This patch adds a new config option BR2_PRIMARY_SITE_ONLY that, when set,
restricts package downloads to the specified BR2_PRIMARY_SITE. If the package
is not present on the primary site, the download fails.
This is useful for project developers who want to ensure that the project can
be built even if the upstream tarball locations disappear.
[thomas.petazzoni@free-electrons.com:
Extend config option help message with more details coming from the
commit log. Added a dependency on the fact that a primary site has
been defined. Without any primary site (the default configuration),
this new option does not make any sense.]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This will allow to install binary package only if they are supported by the
host. As example Atmel SAM-BA (x86 only).
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When BR2_JLEVEL is 0, set PARALLEL_JOBS to double the number of CPUs
detected. This allows one to more or less fully utilize the host
system without manually tuning the configuration.
Also make 0 the default value for BR2_JLEVEL.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Sometimes it may be desirable to keep debug symbols for some binaries and
libraries on the target. This commit introduces the config option
BR2_STRIP_EXCLUDE_FILES, which is interpreted as a list of such binaries
and libraries, and the option BR2_STRIP_EXCLUDE_DIRS, which indicates
directories excluded from stripping entirely.
These exclusions are passed to the find command in the target-finalize step.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The existing ccache infrastructure sets the cache directory hardcoded in the
ccache binary. As this directory was set to ~/.buildroot-ccache, the cache
is not necessarily local (e.g. in corporate environments the home directories
may be mounted over NFS.)
Previous versions of buildroot did allow to set the cache directory, but this
was also hardcoded (so you had to rebuild ccache to change it), plus that
support was removed.
See http://lists.busybox.net/pipermail/buildroot/2011-July/044511.html for
a discussion on this.
This patch modifies ccache to respect a new shell variable (exported from
the Makefile, based on a configuration option) instead of CCACHE_DIR.
The name CCACHE_DIR itself is already used by autotargets for the ccache
package.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The help text for the choice of different stripping levels is removed,
since it is not displayed by menuconfig. Instead, only the per-option
help text is visible, so this text is improved.
[Peter: slightly reworked text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_ENABLE_DEBUG option selects the compilation and installation
of gdbserver on the target. This is a bit restrictive, especially for
external toolchains, which may already contain a gdbserver on the
target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This allows ccache to re-use its cache contents even if the compiler
binary mtime has changed. It is the simplest approach to solve this
problem, and it works for the internal, external and crosstool-ng
toolchain backends.
Of course, it leaves the user responsible for invalidating the cache
when necessary, but there doesn't seem to be a real good solution that
allows both to: 1/ keep the cache contents accross builds and re-use
it and 2/ invalidate the cache automatically when the compiler chances
in an incompatible way.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Most of the host packages don't have to be exposed to the user as they
are only used as build dependencies of target packages.
However, some host utilities, such as flashing utilities, image
creation programs, specific debuggers, might be useful and should be
presented to the user.
Therefore, we have a new global menu, which lists those host
utilities. These utilities are described in package/*/Config.in.host
files, which will be sourced by package/Config.in.host.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add support for packages stored in Mercurial (hg) repositories.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch adds support for scp:// both for use in the package Makefiles, as for
the BR2_PRIMARY_SITE variable.
This patch was based on the work of Richard Guy Briggs
(see https://bugs.busybox.net/show_bug.cgi?id=3343).
[Peter: small whitespace fixes]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This can be used this way :
<pkg>_VERSION = 42
<pkg>_SITE = file:///some/local/directory
<pkg>_SOURCE = mypkg-$(<pkg>_VERSION).tar.bz2
Can be useful to integrate a home-made project or for testing purposes.
The default command to retrieve files is 'cp' but 'rsync' could also be used.
Through sshfs, it should also be possible to get non-public remote files on a
ssh server.
[ Thomas Petazzoni: use $(PKG)_SITE and $(PKG)_SOURCE variables
instead of $(1) and $(2) ]
[ Peter: don't append $(QUIET), cp doesn't handle -q]
Signed-off-by: David Wagner <david.wagner@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The user can now create a custom local override file to override the
source directory for various packages.
An example override file:
ZLIB_OVERRIDE_SRCDIR = /tmp/zlib
STRACE_OVERRIDE_SRCDIR = /opt/strace-4.5.20
would tell Buildroot to use the zlib and strace source code from the
specified directories, instead of download, extracting and patching
the code has done usually by Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Allan W. Nielsen <a@awn.dk>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Easynews has been down for a number of days, and it is no longer in the
mirror list, so use the mirror from the University of Kent instead by
default.
At the same time fix the link to the sf mirror list.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The stripping options operate on the final image and not the intermediate
builds, so requiring stripping to be disabled just to enable debugging
options doesn't make much sense. Especially when working with gdbserver:
only the host needs the debugging information to be available. The board
can run & debug perfectly fine without it.
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Allow the user to define HOST_DIR in the config menu.
This way when building an internal toolchain a separate (maybe shared)
output directory may be defined and the toolchain can be used by
multiple users and/or projects.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Kconfig nowadays uses the mainmenu as the title, so add the version info
here, similar to how it is done in the Linux kernel.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Drop the BR2_STAGING_DIR option
* Hardcode STAGING_DIR to $(HOST_DIR)/usr/TUPLE/sysroot
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The options to customize the hostname, the banner and the serial port
configuration are now inside a menu named 'System configuration'.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We don't need Config.in and Makefile in target/device: defconfig files
are sufficient to describe the specificities of a board (architecture,
compilation flags, bootloader and kernel details, etc.).
However, a placeholder such as target/device will be kept in order to
host things such as kernel configuration files or various
board-specific patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Having Config.in.mirrors (which also to select various download sites)
inside target/device sounds strange. This commit moves the contents of
Config.in.mirrors directly into the main Config.in file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* ccache is now a normal package (both for the host and the target).
* ccache option is now part of the "Build options" menu. It will
automatically build ccache for the host before building anything,
and will use it to cache builds for both host compilations and
target compilations.
* bump ccache to 3.1.3
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The configuration cache shared between packages, while being in
principle a nice idea to speed-up the configuration of packages by
avoiding repetitive identical checks, turned out to be unreliable due
to the subtle differences between similar but not identical checks in
different packages. After spending some time trying to fix those, we
concluded that supporting the shared configuration cache is definitely
too hard and too unreliable, and that we'd better get rid of it
altogether.
This patch therefore removes the shared configuration cache
infrastructure and usage.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Wget's builtin default of 20 retries before the backup site is used is
pretty excessive when a server is down.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This re-instates writing the version string in .config headers, and no
longer provides it as a kconfig symbol in .config (it is now a variable
in the Makefile, and in the environment).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It's not really necessary to differenciate the commands for checking out
or updating a repository. Only the path to the binary and eventual
top-level flags are useful to configure.
Signed-off-by: Maxime Petazzoni <maxime.petazzoni@bulix.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reported-by: "James J. Dines" <jdines@jdines.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of asking the user about the GNU target suffix, just compute
it automatically from the other configuration options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
