In make, ifndef VAR means if 'VAR is not set to the empty string', and
NOT 'VAR is not defined', which meant that you couldn't specify empty
FOO_HOST_DEPENDENCIES.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
By deriving HOST_XLIB_LIBX11_DEPENDENCIES from XLIB_LIBX11_DEPENDENCIES, it
turned out that that one had a redundant dependency on xproto_bigreqsproto.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
host support was removed in 7b38fc20ba (cairo: remove host variant),
but it forgot to remove the HOST_CAIRO_CONF_OPT assignment.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Open2300 is a package of software tools that reads (and writes) data
from a Lacrosse WS2300/WS2305/WS2310/WS2315 Weather Station.
This package will install all the binaries on the target.
Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Has been marked as broken since July 2010 (39e6ba1b), and nobody has
stepped up to support it, so now finally remove it completely.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Added support for compiling tiffcp and tiff2pdf.
Added options for compiling out various libtiff features. By default,
all libtiff features are built so that the result is the same as before
this change.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
zlib is needed for the host-setuptools package
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
all external python packages/libraries should reside in
"external python modules" section.
Move existing modules python-serial and python-mad there
Move python-mad from package/multimedia to package
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the ability for buildroot to build an SPE ABI enabled toolchain.
This is mandatory for e500v1/v2 cores since they don't support classic
FPU mode as the e500mc does.
Useful for Freescale's PowerQUICC III and single/dual-core QorIQ
line of processors.
The new TARGET_ABI variable is used rather than TARGET_CFLAGS for
uclibc's UCLIBC_EXTRA_CFLAGS to avoid breakish CFLAGS leaking in, a
good example being -mthumb for ARM.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Without this escaping, the evaluation of HOST_MAKE_ENV and
TARGET_MAKE_ENV is done when the AUTOTARGETS_INNER macro is defined,
not when it is instantiated by the various packages. The result is
that the $(PKG_CONFIG_HOST_BINARY) variable, used in $(HOST_MAKE_ENV)
gets expanded before it is defined.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Our default mdev.conf file in package/busybox has lines like:
pcm.* root:audio 660 =snd/
event[0-9]+ root:root 640 =input/
that are used to create the device is the appropriate /dev
subdirectory. However, this feature requires
CONFIG_FEATURE_MDEV_RENAME to be enabled, otherwise mdev complains
with:
mdev: bad line 25
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libmbus is an open source M-bus (Meter-Bus) library.
The Meter-Bus is a standard for reading out meter data from electricity
meters, heat meters, gas meters, etc.
[Peter: minor whitespace fixes]
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Reviewed-by: Luca Ceresoli<luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
After bumping to 3.7.0, the valgrind-3.6.1-configure-support-linux-3.patch is
no longer necessary since it was added upstream. The
valgrind-3.7.0-compiler-check.patch patch is added to fix a compiler version
check issue (patch taken from the upstream Subversion repository). The
valgrind-3.7.0-fix-ccache-support.patch is added to fix the build process when
ccache is used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Even though it's most commonly used on desktops, this piece of software
also works well on embedded devices.
The package file only resolved mandatory dependencies. Things like
iptables and dnsmasq are only required if 'shared' connections are used,
and have hence not been made hard prerequisites.
There are probably too many i18n related files installed to the target.
That might need some more tweaking.
[Peter: fix Kconfig dependencies, add execinfo patch, fix libgcrypt-config
path, uClibc build fix]
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The CPPFLAGS have to be augmented, so configure finds the correct include
dir, and the patch needs to be tweaked to make the binary link to
libnl-3 instead of libnl-gen.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The current git version copes well with libnl-3, so use this one until
the next official release is made.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The CFLAGS have to be augmented for the include dir and a small patch
will make the binary link to libnl-3 and libnl-genl-3 instead of libnl
and libnl-gen.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The CFLAGS have to be augmented for the include dir and a small patch
will make the binary link to libnl-3 and libnl-genl-3 instead of libnl
and libnl-gen.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This newer version splits the library code into libnl, libnl-route,
libnl-genl and libnl-nf, each individually selectable via pkgconfig.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When built with --enable-xprint, xman needs libXaw8 (rather than libXaw7),
which we don't have in buildroot.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is a library for sending email through SMTP.
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
