It needs dlopen(), otherwise it will fail at the configure phase with a
message like this one:
checking for dlopen in -ldl... no
configure: error: dynamic linking loader is required
Fixes:
http://autobuild.buildroot.net/results/647/64742a1d3a07f86a7c801da5ef30892c1f760031/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- upstream fixed the fminf build error, use the backported patch now
- renamed patch according to new naming convention
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The aim of this patch is to fix bug #7574, i.e fix the static linking
of the quota package. It does so by introducing a patch to the quota
build system that generalizes the use of $(LIBS), and then changes
quota.mk to use LIBS instead of LDFLAGS to link against intl and tirpc
when needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The dependency on util-linux is only present in Config.in, and not in
quota.mk, and quota indeed builds properly without util-linux. It
could be a runtime dependency, but there is no indication that it is
the case, and I don't see why quota would run-time depend on
util-linux utilities.
Looking back at when the quota package was introduced, in one of the
preliminary patch, he following explanation was given by the original
author:
[Update: I added check for util-linux mount because
it support usrquota and grpquota mount options.]
But I still don't see why usrquota and grpquota mount options would be
the source of a dependency of the quota utilities on util-linux. Here
is what the util-linux mount man page says about those two mount
options:
grpquota|noquota|quota|usrquota
These options are accepted but ignored. (However, quota
utilities may react to such strings in /etc/fstab.)
So indeed, the quota tools will look at /proc/mounts and see if those
options are used for certain mount points, but that doesn't create a
dependency of quota on util-linux.
Therefore, this commit gets rid of the dependency of quota on
util-linux. It allows to re-enable quota on Microblaze, since this
dependency was inherited from util-linux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As a preparation to the introduction of an additional patch to quota,
let's rename the existing patch to the new naming convention.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- examples/server was renamed examples/web_server
- patch was submitted and included upstream so we can drop it
Signed-off-by: Davide Viti <zinosat@tiscali.it>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make all the example as a space separated list.
The definition of the different type was modified to look like the same
section on the manual.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix indent for LIBFOO_USERS and LIBFOO_PERMISSIONS as per the manual example.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The previous releases was removed from their servers has they did a
releases from a wrong tag, the resulting binary was wrong.
Thanks to "Yann E. Morin" for spotting that.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: "Yann E. Morin" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
superres module fails to compile with the following error messages:
[100%] Building CXX object
modules/superres/CMakeFiles/opencv_superres.dir/src/super_resolution.cpp.o
/opencv-2.4.10/modules/superres/src/frame_source.cpp: In function
'cv::Ptr<cv::superres::FrameSource>
cv::superres::createFrameSource_Video_GPU(const string&)':
/opencv-2.4.10/modules/superres/src/frame_source.cpp:263:16: error:
expected type-specifier before 'VideoFrameSource'
/opencv-2.4.10/modules/superres/src/frame_source.cpp:263:16: error:
could not convert '(int*)operator new(4ul)' from 'int*' to
'cv::Ptr<cv::superres::FrameSource>'
/opencv-2.4.10/modules/superres/src/frame_source.cpp:263:16: error:
expected ';' before 'VideoFrameSource'
/opencv-2.4.10/modules/superres/src/frame_source.cpp:263:41: error:
'VideoFrameSource' was not declared in this scope
/opencv-2.4.10/modules/superres/src/frame_source.cpp:264:1: error:
control reaches end of non-void function [-Werror=return-type]
cc1plus: some warnings being treated as errors
make[3]: ***
[modules/superres/CMakeFiles/opencv_superres.dir/src/frame_source.cpp.o]
Error 1
make[3]: *** Waiting for unfinished jobs....
This is caused because the return value of the
createFrameSource_Video_GPU function should be a VideoFrameSource_GPU
object.
Backporting an upstream patch to fix this problem in Buildroot:
2e393ab833
Fixes:
http://autobuild.buildroot.net/results/b09/b0996267197a9016d29d6070804ebc0cb7853548/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Backporting an upstream patch to fix a failure when doing a static
build:
/br/output/host/usr/bin/mipsel-ctng-linux-uclibc-gcc -shared -o
ld_iscsi.so ld_iscsi.o -ldl
/br/output/host/opt/ext-toolchain/bin/../lib/gcc/mipsel-ctng-linux-uclibc/4.8.2/../../../../mipsel-ctng-linux-uclibc/bin/ld:
ld_iscsi.o: relocation R_MIPS_HI16 against `__gnu_local_gp' can not be
used when making a shared object; recompile with -fPIC
ld_iscsi.o: could not read symbols: Bad value
collect2: error: ld returned 1 exit status
Upstream commit:
3d6c2be342
Fixes:
http://autobuild.buildroot.net/results/7a9/7a9caf1f4080c2c4b04ee3b13c1240f475a22ea7/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update package disabling (removing pkgs subdirectories) after
latest tcl version update:
$ ls tcl8.6.1/pkgs/
itcl4.0.0
sqlite3.8.0
tdbc1.0.0
tdbcmysql1.0.0
tdbcodbc1.0.0
tdbcpostgres1.0.0
tdbcsqlite3-1.0.0
thread2.7.0
$ ls tcl8.6.2/pkgs/
itcl4.0.1
sqlite3.8.6
tdbc1.0.1
tdbcmysql1.0.1
tdbcodbc1.0.1
tdbcpostgres1.0.1
tdbcsqlite3-1.0.1
thread2.7.1
Fixes:
http://autobuild.buildroot.net/results/07ae8e42acf62fef99de70c8099ec5a0ca89a817/
Could not reproduce the build failure, but disabling pkgs/sqlite3.8.6 should
prevent all build failures in this directory...
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cramfs.mk contains
CRAMFS_DEPENDENCIES = zlib
but this dependency was missing in Config.in.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Install a 'vi' symlink to win over busybox vi (more features) and in
case busybox isn't around, for people expecting plain simple 'vi' to
call the editor.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a small patch to re-enable arptables for static builds.
The dlfcn.h is a stray include for a past attempt at loadable plugins
but the code is disabled so there's no need for it.
Also add hash file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The logic was wrong.
Even though it was working for previous versions of QEMU, it changed in
later versions, and thus now breaks on the version we currently package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yay!
The release tarball allows us to drop sizable in-tree patches, so switch
to it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
musl doesn't implement re_match and friends and grep fails to
detect this properly, so force internal regex routines for musl.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
musl doesn't implement re_match and friends and coreutils fails to
detect this properly, so force internal regex routines for musl.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even when doing static builds, a shared library is built. This causes a
build failure under some circumstances, for instance when building for
MIPS + uClibc + static.
After asking upstream if it would be possible to add a configure option
to not build the shared library, the answer was that doing a static
build is not a good idea. Here is a small snippet of the conversation:
"Note that fully static builds are problematic. elfutils uses dlopen to
open the EBL backends (the CPU-specific support snippets), so even if
you link statically, the final binaries are still considerably dynamic."
Related:
https://lists.fedorahosted.org/pipermail/elfutils-devel/2014-November/004223.html
Fixes:
http://autobuild.buildroot.net/results/691/6913f5af6519463fbed39ef37b6a40ecf6a67b54/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the BR2_GCC_TARGET_TUNE value is always empty now, there is no
longer a point in using it in the gcc package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ffmpeg currently uses BR2_GCC_TARGET_TUNE as the --cpu option
value. However, there are multiple architectures for which
BR2_GCC_TARGET_TUNE is not used. After inspecting the ffmpeg configure
script, we concluded that using the BR2_GCC_TARGET_CPU value if
available, or the BR2_GCC_TARGET_ARCH value as a fallback was the
appropriate behavior.
This allows to remove the reference to BR2_GCC_TARGET_TUNE, which is
one step towards the removal of this option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
dhcpcd is using $(BR2_GCC_TARGET_ARCH) as the value of its --target
option. However, depending on the architecture, this value might be
empty.
After inspecting the dhcpcd configure script, it turns out that in
fact the --target option has the following semantic:
--target=TARGET configure for building compilers for TARGET [HOST]
So it is very much like the --target option of regular,
autoconf-based, configure scripts. Since dhcpcd is not a compiler,
passing --target is pointless. Moreover, as long as --os=linux is
passed, passing --host or --target is completely ignored by the
configure script.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libnspr --enable-thumb2 option was only enabled on Cortex-A8 and
Cortex-A9. This commit switches to using BR2_ARM_CPU_ARMV7A instead,
which will allow using Thumb2 for this package even with the other
Cortex-A cores.
[Peter: use BR2_ARM_CPU_HAS_THUMB2 instead]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of using the exhaustive list of Cortex-A ARM cores, use
BR2_ARM_CPU_ARMV7A instead. We also fix a wrong comment that said the
Valgrind package could only be selected for Cortex-A8 and Cortex-A9,
which was true a long time ago, but was no longer true since it was
also enabled for all the other Cortex-A platforms.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The webkit package is not available on ARM < v5, so this commit
switches to using the newly introduced BR2_ARM_CPU_ARM* options
instead of per ARM core options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The vo-aacenc package has an option to enable ARMv5 optimizations. It
was enabled based on per ARM core options, but now that we have per
ARM architecture options, this commit switches to using them.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
