Note: HarfBuzz is needed to build Pango. Configure does not return an
error if HarfBuzz is missing, but without HarfBuzz it can't enable any
backends.
Remove patch pango-no-const-return because it is applied upstream in
this version.
Signed-off-by: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove patch because it is applied upstream in this version.
Signed-off-by: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Set the default platform for gst-fsl-plugins, based on the one choosen
as the generic Freescale i.MX platform.
We can't use only this generic platform choice, as gst-fsl-plugins has
support for more platforms.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gary Bisson <bisson.gary@gmail.com>
Cc: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As the VPU code is now apart from imx-lib, this package also depends
on imx-vpu.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: slightly tweak commit log <80 chars]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package version is now independent from freescale-imx package.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package version is now independent from freescale-imx package.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libfslvpuwrapp versionning no longer follows the same version scheme
as the other Freescale components.
As VPU code is no longer in imx-lib, this package now depends on imx-vpu
package.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: expand commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As of 3.10.17-1.0.0 release, VPU code is now in its own package.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: slightly rework the kconfig comment; fold the
imx-vpu patches into this changeset; add one missing license file]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
[yann.morin.1998@free.fr: split from the previous patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
That way all the i.MX packages can inherit from that information,
for example, the soon-to-be-introduced imx-vpu package.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: the part about gpu-viv-bin-mx6q moved to
its own patch; rework the commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The include files from the FSL kernel are properly separated out in
uapi, so we must include that instead of the kernel-side headers.
imx-lib no longer includes VPU code and therefore is now free from
Freescale License. It is now LGPLv2.1+.
Also, it is now provided as a normal .tar.gz, so _SOURCE is no longer
needed. So, remove our custom _EXTRACT_CMDS.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: _SOURCE is no longer needed, rework commit
log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bumping the version requires some heavy changes in the different
i.MX related packages. Instead of having a single huge patch, those
changes are split in smaller patches, one per affected package.
This has the inconvenient side-effect of breaking the build right
now with the bump; but it is better since the patches are easier to
understand.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: expand commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: change license to be GPLv2. The header of makedevs.c is a bit
unclear, as it mentions both the GPL and LGPL. But since the code
seems to originally be coming from Busybox, assuming GPLv2 is the
safest option.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Because the configure stamp file depends on the rsync stamp file,
removing it by the "<pkg>-clean-for-rebuild" rule trigger the configure
step. To avoid triggering the configure step use an order-only dependency.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reported-by: Cédric Marie <cedric.marie@openmailbox.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
exim has lots of options configurable before the build process. It's not
useful to have all of them exposed in Buildroot, yet users may need to tweak
them.
Allow the user to pass an entire configuration file to make exim totally
reconfigurable without bloating the Buildroot menus.
[Thomas: remove "for exim" from Config.in options prompts.]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sensors-detect program is in fact a Perl script, so it won't run
on the target unless Perl is enabled in the configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
To know whether the libiconv library is available, lm-sensors is using
the host ldconfig, which is obviously wrong in cross-compilation.
Moreover, the lm-sensors program making use of the iconv_*() API
already does it when __UCLIBC__ is *not* defined. In this case, the
iconv_*() functions are already part of the C library, so there is no
need to link against a separate library. Therefore, this patch simply
removes the libiconv handling.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit adds a patch to lm-sensors to support a new variable
BUILD_SHARED_LIB that allows to conditionally enable or disable the
build (and usage) of the libsensors shared library.
It also refactors the make variables in a variable called
LM_SENSORS_MAKE_OPT.
Fixes:
http://autobuild.buildroot.org/results/06c/06c197263e4939d6adc4877e152f602a69df751d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Don't try to install ld* tools to staging when it's a static build,
there's no point and it'll be broken once we build a purely-static
uclibc.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link against libncurses instead of the legacy libcurses.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: wrap help text, add BR2_USE_MMU dependency, minor fixes in
.mk file.]
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds support for time.tzset() in Python 2.7 and Python 3.
The Python configure script sets ac_cv_working_tzset to 'no' when
cross compiling, although it should be available and work with all
toolchains supported by Buildroot (?).
The patch below pre-sets the variable so that time.tzset() works.
[Thomas: adjust commit log.]
Signed-off-by: Henry Margies <henry.margies@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libbz2.so was explicitly built for the host, but was not installed. Install it.
Signed-off-by: David Bachelart <david.bachelart@bbright.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The PyZMQ package is currently limited to Python 2; however, its
build system does not require the Python 2 interpreter and will work
as is with Python 3 (tested).
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After the following commits:
26974bf6a7 use default binutils for sh architecture
6f1cf344d9 binutils: Use the default version by default on MIPS
the 2.21.1 binutils version is no longer required, and since it's an
old version, we get rid of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following d4839ffcab ("binutils: remove
2.20.1, 2.21 and 2.23.1"), Config.in.host contains unneeded
definitions of BR2_BINUTILS_VERSION for no longer existing
versions. This patch fixes that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch removes the custom kconfig helpers UCLIBC_OPT_SET and
UCLIBC_OPT_UNSET with the common KCONFIG_SET_OPT, KCONFIG_ENABLE_OPT and
KCONFIG_DISABLE_OPT.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The echo statements in the kconfig helpers are currently using double
quotes. For KCONFIG_SET_OPT this is problematic when the value argument
itself contains a double quote (a string value). In this case, the statement
echo "$(1)=$(2)" >> $(3)
would become:
echo "FOO="string value"" >> /some/path/.config
resulting in the string
FOO=string value
in the config file, rather than the properly quoted
FOO="string value"
The linux package worked around this by escaping the quote characters, but
a prettier solution is to use single quoting in the helpers (or
alternatively use no quoting at all).
A side effect of this change is that a $variable in the key or value would
no longer be interpreted by the shell, removing any unexpected behavior.
This change is only really necessary for KCONFIG_SET_OPT, but for symmetry
reasons the other helpers are updated too.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When TARGET_LDFLAGS contains more than one option, the generated
Makefile contains this definition of LDDLFLAGS:
LDDLFLAGS = '--option-1 --option-2'
Which when passed to gcc is interpreted as a single option, and gcc
(rightfully) barfs on it, like with:
arm-linux-gnueabihf-gcc: error: unrecognized command line
option ‘-shared -g’
This is because perl-net-ssleay's buildsystem is really completely
brain-damaged. Other perl extensions do not behave like that, and
instead are doing the only sane thing to do: not add single quotes
around the definition, and just use what they were provided for
LDDLFLAGS.
So, just do the same for perl-net-ssleay. Since tweaking (yet once
more) their buildsystem is too complex, we just use a post-configure
hook to fix up the mess, by removing single quotes around the definition
of LDDLFLAGS.
Note: if only one option is specified, no single quotes are added,
but our hook is a no-op in this case.
See also:
http://lists.busybox.net/pipermail/buildroot/2014-July/101782.html
and the previous message for even more entertainment. ;-)
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[me: find the real cause of the issue, tweak the sed expression to not
force -shared and instead just trim the single quotes, enhance commit
log]
[Thomas: fix minor typos in the commit log, add comment above hook
definition]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to the full-blown install when tiny is not selected, we really
want all of it in that case.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When nasm was added in da8d09b716, it got both the host and the target
variants even though it doesn't have a Config.in and the target variant isn't
used anywhere. Therefore, this patch removes the unused target variant.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Perl extensions are loaded at runtime with dlopen(), so it does not
make sense to even build extensions that are written in C.
perl-xml-libxml is written in C, so it is not available when doing a
static build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <francois.perrad@gadz.org>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Perl extensions are loaded at runtime with dlopen(), so it does not
make sense to even build extensions that are written in C.
perl-net-ssleay is (partly) written in C, so it is not available when
doing a static build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <francois.perrad@gadz.org>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The buildsystem for perl-net-ssleay is totally brain-damaged: it tries
to execute the openssl program. It uses that to check the openssl
version, detect the prefix to openssl, and set the include and library
search paths.
Of course, it does not handle the destdir idiom, so it ends up finding
the host system's openssl (not even ours!), so it sets search paths to
/usr/inlcude and /usr/lib and /lib.
Well, guess what? It does not work.
Fix that by:
- passing the prefix to openssl in the environment, so it does not go
hunting for the host-system openssl;
- not checking the version string, since we can't run, and Buildroot
has the correct version anyway;
- not setting any -I or -L paths since our compiler/linker already
know where to look for for includes and libs.
Fixes:
http://autobuild.buildroot.net/results/135/135867ef85535863e3647cc5fb82accb6f77612c/
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[me: enhance commit log, add patch to avoid running openssl and setting
wrong include and library search paths]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some perl packages may use environment variables as a hint to know how
to be configured.
That's for example the case for perl-net-ssleay that uses
OPENSSL_PREFIX, if it is set in the environment, as the prefix to
openssl.
Add a new variable that packages can set if they need extra environment
variables. Update the manual accordingly.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: enhance the commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Disable all of the tests, including runtime that needs gnupg.
There's no longer --without configure options for them, it's now
--disable. Fixes:
http://autobuild.buildroot.net/results/eb1/eb1e06b1d99c441b6086c07ee04b084a61041dc7/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes the following build error reproducible with any linux kernel
module built with a recent buildroot toolchain:
LD [M] fs/jbd2/jbd2.ko
/bin/sh: line 1: 12069 Segmentation fault
buildroot/host/usr/bin/xtensa-buildroot-linux-uclibc-ld -r --no-relax
-T linux/scripts/module-common.lds --build-id
-o fs/jbd2/jbd2.ko fs/jbd2/jbd2.o fs/jbd2/jbd2.mod.o
Backported from: e7d17e71cdc10a2e81e454ce3b9637f1b2a587f2
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
