Use unknown for the vendor part of the tuple, and add $arch-linux- symlinks,
similar to how it's done for the internal toolchain, rather than using
buildroot_ctng and unknown symlinks.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3103
gcc/gmp/mpfr/mpc are only needed when using an internal buildroot toolchain,
so only add them to HOST_SOURCE then.
Otherwise we get some nasty fetch error when doing "make source"
[Peter: add gmpc/mpfr/mpc and reword commit text]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some packages need to know whether the MMU is in play, so add a toolchain
option to expose the feature to them.
[Peter: only show option on archs where it makes sense]
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
WITH_TARGET_{GMP/MPC/MPFR} is unneeded since we are providing a sysroot.
It also breaks build-gcc under certain conditions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We want to keep a copy around for the future SDK functionality.
Also it's a better fix for bug #1051.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Convert binutils to a proper autotargets package
* Add version 2.21 and drop version 2.17
* Hook up packaged binutils for target gcc
* Build tools are on HOST_DIR now so change it
* Move cross/host gcc to HOST_DIR
* Drop kludge from commit 3c77bab2ee
This is fixed in the next commit "gcc: install copies of libgcc,
libstdc++ and libgcj to the sysroot" - tested for arm & x86_64
targets.
* TARGET_CROSS now pointed to HOST_DIR too
[Peter: Config.in tweaks]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reset them early in top-level Makefile to ensure they're keept unset
all the way through the build process.
This also removes the requirement of these variables being unset
globally prior the build.
Signed-off-by: Daniel Nyström <daniel.nystrom@timeterminal.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It's really not very useful, all it does is install a target
strace and ldd in a target_utils directory in staging.
While at it clean up the strace makefile a bit.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* 0.9.32 config needs UCLIBC_HAS___PROGNAME defined or we stall when
program invocation name is enabled.
* Mirror 0.9.32's config to snapshot for consistency.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Move uclibc host tools (ldd/ldconfig) to host dir.
They were previously installed in the staging dir.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Convert sstrip to a proper gentargets package
* Use openwrt svn version, it's basically the same one we used
* Change the hooks from old toolchain/sstrip to new package/sstrip
* Drop the old toolchain/sstrip directory
* sstrip for the target is now in Package -> Development
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Convert mpc to a proper autotargets package
* Hook it up for binutils/gcc to use
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Convert mpfr to a proper autotargets package
* Bump to version 3.0.0-p8
* Hook it up for binutils/gcc to use
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Convert gmp to a proper autotargets package
* Bump to version 5.0.1
* Hook it up for binutils/gcc to use
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of having to require svn, git or bzr unconditionally, only
require them when one package needs them to be downloaded.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In e6633fd2e3 I did crap, and added a
quietization inside a shell command, which was already quietized. This
was stupid, and is fixed by this patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In the support of custom external toolchains, we forgot to touch the
$(STAMP_DIR)/ext-toolchain-checked stamp file, which means that the
toolchain was re-checked and re-installed at everyt build.
At the same time, quietize a bit other stamp files touch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ARCH_SUBDIR is a shell variable, so it should be referenced with
$${ARCH_SUBDIR}. Without this, no symbolic link is created, and the
external toolchain fails to work if the non-default multilib variant
is used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
unzip is needed to uncompress at91bootstrap, so let's add it as a
dependency. This can be discussed, and if we think it shouldn't be a
new dependency, we can also build a host-unzip.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
By default, Crosstool-NG hides all the details of the toolchain build
process. However, this is inconsistent with the typical Buildroot
build, and the rotating progress thing makes log file resulting from
redirecting the Buildroot output a bit unusable. Therefore, switch the
Crosstool-NG configuration to a more verbose default.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
BR2_NEEDS_GETTEXT was already set to y for Buildroot internal
toolchain and external toolchains based on uClibc, but wasn't set for
toolchains based on uClibC built by the Crosstool-NG backend.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libgomp needs thread support on the target to build properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When an external toolchain is used, the user is responsible for
telling Buildroot what the configuration of the toolchain is. In order
to make sure that the selection is correct, we already perform checks
against the configuration of the uClibc in the selected external
toolchain. This commit adds the check for thread support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The selection of linuxthreads, linuxthreads old or NPTL doesn't make a
lot of sense for external toolchains. So, instead, we :
* Introduce an hidden BR2_TOOLCHAIN_HAS_THREADS option, which must be
selected by toolchain specific options when thread support is
available. Package needing to test thread support should use this
option.
* Move the none/linuxthreads/linuxthreads old/NPTL selection to
Buildroot internal toolchain configuration.
* Add an option in external toolchain to tell if thread support is
available or not in the external toolchain. We assume that glibc
without threads is not possible, as Ulrich Drepper said in
http://sourceware.org/ml/libc-alpha/2005-08/msg00091.html
ffmpeg, dmalloc and openvpn are fixed to use the new
BR2_TOOLCHAIN_HAS_THREADS option. For openvpn, --enable-threads=posix
is no longer used, as the configure script doesn't even understand
this option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_USE_SSP option is only used inside the uClibc build, so only
meaningful for Buildroot internal toolchains. Therefore, the option is
moved to the right location so that it isn't visible when working with
external toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of having BR2_GCC_CROSS_CXX and BR2_INSTALL_LIBSTDCPP, with
BR2_GCC_CROSS_CXX not being visible (and therefore being useless),
let's just keep BR2_INSTALL_LIBSTDCPP to enable C++ in the toolchain
and install C++ libraries on the target.
We also take that opportunity to make BR2_INSTALL_LIBSTDCPP an hidden
option, which is selected by an option in Buildroot toolchain support
or an option in External toolchain support, just as we did for other
toolchain features.
Some work definitely remains to be done :
- The name BR2_INSTALL_LIBSTDCPP is ugly, but we keep it for the
moment in order to avoid changing all packages.
- We should clarify the other language-related options (Fortran,
Java, Objective-C, etc.).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We already handle the stripping of libraries in $(TARGET_DIR) at the
global level, so there's no need to have toolchain-specific option and
code for this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of letting the user define all the details of his external
toolchain, we define a set of profiles for well-known external
toolchains (CodeSourcery ones only at the moment, can easily be
extended with other toolchains).
Once a profile has been choosen, the user is offered the choice of
either letting Buildroot download and install the external toolchain,
or (as before) to tell Buildroot where the toolchain is installed on
the system.
We of course provide a "custom profile", through which the user can
configure Buildroot to use a custom external toolchain for which no
profile is available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some helpers had their final line ending with a semi-colon, some did
not. For consistency, remove the final semi-colon from all helpers,
it's the responsability of the caller to add the final semi-colon as
needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Turn BR2_LARGEFILE, BR2_INET_IPV6, BR2_INET_RPC, BR2_USE_WCHAR,
BR2_ENABLE_LOCALE and BR2_PROGRAM_INVOCATION into hidden options.
Then, for Buildroot toolchains, external toolchains and Crosstool-NG
toolchains, provide visible options that selects the hidden options.
This allows :
* To show a different label and help text in the case of Buildroot
toolchain (do you want to enable feature X ?) and in the case of
external toolchain (is feature X available in your toolchain ?)
* To not show any option when a glibc external toolchain is selected
(since glibc is assumed to support all of largefile, IPv6, RPC,
WCHAR, locale and program invocation) and have them all selected in
that case.
There is some amount of duplication between Buildroot toolchain config
options and Crosstool-NG toolchain config options, because kconfig
doesn't allow to source the same Config.in file twice (even if under
mutually exclusive conditions). This duplication is more readable that
the hack that consists in splitting files in multiple pieces.
However, this commit changes the name of the options visible in the
configuration interface, so existing .config files will have to be
updated accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Old-style kernel headers got removed almost 2 years ago, so get rid of
the seperate kernel-headers-new.makefile file and move the content
to the main kernel-headers.mk.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is needed when custom/snapshot kernel headers are selected.
Buildroot expects to find dl/linux-2.6.tar.bz2 and also expects
it to extract to output/toolchain/linux-2.6, but if you tar
custom kernel sources directory can be anything, etc. linux-git.
In that case buildroot would extract it to output/toolchain/linux-git.
So fix this behaviour, by using tar strip-directory/component.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* ccache is now a normal package (both for the host and the target).
* ccache option is now part of the "Build options" menu. It will
automatically build ccache for the host before building anything,
and will use it to cache builds for both host compilations and
target compilations.
* bump ccache to 3.1.3
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Push the RPC option down to uClibc config
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
