Commit Graph

44 Commits

Author SHA1 Message Date
Christophe Vu-Brugier
aef5063f83 systemd: downgrade kernel headers minimum version to 3.7
The kernel headers minimum version for systemd was bumped to 3.8
(IFLA_GRE_FLOWINFO and IFLA_IPTUN_FLAGS definitions) and then to 3.10
(IFLA_VLAN_PROTOCOL definition). However, systemd since version v215
contains the following patch that defines IFLA_* constants if
needed:

  81577dc missing.h: add various network enums
  http://cgit.freedesktop.org/systemd/systemd/commit/?id=81577dc

As a consequence, this patch downgrades the kernel headers minimum
version to linux 3.7 which is required for BPF_XOR.

Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-10-30 19:04:45 +01:00
Yann E. MORIN
02e5cef14c system: add option to choose what /bin/sh points to
Not all our shells do install a pointer to /bin/sh. Besides, between
those that do and multiple ones are enabled, the last one to install
wins the the symlink.

Add a new config choice in the system sub-menu that allows the user to
explicitly select the shell to provide /bin/sh. If busybox is not
enabled, default to using dash, a POSIX shell.

Remove the symlink creation from bash.mk at the same time.

Note: for every shell, we select them, except busybox, on which we
depend, on the assumption that we do not want to force busybox in case
the user decided not to enable it.

[Peter: remove redundant !BR2_PACKAGE_BUSYBOX dependency]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-10-12 15:51:38 +02:00
Danomi Manchego
4952dddbf9 system: move tz setup outside of default skeleton clause
Allow time zone setup and installation for configurations
using custom skeletons as well as default skeletons.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-07-27 22:37:16 +02:00
Eric Le Bihan
c2277c2d4e systemd: needs kernel headers >= 3.10
Systemd needs a toolchain with kernel headers >= 3.10, as it needs
IFLA_VLAN_PROTOCOL from linux/if_link.h.

Fixes: http://autobuild.buildroot.net/results/33e/33e1447949d13bccc4076b69f902432e2131cc1c

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-13 22:32:37 +02:00
Simon Dawson
0be303cacc replace references to Busybox with BusyBox
The correct capitalised form appears to be "BusyBox" rather than "Busybox";
fix all references to the latter form. (Most such references occur in the
manual and in commentary in package makefiles.)

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-01 23:58:43 +02:00
Thomas De Schampheleire
4e5515382d system/Config.in: fix custom skeleton help text
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-02 09:25:02 +02:00
Ryan Barnett
5f71cc90d6 system: fix spelling errors
Fix minor spelling errors that exists in system/Config.in

Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-02 09:24:45 +02:00
Eric Le Bihan
b019490adf system: add ability to pass additional users tables.
A new entry has been added to the "System Configuration" menu to allow
the user to set the location of additional user tables (besides the ones
defined in packages).

A user table is a text file, formatted using the mkusers syntax, which
describes the users on the target system, with their UID/GID, home
directory, password, etc.

The target root file system will be populated according the content of
these files.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[yann.morin.1998@free.fr: use plural TABLES; we need to remove the
    intermediate users_table file, as it is no longer generated in
    one shot, in case a previous run failed and did not remove it]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-04-21 14:07:31 +02:00
Yann E. MORIN
337fbd549c system: allow setting the local timezone for uClibc
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-04-09 00:33:32 +02:00
Yann E. MORIN
3f595cde97 system: add selection of a default localtime
[Peter: strip quotes/use local TZDATA_LOCALTIME variable]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[alexandre.belloni: move from "tzdata" to "system configuration"]
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[yann.morin.1998@free.fr: move into the BR2_TARGET_TZ_INFO conditionnal block]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-04-08 23:56:19 +02:00
Yann E. MORIN
d6a37917dd system: make the zoneinfo list a system option
[Peter: move legacy options under 2014.05]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-04-08 23:33:24 +02:00
Eric Le Bihan
6dc3b6dd09 systemd: needs kernel headers >= 3.8
Systemd needs Linux headers >= 3.8 because it uses IFLA_GRE_FLOWINFO,
IFLA_IPTUN_FLAGS from linux/if_tunnel.h.

Fixes http://autobuild.buildroot.org/results/ad3/ad3b4003dc50582a493f1156234d83652104a6bf/

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-04-03 20:20:23 +02:00
Eric Le Bihan
db7ad00586 systemd: enable build for supported architectures.
Systemd only supports the architectures defined in
src/shared/architecture.h. So via a new parameter named
BR2_PACKAGE_SYSTEMD_ARCH_SUPPORTS, we enable the build of this package
only for those architectures.

Fixes http://autobuild.buildroot.net/results/bcc/bcce95eb0748505c0d62db21a6e420aae3c3181b/

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-03-29 10:22:52 +01:00
Eric Le Bihan
2494646744 systemd: needs kernel headers >= 3.0
Systemd requires at least Linux headers 3.0 because it uses:

- setns(2) syscall, introduced in 3.0.
- IFLA_GROUP from if_link.h, introduced in 2.6.39.

Fixes http://autobuild.buildroot.net/results/098/09866da023d527b3c228a98f1fde104e780e1883/

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-03-24 15:26:38 +01:00
Peter Korsgaard
b108fdcb83 Merge branch 'next'
Conflicts:
	Makefile
	package/dmraid/Config.in
	package/gdb/Config.in.host
	package/linux-headers/linux-headers.mk
	package/python/python.mk
	package/python3/python3.mk
	package/rt-tests/Config.in
	package/sdl/sdl.mk
	package/systemd/systemd-01-fix-getty-unit.patch
	package/systemd/systemd-02-fix-page-size.patch
	package/systemd/systemd-03-uclibc-fix.patch
	package/udev/Config.in
	package/udisks/Config.in
	package/vlc/vlc.mk
	system/Config.in

Quite some merge conflicts, hopefully I didn't screw up anything.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-02-28 14:30:23 +01:00
Thomas Petazzoni
a8da3cd61a util-linux: libblkid needs fork(), disable on !MMU
The libblkid library in util-linux uses fork. While it seems
potentially possible to disable the parts of the library that use fork
(the only parts using fork are parts related to LVM and Device Mapper,
which are said to be legacy as they are replaced by sysfs based
scanning, instead of having to fork to run a separate process).

However, since libblkid is used by:

 - e2fsprogs, which uses lots of fork all over the place
 - udev, which most likely will also need fork

There is not much point in making libblkid fork-less. As a
consequence, this commit makes util-linux/libblkid unavailable on
non-MMU architectures, and propagates the relevant dependency to the
reverse dependencies of libblkid.

This fixes the e2fsprogs build failure seen on Blackfin. The failure
was due to a configure test of e2fsprogs which was trying to link a
small test program against libblkid, which failed because there was an
undefined reference to fork() in the libblkid code.

Fixes:

  http://autobuild.buildroot.net/results/ee2c1568d16ac040011dd4d6d8b543ff9e9e2622/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-02-24 09:01:05 +01:00
eric.le.bihan.dev@free.fr
2c66e4429d systemd: bump to v207
This patch bumps systemd to v207 but also declares it as a provider for the
udev virtual package.

Starting with systemd 183, udev has been merged into
systemd. The udev daemon is now installed as /lib/systemd/systemd-udevd.
This means that /dev management using udev is only available if systemd
is chosen as init system.

When configuring systemd, the following options are available:

- activation of systemd-journal-gatewayd, to access the journal via
  HTTP.
- activation of extra features like journal compression and sealing.

Support for uClibc has also been removed because:

- upstream has no interest in supporting uClibc.
- using a shrinked libc brings no advantage, given the size of all the
  programs included in Systemd. So using glibc does not matter.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-02-12 22:14:36 +01:00
eric.le.bihan.dev@free.fr
fabcb119b9 udev: convert to virtual package
This patch converts udev to a virtual package. For the moment, there is only
one provider for the udev features: eudev.

Packages meant to provide udev-like features must select the symbol
BR2_PACKAGE_HAS_UDEV.

Packages depending on BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV or
BR2_PACKAGE_UDEV have been converted to use the new symbol.

[Peter: move legacy symbols under 2014.05]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-02-12 22:14:19 +01:00
eric.le.bihan.dev@free.fr
937a95449e eudev: new package
eudev is a userspace device management daemon. It is a standalone
version, independent from systemd. It is a fork maintained by Gentoo.

Features:

 - No extra configuration options are available: Gudev is build if
   libglib2 is selected.
 - No dependency on hwdata as the package uses its own hardware
   database (as does systemd).

eudev 1.3 is in sync with systemd v207.

[Peter: add BR2_USE_MMU dependency]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-02-12 22:14:16 +01:00
Peter Korsgaard
cac4fe50a4 system: fix kconfig warning about BR2_PACKAGE_SYSVINIT
Fixes:

warning: (BR2_INIT_SYSV) selects BR2_PACKAGE_SYSVINIT which has unmet direct
dependencies (BR2_PACKAGE_BUSYBOX_SHOW_OTHERS && BR2_INIT_SYSV)

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-01-13 23:31:20 +01:00
Sagaert Johan
dec1a14687 system: clarify issue/hostname settings
A custom skeleton may include /etc/issue and/or /etc/hostname, in
which case we do not want to override them.

But those files could also be missing from the custom skeleton, or
the user may want to override their content.

Update the documentation to make it clear that the user can set these to the
empty string to make buildroot not create/overwrite these files.

[Peter: drop the different default values depending on skeleton]
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
[yann.morin.1998@free.fr: change from hiding it behind SKELETON_DEFAULT
    to use conditional default values; move below the skeleton choice;
    improve help entries]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-01-10 15:37:37 +01:00
Simon Dawson
3fe55b1a2b udev: disable on avr32
udev requires the epoll_create1 system call, which is not available on avr32.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2013-12-05 11:17:29 +01:00
Thomas De Schampheleire
bed4e27868 Config.in files: whitespace cleanup
This patch fixes the following whitespace problems in Config.in files:
- trailing whitespace
- spaces instead of tabs for indentation
- help text not indented with tab + 2 spaces

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2013-11-11 22:19:30 +01:00
eric.le.bihan.dev@free.fr
0b90a82cda system: move init system option above /dev management.
The option to choose init system was below the one for /dev management.
As Systemd forces the use of udev, it is logical to swap them.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2013-11-11 01:28:10 +01:00
Thomas De Schampheleire
be084204eb Config.in files: add missing dependencies to toolchain option comments
When a package A depends on config option B and toolchain option C, then
the comment that is given when C is not fulfilled should also depend on B.
For example:

config BR2_PACKAGE_A
	depends on BR2_B
	depends on BR2_LARGEFILE
	depends on BR2_WCHAR

comment "A needs a toolchain w/ largefile, wchar"
	depends on !BR2_LARGEFILE || !BR2_WCHAR

This comment should actually be:

comment "A needs a toolchain w/ largefile, wchar"
	depends on BR2_B
	depends on !BR2_LARGEFILE || !BR2_WCHAR

or if possible (typically when B is a package config option declared in that
same Config.in file):

if BR2_B

comment "A needs a toolchain w/ largefile, wchar"
	depends on !BR2_LARGEFILE || !BR2_WCHAR

[other config options depending on B]

endif

Otherwise, the comment would be visible even though the other dependencies
are not met.

This patch adds such missing dependencies, and changes existing such
dependencies from
  depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
  depends on BR2_BASE_DEP
  depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
 (untested)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2013-11-10 23:59:57 +01:00
Thomas De Schampheleire
66bb10b7b0 Config.in files: unify comments of toolchain option dependencies
This patch lines up the comments in Config.in files that clarify which
toolchain options the package depends on.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2013-10-14 22:45:57 +02:00
Peter Korsgaard
7f1f9185e7 system: default to devtmpfs for /dev
As discussed on the list, devtmpfs is quite a bit nicer default than
the old static /dev, so change it.

Notice that you NEED to enable CONFIG_DEVTMPFS / CONFIG_DEVTMPFS_MOUNT
in the kernel configuration if you manually build a kernel outside
buildroot, otherwise the rootfs won't work.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-09-15 22:43:39 +02:00
Assaf Inbal
a68a51257e getty: add the ability to pass options to getty
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-09-15 22:17:53 +02:00
Assaf Inbal
ed6912e87d getty: Create specific getty config + cleanups
This commit introduces a specific BR2_TARGET_GENERIC_GETTY configuration flag.
This eliminates the need for checking if BR2_TARGET_GENERIC_GETTY_PORT is an
empty string or not. It also allows hiding various getty options when getty
isn't enabled.

Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-09-15 22:15:59 +02:00
Thomas Petazzoni
b7c0041c31 kmod: does not support static builds
Since kmod 14, the support for building a static library has been
removed completely from kmod. Therefore, we mark kmod as
!BR2_PREFER_STATIC_LIB, as well as all its reverse dependencies, which
includes the option to use the "udev" /dev management method.

[Peter: show comment for udev when BR2_PREFER_STATIC_LIB is enabled]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-09-02 23:22:14 +02:00
Yann E. MORIN
f1f97b3a05 system: add option to pass extra args to post-build and post-image scripts
It can be useful to have different configuration use the same post-build
and/or post-image scripts as they share a common infrastructure, but yet
have minor differentiation.

This option allows passing zero or more additional arguments to each
post-build or post-image script.

The same set of extra arguments are passed to all scripts, it is not
possible to pass different arguments to each script.

[Peter: fix help text, post-image gets called with the images dir]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-07-10 08:52:21 +02:00
Thomas Petazzoni
beea18a4d8 system: remove trailing tabs in Config.in file
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-04-29 22:56:57 +02:00
Thomas Petazzoni
c482eed74c Adjust prompt for the post-build scripts option
Since the post-image config option uses the plural for "Custom
scripts", do the same for the post-build config option, for
consistency.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-02-08 22:06:50 +01:00
Thomas Petazzoni
9fa32ba0b7 Add a post-image script mechanism
Just like we have a post-build script mechanism that gets executed
after the build of all packages but before the creation of the
filesystem images, let's introduce a post-image script mechanism, that
gets executed once all filesystem images have been generated.

This can for example be used to call a tool building a firmware image
from different images generated by Buildroot, or automatically extract
the tarball root filesystem image into some location exported by NFS,
or any other custom action.

[Peter: fix image script check]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-02-08 21:46:13 +01:00
Arnout Vandecappelle (Essensium/Mind)
7f86089292 target/generic: add filesystem overlay option
The filesystem overlay is a tree that is copied over the target fs
after building everything - which is currently usually done in the
post-build script.

[Peter: don't ignore missing directories]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-02-05 21:35:33 +01:00
Yann E. MORIN
72defc45dd target: add different methods to encode passwords
Passwords can be encoded in different ways (from the weakest
to the strongest): des, md5, sha-256, sha-512

Add a choice entry to select the method, defaulting to 'md5'.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-01-06 21:52:18 +01:00
Yann E. MORIN
b98b191b5c system: set root password only for default skeleton
In case one is using a custom skeleton, the root pasword might already be
set in this case, and should not be overriden.

Just ask for (and set) the root password only for the default skeleton.

Reported-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-01-06 21:46:47 +01:00
Peter Korsgaard
2bb2e62a4b system: TARGET_GENERIC_GETTY: allow it to be disabled
For some systems, you don't want to run any getty, so allow the option
to be disabled when the empty string is used.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-01-04 21:39:05 +01:00
Yann E. MORIN
a45871bfc6 target: add option to set the root password
Add an option in the menuconfig to specify a root password.

If set to empty, no root password is created; otherwise, the password is
encrypted using MD5 (MD5 is not the default for crypt(3), DES-56 is, but
MD5 is widely available, not-so-strong, but not-so-weak either).

Add a check for 'mkpasswd' as a new dependency.

[Peter: fix typo/capitilization and simplify logic]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-12-30 18:00:16 +01:00
Richard Braun
a0df7e1f0b system: add option to configure TERM variable
This option is useful for cases where the terminal isn't a bare serial
vt100, but e.g. a linux tty with more features.

Signed-off-by: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-12-16 01:01:14 +01:00
Thomas Petazzoni
3845a93b30 dbus: uses fork(), requires MMU
In order to solve
http://autobuild.buildroot.org/results/34f6843137efda20626af72714c110280ec577d7/build-end.log,
this patch makes the D-Bus package as well as all the packages that
select the D-Bus package 'depends on BR2_USE_MMU'.

In addition, for the specific case of gvfs, the missing
BR2_TOOLCHAIN_HAS_THREADS dependency is added (threads are required by
D-Bus, so they are also required by gvfs which selects D-Bus).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-11-17 23:49:26 +01:00
Philippe Reynes
dbf4978e6b Allow to run severals post build scripts instead of only one
Using severals post build scripts is usefull to share
script between severals boards/projects.

[Peter: fix trailing spaces in Config.in]
Signed-off-by: Philippe Reynes <philippe.reynes@sagemcom.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-11-17 17:23:59 +01:00
Peter Korsgaard
9d8dd5ee62 system: fixup default device table locations after system/ got added
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-11-04 13:00:25 +01:00
Thomas Petazzoni
6c3e3ad419 New top-level directory: system
This directory groups the following elements:
 * the default root filesystem skeleton
 * the default device tables
 * the Config.in options for system configuration (UART port for
   getty, system hostname, etc.)
 * the make rules to apply the system configuration options

Even though the skeleton and device tables could have lived in fs/, it
would have been strange to have the UART, system hostname and other
related options into fs/. A new system/ directory makes more sense.

As a consequence, this patch also removes target/Makefile.in, which
has become useless in the process.

[Peter: fixup TARGET_SKELETON settings / documentation to match]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-11-04 12:51:08 +01:00