Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998 at free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ffmpeg does not understand the PKG_CONFIG env variable,
so it throws a line like this at the end of its configuration:
WARNING: .../output/host/usr/bin/arm-none-linux-gnueabi-pkg-config not found, library detection may fail.
Apparently, some of the indevs and outdevs need a pkg-config.
This patch adds the --pkg-config to let ffmpeg know where it
is.
[Thomas: remove unrelated formatting change.]
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rather than hard-code --disable-debug, selectively enable
or disable based on BR2_ENABLE_DEBUG.
(Similar to gst1-libav.)
[Thomas: do not make other changes such as reformatting the
--prefix=/usr line.]
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 62ab07ef76 added a bunch
of hard-coded options. Some of these options are then again
added (or negated) based on kconfig settings. This patch removes
the hard coded swscale and postproc settings, as they are enabled
or disabled later. It also moves the --disable-pic lower
as an else clause to the part that adds --enable-pic.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Starting with the 2.4.7 release, for V4L support, OpenCV does not
requires a libv4l dependency for its V4L support.
So, it now provides 2 distincts knobs for this: WITH_V4L and a new
one: WITH_LIBV4L.
This patch takes advantage of this new knob and libv4l support is
now automatically enabled only if the libv4l package is enabled.
In OpenCV, the logic behind this is:
- using libv4l if available,
- otherwise, use v4l2 or v4l API from the kernel if available.
[Thomas: remove gratuituous reformating, as suggested by Yann.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the bcache tools, required to setup the linux bcache
feature of the Linux kernel.
[Thomas: use only one hook to create the missing directories, as
suggested by Yann.]
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes
mipushpxl.c: In function 'miPushPixels':
mipushpxl.c:110:38: error: 'IMAGE_BYTE_ORDER' undeclared (first use in this function)
if (screenInfo.bitmapBitOrder == IMAGE_BYTE_ORDER)
Patch submitted upstream: https://bugs.freedesktop.org/show_bug.cgi?id=83582
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Portmap builds and links, however, does not get built correctly when
BR2_PREFER_STATIC_LIB is selected. There are no dynamic libraries in
rootfs.tar, however, portmap gets linked dynamically without regards to
the PREFER_STATIC_LIB tags. LDFLAGS was not being passed into the build of
portmap.
Signed-off-by: Andy Kennedy <andy.kennedy@adtran.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There has been no new release recently, and the 1.0 branch is out-dated.
The 1.1 branch has not been release-tagged since the last beta tag,
but it still continues to receive bug fixes, and is relatively stable.
The next major release should be 1.2.0, but it is still in beta, looks
like it is focused on Android, and was only recently tagged.
So, we use the latest cset from the 1.1 branch until there is a new
release (either 1.2.0 or 1.1.0), at which point we can revisit which
version we'll use.
Drop our patch, since the problem has been fixed upstream (with a more
complete solution.)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
genpart comes handy when there is a need to programatically generate
partition tables, without the need for a full partitioning program like
fdisk et al.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Erlang/OTP 17.3 is a service release on the 17 track with mostly bug
fixes, but it does contain a number of new features and characteristics
improvements as well.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tweak the prompt, because Xceive is now part of Cresta, so the
new xc5000c-based devices might be branded under either name.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
New firmware to support iwlwifi-7265. Only comes in rev-8 or rev-9
flavours, so hide rev-7 when iwlwifi-7265 is selected.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is an upcoming new firmware file for a new chipset supported by
iwlwifi, as well as a new revision of the iwlwifi firmware.
The patch only prepares the iwlwifi entries so it is easier to add them.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes build with musl libc.
[Thomas: use 004 sequence number instead of 005 for the patch.]
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: don't introduce a SWIG_MAJOR variable, not needed for the
bump.]
Signed-off-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Without this, including libstdc++'s <cstddef> fails.
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
I re-did the patches: one patch per change, patch configure.in instead
of the configure script itself, a few more issues fixed. This should
hopefully make the patches acceptable for upstream, or at least make it
easier to migrate them on version bumps.
This also fixes compilation with musl libc.
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Don't use hardening (SSP_CFLAGS & PIE_CFLAGS) flags on host tools since
the host compiler may differ wildly from the tests run on the cross
compiler and they might not work. Fixes:
http://autobuild.buildroot.net/results/b10/b1091bd04ab988744548b74fb48c64bf291fed2f/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We introduce the new "Audio" firmware category for the firmware.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix prompt at the same time.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
wl18xx are a familly of WLAN + BT chipsets.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
linux-firmware has gained a few firmware files for Broadcom WiFi
chipsets. Installing all of them takes a lot of place, when usually only
one is really needed.
Split the Broadcom BRCM drivers in two categories: bcm43xx and bcm43xxx,
when they were previously a single config option, so as to reclaim a bit
of space.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some updated firmwares files.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The copy_scripts() method in distutils copies the scripts listed
in the setup file and adjusts the first line to refer to the
current Python interpreter. When cross-compiling, this means that
the adjusted shebang refers to the host Python interpreter.
As a consequence, we add a patch for python and python3 that
force copy_scripts() to preserve the shebang when
cross-compilation is detected.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
targetcli-fb is a command-line interface for configuring the LIO
generic SCSI target, present in 3.x Linux kernel versions.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
configshell-fb is a Python library that provides a framework for
building simple but nice CLI-based applications.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
rtslib-fb is an object-based Python library for configuring the
LIO generic SCSI target, present in 3.x Linux kernel versions.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Urwid is a console user interface library for Python.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the kernel patch from:
http://patchwork.ozlabs.org/patch/384285/
There is no problem with latest gcc anymore.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>