
|
||||
+#define PLL_LOCK_TIMEOUT 1000000
|
||||
+
|
||||
+#define PLLA_SETTINGS 0x20593F06
|
||||
+#define PLLB_SETTINGS 0x10483F0E
|
||||
+
|
||||
+/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
|
||||
+#define MCKR_SETTINGS (AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
|
||||
+#define MCKR_CSS_SETTINGS (AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* NandFlash Settings */
|
||||
+/* */
|
||||
+/* ******************************************************************* */
|
||||
+#define AT91C_SMARTMEDIA_BASE 0x40000000
|
||||
+
|
||||
+#define AT91_SMART_MEDIA_ALE (1 << 21) /* our ALE is AD21 */
|
||||
+#define AT91_SMART_MEDIA_CLE (1 << 22) /* our CLE is AD22 */
|
||||
+
|
||||
+#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
|
||||
+#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
|
||||
+
|
||||
+#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
|
||||
+
|
||||
+
|
||||
+/* ******************************************************************** */
|
||||
+/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 90000000.*/
|
||||
+/* Please refer to SMC section in AT91SAM datasheet to learn how */
|
||||
+/* to generate these values. */
|
||||
+/* ******************************************************************** */
|
||||
+#define AT91C_SM_NWE_SETUP (1 << 0)
|
||||
+#define AT91C_SM_NCS_WR_SETUP (0 << 8)
|
||||
+#define AT91C_SM_NRD_SETUP (1 << 16)
|
||||
+#define AT91C_SM_NCS_RD_SETUP (0 << 24)
|
||||
+
|
||||
+#define AT91C_SM_NWE_PULSE (3 << 0)
|
||||
+#define AT91C_SM_NCS_WR_PULSE (3 << 8)
|
||||
+#define AT91C_SM_NRD_PULSE (3 << 16)
|
||||
+#define AT91C_SM_NCS_RD_PULSE (3 << 24)
|
||||
+
|
||||
+#define AT91C_SM_NWE_CYCLE (5 << 0)
|
||||
+#define AT91C_SM_NRD_CYCLE (5 << 16)
|
||||
+#define AT91C_SM_TDF (2 << 16)
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* BootStrap Settings */
|
||||
+/* */
|
||||
+/* ******************************************************************* */
|
||||
+#define IMG_ADDRESS 0x20000 /* Image Address in NandFlash */
|
||||
+#define IMG_SIZE 0x40000 /* Image Size in NandFlash */
|
||||
+
|
||||
+#define MACH_TYPE 0x6AF /* QIL-A9260 */
|
||||
+#define JUMP_ADDR 0x23F00000 /* Final Jump Address */
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* Application Settings */
|
||||
+/* ******************************************************************* */
|
||||
+#undef CFG_DEBUG
|
||||
+#undef CFG_DATAFLASH
|
||||
+
|
||||
+#define CFG_NANDFLASH
|
||||
+#undef NANDFLASH_SMALL_BLOCKS /* NANDFLASH_LARGE_BLOCKS used instead */
|
||||
+
|
||||
+#define CFG_HW_INIT
|
||||
+#define CFG_SDRAM
|
||||
+
|
||||
+#endif /* _QIL_A9260_H */
|
||||
diff --git a/board/qil_a9260/qil_a9260.c b/board/qil_a9260/qil_a9260.c
|
||||
new file mode 100644
|
||||
index 0000000..ae122e7
|
||||
--- /dev/null
|
||||
+++ b/board/qil_a9260/qil_a9260.c
|
||||
@@ -0,0 +1,298 @@
|
||||
+/* ----------------------------------------------------------------------------
|
||||
+ * ATMEL Microcontroller Software Support - ROUSSET -
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * Copyright (c) 2006, Atmel Corporation
|
||||
+
|
||||
+ * All rights reserved.
|
||||
+ *
|
||||
+ * Redistribution and use in source and binary forms, with or without
|
||||
+ * modification, are permitted provided that the following conditions are met:
|
||||
+ *
|
||||
+ * - Redistributions of source code must retain the above copyright notice,
|
||||
+ * this list of conditions and the disclaiimer below.
|
||||
+ *
|
||||
+ * Atmel's name may not be used to endorse or promote products derived from
|
||||
+ * this software without specific prior written permission.
|
||||
+ *
|
||||
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
||||
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||||
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * File Name : qil_a9260.c
|
||||
+ * Object :
|
||||
+ * Creation : GH July 19th 2012
|
||||
+ *-----------------------------------------------------------------------------
|
||||
+ */
|
||||
+#include "../../include/part.h"
|
||||
+#include "../../include/gpio.h"
|
||||
+#include "../../include/pmc.h"
|
||||
+#include "../../include/debug.h"
|
||||
+#include "../../include/sdramc.h"
|
||||
+#include "../../include/main.h"
|
||||
+#ifdef CFG_NANDFLASH
|
||||
+#include "../../include/nandflash.h"
|
||||
+#endif
|
||||
+#ifdef CFG_DATAFLASH
|
||||
+#include "../../include/dataflash.h"
|
||||
+#endif
|
||||
+
|
||||
+static inline unsigned int get_cp15(void)
|
||||
+{
|
||||
+ unsigned int value;
|
||||
+ __asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
|
||||
+ return value;
|
||||
+}
|
||||
+
|
||||
+static inline void set_cp15(unsigned int value)
|
||||
+{
|
||||
+ __asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
|
||||
+}
|
||||
+
|
||||
+#ifdef CFG_HW_INIT
|
||||
+/*----------------------------------------------------------------------------*/
|
||||
+/* \fn hw_init */
|
||||
+/* \brief This function performs very low level HW initialization */
|
||||
+/* This function is invoked as soon as possible during the c_startup */
|
||||
+/* The bss segment must be initialized */
|
||||
+/*----------------------------------------------------------------------------*/
|
||||
+void hw_init(void)
|
||||
+{
|
||||
+ unsigned int cp15;
|
||||
+
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc hw_pio[] = {
|
||||
+#ifdef CFG_DEBUG
|
||||
+ {"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+#endif
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Disable watchdog */
|
||||
+ writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
|
||||
+
|
||||
+ /* At this stage the main oscillator is supposed to be enabled
|
||||
+ * PCK = MCK = MOSC */
|
||||
+
|
||||
+ /* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
|
||||
+ pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
|
||||
+
|
||||
+ /* PCK = PLLA = 2 * MCK */
|
||||
+ pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
|
||||
+ /* Switch MCK on PLLA output */
|
||||
+ pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
|
||||
+
|
||||
+ /* Configure PLLB */
|
||||
+ pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
|
||||
+
|
||||
+ /* Configure CP15 */
|
||||
+ cp15 = get_cp15();
|
||||
+ cp15 |= I_CACHE;
|
||||
+ set_cp15(cp15);
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ pio_setup(hw_pio);
|
||||
+
|
||||
+ /* Configure the EBI Slave Slot Cycle to 64 */
|
||||
+ writel( (readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
|
||||
+
|
||||
+#ifdef CFG_DEBUG
|
||||
+ /* Enable Debug messages on the DBGU */
|
||||
+ dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
|
||||
+
|
||||
+ dbg_print("Start AT91Bootstrap...\n\r");
|
||||
+#endif /* CFG_DEBUG */
|
||||
+
|
||||
+#ifdef CFG_SDRAM
|
||||
+ /* Initialize the matrix */
|
||||
+ writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBICSA);
|
||||
+
|
||||
+ /* Configure SDRAM Controller */
|
||||
+ sdram_init( AT91C_SDRAMC_NC_9 |
|
||||
+ AT91C_SDRAMC_NR_13 |
|
||||
+ AT91C_SDRAMC_CAS_2 |
|
||||
+ AT91C_SDRAMC_NB_4_BANKS |
|
||||
+ AT91C_SDRAMC_DBW_32_BITS |
|
||||
+ AT91C_SDRAMC_TWR_2 |
|
||||
+ AT91C_SDRAMC_TRC_7 |
|
||||
+ AT91C_SDRAMC_TRP_2 |
|
||||
+ AT91C_SDRAMC_TRCD_2 |
|
||||
+ AT91C_SDRAMC_TRAS_5 |
|
||||
+ AT91C_SDRAMC_TXSR_8, /* Control Register */
|
||||
+ (MASTER_CLOCK * 7)/1000000, /* Refresh Timer Register */
|
||||
+ AT91C_SDRAMC_MD_SDRAM); /* SDRAM (no low power) */
|
||||
+
|
||||
+
|
||||
+#endif /* CFG_SDRAM */
|
||||
+}
|
||||
+#endif /* CFG_HW_INIT */
|
||||
+
|
||||
+#ifdef CFG_SDRAM
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn sdramc_hw_init */
|
||||
+/* \brief This function performs SDRAMC HW initialization */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void sdramc_hw_init(void)
|
||||
+{
|
||||
+ /* Configure PIOs */
|
||||
+/* const struct pio_desc sdramc_pio[] = {
|
||||
+ {"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+*/
|
||||
+ /* Configure the SDRAMC PIO controller to output PCK0 */
|
||||
+/* pio_setup(sdramc_pio); */
|
||||
+
|
||||
+ writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
|
||||
+ writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
|
||||
+
|
||||
+}
|
||||
+#endif /* CFG_SDRAM */
|
||||
+
|
||||
+#ifdef CFG_DATAFLASH
|
||||
+
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn df_recovery */
|
||||
+/* \brief This function erases DataFlash Page 0 if USR PB is pressed */
|
||||
+/* during boot sequence */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void df_recovery(AT91PS_DF pDf)
|
||||
+{
|
||||
+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc usrpb_pio[] = {
|
||||
+ {"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
|
||||
+ pio_setup(usrpb_pio);
|
||||
+
|
||||
+ /* If USR PB is pressed during Boot sequence */
|
||||
+ /* Erase DataFlash Page 0*/
|
||||
+ if ( !pio_get_value(AT91C_PIN_PB(10)) )
|
||||
+ df_page_erase(pDf, 0);
|
||||
+#endif
|
||||
+}
|
||||
+
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn df_hw_init */
|
||||
+/* \brief This function performs DataFlash HW initialization */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void df_hw_init(void)
|
||||
+{
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc df_pio[] = {
|
||||
+ {"MISO", AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"MOSI", AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"SPCK", AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
|
||||
+ {"NPCS0", AT91C_PIN_PA(3), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+#endif
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ pio_setup(df_pio);
|
||||
+}
|
||||
+#endif /* CFG_DATAFLASH */
|
||||
+
|
||||
+
|
||||
+
|
||||
+#ifdef CFG_NANDFLASH
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn nand_recovery */
|
||||
+/* \brief This function erases NandFlash Block 0 if USR PB is pressed */
|
||||
+/* during boot sequence */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+static void nand_recovery(void)
|
||||
+{
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc usrpb_pio[] = {
|
||||
+ {"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
|
||||
+ pio_setup(usrpb_pio);
|
||||
+
|
||||
+ /* If USR PB is pressed during Boot sequence */
|
||||
+ /* Erase NandFlash block 0*/
|
||||
+ if (!pio_get_value(AT91C_PIN_PB(10)) )
|
||||
+ AT91F_NandEraseBlock0();
|
||||
+}
|
||||
+
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn nandflash_hw_init */
|
||||
+/* \brief NandFlash HW init */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void nandflash_hw_init(void)
|
||||
+{
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc nand_pio[] = {
|
||||
+ {"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
|
||||
+ {"NANDCS", AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
|
||||
+ writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
|
||||
+
|
||||
+ /* Configure SMC CS3 */
|
||||
+ writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
|
||||
+ writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
|
||||
+ writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE) , AT91C_BASE_SMC + SMC_CYCLE3);
|
||||
+ writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE |
|
||||
+ AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF) , AT91C_BASE_SMC + SMC_CTRL3);
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
|
||||
+ pio_setup(nand_pio);
|
||||
+
|
||||
+ nand_recovery();
|
||||
+}
|
||||
+
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn nandflash_cfg_16bits_dbw_init */
|
||||
+/* \brief Configure SMC in 16 bits mode */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void nandflash_cfg_16bits_dbw_init(void)
|
||||
+{
|
||||
+ writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
|
||||
+}
|
||||
+
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn nandflash_cfg_8bits_dbw_init */
|
||||
+/* \brief Configure SMC in 8 bits mode */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void nandflash_cfg_8bits_dbw_init(void)
|
||||
+{
|
||||
+ writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
|
||||
+}
|
||||
+
|
||||
+
|
||||
+#endif /* #ifdef CFG_NANDFLASH */
|
||||
diff --git a/crt0_gnu.S b/crt0_gnu.S
|
||||
index 042b617..002feef 100644
|
||||
--- a/crt0_gnu.S
|
||||
+++ b/crt0_gnu.S
|
||||
@@ -106,6 +106,13 @@ _relocate_to_sram:
|
||||
#endif /* CFG_NORFLASH */
|
||||
|
||||
_setup_clocks:
|
||||
+/* Test if main osc is bypassed */
|
||||
+ ldr r0,=AT91C_PMC_MOR
|
||||
+ ldr r1, [r0]
|
||||
+ ldr r2,=AT91C_CKGR_OSCBYPASS
|
||||
+ ands r1, r1, r2
|
||||
+ bne _init_data /* branch if OSCBYPASS=1 */
|
||||
+
|
||||
/* Test if main oscillator is enabled */
|
||||
ldr r0,=AT91C_PMC_SR
|
||||
ldr r1, [r0]
|
||||
diff --git a/include/part.h b/include/part.h
|
||||
index ba5985a..bbd33fe 100644
|
||||
--- a/include/part.h
|
||||
+++ b/include/part.h
|
||||
@@ -35,7 +35,11 @@
|
||||
|
||||
#ifdef AT91SAM9260
|
||||
#include "AT91SAM9260_inc.h"
|
||||
-#include "at91sam9260ek.h"
|
||||
+ #ifdef at91sam9260ek
|
||||
+ #include "at91sam9260ek.h"
|
||||
+ #elif qil_a9260
|
||||
+ #include "qil-a9260.h"
|
||||
+ #endif
|
||||
#endif
|
||||
|
||||
#ifdef AT91SAM9XE
|
||||
--
|
||||
1.5.6.3
|
||||
|
|
@ -0,0 +1,36 @@
|
|||
From d076aa6182dc6df6bb311e60bbddb03573b9483b Mon Sep 17 00:00:00 2001
|
||||
From: Gregory Hermant <gregory.hermant@calao-systems.com>
|
||||
Date: Fri, 3 Aug 2012 11:25:49 +0200
|
||||
Subject: [PATCH] Enable pull-up on Rx serial ports for the CALAO MB-QIL-A9260
|
||||
|
||||
|
||||
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
|
||||
---
|
||||
arch/arm/boards/qil-a9260/init.c | 6 ++++++
|
||||
1 files changed, 6 insertions(+), 0 deletions(-)
|
||||
|
||||
diff --git a/arch/arm/boards/qil-a9260/init.c b/arch/arm/boards/qil-a9260/init.c
|
||||
index 305d733..b43cace 100644
|
||||
--- a/arch/arm/boards/qil-a9260/init.c
|
||||
+++ b/arch/arm/boards/qil-a9260/init.c
|
||||
@@ -196,11 +196,17 @@ device_initcall(qil_a9260_devices_init);
|
||||
static int qil_a9260_console_init(void)
|
||||
{
|
||||
at91_register_uart(0, 0);
|
||||
+ at91_set_A_periph(AT91_PIN_PB14, 1); /* Enable pull-up on DRXD */
|
||||
+
|
||||
at91_register_uart(1, ATMEL_UART_CTS | ATMEL_UART_RTS
|
||||
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
|
||||
| ATMEL_UART_RI);
|
||||
+
|
||||
at91_register_uart(2, ATMEL_UART_CTS | ATMEL_UART_RTS);
|
||||
+ at91_set_A_periph(AT91_PIN_PB7, 1); /* Enable pull-up on RXD1 */
|
||||
+
|
||||
at91_register_uart(3, ATMEL_UART_CTS | ATMEL_UART_RTS);
|
||||
+ at91_set_A_periph(AT91_PIN_PB9, 1); /* Enable pull-up on RXD2 */
|
||||
|
||||
return 0;
|
||||
}
|
||||
--
|
||||
1.5.6.3
|
||||
|
|
@ -0,0 +1,111 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_ARCH_AT91SAM9260=y
|
||||
CONFIG_MACH_QIL_A9260=y
|
||||
CONFIG_AT91_SLOW_CLOCK=y
|
||||
CONFIG_AT91_EARLY_USART0=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="mem=64M console=ttyS1,115200"
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
CONFIG_IP_ADVANCED_ROUTER=y
|
||||
CONFIG_IP_ROUTE_VERBOSE=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
CONFIG_IP_PNP_RARP=y
|
||||
CONFIG_IP_MROUTE=y
|
||||
CONFIG_IP_PIMSM_V1=y
|
||||
CONFIG_IP_PIMSM_V2=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
# CONFIG_INET_LRO is not set
|
||||
# CONFIG_INET_DIAG is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_DATAFLASH=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ATMEL=y
|
||||
CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_MACB=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
CONFIG_INPUT_EVBUG=y
|
||||
# CONFIG_KEYBOARD_ATKBD is not set
|
||||
CONFIG_KEYBOARD_GPIO=y
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_ATMEL=y
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
# CONFIG_USB_HID is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_ETH=m
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_AT91=m
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_M41T94=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_FUSE_FS=m
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_UBIFS_FS_XATTR=y
|
||||
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_NFS_V3_ACL=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_CODEPAGE_850=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_DEBUG_LL=y
|
|
@ -0,0 +1,27 @@
|
|||
From fe6432a9728b62bce3db73c5a4efe026018fd495 Mon Sep 17 00:00:00 2001
|
||||
From: Gregory Hermant <gregory.hermant@calao-systems.com>
|
||||
Date: Fri, 3 Aug 2012 16:45:37 +0200
|
||||
Subject: [PATCH] QIL-A9260: rtc modalias m41t48 renamed to rtc-m41t48
|
||||
|
||||
|
||||
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
|
||||
---
|
||||
arch/arm/mach-at91/board-qil-a9260.c | 2 +-
|
||||
1 files changed, 1 insertions(+), 1 deletions(-)
|
||||
|
||||
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
|
||||
index bf351e2..c0df05c 100644
|
||||
--- a/arch/arm/mach-at91/board-qil-a9260.c
|
||||
+++ b/arch/arm/mach-at91/board-qil-a9260.c
|
||||
@@ -78,7 +78,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
|
||||
static struct spi_board_info ek_spi_devices[] = {
|
||||
#if defined(CONFIG_RTC_DRV_M41T94)
|
||||
{ /* M41T94 RTC */
|
||||
- .modalias = "m41t94",
|
||||
+ .modalias = "rtc-m41t94",
|
||||
.chip_select = 0,
|
||||
.max_speed_hz = 1 * 1000 * 1000,
|
||||
.bus_num = 0,
|
||||
--
|
||||
1.5.6.3
|
||||
|
|
@ -0,0 +1,45 @@
|
|||
From 3d1a9b44b9dcd2c0f5d54c09596c96c0524d8340 Mon Sep 17 00:00:00 2001
|
||||
From: Gregory Hermant <gregory.hermant@calao-systems.com>
|
||||
Date: Tue, 13 Nov 2012 11:47:41 +0100
|
||||
Subject: [PATCH] trace-debug[stm]: Fix for BT/WLAN instability
|
||||
|
||||
Pins under mop500_ske_pins array are used for different
|
||||
functionalities in snowball. Ex: GPIO161 pin configured
|
||||
for keypad here must stay configured as GPIO alternate
|
||||
function for operating PMU_EN pin of BT/WLAN chip in snowball.
|
||||
So forbid configuring these pins, for snowball
|
||||
|
||||
Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
|
||||
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
|
||||
---
|
||||
arch/arm/mach-ux500/board-mop500-stm.c | 7 +++++--
|
||||
1 file changed, 5 insertions(+), 2 deletions(-)
|
||||
|
||||
diff --git a/arch/arm/mach-ux500/board-mop500-stm.c b/arch/arm/mach-ux500/board-mop500-stm.c
|
||||
index 1bef2a0..532fb9e 100644
|
||||
--- a/arch/arm/mach-ux500/board-mop500-stm.c
|
||||
+++ b/arch/arm/mach-ux500/board-mop500-stm.c
|
||||
@@ -121,7 +121,9 @@ static int stm_ste_disable_ape_on_mipi60(void)
|
||||
if (retval)
|
||||
STM_ERR("Failed to disable MIPI60\n");
|
||||
else {
|
||||
- retval = nmk_config_pins(ARRAY_AND_SIZE(mop500_ske_pins));
|
||||
+ if (!machine_is_snowball())
|
||||
+ retval = nmk_config_pins(
|
||||
+ ARRAY_AND_SIZE(mop500_ske_pins));
|
||||
if (retval)
|
||||
STM_ERR("Failed to enable SKE gpio\n");
|
||||
}
|
||||
@@ -314,7 +316,8 @@ static int stm_ste_connection(enum stm_connection_type con_type)
|
||||
/* Enable altC3 on GPIO70-74 (STMMOD) and GPIO75-76 (UARTMOD) */
|
||||
prcmu_enable_stm_mod_uart();
|
||||
/* Enable APE on MIPI60 */
|
||||
- retval = nmk_config_pins_sleep(ARRAY_AND_SIZE(mop500_ske_pins));
|
||||
+ if (!machine_is_snowball())
|
||||
+ retval = nmk_config_pins_sleep(ARRAY_AND_SIZE(mop500_ske_pins));
|
||||
if (retval)
|
||||
STM_ERR("Failed to disable SKE GPIO\n");
|
||||
else {
|
||||
--
|
||||
1.7.9.5
|
||||
|
|
@ -0,0 +1,551 @@
|
|||
From 53bd82b122f4530a98cba45795832820bb1d0b45 Mon Sep 17 00:00:00 2001
|
||||
From: Gregory Hermant <gregory.hermant@calao-systems.com>
|
||||
Date: Mon, 13 Aug 2012 11:26:10 +0200
|
||||
Subject: [PATCH] Add support for the Calao-systems TNY-A9G20-LPW
|
||||
|
||||
|
||||
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
|
||||
---
|
||||
board/tny_a9g20_lpw/nandflash/Makefile | 121 ++++++++++++
|
||||
board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h | 114 ++++++++++++
|
||||
board/tny_a9g20_lpw/tny_a9g20_lpw.c | 243 +++++++++++++++++++++++++
|
||||
crt0_gnu.S | 6 +
|
||||
include/part.h | 6 +-
|
||||
5 files changed, 489 insertions(+), 1 deletion(-)
|
||||
create mode 100644 board/tny_a9g20_lpw/nandflash/Makefile
|
||||
create mode 100644 board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h
|
||||
create mode 100644 board/tny_a9g20_lpw/tny_a9g20_lpw.c
|
||||
|
||||
diff --git a/board/tny_a9g20_lpw/nandflash/Makefile b/board/tny_a9g20_lpw/nandflash/Makefile
|
||||
new file mode 100644
|
||||
index 0000000..7efbea7
|
||||
--- /dev/null
|
||||
+++ b/board/tny_a9g20_lpw/nandflash/Makefile
|
||||
@@ -0,0 +1,121 @@
|
||||
+# TODO: set this appropriately for your local toolchain
|
||||
+ifndef ERASE_FCT
|
||||
+ERASE_FCT=rm -f
|
||||
+endif
|
||||
+ifndef CROSS_COMPILE
|
||||
+CROSS_COMPILE=arm-elf-
|
||||
+endif
|
||||
+
|
||||
+TOOLCHAIN=gcc
|
||||
+
|
||||
+BOOTSTRAP_PATH=../../..
|
||||
+
|
||||
+# NandFlashBoot Configuration for AT91SAM9260EK
|
||||
+
|
||||
+# Target name (case sensitive!!!)
|
||||
+TARGET=AT91SAM9G20
|
||||
+# Board name (case sensitive!!!)
|
||||
+BOARD=tny_a9g20_lpw
|
||||
+# Link Address and Top_of_Memory
|
||||
+LINK_ADDR=0x200000
|
||||
+TOP_OF_MEMORY=0x301000
|
||||
+# Name of current directory
|
||||
+PROJECT=nandflash
|
||||
+
|
||||
+ifndef BOOT_NAME
|
||||
+BOOT_NAME=$(PROJECT)_$(BOARD)
|
||||
+endif
|
||||
+
|
||||
+INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
|
||||
+
|
||||
+ifeq ($(TOOLCHAIN), gcc)
|
||||
+
|
||||
+AS=$(CROSS_COMPILE)gcc
|
||||
+CC=$(CROSS_COMPILE)gcc
|
||||
+LD=$(CROSS_COMPILE)gcc
|
||||
+NM= $(CROSS_COMPILE)nm
|
||||
+SIZE=$(CROSS_COMPILE)size
|
||||
+OBJCOPY=$(CROSS_COMPILE)objcopy
|
||||
+OBJDUMP=$(CROSS_COMPILE)objdump
|
||||
+CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
|
||||
+ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
|
||||
+
|
||||
+# Linker flags.
|
||||
+# -Wl,...: tell GCC to pass this to linker.
|
||||
+# -Map: create map file
|
||||
+# --cref: add cross reference to map file
|
||||
+LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
|
||||
+LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
|
||||
+OBJS=crt0_gnu.o
|
||||
+
|
||||
+endif
|
||||
+
|
||||
+OBJS+=\
|
||||
+ $(BOARD).o \
|
||||
+ main.o \
|
||||
+ gpio.o \
|
||||
+ pmc.o \
|
||||
+ debug.o \
|
||||
+ sdramc.o \
|
||||
+ nandflash.o \
|
||||
+ _udivsi3.o \
|
||||
+ _umodsi3.o \
|
||||
+ div0.o \
|
||||
+ udiv.o \
|
||||
+ string.o
|
||||
+
|
||||
+rebuild: clean all
|
||||
+
|
||||
+all: $(BOOT_NAME)
|
||||
+
|
||||
+ifeq ($(TOOLCHAIN), gcc)
|
||||
+$(BOOT_NAME): $(OBJS)
|
||||
+ $(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
|
||||
+ $(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
|
||||
+endif
|
||||
+
|
||||
+
|
||||
+$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
|
||||
+
|
||||
+main.o: $(BOOTSTRAP_PATH)/main.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
|
||||
+
|
||||
+gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
|
||||
+
|
||||
+pmc.o: $(BOOTSTRAP_PATH)/driver/pmc.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
|
||||
+
|
||||
+debug.o: $(BOOTSTRAP_PATH)/driver/debug.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
|
||||
+
|
||||
+sdramc.o: $(BOOTSTRAP_PATH)/driver/sdramc.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
|
||||
+
|
||||
+dataflash.o: $(BOOTSTRAP_PATH)/driver/dataflash.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
|
||||
+
|
||||
+nandflash.o: $(BOOTSTRAP_PATH)/driver/nandflash.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
|
||||
+
|
||||
+crt0_gnu.o: $(BOOTSTRAP_PATH)/crt0_gnu.S
|
||||
+ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
|
||||
+
|
||||
+div0.o: $(BOOTSTRAP_PATH)/lib/div0.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
|
||||
+
|
||||
+string.o: $(BOOTSTRAP_PATH)/lib/string.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
|
||||
+
|
||||
+udiv.o: $(BOOTSTRAP_PATH)/lib/udiv.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
|
||||
+
|
||||
+_udivsi3.o: $(BOOTSTRAP_PATH)/lib/_udivsi3.S
|
||||
+ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
|
||||
+
|
||||
+_umodsi3.o: $(BOOTSTRAP_PATH)/lib/_umodsi3.S
|
||||
+ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
|
||||
+
|
||||
+clean:
|
||||
+ $(ERASE_FCT) *.o *.bin *.elf *.map
|
||||
diff --git a/board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h b/board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h
|
||||
new file mode 100644
|
||||
index 0000000..b1f8a1d
|
||||
--- /dev/null
|
||||
+++ b/board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h
|
||||
@@ -0,0 +1,114 @@
|
||||
+/* ----------------------------------------------------------------------------
|
||||
+ * ATMEL Microcontroller Software Support - ROUSSET -
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * Copyright (c) 2008, Atmel Corporation
|
||||
+
|
||||
+ * All rights reserved.
|
||||
+ *
|
||||
+ * Redistribution and use in source and binary forms, with or without
|
||||
+ * modification, are permitted provided that the following conditions are met:
|
||||
+ *
|
||||
+ * - Redistributions of source code must retain the above copyright notice,
|
||||
+ * this list of conditions and the disclaimer below.
|
||||
+ *
|
||||
+ * Atmel's name may not be used to endorse or promote products derived from
|
||||
+ * this software without specific prior written permission.
|
||||
+ *
|
||||
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
||||
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||||
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * File Name : tny-a9g20-lpw.h
|
||||
+ * Object :
|
||||
+ * Creation : GH August 13th 2012
|
||||
+ *-----------------------------------------------------------------------------
|
||||
+ */
|
||||
+#ifndef _TNY_A9G20_LPW_H
|
||||
+#define _TNY_A9G20_LPW_H
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* PMC Settings */
|
||||
+/* */
|
||||
+/* The main oscillator is enabled as soon as possible in the c_startup */
|
||||
+/* and MCK is switched on the main oscillator. */
|
||||
+/* PLL initialization is done later in the hw_init() function */
|
||||
+/* ******************************************************************* */
|
||||
+#define MASTER_CLOCK (100000000)
|
||||
+#define PLL_LOCK_TIMEOUT 1000000
|
||||
+
|
||||
+/* set PLLA to 800Mhz from MAINCK= 12Mhz MULA=199 (0xC7+1= 200), DIVA=0x03 (Fplla=12Mhz x [(199+1)/3]=800Mhz) */
|
||||
+#define PLLA_SETTINGS 0x20C73F03
|
||||
+#define PLLB_SETTINGS 0x100F3F02
|
||||
+
|
||||
+/* Switch MCK on PLLA output PCK = PLLA/2 = 3 * MCK */
|
||||
+/* LP-SDRAM (fmax=100Mhz) PDIV=0 => PRESCALER CLK=PCLK; */
|
||||
+/* MDIV = 2 => PRESCALER CLK / 4 = MCLK=100Mhz */
|
||||
+/* PRESCALER CLK = PLLA (800Mhz) / 2 (PRES=1) = 400Mhz */
|
||||
+#define MCKR_SETTINGS 0x0204
|
||||
+#define MCKR_CSS_SETTINGS (AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* NandFlash Settings */
|
||||
+/* */
|
||||
+/* ******************************************************************* */
|
||||
+#define AT91C_SMARTMEDIA_BASE 0x40000000
|
||||
+
|
||||
+#define AT91_SMART_MEDIA_ALE (1 << 21) /* our ALE is AD21 */
|
||||
+#define AT91_SMART_MEDIA_CLE (1 << 22) /* our CLE is AD22 */
|
||||
+
|
||||
+#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
|
||||
+#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
|
||||
+
|
||||
+#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
|
||||
+
|
||||
+
|
||||
+/* ******************************************************************** */
|
||||
+/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 100000000.*/
|
||||
+/* Please refer to SMC section in AT91SAM9 datasheet to learn how */
|
||||
+/* to generate these values. */
|
||||
+/* ******************************************************************** */
|
||||
+#define AT91C_SM_NWE_SETUP (1 << 0)
|
||||
+#define AT91C_SM_NCS_WR_SETUP (0 << 8)
|
||||
+#define AT91C_SM_NRD_SETUP (1 << 16)
|
||||
+#define AT91C_SM_NCS_RD_SETUP (0 << 24)
|
||||
+
|
||||
+#define AT91C_SM_NWE_PULSE (3 << 0)
|
||||
+#define AT91C_SM_NCS_WR_PULSE (3 << 8)
|
||||
+#define AT91C_SM_NRD_PULSE (3 << 16)
|
||||
+#define AT91C_SM_NCS_RD_PULSE (3 << 24)
|
||||
+
|
||||
+#define AT91C_SM_NWE_CYCLE (5 << 0)
|
||||
+#define AT91C_SM_NRD_CYCLE (5 << 16)
|
||||
+
|
||||
+#define AT91C_SM_TDF (2 << 16)
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* BootStrap Settings */
|
||||
+/* */
|
||||
+/* ******************************************************************* */
|
||||
+#define IMG_ADDRESS 0x20000 /* Image Address in NandFlash */
|
||||
+#define IMG_SIZE 0x40000 /* Image Size in NandFlash */
|
||||
+
|
||||
+#define MACH_TYPE 0x80B /* TNY-A9G20 */
|
||||
+#define JUMP_ADDR 0x23F00000 /* Final Jump Address */
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* Application Settings */
|
||||
+/* ******************************************************************* */
|
||||
+#undef CFG_DEBUG
|
||||
+#undef CFG_DATAFLASH
|
||||
+
|
||||
+#define CFG_NANDFLASH
|
||||
+#undef NANDFLASH_SMALL_BLOCKS /* NANDFLASH_LARGE_BLOCKS used instead */
|
||||
+
|
||||
+#define CFG_SDRAM
|
||||
+#define CFG_HW_INIT
|
||||
+
|
||||
+#endif /* _TNY_A9G20_LPW_H */
|
||||
diff --git a/board/tny_a9g20_lpw/tny_a9g20_lpw.c b/board/tny_a9g20_lpw/tny_a9g20_lpw.c
|
||||
new file mode 100644
|
||||
index 0000000..cef9055
|
||||
--- /dev/null
|
||||
+++ b/board/tny_a9g20_lpw/tny_a9g20_lpw.c
|
||||
@@ -0,0 +1,243 @@
|
||||
+/* ----------------------------------------------------------------------------
|
||||
+ * ATMEL Microcontroller Software Support - ROUSSET -
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * Copyright (c) 2008, Atmel Corporation
|
||||
+
|
||||
+ * All rights reserved.
|
||||
+ *
|
||||
+ * Redistribution and use in source and binary forms, with or without
|
||||
+ * modification, are permitted provided that the following conditions are met:
|
||||
+ *
|
||||
+ * - Redistributions of source code must retain the above copyright notice,
|
||||
+ * this list of conditions and the disclaimer below.
|
||||
+ *
|
||||
+ * Atmel's name may not be used to endorse or promote products derived from
|
||||
+ * this software without specific prior written permission.
|
||||
+ *
|
||||
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
||||
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||||
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * File Name : tny_a9g20_lpw.c
|
||||
+ * Object :
|
||||
+ * Creation : GH August 13th 2012
|
||||
+ *-----------------------------------------------------------------------------
|
||||
+ */
|
||||
+#include "../../include/part.h"
|
||||
+#include "../../include/gpio.h"
|
||||
+#include "../../include/pmc.h"
|
||||
+#include "../../include/debug.h"
|
||||
+#include "../../include/sdramc.h"
|
||||
+#include "../../include/main.h"
|
||||
+#ifdef CFG_NANDFLASH
|
||||
+#include "../../include/nandflash.h"
|
||||
+#endif
|
||||
+
|
||||
+static inline unsigned int get_cp15(void)
|
||||
+{
|
||||
+ unsigned int value;
|
||||
+ __asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
|
||||
+ return value;
|
||||
+}
|
||||
+
|
||||
+static inline void set_cp15(unsigned int value)
|
||||
+{
|
||||
+ __asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
|
||||
+}
|
||||
+
|
||||
+#ifdef CFG_HW_INIT
|
||||
+/*----------------------------------------------------------------------------*/
|
||||
+/* \fn hw_init */
|
||||
+/* \brief This function performs very low level HW initialization */
|
||||
+/* This function is invoked as soon as possible during the c_startup */
|
||||
+/* The bss segment must be initialized */
|
||||
+/*----------------------------------------------------------------------------*/
|
||||
+void hw_init(void)
|
||||
+{
|
||||
+ unsigned int cp15;
|
||||
+
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc hw_pio[] = {
|
||||
+#ifdef CFG_DEBUG
|
||||
+ {"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+#endif
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Disable watchdog */
|
||||
+ writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
|
||||
+
|
||||
+ /* At this stage the main oscillator is supposed to be enabled
|
||||
+ * PCK = MCK = MOSC */
|
||||
+ writel(0x00, AT91C_BASE_PMC + PMC_PLLICPR);
|
||||
+
|
||||
+ /* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
|
||||
+ pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
|
||||
+
|
||||
+ /* PCK = PLLA/2 = 3 * MCK */
|
||||
+ pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
|
||||
+ /* Switch MCK on PLLA output */
|
||||
+ pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
|
||||
+
|
||||
+ /* Configure PLLB */
|
||||
+ pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
|
||||
+
|
||||
+ /* Configure CP15 */
|
||||
+ cp15 = get_cp15();
|
||||
+ cp15 |= I_CACHE;
|
||||
+ set_cp15(cp15);
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ pio_setup(hw_pio);
|
||||
+
|
||||
+ /* Configure the EBI Slave Slot Cycle to 64 */
|
||||
+ writel((readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
|
||||
+
|
||||
+#ifdef CFG_DEBUG
|
||||
+ /* Enable Debug messages on the DBGU */
|
||||
+ dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
|
||||
+
|
||||
+ dbg_print("Start AT91Bootstrap...\n\r");
|
||||
+#endif /* CFG_DEBUG */
|
||||
+
|
||||
+#ifdef CFG_SDRAM
|
||||
+ /* Initialize the matrix (slow slew rate enabled and LPSDRAM memory voltage = 1.8V) */
|
||||
+ writel(((readl(AT91C_BASE_CCFG + CCFG_EBICSA)) | AT91C_EBI_CS1A_SDRAMC | (1<<17)) & ~0x00010000, AT91C_BASE_CCFG + CCFG_EBICSA);
|
||||
+
|
||||
+ /* Configure SDRAM Controller */
|
||||
+ sdram_init( AT91C_SDRAMC_NC_9 |
|
||||
+ AT91C_SDRAMC_NR_13 |
|
||||
+ AT91C_SDRAMC_CAS_3 |
|
||||
+ AT91C_SDRAMC_NB_4_BANKS |
|
||||
+ AT91C_SDRAMC_DBW_32_BITS |
|
||||
+ AT91C_SDRAMC_TWR_2 |
|
||||
+ AT91C_SDRAMC_TRC_7 |
|
||||
+ AT91C_SDRAMC_TRP_2 |
|
||||
+ AT91C_SDRAMC_TRCD_2 |
|
||||
+ AT91C_SDRAMC_TRAS_5 |
|
||||
+ AT91C_SDRAMC_TXSR_8, /* Control Register */
|
||||
+ (MASTER_CLOCK * 7)/1000000, /* Refresh Timer Register */
|
||||
+ AT91C_SDRAMC_MD_LOW_POWER_SDRAM); /* SDRAM (low power) */
|
||||
+
|
||||
+#endif /* CFG_SDRAM */
|
||||
+}
|
||||
+#endif /* CFG_HW_INIT */
|
||||
+
|
||||
+#ifdef CFG_SDRAM
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn sdramc_hw_init */
|
||||
+/* \brief This function performs SDRAMC HW initialization */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void sdramc_hw_init(void)
|
||||
+{
|
||||
+ /* Configure PIOs */
|
||||
+/* const struct pio_desc sdramc_pio[] = {
|
||||
+ {"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+*/
|
||||
+ /* Configure the SDRAMC PIO controller to output PCK0 */
|
||||
+/* pio_setup(sdramc_pio); */
|
||||
+
|
||||
+ writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
|
||||
+ writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
|
||||
+
|
||||
+}
|
||||
+#endif /* CFG_SDRAM */
|
||||
+
|
||||
+#ifdef CFG_NANDFLASH
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn nand_recovery */
|
||||
+/* \brief This function erases NandFlash Block 0 if BP4 is pressed */
|
||||
+/* during boot sequence */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+static void nand_recovery(void)
|
||||
+{
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc bp4_pio[] = {
|
||||
+ {"BP4", AT91C_PIN_PA(31), 0, PIO_PULLUP, PIO_INPUT},
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ writel((1 << AT91C_ID_PIOA), PMC_PCER + AT91C_BASE_PMC);
|
||||
+ pio_setup(bp4_pio);
|
||||
+
|
||||
+ /* If BP4 is pressed during Boot sequence */
|
||||
+ /* Erase NandFlash block 0*/
|
||||
+ if (!pio_get_value(AT91C_PIN_PA(31)) )
|
||||
+ AT91F_NandEraseBlock0();
|
||||
+}
|
||||
+
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn nandflash_hw_init */
|
||||
+/* \brief NandFlash HW init */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void nandflash_hw_init(void)
|
||||
+{
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc nand_pio[] = {
|
||||
+ {"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
|
||||
+ {"NANDCS", AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
|
||||
+ writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
|
||||
+
|
||||
+ /* Configure SMC CS3 */
|
||||
+ writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
|
||||
+ writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
|
||||
+ writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE) , AT91C_BASE_SMC + SMC_CYCLE3);
|
||||
+ writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE |
|
||||
+ AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF) , AT91C_BASE_SMC + SMC_CTRL3);
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
|
||||
+ pio_setup(nand_pio);
|
||||
+
|
||||
+ nand_recovery();
|
||||
+}
|
||||
+
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn nandflash_cfg_16bits_dbw_init */
|
||||
+/* \brief Configure SMC in 16 bits mode */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void nandflash_cfg_16bits_dbw_init(void)
|
||||
+{
|
||||
+ writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
|
||||
+}
|
||||
+
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn nandflash_cfg_8bits_dbw_init */
|
||||
+/* \brief Configure SMC in 8 bits mode */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void nandflash_cfg_8bits_dbw_init(void)
|
||||
+{
|
||||
+ writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
|
||||
+}
|
||||
+
|
||||
+#endif /* #ifdef CFG_NANDFLASH */
|
||||
diff --git a/crt0_gnu.S b/crt0_gnu.S
|
||||
index 042b617..c6cd49d 100644
|
||||
--- a/crt0_gnu.S
|
||||
+++ b/crt0_gnu.S
|
||||
@@ -106,6 +106,12 @@ _relocate_to_sram:
|
||||
#endif /* CFG_NORFLASH */
|
||||
|
||||
_setup_clocks:
|
||||
+/* Test if main osc is bypassed */
|
||||
+ ldr r0,=AT91C_PMC_MOR
|
||||
+ ldr r1, [r0]
|
||||
+ ldr r2,=AT91C_CKGR_OSCBYPASS
|
||||
+ ands r1, r1, r2
|
||||
+ bne _init_data /* branch if OSCBYPASS=1 */
|
||||
/* Test if main oscillator is enabled */
|
||||
ldr r0,=AT91C_PMC_SR
|
||||
ldr r1, [r0]
|
||||
diff --git a/include/part.h b/include/part.h
|
||||
index ba5985a..ab79af1 100644
|
||||
--- a/include/part.h
|
||||
+++ b/include/part.h
|
||||
@@ -46,7 +46,11 @@
|
||||
|
||||
#ifdef AT91SAM9G20
|
||||
#include "AT91SAM9260_inc.h"
|
||||
-#include "at91sam9g20ek.h"
|
||||
+ #ifdef at91sam9g20ek
|
||||
+ #include "at91sam9g20ek.h"
|
||||
+ #elif tny_a9g20_lpw
|
||||
+ #include "tny-a9g20-lpw.h"
|
||||
+ #endif
|
||||
#endif
|
||||
|
||||
#ifdef AT91SAM9261
|
||||
--
|
||||
1.7.9.5
|
||||
|
|
@ -0,0 +1,187 @@
|
|||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_KALLSYMS_ALL=y
|
||||
CONFIG_EMBEDDED=y
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_LBDAF is not set
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_SOC_AT91SAM9260=y
|
||||
CONFIG_SOC_AT91SAM9263=y
|
||||
CONFIG_SOC_AT91SAM9G45=y
|
||||
CONFIG_SOC_AT91SAM9X5=y
|
||||
CONFIG_SOC_AT91SAM9N12=y
|
||||
CONFIG_MACH_AT91SAM_DT=y
|
||||
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
||||
CONFIG_AT91_TIMER_HZ=128
|
||||
CONFIG_AEABI=y
|
||||
# CONFIG_OABI_COMPAT is not set
|
||||
CONFIG_UACCESS_WITH_MEMCPY=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_ARM_APPENDED_DTB=y
|
||||
CONFIG_ARM_ATAG_DTB_COMPAT=y
|
||||
CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
|
||||
CONFIG_KEXEC=y
|
||||
CONFIG_AUTO_ZRELADDR=y
|
||||
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
CONFIG_IP_PNP=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
# CONFIG_INET_DIAG is not set
|
||||
CONFIG_IPV6=y
|
||||
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET6_XFRM_MODE_BEET is not set
|
||||
CONFIG_IPV6_SIT_6RD=y
|
||||
# CONFIG_WIRELESS is not set
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
# CONFIG_STANDALONE is not set
|
||||
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ATMEL=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_GLUEBI=y
|
||||
CONFIG_PROC_DEVICETREE=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=4
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
CONFIG_ATMEL_PWM=y
|
||||
CONFIG_ATMEL_TCLIB=y
|
||||
CONFIG_EEPROM_93CX6=m
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
# CONFIG_SCSI_LOWLEVEL is not set
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_MACB=y
|
||||
# CONFIG_NET_VENDOR_BROADCOM is not set
|
||||
# CONFIG_NET_VENDOR_FARADAY is not set
|
||||
# CONFIG_NET_VENDOR_INTEL is not set
|
||||
# CONFIG_NET_VENDOR_MARVELL is not set
|
||||
# CONFIG_NET_VENDOR_MICREL is not set
|
||||
# CONFIG_NET_VENDOR_NATSEMI is not set
|
||||
# CONFIG_NET_VENDOR_SEEQ is not set
|
||||
# CONFIG_NET_VENDOR_SMSC is not set
|
||||
# CONFIG_NET_VENDOR_STMICRO is not set
|
||||
CONFIG_DAVICOM_PHY=y
|
||||
CONFIG_MICREL_PHY=y
|
||||
# CONFIG_WLAN is not set
|
||||
CONFIG_INPUT_POLLDEV=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
|
||||
CONFIG_INPUT_JOYDEV=y
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
# CONFIG_KEYBOARD_ATKBD is not set
|
||||
CONFIG_KEYBOARD_GPIO=y
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
CONFIG_INPUT_TOUCHSCREEN=y
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_LEGACY_PTY_COUNT=4
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_GPIO=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_ATMEL=y
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_AT91SAM9X_WATCHDOG=y
|
||||
CONFIG_SSB=m
|
||||
CONFIG_FB=y
|
||||
CONFIG_FB_MODE_HELPERS=y
|
||||
CONFIG_FB_ATMEL=y
|
||||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
# CONFIG_LCD_CLASS_DEVICE is not set
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
||||
CONFIG_BACKLIGHT_ATMEL_LCDC=y
|
||||
# CONFIG_BACKLIGHT_GENERIC is not set
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
|
||||
CONFIG_FONTS=y
|
||||
CONFIG_FONT_8x8=y
|
||||
CONFIG_FONT_ACORN_8x8=y
|
||||
CONFIG_FONT_MINI_4x6=y
|
||||
CONFIG_LOGO=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_ACM=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_SERIAL=y
|
||||
CONFIG_USB_SERIAL_GENERIC=y
|
||||
CONFIG_USB_SERIAL_FTDI_SIO=y
|
||||
CONFIG_USB_SERIAL_PL2303=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_AT91=m
|
||||
CONFIG_USB_ETH=m
|
||||
CONFIG_USB_GADGETFS=m
|
||||
CONFIG_USB_CDC_COMPOSITE=m
|
||||
CONFIG_USB_G_ACM_MS=m
|
||||
CONFIG_USB_G_MULTI=m
|
||||
CONFIG_USB_G_MULTI_CDC=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_ATMELMCI=y
|
||||
CONFIG_MMC_SPI=y
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
CONFIG_LEDS_TRIGGER_TIMER=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_LEDS_TRIGGER_GPIO=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_AT91RM9200=y
|
||||
CONFIG_RTC_DRV_AT91SAM9=y
|
||||
CONFIG_DMADEVICES=y
|
||||
# CONFIG_IOMMU_SUPPORT is not set
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_FANOTIFY=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_CODEPAGE_850=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_STRIP_ASM_SYMS=y
|
||||
CONFIG_DEBUG_FS=y
|
||||
# CONFIG_SCHED_DEBUG is not set
|
||||
# CONFIG_DEBUG_BUGVERBOSE is not set
|
||||
# CONFIG_FTRACE is not set
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_CRYPTO_ECB=y
|
||||
CONFIG_CRYPTO_ARC4=y
|
||||
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
||||
CONFIG_CRYPTO_USER_API_HASH=m
|
||||
CONFIG_CRYPTO_USER_API_SKCIPHER=m
|
||||
# CONFIG_CRYPTO_HW is not set
|
||||
CONFIG_CRC_CCITT=m
|
||||
CONFIG_AVERAGE=y
|
|
@ -0,0 +1,603 @@
|
|||
From 43e8c90f13806405bde8eaaf3a956d0ddc806f64 Mon Sep 17 00:00:00 2001
|
||||
From: Gregory Hermant <gregory.hermant@calao-systems.com>
|
||||
Date: Tue, 2 Oct 2012 09:19:15 +0200
|
||||
Subject: [PATCH] Add support for the USB-A9260
|
||||
|
||||
|
||||
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
|
||||
---
|
||||
board/usb_a9260/nandflash/Makefile | 122 ++++++++++++++
|
||||
board/usb_a9260/nandflash/usb-a9260.h | 109 ++++++++++++
|
||||
board/usb_a9260/usb_a9260.c | 298 +++++++++++++++++++++++++++++++++
|
||||
crt0_gnu.S | 7 +
|
||||
include/part.h | 6 +-
|
||||
5 files changed, 541 insertions(+), 1 deletion(-)
|
||||
create mode 100644 board/usb_a9260/nandflash/Makefile
|
||||
create mode 100644 board/usb_a9260/nandflash/usb-a9260.h
|
||||
create mode 100644 board/usb_a9260/usb_a9260.c
|
||||
|
||||
diff --git a/board/usb_a9260/nandflash/Makefile b/board/usb_a9260/nandflash/Makefile
|
||||
new file mode 100644
|
||||
index 0000000..02f4b50
|
||||
--- /dev/null
|
||||
+++ b/board/usb_a9260/nandflash/Makefile
|
||||
@@ -0,0 +1,122 @@
|
||||
+# TODO: set this appropriately for your local toolchain
|
||||
+ifndef ERASE_FCT
|
||||
+ERASE_FCT=rm -f
|
||||
+endif
|
||||
+ifndef CROSS_COMPILE
|
||||
+CROSS_COMPILE=arm-elf-
|
||||
+endif
|
||||
+
|
||||
+TOOLCHAIN=gcc
|
||||
+
|
||||
+BOOTSTRAP_PATH=../../..
|
||||
+
|
||||
+# NandFlashBoot Configuration for USB-A9260
|
||||
+
|
||||
+# Target name (case sensitive!!!)
|
||||
+TARGET=AT91SAM9260
|
||||
+# Board name (case sensitive!!!)
|
||||
+BOARD=usb_a9260
|
||||
+# Link Address and Top_of_Memory
|
||||
+LINK_ADDR=0x200000
|
||||
+TOP_OF_MEMORY=0x301000
|
||||
+# Name of current directory
|
||||
+PROJECT=nandflash
|
||||
+
|
||||
+ifndef BOOT_NAME
|
||||
+BOOT_NAME=$(PROJECT)_$(BOARD)
|
||||
+endif
|
||||
+
|
||||
+INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
|
||||
+
|
||||
+ifeq ($(TOOLCHAIN), gcc)
|
||||
+
|
||||
+AS=$(CROSS_COMPILE)gcc
|
||||
+CC=$(CROSS_COMPILE)gcc
|
||||
+LD=$(CROSS_COMPILE)gcc
|
||||
+NM= $(CROSS_COMPILE)nm
|
||||
+SIZE=$(CROSS_COMPILE)size
|
||||
+OBJCOPY=$(CROSS_COMPILE)objcopy
|
||||
+OBJDUMP=$(CROSS_COMPILE)objdump
|
||||
+CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
|
||||
+ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
|
||||
+
|
||||
+# Linker flags.
|
||||
+# -Wl,...: tell GCC to pass this to linker.
|
||||
+# -Map: create map file
|
||||
+# --cref: add cross reference to map file
|
||||
+LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
|
||||
+LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
|
||||
+OBJS=crt0_gnu.o
|
||||
+
|
||||
+endif
|
||||
+
|
||||
+OBJS+=\
|
||||
+ $(BOARD).o \
|
||||
+ main.o \
|
||||
+ gpio.o \
|
||||
+ pmc.o \
|
||||
+ debug.o \
|
||||
+ sdramc.o \
|
||||
+ nandflash.o \
|
||||
+ _udivsi3.o \
|
||||
+ _umodsi3.o \
|
||||
+ div0.o \
|
||||
+ udiv.o \
|
||||
+ string.o
|
||||
+
|
||||
+
|
||||
+rebuild: clean all
|
||||
+
|
||||
+all: $(BOOT_NAME)
|
||||
+
|
||||
+ifeq ($(TOOLCHAIN), gcc)
|
||||
+$(BOOT_NAME): $(OBJS)
|
||||
+ $(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
|
||||
+ $(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
|
||||
+endif
|
||||
+
|
||||
+
|
||||
+$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
|
||||
+
|
||||
+main.o: $(BOOTSTRAP_PATH)/main.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
|
||||
+
|
||||
+gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
|
||||
+
|
||||
+pmc.o: $(BOOTSTRAP_PATH)/driver/pmc.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
|
||||
+
|
||||
+debug.o: $(BOOTSTRAP_PATH)/driver/debug.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
|
||||
+
|
||||
+sdramc.o: $(BOOTSTRAP_PATH)/driver/sdramc.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
|
||||
+
|
||||
+dataflash.o: $(BOOTSTRAP_PATH)/driver/dataflash.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
|
||||
+
|
||||
+nandflash.o: $(BOOTSTRAP_PATH)/driver/nandflash.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
|
||||
+
|
||||
+crt0_gnu.o: $(BOOTSTRAP_PATH)/crt0_gnu.S
|
||||
+ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
|
||||
+
|
||||
+div0.o: $(BOOTSTRAP_PATH)/lib/div0.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
|
||||
+
|
||||
+string.o: $(BOOTSTRAP_PATH)/lib/string.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
|
||||
+
|
||||
+udiv.o: $(BOOTSTRAP_PATH)/lib/udiv.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
|
||||
+
|
||||
+_udivsi3.o: $(BOOTSTRAP_PATH)/lib/_udivsi3.S
|
||||
+ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
|
||||
+
|
||||
+_umodsi3.o: $(BOOTSTRAP_PATH)/lib/_umodsi3.S
|
||||
+ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
|
||||
+
|
||||
+clean:
|
||||
+ $(ERASE_FCT) *.o *.bin *.elf *.map
|
||||
diff --git a/board/usb_a9260/nandflash/usb-a9260.h b/board/usb_a9260/nandflash/usb-a9260.h
|
||||
new file mode 100644
|
||||
index 0000000..2aaf759
|
||||
--- /dev/null
|
||||
+++ b/board/usb_a9260/nandflash/usb-a9260.h
|
||||
@@ -0,0 +1,109 @@
|
||||
+/* ----------------------------------------------------------------------------
|
||||
+ * ATMEL Microcontroller Software Support - ROUSSET -
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * Copyright (c) 2006, Atmel Corporation
|
||||
+
|
||||
+ * All rights reserved.
|
||||
+ *
|
||||
+ * Redistribution and use in source and binary forms, with or without
|
||||
+ * modification, are permitted provided that the following conditions are met:
|
||||
+ *
|
||||
+ * - Redistributions of source code must retain the above copyright notice,
|
||||
+ * this list of conditions and the disclaimer below.
|
||||
+ *
|
||||
+ * Atmel's name may not be used to endorse or promote products derived from
|
||||
+ * this software without specific prior written permission.
|
||||
+ *
|
||||
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
||||
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||||
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * File Name : usb-a9260.h
|
||||
+ * Object :
|
||||
+ * Creation : GH Oct 1th 2012
|
||||
+ *-----------------------------------------------------------------------------
|
||||
+ */
|
||||
+#ifndef _USB_A9260_H
|
||||
+#define _USB_A9260_H
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* PMC Settings */
|
||||
+/* */
|
||||
+/* The main oscillator is enabled as soon as possible in the c_startup */
|
||||
+/* and MCK is switched on the main oscillator. */
|
||||
+/* PLL initialization is done later in the hw_init() function */
|
||||
+/* ******************************************************************* */
|
||||
+#define MASTER_CLOCK (180000000/2)
|
||||
+#define PLL_LOCK_TIMEOUT 1000000
|
||||
+
|
||||
+#define PLLA_SETTINGS 0x20593F06
|
||||
+#define PLLB_SETTINGS 0x10483F0E
|
||||
+
|
||||
+/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
|
||||
+#define MCKR_SETTINGS (AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
|
||||
+#define MCKR_CSS_SETTINGS (AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* NandFlash Settings */
|
||||
+/* */
|
||||
+/* ******************************************************************* */
|
||||
+#define AT91C_SMARTMEDIA_BASE 0x40000000
|
||||
+
|
||||
+#define AT91_SMART_MEDIA_ALE (1 << 21) /* our ALE is AD21 */
|
||||
+#define AT91_SMART_MEDIA_CLE (1 << 22) /* our CLE is AD22 */
|
||||
+
|
||||
+#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
|
||||
+#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
|
||||
+
|
||||
+#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
|
||||
+
|
||||
+
|
||||
+/* ******************************************************************** */
|
||||
+/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 90000000.*/
|
||||
+/* Please refer to SMC section in AT91SAM datasheet to learn how */
|
||||
+/* to generate these values. */
|
||||
+/* ******************************************************************** */
|
||||
+#define AT91C_SM_NWE_SETUP (1 << 0)
|
||||
+#define AT91C_SM_NCS_WR_SETUP (0 << 8)
|
||||
+#define AT91C_SM_NRD_SETUP (1 << 16)
|
||||
+#define AT91C_SM_NCS_RD_SETUP (0 << 24)
|
||||
+
|
||||
+#define AT91C_SM_NWE_PULSE (3 << 0)
|
||||
+#define AT91C_SM_NCS_WR_PULSE (3 << 8)
|
||||
+#define AT91C_SM_NRD_PULSE (3 << 16)
|
||||
+#define AT91C_SM_NCS_RD_PULSE (3 << 24)
|
||||
+
|
||||
+#define AT91C_SM_NWE_CYCLE (5 << 0)
|
||||
+#define AT91C_SM_NRD_CYCLE (5 << 16)
|
||||
+#define AT91C_SM_TDF (2 << 16)
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* BootStrap Settings */
|
||||
+/* */
|
||||
+/* ******************************************************************* */
|
||||
+#define IMG_ADDRESS 0x20000 /* Image Address in NandFlash */
|
||||
+#define IMG_SIZE 0x40000 /* Image Size in NandFlash */
|
||||
+
|
||||
+#define MACH_TYPE 0x6AD /* USB-A9260 */
|
||||
+#define JUMP_ADDR 0x23F00000 /* Final Jump Address */
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* Application Settings */
|
||||
+/* ******************************************************************* */
|
||||
+#undef CFG_DEBUG
|
||||
+#undef CFG_DATAFLASH
|
||||
+
|
||||
+#define CFG_NANDFLASH
|
||||
+#undef NANDFLASH_SMALL_BLOCKS /* NANDFLASH_LARGE_BLOCKS used instead */
|
||||
+
|
||||
+#define CFG_HW_INIT
|
||||
+#define CFG_SDRAM
|
||||
+
|
||||
+#endif /* _USB_A9260_H */
|
||||
diff --git a/board/usb_a9260/usb_a9260.c b/board/usb_a9260/usb_a9260.c
|
||||
new file mode 100644
|
||||
index 0000000..de30f0b
|
||||
--- /dev/null
|
||||
+++ b/board/usb_a9260/usb_a9260.c
|
||||
@@ -0,0 +1,298 @@
|
||||
+/* ----------------------------------------------------------------------------
|
||||
+ * ATMEL Microcontroller Software Support - ROUSSET -
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * Copyright (c) 2006, Atmel Corporation
|
||||
+
|
||||
+ * All rights reserved.
|
||||
+ *
|
||||
+ * Redistribution and use in source and binary forms, with or without
|
||||
+ * modification, are permitted provided that the following conditions are met:
|
||||
+ *
|
||||
+ * - Redistributions of source code must retain the above copyright notice,
|
||||
+ * this list of conditions and the disclaiimer below.
|
||||
+ *
|
||||
+ * Atmel's name may not be used to endorse or promote products derived from
|
||||
+ * this software without specific prior written permission.
|
||||
+ *
|
||||
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
||||
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||||
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * File Name : usb_a9260.c
|
||||
+ * Object :
|
||||
+ * Creation : GH Oct 1th 2012
|
||||
+ *-----------------------------------------------------------------------------
|
||||
+ */
|
||||
+#include "../../include/part.h"
|
||||
+#include "../../include/gpio.h"
|
||||
+#include "../../include/pmc.h"
|
||||
+#include "../../include/debug.h"
|
||||
+#include "../../include/sdramc.h"
|
||||
+#include "../../include/main.h"
|
||||
+#ifdef CFG_NANDFLASH
|
||||
+#include "../../include/nandflash.h"
|
||||
+#endif
|
||||
+#ifdef CFG_DATAFLASH
|
||||
+#include "../../include/dataflash.h"
|
||||
+#endif
|
||||
+
|
||||
+static inline unsigned int get_cp15(void)
|
||||
+{
|
||||
+ unsigned int value;
|
||||
+ __asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
|
||||
+ return value;
|
||||
+}
|
||||
+
|
||||
+static inline void set_cp15(unsigned int value)
|
||||
+{
|
||||
+ __asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
|
||||
+}
|
||||
+
|
||||
+#ifdef CFG_HW_INIT
|
||||
+/*----------------------------------------------------------------------------*/
|
||||
+/* \fn hw_init */
|
||||
+/* \brief This function performs very low level HW initialization */
|
||||
+/* This function is invoked as soon as possible during the c_startup */
|
||||
+/* The bss segment must be initialized */
|
||||
+/*----------------------------------------------------------------------------*/
|
||||
+void hw_init(void)
|
||||
+{
|
||||
+ unsigned int cp15;
|
||||
+
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc hw_pio[] = {
|
||||
+#ifdef CFG_DEBUG
|
||||
+ {"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+#endif
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Disable watchdog */
|
||||
+ writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
|
||||
+
|
||||
+ /* At this stage the main oscillator is supposed to be enabled
|
||||
+ * PCK = MCK = MOSC */
|
||||
+
|
||||
+ /* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
|
||||
+ pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
|
||||
+
|
||||
+ /* PCK = PLLA = 2 * MCK */
|
||||
+ pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
|
||||
+ /* Switch MCK on PLLA output */
|
||||
+ pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
|
||||
+
|
||||
+ /* Configure PLLB */
|
||||
+ pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
|
||||
+
|
||||
+ /* Configure CP15 */
|
||||
+ cp15 = get_cp15();
|
||||
+ cp15 |= I_CACHE;
|
||||
+ set_cp15(cp15);
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ pio_setup(hw_pio);
|
||||
+
|
||||
+ /* Configure the EBI Slave Slot Cycle to 64 */
|
||||
+ writel( (readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
|
||||
+
|
||||
+#ifdef CFG_DEBUG
|
||||
+ /* Enable Debug messages on the DBGU */
|
||||
+ dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
|
||||
+
|
||||
+ dbg_print("Start AT91Bootstrap...\n\r");
|
||||
+#endif /* CFG_DEBUG */
|
||||
+
|
||||
+#ifdef CFG_SDRAM
|
||||
+ /* Initialize the matrix */
|
||||
+ writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBICSA);
|
||||
+
|
||||
+ /* Configure SDRAM Controller */
|
||||
+ sdram_init( AT91C_SDRAMC_NC_9 |
|
||||
+ AT91C_SDRAMC_NR_13 |
|
||||
+ AT91C_SDRAMC_CAS_2 |
|
||||
+ AT91C_SDRAMC_NB_4_BANKS |
|
||||
+ AT91C_SDRAMC_DBW_32_BITS |
|
||||
+ AT91C_SDRAMC_TWR_2 |
|
||||
+ AT91C_SDRAMC_TRC_7 |
|
||||
+ AT91C_SDRAMC_TRP_2 |
|
||||
+ AT91C_SDRAMC_TRCD_2 |
|
||||
+ AT91C_SDRAMC_TRAS_5 |
|
||||
+ AT91C_SDRAMC_TXSR_8, /* Control Register */
|
||||
+ (MASTER_CLOCK * 7)/1000000, /* Refresh Timer Register */
|
||||
+ AT91C_SDRAMC_MD_SDRAM); /* SDRAM (no low power) */
|
||||
+
|
||||
+
|
||||
+#endif /* CFG_SDRAM */
|
||||
+}
|
||||
+#endif /* CFG_HW_INIT */
|
||||
+
|
||||
+#ifdef CFG_SDRAM
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn sdramc_hw_init */
|
||||
+/* \brief This function performs SDRAMC HW initialization */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void sdramc_hw_init(void)
|
||||
+{
|
||||
+ /* Configure PIOs */
|
||||
+/* const struct pio_desc sdramc_pio[] = {
|
||||
+ {"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+*/
|
||||
+ /* Configure the SDRAMC PIO controller to output PCK0 */
|
||||
+/* pio_setup(sdramc_pio); */
|
||||
+
|
||||
+ writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
|
||||
+ writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
|
||||
+
|
||||
+}
|
||||
+#endif /* CFG_SDRAM */
|
||||
+
|
||||
+#ifdef CFG_DATAFLASH
|
||||
+
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn df_recovery */
|
||||
+/* \brief This function erases DataFlash Page 0 if USR PB is pressed */
|
||||
+/* during boot sequence */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void df_recovery(AT91PS_DF pDf)
|
||||
+{
|
||||
+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc usrpb_pio[] = {
|
||||
+ {"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
|
||||
+ pio_setup(usrpb_pio);
|
||||
+
|
||||
+ /* If USR PB is pressed during Boot sequence */
|
||||
+ /* Erase DataFlash Page 0*/
|
||||
+ if ( !pio_get_value(AT91C_PIN_PB(10)) )
|
||||
+ df_page_erase(pDf, 0);
|
||||
+#endif
|
||||
+}
|
||||
+
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn df_hw_init */
|
||||
+/* \brief This function performs DataFlash HW initialization */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void df_hw_init(void)
|
||||
+{
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc df_pio[] = {
|
||||
+ {"MISO", AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"MOSI", AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"SPCK", AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
|
||||
+ {"NPCS0", AT91C_PIN_PA(3), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+#endif
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ pio_setup(df_pio);
|
||||
+}
|
||||
+#endif /* CFG_DATAFLASH */
|
||||
+
|
||||
+
|
||||
+
|
||||
+#ifdef CFG_NANDFLASH
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn nand_recovery */
|
||||
+/* \brief This function erases NandFlash Block 0 if USR PB is pressed */
|
||||
+/* during boot sequence */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+static void nand_recovery(void)
|
||||
+{
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc usrpb_pio[] = {
|
||||
+ {"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
|
||||
+ pio_setup(usrpb_pio);
|
||||
+
|
||||
+ /* If USR PB is pressed during Boot sequence */
|
||||
+ /* Erase NandFlash block 0*/
|
||||
+ if (!pio_get_value(AT91C_PIN_PB(10)) )
|
||||
+ AT91F_NandEraseBlock0();
|
||||
+}
|
||||
+
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn nandflash_hw_init */
|
||||
+/* \brief NandFlash HW init */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void nandflash_hw_init(void)
|
||||
+{
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc nand_pio[] = {
|
||||
+ {"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
|
||||
+ {"NANDCS", AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
|
||||
+ writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
|
||||
+
|
||||
+ /* Configure SMC CS3 */
|
||||
+ writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
|
||||
+ writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
|
||||
+ writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE) , AT91C_BASE_SMC + SMC_CYCLE3);
|
||||
+ writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE |
|
||||
+ AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF) , AT91C_BASE_SMC + SMC_CTRL3);
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
|
||||
+ pio_setup(nand_pio);
|
||||
+
|
||||
+ nand_recovery();
|
||||
+}
|
||||
+
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn nandflash_cfg_16bits_dbw_init */
|
||||
+/* \brief Configure SMC in 16 bits mode */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void nandflash_cfg_16bits_dbw_init(void)
|
||||
+{
|
||||
+ writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
|
||||
+}
|
||||
+
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn nandflash_cfg_8bits_dbw_init */
|
||||
+/* \brief Configure SMC in 8 bits mode */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void nandflash_cfg_8bits_dbw_init(void)
|
||||
+{
|
||||
+ writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
|
||||
+}
|
||||
+
|
||||
+
|
||||
+#endif /* #ifdef CFG_NANDFLASH */
|
||||
diff --git a/crt0_gnu.S b/crt0_gnu.S
|
||||
index 042b617..002feef 100644
|
||||
--- a/crt0_gnu.S
|
||||
+++ b/crt0_gnu.S
|
||||
@@ -106,6 +106,13 @@ _relocate_to_sram:
|
||||
#endif /* CFG_NORFLASH */
|
||||
|
||||
_setup_clocks:
|
||||
+/* Test if main osc is bypassed */
|
||||
+ ldr r0,=AT91C_PMC_MOR
|
||||
+ ldr r1, [r0]
|
||||
+ ldr r2,=AT91C_CKGR_OSCBYPASS
|
||||
+ ands r1, r1, r2
|
||||
+ bne _init_data /* branch if OSCBYPASS=1 */
|
||||
+
|
||||
/* Test if main oscillator is enabled */
|
||||
ldr r0,=AT91C_PMC_SR
|
||||
ldr r1, [r0]
|
||||
diff --git a/include/part.h b/include/part.h
|
||||
index ba5985a..212789f 100644
|
||||
--- a/include/part.h
|
||||
+++ b/include/part.h
|
||||
@@ -35,7 +35,11 @@
|
||||
|
||||
#ifdef AT91SAM9260
|
||||
#include "AT91SAM9260_inc.h"
|
||||
-#include "at91sam9260ek.h"
|
||||
+ #ifdef at91sam9260ek
|
||||
+ #include "at91sam9260ek.h"
|
||||
+ #elif usb_a9260
|
||||
+ #include "usb-a9260.h"
|
||||
+ #endif
|
||||
#endif
|
||||
|
||||
#ifdef AT91SAM9XE
|
||||
--
|
||||
1.7.9.5
|
||||
|
|
@ -0,0 +1,97 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_ARCH_AT91SAM9260=y
|
||||
CONFIG_MACH_USB_A9260=y
|
||||
CONFIG_AT91_SLOW_CLOCK=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
CONFIG_IP_ADVANCED_ROUTER=y
|
||||
CONFIG_IP_ROUTE_VERBOSE=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
CONFIG_IP_PNP_RARP=y
|
||||
CONFIG_IP_MROUTE=y
|
||||
CONFIG_IP_PIMSM_V1=y
|
||||
CONFIG_IP_PIMSM_V2=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
# CONFIG_INET_LRO is not set
|
||||
# CONFIG_INET_DIAG is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_DATAFLASH=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ATMEL=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_MACB=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
CONFIG_INPUT_EVBUG=y
|
||||
# CONFIG_KEYBOARD_ATKBD is not set
|
||||
CONFIG_KEYBOARD_GPIO=y
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_ATMEL=y
|
||||
# CONFIG_HWMON is not set
|
||||
# CONFIG_USB_HID is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_ETH=m
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_FUSE_FS=m
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3_ACL=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_CODEPAGE_850=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_DEBUG_LL=y
|
|
@ -0,0 +1,851 @@
|
|||
From 74796655212d321f50ab89e8c5570245901f4cba Mon Sep 17 00:00:00 2001
|
||||
From: Gregory Hermant <gregory.hermant@calao-systems.com>
|
||||
Date: Thu, 5 Jul 2012 18:44:07 +0200
|
||||
Subject: [PATCH] Add support for the Calao-systems USB-A9263
|
||||
|
||||
|
||||
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
|
||||
---
|
||||
board/usb_a9263/dataflash/Makefile | 115 +++++++++++++
|
||||
board/usb_a9263/dataflash/usb-a9263.h | 97 +++++++++++
|
||||
board/usb_a9263/nandflash/Makefile | 117 ++++++++++++++
|
||||
board/usb_a9263/nandflash/usb-a9263.h | 116 +++++++++++++
|
||||
board/usb_a9263/usb_a9263.c | 285 +++++++++++++++++++++++++++++++++
|
||||
crt0_gnu.S | 7 +
|
||||
driver/dataflash.c | 6 +-
|
||||
include/part.h | 6 +-
|
||||
8 files changed, 745 insertions(+), 4 deletions(-)
|
||||
create mode 100644 board/usb_a9263/dataflash/Makefile
|
||||
create mode 100644 board/usb_a9263/dataflash/usb-a9263.h
|
||||
create mode 100644 board/usb_a9263/nandflash/Makefile
|
||||
create mode 100644 board/usb_a9263/nandflash/usb-a9263.h
|
||||
create mode 100644 board/usb_a9263/usb_a9263.c
|
||||
|
||||
diff --git a/board/usb_a9263/dataflash/Makefile b/board/usb_a9263/dataflash/Makefile
|
||||
new file mode 100644
|
||||
index 0000000..332685e
|
||||
--- /dev/null
|
||||
+++ b/board/usb_a9263/dataflash/Makefile
|
||||
@@ -0,0 +1,115 @@
|
||||
+# TODO: set this appropriately for your local toolchain
|
||||
+#SHELL=C:\CYGWIN_REP\dwn_071004\bin\BASH.exe
|
||||
+CROSS_COMPILE=arm-elf-
|
||||
+#CROSS_COMPILE = arm-softfloat-linux-gnu-
|
||||
+
|
||||
+TOOLCHAIN=gcc
|
||||
+
|
||||
+BOOTSTRAP_PATH=../../..
|
||||
+
|
||||
+# DataFlashBoot Configuration for USB-A9263
|
||||
+
|
||||
+# Target name (case sensitive!!!)
|
||||
+TARGET=AT91SAM9263
|
||||
+# Board name (case sensitive!!!)
|
||||
+BOARD=usb_a9263
|
||||
+# Link Address and Top_of_Memory
|
||||
+LINK_ADDR=0x300000
|
||||
+TOP_OF_MEMORY=0x314000
|
||||
+# Name of current directory
|
||||
+PROJECT=dataflash
|
||||
+
|
||||
+ifndef BOOT_NAME
|
||||
+BOOT_NAME=$(PROJECT)_$(BOARD)
|
||||
+endif
|
||||
+
|
||||
+INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
|
||||
+
|
||||
+ifeq ($(TOOLCHAIN), gcc)
|
||||
+
|
||||
+AS=$(CROSS_COMPILE)gcc
|
||||
+CC=$(CROSS_COMPILE)gcc
|
||||
+LD=$(CROSS_COMPILE)gcc
|
||||
+NM= $(CROSS_COMPILE)nm
|
||||
+SIZE=$(CROSS_COMPILE)size
|
||||
+OBJCOPY=$(CROSS_COMPILE)objcopy
|
||||
+OBJDUMP=$(CROSS_COMPILE)objdump
|
||||
+CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
|
||||
+ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
|
||||
+
|
||||
+# Linker flags.
|
||||
+# -Wl,...: tell GCC to pass this to linker.
|
||||
+# -Map: create map file
|
||||
+# --cref: add cross reference to map file
|
||||
+LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
|
||||
+LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
|
||||
+OBJS=crt0_gnu.o
|
||||
+
|
||||
+endif
|
||||
+
|
||||
+OBJS+=\
|
||||
+ $(BOARD).o \
|
||||
+ main.o \
|
||||
+ gpio.o \
|
||||
+ pmc.o \
|
||||
+ debug.o \
|
||||
+ sdramc.o \
|
||||
+ dataflash.o \
|
||||
+ _udivsi3.o \
|
||||
+ _umodsi3.o \
|
||||
+ div0.o \
|
||||
+ udiv.o \
|
||||
+ string.o
|
||||
+
|
||||
+rebuild: clean all
|
||||
+
|
||||
+all: $(BOOT_NAME)
|
||||
+
|
||||
+ifeq ($(TOOLCHAIN), gcc)
|
||||
+$(BOOT_NAME): $(OBJS)
|
||||
+ $(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
|
||||
+ $(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
|
||||
+endif
|
||||
+
|
||||
+
|
||||
+$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
|
||||
+
|
||||
+main.o: $(BOOTSTRAP_PATH)/main.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
|
||||
+
|
||||
+gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
|
||||
+
|
||||
+pmc.o: $(BOOTSTRAP_PATH)/driver/pmc.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
|
||||
+
|
||||
+debug.o: $(BOOTSTRAP_PATH)/driver/debug.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
|
||||
+
|
||||
+sdramc.o: $(BOOTSTRAP_PATH)/driver/sdramc.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
|
||||
+
|
||||
+dataflash.o: $(BOOTSTRAP_PATH)/driver/dataflash.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
|
||||
+
|
||||
+crt0_gnu.o: $(BOOTSTRAP_PATH)/crt0_gnu.S
|
||||
+ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
|
||||
+
|
||||
+div0.o: $(BOOTSTRAP_PATH)/lib/div0.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
|
||||
+
|
||||
+string.o: $(BOOTSTRAP_PATH)/lib/string.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
|
||||
+
|
||||
+udiv.o: $(BOOTSTRAP_PATH)/lib/udiv.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
|
||||
+
|
||||
+_udivsi3.o: $(BOOTSTRAP_PATH)/lib/_udivsi3.S
|
||||
+ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
|
||||
+
|
||||
+_umodsi3.o: $(BOOTSTRAP_PATH)/lib/_umodsi3.S
|
||||
+ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
|
||||
+
|
||||
+clean:
|
||||
+ rm -f *.o *.bin *.elf *.map
|
||||
diff --git a/board/usb_a9263/dataflash/usb-a9263.h b/board/usb_a9263/dataflash/usb-a9263.h
|
||||
new file mode 100644
|
||||
index 0000000..40a3af8
|
||||
--- /dev/null
|
||||
+++ b/board/usb_a9263/dataflash/usb-a9263.h
|
||||
@@ -0,0 +1,97 @@
|
||||
+/* ----------------------------------------------------------------------------
|
||||
+ * ATMEL Microcontroller Software Support - ROUSSET -
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * Copyright (c) 2006, Atmel Corporation
|
||||
+
|
||||
+ * All rights reserved.
|
||||
+ *
|
||||
+ * Redistribution and use in source and binary forms, with or without
|
||||
+ * modification, are permitted provided that the following conditions are met:
|
||||
+ *
|
||||
+ * - Redistributions of source code must retain the above copyright notice,
|
||||
+ * this list of conditions and the disclaimer below.
|
||||
+ *
|
||||
+ * Atmel's name may not be used to endorse or promote products derived from
|
||||
+ * this software without specific prior written permission.
|
||||
+ *
|
||||
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
||||
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||||
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * File Name : usb-a9263.h
|
||||
+ * Object :
|
||||
+ * Creation : GH Jun 28th 2012
|
||||
+ *-----------------------------------------------------------------------------
|
||||
+ */
|
||||
+#ifndef _USB_A9263_H
|
||||
+#define _USB_A9263_H
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* PMC Settings */
|
||||
+/* */
|
||||
+/* The main oscillator is enabled as soon as possible in the c_startup */
|
||||
+/* and MCK is switched on the main oscillator. */
|
||||
+/* PLL initialization is done later in the hw_init() function */
|
||||
+/* ******************************************************************* */
|
||||
+#define MASTER_CLOCK (180000000/2)
|
||||
+#define PLL_LOCK_TIMEOUT 1000000
|
||||
+
|
||||
+#define PLLA_SETTINGS 0x20593F06
|
||||
+#define PLLB_SETTINGS 0x10483F0E
|
||||
+
|
||||
+/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
|
||||
+#define MCKR_SETTINGS (AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
|
||||
+#define MCKR_CSS_SETTINGS (AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* DataFlash Settings */
|
||||
+/* */
|
||||
+/* ******************************************************************* */
|
||||
+#define AT91C_BASE_SPI AT91C_BASE_SPI0
|
||||
+#define AT91C_ID_SPI AT91C_ID_SPI0
|
||||
+
|
||||
+/* SPI CLOCK */
|
||||
+#define AT91C_SPI_CLK 8000000
|
||||
+/* AC characteristics */
|
||||
+/* DLYBS = tCSS= 250ns min and DLYBCT = tCSH = 250ns */
|
||||
+#define DATAFLASH_TCSS (0x1a << 16) /* 250ns min (tCSS) <=> 12/48000000 = 250ns */
|
||||
+#define DATAFLASH_TCHS (0x1 << 24) /* 250ns min (tCSH) <=> (64*1+SCBR)/(2*48000000) */
|
||||
+
|
||||
+#define DF_CS_SETTINGS (AT91C_SPI_NCPHA | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | ((MASTER_CLOCK / AT91C_SPI_CLK) << 8))
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* SDRAMC Settings */
|
||||
+/* */
|
||||
+/* ******************************************************************* */
|
||||
+#define AT91C_BASE_SDRAMC AT91C_BASE_SDRAMC0
|
||||
+#define AT91C_EBI_SDRAM AT91C_EBI0_SDRAM
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* BootStrap Settings */
|
||||
+/* */
|
||||
+/* ******************************************************************* */
|
||||
+#define AT91C_SPI_PCS_DATAFLASH AT91C_SPI_PCS0_DATAFLASH /* Boot on SPI NCS0 */
|
||||
+
|
||||
+#define IMG_ADDRESS 0x4000 /* Image Address in DataFlash */
|
||||
+#define IMG_SIZE 0x40000 /* Image Size in DataFlash */
|
||||
+
|
||||
+#define MACH_TYPE 0x6AE /* USB-A9263 */
|
||||
+#define JUMP_ADDR 0x23F00000 /* Final Jump Address */
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* Application Settings */
|
||||
+/* ******************************************************************* */
|
||||
+#define CFG_HW_INIT
|
||||
+#define CFG_SDRAM
|
||||
+#undef CFG_DEBUG
|
||||
+
|
||||
+#define CFG_DATAFLASH
|
||||
+
|
||||
+#endif /* _USB_A9263_H */
|
||||
diff --git a/board/usb_a9263/nandflash/Makefile b/board/usb_a9263/nandflash/Makefile
|
||||
new file mode 100644
|
||||
index 0000000..c453098
|
||||
--- /dev/null
|
||||
+++ b/board/usb_a9263/nandflash/Makefile
|
||||
@@ -0,0 +1,117 @@
|
||||
+# TODO: set this appropriately for your local toolchain
|
||||
+#SHELL=C:\CYGWIN_REP\dwn_071004\bin\BASH.exe
|
||||
+CROSS_COMPILE=arm-elf-
|
||||
+
|
||||
+TOOLCHAIN=gcc
|
||||
+
|
||||
+BOOTSTRAP_PATH=../../..
|
||||
+
|
||||
+# NandFlashBoot Configuration for USB-A9263
|
||||
+
|
||||
+# Target name (case sensitive!!!)
|
||||
+TARGET=AT91SAM9263
|
||||
+# Board name (case sensitive!!!)
|
||||
+BOARD=usb_a9263
|
||||
+# Link Address and Top_of_Memory
|
||||
+LINK_ADDR=0x300000
|
||||
+TOP_OF_MEMORY=0x314000
|
||||
+# Name of current directory
|
||||
+PROJECT=nandflash
|
||||
+
|
||||
+ifndef BOOT_NAME
|
||||
+BOOT_NAME=$(PROJECT)_$(BOARD)
|
||||
+endif
|
||||
+
|
||||
+INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
|
||||
+
|
||||
+ifeq ($(TOOLCHAIN), gcc)
|
||||
+
|
||||
+AS=$(CROSS_COMPILE)gcc
|
||||
+CC=$(CROSS_COMPILE)gcc
|
||||
+LD=$(CROSS_COMPILE)gcc
|
||||
+NM= $(CROSS_COMPILE)nm
|
||||
+SIZE=$(CROSS_COMPILE)size
|
||||
+OBJCOPY=$(CROSS_COMPILE)objcopy
|
||||
+OBJDUMP=$(CROSS_COMPILE)objdump
|
||||
+CCFLAGS=-g -mcpu=arm9 -O0 -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
|
||||
+ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
|
||||
+
|
||||
+# Linker flags.
|
||||
+# -Wl,...: tell GCC to pass this to linker.
|
||||
+# -Map: create map file
|
||||
+# --cref: add cross reference to map file
|
||||
+LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
|
||||
+LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
|
||||
+OBJS=crt0_gnu.o
|
||||
+
|
||||
+endif
|
||||
+
|
||||
+OBJS+=\
|
||||
+ $(BOARD).o \
|
||||
+ main.o \
|
||||
+ gpio.o \
|
||||
+ pmc.o \
|
||||
+ debug.o \
|
||||
+ sdramc.o \
|
||||
+ nandflash.o \
|
||||
+ _udivsi3.o \
|
||||
+ _umodsi3.o \
|
||||
+ div0.o \
|
||||
+ udiv.o \
|
||||
+ string.o
|
||||
+
|
||||
+rebuild: clean all
|
||||
+
|
||||
+all: $(BOOT_NAME)
|
||||
+
|
||||
+ifeq ($(TOOLCHAIN), gcc)
|
||||
+$(BOOT_NAME): $(OBJS)
|
||||
+ $(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
|
||||
+ $(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
|
||||
+endif
|
||||
+
|
||||
+
|
||||
+$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
|
||||
+
|
||||
+main.o: $(BOOTSTRAP_PATH)/main.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
|
||||
+
|
||||
+gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
|
||||
+
|
||||
+pmc.o: $(BOOTSTRAP_PATH)/driver/pmc.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
|
||||
+
|
||||
+debug.o: $(BOOTSTRAP_PATH)/driver/debug.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
|
||||
+
|
||||
+sdramc.o: $(BOOTSTRAP_PATH)/driver/sdramc.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
|
||||
+
|
||||
+dataflash.o: $(BOOTSTRAP_PATH)/driver/dataflash.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
|
||||
+
|
||||
+nandflash.o: $(BOOTSTRAP_PATH)/driver/nandflash.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
|
||||
+
|
||||
+crt0_gnu.o: $(BOOTSTRAP_PATH)/crt0_gnu.S
|
||||
+ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
|
||||
+
|
||||
+div0.o: $(BOOTSTRAP_PATH)/lib/div0.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
|
||||
+
|
||||
+string.o: $(BOOTSTRAP_PATH)/lib/string.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
|
||||
+
|
||||
+udiv.o: $(BOOTSTRAP_PATH)/lib/udiv.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
|
||||
+
|
||||
+_udivsi3.o: $(BOOTSTRAP_PATH)/lib/_udivsi3.S
|
||||
+ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
|
||||
+
|
||||
+_umodsi3.o: $(BOOTSTRAP_PATH)/lib/_umodsi3.S
|
||||
+ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
|
||||
+
|
||||
+clean:
|
||||
+ rm -f *.o *.bin *.elf *.map
|
||||
diff --git a/board/usb_a9263/nandflash/usb-a9263.h b/board/usb_a9263/nandflash/usb-a9263.h
|
||||
new file mode 100644
|
||||
index 0000000..24e2cf1
|
||||
--- /dev/null
|
||||
+++ b/board/usb_a9263/nandflash/usb-a9263.h
|
||||
@@ -0,0 +1,116 @@
|
||||
+/* ----------------------------------------------------------------------------
|
||||
+ * ATMEL Microcontroller Software Support - ROUSSET -
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * Copyright (c) 2006, Atmel Corporation
|
||||
+
|
||||
+ * All rights reserved.
|
||||
+ *
|
||||
+ * Redistribution and use in source and binary forms, with or without
|
||||
+ * modification, are permitted provided that the following conditions are met:
|
||||
+ *
|
||||
+ * - Redistributions of source code must retain the above copyright notice,
|
||||
+ * this list of conditions and the disclaimer below.
|
||||
+ *
|
||||
+ * Atmel's name may not be used to endorse or promote products derived from
|
||||
+ * this software without specific prior written permission.
|
||||
+ *
|
||||
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
||||
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||||
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * File Name : usb-a9263.h
|
||||
+ * Object :
|
||||
+ * Creation : GH Jun 28th 2012
|
||||
+ *-----------------------------------------------------------------------------
|
||||
+ */
|
||||
+#ifndef _USB_A9263_H
|
||||
+#define _USB_A9263_H
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* PMC Settings */
|
||||
+/* */
|
||||
+/* The main oscillator is enabled as soon as possible in the c_startup */
|
||||
+/* and MCK is switched on the main oscillator. */
|
||||
+/* PLL initialization is done later in the hw_init() function */
|
||||
+/* ******************************************************************* */
|
||||
+#define MASTER_CLOCK (180000000/2)
|
||||
+#define PLL_LOCK_TIMEOUT 1000000
|
||||
+
|
||||
+#define PLLA_SETTINGS 0x20593F06
|
||||
+#define PLLB_SETTINGS 0x10483F0E
|
||||
+
|
||||
+/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
|
||||
+#define MCKR_SETTINGS (AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
|
||||
+#define MCKR_CSS_SETTINGS (AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* NandFlash Settings */
|
||||
+/* */
|
||||
+/* ******************************************************************* */
|
||||
+#define AT91C_SMARTMEDIA_BASE 0x40000000
|
||||
+
|
||||
+#define AT91_SMART_MEDIA_ALE (1 << 21) /* our ALE is AD21 */
|
||||
+#define AT91_SMART_MEDIA_CLE (1 << 22) /* our CLE is AD22 */
|
||||
+
|
||||
+#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOD_SODR = AT91C_PIO_PD15;} while(0)
|
||||
+#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOD_CODR = AT91C_PIO_PD15;} while(0)
|
||||
+#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOA_PDSR & AT91C_PIO_PA22))
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* SDRAMC Settings */
|
||||
+/* */
|
||||
+/* ******************************************************************* */
|
||||
+#define AT91C_BASE_SDRAMC AT91C_BASE_SDRAMC0
|
||||
+#define AT91C_EBI_SDRAM AT91C_EBI0_SDRAM
|
||||
+
|
||||
+/* ******************************************************************** */
|
||||
+/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 90000000. */
|
||||
+/* Please refer to SMC section in AT91SAM9x datasheet to learn how */
|
||||
+/* to generate these values. */
|
||||
+/* ******************************************************************** */
|
||||
+#define AT91C_SM_NWE_SETUP (1 << 0)
|
||||
+#define AT91C_SM_NCS_WR_SETUP (0 << 8)
|
||||
+#define AT91C_SM_NRD_SETUP (1 << 16)
|
||||
+#define AT91C_SM_NCS_RD_SETUP (0 << 24)
|
||||
+
|
||||
+#define AT91C_SM_NWE_PULSE (3 << 0)
|
||||
+#define AT91C_SM_NCS_WR_PULSE (3 << 8)
|
||||
+#define AT91C_SM_NRD_PULSE (3 << 16)
|
||||
+#define AT91C_SM_NCS_RD_PULSE (3 << 24)
|
||||
+
|
||||
+#define AT91C_SM_NWE_CYCLE (5 << 0)
|
||||
+#define AT91C_SM_NRD_CYCLE (5 << 16)
|
||||
+
|
||||
+#define AT91C_SM_TDF (2 << 16)
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* BootStrap Settings */
|
||||
+/* */
|
||||
+/* ******************************************************************* */
|
||||
+#define IMG_ADDRESS 0x20000 /* Image Address in NandFlash */
|
||||
+#define IMG_SIZE 0x40000 /* Image Size in NandFlash */
|
||||
+
|
||||
+#define MACH_TYPE 0x6AE /* USB-A9263 */
|
||||
+#define JUMP_ADDR 0x23F00000 /* Final Jump Address */
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* Application Settings */
|
||||
+/* ******************************************************************* */
|
||||
+#undef CFG_DEBUG
|
||||
+#undef CFG_DATAFLASH
|
||||
+
|
||||
+#define CFG_NANDFLASH
|
||||
+#undef NANDFLASH_SMALL_BLOCKS /* NANDFLASH_LARGE_BLOCKS used instead */
|
||||
+
|
||||
+#define CFG_HW_INIT
|
||||
+#define CFG_SDRAM
|
||||
+
|
||||
+
|
||||
+#endif /* _USB_A9263_H */
|
||||
diff --git a/board/usb_a9263/usb_a9263.c b/board/usb_a9263/usb_a9263.c
|
||||
new file mode 100644
|
||||
index 0000000..5630f99
|
||||
--- /dev/null
|
||||
+++ b/board/usb_a9263/usb_a9263.c
|
||||
@@ -0,0 +1,285 @@
|
||||
+/* ----------------------------------------------------------------------------
|
||||
+ * ATMEL Microcontroller Software Support - ROUSSET -
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * Copyright (c) 2006, Atmel Corporation
|
||||
+
|
||||
+ * All rights reserved.
|
||||
+ *
|
||||
+ * Redistribution and use in source and binary forms, with or without
|
||||
+ * modification, are permitted provided that the following conditions are met:
|
||||
+ *
|
||||
+ * - Redistributions of source code must retain the above copyright notice,
|
||||
+ * this list of conditions and the disclaiimer below.
|
||||
+ *
|
||||
+ * Atmel's name may not be used to endorse or promote products derived from
|
||||
+ * this software without specific prior written permission.
|
||||
+ *
|
||||
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
||||
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||||
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * File Name : usb_a9263.c
|
||||
+ * Object :
|
||||
+ * Creation : GH Jun 28th 2012
|
||||
+ *-----------------------------------------------------------------------------
|
||||
+ */
|
||||
+#include "../../include/part.h"
|
||||
+#include "../../include/gpio.h"
|
||||
+#include "../../include/pmc.h"
|
||||
+#include "../../include/debug.h"
|
||||
+#include "../../include/sdramc.h"
|
||||
+#include "../../include/main.h"
|
||||
+#ifdef CFG_NANDFLASH
|
||||
+#include "../../include/nandflash.h"
|
||||
+#endif
|
||||
+#ifdef CFG_DATAFLASH
|
||||
+#include "../../include/dataflash.h"
|
||||
+#endif
|
||||
+
|
||||
+static inline unsigned int get_cp15(void)
|
||||
+{
|
||||
+ unsigned int value;
|
||||
+ __asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
|
||||
+ return value;
|
||||
+}
|
||||
+
|
||||
+static inline void set_cp15(unsigned int value)
|
||||
+{
|
||||
+ __asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
|
||||
+}
|
||||
+
|
||||
+
|
||||
+#ifdef CFG_HW_INIT
|
||||
+/*---------------------------------------------------------------------------- */
|
||||
+/* \fn hw_init */
|
||||
+/* \brief This function performs very low level HW initialization */
|
||||
+/* This function is invoked as soon as possible during the c_startup */
|
||||
+/* The bss segment must be initialized */
|
||||
+/*---------------------------------------------------------------------------- */
|
||||
+void hw_init(void)
|
||||
+{
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc hw_pio[] = {
|
||||
+#ifdef CFG_DEBUG
|
||||
+ {"RXD", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"TXD", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+#endif
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Disable watchdog */
|
||||
+ writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
|
||||
+
|
||||
+ /* At this stage the main oscillator is supposed to be enabled
|
||||
+ * PCK = MCK = MOSC */
|
||||
+
|
||||
+ /* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
|
||||
+ pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
|
||||
+
|
||||
+ /* PCK = PLLA = 2 * MCK */
|
||||
+ pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
|
||||
+ /* Switch MCK on PLLA output */
|
||||
+ pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
|
||||
+
|
||||
+
|
||||
+ /* Configure PLLB */
|
||||
+ pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
|
||||
+
|
||||
+ /* Configure the PIO controller to output PCK0 */
|
||||
+ pio_setup(hw_pio);
|
||||
+
|
||||
+ /* Configure the EBI0 Slave Slot Cycle to 64 */
|
||||
+ writel( (readl((AT91C_BASE_MATRIX + MATRIX_SCFG4)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG4));
|
||||
+
|
||||
+#ifdef CFG_DEBUG
|
||||
+ /* Enable Debug messages on the DBGU */
|
||||
+ dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
|
||||
+ dbg_print("Start AT91Bootstrap...\n\r");
|
||||
+#endif /* CFG_DEBUG */
|
||||
+
|
||||
+#ifdef CFG_SDRAM
|
||||
+ /* Initialize the matrix */
|
||||
+ /* VDDIOMSEL = 1 -> Memories are 3.3V powered */
|
||||
+ writel(readl(AT91C_BASE_CCFG + CCFG_EBI0CSA) | (1 << 16) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBI0CSA);
|
||||
+
|
||||
+ /* Configure SDRAM Controller */
|
||||
+ sdram_init( AT91C_SDRAMC_NC_9 |
|
||||
+ AT91C_SDRAMC_NR_13 |
|
||||
+ AT91C_SDRAMC_CAS_2 |
|
||||
+ AT91C_SDRAMC_NB_4_BANKS |
|
||||
+ AT91C_SDRAMC_DBW_32_BITS |
|
||||
+ AT91C_SDRAMC_TWR_2 |
|
||||
+ AT91C_SDRAMC_TRC_7 |
|
||||
+ AT91C_SDRAMC_TRP_2 |
|
||||
+ AT91C_SDRAMC_TRCD_2 |
|
||||
+ AT91C_SDRAMC_TRAS_5 |
|
||||
+ AT91C_SDRAMC_TXSR_8, /* Control Register */
|
||||
+ (MASTER_CLOCK * 7)/1000000, /* Refresh Timer Register */
|
||||
+ AT91C_SDRAMC_MD_SDRAM); /* SDRAM (no low power) */
|
||||
+#endif /* CFG_SDRAM */
|
||||
+}
|
||||
+#endif /* CFG_HW_INIT */
|
||||
+
|
||||
+
|
||||
+#ifdef CFG_SDRAM
|
||||
+//*----------------------------------------------------------------------------
|
||||
+//* \fn sdramc_hw_init
|
||||
+//* \brief This function performs SDRAMC HW initialization
|
||||
+//*----------------------------------------------------------------------------*/
|
||||
+void sdramc_hw_init(void)
|
||||
+{
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc sdramc_pio[] = {
|
||||
+ {"D16", AT91C_PIN_PD(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D17", AT91C_PIN_PD(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D18", AT91C_PIN_PD(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D19", AT91C_PIN_PD(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D20", AT91C_PIN_PD(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D21", AT91C_PIN_PD(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D22", AT91C_PIN_PD(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D23", AT91C_PIN_PD(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D24", AT91C_PIN_PD(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D25", AT91C_PIN_PD(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D26", AT91C_PIN_PD(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D27", AT91C_PIN_PD(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D28", AT91C_PIN_PD(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D29", AT91C_PIN_PD(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D30", AT91C_PIN_PD(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D31", AT91C_PIN_PD(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Configure the SDRAMC PIO controller */
|
||||
+ pio_setup(sdramc_pio);
|
||||
+}
|
||||
+#endif
|
||||
+
|
||||
+#ifdef CFG_DATAFLASH
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn df_recovery */
|
||||
+/* \brief This function erases DataFlash Page 0 if USER PB is pressed */
|
||||
+/* during boot sequence */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void df_recovery(AT91PS_DF pDf)
|
||||
+{
|
||||
+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc usrpb_pio[] = {
|
||||
+ {"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
|
||||
+ pio_setup(usrpb_pio);
|
||||
+
|
||||
+ /* If USER PB is pressed during Boot sequence */
|
||||
+ /* Erase NandFlash block 0*/
|
||||
+ if ( !pio_get_value(AT91C_PIN_PB(10)) )
|
||||
+ df_page_erase(pDf, 0);
|
||||
+#endif
|
||||
+}
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn df_hw_init */
|
||||
+/* \brief This function performs DataFlash HW initialization */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void df_hw_init(void)
|
||||
+{
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc df_pio[] = {
|
||||
+ {"MISO", AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_B},
|
||||
+ {"MOSI", AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_B},
|
||||
+ {"SPCK", AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_B},
|
||||
+ {"NPCS0", AT91C_PIN_PA(5), 0, PIO_DEFAULT, PIO_PERIPH_B},
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ pio_setup(df_pio);
|
||||
+}
|
||||
+#endif /* CFG_DATAFLASH */
|
||||
+
|
||||
+
|
||||
+#ifdef CFG_NANDFLASH
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn nand_recovery */
|
||||
+/* \brief This function erases NandFlash Block 0 if USER PB is pressed */
|
||||
+/* during boot sequence */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+static void nand_recovery(void)
|
||||
+{
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc usrpb_pio[] = {
|
||||
+ {"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
|
||||
+ pio_setup(usrpb_pio);
|
||||
+
|
||||
+ /* If USER PB is pressed during Boot sequence */
|
||||
+ /* Erase NandFlash block 0*/
|
||||
+ if (!pio_get_value(AT91C_PIN_PB(10)) )
|
||||
+ AT91F_NandEraseBlock0();
|
||||
+}
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn nandflash_hw_init */
|
||||
+/* \brief NandFlash HW init */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void nandflash_hw_init(void)
|
||||
+{
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc nand_pio[] = {
|
||||
+ {"RDY_BSY", AT91C_PIN_PA(22), 0, PIO_PULLUP, PIO_INPUT},
|
||||
+ {"NANDCS", AT91C_PIN_PD(15), 0, PIO_PULLUP, PIO_OUTPUT},
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
|
||||
+ writel(readl(AT91C_BASE_CCFG + CCFG_EBI0CSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBI0CSA);
|
||||
+
|
||||
+ /* Configure SMC CS3 */
|
||||
+ writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC0 + SMC_SETUP3);
|
||||
+ writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC0 + SMC_PULSE3);
|
||||
+ writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE) , AT91C_BASE_SMC0 + SMC_CYCLE3);
|
||||
+ writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE |
|
||||
+ AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF) , AT91C_BASE_SMC0 + SMC_CTRL3);
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ writel((1 << AT91C_ID_PIOA), PMC_PCER + AT91C_BASE_PMC);
|
||||
+ writel((1 << AT91C_ID_PIOCDE), PMC_PCER + AT91C_BASE_PMC);
|
||||
+
|
||||
+ pio_setup(nand_pio);
|
||||
+
|
||||
+ nand_recovery();
|
||||
+}
|
||||
+
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn nandflash_cfg_16bits_dbw_init */
|
||||
+/* \brief Configure SMC in 16 bits mode */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void nandflash_cfg_16bits_dbw_init(void)
|
||||
+{
|
||||
+ writel(readl(AT91C_BASE_SMC0 + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC0 + SMC_CTRL3);
|
||||
+}
|
||||
+
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn nandflash_cfg_8bits_dbw_init */
|
||||
+/* \brief Configure SMC in 8 bits mode */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void nandflash_cfg_8bits_dbw_init(void)
|
||||
+{
|
||||
+ writel((readl(AT91C_BASE_SMC0 + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC0 + SMC_CTRL3);
|
||||
+}
|
||||
+
|
||||
+#endif /* #ifdef CFG_NANDFLASH */
|
||||
+
|
||||
+
|
||||
diff --git a/crt0_gnu.S b/crt0_gnu.S
|
||||
index 042b617..002feef 100644
|
||||
--- a/crt0_gnu.S
|
||||
+++ b/crt0_gnu.S
|
||||
@@ -106,6 +106,13 @@ _relocate_to_sram:
|
||||
#endif /* CFG_NORFLASH */
|
||||
|
||||
_setup_clocks:
|
||||
+/* Test if main osc is bypassed */
|
||||
+ ldr r0,=AT91C_PMC_MOR
|
||||
+ ldr r1, [r0]
|
||||
+ ldr r2,=AT91C_CKGR_OSCBYPASS
|
||||
+ ands r1, r1, r2
|
||||
+ bne _init_data /* branch if OSCBYPASS=1 */
|
||||
+
|
||||
/* Test if main oscillator is enabled */
|
||||
ldr r0,=AT91C_PMC_SR
|
||||
ldr r1, [r0]
|
||||
diff --git a/driver/dataflash.c b/driver/dataflash.c
|
||||
index e28e49e..4de295a 100644
|
||||
--- a/driver/dataflash.c
|
||||
+++ b/driver/dataflash.c
|
||||
@@ -293,14 +293,14 @@ static int df_init (AT91PS_DF pDf)
|
||||
pDf->dfDescription.pages_size = 264;
|
||||
pDf->dfDescription.page_offset = 9;
|
||||
break;
|
||||
-
|
||||
+*/
|
||||
case AT45DB021B:
|
||||
pDf->dfDescription.pages_number = 1024;
|
||||
pDf->dfDescription.pages_size = 264;
|
||||
pDf->dfDescription.page_offset = 9;
|
||||
break;
|
||||
|
||||
- case AT45DB041B:
|
||||
+/* case AT45DB041B:
|
||||
pDf->dfDescription.pages_number = 2048;
|
||||
pDf->dfDescription.pages_size = 264;
|
||||
pDf->dfDescription.page_offset = 9;
|
||||
@@ -373,7 +373,7 @@ int load_df(unsigned int pcs, unsigned int img_addr, unsigned int img_size, unsi
|
||||
if (!df_init(pDf))
|
||||
return -1;
|
||||
|
||||
-#if defined(AT91SAM9260) || defined(AT91SAM9XE) || defined(AT91SAM9G20)
|
||||
+#if defined(AT91SAM9260) || defined(AT91SAM9263) || defined(AT91SAM9XE) || defined(AT91SAM9G20)
|
||||
/* Test if a button has been pressed or not */
|
||||
/* Erase Page 0 to avoid infinite loop */
|
||||
df_recovery(pDf);
|
||||
diff --git a/include/part.h b/include/part.h
|
||||
index ba5985a..a1863d0 100644
|
||||
--- a/include/part.h
|
||||
+++ b/include/part.h
|
||||
@@ -61,7 +61,11 @@
|
||||
|
||||
#ifdef AT91SAM9263
|
||||
#include "AT91SAM9263_inc.h"
|
||||
-#include "at91sam9263ek.h"
|
||||
+ #ifdef at91sam9263ek
|
||||
+ #include "at91sam9263ek.h"
|
||||
+ #elif usb_a9263
|
||||
+ #include "usb-a9263.h"
|
||||
+ #endif
|
||||
#endif
|
||||
|
||||
#ifdef AT91CAP9
|
||||
--
|
||||
1.5.6.3
|
||||
|
|
@ -0,0 +1,102 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_ARCH_AT91SAM9263=y
|
||||
CONFIG_MACH_USB_A9263=y
|
||||
CONFIG_AT91_SLOW_CLOCK=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
CONFIG_IP_ADVANCED_ROUTER=y
|
||||
CONFIG_IP_ROUTE_VERBOSE=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
CONFIG_IP_PNP_RARP=y
|
||||
CONFIG_IP_MROUTE=y
|
||||
CONFIG_IP_PIMSM_V1=y
|
||||
CONFIG_IP_PIMSM_V2=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
# CONFIG_INET_LRO is not set
|
||||
# CONFIG_INET_DIAG is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_DATAFLASH=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ATMEL=y
|
||||
CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_MACB=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
CONFIG_INPUT_EVBUG=y
|
||||
# CONFIG_KEYBOARD_ATKBD is not set
|
||||
CONFIG_KEYBOARD_GPIO=y
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_ATMEL=y
|
||||
# CONFIG_HWMON is not set
|
||||
# CONFIG_USB_HID is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_ETH=m
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_FUSE_FS=m
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_UBIFS_FS_XATTR=y
|
||||
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_NFS_V3_ACL=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_CODEPAGE_850=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_DEBUG_LL=y
|
|
@ -0,0 +1,610 @@
|
|||
From 8d84757d5170969e8bdfebc7951f43c5aa2b05fd Mon Sep 17 00:00:00 2001
|
||||
From: Gregory Hermant <gregory.hermant@calao-systems.com>
|
||||
Date: Fri, 6 Jul 2012 16:32:47 +0200
|
||||
Subject: [PATCH] Add support for the Calao-systems USB-A9G20-LPW
|
||||
|
||||
|
||||
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
|
||||
---
|
||||
board/usb_a9g20_lpw/nandflash/Makefile | 121 ++++++++++
|
||||
board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h | 112 +++++++++
|
||||
board/usb_a9g20_lpw/usb_a9g20_lpw.c | 303 +++++++++++++++++++++++++
|
||||
crt0_gnu.S | 7 +
|
||||
include/part.h | 6 +-
|
||||
5 files changed, 548 insertions(+), 1 deletions(-)
|
||||
create mode 100644 board/usb_a9g20_lpw/nandflash/Makefile
|
||||
create mode 100644 board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h
|
||||
create mode 100644 board/usb_a9g20_lpw/usb_a9g20_lpw.c
|
||||
|
||||
diff --git a/board/usb_a9g20_lpw/nandflash/Makefile b/board/usb_a9g20_lpw/nandflash/Makefile
|
||||
new file mode 100644
|
||||
index 0000000..8c9d99a
|
||||
--- /dev/null
|
||||
+++ b/board/usb_a9g20_lpw/nandflash/Makefile
|
||||
@@ -0,0 +1,121 @@
|
||||
+# TODO: set this appropriately for your local toolchain
|
||||
+ifndef ERASE_FCT
|
||||
+ERASE_FCT=rm -f
|
||||
+endif
|
||||
+ifndef CROSS_COMPILE
|
||||
+CROSS_COMPILE=arm-elf-
|
||||
+endif
|
||||
+
|
||||
+TOOLCHAIN=gcc
|
||||
+
|
||||
+BOOTSTRAP_PATH=../../..
|
||||
+
|
||||
+# NandFlashBoot Configuration for USB-A9G20-LPW
|
||||
+
|
||||
+# Target name (case sensitive!!!)
|
||||
+TARGET=AT91SAM9G20
|
||||
+# Board name (case sensitive!!!)
|
||||
+BOARD=usb_a9g20_lpw
|
||||
+# Link Address and Top_of_Memory
|
||||
+LINK_ADDR=0x200000
|
||||
+TOP_OF_MEMORY=0x301000
|
||||
+# Name of current directory
|
||||
+PROJECT=nandflash
|
||||
+
|
||||
+ifndef BOOT_NAME
|
||||
+BOOT_NAME=$(PROJECT)_$(BOARD)
|
||||
+endif
|
||||
+
|
||||
+INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
|
||||
+
|
||||
+ifeq ($(TOOLCHAIN), gcc)
|
||||
+
|
||||
+AS=$(CROSS_COMPILE)gcc
|
||||
+CC=$(CROSS_COMPILE)gcc
|
||||
+LD=$(CROSS_COMPILE)gcc
|
||||
+NM= $(CROSS_COMPILE)nm
|
||||
+SIZE=$(CROSS_COMPILE)size
|
||||
+OBJCOPY=$(CROSS_COMPILE)objcopy
|
||||
+OBJDUMP=$(CROSS_COMPILE)objdump
|
||||
+CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
|
||||
+ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
|
||||
+
|
||||
+# Linker flags.
|
||||
+# -Wl,...: tell GCC to pass this to linker.
|
||||
+# -Map: create map file
|
||||
+# --cref: add cross reference to map file
|
||||
+LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
|
||||
+LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
|
||||
+OBJS=crt0_gnu.o
|
||||
+
|
||||
+endif
|
||||
+
|
||||
+OBJS+=\
|
||||
+ $(BOARD).o \
|
||||
+ main.o \
|
||||
+ gpio.o \
|
||||
+ pmc.o \
|
||||
+ debug.o \
|
||||
+ sdramc.o \
|
||||
+ nandflash.o \
|
||||
+ _udivsi3.o \
|
||||
+ _umodsi3.o \
|
||||
+ div0.o \
|
||||
+ udiv.o \
|
||||
+ string.o
|
||||
+
|
||||
+rebuild: clean all
|
||||
+
|
||||
+all: $(BOOT_NAME)
|
||||
+
|
||||
+ifeq ($(TOOLCHAIN), gcc)
|
||||
+$(BOOT_NAME): $(OBJS)
|
||||
+ $(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
|
||||
+ $(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
|
||||
+endif
|
||||
+
|
||||
+
|
||||
+$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
|
||||
+
|
||||
+main.o: $(BOOTSTRAP_PATH)/main.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
|
||||
+
|
||||
+gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
|
||||
+
|
||||
+pmc.o: $(BOOTSTRAP_PATH)/driver/pmc.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
|
||||
+
|
||||
+debug.o: $(BOOTSTRAP_PATH)/driver/debug.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
|
||||
+
|
||||
+sdramc.o: $(BOOTSTRAP_PATH)/driver/sdramc.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
|
||||
+
|
||||
+dataflash.o: $(BOOTSTRAP_PATH)/driver/dataflash.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
|
||||
+
|
||||
+nandflash.o: $(BOOTSTRAP_PATH)/driver/nandflash.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
|
||||
+
|
||||
+crt0_gnu.o: $(BOOTSTRAP_PATH)/crt0_gnu.S
|
||||
+ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
|
||||
+
|
||||
+div0.o: $(BOOTSTRAP_PATH)/lib/div0.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
|
||||
+
|
||||
+string.o: $(BOOTSTRAP_PATH)/lib/string.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
|
||||
+
|
||||
+udiv.o: $(BOOTSTRAP_PATH)/lib/udiv.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
|
||||
+
|
||||
+_udivsi3.o: $(BOOTSTRAP_PATH)/lib/_udivsi3.S
|
||||
+ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
|
||||
+
|
||||
+_umodsi3.o: $(BOOTSTRAP_PATH)/lib/_umodsi3.S
|
||||
+ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
|
||||
+
|
||||
+clean:
|
||||
+ $(ERASE_FCT) *.o *.bin *.elf *.map
|
||||
diff --git a/board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h b/board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h
|
||||
new file mode 100644
|
||||
index 0000000..c0bdc6e
|
||||
--- /dev/null
|
||||
+++ b/board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h
|
||||
@@ -0,0 +1,112 @@
|
||||
+/* ----------------------------------------------------------------------------
|
||||
+ * ATMEL Microcontroller Software Support - ROUSSET -
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * Copyright (c) 2008, Atmel Corporation
|
||||
+
|
||||
+ * All rights reserved.
|
||||
+ *
|
||||
+ * Redistribution and use in source and binary forms, with or without
|
||||
+ * modification, are permitted provided that the following conditions are met:
|
||||
+ *
|
||||
+ * - Redistributions of source code must retain the above copyright notice,
|
||||
+ * this list of conditions and the disclaimer below.
|
||||
+ *
|
||||
+ * Atmel's name may not be used to endorse or promote products derived from
|
||||
+ * this software without specific prior written permission.
|
||||
+ *
|
||||
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
||||
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||||
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * File Name : usb-a9g20-lpw.h
|
||||
+ * Object :
|
||||
+ * Creation : GH July 6th 2012
|
||||
+ *-----------------------------------------------------------------------------
|
||||
+ */
|
||||
+#ifndef _USB_A9G20_LPW_H
|
||||
+#define _USB_A9G20_LPW_H
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* PMC Settings */
|
||||
+/* */
|
||||
+/* The main oscillator is enabled as soon as possible in the c_startup */
|
||||
+/* and MCK is switched on the main oscillator. */
|
||||
+/* PLL initialization is done later in the hw_init() function */
|
||||
+/* ******************************************************************* */
|
||||
+#define MASTER_CLOCK (133000000)
|
||||
+#define PLL_LOCK_TIMEOUT 1000000
|
||||
+
|
||||
+/* Set PLLA to 798Mhz */
|
||||
+#define PLLA_SETTINGS 0x20843F02
|
||||
+#define PLLB_SETTINGS 0x100F3F02
|
||||
+
|
||||
+/* Switch MCK on PLLA output PCK = PLLA/2 = 3 * MCK */
|
||||
+#define MCKR_SETTINGS 0x1300
|
||||
+#define MCKR_CSS_SETTINGS (AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* NandFlash Settings */
|
||||
+/* */
|
||||
+/* ******************************************************************* */
|
||||
+#define AT91C_SMARTMEDIA_BASE 0x40000000
|
||||
+
|
||||
+#define AT91_SMART_MEDIA_ALE (1 << 21) /* our ALE is AD21 */
|
||||
+#define AT91_SMART_MEDIA_CLE (1 << 22) /* our CLE is AD22 */
|
||||
+
|
||||
+#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
|
||||
+#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
|
||||
+
|
||||
+#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
|
||||
+
|
||||
+
|
||||
+/* ******************************************************************** */
|
||||
+/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 133000000.*/
|
||||
+/* Please refer to SMC section in AT91SAM9 datasheet to learn how */
|
||||
+/* to generate these values. */
|
||||
+/* ******************************************************************** */
|
||||
+#define AT91C_SM_NWE_SETUP (2 << 0)
|
||||
+#define AT91C_SM_NCS_WR_SETUP (0 << 8)
|
||||
+#define AT91C_SM_NRD_SETUP (2 << 16)
|
||||
+#define AT91C_SM_NCS_RD_SETUP (0 << 24)
|
||||
+
|
||||
+#define AT91C_SM_NWE_PULSE (4 << 0)
|
||||
+#define AT91C_SM_NCS_WR_PULSE (4 << 8)
|
||||
+#define AT91C_SM_NRD_PULSE (4 << 16)
|
||||
+#define AT91C_SM_NCS_RD_PULSE (4 << 24)
|
||||
+
|
||||
+#define AT91C_SM_NWE_CYCLE (7 << 0)
|
||||
+#define AT91C_SM_NRD_CYCLE (7 << 16)
|
||||
+
|
||||
+#define AT91C_SM_TDF (3 << 16)
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* BootStrap Settings */
|
||||
+/* */
|
||||
+/* ******************************************************************* */
|
||||
+#define IMG_ADDRESS 0x20000 /* Image Address in NandFlash */
|
||||
+#define IMG_SIZE 0x40000 /* Image Size in NandFlash */
|
||||
+
|
||||
+#define MACH_TYPE 0x731 /* USB-A9G20 */
|
||||
+#define JUMP_ADDR 0x23F00000 /* Final Jump Address */
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* Application Settings */
|
||||
+/* ******************************************************************* */
|
||||
+#undef CFG_DEBUG
|
||||
+#undef CFG_DATAFLASH
|
||||
+
|
||||
+#define CFG_NANDFLASH
|
||||
+#undef NANDFLASH_SMALL_BLOCKS /* NANDFLASH_LARGE_BLOCKS used instead */
|
||||
+#undef CFG_NANDFLASH_RECOVERY
|
||||
+
|
||||
+#define CFG_SDRAM
|
||||
+#define CFG_HW_INIT
|
||||
+
|
||||
+#endif /* _USB_A9G20_LPW_H */
|
||||
diff --git a/board/usb_a9g20_lpw/usb_a9g20_lpw.c b/board/usb_a9g20_lpw/usb_a9g20_lpw.c
|
||||
new file mode 100644
|
||||
index 0000000..c372307
|
||||
--- /dev/null
|
||||
+++ b/board/usb_a9g20_lpw/usb_a9g20_lpw.c
|
||||
@@ -0,0 +1,303 @@
|
||||
+/* ----------------------------------------------------------------------------
|
||||
+ * ATMEL Microcontroller Software Support - ROUSSET -
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * Copyright (c) 2008, Atmel Corporation
|
||||
+
|
||||
+ * All rights reserved.
|
||||
+ *
|
||||
+ * Redistribution and use in source and binary forms, with or without
|
||||
+ * modification, are permitted provided that the following conditions are met:
|
||||
+ *
|
||||
+ * - Redistributions of source code must retain the above copyright notice,
|
||||
+ * this list of conditions and the disclaimer below.
|
||||
+ *
|
||||
+ * Atmel's name may not be used to endorse or promote products derived from
|
||||
+ * this software without specific prior written permission.
|
||||
+ *
|
||||
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
||||
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||||
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * File Name : usb_a9g20_lpw.c
|
||||
+ * Object :
|
||||
+ * Creation : GH July 6th 2012
|
||||
+ *-----------------------------------------------------------------------------
|
||||
+ */
|
||||
+#include "../../include/part.h"
|
||||
+#include "../../include/gpio.h"
|
||||
+#include "../../include/pmc.h"
|
||||
+#include "../../include/debug.h"
|
||||
+#include "../../include/sdramc.h"
|
||||
+#include "../../include/main.h"
|
||||
+#ifdef CFG_NANDFLASH
|
||||
+#include "../../include/nandflash.h"
|
||||
+#endif
|
||||
+#ifdef CFG_DATAFLASH
|
||||
+#include "../../include/dataflash.h"
|
||||
+#endif
|
||||
+
|
||||
+static inline unsigned int get_cp15(void)
|
||||
+{
|
||||
+ unsigned int value;
|
||||
+ __asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
|
||||
+ return value;
|
||||
+}
|
||||
+
|
||||
+static inline void set_cp15(unsigned int value)
|
||||
+{
|
||||
+ __asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
|
||||
+}
|
||||
+
|
||||
+#ifdef CFG_HW_INIT
|
||||
+/*----------------------------------------------------------------------------*/
|
||||
+/* \fn hw_init */
|
||||
+/* \brief This function performs very low level HW initialization */
|
||||
+/* This function is invoked as soon as possible during the c_startup */
|
||||
+/* The bss segment must be initialized */
|
||||
+/*----------------------------------------------------------------------------*/
|
||||
+void hw_init(void)
|
||||
+{
|
||||
+ unsigned int cp15;
|
||||
+
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc hw_pio[] = {
|
||||
+#ifdef CFG_DEBUG
|
||||
+ {"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+#endif
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Disable watchdog */
|
||||
+ writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
|
||||
+
|
||||
+ /* At this stage the main oscillator is supposed to be enabled
|
||||
+ * PCK = MCK = MOSC */
|
||||
+ writel(0x00, AT91C_BASE_PMC + PMC_PLLICPR);
|
||||
+
|
||||
+ /* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
|
||||
+ pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
|
||||
+
|
||||
+ /* PCK = PLLA/2 = 3 * MCK */
|
||||
+ pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
|
||||
+ /* Switch MCK on PLLA output */
|
||||
+ pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
|
||||
+
|
||||
+ /* Configure PLLB */
|
||||
+ pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
|
||||
+
|
||||
+ /* Configure CP15 */
|
||||
+ cp15 = get_cp15();
|
||||
+ cp15 |= I_CACHE;
|
||||
+ set_cp15(cp15);
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ pio_setup(hw_pio);
|
||||
+
|
||||
+ /* Configure the EBI Slave Slot Cycle to 64 */
|
||||
+ writel((readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
|
||||
+
|
||||
+#ifdef CFG_DEBUG
|
||||
+ /* Enable Debug messages on the DBGU */
|
||||
+ dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
|
||||
+
|
||||
+ dbg_print("Start AT91Bootstrap...\n\r");
|
||||
+#endif /* CFG_DEBUG */
|
||||
+
|
||||
+#ifdef CFG_SDRAM
|
||||
+ /* Initialize the matrix (VDDIOSEL=0: memory voltage = 1.8V ) */
|
||||
+ writel((readl(AT91C_BASE_CCFG + CCFG_EBICSA) & ~0x00010000) | AT91C_EBI_CS1A_SDRAMC , AT91C_BASE_CCFG + CCFG_EBICSA);
|
||||
+
|
||||
+ /* Configure SDRAM Controller */
|
||||
+ sdram_init( AT91C_SDRAMC_NC_9 |
|
||||
+ AT91C_SDRAMC_NR_13 |
|
||||
+ AT91C_SDRAMC_CAS_3 |
|
||||
+ AT91C_SDRAMC_NB_4_BANKS |
|
||||
+ AT91C_SDRAMC_DBW_32_BITS |
|
||||
+ AT91C_SDRAMC_TWR_3 |
|
||||
+ AT91C_SDRAMC_TRC_9 |
|
||||
+ AT91C_SDRAMC_TRP_3 |
|
||||
+ AT91C_SDRAMC_TRCD_3 |
|
||||
+ AT91C_SDRAMC_TRAS_6 |
|
||||
+ AT91C_SDRAMC_TXSR_10, /* Control Register */
|
||||
+ (MASTER_CLOCK * 7)/1000000, /* Refresh Timer Register */
|
||||
+ AT91C_SDRAMC_MD_SDRAM); /* SDRAM (no low power) */
|
||||
+
|
||||
+#endif /* CFG_SDRAM */
|
||||
+}
|
||||
+#endif /* CFG_HW_INIT */
|
||||
+
|
||||
+#ifdef CFG_SDRAM
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn sdramc_hw_init */
|
||||
+/* \brief This function performs SDRAMC HW initialization */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void sdramc_hw_init(void)
|
||||
+{
|
||||
+ /* Configure PIOs */
|
||||
+/* const struct pio_desc sdramc_pio[] = {
|
||||
+ {"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+*/
|
||||
+ /* Configure the SDRAMC PIO controller to output PCK0 */
|
||||
+/* pio_setup(sdramc_pio); */
|
||||
+
|
||||
+ writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
|
||||
+ writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
|
||||
+
|
||||
+}
|
||||
+#endif /* CFG_SDRAM */
|
||||
+
|
||||
+#ifdef CFG_DATAFLASH
|
||||
+
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn df_recovery */
|
||||
+/* \brief This function erases DataFlash Page 0 if USR PB is pressed */
|
||||
+/* during boot sequence */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void df_recovery(AT91PS_DF pDf)
|
||||
+{
|
||||
+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS1_DATAFLASH)
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc usrpb[] = {
|
||||
+ {"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
|
||||
+ pio_setup(usrpb);
|
||||
+
|
||||
+ /* If USR PB is pressed during Boot sequence */
|
||||
+ /* Erase NandFlash block 0*/
|
||||
+ if ( !pio_get_value(AT91C_PIN_PB(10)) )
|
||||
+ df_page_erase(pDf, 0);
|
||||
+#endif
|
||||
+}
|
||||
+
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn df_hw_init */
|
||||
+/* \brief This function performs DataFlash HW initialization */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void df_hw_init(void)
|
||||
+{
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc df_pio[] = {
|
||||
+ {"MISO", AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"MOSI", AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"SPCK", AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
|
||||
+ {"NPCS0", AT91C_PIN_PA(3), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+#endif
|
||||
+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS1_DATAFLASH)
|
||||
+ {"NPCS1", AT91C_PIN_PC(11), 0, PIO_DEFAULT, PIO_PERIPH_B},
|
||||
+#endif
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ pio_setup(df_pio);
|
||||
+}
|
||||
+#endif /* CFG_DATAFLASH */
|
||||
+
|
||||
+
|
||||
+
|
||||
+#ifdef CFG_NANDFLASH
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn nand_recovery */
|
||||
+/* \brief This function erases NandFlash Block 0 if USER PB is pressed */
|
||||
+/* during boot sequence */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+#ifdef CFG_NANDFLASH_RECOVERY
|
||||
+static void nand_recovery(void)
|
||||
+{
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc usrpb[] = {
|
||||
+ {"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
|
||||
+ pio_setup(usrpb);
|
||||
+
|
||||
+ /* If USER PB is pressed during Boot sequence */
|
||||
+ /* Erase NandFlash block 0*/
|
||||
+ if (!pio_get_value(AT91C_PIN_PB(10)) )
|
||||
+ AT91F_NandEraseBlock0();
|
||||
+}
|
||||
+#else
|
||||
+static void nand_recovery(void) {}
|
||||
+#endif
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn nandflash_hw_init */
|
||||
+/* \brief NandFlash HW init */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void nandflash_hw_init(void)
|
||||
+{
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc nand_pio[] = {
|
||||
+ {"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
|
||||
+ {"NANDCS", AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
|
||||
+ writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
|
||||
+
|
||||
+ /* Configure SMC CS3 */
|
||||
+ writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
|
||||
+ writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
|
||||
+ writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE) , AT91C_BASE_SMC + SMC_CYCLE3);
|
||||
+ writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE |
|
||||
+ AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF) , AT91C_BASE_SMC + SMC_CTRL3);
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
|
||||
+ pio_setup(nand_pio);
|
||||
+
|
||||
+ nand_recovery();
|
||||
+}
|
||||
+
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn nandflash_cfg_16bits_dbw_init */
|
||||
+/* \brief Configure SMC in 16 bits mode */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void nandflash_cfg_16bits_dbw_init(void)
|
||||
+{
|
||||
+ writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
|
||||
+}
|
||||
+
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn nandflash_cfg_8bits_dbw_init */
|
||||
+/* \brief Configure SMC in 8 bits mode */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void nandflash_cfg_8bits_dbw_init(void)
|
||||
+{
|
||||
+ writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
|
||||
+}
|
||||
+
|
||||
+#endif /* #ifdef CFG_NANDFLASH */
|
||||
diff --git a/crt0_gnu.S b/crt0_gnu.S
|
||||
index 042b617..002feef 100644
|
||||
--- a/crt0_gnu.S
|
||||
+++ b/crt0_gnu.S
|
||||
@@ -106,6 +106,13 @@ _relocate_to_sram:
|
||||
#endif /* CFG_NORFLASH */
|
||||
|
||||
_setup_clocks:
|
||||
+/* Test if main osc is bypassed */
|
||||
+ ldr r0,=AT91C_PMC_MOR
|
||||
+ ldr r1, [r0]
|
||||
+ ldr r2,=AT91C_CKGR_OSCBYPASS
|
||||
+ ands r1, r1, r2
|
||||
+ bne _init_data /* branch if OSCBYPASS=1 */
|
||||
+
|
||||
/* Test if main oscillator is enabled */
|
||||
ldr r0,=AT91C_PMC_SR
|
||||
ldr r1, [r0]
|
||||
diff --git a/include/part.h b/include/part.h
|
||||
index ba5985a..1d7392a 100644
|
||||
--- a/include/part.h
|
||||
+++ b/include/part.h
|
||||
@@ -46,7 +46,11 @@
|
||||
|
||||
#ifdef AT91SAM9G20
|
||||
#include "AT91SAM9260_inc.h"
|
||||
-#include "at91sam9g20ek.h"
|
||||
+ #ifdef at91sam9g20ek
|
||||
+ #include "at91sam9g20ek.h"
|
||||
+ #elif usb_a9g20_lpw
|
||||
+ #include "usb-a9g20-lpw.h"
|
||||
+ #endif
|
||||
#endif
|
||||
|
||||
#ifdef AT91SAM9261
|
||||
--
|
||||
1.5.6.3
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
diff --git a/arch/arm/configs/usb_a9g20_defconfig b/arch/arm/configs/usb_a9g20_defconfig
|
||||
index 30bf380..7716e0e 100644
|
||||
--- a/arch/arm/configs/usb_a9g20_defconfig
|
||||
+++ b/arch/arm/configs/usb_a9g20_defconfig
|
||||
@@ -15,6 +15,7 @@ CONFIG_HUSH_FANCY_PROMPT=y
|
||||
CONFIG_CMDLINE_EDITING=y
|
||||
CONFIG_AUTO_COMPLETE=y
|
||||
CONFIG_MENU=y
|
||||
+# CONFIG_ERRNO_MESSAGES is not set
|
||||
# CONFIG_CONSOLE_ACTIVATE_FIRST is not set
|
||||
CONFIG_CONSOLE_ACTIVATE_ALL=y
|
||||
CONFIG_PARTITION=y
|
|
@ -0,0 +1,105 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_ARCH_AT91SAM9G20=y
|
||||
CONFIG_MACH_USB_A9G20=y
|
||||
CONFIG_AT91_SLOW_CLOCK=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
CONFIG_IP_ADVANCED_ROUTER=y
|
||||
CONFIG_IP_ROUTE_VERBOSE=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
CONFIG_IP_PNP_RARP=y
|
||||
CONFIG_IP_MROUTE=y
|
||||
CONFIG_IP_PIMSM_V1=y
|
||||
CONFIG_IP_PIMSM_V2=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
# CONFIG_INET_LRO is not set
|
||||
# CONFIG_INET_DIAG is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_DATAFLASH=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ATMEL=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_MACB=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
CONFIG_INPUT_EVBUG=y
|
||||
# CONFIG_KEYBOARD_ATKBD is not set
|
||||
CONFIG_KEYBOARD_GPIO=y
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_GPIO=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_ATMEL=y
|
||||
# CONFIG_HWMON is not set
|
||||
# CONFIG_USB_HID is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_ETH=m
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_RV3029C2=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_FUSE_FS=m
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_UBIFS_FS_XATTR=y
|
||||
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_NFS_V3_ACL=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_CODEPAGE_850=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_DEBUG_LL=y
|
|
@ -0,0 +1,42 @@
|
|||
*********************
|
||||
* MIPS Creator CI20 *
|
||||
*********************
|
||||
|
||||
The 'ci20_defconfig' will create a root filesystem and a kernel image
|
||||
under the 'output/images/' directory. This document will try to explain how
|
||||
to use them in order to run Buildroot in the MIPS Creator CI20 board.
|
||||
|
||||
Assuming you are at the U-Boot prompt of the MIPS Creator CI20, you have to
|
||||
load the generated kernel image by using the 'tftpboot' command. In
|
||||
order to do that, you will need to get the network working. Here you
|
||||
have the instructions to set the ip address, netmask and gateway:
|
||||
|
||||
setenv ipaddr x.x.x.x
|
||||
setenv netmask x.x.x.x
|
||||
setenv gatewayip x.x.x.x
|
||||
|
||||
Now you have to set the ip for the TFTP server you are going to load the
|
||||
kernel image from, and also the name of the kernel image file (we use
|
||||
'uImage' as a filename in this example):
|
||||
|
||||
setenv serverip x.x.x.x
|
||||
setenv bootfile uImage
|
||||
|
||||
And finally load the kernel image:
|
||||
|
||||
tftpboot
|
||||
|
||||
Now you have to extract the generated root filesystem into a USB drive
|
||||
or SD-Card. Here you have the instructions to boot from the two of them.
|
||||
You have to choose the one your prefer:
|
||||
|
||||
From USB
|
||||
setenv bootargs console=ttyS4,115200 console=tty0 mem=256M@0x0
|
||||
mem=768M@0x30000000 root=/dev/sda1
|
||||
|
||||
From SD-Card
|
||||
setenv bootargs console=ttyS4,115200 console=tty0 mem=256M@0x0
|
||||
mem=768M@0x30000000 root=/dev/mmcblk0p1
|
||||
|
||||
And finally run this command to boot the board:
|
||||
bootm
|
|
@ -0,0 +1,2 @@
|
|||
set bootargs console=ttymxc1,115200 root=/dev/mmcblk0p1 rootwait consoleblank=0
|
||||
${fs}load mmc ${disk}:1 10800000 /boot/uImage && bootm 10800000 ; echo "Error loading kernel image"
|
|
@ -0,0 +1,7 @@
|
|||
#!/bin/sh
|
||||
|
||||
TARGET_DIR=$1
|
||||
BOARD_DIR="$(dirname $0)"
|
||||
|
||||
mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "boot script" \
|
||||
-d $BOARD_DIR/6q_bootscript.txt $TARGET_DIR/6q_bootscript
|
|
@ -0,0 +1,36 @@
|
|||
This is the minimal buildroot support for the Congatec QMX6 Qseven CoM
|
||||
|
||||
conga-QMX6 is based on the freescale iMX6 SoC. For more information please
|
||||
have a look at http://www.congatec.com/products/qseven/conga-qmx6.html
|
||||
|
||||
The configuration is based on the currently latest kernel release from
|
||||
Congatec's git repository which is based on 3.0.35. The bootloader u-boot
|
||||
is preconfigured on the CPU module and does not need to be replaced.
|
||||
|
||||
To build the default configuration you only have to:
|
||||
|
||||
make qmx6_defconfig && make
|
||||
|
||||
You will need a microSD card of sufficient size and the first or only
|
||||
partition configured as Linux type.
|
||||
|
||||
To transfer the system to the card do:
|
||||
|
||||
$ sudo dd if=output/images/rootfs.ext2 of=/dev/sdX1
|
||||
|
||||
You can optionally extend the filesystem size to the whole partition:
|
||||
|
||||
$ sudo resize2fs /dev/sdX1
|
||||
|
||||
You can also update the card image without completely rewriting it:
|
||||
|
||||
$ sudo mount /dev/sdX1 /mnt
|
||||
$ sudo tar xf output/images/rootfs.tar -C /mnt
|
||||
$ sudo umount /mnt
|
||||
|
||||
Connect a terminal program to the rs232 connector marked "CONSOLE"
|
||||
with baudrate set to 115200, insert the microSD card into the socket
|
||||
on the CPU module and power the board to watch the system boot.
|
||||
|
||||
Booting from the SD card slot on the base board is currently not
|
||||
supported.
|
|
@ -0,0 +1,4 @@
|
|||
setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait panic=10 ${extra}
|
||||
fatload mmc 0 0x43000000 script.bin
|
||||
fatload mmc 0 0x48000000 uImage
|
||||
bootm 0x48000000
|
|
@ -0,0 +1,749 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_BSD_PROCESS_ACCT=y
|
||||
CONFIG_BSD_PROCESS_ACCT_V3=y
|
||||
CONFIG_TASKSTATS=y
|
||||
CONFIG_TASK_DELAY_ACCT=y
|
||||
CONFIG_TASK_XACCT=y
|
||||
CONFIG_TASK_IO_ACCOUNTING=y
|
||||
CONFIG_AUDIT=y
|
||||
CONFIG_IRQ_DOMAIN_DEBUG=y
|
||||
CONFIG_RCU_FAST_NO_HZ=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=19
|
||||
CONFIG_CGROUPS=y
|
||||
CONFIG_CGROUP_FREEZER=y
|
||||
CONFIG_CGROUP_DEVICE=y
|
||||
CONFIG_CPUSETS=y
|
||||
CONFIG_CGROUP_CPUACCT=y
|
||||
CONFIG_RESOURCE_COUNTERS=y
|
||||
CONFIG_CGROUP_MEM_RES_CTLR=y
|
||||
CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
|
||||
CONFIG_CGROUP_MEM_RES_CTLR_KMEM=y
|
||||
CONFIG_CGROUP_PERF=y
|
||||
CONFIG_CGROUP_SCHED=y
|
||||
CONFIG_CFS_BANDWIDTH=y
|
||||
CONFIG_RT_GROUP_SCHED=y
|
||||
CONFIG_BLK_CGROUP=y
|
||||
CONFIG_RELAY=y
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_KALLSYMS_ALL=y
|
||||
CONFIG_PERF_COUNTERS=y
|
||||
# CONFIG_COMPAT_BRK is not set
|
||||
CONFIG_JUMP_LABEL=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_FORCE_LOAD=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
CONFIG_MODVERSIONS=y
|
||||
CONFIG_MODULE_SRCVERSION_ALL=y
|
||||
CONFIG_BLK_DEV_BSGLIB=y
|
||||
CONFIG_BLK_DEV_INTEGRITY=y
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_OSF_PARTITION=y
|
||||
CONFIG_AMIGA_PARTITION=y
|
||||
CONFIG_MAC_PARTITION=y
|
||||
CONFIG_BSD_DISKLABEL=y
|
||||
CONFIG_MINIX_SUBPARTITION=y
|
||||
CONFIG_SOLARIS_X86_PARTITION=y
|
||||
CONFIG_UNIXWARE_DISKLABEL=y
|
||||
CONFIG_SGI_PARTITION=y
|
||||
CONFIG_SUN_PARTITION=y
|
||||
CONFIG_KARMA_PARTITION=y
|
||||
CONFIG_EFI_PARTITION=y
|
||||
CONFIG_CFQ_GROUP_IOSCHED=y
|
||||
CONFIG_ARCH_SUN7I=y
|
||||
CONFIG_SUNXI_SCALING_MIN=408
|
||||
# CONFIG_CACHE_L2X0 is not set
|
||||
CONFIG_NO_HZ=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_SMP=y
|
||||
CONFIG_ARM_ARCH_TIMER=y
|
||||
CONFIG_NR_CPUS=2
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_AEABI=y
|
||||
# CONFIG_OABI_COMPAT is not set
|
||||
CONFIG_HIGHMEM=y
|
||||
CONFIG_COMPACTION=y
|
||||
CONFIG_KSM=y
|
||||
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/mmc0p1 rw init=/init loglevel=8"
|
||||
CONFIG_KEXEC=y
|
||||
CONFIG_CPU_FREQ=y
|
||||
CONFIG_CPU_FREQ_STAT=m
|
||||
CONFIG_CPU_FREQ_DEFAULT_GOV_FANTASY=y
|
||||
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
||||
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
|
||||
CONFIG_CPU_FREQ_GOV_USERSPACE=m
|
||||
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
|
||||
CONFIG_CPU_FREQ_GOV_INTERACTIVE=y
|
||||
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
|
||||
CONFIG_CPU_FREQ_USR_EVNT_NOTIFY=y
|
||||
CONFIG_CPU_FREQ_DVFS=y
|
||||
CONFIG_CPU_IDLE=y
|
||||
CONFIG_VFP=y
|
||||
CONFIG_NEON=y
|
||||
CONFIG_BINFMT_MISC=y
|
||||
CONFIG_PM_RUNTIME=y
|
||||
CONFIG_PM_DEBUG=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_XFRM_USER=y
|
||||
CONFIG_NET_KEY=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
CONFIG_IP_ADVANCED_ROUTER=y
|
||||
CONFIG_IP_FIB_TRIE_STATS=y
|
||||
CONFIG_IP_MULTIPLE_TABLES=y
|
||||
CONFIG_IP_ROUTE_MULTIPATH=y
|
||||
CONFIG_IP_ROUTE_VERBOSE=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
CONFIG_IP_PNP_RARP=y
|
||||
CONFIG_NET_IPIP=y
|
||||
CONFIG_NET_IPGRE_DEMUX=m
|
||||
CONFIG_NET_IPGRE=m
|
||||
CONFIG_NET_IPGRE_BROADCAST=y
|
||||
CONFIG_IP_MROUTE=y
|
||||
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
|
||||
CONFIG_IP_PIMSM_V1=y
|
||||
CONFIG_IP_PIMSM_V2=y
|
||||
CONFIG_ARPD=y
|
||||
CONFIG_SYN_COOKIES=y
|
||||
CONFIG_INET_AH=y
|
||||
CONFIG_INET_ESP=y
|
||||
CONFIG_INET_IPCOMP=y
|
||||
CONFIG_INET_DIAG=m
|
||||
CONFIG_INET_UDP_DIAG=m
|
||||
CONFIG_TCP_CONG_ADVANCED=y
|
||||
CONFIG_TCP_CONG_BIC=y
|
||||
CONFIG_TCP_CONG_WESTWOOD=y
|
||||
CONFIG_TCP_CONG_HTCP=y
|
||||
CONFIG_TCP_CONG_HSTCP=y
|
||||
CONFIG_TCP_CONG_HYBLA=y
|
||||
CONFIG_TCP_CONG_SCALABLE=y
|
||||
CONFIG_TCP_CONG_LP=y
|
||||
CONFIG_TCP_CONG_VENO=y
|
||||
CONFIG_TCP_CONG_YEAH=y
|
||||
CONFIG_TCP_CONG_ILLINOIS=y
|
||||
CONFIG_TCP_MD5SIG=y
|
||||
CONFIG_IPV6=y
|
||||
CONFIG_IPV6_PRIVACY=y
|
||||
CONFIG_IPV6_ROUTER_PREF=y
|
||||
CONFIG_IPV6_ROUTE_INFO=y
|
||||
CONFIG_IPV6_OPTIMISTIC_DAD=y
|
||||
CONFIG_INET6_AH=m
|
||||
CONFIG_INET6_ESP=m
|
||||
CONFIG_INET6_IPCOMP=m
|
||||
CONFIG_IPV6_MIP6=m
|
||||
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
|
||||
CONFIG_INET6_XFRM_MODE_TUNNEL=m
|
||||
CONFIG_INET6_XFRM_MODE_BEET=m
|
||||
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
|
||||
CONFIG_IPV6_SIT=m
|
||||
CONFIG_IPV6_SIT_6RD=y
|
||||
CONFIG_IPV6_TUNNEL=m
|
||||
CONFIG_IPV6_MULTIPLE_TABLES=y
|
||||
CONFIG_IPV6_SUBTREES=y
|
||||
CONFIG_IPV6_MROUTE=y
|
||||
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
|
||||
CONFIG_IPV6_PIMSM_V2=y
|
||||
# CONFIG_ANDROID_PARANOID_NETWORK is not set
|
||||
CONFIG_NETWORK_SECMARK=y
|
||||
CONFIG_NETWORK_PHY_TIMESTAMPING=y
|
||||
CONFIG_NETFILTER=y
|
||||
CONFIG_NF_CONNTRACK=m
|
||||
CONFIG_NF_CONNTRACK_SECMARK=y
|
||||
CONFIG_NF_CONNTRACK_ZONES=y
|
||||
CONFIG_NF_CONNTRACK_EVENTS=y
|
||||
CONFIG_NF_CONNTRACK_TIMEOUT=y
|
||||
CONFIG_NF_CONNTRACK_TIMESTAMP=y
|
||||
CONFIG_NF_CT_PROTO_DCCP=m
|
||||
CONFIG_NF_CT_PROTO_SCTP=m
|
||||
CONFIG_NF_CT_PROTO_UDPLITE=m
|
||||
CONFIG_NF_CONNTRACK_AMANDA=m
|
||||
CONFIG_NF_CONNTRACK_FTP=m
|
||||
CONFIG_NF_CONNTRACK_H323=m
|
||||
CONFIG_NF_CONNTRACK_IRC=m
|
||||
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
|
||||
CONFIG_NF_CONNTRACK_SNMP=m
|
||||
CONFIG_NF_CONNTRACK_PPTP=m
|
||||
CONFIG_NF_CONNTRACK_SANE=m
|
||||
CONFIG_NF_CONNTRACK_SIP=m
|
||||
CONFIG_NF_CONNTRACK_TFTP=m
|
||||
CONFIG_NF_CT_NETLINK=m
|
||||
CONFIG_NF_CT_NETLINK_TIMEOUT=m
|
||||
CONFIG_NETFILTER_TPROXY=m
|
||||
CONFIG_NETFILTER_XT_SET=m
|
||||
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
|
||||
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
|
||||
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
|
||||
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
|
||||
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
|
||||
CONFIG_NETFILTER_XT_TARGET_CT=m
|
||||
CONFIG_NETFILTER_XT_TARGET_DSCP=m
|
||||
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
|
||||
CONFIG_NETFILTER_XT_TARGET_LED=m
|
||||
CONFIG_NETFILTER_XT_TARGET_LOG=m
|
||||
CONFIG_NETFILTER_XT_TARGET_MARK=m
|
||||
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
|
||||
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
|
||||
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
|
||||
CONFIG_NETFILTER_XT_TARGET_TEE=m
|
||||
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
|
||||
CONFIG_NETFILTER_XT_TARGET_TRACE=m
|
||||
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
|
||||
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
|
||||
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
|
||||
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
|
||||
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
|
||||
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
|
||||
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
|
||||
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
|
||||
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
|
||||
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
|
||||
CONFIG_NETFILTER_XT_MATCH_CPU=m
|
||||
CONFIG_NETFILTER_XT_MATCH_DCCP=m
|
||||
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
|
||||
CONFIG_NETFILTER_XT_MATCH_DSCP=m
|
||||
CONFIG_NETFILTER_XT_MATCH_ESP=m
|
||||
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
|
||||
CONFIG_NETFILTER_XT_MATCH_HELPER=m
|
||||
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
|
||||
CONFIG_NETFILTER_XT_MATCH_IPVS=m
|
||||
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
|
||||
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
|
||||
CONFIG_NETFILTER_XT_MATCH_MAC=m
|
||||
CONFIG_NETFILTER_XT_MATCH_MARK=m
|
||||
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
|
||||
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
|
||||
CONFIG_NETFILTER_XT_MATCH_OSF=m
|
||||
CONFIG_NETFILTER_XT_MATCH_OWNER=m
|
||||
CONFIG_NETFILTER_XT_MATCH_POLICY=m
|
||||
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
|
||||
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
|
||||
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
|
||||
CONFIG_NETFILTER_XT_MATCH_QUOTA2=m
|
||||
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
|
||||
CONFIG_NETFILTER_XT_MATCH_REALM=m
|
||||
CONFIG_NETFILTER_XT_MATCH_RECENT=m
|
||||
CONFIG_NETFILTER_XT_MATCH_SCTP=m
|
||||
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
|
||||
CONFIG_NETFILTER_XT_MATCH_STATE=m
|
||||
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
|
||||
CONFIG_NETFILTER_XT_MATCH_STRING=m
|
||||
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
|
||||
CONFIG_NETFILTER_XT_MATCH_TIME=m
|
||||
CONFIG_NETFILTER_XT_MATCH_U32=m
|
||||
CONFIG_IP_SET=m
|
||||
CONFIG_IP_SET_BITMAP_IP=m
|
||||
CONFIG_IP_SET_BITMAP_IPMAC=m
|
||||
CONFIG_IP_SET_BITMAP_PORT=m
|
||||
CONFIG_IP_SET_HASH_IP=m
|
||||
CONFIG_IP_SET_HASH_IPPORT=m
|
||||
CONFIG_IP_SET_HASH_IPPORTIP=m
|
||||
CONFIG_IP_SET_HASH_IPPORTNET=m
|
||||
CONFIG_IP_SET_HASH_NET=m
|
||||
CONFIG_IP_SET_HASH_NETPORT=m
|
||||
CONFIG_IP_SET_HASH_NETIFACE=m
|
||||
CONFIG_IP_SET_LIST_SET=m
|
||||
CONFIG_IP_VS=m
|
||||
CONFIG_IP_VS_IPV6=y
|
||||
CONFIG_IP_VS_PROTO_TCP=y
|
||||
CONFIG_IP_VS_PROTO_UDP=y
|
||||
CONFIG_IP_VS_PROTO_ESP=y
|
||||
CONFIG_IP_VS_PROTO_AH=y
|
||||
CONFIG_IP_VS_PROTO_SCTP=y
|
||||
CONFIG_IP_VS_RR=m
|
||||
CONFIG_IP_VS_WRR=m
|
||||
CONFIG_IP_VS_LC=m
|
||||
CONFIG_IP_VS_WLC=m
|
||||
CONFIG_IP_VS_LBLC=m
|
||||
CONFIG_IP_VS_LBLCR=m
|
||||
CONFIG_IP_VS_DH=m
|
||||
CONFIG_IP_VS_SH=m
|
||||
CONFIG_IP_VS_SED=m
|
||||
CONFIG_IP_VS_NQ=m
|
||||
CONFIG_IP_VS_FTP=m
|
||||
CONFIG_IP_VS_PE_SIP=m
|
||||
CONFIG_NF_CONNTRACK_IPV4=m
|
||||
CONFIG_IP_NF_QUEUE=m
|
||||
CONFIG_IP_NF_IPTABLES=m
|
||||
CONFIG_IP_NF_MATCH_AH=m
|
||||
CONFIG_IP_NF_MATCH_ECN=m
|
||||
CONFIG_IP_NF_MATCH_RPFILTER=m
|
||||
CONFIG_IP_NF_MATCH_TTL=m
|
||||
CONFIG_IP_NF_FILTER=m
|
||||
CONFIG_IP_NF_TARGET_REJECT=m
|
||||
CONFIG_IP_NF_TARGET_REJECT_SKERR=y
|
||||
CONFIG_IP_NF_TARGET_ULOG=m
|
||||
CONFIG_NF_NAT=m
|
||||
CONFIG_IP_NF_TARGET_MASQUERADE=m
|
||||
CONFIG_IP_NF_TARGET_NETMAP=m
|
||||
CONFIG_IP_NF_TARGET_REDIRECT=m
|
||||
CONFIG_IP_NF_MANGLE=m
|
||||
CONFIG_IP_NF_TARGET_CLUSTERIP=m
|
||||
CONFIG_IP_NF_TARGET_ECN=m
|
||||
CONFIG_IP_NF_TARGET_TTL=m
|
||||
CONFIG_IP_NF_RAW=m
|
||||
CONFIG_IP_NF_ARPTABLES=m
|
||||
CONFIG_IP_NF_ARPFILTER=m
|
||||
CONFIG_IP_NF_ARP_MANGLE=m
|
||||
CONFIG_NF_CONNTRACK_IPV6=m
|
||||
CONFIG_IP6_NF_QUEUE=m
|
||||
CONFIG_IP6_NF_IPTABLES=m
|
||||
CONFIG_IP6_NF_MATCH_AH=m
|
||||
CONFIG_IP6_NF_MATCH_EUI64=m
|
||||
CONFIG_IP6_NF_MATCH_FRAG=m
|
||||
CONFIG_IP6_NF_MATCH_OPTS=m
|
||||
CONFIG_IP6_NF_MATCH_HL=m
|
||||
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
|
||||
CONFIG_IP6_NF_MATCH_MH=m
|
||||
CONFIG_IP6_NF_MATCH_RPFILTER=m
|
||||
CONFIG_IP6_NF_MATCH_RT=m
|
||||
CONFIG_IP6_NF_TARGET_HL=m
|
||||
CONFIG_IP6_NF_FILTER=m
|
||||
CONFIG_IP6_NF_TARGET_REJECT=m
|
||||
CONFIG_IP6_NF_TARGET_REJECT_SKERR=y
|
||||
CONFIG_IP6_NF_MANGLE=m
|
||||
CONFIG_IP6_NF_RAW=m
|
||||
CONFIG_BRIDGE_NF_EBTABLES=m
|
||||
CONFIG_BRIDGE_EBT_BROUTE=m
|
||||
CONFIG_BRIDGE_EBT_T_FILTER=m
|
||||
CONFIG_BRIDGE_EBT_T_NAT=m
|
||||
CONFIG_BRIDGE_EBT_802_3=m
|
||||
CONFIG_BRIDGE_EBT_AMONG=m
|
||||
CONFIG_BRIDGE_EBT_ARP=m
|
||||
CONFIG_BRIDGE_EBT_IP=m
|
||||
CONFIG_BRIDGE_EBT_IP6=m
|
||||
CONFIG_BRIDGE_EBT_LIMIT=m
|
||||
CONFIG_BRIDGE_EBT_MARK=m
|
||||
CONFIG_BRIDGE_EBT_PKTTYPE=m
|
||||
CONFIG_BRIDGE_EBT_STP=m
|
||||
CONFIG_BRIDGE_EBT_VLAN=m
|
||||
CONFIG_BRIDGE_EBT_ARPREPLY=m
|
||||
CONFIG_BRIDGE_EBT_DNAT=m
|
||||
CONFIG_BRIDGE_EBT_MARK_T=m
|
||||
CONFIG_BRIDGE_EBT_REDIRECT=m
|
||||
CONFIG_BRIDGE_EBT_SNAT=m
|
||||
CONFIG_BRIDGE_EBT_LOG=m
|
||||
CONFIG_BRIDGE_EBT_ULOG=m
|
||||
CONFIG_BRIDGE_EBT_NFLOG=m
|
||||
CONFIG_L2TP=m
|
||||
CONFIG_L2TP_V3=y
|
||||
CONFIG_L2TP_IP=m
|
||||
CONFIG_L2TP_ETH=m
|
||||
CONFIG_BRIDGE=m
|
||||
CONFIG_VLAN_8021Q=m
|
||||
CONFIG_VLAN_8021Q_GVRP=y
|
||||
CONFIG_BATMAN_ADV=m
|
||||
CONFIG_OPENVSWITCH=m
|
||||
CONFIG_NETPRIO_CGROUP=m
|
||||
CONFIG_NET_PKTGEN=m
|
||||
CONFIG_IRDA=m
|
||||
CONFIG_IRLAN=m
|
||||
CONFIG_IRNET=m
|
||||
CONFIG_IRCOMM=m
|
||||
CONFIG_IRDA_ULTRA=y
|
||||
CONFIG_IRTTY_SIR=m
|
||||
CONFIG_KINGSUN_DONGLE=m
|
||||
CONFIG_KSDAZZLE_DONGLE=m
|
||||
CONFIG_KS959_DONGLE=m
|
||||
CONFIG_USB_IRDA=m
|
||||
CONFIG_SIGMATEL_FIR=m
|
||||
CONFIG_MCS_FIR=m
|
||||
CONFIG_BT=m
|
||||
CONFIG_BT_RFCOMM=m
|
||||
CONFIG_BT_RFCOMM_TTY=y
|
||||
CONFIG_BT_BNEP=m
|
||||
CONFIG_BT_BNEP_MC_FILTER=y
|
||||
CONFIG_BT_BNEP_PROTO_FILTER=y
|
||||
CONFIG_BT_HIDP=m
|
||||
CONFIG_BT_HCIBTUSB=m
|
||||
CONFIG_BT_HCIBTSDIO=m
|
||||
CONFIG_BT_HCIBCM203X=m
|
||||
CONFIG_BT_HCIBPA10X=m
|
||||
CONFIG_BT_HCIBFUSB=m
|
||||
CONFIG_BT_MRVL=m
|
||||
CONFIG_BT_MRVL_SDIO=m
|
||||
CONFIG_BT_ATH3K=m
|
||||
CONFIG_AF_RXRPC=m
|
||||
CONFIG_RXKAD=m
|
||||
CONFIG_CFG80211=y
|
||||
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
|
||||
CONFIG_WIRELESS_EXT_SYSFS=y
|
||||
CONFIG_LIB80211=m
|
||||
CONFIG_CFG80211_ALLOW_RECONNECT=y
|
||||
CONFIG_MAC80211=m
|
||||
CONFIG_MAC80211_MESH=y
|
||||
CONFIG_WIMAX=m
|
||||
CONFIG_RFKILL=y
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
# CONFIG_FIRMWARE_IN_KERNEL is not set
|
||||
CONFIG_CONNECTOR=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_CRYPTOLOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=2
|
||||
CONFIG_SUNXI_DBGREG=m
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_BLK_DEV_SR=y
|
||||
CONFIG_BLK_DEV_SR_VENDOR=y
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
CONFIG_ATA=y
|
||||
CONFIG_SATA_AHCI_PLATFORM=y
|
||||
CONFIG_SW_SATA_AHCI_PLATFORM=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_BONDING=m
|
||||
# CONFIG_NET_VENDOR_BROADCOM is not set
|
||||
# CONFIG_NET_VENDOR_CHELSIO is not set
|
||||
# CONFIG_NET_VENDOR_FARADAY is not set
|
||||
# CONFIG_NET_VENDOR_INTEL is not set
|
||||
# CONFIG_NET_VENDOR_MARVELL is not set
|
||||
# CONFIG_NET_VENDOR_MICREL is not set
|
||||
# CONFIG_NET_VENDOR_NATSEMI is not set
|
||||
# CONFIG_NET_VENDOR_SEEQ is not set
|
||||
# CONFIG_NET_VENDOR_SMSC is not set
|
||||
# CONFIG_NET_VENDOR_STMICRO is not set
|
||||
CONFIG_SUNXI_EMAC=y
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_PPP=m
|
||||
CONFIG_PPP_BSDCOMP=m
|
||||
CONFIG_PPP_DEFLATE=m
|
||||
CONFIG_PPP_FILTER=y
|
||||
CONFIG_PPP_MPPE=m
|
||||
CONFIG_PPP_MULTILINK=y
|
||||
CONFIG_PPPOE=m
|
||||
CONFIG_PPPOLAC=m
|
||||
CONFIG_PPPOPNS=m
|
||||
CONFIG_PPP_ASYNC=m
|
||||
CONFIG_PPP_SYNC_TTY=m
|
||||
CONFIG_USB_IPHETH=m
|
||||
CONFIG_ATH_COMMON=m
|
||||
CONFIG_ATH9K=m
|
||||
CONFIG_RTL8192CU=m
|
||||
CONFIG_RTL8192CU_SW=m
|
||||
CONFIG_RTL8188EU=m
|
||||
CONFIG_RTXX7X_SW=m
|
||||
CONFIG_INPUT_POLLDEV=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
CONFIG_INPUT_JOYDEV=y
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
CONFIG_INPUT_KEYRESET=y
|
||||
CONFIG_KEYBOARD_HV2605_KEYBOARD=m
|
||||
CONFIG_INPUT_JOYSTICK=y
|
||||
CONFIG_INPUT_TOUCHSCREEN=y
|
||||
CONFIG_TOUCHSCREEN_GT801=m
|
||||
CONFIG_TOUCHSCREEN_GT811=m
|
||||
CONFIG_TOUCHSCREEN_GT818=m
|
||||
CONFIG_TOUCHSCREEN_FT5X_TS=m
|
||||
CONFIG_TOUCHSCREEN_ZT8031=m
|
||||
CONFIG_GSENSOR=y
|
||||
CONFIG_SENSORS_BMA250=m
|
||||
CONFIG_MEMSIC_ECOMPASS=m
|
||||
CONFIG_SENSORS_MXC622X=m
|
||||
CONFIG_VT_HW_CONSOLE_BINDING=y
|
||||
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
CONFIG_SERIAL_NONSTANDARD=y
|
||||
# CONFIG_DEVKMEM is not set
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_SERIAL_8250_NR_UARTS=8
|
||||
CONFIG_SERIAL_8250_RUNTIME_UARTS=8
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_DEBUG=y
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_GPIO_SUNXI=m
|
||||
CONFIG_POWER_SUPPLY=y
|
||||
CONFIG_AW_AXP=y
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_REGULATOR=y
|
||||
CONFIG_MEDIA_SUPPORT=y
|
||||
CONFIG_VIDEO_DEV=y
|
||||
CONFIG_MEDIA_TUNER_CUSTOMISE=y
|
||||
# CONFIG_MEDIA_TUNER_SIMPLE is not set
|
||||
# CONFIG_MEDIA_TUNER_TDA8290 is not set
|
||||
# CONFIG_MEDIA_TUNER_TDA827X is not set
|
||||
# CONFIG_MEDIA_TUNER_TDA18271 is not set
|
||||
# CONFIG_MEDIA_TUNER_TDA9887 is not set
|
||||
# CONFIG_MEDIA_TUNER_TEA5767 is not set
|
||||
# CONFIG_MEDIA_TUNER_MT20XX is not set
|
||||
# CONFIG_MEDIA_TUNER_MT2060 is not set
|
||||
# CONFIG_MEDIA_TUNER_MT2266 is not set
|
||||
# CONFIG_MEDIA_TUNER_MT2131 is not set
|
||||
# CONFIG_MEDIA_TUNER_QT1010 is not set
|
||||
# CONFIG_MEDIA_TUNER_MXL5005S is not set
|
||||
# CONFIG_MEDIA_TUNER_MXL5007T is not set
|
||||
# CONFIG_MEDIA_TUNER_MC44S803 is not set
|
||||
# CONFIG_MEDIA_TUNER_MAX2165 is not set
|
||||
# CONFIG_MEDIA_TUNER_TDA18218 is not set
|
||||
# CONFIG_MEDIA_TUNER_TDA18212 is not set
|
||||
CONFIG_USB_VIDEO_CLASS=m
|
||||
CONFIG_USB_M5602=m
|
||||
CONFIG_USB_STV06XX=m
|
||||
CONFIG_USB_GL860=m
|
||||
CONFIG_USB_GSPCA_BENQ=m
|
||||
CONFIG_USB_GSPCA_CONEX=m
|
||||
CONFIG_USB_GSPCA_CPIA1=m
|
||||
CONFIG_USB_GSPCA_ETOMS=m
|
||||
CONFIG_USB_GSPCA_FINEPIX=m
|
||||
CONFIG_USB_GSPCA_JEILINJ=m
|
||||
CONFIG_USB_GSPCA_JL2005BCD=m
|
||||
CONFIG_USB_GSPCA_KINECT=m
|
||||
CONFIG_USB_GSPCA_KONICA=m
|
||||
CONFIG_USB_GSPCA_MARS=m
|
||||
CONFIG_USB_GSPCA_MR97310A=m
|
||||
CONFIG_USB_GSPCA_NW80X=m
|
||||
CONFIG_USB_GSPCA_OV519=m
|
||||
CONFIG_USB_GSPCA_OV534=m
|
||||
CONFIG_USB_GSPCA_OV534_9=m
|
||||
CONFIG_USB_GSPCA_PAC207=m
|
||||
CONFIG_USB_GSPCA_PAC7302=m
|
||||
CONFIG_USB_GSPCA_PAC7311=m
|
||||
CONFIG_USB_GSPCA_SE401=m
|
||||
CONFIG_USB_GSPCA_SN9C2028=m
|
||||
CONFIG_USB_GSPCA_SN9C20X=m
|
||||
CONFIG_USB_GSPCA_SONIXB=m
|
||||
CONFIG_USB_GSPCA_SONIXJ=m
|
||||
CONFIG_USB_GSPCA_SPCA500=m
|
||||
CONFIG_USB_GSPCA_SPCA501=m
|
||||
CONFIG_USB_GSPCA_SPCA505=m
|
||||
CONFIG_USB_GSPCA_SPCA506=m
|
||||
CONFIG_USB_GSPCA_SPCA508=m
|
||||
CONFIG_USB_GSPCA_SPCA561=m
|
||||
CONFIG_USB_GSPCA_SPCA1528=m
|
||||
CONFIG_USB_GSPCA_SQ905=m
|
||||
CONFIG_USB_GSPCA_SQ905C=m
|
||||
CONFIG_USB_GSPCA_SQ930X=m
|
||||
CONFIG_USB_GSPCA_STK014=m
|
||||
CONFIG_USB_GSPCA_STV0680=m
|
||||
CONFIG_USB_GSPCA_SUNPLUS=m
|
||||
CONFIG_USB_GSPCA_T613=m
|
||||
CONFIG_USB_GSPCA_TOPRO=m
|
||||
CONFIG_USB_GSPCA_TV8532=m
|
||||
CONFIG_USB_GSPCA_VC032X=m
|
||||
CONFIG_USB_GSPCA_VICAM=m
|
||||
CONFIG_USB_GSPCA_XIRLINK_CIT=m
|
||||
CONFIG_USB_GSPCA_ZC3XX=m
|
||||
CONFIG_VIDEO_PVRUSB2=m
|
||||
CONFIG_VIDEO_HDPVR=m
|
||||
CONFIG_VIDEO_EM28XX=m
|
||||
CONFIG_VIDEO_EM28XX_ALSA=m
|
||||
CONFIG_VIDEO_CX231XX=m
|
||||
CONFIG_VIDEO_CX231XX_ALSA=m
|
||||
CONFIG_VIDEO_TM6000=m
|
||||
CONFIG_VIDEO_TM6000_ALSA=m
|
||||
CONFIG_VIDEO_USBVISION=m
|
||||
CONFIG_USB_ET61X251=m
|
||||
CONFIG_USB_SN9C102=m
|
||||
CONFIG_USB_PWC=m
|
||||
CONFIG_VIDEO_CPIA2=m
|
||||
CONFIG_USB_ZR364XX=m
|
||||
CONFIG_USB_STKWEBCAM=m
|
||||
CONFIG_USB_S2255=m
|
||||
CONFIG_V4L_PLATFORM_DRIVERS=y
|
||||
CONFIG_SOC_CAMERA=m
|
||||
CONFIG_SOC_CAMERA_IMX074=m
|
||||
CONFIG_SOC_CAMERA_MT9M001=m
|
||||
CONFIG_SOC_CAMERA_MT9M111=m
|
||||
CONFIG_SOC_CAMERA_MT9T031=m
|
||||
CONFIG_SOC_CAMERA_MT9T112=m
|
||||
CONFIG_SOC_CAMERA_MT9V022=m
|
||||
CONFIG_SOC_CAMERA_RJ54N1=m
|
||||
CONFIG_SOC_CAMERA_TW9910=m
|
||||
CONFIG_SOC_CAMERA_PLATFORM=m
|
||||
CONFIG_SOC_CAMERA_OV2640=m
|
||||
CONFIG_SOC_CAMERA_OV5642=m
|
||||
CONFIG_SOC_CAMERA_OV6650=m
|
||||
CONFIG_SOC_CAMERA_OV772X=m
|
||||
CONFIG_SOC_CAMERA_OV9640=m
|
||||
CONFIG_SOC_CAMERA_OV9740=m
|
||||
CONFIG_V4L_MEM2MEM_DRIVERS=y
|
||||
# CONFIG_VIDEO_CSI_SUN4I is not set
|
||||
CONFIG_RADIO_SI470X=y
|
||||
CONFIG_USB_SI470X=m
|
||||
CONFIG_I2C_SI470X=m
|
||||
CONFIG_USB_MR800=m
|
||||
CONFIG_USB_DSBR=m
|
||||
CONFIG_RADIO_SI4713=m
|
||||
CONFIG_USB_KEENE=m
|
||||
CONFIG_RADIO_TEA5764=m
|
||||
CONFIG_RADIO_SAA7706H=m
|
||||
CONFIG_RADIO_TEF6862=m
|
||||
CONFIG_RADIO_WL1273=m
|
||||
CONFIG_AUDIO_ENGINE=y
|
||||
CONFIG_PA_CONTROL=y
|
||||
CONFIG_DRM=m
|
||||
CONFIG_DRM_MALI=m
|
||||
CONFIG_DRM_UDL=m
|
||||
CONFIG_MALI=m
|
||||
CONFIG_MALI400_DEBUG=y
|
||||
CONFIG_MALI400_GPU_UTILIZATION=y
|
||||
CONFIG_FB=y
|
||||
CONFIG_FB_SUNXI=y
|
||||
CONFIG_FB_SUNXI_LCD=y
|
||||
CONFIG_FB_SUNXI_HDMI=y
|
||||
CONFIG_HDMI_CEC=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_LOGO=y
|
||||
# CONFIG_LOGO_LINUX_MONO is not set
|
||||
# CONFIG_LOGO_LINUX_VGA16 is not set
|
||||
# CONFIG_LOGO_LINUX_CLUT224 is not set
|
||||
CONFIG_SOUND=y
|
||||
CONFIG_SND=y
|
||||
CONFIG_SND_SEQUENCER=m
|
||||
CONFIG_SND_MIXER_OSS=m
|
||||
CONFIG_SND_PCM_OSS=m
|
||||
CONFIG_SND_SEQUENCER_OSS=y
|
||||
CONFIG_SND_HRTIMER=m
|
||||
CONFIG_SND_VERBOSE_PRINTK=y
|
||||
CONFIG_SND_ALOOP=m
|
||||
CONFIG_SND_USB_AUDIO=m
|
||||
CONFIG_SND_SOC=y
|
||||
CONFIG_SND_SUNXI_SOC_SPDIF=y
|
||||
CONFIG_HIDRAW=y
|
||||
CONFIG_UHID=y
|
||||
CONFIG_HID_PID=y
|
||||
CONFIG_USB_HIDDEV=y
|
||||
CONFIG_HID_KYE=y
|
||||
CONFIG_HID_LOGITECH_DJ=y
|
||||
CONFIG_LOGITECH_FF=y
|
||||
# CONFIG_LOGIWHEELS_FF is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_EHCI_ROOT_HUB_TT=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_STORAGE_REALTEK=y
|
||||
CONFIG_USB_STORAGE_DATAFAB=y
|
||||
CONFIG_USB_STORAGE_FREECOM=y
|
||||
CONFIG_USB_STORAGE_ISD200=y
|
||||
CONFIG_USB_STORAGE_USBAT=y
|
||||
CONFIG_USB_STORAGE_SDDR09=y
|
||||
CONFIG_USB_STORAGE_SDDR55=y
|
||||
CONFIG_USB_STORAGE_JUMPSHOT=y
|
||||
CONFIG_USB_STORAGE_ALAUDA=y
|
||||
CONFIG_USB_STORAGE_ONETOUCH=y
|
||||
CONFIG_USB_STORAGE_KARMA=y
|
||||
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
|
||||
CONFIG_USB_STORAGE_ENE_UB6250=y
|
||||
CONFIG_USB_SERIAL=y
|
||||
CONFIG_USB_SERIAL_CONSOLE=y
|
||||
CONFIG_USB_SERIAL_GENERIC=y
|
||||
CONFIG_USB_SERIAL_FTDI_SIO=m
|
||||
CONFIG_USB_SERIAL_PL2303=m
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_FILE_STORAGE=m
|
||||
CONFIG_USB_FILE_STORAGE_TEST=y
|
||||
CONFIG_MMC=y
|
||||
# CONFIG_MMC_BLOCK_BOUNCE is not set
|
||||
CONFIG_MMC_USHC=y
|
||||
CONFIG_MMC_SUNXI_POWER_CONTROL=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_SUNXI=y
|
||||
CONFIG_LEDS_TRIGGER_TIMER=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
|
||||
CONFIG_LEDS_TRIGGER_CPU=y
|
||||
CONFIG_LEDS_TRIGGER_GPIO=y
|
||||
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_SUN4I=y
|
||||
CONFIG_STAGING=y
|
||||
CONFIG_ANDROID=y
|
||||
CONFIG_ANDROID_BINDER_IPC=y
|
||||
CONFIG_ANDROID_LOGGER=y
|
||||
CONFIG_ANDROID_RAM_CONSOLE=y
|
||||
CONFIG_ANDROID_LOW_MEMORY_KILLER=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT3_FS=y
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_EXT4_FS_POSIX_ACL=y
|
||||
CONFIG_EXT4_FS_SECURITY=y
|
||||
CONFIG_REISERFS_FS=y
|
||||
CONFIG_QUOTA=y
|
||||
CONFIG_QUOTA_NETLINK_INTERFACE=y
|
||||
# CONFIG_PRINT_QUOTA_WARNING is not set
|
||||
CONFIG_QFMT_V2=y
|
||||
CONFIG_AUTOFS4_FS=y
|
||||
CONFIG_FUSE_FS=y
|
||||
CONFIG_CUSE=y
|
||||
CONFIG_FSCACHE=y
|
||||
CONFIG_FSCACHE_STATS=y
|
||||
CONFIG_CACHEFILES=y
|
||||
CONFIG_ISO9660_FS=y
|
||||
CONFIG_JOLIET=y
|
||||
CONFIG_ZISOFS=y
|
||||
CONFIG_UDF_FS=y
|
||||
CONFIG_MSDOS_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
|
||||
CONFIG_NTFS_FS=y
|
||||
CONFIG_NTFS_RW=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_TMPFS_POSIX_ACL=y
|
||||
CONFIG_CONFIGFS_FS=y
|
||||
CONFIG_HFS_FS=y
|
||||
CONFIG_HFSPLUS_FS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_NFS_V3_ACL=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_NFS_V4_1=y
|
||||
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="y"
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NFS_USE_LEGACY_DNS=y
|
||||
CONFIG_NFSD=m
|
||||
CONFIG_NFSD_V3_ACL=y
|
||||
CONFIG_NFSD_V4=y
|
||||
CONFIG_NFSD_FAULT_INJECTION=y
|
||||
CONFIG_CIFS=y
|
||||
CONFIG_CIFS_DFS_UPCALL=y
|
||||
CONFIG_NLS_DEFAULT="utf8"
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_CODEPAGE_936=y
|
||||
CONFIG_NLS_CODEPAGE_950=y
|
||||
CONFIG_NLS_CODEPAGE_932=y
|
||||
CONFIG_NLS_CODEPAGE_949=y
|
||||
CONFIG_NLS_ASCII=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_PRINTK_TIME=y
|
||||
# CONFIG_ENABLE_WARN_DEPRECATED is not set
|
||||
CONFIG_FRAME_WARN=2048
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
CONFIG_STRIP_ASM_SYMS=y
|
||||
CONFIG_DEBUG_FS=y
|
||||
CONFIG_DEBUG_SECTION_MISMATCH=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_DEBUG_SHIRQ=y
|
||||
CONFIG_DETECT_HUNG_TASK=y
|
||||
CONFIG_SCHEDSTATS=y
|
||||
CONFIG_TIMER_STATS=y
|
||||
CONFIG_DEBUG_INFO=y
|
||||
CONFIG_DEBUG_LIST=y
|
||||
CONFIG_BOOT_PRINTK_DELAY=y
|
||||
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
|
||||
# CONFIG_FTRACE is not set
|
||||
CONFIG_DYNAMIC_DEBUG=y
|
||||
CONFIG_STRICT_DEVMEM=y
|
||||
CONFIG_DEBUG_LL=y
|
||||
CONFIG_SECURITYFS=y
|
||||
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
|
||||
CONFIG_CRYPTO_GF128MUL=y
|
||||
CONFIG_CRYPTO_SEQIV=y
|
||||
CONFIG_CRYPTO_SHA256=m
|
||||
CONFIG_CRYPTO_SHA512=m
|
||||
CONFIG_CRYPTO_AES=y
|
||||
CONFIG_CRYPTO_ZLIB=y
|
||||
CONFIG_CRYPTO_LZO=y
|
||||
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
||||
# CONFIG_CRYPTO_HW is not set
|
||||
CONFIG_LIBCRC32C=y
|
|
@ -0,0 +1,124 @@
|
|||
#! /bin/sh
|
||||
# mkCubieCard.sh v0.1:
|
||||
# 2013, Carlo Caione <carlo.caione@gmail.com>
|
||||
# heavely based on :
|
||||
# mkA10card.sh v0.1
|
||||
# 2012, Jason Plum <jplum@archlinuxarm.org>
|
||||
# loosely based on :
|
||||
# mkcard.sh v0.5
|
||||
# (c) Copyright 2009 Graeme Gregory <dp@xora.org.uk>
|
||||
# Licensed under terms of GPLv2
|
||||
#
|
||||
# Parts of the procudure base on the work of Denys Dmytriyenko
|
||||
# http://wiki.omap.com/index.php/MMC_Boot_Format
|
||||
|
||||
IMAGES_DIR=$1
|
||||
SPL_IMG=$IMAGES_DIR/sunxi-spl.bin
|
||||
SPL_UBOOT=$IMAGES_DIR/u-boot-sunxi-with-spl.bin
|
||||
UBOOT_IMG=$IMAGES_DIR/u-boot.bin
|
||||
UIMAGE=$IMAGES_DIR/uImage
|
||||
BIN_BOARD_FILE=$IMAGES_DIR/script.bin
|
||||
ROOTFS=$IMAGES_DIR/rootfs.tar
|
||||
BOOT_CMD_H=$IMAGES_DIR/boot.scr
|
||||
|
||||
export LC_ALL=C
|
||||
|
||||
if [ $# -ne 2 ]; then
|
||||
echo "Usage: $0 <images_dir> <drive>"
|
||||
exit 1;
|
||||
fi
|
||||
|
||||
if [ `id -u` -ne 0 ]; then
|
||||
echo "This script must be run as root" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ ! -f $SPL_IMG -a ! -f $SPL_UBOOT ] ||
|
||||
[ ! -f $UBOOT_IMG ] ||
|
||||
[ ! -f $UIMAGE ] ||
|
||||
[ ! -f $BIN_BOARD_FILE ] ||
|
||||
[ ! -f $ROOTFS ] ||
|
||||
[ ! -f $BOOT_CMD_H ]; then
|
||||
echo "File(s) missing."
|
||||
exit 1
|
||||
fi
|
||||
|
||||
DRIVE=$2
|
||||
P1=`mktemp -d`
|
||||
P2=`mktemp -d`
|
||||
|
||||
dd if=/dev/zero of=$DRIVE bs=1M count=3
|
||||
|
||||
SIZE=`fdisk -l $DRIVE | grep Disk | grep bytes | awk '{print $5}'`
|
||||
|
||||
echo DISK SIZE - $SIZE bytes
|
||||
|
||||
|
||||
# ~2048, 16MB, FAT, bootable
|
||||
# ~rest of drive, Ext4
|
||||
{
|
||||
echo 32,512,0x0C,*
|
||||
echo 544,,,-
|
||||
} | sfdisk -D $DRIVE
|
||||
|
||||
sleep 1
|
||||
|
||||
if [ -b ${DRIVE}1 ]; then
|
||||
D1=${DRIVE}1
|
||||
umount ${DRIVE}1
|
||||
mkfs.vfat -n "boot" ${DRIVE}1
|
||||
else
|
||||
if [ -b ${DRIVE}p1 ]; then
|
||||
D1=${DRIVE}p1
|
||||
umount ${DRIVE}p1
|
||||
mkfs.vfat -n "boot" ${DRIVE}p1
|
||||
else
|
||||
echo "Cant find boot partition in /dev"
|
||||
exit 1
|
||||
fi
|
||||
fi
|
||||
|
||||
|
||||
if [ -b ${DRIVE}2 ]; then
|
||||
D2=${DRIVE}2
|
||||
umount ${DRIVE}2
|
||||
mkfs.ext4 -L "Cubie" ${DRIVE}2
|
||||
else
|
||||
if [ -b ${DRIVE}p2 ]; then
|
||||
D2=${DRIVE}p2
|
||||
umount ${DRIVE}p2
|
||||
mkfs.ext4 -L "Cubie" ${DRIVE}p2
|
||||
else
|
||||
echo "Cant find rootfs partition in /dev"
|
||||
exit 1
|
||||
fi
|
||||
fi
|
||||
|
||||
mount $D1 $P1
|
||||
mount $D2 $P2
|
||||
|
||||
# write uImage
|
||||
cp $UIMAGE $P1
|
||||
# write board file
|
||||
cp $BIN_BOARD_FILE $P1
|
||||
# write u-boot script
|
||||
cp $BOOT_CMD_H $P1
|
||||
# write rootfs
|
||||
tar -C $P2 -xvf $ROOTFS
|
||||
|
||||
sync
|
||||
|
||||
umount $D1
|
||||
umount $D2
|
||||
|
||||
rm -fr $P1
|
||||
rm -fr $P2
|
||||
|
||||
if [ -e $SPL_UBOOT ]; then
|
||||
dd if=$SPL_UBOOT of=$DRIVE bs=1024 seek=8
|
||||
else
|
||||
# write SPL
|
||||
dd if=$SPL_IMG of=$DRIVE bs=1024 seek=8
|
||||
# write mele u-boot
|
||||
dd if=$UBOOT_IMG of=$DRIVE bs=1024 seek=32
|
||||
fi
|
|
@ -0,0 +1,14 @@
|
|||
#!/bin/sh
|
||||
# post-build.sh for CubieBoard
|
||||
# 2013, Carlo Caione <carlo.caione@gmail.com>
|
||||
|
||||
BOARD_DIR="$(dirname $0)"
|
||||
MKIMAGE=$HOST_DIR/usr/bin/mkimage
|
||||
BOOT_CMD=$BOARD_DIR/boot.cmd
|
||||
BOOT_CMD_H=$BINARIES_DIR/boot.scr
|
||||
|
||||
# U-Boot script
|
||||
if [ -e $MKIMAGE -a -e $BOOT_CMD ];
|
||||
then
|
||||
$MKIMAGE -C none -A arm -T script -d $BOOT_CMD $BOOT_CMD_H
|
||||
fi
|
|
@ -0,0 +1,62 @@
|
|||
cubieboard and cubieboard2
|
||||
|
||||
-----
|
||||
Intro
|
||||
-----
|
||||
|
||||
To be able to use your cubieboard board with the images generated by
|
||||
Buildroot you have to correctly setup the SD card.
|
||||
|
||||
For more information, please see http://linux-sunxi.org/FirstSteps
|
||||
|
||||
---------------
|
||||
How to build it
|
||||
---------------
|
||||
|
||||
You need to use the cubieboard_defconfig or cubieboard2_defconfig, to do so:
|
||||
* make cubieboard_defconfig
|
||||
or
|
||||
* make cubieboard2_defconfig
|
||||
|
||||
And to compile:
|
||||
* make
|
||||
|
||||
-----------------
|
||||
What is generated
|
||||
-----------------
|
||||
|
||||
After building, you should obtain this tree:
|
||||
|
||||
output/images/
|
||||
+-- rootfs.tar
|
||||
+-- boot.scr
|
||||
+-- script.bin
|
||||
+-- sunxi-spl.bin
|
||||
+-- u-boot.bin
|
||||
+-- u-boot-sunxi-with-spl.bin (optional)
|
||||
`-- uImage
|
||||
|
||||
--------------------------
|
||||
How setting up the SD card
|
||||
--------------------------
|
||||
|
||||
Depending on the rootfs size, you might want to use a 2GB or larger SD-card.
|
||||
The script mkcubiecard.sh will take care of partitioning and formatting
|
||||
the SD-card.
|
||||
|
||||
BEWARE! This process will erase your SD card.
|
||||
|
||||
Use dmesg to find out where the SD card is attached in the /dev tree
|
||||
(<device>) and then:
|
||||
|
||||
# sudo ./mkcubiecard.sh <images_dir> <device>
|
||||
|
||||
where:
|
||||
- <images_dir> is the directory containing the generated files (usually
|
||||
output/images)
|
||||
- <device> is the device file of the SD card (usually /dev/sdX)
|
||||
|
||||
|
||||
|
||||
--
|
||||
Carlo Caione <carlo.caione@gmail.com>
|
|
@ -0,0 +1 @@
|
|||
../imx6sabresd/create-boot-sd.sh
|
|
@ -0,0 +1,93 @@
|
|||
#!/bin/sh
|
||||
|
||||
set -u
|
||||
set -e
|
||||
|
||||
PROGNAME=$(basename $0)
|
||||
|
||||
usage()
|
||||
{
|
||||
echo "Create an SD card that boots on an i.MX53/6 board."
|
||||
echo
|
||||
echo "Note: all data on the the card will be completely deleted!"
|
||||
echo "Use with care!"
|
||||
echo "Superuser permissions may be required to write to the device."
|
||||
echo
|
||||
echo "Usage: ${PROGNAME} <sd_block_device>"
|
||||
echo "Arguments:"
|
||||
echo " <sd_block_device> The device to be written to"
|
||||
echo
|
||||
echo "Example: ${PROGNAME} /dev/mmcblk0"
|
||||
echo
|
||||
}
|
||||
|
||||
if [ $# -ne 1 ]; then
|
||||
usage
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ $(id -u) -ne 0 ]; then
|
||||
echo "${PROGNAME} must be run as root"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
DEV=${1}
|
||||
|
||||
# The partition name prefix depends on the device name:
|
||||
# - /dev/sde -> /dev/sde1
|
||||
# - /dev/mmcblk0 -> /dev/mmcblk0p1
|
||||
if echo ${DEV}|grep -q mmcblk ; then
|
||||
PART="p"
|
||||
else
|
||||
PART=""
|
||||
fi
|
||||
|
||||
PART1=${DEV}${PART}1
|
||||
PART2=${DEV}${PART}2
|
||||
|
||||
# Unmount the partitions if mounted
|
||||
umount ${PART1} || true
|
||||
umount ${PART2} || true
|
||||
|
||||
# First, clear the card
|
||||
dd if=/dev/zero of=${DEV} bs=1M count=20
|
||||
|
||||
sync
|
||||
|
||||
# Partition the card.
|
||||
# SD layout for i.MX6 boot:
|
||||
# - Bootloader at offset 1024
|
||||
# - FAT partition starting at 1MB offset, containing uImage and *.dtb
|
||||
# - ext2/3 partition formatted as ext2 or ext3, containing the root filesystem.
|
||||
sfdisk ${DEV} <<EOF
|
||||
32,480,b
|
||||
512,,L
|
||||
EOF
|
||||
|
||||
sync
|
||||
|
||||
# Copy the bootloader at offset 1024
|
||||
dd if=output/images/u-boot.imx of=${DEV} obs=512 seek=2
|
||||
|
||||
# Prepare a temp dir for mounting partitions
|
||||
TMPDIR=$(mktemp -d)
|
||||
|
||||
# FAT partition: kernel and DTBs
|
||||
mkfs.vfat ${PART1}
|
||||
mount ${PART1} ${TMPDIR}
|
||||
cp output/images/*Image ${TMPDIR}/
|
||||
cp output/images/*.dtb ${TMPDIR}/ || true
|
||||
sync
|
||||
umount ${TMPDIR}
|
||||
|
||||
# ext2 partition: root filesystem
|
||||
mkfs.ext2 ${PART2}
|
||||
mount ${PART2} ${TMPDIR}
|
||||
tar -C ${TMPDIR}/ -xf output/images/rootfs.tar
|
||||
sync
|
||||
umount ${TMPDIR}
|
||||
|
||||
# Cleanup
|
||||
rmdir ${TMPDIR}
|
||||
sync
|
||||
echo Done
|
|
@ -0,0 +1,36 @@
|
|||
From 4a7cd7c5b165317dccf45cfc235da3e14bc339e8 Mon Sep 17 00:00:00 2001
|
||||
From: =?UTF-8?q?Vincent=20Stehl=C3=A9?= <vincent.stehle@freescale.com>
|
||||
Date: Tue, 12 Aug 2014 10:17:31 +0200
|
||||
Subject: [PATCH] mx6qsabre_common: boot Linux to /init in mfgtools mode
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
||||
Buildroot supplies a nice /init wrapper script to use when booting from a
|
||||
ramdisk.
|
||||
|
||||
This patch tells u-boot to tell the kernel to boot into /init (instead of
|
||||
/linuxrc) on i.MX6, when booting in mfgtools mode. This way we can boot a
|
||||
buildroot system entirely through USB.
|
||||
|
||||
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
|
||||
---
|
||||
include/configs/mx6qsabre_common.h | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h
|
||||
index 69ff0df..ec7b665 100644
|
||||
--- a/include/configs/mx6qsabre_common.h
|
||||
+++ b/include/configs/mx6qsabre_common.h
|
||||
@@ -129,7 +129,7 @@
|
||||
|
||||
#define CONFIG_MFG_ENV_SETTINGS \
|
||||
"mfgtool_args=setenv bootargs console=" CONFIG_CONSOLE_DEV ",115200 " \
|
||||
- "rdinit=/linuxrc " \
|
||||
+ "rdinit=/init " \
|
||||
"g_mass_storage.stall=0 g_mass_storage.removable=1 " \
|
||||
"g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
|
||||
"g_mass_storage.iSerialNumber=\"\" "\
|
||||
--
|
||||
2.0.1
|
||||
|
|
@ -0,0 +1,67 @@
|
|||
*******************************************************
|
||||
Freescale i.MX6Q and i.MX6DL SABRESD development boards
|
||||
*******************************************************
|
||||
|
||||
This file documents the Buildroot support for the Freescale SABRE Board for
|
||||
Smart Devices Based on the i.MX 6 Series (SABRESD).
|
||||
|
||||
Read the SABRESD Quick Start Guide for an introduction to the board:
|
||||
http://cache.freescale.com/files/32bit/doc/quick_start_guide/SABRESDB_IMX6_QSG.pdf
|
||||
|
||||
Build
|
||||
=====
|
||||
|
||||
First, configure Buildroot for your SABRESD board.
|
||||
For i.MX6Q:
|
||||
|
||||
make freescale_imx6qsabresd_defconfig
|
||||
|
||||
For i.MX6DL:
|
||||
|
||||
make freescale_imx6dlsabresd_defconfig
|
||||
|
||||
Build all components:
|
||||
|
||||
make
|
||||
|
||||
You will find in ./output/images/ the following files:
|
||||
- imx6dl-sabresd.dtb or imx6q-sabresd.dtb
|
||||
- rootfs.ext2
|
||||
- rootfs.tar
|
||||
- u-boot.imx
|
||||
- uImage
|
||||
|
||||
Create a bootable SD card
|
||||
=========================
|
||||
|
||||
To determine the device associated to the SD card have a look in the
|
||||
/proc/partitions file:
|
||||
|
||||
cat /proc/partitions
|
||||
|
||||
Run the following script as root on your SD card. This will partition the card
|
||||
and copy the bootloader, kernel, DTBs and root filesystem as needed.
|
||||
|
||||
*** WARNING! The script will destroy all the card content. Use with care! ***
|
||||
|
||||
./board/freescale/imx6sabresd/create-boot-sd.sh <your-sd-device>
|
||||
|
||||
Boot the SABRESD board
|
||||
======================
|
||||
|
||||
To boot your newly created system (refer to the SABRESD Quick Start Guide for
|
||||
guidance):
|
||||
- insert the SD card in the SD3 slot of the board;
|
||||
- locate the BOOT dip switches (SW6), set dips 2 and 7 to ON, all others to OFF;
|
||||
- connect a Micro USB cable to Debug Port and connect using a terminal emulator
|
||||
at 115200 bps, 8n1;
|
||||
- power on the board.
|
||||
|
||||
Enjoy!
|
||||
|
||||
References
|
||||
==========
|
||||
|
||||
https://community.freescale.com/docs/DOC-95015
|
||||
https://community.freescale.com/docs/DOC-95017
|
||||
https://community.freescale.com/docs/DOC-99218
|
|
@ -0,0 +1,94 @@
|
|||
CONFIG_SYSVIPC=y
|
||||
CONFIG_NO_HZ=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_EXPERT=y
|
||||
# CONFIG_KALLSYMS is not set
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
# CONFIG_PPC_CHRP is not set
|
||||
# CONFIG_PPC_PMAC is not set
|
||||
CONFIG_PPC_83xx=y
|
||||
CONFIG_MPC831x_RDB=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
CONFIG_SYN_COOKIES=y
|
||||
# CONFIG_INET_LRO is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
# CONFIG_FW_LOADER is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
CONFIG_MTD_PHYSMAP_OF=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_FSL_ELBC=y
|
||||
CONFIG_PROC_DEVICETREE=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=32768
|
||||
CONFIG_CHR_DEV_SG=y
|
||||
CONFIG_SCSI_SPI_ATTRS=y
|
||||
CONFIG_ATA=y
|
||||
CONFIG_SATA_FSL=y
|
||||
CONFIG_MD=y
|
||||
CONFIG_BLK_DEV_MD=y
|
||||
CONFIG_MD_LINEAR=y
|
||||
CONFIG_MD_RAID0=y
|
||||
CONFIG_MD_RAID1=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_GIANFAR=y
|
||||
CONFIG_E100=y
|
||||
# CONFIG_INPUT_MOUSEDEV is not set
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_VT is not set
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_MPC=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_BITBANG=y
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_VIDEO_OUTPUT_CONTROL=m
|
||||
# CONFIG_USB_HID is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_EHCI_FSL=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
|
||||
CONFIG_USB_UHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_ETH=m
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
|
||||
CONFIG_RTC_DRV_DS1307=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT3_FS=y
|
||||
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
|
||||
CONFIG_PROC_KCORE=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_DETECT_HUNG_TASK=y
|
||||
CONFIG_CRYPTO_PCBC=m
|
||||
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
|
@ -0,0 +1,62 @@
|
|||
|
||||
******************** WARNING ********************
|
||||
The compiled U-Boot binary is intended for NAND flash only!
|
||||
It won't work for NOR and will brick that bootloader!
|
||||
|
||||
Also don't go playing around with different U-boot versions or flash targets
|
||||
unless you've got the necessary hardware and/or know-how to unbrick your kit.
|
||||
|
||||
2014.01 is known good for NAND.
|
||||
******************** WARNING ********************
|
||||
|
||||
You'll need to program the files created by buildroot into the flash.
|
||||
The fast way is to tftp transfer the files via one of the network interfaces.
|
||||
|
||||
Alternatively you can transfer the files via serial console with an Ymodem
|
||||
file transfer from your terminal program by using a "loady" command
|
||||
from the u-boot prompt instead of the "tftp ..." commands stated below.
|
||||
Beware that serial console file transfers are quite slow!
|
||||
|
||||
Remember to set the MPC8315ERDB switches to NAND boot if you want to use
|
||||
your newly built U-Boot.
|
||||
|
||||
1. Program the new U-Boot binary to NAND flash (optional)
|
||||
If you don't feel confident upgrading your bootloader then don't do it,
|
||||
it's unnecessary most of the time.
|
||||
|
||||
=> tftp $loadaddr u-boot-nand.bin
|
||||
=> nand erase 0 0x80000
|
||||
=> nand write $loadaddr 0 0x80000 $filesize
|
||||
|
||||
2. Program the kernel to NAND flash
|
||||
|
||||
=> tftp $loadaddr uImage
|
||||
=> nand erase 0x100000 0x1e0000
|
||||
=> nand write $loadaddr 0x100000 0x1e0000
|
||||
|
||||
3. Program the DTB to NAND flash
|
||||
|
||||
=> tftp $loadaddr mpc8315erdb.dtb
|
||||
=> nand erase 0x2e0000 0x20000
|
||||
=> nand write $loadaddr 0x2e0000 0x20000
|
||||
|
||||
4. Program the root filesystem to NAND flash
|
||||
|
||||
=> tftp $loadaddr rootfs.jffs2
|
||||
=> nand erase 0x400000 0x1c00000
|
||||
=> nand write $loadaddr 0x400000 $filesize
|
||||
|
||||
5. Booting your new system
|
||||
|
||||
=> setenv nandboot 'setenv bootargs root=/dev/mtdblock3 rootfstype=jffs2 console=$consoledev,$baudrate;nand read $fdtaddr 0x2e0000 0x20000;nand read $loadaddr 0x100000 0x1e0000;bootm $loadaddr - $fdtaddr'
|
||||
|
||||
If you want to set this boot option as default:
|
||||
|
||||
=> setenv bootcmd 'run nandboot'
|
||||
=> saveenv
|
||||
|
||||
...or for a single boot:
|
||||
|
||||
=> run nandboot
|
||||
|
||||
You can login with user "root".
|
|
@ -0,0 +1,129 @@
|
|||
CONFIG_PPC_85xx=y
|
||||
CONFIG_PHYS_64BIT=y
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_POSIX_MQUEUE=y
|
||||
CONFIG_AUDIT=y
|
||||
CONFIG_IRQ_DOMAIN_DEBUG=y
|
||||
CONFIG_NO_HZ=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_BSD_PROCESS_ACCT=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_EXPERT=y
|
||||
CONFIG_KALLSYMS_ALL=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
CONFIG_MODULE_FORCE_UNLOAD=y
|
||||
CONFIG_MODVERSIONS=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
CONFIG_P1010_RDB=y
|
||||
CONFIG_HIGHMEM=y
|
||||
CONFIG_SWIOTLB=y
|
||||
CONFIG_FORCE_MAX_ZONEORDER=12
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCI_MSI=y
|
||||
CONFIG_RAPIDIO=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_XFRM_USER=y
|
||||
CONFIG_NET_KEY=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
CONFIG_IP_ADVANCED_ROUTER=y
|
||||
CONFIG_IP_MULTIPLE_TABLES=y
|
||||
CONFIG_IP_ROUTE_MULTIPATH=y
|
||||
CONFIG_IP_ROUTE_VERBOSE=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
CONFIG_IP_PNP_RARP=y
|
||||
CONFIG_NET_IPIP=y
|
||||
CONFIG_IP_MROUTE=y
|
||||
CONFIG_IP_PIMSM_V1=y
|
||||
CONFIG_IP_PIMSM_V2=y
|
||||
CONFIG_INET_ESP=y
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
CONFIG_IPV6=y
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_FTL=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_CFI_INTELEXT=y
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
CONFIG_MTD_PHYSMAP_OF=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_FSL_ELBC=y
|
||||
CONFIG_MTD_NAND_FSL_IFC=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_NBD=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=131072
|
||||
CONFIG_EEPROM_LEGACY=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_CHR_DEV_ST=y
|
||||
CONFIG_BLK_DEV_SR=y
|
||||
CONFIG_CHR_DEV_SG=y
|
||||
CONFIG_SCSI_LOGGING=y
|
||||
CONFIG_ATA=y
|
||||
CONFIG_SATA_FSL=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_DUMMY=y
|
||||
CONFIG_GIANFAR=y
|
||||
CONFIG_VITESSE_PHY=y
|
||||
CONFIG_FIXED_PHY=y
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_SERIAL_8250_NR_UARTS=2
|
||||
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
|
||||
CONFIG_SERIAL_8250_MANY_PORTS=y
|
||||
CONFIG_SERIAL_8250_DETECT_IRQ=y
|
||||
CONFIG_SERIAL_8250_RSA=y
|
||||
CONFIG_NVRAM=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_MPC=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_FSL_SPI=y
|
||||
CONFIG_SPI_FSL_ESPI=y
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_EHCI_FSL=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
CONFIG_MMC_SDHCI_OF_ESDHC=y
|
||||
CONFIG_EDAC=y
|
||||
CONFIG_EDAC_MM_EDAC=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_CMOS=y
|
||||
CONFIG_DMADEVICES=y
|
||||
CONFIG_FSL_DMA=y
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_MSDOS_FS=m
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_PROC_KCORE=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_SQUASHFS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NFSD=y
|
||||
CONFIG_CRC_T10DIF=y
|
||||
CONFIG_DEBUG_INFO=y
|
||||
CONFIG_DEBUG_FS=y
|
||||
CONFIG_DETECT_HUNG_TASK=y
|
||||
CONFIG_CRYPTO_PCBC=m
|
||||
CONFIG_CRYPTO_SHA256=y
|
||||
CONFIG_CRYPTO_SHA512=y
|
||||
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM=y
|
|
@ -0,0 +1,77 @@
|
|||
|
||||
******************** WARNING ********************
|
||||
The compiled U-Boot binary is intended for NOR flash only!
|
||||
It won't work for NAND or SPI and will brick those bootloaders!
|
||||
|
||||
Also don't go playing around with different U-boot versions or flash targets
|
||||
unless you've got the necessary hardware and/or know-how to unbrick your kit.
|
||||
|
||||
2014.01 is known good for NOR on the P1010RDB-PA kit.
|
||||
|
||||
Freescale released a revised version of the kit with a faster processor and
|
||||
some other hardware changes named P1010RDB-PB. U-Boot needs to be configured
|
||||
differently for this kit hence this default config WILL NOT WORK.
|
||||
This is ONLY related to U-Boot, otherwise the configuration is the same,
|
||||
you can perfectly use the generated kernel and rootfs.
|
||||
|
||||
IF you want to build an U-Boot for the new kit just change
|
||||
BR2_TARGET_UBOOT_BOARDNAME from P1010RDB-PA_NOR to P1010RDB-PB_NOR.
|
||||
!!!!! THIS IS COMPLETELY UNTESTED BY BR DEVS SO YOU ARE ON YOUR OWN !!!!!
|
||||
If it works we'd like to know so drop an email to the mailing list. Thanks.
|
||||
|
||||
If your kit doesn't mention PA nor PB in their shipping inventory then it's
|
||||
the old version (PA).
|
||||
******************** WARNING ********************
|
||||
|
||||
You'll need to program the files created by buildroot into the flash.
|
||||
The fast way is to tftp transfer the files via one of the network interfaces.
|
||||
|
||||
Alternatively you can transfer the files via serial console with an Ymodem
|
||||
file transfer from your terminal program by using a "loady" command
|
||||
from the u-boot prompt instead of the "tftp ..." commands stated below.
|
||||
Beware that serial console file transfers are quite slow!
|
||||
|
||||
Remember to set the P1010RDB switches to NOR boot if you want to use
|
||||
your newly built U-Boot.
|
||||
|
||||
1. Program the new U-Boot binary to NOR flash (optional)
|
||||
If you don't feel confident upgrading your bootloader then don't do it,
|
||||
it's unnecessary most of the time.
|
||||
|
||||
=> tftp $loadaddr u-boot.bin
|
||||
=> protect off 0xeff80000 +$filesize
|
||||
=> erase 0xeff80000 +$filesize
|
||||
=> cp.b $loadaddr 0xeff80000 $filesize
|
||||
|
||||
2. Program the DTB to NOR flash
|
||||
|
||||
=> tftp $loadaddr p1010rdb-pa.dtb
|
||||
=> erase 0xee000000 +$filesize
|
||||
=> cp.b $loadaddr 0xee000000 $filesize
|
||||
|
||||
3. Program the kernel to NOR flash
|
||||
|
||||
=> tftp $loadaddr uImage
|
||||
=> erase 0xee080000 +$filesize
|
||||
=> cp.b $loadaddr 0xee080000 $filesize
|
||||
|
||||
4. Program the root filesystem to NOR flash
|
||||
|
||||
=> tftp $loadaddr rootfs.jffs2
|
||||
=> erase 0xee800000 0xeff5ffff
|
||||
=> cp.b $loadaddr 0xee800000 $filesize
|
||||
|
||||
5. Booting your new system
|
||||
|
||||
=> setenv norboot 'setenv bootargs root=/dev/mtdblock2 rootfstype=jffs2 console=$consoledev,$baudrate;bootm 0xee080000 - 0xee000000'
|
||||
|
||||
If you want to set this boot option as default:
|
||||
|
||||
=> setenv bootcmd 'run norboot'
|
||||
=> saveenv
|
||||
|
||||
...or for a single boot:
|
||||
|
||||
=> run norboot
|
||||
|
||||
You can login with user "root".
|
|
@ -0,0 +1,374 @@
|
|||
CONFIG_PPC_85xx=y
|
||||
CONFIG_PHYS_64BIT=y
|
||||
CONFIG_SMP=y
|
||||
CONFIG_NR_CPUS=8
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_POSIX_MQUEUE=y
|
||||
CONFIG_FHANDLE=y
|
||||
CONFIG_AUDIT=y
|
||||
CONFIG_IRQ_DOMAIN_DEBUG=y
|
||||
CONFIG_NO_HZ_IDLE=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_BSD_PROCESS_ACCT=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=16
|
||||
CONFIG_CGROUPS=y
|
||||
CONFIG_NAMESPACES=y
|
||||
CONFIG_EXPERT=y
|
||||
CONFIG_KALLSYMS_ALL=y
|
||||
# CONFIG_SLUB_DEBUG is not set
|
||||
# CONFIG_COMPAT_BRK is not set
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
CONFIG_MODVERSIONS=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_MAC_PARTITION=y
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_POWERNV_MSI is not set
|
||||
CONFIG_MPC85xx_DS=y
|
||||
CONFIG_HIGHMEM=y
|
||||
CONFIG_HOTPLUG_CPU=y
|
||||
CONFIG_IRQ_ALL_CPUS=y
|
||||
CONFIG_FORCE_MAX_ZONEORDER=12
|
||||
# CONFIG_SUSPEND is not set
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCIEPORTBUS=y
|
||||
CONFIG_PCI_MSI=y
|
||||
CONFIG_RAPIDIO=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_XFRM_USER=y
|
||||
CONFIG_NET_KEY=m
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
CONFIG_IP_ADVANCED_ROUTER=y
|
||||
CONFIG_IP_MULTIPLE_TABLES=y
|
||||
CONFIG_IP_ROUTE_MULTIPATH=y
|
||||
CONFIG_IP_ROUTE_VERBOSE=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
CONFIG_IP_PNP_RARP=y
|
||||
CONFIG_NET_IPIP=y
|
||||
CONFIG_IP_MROUTE=y
|
||||
CONFIG_IP_PIMSM_V1=y
|
||||
CONFIG_IP_PIMSM_V2=y
|
||||
CONFIG_INET_ESP=m
|
||||
CONFIG_INET_XFRM_MODE_TRANSPORT=m
|
||||
CONFIG_INET_XFRM_MODE_TUNNEL=m
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
# CONFIG_INET_LRO is not set
|
||||
CONFIG_NETWORK_SECMARK=y
|
||||
CONFIG_NETFILTER=y
|
||||
CONFIG_NF_CONNTRACK=m
|
||||
CONFIG_NF_CONNTRACK_SECMARK=y
|
||||
CONFIG_NF_CONNTRACK_ZONES=y
|
||||
CONFIG_NF_CONNTRACK_EVENTS=y
|
||||
CONFIG_NF_CONNTRACK_TIMEOUT=y
|
||||
CONFIG_NF_CONNTRACK_TIMESTAMP=y
|
||||
CONFIG_NF_CT_PROTO_DCCP=m
|
||||
CONFIG_NF_CT_PROTO_UDPLITE=m
|
||||
CONFIG_NF_CONNTRACK_AMANDA=m
|
||||
CONFIG_NF_CONNTRACK_FTP=m
|
||||
CONFIG_NF_CONNTRACK_H323=m
|
||||
CONFIG_NF_CONNTRACK_IRC=m
|
||||
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
|
||||
CONFIG_NF_CONNTRACK_SNMP=m
|
||||
CONFIG_NF_CONNTRACK_PPTP=m
|
||||
CONFIG_NF_CONNTRACK_SANE=m
|
||||
CONFIG_NF_CONNTRACK_SIP=m
|
||||
CONFIG_NF_CONNTRACK_TFTP=m
|
||||
CONFIG_NF_CT_NETLINK=m
|
||||
CONFIG_NF_CT_NETLINK_TIMEOUT=m
|
||||
CONFIG_NF_CT_NETLINK_HELPER=m
|
||||
CONFIG_NETFILTER_NETLINK_QUEUE_CT=y
|
||||
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
|
||||
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
|
||||
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
|
||||
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
|
||||
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
|
||||
CONFIG_NETFILTER_XT_TARGET_DSCP=m
|
||||
CONFIG_NETFILTER_XT_TARGET_HMARK=m
|
||||
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
|
||||
CONFIG_NETFILTER_XT_TARGET_LED=m
|
||||
CONFIG_NETFILTER_XT_TARGET_LOG=m
|
||||
CONFIG_NETFILTER_XT_TARGET_MARK=m
|
||||
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
|
||||
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
|
||||
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
|
||||
CONFIG_NETFILTER_XT_TARGET_TEE=m
|
||||
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
|
||||
CONFIG_NETFILTER_XT_TARGET_TRACE=m
|
||||
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
|
||||
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
|
||||
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
|
||||
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
|
||||
CONFIG_NETFILTER_XT_MATCH_BPF=m
|
||||
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
|
||||
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
|
||||
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
|
||||
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
|
||||
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
|
||||
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
|
||||
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
|
||||
CONFIG_NETFILTER_XT_MATCH_CPU=m
|
||||
CONFIG_NETFILTER_XT_MATCH_DCCP=m
|
||||
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
|
||||
CONFIG_NETFILTER_XT_MATCH_DSCP=m
|
||||
CONFIG_NETFILTER_XT_MATCH_ESP=m
|
||||
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
|
||||
CONFIG_NETFILTER_XT_MATCH_HELPER=m
|
||||
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
|
||||
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
|
||||
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
|
||||
CONFIG_NETFILTER_XT_MATCH_MAC=m
|
||||
CONFIG_NETFILTER_XT_MATCH_MARK=m
|
||||
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
|
||||
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
|
||||
CONFIG_NETFILTER_XT_MATCH_OSF=m
|
||||
CONFIG_NETFILTER_XT_MATCH_OWNER=m
|
||||
CONFIG_NETFILTER_XT_MATCH_POLICY=m
|
||||
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
|
||||
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
|
||||
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
|
||||
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
|
||||
CONFIG_NETFILTER_XT_MATCH_REALM=m
|
||||
CONFIG_NETFILTER_XT_MATCH_RECENT=m
|
||||
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
|
||||
CONFIG_NETFILTER_XT_MATCH_STATE=m
|
||||
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
|
||||
CONFIG_NETFILTER_XT_MATCH_STRING=m
|
||||
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
|
||||
CONFIG_NETFILTER_XT_MATCH_TIME=m
|
||||
CONFIG_NETFILTER_XT_MATCH_U32=m
|
||||
CONFIG_NF_CONNTRACK_IPV4=m
|
||||
CONFIG_IP_NF_IPTABLES=m
|
||||
CONFIG_IP_NF_MATCH_AH=m
|
||||
CONFIG_IP_NF_MATCH_ECN=m
|
||||
CONFIG_IP_NF_MATCH_RPFILTER=m
|
||||
CONFIG_IP_NF_MATCH_TTL=m
|
||||
CONFIG_IP_NF_FILTER=m
|
||||
CONFIG_IP_NF_TARGET_REJECT=m
|
||||
CONFIG_IP_NF_TARGET_SYNPROXY=m
|
||||
CONFIG_IP_NF_TARGET_ULOG=m
|
||||
CONFIG_NF_NAT_IPV4=m
|
||||
CONFIG_IP_NF_TARGET_MASQUERADE=m
|
||||
CONFIG_IP_NF_TARGET_NETMAP=m
|
||||
CONFIG_IP_NF_TARGET_REDIRECT=m
|
||||
CONFIG_IP_NF_MANGLE=m
|
||||
CONFIG_IP_NF_TARGET_CLUSTERIP=m
|
||||
CONFIG_IP_NF_TARGET_ECN=m
|
||||
CONFIG_IP_NF_TARGET_TTL=m
|
||||
CONFIG_IP_NF_RAW=m
|
||||
CONFIG_IP_NF_ARPTABLES=m
|
||||
CONFIG_IP_NF_ARPFILTER=m
|
||||
CONFIG_IP_NF_ARP_MANGLE=m
|
||||
CONFIG_NF_CONNTRACK_IPV6=m
|
||||
CONFIG_IP6_NF_IPTABLES=m
|
||||
CONFIG_IP6_NF_MATCH_AH=m
|
||||
CONFIG_IP6_NF_MATCH_EUI64=m
|
||||
CONFIG_IP6_NF_MATCH_FRAG=m
|
||||
CONFIG_IP6_NF_MATCH_OPTS=m
|
||||
CONFIG_IP6_NF_MATCH_HL=m
|
||||
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
|
||||
CONFIG_IP6_NF_MATCH_MH=m
|
||||
CONFIG_IP6_NF_MATCH_RPFILTER=m
|
||||
CONFIG_IP6_NF_MATCH_RT=m
|
||||
CONFIG_IP6_NF_TARGET_HL=m
|
||||
CONFIG_IP6_NF_FILTER=m
|
||||
CONFIG_IP6_NF_TARGET_REJECT=m
|
||||
CONFIG_IP6_NF_TARGET_SYNPROXY=m
|
||||
CONFIG_IP6_NF_MANGLE=m
|
||||
CONFIG_IP6_NF_RAW=m
|
||||
CONFIG_NF_NAT_IPV6=m
|
||||
CONFIG_IP6_NF_TARGET_MASQUERADE=m
|
||||
CONFIG_IP6_NF_TARGET_NPT=m
|
||||
CONFIG_IP_SCTP=m
|
||||
CONFIG_BRIDGE=m
|
||||
CONFIG_CFG80211=m
|
||||
CONFIG_MAC80211=m
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
# CONFIG_FW_LOADER_USER_HELPER is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_FTL=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_CFI_INTELEXT=y
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
CONFIG_MTD_PHYSMAP_OF=y
|
||||
CONFIG_MTD_M25P80=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_FSL_ELBC=y
|
||||
CONFIG_MTD_NAND_FSL_IFC=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_PROC_DEVICETREE=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_NBD=y
|
||||
CONFIG_EEPROM_LEGACY=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_CHR_DEV_ST=y
|
||||
CONFIG_BLK_DEV_SR=y
|
||||
CONFIG_CHR_DEV_SG=y
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
CONFIG_SCSI_LOGGING=y
|
||||
CONFIG_ATA=y
|
||||
CONFIG_SATA_AHCI=y
|
||||
CONFIG_SATA_FSL=y
|
||||
CONFIG_SATA_SIL24=y
|
||||
CONFIG_PATA_ALI=y
|
||||
CONFIG_MD=y
|
||||
CONFIG_BLK_DEV_MD=y
|
||||
CONFIG_MD_LINEAR=y
|
||||
CONFIG_MD_RAID0=y
|
||||
CONFIG_MD_RAID1=y
|
||||
CONFIG_MD_RAID10=y
|
||||
CONFIG_MD_RAID456=y
|
||||
CONFIG_MD_MULTIPATH=y
|
||||
CONFIG_BCACHE=y
|
||||
CONFIG_BLK_DEV_DM=m
|
||||
CONFIG_DM_CRYPT=m
|
||||
CONFIG_DM_SNAPSHOT=m
|
||||
CONFIG_DM_THIN_PROVISIONING=m
|
||||
CONFIG_DM_CACHE=m
|
||||
CONFIG_DM_MIRROR=m
|
||||
CONFIG_DM_RAID=m
|
||||
CONFIG_DM_ZERO=m
|
||||
CONFIG_DM_MULTIPATH=m
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_DUMMY=y
|
||||
CONFIG_TUN=y
|
||||
CONFIG_NET_TULIP=y
|
||||
CONFIG_GIANFAR=y
|
||||
CONFIG_E1000E=y
|
||||
CONFIG_AT803X_PHY=y
|
||||
CONFIG_ATHEROS_PHY=y
|
||||
CONFIG_MARVELL_PHY=y
|
||||
CONFIG_DAVICOM_PHY=y
|
||||
CONFIG_CICADA_PHY=y
|
||||
CONFIG_VITESSE_PHY=y
|
||||
CONFIG_DP8384x_PHY=y
|
||||
CONFIG_FIXED_PHY=y
|
||||
CONFIG_PPP=m
|
||||
CONFIG_PPP_BSDCOMP=m
|
||||
CONFIG_PPP_DEFLATE=m
|
||||
CONFIG_PPP_FILTER=y
|
||||
CONFIG_PPP_MPPE=m
|
||||
CONFIG_PPP_MULTILINK=y
|
||||
CONFIG_PPPOE=m
|
||||
CONFIG_PPP_ASYNC=m
|
||||
CONFIG_PPP_SYNC_TTY=m
|
||||
CONFIG_ATH_CARDS=m
|
||||
CONFIG_ATH9K=m
|
||||
CONFIG_ATH9K_HTC=m
|
||||
CONFIG_RT2X00=m
|
||||
CONFIG_RT2800PCI=m
|
||||
CONFIG_RT73USB=m
|
||||
CONFIG_RT2800USB=m
|
||||
CONFIG_RT2800USB_RT3573=y
|
||||
CONFIG_RT2800USB_RT53XX=y
|
||||
CONFIG_RT2800USB_RT55XX=y
|
||||
# CONFIG_RTL_CARDS is not set
|
||||
# CONFIG_INPUT_MOUSEDEV is not set
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_VT_HW_CONSOLE_BINDING=y
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_SERIAL_8250_NR_UARTS=2
|
||||
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
|
||||
CONFIG_SERIAL_8250_MANY_PORTS=y
|
||||
CONFIG_SERIAL_8250_DETECT_IRQ=y
|
||||
CONFIG_SERIAL_8250_RSA=y
|
||||
CONFIG_NVRAM=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_MPC=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_FSL_SPI=y
|
||||
CONFIG_SPI_FSL_ESPI=y
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_MPC8XXX=y
|
||||
# CONFIG_HWMON is not set
|
||||
# CONFIG_VGA_ARB is not set
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_SOUND=m
|
||||
CONFIG_SND=m
|
||||
CONFIG_SND_HRTIMER=m
|
||||
# CONFIG_SND_SUPPORT_OLD_API is not set
|
||||
# CONFIG_SND_DRIVERS is not set
|
||||
CONFIG_SND_INTEL8X0=m
|
||||
# CONFIG_SND_PPC is not set
|
||||
# CONFIG_SND_SPI is not set
|
||||
# CONFIG_SND_USB is not set
|
||||
# CONFIG_HID_GENERIC is not set
|
||||
# CONFIG_USB_HID is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_EHCI_FSL=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
|
||||
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
CONFIG_MMC_SDHCI_OF_ESDHC=y
|
||||
CONFIG_EDAC=y
|
||||
CONFIG_EDAC_MM_EDAC=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_CMOS=y
|
||||
CONFIG_DMADEVICES=y
|
||||
CONFIG_FSL_DMA=y
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_EXT4_FS_POSIX_ACL=y
|
||||
CONFIG_EXT4_FS_SECURITY=y
|
||||
CONFIG_FANOTIFY=y
|
||||
CONFIG_FUSE_FS=m
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_PROC_KCORE=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_HUGETLBFS=y
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_JFFS2_SUMMARY=y
|
||||
CONFIG_JFFS2_FS_XATTR=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_SQUASHFS=y
|
||||
CONFIG_SQUASHFS_XATTR=y
|
||||
CONFIG_SQUASHFS_LZO=y
|
||||
CONFIG_SQUASHFS_XZ=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NFSD=m
|
||||
CONFIG_CIFS=m
|
||||
CONFIG_CIFS_XATTR=y
|
||||
CONFIG_CIFS_POSIX=y
|
||||
# CONFIG_CIFS_DEBUG is not set
|
||||
CONFIG_CIFS_SMB2=y
|
||||
CONFIG_CIFS_FSCACHE=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_CODEPAGE_850=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_NLS_UTF8=m
|
||||
CONFIG_CRC_T10DIF=y
|
||||
CONFIG_DEBUG_INFO=y
|
||||
CONFIG_DEBUG_FS=y
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
CONFIG_DETECT_HUNG_TASK=y
|
||||
CONFIG_CRYPTO_CBC=y
|
||||
CONFIG_CRYPTO_PCBC=m
|
||||
CONFIG_CRYPTO_HMAC=y
|
||||
CONFIG_CRYPTO_MD5=y
|
||||
CONFIG_CRYPTO_SHA1=y
|
||||
CONFIG_CRYPTO_SHA256=y
|
||||
CONFIG_CRYPTO_SHA512=y
|
||||
CONFIG_CRYPTO_DES=y
|
||||
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
||||
CONFIG_CRYPTO_DEV_TALITOS=y
|
|
@ -0,0 +1,51 @@
|
|||
From: Nikita Yushchenko <nyushchenko@dev.rtsoft.ru>
|
||||
Subject: [PATCH] usb: pci-quirks: do not access OHCI_FMINTERVAL register on ULI hw
|
||||
|
||||
This access causes hang on Freescale P2020DS board (that has OHCI
|
||||
provided by ULI 1533 chip).
|
||||
|
||||
Since preserving OHCI_FMINTERVAL was originally done only for NVIDIA
|
||||
hardware and only later (in c6187597) was turned unconditional, and
|
||||
c6187597 commit message again mentions only NVIDIA, I think it should be
|
||||
safe to disable preserving OHCI_FMINTERVAL if device vendor is ULI.
|
||||
|
||||
Signed-off-by: Nikita Yushchenko <nyushchenko@dev.rtsoft.ru>
|
||||
---
|
||||
drivers/usb/host/pci-quirks.c | 8 +++++---
|
||||
1 file changed, 5 insertions(+), 3 deletions(-)
|
||||
|
||||
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
|
||||
index 00661d3..5acbd5b 100644
|
||||
--- a/drivers/usb/host/pci-quirks.c
|
||||
+++ b/drivers/usb/host/pci-quirks.c
|
||||
@@ -571,7 +571,7 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
|
||||
{
|
||||
void __iomem *base;
|
||||
u32 control;
|
||||
- u32 fminterval;
|
||||
+ u32 uninitialized_var(fminterval);
|
||||
int cnt;
|
||||
|
||||
if (!mmio_resource_enabled(pdev, 0))
|
||||
@@ -619,7 +619,8 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
|
||||
}
|
||||
|
||||
/* software reset of the controller, preserving HcFmInterval */
|
||||
- fminterval = readl(base + OHCI_FMINTERVAL);
|
||||
+ if (pdev->vendor != PCI_VENDOR_ID_AL)
|
||||
+ fminterval = readl(base + OHCI_FMINTERVAL);
|
||||
writel(OHCI_HCR, base + OHCI_CMDSTATUS);
|
||||
|
||||
/* reset requires max 10 us delay */
|
||||
@@ -628,7 +629,8 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
|
||||
break;
|
||||
udelay(1);
|
||||
}
|
||||
- writel(fminterval, base + OHCI_FMINTERVAL);
|
||||
+ if (pdev->vendor != PCI_VENDOR_ID_AL)
|
||||
+ writel(fminterval, base + OHCI_FMINTERVAL);
|
||||
|
||||
/* Now the controller is safely in SUSPEND and nothing can wake it up */
|
||||
iounmap(base);
|
||||
--
|
||||
1.7.10.4
|
|
@ -0,0 +1,40 @@
|
|||
You'll need to program the files created by buildroot into the flash.
|
||||
The fast way is to tftp transfer the files via one of the network interfaces.
|
||||
|
||||
Alternatively you can transfer the files via serial console with an Ymodem
|
||||
file transfer from your terminal program by using a "loady" command
|
||||
from the u-boot prompt instead of the "tftp ..." commands stated below.
|
||||
Beware that serial console file transfers are quite slow!
|
||||
|
||||
1. Program the DTB to NOR flash
|
||||
|
||||
=> tftp ${loadaddr} p2020ds.dtb
|
||||
=> erase 0xeff00000 0xeff7ffff
|
||||
=> cp.b ${loadaddr} 0xeff00000 ${filesize}
|
||||
|
||||
2. Program the kernel to NOR flash
|
||||
|
||||
=> tftp ${loadaddr} uImage
|
||||
=> erase 0xec000000 0xec3fffff
|
||||
=> cp.b ${loadaddr} 0xec000000 ${filesize}
|
||||
|
||||
3. Program the root filesystem to NOR flash
|
||||
|
||||
=> tftp ${loadaddr} rootfs.jffs2
|
||||
=> erase 0xec400000 0xeeffffff
|
||||
=> cp.b ${loadaddr} 0xec400000 ${filesize}
|
||||
|
||||
4. Booting your new system
|
||||
|
||||
=> setenv jffs2boot 'setenv bootargs root=/dev/mtdblock4 rootfstype=jffs2 rw console=ttyS0,115200;bootm ec000000 - eff00000'
|
||||
|
||||
If you want to set this boot option as default:
|
||||
|
||||
=> setenv bootcmd 'run jffs2boot'
|
||||
=> saveenv
|
||||
|
||||
...or for a single boot:
|
||||
|
||||
=> run jffs2boot
|
||||
|
||||
You can login with user "root".
|
|
@ -0,0 +1,48 @@
|
|||
This the Buildroot support for the LPC3131 based Gnublin board (see here:
|
||||
http://en.gnublin.org/) and to the Elektor Linux board
|
||||
(http://www.elektor.com/news/elektor-presents-embedded-linux-made-easy.2147294.
|
||||
lynkx)
|
||||
|
||||
Unfortunately currently the AD and the pwm modules are not supported, i'm about
|
||||
to add also those drivers as well to the current kernel later.
|
||||
|
||||
Base kernel version: 3.7 (available here:
|
||||
https://gitorious.org/linux-3-7-gnublin/linux-3-7-gnublin/commits/gnublin-
|
||||
support)
|
||||
|
||||
U-boot version: 2009.11 (available here:
|
||||
https://gitorious.org/u-boot-gnublin-support/u-boot-gnublin-support)
|
||||
|
||||
|
||||
Steps to create a bootable SD card (with the given config you need an at least
|
||||
500 MB SD card):
|
||||
|
||||
1.Config buildroot with the gnublin_defconfig:
|
||||
|
||||
$ make gnublin_defconfig
|
||||
|
||||
2.Tweak the config for your needs:
|
||||
|
||||
$ make menuconfig
|
||||
|
||||
3.Build:
|
||||
|
||||
$ make
|
||||
|
||||
4.Create two partitions on your SD card, one with type of BootIt (fdisk ID: df),
|
||||
the size should be around 1M, and another partition with all of the left space
|
||||
on the card, and with the type of normal DOS partition.
|
||||
|
||||
5.From the output/images directory dump the u-boot image to the BootIt partition
|
||||
(probably you have to modify the output /dev files according to your system):
|
||||
|
||||
$ dd if=output/images/u-boot.bin of=/dev/sdc1
|
||||
|
||||
6.Dump the root fs image as well:
|
||||
|
||||
$ dd if=output/images/rootfs.ext2 of=/dev/sdc2
|
||||
|
||||
7.Insert the SD card into the board's slot, and your board should boot up with
|
||||
your newly created system.
|
||||
|
||||
Any feedback/report is welcome on the mr.zoltan.gyarmati[at]gmail.com
|
|
@ -0,0 +1,135 @@
|
|||
Lego Mindstorms EV3
|
||||
|
||||
Intro
|
||||
=====
|
||||
|
||||
This is the buildroot basic board support for the Lego Mindstorms EV3
|
||||
programmable brick. No support for sensors and drivers is provided for the
|
||||
moment.
|
||||
|
||||
The Lego Mindstorms EV3 brick comprises a Texas Instruments AM1808 SoC, with
|
||||
an ARM 926EJ-S main processor running at 300 MHz.
|
||||
See:
|
||||
- https://en.wikipedia.org/wiki/Lego_Mindstorms_EV3
|
||||
- http://www.lego.com/en-us/mindstorms/products/ev3/31313-mindstorms-ev3/
|
||||
- http://www.ti.com/product/am1808
|
||||
|
||||
The buildroot configuration uses the Linux kernel of the ev3dev project.
|
||||
See:
|
||||
- http://botbench.com/blog/2013/07/31/lego-mindstorms-ev3-source-code-available/
|
||||
- https://github.com/mindboards/ev3sources
|
||||
|
||||
Note that the EV3 configuration uses gcc 4.7, as the boot is broken with gcc
|
||||
4.8.
|
||||
|
||||
How it works
|
||||
============
|
||||
|
||||
Boot process :
|
||||
--------------
|
||||
|
||||
The u-boot on-board the EV3 brick has provision to boot a Linux kernel from the
|
||||
external µSD card. It will try to load a uImage from the first µSD card
|
||||
partition, which must be formatted with a FAT filesystem.
|
||||
|
||||
How to build it
|
||||
===============
|
||||
|
||||
Configure Buildroot
|
||||
-------------------
|
||||
|
||||
The lego_ev3_defconfig configuration provides basic support to boot on the Lego
|
||||
Mindstorms EV3 programmable brick:
|
||||
|
||||
$ make lego_ev3_defconfig
|
||||
|
||||
Build everything
|
||||
----------------
|
||||
|
||||
Note: you will need to have access to the network, since Buildroot will
|
||||
download the packages' sources.
|
||||
|
||||
$ make
|
||||
|
||||
Result of the build
|
||||
-------------------
|
||||
|
||||
After building, you should obtain this tree:
|
||||
|
||||
output/images/
|
||||
├── rootfs.ext2
|
||||
├── rootfs.ext3 -> rootfs.ext2
|
||||
└── uImage
|
||||
|
||||
|
||||
Prepare your SDcard
|
||||
===================
|
||||
|
||||
The following µSD card layout is recommended:
|
||||
|
||||
- First partition formated with a FAT filesystem, containing the uImage.
|
||||
- Second partition formatted as ext2 or ext3, containing the root filesystem.
|
||||
|
||||
Create the SDcard partition table
|
||||
----------------------------------
|
||||
|
||||
Determine the device associated to the SD card :
|
||||
|
||||
$ cat /proc/partitions
|
||||
|
||||
Let's assume it is /dev/mmcblk0 :
|
||||
|
||||
$ sudo fdisk /dev/mmcblk0
|
||||
|
||||
Delete all previous partitions by creating a new disklabel with 'o', then
|
||||
create the new partition table, using these options, pressing enter after each
|
||||
one:
|
||||
|
||||
* n p 1 2048 +10M t c
|
||||
* n p 2 22528 +256M
|
||||
|
||||
Using the 'p' option, the SD card's partition must look like this :
|
||||
|
||||
Device Boot Start End Blocks Id System
|
||||
/dev/mmcblk0p1 2048 22527 10240 c W95 FAT32 (LBA)
|
||||
/dev/mmcblk0p2 22528 546815 262144 83 Linux
|
||||
|
||||
Then write the partition table using 'w' and exit.
|
||||
|
||||
Make partition one a DOS partition :
|
||||
|
||||
$ sudo mkfs.vfat /dev/mmcblk0p1
|
||||
|
||||
Install the binaries to the SDcard
|
||||
----------------------------------
|
||||
|
||||
Remember your binaries are located in output/images/, go inside that directory :
|
||||
|
||||
$ cd output/images
|
||||
|
||||
Copy the Linux kernel:
|
||||
|
||||
$ sudo mkdir /mnt/sdcard
|
||||
$ sudo mount /dev/mmcblk0p1 /mnt/sdcard
|
||||
$ sudo cp uImage /mnt/sdcard
|
||||
$ sudo umount /mnt/sdcard
|
||||
|
||||
Copy the rootfs :
|
||||
|
||||
$ sudo dd if=rootfs.ext3 of=/dev/mmcblk0p2 bs=1M
|
||||
$ sync
|
||||
|
||||
It's Done!
|
||||
|
||||
Finish
|
||||
======
|
||||
|
||||
Eject your µSD card, insert it in your Lego EV3, and power it up.
|
||||
|
||||
To have a serial console, you will need a proper USB to Lego serial port
|
||||
adapter plugged into the EV3 sensors port 1.
|
||||
See:
|
||||
- http://botbench.com/blog/2013/08/15/ev3-creating-console-cable/
|
||||
- http://botbench.com/blog/2013/08/05/mindsensors-ev3-usb-console-adapter/
|
||||
|
||||
The serial port config to use is 115200/8-N-1.
|
|
@ -0,0 +1,6 @@
|
|||
set default="0"
|
||||
set timeout="5"
|
||||
|
||||
menuentry "Buildroot" {
|
||||
linux /bzImage root=/dev/mmcblk0p2 rootwait console=tty0 console=ttyS0,115200
|
||||
}
|
|
@ -0,0 +1,47 @@
|
|||
CONFIG_NO_HZ=y
|
||||
CONFIG_SMP=y
|
||||
CONFIG_X86_INTEL_LPSS=y
|
||||
CONFIG_MATOM=y
|
||||
CONFIG_EFI=y
|
||||
CONFIG_PM_RUNTIME=y
|
||||
CONFIG_CPU_FREQ=y
|
||||
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
|
||||
CONFIG_X86_INTEL_PSTATE=y
|
||||
CONFIG_X86_ACPI_CPUFREQ=y
|
||||
CONFIG_INTEL_IDLE=y
|
||||
CONFIG_IA32_EMULATION=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_CHR_DEV_SG=y
|
||||
CONFIG_ATA=y
|
||||
CONFIG_SATA_AHCI=y
|
||||
CONFIG_ATA_PIIX=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_R8169=y
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_SERIAL_8250_DW=y
|
||||
CONFIG_I2C_I801=y
|
||||
CONFIG_I2C_DESIGNWARE_PLATFORM=y
|
||||
CONFIG_I2C_DESIGNWARE_PCI=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_PXA2XX=y
|
||||
CONFIG_SPI_DESIGNWARE=y
|
||||
CONFIG_PINCTRL_BAYTRAIL=y
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_AGP=y
|
||||
CONFIG_DRM=y
|
||||
CONFIG_DRM_I915=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_NOP_USB_XCEIV=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_PCI=y
|
||||
CONFIG_MMC_SDHCI_ACPI=y
|
||||
CONFIG_PWM=y
|
||||
CONFIG_PWM_LPSS=y
|
||||
CONFIG_EXT4_FS=y
|
|
@ -0,0 +1,2 @@
|
|||
#!/bin/sh
|
||||
cp board/minnowboard-max/grub.cfg ${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg
|
|
@ -0,0 +1,40 @@
|
|||
Prepare the SD card for the Minnow Board MAX
|
||||
============================================
|
||||
|
||||
1. Partition the SD card with a GPT partition table
|
||||
|
||||
sudo cgdisk /dev/mmcblk0
|
||||
|
||||
Create two partitions:
|
||||
|
||||
a) First partition of a few dozens of megabytes, which will be
|
||||
used to store the bootloader and the kernel image. Type must
|
||||
be EF00 (EFI partition).
|
||||
|
||||
b) Second partition of any size, which will be used to store the
|
||||
root filesystem. Type must be 8300 (Linux filesystem)
|
||||
|
||||
2. Prepare the boot partition
|
||||
|
||||
We will format it, mount it, copy the EFI data generated by
|
||||
Buildroot, and the kernel image.
|
||||
|
||||
sudo mkfs.vfat -F 32 -n boot /dev/mmcblk0p1
|
||||
sudo mount /dev/mmcblk0p1 /mnt
|
||||
sudo cp -a output/images/efi-part/* /mnt/
|
||||
sudo cp output/images/bzImage /mnt/
|
||||
sudo umount /mnt
|
||||
|
||||
3. Prepare the root partition
|
||||
|
||||
We will format it, mount it, and extract the root filesystem.
|
||||
|
||||
sudo mkfs.ext4 -L root /dev/mmcblk0p2
|
||||
sudo mount /dev/mmcblk0p2 /mnt
|
||||
sudo tar -C /mnt -xf output/images/rootfs.tar
|
||||
sudo umount /mnt
|
||||
|
||||
4. Enjoy
|
||||
|
||||
Additional information about this board can be found at
|
||||
http://www.minnowboard.org/ or http://elinux.org/Minnowboard:MinnowMax.
|
|
@ -0,0 +1,6 @@
|
|||
set default="0"
|
||||
set timeout="5"
|
||||
|
||||
menuentry "Buildroot" {
|
||||
linux /bzImage root=/dev/mmcblk0p2 rootwait console=ttyPCH0,115200
|
||||
}
|
|
@ -0,0 +1,172 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_POSIX_MQUEUE=y
|
||||
CONFIG_NO_HZ=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_BSD_PROCESS_ACCT=y
|
||||
CONFIG_BSD_PROCESS_ACCT_V3=y
|
||||
CONFIG_RCU_FANOUT=32
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_CGROUPS=y
|
||||
CONFIG_CGROUP_DEBUG=y
|
||||
CONFIG_CGROUP_FREEZER=y
|
||||
CONFIG_CGROUP_DEVICE=y
|
||||
CONFIG_CPUSETS=y
|
||||
CONFIG_CGROUP_CPUACCT=y
|
||||
CONFIG_RESOURCE_COUNTERS=y
|
||||
CONFIG_MEMCG=y
|
||||
CONFIG_MEMCG_SWAP=y
|
||||
CONFIG_MEMCG_KMEM=y
|
||||
CONFIG_CGROUP_SCHED=y
|
||||
CONFIG_RT_GROUP_SCHED=y
|
||||
CONFIG_BLK_CGROUP=y
|
||||
CONFIG_NAMESPACES=y
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_EMBEDDED=y
|
||||
CONFIG_PROFILING=y
|
||||
CONFIG_OPROFILE=y
|
||||
CONFIG_KPROBES=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_SMP=y
|
||||
CONFIG_MATOM=y
|
||||
CONFIG_SCHED_SMT=y
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
|
||||
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
|
||||
# CONFIG_MTRR_SANITIZER is not set
|
||||
CONFIG_EFI=y
|
||||
CONFIG_EFI_STUB=y
|
||||
CONFIG_HZ_1000=y
|
||||
CONFIG_PM_RUNTIME=y
|
||||
CONFIG_PM_DEBUG=y
|
||||
CONFIG_PM_ADVANCED_DEBUG=y
|
||||
CONFIG_CPU_FREQ=y
|
||||
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
|
||||
CONFIG_X86_ACPI_CPUFREQ=y
|
||||
CONFIG_INTEL_IDLE=y
|
||||
CONFIG_PCI_MMCONFIG=y
|
||||
CONFIG_PCIEPORTBUS=y
|
||||
CONFIG_PCI_MSI=y
|
||||
CONFIG_HOTPLUG_PCI=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_XFRM_SUB_POLICY=y
|
||||
CONFIG_NET_KEY_MIGRATE=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
CONFIG_IP_ADVANCED_ROUTER=y
|
||||
CONFIG_IP_MULTIPLE_TABLES=y
|
||||
CONFIG_IP_ROUTE_MULTIPATH=y
|
||||
CONFIG_IP_ROUTE_VERBOSE=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
CONFIG_IP_PNP_RARP=y
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
CONFIG_FW_LOADER=m
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_CRYPTOLOOP=m
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_PCH_PHUB=m
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_BLK_DEV_SR=y
|
||||
CONFIG_CHR_DEV_SG=y
|
||||
CONFIG_ATA=y
|
||||
CONFIG_SATA_AHCI=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_DUMMY=m
|
||||
CONFIG_NETCONSOLE=y
|
||||
CONFIG_TUN=m
|
||||
CONFIG_PCH_GBE=m
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
# CONFIG_KEYBOARD_ATKBD is not set
|
||||
CONFIG_KEYBOARD_GPIO_POLLED=y
|
||||
# CONFIG_MOUSE_PS2 is not set
|
||||
# CONFIG_SERIO_I8042 is not set
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_SERIAL_PCH_UART=y
|
||||
CONFIG_SERIAL_PCH_UART_CONSOLE=y
|
||||
CONFIG_GEN_RTC=y
|
||||
CONFIG_GEN_RTC_X=y
|
||||
CONFIG_HPET=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=m
|
||||
CONFIG_I2C_EG20T=m
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_GPIO=m
|
||||
CONFIG_SPI_TOPCLIFF_PCH=m
|
||||
CONFIG_SPI_SPIDEV=m
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_DEBUG_GPIO=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_GPIO_GENERIC_PLATFORM=y
|
||||
CONFIG_GPIO_SCH=y
|
||||
CONFIG_GPIO_PCH=y
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_SOFT_WATCHDOG=m
|
||||
CONFIG_AGP=m
|
||||
CONFIG_DRM=m
|
||||
CONFIG_FB=y
|
||||
CONFIG_FB_EFI=y
|
||||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
|
||||
CONFIG_SOUND=m
|
||||
CONFIG_SND=m
|
||||
CONFIG_SND_HDA_INTEL=m
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_SUSPEND=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_EHCI_ROOT_HUB_TT=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_GADGET=m
|
||||
CONFIG_USB_EG20T=m
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_PCI=y
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
CONFIG_LEDS_TRIGGER_TIMER=y
|
||||
CONFIG_LEDS_TRIGGER_ONESHOT=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
|
||||
CONFIG_LEDS_TRIGGER_CPU=y
|
||||
CONFIG_LEDS_TRIGGER_GPIO=y
|
||||
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
|
||||
CONFIG_DMADEVICES=y
|
||||
CONFIG_PCH_DMA=y
|
||||
CONFIG_MINNOWBOARD=y
|
||||
CONFIG_MINNOWBOARD_GPIO=m
|
||||
CONFIG_MINNOWBOARD_KEYS=m
|
||||
CONFIG_EFI_VARS=y
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_EXT4_FS_POSIX_ACL=y
|
||||
CONFIG_EXT4_FS_SECURITY=y
|
||||
CONFIG_FANOTIFY=y
|
||||
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
|
||||
CONFIG_ISO9660_FS=y
|
||||
CONFIG_MSDOS_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_PROC_KCORE=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_TMPFS_POSIX_ACL=y
|
||||
CONFIG_CONFIGFS_FS=m
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_PRINTK_TIME=y
|
||||
CONFIG_FRAME_WARN=1024
|
||||
CONFIG_TIMER_STATS=y
|
||||
CONFIG_LATENCYTOP=y
|
||||
CONFIG_BLK_DEV_IO_TRACE=y
|
|
@ -0,0 +1,2 @@
|
|||
#!/bin/sh
|
||||
cp board/minnowboard/grub.cfg ${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg
|
|
@ -0,0 +1,40 @@
|
|||
Prepare the SD card for the Minnow Board
|
||||
========================================
|
||||
|
||||
1. Partition the SD card with a GPT partition table
|
||||
|
||||
sudo cgdisk /dev/mmcblk0
|
||||
|
||||
Create two partitions:
|
||||
|
||||
a) First partition of a few dozens of megabytes, which will be
|
||||
used to store the bootloader and the kernel image. Type must
|
||||
be EF00 (EFI partition).
|
||||
|
||||
b) Second partition of any size, which will be used to store the
|
||||
root filesystem. Type must be 8300 (Linux filesystem)
|
||||
|
||||
2. Prepare the boot partition
|
||||
|
||||
We will format it, mount it, copy the EFI data generated by
|
||||
Buildroot, and the kernel image.
|
||||
|
||||
sudo mkfs.vfat -F 32 -n boot /dev/mmcblk0p1
|
||||
sudo mount /dev/mmcblk0p1 /mnt
|
||||
sudo cp -a output/images/efi-part/* /mnt/
|
||||
sudo cp output/images/bzImage /mnt/
|
||||
sudo umount /mnt
|
||||
|
||||
3. Prepare the root partition
|
||||
|
||||
We will format it, mount it, and extract the root filesystem.
|
||||
|
||||
sudo mkfs.ext3 -L root /dev/mmcblk0p2
|
||||
sudo mount /dev/mmcblk0p2 /mnt
|
||||
sudo tar -C /mnt -xf output/images/rootfs.tar
|
||||
sudo umount /mnt
|
||||
|
||||
4. Enjoy
|
||||
|
||||
Additional information about this board can be found at
|
||||
http://www.minnowboard.org/.
|
|
@ -0,0 +1,152 @@
|
|||
CONFIG_SYSVIPC=y
|
||||
CONFIG_NO_HZ=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_PERF_EVENTS=y
|
||||
# CONFIG_COMPAT_BRK is not set
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_FORCE_LOAD=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
CONFIG_MODULE_FORCE_UNLOAD=y
|
||||
CONFIG_MODVERSIONS=y
|
||||
CONFIG_BLK_DEV_INTEGRITY=y
|
||||
# CONFIG_ARCH_MULTI_V7 is not set
|
||||
CONFIG_ARCH_MXS=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_PREEMPT_VOLUNTARY=y
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_ARM_APPENDED_DTB=y
|
||||
CONFIG_ARM_ATAG_DTB_COMPAT=y
|
||||
CONFIG_CMDLINE="console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait"
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_SYN_COOKIES=y
|
||||
CONFIG_CFG80211=y
|
||||
CONFIG_CFG80211_WEXT=y
|
||||
CONFIG_MAC80211=y
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
# CONFIG_FIRMWARE_IN_KERNEL is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_DATAFLASH=y
|
||||
CONFIG_MTD_SST25L=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_GPMI_NAND=y
|
||||
CONFIG_MTD_UBI=y
|
||||
# CONFIG_BLK_DEV is not set
|
||||
CONFIG_EEPROM_AT24=y
|
||||
CONFIG_EEPROM_93CX6=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_NETDEVICES=y
|
||||
# CONFIG_ETHERNET is not set
|
||||
CONFIG_USB_USBNET=y
|
||||
CONFIG_USB_NET_SMSC95XX=y
|
||||
CONFIG_RTL8187=m
|
||||
CONFIG_ATH_CARDS=m
|
||||
CONFIG_ATH9K_HTC=m
|
||||
CONFIG_RT2X00=m
|
||||
CONFIG_RT73USB=m
|
||||
CONFIG_RT2800USB=m
|
||||
CONFIG_RT2800USB_RT53XX=y
|
||||
CONFIG_RT2800USB_RT55XX=y
|
||||
CONFIG_RT2800USB_UNKNOWN=y
|
||||
CONFIG_RTL_CARDS=m
|
||||
CONFIG_RTL8192CU=m
|
||||
# CONFIG_RTLWIFI_DEBUG is not set
|
||||
CONFIG_ZD1211RW=m
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
# CONFIG_DEVKMEM is not set
|
||||
CONFIG_SERIAL_AMBA_PL011=y
|
||||
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
|
||||
CONFIG_SERIAL_MXS_AUART=y
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
CONFIG_I2C=y
|
||||
# CONFIG_I2C_COMPAT is not set
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_MXS=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_GPIO=m
|
||||
CONFIG_SPI_MXS=y
|
||||
CONFIG_PTP_1588_CLOCK=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_STMP3XXX_RTC_WATCHDOG=y
|
||||
CONFIG_REGULATOR=y
|
||||
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
||||
CONFIG_FB=y
|
||||
CONFIG_FB_MXS=y
|
||||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
CONFIG_LCD_CLASS_DEVICE=y
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
||||
CONFIG_BACKLIGHT_PWM=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_LOGO=y
|
||||
CONFIG_SOUND=y
|
||||
CONFIG_SND=y
|
||||
CONFIG_SND_HRTIMER=y
|
||||
# CONFIG_SND_SUPPORT_OLD_API is not set
|
||||
# CONFIG_SND_VERBOSE_PROCFS is not set
|
||||
# CONFIG_SND_DRIVERS is not set
|
||||
# CONFIG_SND_ARM is not set
|
||||
# CONFIG_SND_SPI is not set
|
||||
# CONFIG_SND_USB is not set
|
||||
CONFIG_SND_SOC=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_CHIPIDEA=y
|
||||
CONFIG_USB_CHIPIDEA_HOST=y
|
||||
CONFIG_USB_MXS_PHY=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_MXS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_TRIGGER_TIMER=y
|
||||
CONFIG_LEDS_TRIGGER_ONESHOT=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
|
||||
CONFIG_LEDS_TRIGGER_GPIO=y
|
||||
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_STMP=y
|
||||
CONFIG_DMADEVICES=y
|
||||
CONFIG_MXS_DMA=y
|
||||
CONFIG_STAGING=y
|
||||
CONFIG_MXS_LRADC=y
|
||||
CONFIG_IIO=y
|
||||
CONFIG_IIO_SYSFS_TRIGGER=y
|
||||
CONFIG_PWM=y
|
||||
CONFIG_PWM_MXS=y
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_TMPFS_POSIX_ACL=y
|
||||
# CONFIG_MISC_FILESYSTEMS is not set
|
||||
# CONFIG_NETWORK_FILESYSTEMS is not set
|
||||
CONFIG_PRINTK_TIME=y
|
||||
CONFIG_FRAME_WARN=2048
|
||||
CONFIG_UNUSED_SYMBOLS=y
|
||||
CONFIG_DEBUG_FS=y
|
||||
CONFIG_STRICT_DEVMEM=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_KEYS=y
|
||||
CONFIG_CRYPTO_DEFLATE=y
|
||||
CONFIG_CRYPTO_LZO=y
|
||||
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
||||
CONFIG_CRYPTO_DEV_MXS_DCP=y
|
||||
CONFIG_CRC_CCITT=y
|
||||
CONFIG_CRC_ITU_T=y
|
||||
CONFIG_CRC7=m
|
||||
CONFIG_FONTS=y
|
|
@ -0,0 +1,122 @@
|
|||
Forward-ported patch from https://github.com/koliqi/imx23-olinuxino
|
||||
for mxs-bootlets-10.12.01
|
||||
|
||||
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
|
||||
|
||||
diff -Nura imx-bootlets-src-10.12.01/linux_prep/board/imx23_olinuxino_dev.c imx-bootlets-src-10.12.01-olinuxino/linux_prep/board/imx23_olinuxino_dev.c
|
||||
--- imx-bootlets-src-10.12.01/linux_prep/board/imx23_olinuxino_dev.c 1969-12-31 21:00:00.000000000 -0300
|
||||
+++ imx-bootlets-src-10.12.01-olinuxino/linux_prep/board/imx23_olinuxino_dev.c 2013-05-17 15:07:33.282961551 -0300
|
||||
@@ -0,0 +1,54 @@
|
||||
+/*
|
||||
+ * Platform specific data for the IMX23_OLINUXINO development board
|
||||
+ *
|
||||
+ * Fadil Berisha <fadil.r.berisha@gmail.com>
|
||||
+ *
|
||||
+ * Copyright 2008 SigmaTel, Inc
|
||||
+ * Copyright 2008 Embedded Alley Solutions, Inc
|
||||
+ * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
|
||||
+ *
|
||||
+ * This file is licensed under the terms of the GNU General Public License
|
||||
+ * version 2. This program is licensed "as is" without any warranty of any
|
||||
+ * kind, whether express or implied.
|
||||
+ *
|
||||
+ * http://www.opensource.org/licenses/gpl-license.html
|
||||
+ * http://www.gnu.org/copyleft/gpl.html
|
||||
+ */
|
||||
+#include <setup.h>
|
||||
+#include <keys.h>
|
||||
+#include <lradc_buttons.h>
|
||||
+
|
||||
+/************************************************
|
||||
+ * LRADC keyboard data *
|
||||
+ ************************************************/
|
||||
+int lradc_keypad_ch = LRADC_CH0;
|
||||
+int lradc_vddio_ch = LRADC_CH6;
|
||||
+
|
||||
+struct lradc_keycode lradc_keycodes[] = {
|
||||
+ { 100, KEY4 },
|
||||
+ { 306, KEY5 },
|
||||
+ { 601, KEY6 },
|
||||
+ { 932, KEY7 },
|
||||
+ { 1260, KEY8 },
|
||||
+ { 1424, KEY9 },
|
||||
+ { 1707, KEY10 },
|
||||
+ { 2207, KEY11 },
|
||||
+ { 2525, KEY12 },
|
||||
+ { 2831, KEY13 },
|
||||
+ { 3134, KEY14 },
|
||||
+ { -1, 0 },
|
||||
+};
|
||||
+
|
||||
+/************************************************
|
||||
+ * Magic key combinations for Armadillo *
|
||||
+ ************************************************/
|
||||
+u32 magic_keys[MAGIC_KEY_NR] = {
|
||||
+ [MAGIC_KEY1] = KEY4,
|
||||
+ [MAGIC_KEY2] = KEY6,
|
||||
+ [MAGIC_KEY3] = KEY10,
|
||||
+};
|
||||
+
|
||||
+/************************************************
|
||||
+ * Default command line *
|
||||
+ ************************************************/
|
||||
+char cmdline_def[] = "console=ttyAMA0,115200";
|
||||
diff -Nura imx-bootlets-src-10.12.01/linux_prep/cmdlines/imx23_olinuxino_dev.txt imx-bootlets-src-10.12.01-olinuxino/linux_prep/cmdlines/imx23_olinuxino_dev.txt
|
||||
--- imx-bootlets-src-10.12.01/linux_prep/cmdlines/imx23_olinuxino_dev.txt 1969-12-31 21:00:00.000000000 -0300
|
||||
+++ imx-bootlets-src-10.12.01-olinuxino/linux_prep/cmdlines/imx23_olinuxino_dev.txt 2013-05-17 15:07:49.663496106 -0300
|
||||
@@ -0,0 +1,3 @@
|
||||
+console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait
|
||||
+console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait
|
||||
+console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait
|
||||
diff -Nura imx-bootlets-src-10.12.01/linux_prep/core/setup.c imx-bootlets-src-10.12.01-olinuxino/linux_prep/core/setup.c
|
||||
--- imx-bootlets-src-10.12.01/linux_prep/core/setup.c 2010-11-04 04:35:38.000000000 -0300
|
||||
+++ imx-bootlets-src-10.12.01-olinuxino/linux_prep/core/setup.c 2013-05-17 15:08:39.246114205 -0300
|
||||
@@ -84,6 +84,8 @@
|
||||
#include "../../mach-mx28/includes/registers/regsrtc.h"
|
||||
#elif defined(STMP378X)
|
||||
#include "../../mach-mx23/includes/registers/regsrtc.h"
|
||||
+#elif defined(IMX23_OLINUXINO)
|
||||
+#include "../../mach-mx23/includes/registers/regsrtc.h"
|
||||
#endif
|
||||
|
||||
#define NAND_SECONDARY_BOOT 0x00000002
|
||||
diff -Nura imx-bootlets-src-10.12.01/linux_prep/include/mx23/platform.h imx-bootlets-src-10.12.01-olinuxino/linux_prep/include/mx23/platform.h
|
||||
--- imx-bootlets-src-10.12.01/linux_prep/include/mx23/platform.h 2010-11-04 04:35:38.000000000 -0300
|
||||
+++ imx-bootlets-src-10.12.01-olinuxino/linux_prep/include/mx23/platform.h 2013-05-17 15:09:21.006476997 -0300
|
||||
@@ -19,6 +19,8 @@
|
||||
|
||||
#if defined (BOARD_STMP378X_DEV)
|
||||
#define MACHINE_ID 0xa45
|
||||
+#elif defined (BOARD_IMX23_OLINUXINO_DEV)
|
||||
+#define MACHINE_ID 0x1009
|
||||
#else
|
||||
#error "Allocate a machine ID for your board"
|
||||
#endif
|
||||
diff -Nura imx-bootlets-src-10.12.01/linux_prep/Makefile imx-bootlets-src-10.12.01-olinuxino/linux_prep/Makefile
|
||||
--- imx-bootlets-src-10.12.01/linux_prep/Makefile 2010-11-04 04:35:38.000000000 -0300
|
||||
+++ imx-bootlets-src-10.12.01-olinuxino/linux_prep/Makefile 2013-05-17 15:09:53.554539143 -0300
|
||||
@@ -69,6 +69,11 @@
|
||||
HW_OBJS = $(LRADC_OBJS)
|
||||
CFLAGS += -DMX28 -DBOARD_MX28_EVK
|
||||
endif
|
||||
+ifeq ($(BOARD), imx23_olinuxino_dev)
|
||||
+ARCH = mx23
|
||||
+HW_OBJS = $(LRADC_OBJS)
|
||||
+CFLAGS += -DIMX23_OLINUXINO -DBOARD_IMX23_OLINUXINO_DEV
|
||||
+endif
|
||||
|
||||
# Generic code
|
||||
CORE_OBJS = entry.o resume.o cmdlines.o setup.o keys.o
|
||||
diff -Nura imx-bootlets-src-10.12.01/Makefile imx-bootlets-src-10.12.01-olinuxino/Makefile
|
||||
--- imx-bootlets-src-10.12.01/Makefile 2010-11-04 04:35:38.000000000 -0300
|
||||
+++ imx-bootlets-src-10.12.01-olinuxino/Makefile 2013-05-17 15:23:53.709956619 -0300
|
||||
@@ -16,6 +16,9 @@
|
||||
ifeq ($(BOARD), iMX28_EVK)
|
||||
ARCH = mx28
|
||||
endif
|
||||
+ifeq ($(BOARD), imx23_olinuxino_dev)
|
||||
+ARCH = mx23
|
||||
+endif
|
||||
|
||||
all: build_prep gen_bootstream
|
||||
|
|
@ -0,0 +1,57 @@
|
|||
This configuration is intended as a base image.
|
||||
It includes kernel and firmware support for the common USB WiFi hardware.
|
||||
Packages for WiFi support are up to the user, you'll probably want
|
||||
one or more of: hostapd, iw, wireless_tools and/or wpa_supplicant.
|
||||
|
||||
It also pulls up the console on the serial port, not on TV output.
|
||||
|
||||
You'll need a spare MicroSD card with Freescale's special partition layout.
|
||||
This is basically two partitions:
|
||||
|
||||
1) Type 53, the bootstrap + bootloader/kernel partition, should be 16MB.
|
||||
2) Anything you like, for this example an ext2 partition, type 83 (linux).
|
||||
|
||||
Assuming you see your MicroSD card as /dev/sdc you'd need to do, as root
|
||||
and from the buildroot project top level directory:
|
||||
(remember to replace /dev/sdc* with the appropiate device name!)
|
||||
|
||||
***** WARNING: Double check that /dev/sdc is your MicroSD card *****
|
||||
***** It might be /dev/sdb or some other device name *****
|
||||
***** Failure to do so may result in you wiping your hard disk *****
|
||||
|
||||
1. Unmount the filesystem(s) if they're already mounted, usually...
|
||||
|
||||
# for fs in `grep /dev/sdc /proc/mounts|cut -d ' ' -f 1`;do umount $fs;done
|
||||
|
||||
...should work
|
||||
|
||||
2. Blank the partition table out
|
||||
|
||||
# dd if=/dev/zero of=/dev/sdc bs=1024 count=1024
|
||||
|
||||
3. Set up the partitions
|
||||
|
||||
# fdisk /dev/sdc
|
||||
n
|
||||
p
|
||||
1
|
||||
<ENTER>
|
||||
+16MB
|
||||
t
|
||||
53
|
||||
n
|
||||
p
|
||||
2
|
||||
<ENTER>
|
||||
<ENTER>
|
||||
w
|
||||
|
||||
4. Fill up the first (bootstrap + kernel) partition
|
||||
# dd if=output/images/imx23_olinuxino_dev_linux.sb bs=512 of=/dev/sdc1 seek=4
|
||||
|
||||
5. Fill up the second (filesystem) partition
|
||||
# dd if=output/images/rootfs.ext2 of=/dev/sdc2 bs=512
|
||||
|
||||
6. Remove the MicroSD card from your linux PC and put it into your olinuxino.
|
||||
|
||||
7. Boot! You're done!
|
|
@ -0,0 +1,56 @@
|
|||
CONFIG_SYSVIPC=y
|
||||
CONFIG_POSIX_MQUEUE=y
|
||||
CONFIG_FHANDLE=y
|
||||
CONFIG_NO_HZ_IDLE=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_TASKSTATS=y
|
||||
CONFIG_SCHED_AUTOGROUP=y
|
||||
CONFIG_PROFILING=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
CONFIG_BLK_DEV_BSGLIB=y
|
||||
CONFIG_ARCH_VEXPRESS=y
|
||||
CONFIG_SMP=y
|
||||
CONFIG_TRANSPARENT_HUGEPAGE=y
|
||||
CONFIG_BINFMT_MISC=y
|
||||
CONFIG_COMPAT=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_PACKET_DIAG=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_NET_KEY=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
CONFIG_IP_ADVANCED_ROUTER=y
|
||||
CONFIG_BRIDGE=m
|
||||
CONFIG_NET_SCHED=y
|
||||
CONFIG_VSOCKETS=y
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
CONFIG_VIRTIO_BLK=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_CHR_DEV_SG=y
|
||||
CONFIG_SCSI_CONSTANTS=y
|
||||
CONFIG_SCSI_LOGGING=y
|
||||
CONFIG_SCSI_SCAN_ASYNC=y
|
||||
CONFIG_SCSI_VIRTIO=y
|
||||
CONFIG_ATA=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_DUMMY=y
|
||||
CONFIG_MACVLAN=y
|
||||
CONFIG_VIRTIO_NET=y
|
||||
CONFIG_NLMON=y
|
||||
CONFIG_VT_HW_CONSOLE_BINDING=y
|
||||
CONFIG_SERIAL_AMBA_PL011=y
|
||||
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
|
||||
CONFIG_VIRTIO_CONSOLE=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_HW_RANDOM_VIRTIO=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_VIRTIO_MMIO=y
|
||||
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
|
||||
CONFIG_MAILBOX=y
|
||||
CONFIG_PL320_MBOX=y
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_TMPFS_POSIX_ACL=y
|
|
@ -0,0 +1,7 @@
|
|||
Run the emulation with:
|
||||
|
||||
qemu-system-aarch64 -M virt -cpu cortex-a57 -nographic -smp 1 -kernel output/images/Image -append "console=ttyAMA0" -netdev user,id=eth0 -device virtio-net-device,netdev=eth0
|
||||
|
||||
The login prompt will appear in the terminal that started Qemu.
|
||||
|
||||
Tested with QEMU 2.1.2
|
|
@ -0,0 +1,10 @@
|
|||
Run the emulation with:
|
||||
|
||||
qemu-system-arm -M nuri -kernel output/images/zImage -append "console=ttySAC1,115200" -smp 2 -serial null -serial stdio
|
||||
|
||||
The login prompt will appear in the terminal that started Qemu. The
|
||||
graphical window is the framebuffer.
|
||||
|
||||
Startup time is slow because of the SMP CPU emulation so be patient.
|
||||
|
||||
Tested with QEMU 2.1.2
|
|
@ -0,0 +1,81 @@
|
|||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_ARCH_VERSATILE=y
|
||||
CONFIG_MACH_VERSATILE_AB=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="root=1f03 mem=32M"
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
# CONFIG_INET_DIAG is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_CFI_ADV_OPTIONS=y
|
||||
CONFIG_MTD_CFI_INTELEXT=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_EEPROM_LEGACY=m
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_SCSI_SYM53C8XX_2=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_SMC91X=y
|
||||
# CONFIG_SERIO_SERPORT is not set
|
||||
CONFIG_SERIO_AMBAKMI=y
|
||||
CONFIG_LEGACY_PTY_COUNT=16
|
||||
CONFIG_SERIAL_8250=m
|
||||
CONFIG_SERIAL_8250_EXTENDED=y
|
||||
CONFIG_SERIAL_8250_MANY_PORTS=y
|
||||
CONFIG_SERIAL_8250_SHARE_IRQ=y
|
||||
CONFIG_SERIAL_8250_RSA=y
|
||||
CONFIG_SERIAL_AMBA_PL011=y
|
||||
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=m
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_FB=y
|
||||
CONFIG_FB_ARMCLCD=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_SOUND=y
|
||||
CONFIG_SND=m
|
||||
CONFIG_SND_MIXER_OSS=m
|
||||
CONFIG_SND_PCM_OSS=m
|
||||
CONFIG_SND_ARMAACI=m
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_ARMMMCI=m
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_VFAT_FS=m
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_TMPFS_POSIX_ACL=y
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_MINIX_FS=y
|
||||
CONFIG_ROMFS_FS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NFSD=y
|
||||
CONFIG_NFSD_V3=y
|
||||
CONFIG_NLS_CODEPAGE_850=m
|
||||
CONFIG_NLS_ISO8859_1=m
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_DEBUG_LL=y
|
||||
CONFIG_FONTS=y
|
||||
CONFIG_FONT_ACORN_8x8=y
|
|
@ -0,0 +1,8 @@
|
|||
Run the emulation with:
|
||||
|
||||
qemu-system-arm -M versatilepb -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=scsi -append "root=/dev/sda console=ttyAMA0,115200" -serial stdio -net nic,model=smc91c111 -net user
|
||||
|
||||
The login prompt will appear in the terminal that started Qemu. The
|
||||
graphical window is the framebuffer.
|
||||
|
||||
Tested with QEMU 2.1.2
|
|
@ -0,0 +1,8 @@
|
|||
Run the emulation with:
|
||||
|
||||
qemu-system-arm -M vexpress-a9 -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=sd -append "console=ttyAMA0,115200 root=/dev/mmcblk0" -serial stdio -net nic,model=lan9118 -net user
|
||||
|
||||
The login prompt will appear in the terminal that started Qemu. The
|
||||
graphical window is the framebuffer.
|
||||
|
||||
Tested with QEMU 2.1.2
|
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue