Closes#3475
There's no real reason to sync after creating the device nodes,
and it slows down the file system image creating quite a lot on
busy systems, so get rid of it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3307
Synergy needs libXtst, a toolchain with wchar support and was missing
an include for exit().
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3277
Quagga's snmp support tries to link with libcrypto from openssl by
default.
That's a bad no no since snmp might have ssl support disabled
and openssl won't be around.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The makedevs script did not always generate the requested set of device names / minor number series.
* If start != 0, then requesting (count) devices would generate only (count - start)
* If start != 0 && increment != 1, then requesting minors starting with (minor) would generate minors starting with (minor + (start * (increment - 1)))
This patch fixes the code and updates the usage text with extra examples.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3205
OpenSSL's build system tries to be too wise for it's own good when
guessing what libdir should be.
This causes problems like the one reported in bug #3205 so just specify
libdir to point to /lib (since it's prefixed it would finally be
/usr/lib) since it should be present on 32 and 64 bit targets.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#2935
Add ntpdate option and make ntpd optional.
Based on incomplete patch by Frederik Pasch <fpasch@googlemail.com>
Also enable crypto when openssl is enabled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3169
Typo in modules_lib_dirs section of patch specified modules_include_dirs
instead of modules_lib_dirs. This matters if PYTHON_MODULES_LIB
is not passed into the script.
Signed-off-by: Mark Wickham <markw@digi.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3181
When install -D is used (to ensure destination dirs exists), the destination
file name has to be given as well.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3103
gcc/gmp/mpfr/mpc are only needed when using an internal buildroot toolchain,
so only add them to HOST_SOURCE then.
Otherwise we get some nasty fetch error when doing "make source"
[Peter: add gmpc/mpfr/mpc and reword commit text]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3109
Pass the correct -C <dir> option to make menuconfig.
Signed-off-by: Kim Jae-hui <twinkle.j4k@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3007
Changed the KEXEC_SITE to the new home of kexec. This patch also satisfies
bug #3007 created by me last month. Thanks to Gustavo for pointing out that
the easy fix was to bump kexec to 2.0.2.
Signed-of-by: Andy Kennedy <Andy.Kennedy@AdTran.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#2647
[Peter: Adjust for the real 12bit majors/20bit minors supported by Linux]
Signed-off-by: Matt Fleming <matthew.fleming@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#2929
Instead of just adding a fixed amount to the blocks used, try to
estimate the real space needed according to the filesystem structure
(bitmaps, inodes, blocks).
The side effect of this is that we no longer significantly overestimate
the size needed for small file systems.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#2371
Bug 2371 was a Qt compilation issue when MySQL support was enabled,
because the Qt configuration tests were looking at host MySQL
libraries.
Even though I couldn't reproduce the bug with MySQL libraries
installed on my host, there was clearly a problem since
-I/usr/include/mysql and -L/usr/lib/mysql were part of the compilation
flags when building those tests.
This was caused by the fact that /usr/bin/mysql_config was used
instead of $(STAGING_DIR)/usr/bin/mysql_config. We fix this by passing
the path to the correct mysql_config script using the -mysql_config Qt
./configure argument. Since this mysql_config script returns the
correct flags for libraries and headers path, the hardcoded -I and -L
flag in qt.mk are no longer needed.
With this in place, Qt is no longer compiled with -I/usr/include/mysql
and -L/usr/lib/mysql, which presumably should fix the problem reported
in bug 2371.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#2965
For some odd reason, xkeyboard-config < 1.8 was creating a symbolic
link from /usr/share/X11/xkb/xkbcomp to the xkbcomp binary. But in
cross-compilation mode, this is absurd as the xkbcomp binary to which
the link is pointing is the one in $(HOST_DIR).
This symbolic link thing has been removed completely starting from
xkeyboard-config 1.9. See
http://cgit.freedesktop.org/xkeyboard-config/commit/?id=f413dff57e77e7b01461508f74b4e92d1dc8defd.
Therefore, we simply bump xkeyboard-config to the latest available
version, 2.0.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As reported by Miroslav Ignjatovic in bug #2983, our hack in
xlib_libX11 to build makekeys for the host does not work, for several
reasons:
* As we are building a tool for the host, we shouldn't pass
-I$(STAGING_DIR)/usr/include, since the $(STAGING_DIR) contains
headers of packages for the target.
* Instead, we should use the headers in $(HOST_DIR)/usr/include. They
were not used due to a typo: $(HOST_CFLAGS) must be used instead of
$(HOSTCFLAGS).
* Finally, in order for makekeys to find the required headers in
$(HOST_DIR)/usr/include, we must depend on host-xproto_xproto.
This fixes bug #2983.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
l2tp is no longer being developed, and xl2tpd is forked from l2tpd and is
maintained by Xelerance Corporation.
[Peter: remove invalid pppd dependency]
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This allows to disable the build of the format specification
documentation, which was causing issues in cross-compiling mode.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Based on the conversion to gentargets done by Martin Banky, several
issues were fixed, and the mplayer package was improved:
* Updated to a recent SVN version
* Removed mandatory dependency on libmad
* The AVR32 specific patch has been removed. It was a pain to remain
blocked at the old 1.0-rc2 just for this patch. All this
optimization work should have been submitted upstream, Buildroot is
not the place to carry such heavy modifications.
* Options were added to select whether mplayer and/or mencoder should
be built/installed.
* Support for additional options if packages have been selected:
tremor, libmad, libtheora, libpng, jpeg, xlib_libX11,
xlib_libXv. More could be added in the future.
* Support for ARM-related optimization options. Similar improvements
could be done for x86 and PowerPC architectures.
[Peter: fix build with !IPV6]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[ Thomas: remove all patches, since they have been merged. Implement
the target uninstallation step, fix many issues. ]
[Peter: fix target install / uninstall steps]
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The package has been marked deprecated, is no longer developed
upstream, so let's get rid of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This package has been marked deprecated in Buildroot last year, no-one
complained, and it isn't developed upstream anymore. So get rid of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This package has been marked deprecated in October, and no-one
complained. Moreover, it doesn't sound like a package that is widely
used on embedded systems. So we get rid of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This package has been marked deprecated some time ago, because it has
been integrated into Busybox. Let's get rid of it now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also, memtester requires largefile support
[ Thomas: add patch to fix memtester's Makefile at installation
stage. Bump to 4.2.1. ]
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[ Thomas: simplifications and bump to 2.02.78 ]
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
lsof is packaged as a tarball inside a .tar.bz2 package, so we have a
post-extract hook to extract the source code tarball, so that for the
next steps, lsof looks like a normal package.
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also, changed the site to Debian, to get the latest patches
[ Thomas: add inittab compatible with sysvinit. Minor fixes. ]
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also, changed the site to Debian, to get the latest patches
[ Thomas: Minor fixes. Removed S25sysklogd since our default
/etc/inittab already starts klogd and sysklogd. ]
[Peter: only install syslog.conf if not available in skeleton]
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
