Remove the "project" feature
The "project" feature was designed to allow to several projects to be
built inside the same Buildroot source tree and allowing the toolchain
and non-configurable packages to be shared between the different
projects on the same architecture. While being interesting in theory,
this feature adds a level of complexity to Buildroot, both from an
user perspective and from a developer perspective, while one of the
main Buildroot strengh is to be simple. Moreover, this feature is only
seldomly used by our users.
From a user-level perspective, this for example allows to remove the
project_build_ARCH directory, which was very confusing. The
autotools-stamps directory is also removed, since these stamps are
back at their normal location.
Description of the changes involved :
* project/, directory removed
* Makefile
- Don't include project/Makefile.in and project/project.mk anymore
- Grab a copy of the contents of project/Makefile.in at the
location it was imported, but remove the definition related to
PROJECT_BUILD_DIR. The TARGET_DIR is now in
$(BUILD_DIR)/target_dir
- Remove the creation/removal of the $(PROJECT_BUILD_DIR) and
$(PROJECT_BUILD_DIR)/autotools-stamps directories
- Don't make world depends on target-host-info. This target was
defined by project/project.mk to customize /etc/issue,
/etc/hostname and create /etc/br-version depending on the
project definitions. We can of course imagine re-adding such a
feature later.
- Replace PROJECT_BUILD_DIR by BUILD_DIR everywhere
- Remove the update, log and lognr.$(PROJECT) target, they were
specific to the project feature.
* package/Makefile.autotools.in
- Replace PROJECT_BUILD_DIR by BUILD_DIR for the location of the
configure cache
- Move the INSTALL_TARGET and HOOK_POST_INSTALL stamps to the same
directory as the other stamps (i.e, in the package directory).
* package/Makefile.in
- Replace PROJECT_BUILD_DIR by BUILD_DIR for the location of the
configure cache
* package/at/at.mk,
package/busybox/busybox.mk,
package/busybox/initramfs.mk,
package/customize/customize.mk,
package/linux-fusion/linux-fusion.mk,
package/ltp-testsuite/ltp-testsuite.mk,
package/nfs-utils/nfs-utils.mk,
target/cpio/cpioroot.mk,
target/cramfs/cramfs.mk,
target/device/Atmel/DataFlashBoot/DataflashBoot.mk,
target/device/Atmel/Makefile.in,
target/device/Atmel/at91bootstrap/at91bootstrap.mk,
target/device/KwikByte/Makefile.in,
target/ext2/ext2root.mk,
target/initramfs/initramfs.mk,
target/iso9660/iso9660.mk,
target/jffs2/jffs2root.mk,
target/linux/Makefile.in,
target/romfs/romfs.mk,
target/squashfs/squashfsroot.mk,
target/tar/tarroot.mk,
target/ubifs/ubifsroot.mk
- Replace PROJECT_BUILD_DIR by BUILD_DIR
* target/device/Config.in
- Do not include project/Config.in anymore
* target/linux/Makefile.in.advanced
- Replace PROJECT_BUILD_DIR by BUILD_DIR
- Store the stamps file in $(STAMP_DIR) instead of
$(PROJECT_BUILD_DIR)/autotools-stamps
* target/u-boot/Makefile.in
- Replace PROJECT_BUILD_DIR by BUILD_DIR
- Remove $(PROJECT) from the U-Boot target binary name
- Remove the insertion in the configuration of the project name as
the hostname
- The u-boot-autoscript target now generates
$(U_BOOT_AUTOSCRIPT).img instead of
$(U_BOOT_AUTOSCRIPT).$(PROJECT)
* toolchain/gcc/gcc-uclibc-3.x.mk
toolchain/gcc/gcc-uclibc-4.x.mk
- Move the stamps files to $(STAMP_DIR)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit is contained in:
Thomas Petazzoni
parent
b3ee84e407
commit
397fe5cc0b
115
Makefile
115
Makefile
|
|
@ -217,10 +217,76 @@ BASE_TARGETS:=uclibc
|
|||
endif
|
||||
TARGETS:=
|
||||
|
||||
# setup our paths
|
||||
include project/Makefile.in
|
||||
# Strip off the annoying quoting
|
||||
ARCH:=$(call qstrip,$(BR2_ARCH))
|
||||
ifeq ($(ARCH),xtensa)
|
||||
ARCH:=$(ARCH)_$(call qstrip,$(BR2_xtensa_core_name))
|
||||
endif
|
||||
WGET:=$(call qstrip,$(BR2_WGET)) $(SPIDER) $(QUIET)
|
||||
SVN_CO:=$(call qstrip,$(BR2_SVN_CO)) $(QUIET)
|
||||
SVN_UP:=$(call qstrip,$(BR2_SVN_UP)) $(QUIET)
|
||||
BZR_CO:=$(call qstrip,$(BR2_BZR_CO)) $(QUIET)
|
||||
BZR_UP:=$(call qstrip,$(BR2_BZR_UP)) $(QUIET)
|
||||
GIT:=$(call qstrip,$(BR2_GIT)) $(QUIET)
|
||||
ZCAT:=$(call qstrip,$(BR2_ZCAT))
|
||||
BZCAT:=$(call qstrip,$(BR2_BZCAT))
|
||||
TAR_OPTIONS=$(call qstrip,$(BR2_TAR_OPTIONS)) -xf
|
||||
|
||||
BR2_DEPENDS_DIR=$(PROJECT_BUILD_DIR)/buildroot-config
|
||||
# Buildroot supports building out of tree similarly to the Linux kernel.
|
||||
# To use, add O= to the make command line (make O=/tmp/build)
|
||||
BASE_DIR:=$(shell pwd)
|
||||
ifdef O
|
||||
ifeq ("$(origin O)", "command line")
|
||||
BASE_DIR := $(shell mkdir -p $(O) && cd $(O) && pwd)
|
||||
$(if $(BASE_DIR),, $(error output directory "$(O)" does not exist))
|
||||
|
||||
# other packages might also support Linux-style out of tree builds
|
||||
# with the O=<dir> syntax (E.G. Busybox does). As make automatically
|
||||
# forwards command line variable definitions those packages get very
|
||||
# confused. Fix this by telling make to not do so
|
||||
MAKEOVERRIDES =
|
||||
endif
|
||||
endif
|
||||
|
||||
TOPDIR_PREFIX:=$(call qstrip,$(BR2_TOPDIR_PREFIX))_
|
||||
TOPDIR_SUFFIX:=_$(call qstrip,$(BR2_TOPDIR_SUFFIX))
|
||||
ifeq ($(TOPDIR_PREFIX),_)
|
||||
TOPDIR_PREFIX:=
|
||||
endif
|
||||
ifeq ($(TOPDIR_SUFFIX),_)
|
||||
TOPDIR_SUFFIX:=
|
||||
endif
|
||||
|
||||
DL_DIR=$(call qstrip,$(BR2_DL_DIR))
|
||||
ifeq ($(DL_DIR),)
|
||||
DL_DIR:=$(BASE_DIR)/dl
|
||||
endif
|
||||
|
||||
BUILD_DIR:=$(BASE_DIR)/$(TOPDIR_PREFIX)build_$(ARCH)$(ARCH_FPU_SUFFIX)$(TOPDIR_SUFFIX)
|
||||
|
||||
GNU_TARGET_SUFFIX:=-$(call qstrip,$(BR2_GNU_TARGET_SUFFIX))
|
||||
|
||||
STAGING_DIR:=$(call qstrip,$(BR2_STAGING_DIR))
|
||||
|
||||
# packages compiled for the host goes here
|
||||
HOST_DIR:=$(BUILD_DIR)/host_dir
|
||||
|
||||
# stamp (dependency) files go here
|
||||
STAMP_DIR:=$(BUILD_DIR)/stamps
|
||||
|
||||
BINARIES_DIR:=$(BASE_DIR)/binaries/
|
||||
TARGET_DIR:=$(BUILD_DIR)/target_dir
|
||||
|
||||
# define values for prepatched source trees for toolchains
|
||||
VENDOR_SITE:=$(call qstrip,$(BR2_VENDOR_SITE))
|
||||
VENDOR_SUFFIX:=$(call qstrip,$(BR2_VENDOR_SUFFIX))
|
||||
VENDOR_BINUTILS_RELEASE:=$(call qstrip,$(BR2_VENDOR_BINUTILS_RELEASE))
|
||||
VENDOR_GCC_RELEASE:=$(call qstrip,$(BR2_VENDOR_GCC_RELEASE))
|
||||
VENDOR_UCLIBC_RELEASE:=$(call qstrip,$(BR2_VENDOR_UCLIBC_RELEASE))
|
||||
VENDOR_GDB_RELEASE:=$(call qstrip,$(BR2_VENDOR_GDB_RELEASE))
|
||||
VENDOR_PATCH_DIR:=$(call qstrip,$(BR2_VENDOR_PATCH_DIR))
|
||||
|
||||
BR2_DEPENDS_DIR=$(BUILD_DIR)/buildroot-config
|
||||
|
||||
include toolchain/Makefile.in
|
||||
include package/Makefile.in
|
||||
|
|
@ -237,8 +303,6 @@ all: world
|
|||
# In this section, we need .config
|
||||
include .config.cmd
|
||||
|
||||
include project/*.mk
|
||||
|
||||
# We also need the various per-package makefiles, which also add
|
||||
# each selected package to TARGETS if that package was selected
|
||||
# in the .config file.
|
||||
|
|
@ -290,20 +354,18 @@ $(BR2_DEPENDS_DIR): .config
|
|||
cp -dpRf $(CONFIG)/buildroot-config $@
|
||||
|
||||
dirs: $(DL_DIR) $(TOOL_BUILD_DIR) $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
|
||||
$(HOST_DIR) $(BR2_DEPENDS_DIR) $(BINARIES_DIR) $(PROJECT_BUILD_DIR) \
|
||||
$(PROJECT_BUILD_DIR)/autotools-stamps $(STAMP_DIR)
|
||||
$(HOST_DIR) $(BR2_DEPENDS_DIR) $(BINARIES_DIR) $(STAMP_DIR)
|
||||
|
||||
$(BASE_TARGETS): dirs
|
||||
|
||||
world: dependencies dirs target-host-info $(BASE_TARGETS) $(TARGETS_ALL)
|
||||
world: dependencies dirs $(BASE_TARGETS) $(TARGETS_ALL)
|
||||
|
||||
|
||||
.PHONY: all world dirs clean dirclean distclean source \
|
||||
$(BASE_TARGETS) $(TARGETS) $(TARGETS_ALL) \
|
||||
$(TARGETS_CLEAN) $(TARGETS_DIRCLEAN) $(TARGETS_SOURCE) \
|
||||
$(DL_DIR) $(TOOL_BUILD_DIR) $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
|
||||
$(HOST_DIR) $(BR2_DEPENDS_DIR) $(BINARIES_DIR) $(PROJECT_BUILD_DIR) \
|
||||
$(PROJECT_BUILD_DIR)/autotools-stamps $(STAMP_DIR)
|
||||
$(HOST_DIR) $(BR2_DEPENDS_DIR) $(BINARIES_DIR) $(STAMP_DIR)
|
||||
|
||||
#############################################################
|
||||
#
|
||||
|
|
@ -311,8 +373,7 @@ world: dependencies dirs target-host-info $(BASE_TARGETS) $(TARGETS_ALL)
|
|||
# dependencies anywhere else
|
||||
#
|
||||
#############################################################
|
||||
$(DL_DIR) $(TOOL_BUILD_DIR) $(BUILD_DIR) $(HOST_DIR) $(PROJECT_BUILD_DIR) \
|
||||
$(PROJECT_BUILD_DIR)/autotools-stamps $(BINARIES_DIR) $(STAMP_DIR):
|
||||
$(DL_DIR) $(TOOL_BUILD_DIR) $(BUILD_DIR) $(HOST_DIR) $(BINARIES_DIR) $(STAMP_DIR):
|
||||
@mkdir -p $@
|
||||
|
||||
$(STAGING_DIR):
|
||||
|
|
@ -330,7 +391,7 @@ endif
|
|||
endif
|
||||
@mkdir -p $(STAGING_DIR)/usr/include
|
||||
|
||||
$(PROJECT_BUILD_DIR)/.root:
|
||||
$(BUILD_DIR)/.root:
|
||||
mkdir -p $(TARGET_DIR)
|
||||
if ! [ -d "$(TARGET_DIR)/bin" ]; then \
|
||||
if [ -d "$(TARGET_SKELETON)" ]; then \
|
||||
|
|
@ -345,10 +406,10 @@ $(PROJECT_BUILD_DIR)/.root:
|
|||
-find $(TARGET_DIR) -type f -name .empty -print0 | xargs -0 rm -rf
|
||||
touch $@
|
||||
|
||||
$(TARGET_DIR): $(PROJECT_BUILD_DIR)/.root
|
||||
$(TARGET_DIR): $(BUILD_DIR)/.root
|
||||
|
||||
erase-fakeroots:
|
||||
rm -f $(PROJECT_BUILD_DIR)/.fakeroot*
|
||||
rm -f $(BUILD_DIR)/.fakeroot*
|
||||
|
||||
target-finalize:
|
||||
ifeq ($(BR2_HAVE_DEVFILES),y)
|
||||
|
|
@ -372,7 +433,7 @@ ifneq ($(BR2_ROOTFS_POST_BUILD_SCRIPT),"")
|
|||
endif
|
||||
|
||||
ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
|
||||
LOCALE_WHITELIST=$(PROJECT_BUILD_DIR)/locales.nopurge
|
||||
LOCALE_WHITELIST=$(BUILD_DIR)/locales.nopurge
|
||||
LOCALE_NOPURGE=$(call qstrip,$(BR2_ENABLE_LOCALE_WHITELIST))
|
||||
|
||||
target-purgelocales:
|
||||
|
|
@ -403,21 +464,21 @@ external-deps:
|
|||
#
|
||||
#############################################################
|
||||
clean: $(TARGETS_CLEAN)
|
||||
rm -rf $(STAGING_DIR) $(TARGET_DIR) $(IMAGE) $(PROJECT_BUILD_DIR)/.root $(PROJECT_BUILD_DIR)/autotools-stamps $(STAMP_DIR)
|
||||
rm -rf $(STAGING_DIR) $(TARGET_DIR) $(IMAGE) $(BUILD_DIR)/.root $(STAMP_DIR)
|
||||
|
||||
dirclean: $(TARGETS_DIRCLEAN)
|
||||
rm -rf $(STAGING_DIR) $(TARGET_DIR) $(IMAGE) $(PROJECT_BUILD_DIR)/.root $(PROJECT_BUILD_DIR)/autotools-stamps $(STAMP_DIR)
|
||||
rm -rf $(STAGING_DIR) $(TARGET_DIR) $(IMAGE) $(BUILD_DIR)/.root $(STAMP_DIR)
|
||||
|
||||
distclean:
|
||||
ifeq ($(DL_DIR),$(BASE_DIR)/dl)
|
||||
rm -rf $(DL_DIR)
|
||||
endif
|
||||
rm -rf $(TOOL_BUILD_DIR) $(BUILD_DIR) $(PROJECT_BUILD_DIR) $(BINARIES_DIR) \
|
||||
rm -rf $(TOOL_BUILD_DIR) $(BUILD_DIR) $(BUILD_DIR) $(BINARIES_DIR) \
|
||||
.config.cmd
|
||||
$(MAKE) -C $(CONFIG) clean
|
||||
|
||||
sourceball:
|
||||
rm -rf $(BUILD_DIR) $(PROJECT_BUILD_DIR) $(BINARIES_DIR)
|
||||
rm -rf $(BUILD_DIR) $(BUILD_DIR) $(BINARIES_DIR)
|
||||
set -e; \
|
||||
cd ..; \
|
||||
rm -f buildroot.tar.bz2; \
|
||||
|
|
@ -530,28 +591,16 @@ distclean: clean
|
|||
endif # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
|
||||
|
||||
flush:
|
||||
rm -f $(PROJECT_BUILD_DIR)/tgt-config.cache
|
||||
rm -f $(BUILD_DIR)/tgt-config.cache
|
||||
|
||||
%_defconfig: $(CONFIG)/conf
|
||||
cp $(shell find ./target/ -name $@) .config
|
||||
-@$(MAKE) oldconfig
|
||||
|
||||
update:
|
||||
cp .config $(BOARD_PATH)/$(PROJECT)_defconfig
|
||||
|
||||
configured: dirs host-sed kernel-headers uclibc-config busybox-config linux26-config
|
||||
|
||||
prepatch: gcc-patched binutils-patched gdb-patched uclibc-patched
|
||||
|
||||
.lognr.$(PROJECT):
|
||||
@echo "0" > .lognr.$(PROJECT)
|
||||
|
||||
log: .lognr.$(PROJECT)
|
||||
@expr `cat .lognr.$(PROJECT)` + 1 > .lognr.$(PROJECT)
|
||||
@echo Creating $(PROJECT)-`cat .lognr.$(PROJECT)`.log
|
||||
@$(MAKE) > $(PROJECT)-`cat .lognr.$(PROJECT)`.log 2>&1
|
||||
|
||||
|
||||
cross: $(BASE_TARGETS)
|
||||
|
||||
help:
|
||||
|
|
|
|||
|
|
@ -243,7 +243,7 @@ $(BUILD_DIR)/%/.stamp_configured:
|
|||
$(TARGET_CONFIGURE_ENV) \
|
||||
$($(PKG)_CONF_ENV) \
|
||||
$(if $(THIS_SRCDIR),$(THIS_SRCDIR)/,./)configure \
|
||||
$(if $(filter YES,$($(PKG)_USE_CONFIG_CACHE)),--cache-file="$(PROJECT_BUILD_DIR)/tgt-config.cache",) \
|
||||
$(if $(filter YES,$($(PKG)_USE_CONFIG_CACHE)),--cache-file="$(BUILD_DIR)/tgt-config.cache",) \
|
||||
--target=$(GNU_TARGET_NAME) \
|
||||
--host=$(GNU_TARGET_NAME) \
|
||||
--build=$(GNU_HOST_NAME) \
|
||||
|
|
@ -274,7 +274,7 @@ $(BUILD_DIR)/%/.stamp_staging_installed:
|
|||
touch $@
|
||||
|
||||
# Install to target dir
|
||||
$(PROJECT_BUILD_DIR)/autotools-stamps/%_target_installed:
|
||||
$(BUILD_DIR)/%/.stamp_target_installed:
|
||||
$(call MESSAGE,"Installing to target")
|
||||
$($(PKG)_MAKE_ENV) $($(PKG)_MAKE) $($(PKG)_INSTALL_TARGET_OPT) -C $($(PKG)_DIR)/$($(PKG)_SUBDIR)
|
||||
$(if $(BR2_HAVE_MANPAGES),,for d in man share/man; do \
|
||||
|
|
@ -352,8 +352,7 @@ $(2)_DIR_PREFIX = $(if $(3),$(3),$(TOP_SRCDIR)/package)
|
|||
|
||||
|
||||
# define sub-target stamps
|
||||
# targets which affect $(TARGET_DIR) must use a unique stamp for each $(PROJECT)
|
||||
$(2)_TARGET_INSTALL_TARGET = $(PROJECT_BUILD_DIR)/autotools-stamps/$(1)_target_installed
|
||||
$(2)_TARGET_INSTALL_TARGET = $$($(2)_DIR)/.stamp_target_installed
|
||||
$(2)_TARGET_INSTALL_STAGING = $$($(2)_DIR)/.stamp_staging_installed
|
||||
$(2)_TARGET_BUILD = $$($(2)_DIR)/.stamp_built
|
||||
$(2)_TARGET_CONFIGURE = $$($(2)_DIR)/.stamp_configured
|
||||
|
|
@ -369,7 +368,7 @@ $(2)_TARGET_DIRCLEAN = $$($(2)_DIR)/.stamp_dircleaned
|
|||
$(2)_HOOK_POST_EXTRACT = $$($(2)_DIR)/.stamp_hook_post_extract
|
||||
$(2)_HOOK_POST_CONFIGURE = $$($(2)_DIR)/.stamp_hook_post_configure
|
||||
$(2)_HOOK_POST_BUILD = $$($(2)_DIR)/.stamp_hook_post_build
|
||||
$(2)_HOOK_POST_INSTALL = $(PROJECT_BUILD_DIR)/autotools-stamps/$(1)_hook_post_install
|
||||
$(2)_HOOK_POST_INSTALL = $$($(2)_DIR)/.stamp_hook_post_install
|
||||
|
||||
# human-friendly targets and target sequencing
|
||||
$(1): $(1)-install
|
||||
|
|
|
|||
|
|
@ -49,11 +49,11 @@ $(TARGET_DIR)/$(AT_TARGET_SCRIPT): $(AT_DIR)/$(AT_BINARY)
|
|||
# Use fakeroot to pretend to do 'make install' as root
|
||||
echo '$(MAKE) DAEMON_USERNAME=root DAEMON_GROUPNAME=root ' \
|
||||
'$(TARGET_CONFIGURE_OPTS) DESTDIR=$(TARGET_DIR) -C $(AT_DIR) install' \
|
||||
> $(PROJECT_BUILD_DIR)/.fakeroot.at
|
||||
> $(BUILD_DIR)/.fakeroot.at
|
||||
ifneq ($(BR2_HAVE_MANPAGES),y)
|
||||
echo 'rm -rf $(TARGET_DIR)/usr/man' >> $(PROJECT_BUILD_DIR)/.fakeroot.at
|
||||
echo 'rm -rf $(TARGET_DIR)/usr/man' >> $(BUILD_DIR)/.fakeroot.at
|
||||
endif
|
||||
echo 'rm -rf $(TARGET_DIR)/usr/doc/at' >> $(PROJECT_BUILD_DIR)/.fakeroot.at
|
||||
echo 'rm -rf $(TARGET_DIR)/usr/doc/at' >> $(BUILD_DIR)/.fakeroot.at
|
||||
$(INSTALL) -m 0755 -D $(AT_DIR)/debian/rc $(TARGET_DIR)/$(AT_TARGET_SCRIPT)
|
||||
|
||||
at: host-fakeroot $(TARGET_DIR)/$(AT_TARGET_SCRIPT)
|
||||
|
|
|
|||
|
|
@ -7,12 +7,12 @@
|
|||
|
||||
ifeq ($(BR2_PACKAGE_BUSYBOX_SNAPSHOT),y)
|
||||
# Be aware that this changes daily....
|
||||
BUSYBOX_DIR:=$(PROJECT_BUILD_DIR)/busybox
|
||||
BUSYBOX_DIR:=$(BUILD_DIR)/busybox
|
||||
BUSYBOX_SOURCE:=busybox-snapshot.tar.bz2
|
||||
BUSYBOX_SITE:=http://www.busybox.net/downloads/snapshots
|
||||
else
|
||||
BUSYBOX_VERSION=$(call qstrip,$(BR2_BUSYBOX_VERSION))
|
||||
BUSYBOX_DIR:=$(PROJECT_BUILD_DIR)/busybox-$(BUSYBOX_VERSION)
|
||||
BUSYBOX_DIR:=$(BUILD_DIR)/busybox-$(BUSYBOX_VERSION)
|
||||
BUSYBOX_SOURCE:=busybox-$(BUSYBOX_VERSION).tar.bz2
|
||||
BUSYBOX_SITE:=http://www.busybox.net/downloads
|
||||
endif
|
||||
|
|
@ -27,7 +27,7 @@ $(DL_DIR)/$(BUSYBOX_SOURCE):
|
|||
$(call DOWNLOAD,$(BUSYBOX_SITE),$(BUSYBOX_SOURCE))
|
||||
|
||||
$(BUSYBOX_DIR)/.unpacked: $(DL_DIR)/$(BUSYBOX_SOURCE)
|
||||
$(BUSYBOX_UNZIP) $(DL_DIR)/$(BUSYBOX_SOURCE) | tar -C $(PROJECT_BUILD_DIR) $(TAR_OPTIONS) -
|
||||
$(BUSYBOX_UNZIP) $(DL_DIR)/$(BUSYBOX_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
|
||||
ifeq ($(BR2_PACKAGE_SYSKLOGD),y)
|
||||
# if we have external syslogd, force busybox to use it
|
||||
$(SED) "/#include.*busybox\.h/a#define CONFIG_SYSLOGD" $(BUSYBOX_DIR)/init/init.c
|
||||
|
|
@ -126,11 +126,11 @@ busybox: $(TARGET_DIR)/bin/busybox
|
|||
|
||||
busybox-source: $(DL_DIR)/$(BUSYBOX_SOURCE)
|
||||
|
||||
busybox-unpacked: host-sed $(PROJECT_BUILD_DIR) $(BUSYBOX_DIR)/.unpacked
|
||||
busybox-unpacked: host-sed $(BUILD_DIR) $(BUSYBOX_DIR)/.unpacked
|
||||
|
||||
busybox-config: host-sed $(PROJECT_BUILD_DIR) $(BUSYBOX_DIR)/.config
|
||||
busybox-config: host-sed $(BUILD_DIR) $(BUSYBOX_DIR)/.config
|
||||
|
||||
busybox-menuconfig: host-sed $(PROJECT_BUILD_DIR) busybox-source $(BUSYBOX_DIR)/.config
|
||||
busybox-menuconfig: host-sed $(BUILD_DIR) busybox-source $(BUSYBOX_DIR)/.config
|
||||
$(MAKE) __TARGET_ARCH=$(ARCH) -C $(BUSYBOX_DIR) menuconfig
|
||||
|
||||
busybox-update:
|
||||
|
|
|
|||
|
|
@ -6,7 +6,7 @@
|
|||
ifeq ($(BR2_PACKAGE_BUSYBOX_INITRAMFS),y)
|
||||
|
||||
BUSYBOX_INITRAMFS_DIR:=$(BUSYBOX_DIR)-initramfs
|
||||
BR2_INITRAMFS_DIR:=$(PROJECT_BUILD_DIR)/initramfs
|
||||
BR2_INITRAMFS_DIR:=$(BUILD_DIR)/initramfs
|
||||
BB_INITRAMFS_TARGET:=$(IMAGE).initramfs_lst
|
||||
|
||||
$(BUSYBOX_INITRAMFS_DIR)/.unpacked: $(DL_DIR)/$(BUSYBOX_SOURCE)
|
||||
|
|
@ -105,39 +105,39 @@ $(BR2_INITRAMFS_DIR)/bin/busybox: $(BUSYBOX_INITRAMFS_DIR)/busybox
|
|||
|
||||
|
||||
$(BB_INITRAMFS_TARGET): host-fakeroot $(BR2_INITRAMFS_DIR)/bin/busybox
|
||||
ln -fs bin/busybox $(PROJECT_BUILD_DIR)/initramfs/init
|
||||
mkdir -p $(PROJECT_BUILD_DIR)/initramfs/etc
|
||||
ln -fs bin/busybox $(BUILD_DIR)/initramfs/init
|
||||
mkdir -p $(BUILD_DIR)/initramfs/etc
|
||||
cat target/generic/target_busybox_skeleton/etc/inittab > \
|
||||
$(PROJECT_BUILD_DIR)/initramfs/etc/inittab
|
||||
rm -f $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(BB_INITRAMFS_TARGET))
|
||||
(echo "chown -R 0:0 $(PROJECT_BUILD_DIR)/initramfs"; \
|
||||
echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(PROJECT_BUILD_DIR)/initramfs"; \
|
||||
echo "$(SHELL) target/initramfs/gen_initramfs_list.sh -u 0 -g 0 $(PROJECT_BUILD_DIR)/initramfs > $(BB_INITRAMFS_TARGET)"; \
|
||||
) > $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(BB_INITRAMFS_TARGET))
|
||||
chmod +x $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(BB_INITRAMFS_TARGET))
|
||||
$(BUILD_DIR)/initramfs/etc/inittab
|
||||
rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(BB_INITRAMFS_TARGET))
|
||||
(echo "chown -R 0:0 $(BUILD_DIR)/initramfs"; \
|
||||
echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(BUILD_DIR)/initramfs"; \
|
||||
echo "$(SHELL) target/initramfs/gen_initramfs_list.sh -u 0 -g 0 $(BUILD_DIR)/initramfs > $(BB_INITRAMFS_TARGET)"; \
|
||||
) > $(BUILD_DIR)/_fakeroot.$(notdir $(BB_INITRAMFS_TARGET))
|
||||
chmod +x $(BUILD_DIR)/_fakeroot.$(notdir $(BB_INITRAMFS_TARGET))
|
||||
$(HOST_DIR)/usr/bin/fakeroot -- \
|
||||
$(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(BB_INITRAMFS_TARGET))
|
||||
rm -f $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(BB_INITRAMFS_TARGET))
|
||||
$(BUILD_DIR)/_fakeroot.$(notdir $(BB_INITRAMFS_TARGET))
|
||||
rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(BB_INITRAMFS_TARGET))
|
||||
touch -c $@
|
||||
|
||||
$(PROJECT_BUILD_DIR)/.initramfs_done: $(BR2_INITRAMFS_DIR)/bin/busybox \
|
||||
$(BUILD_DIR)/.initramfs_done: $(BR2_INITRAMFS_DIR)/bin/busybox \
|
||||
$(BB_INITRAMFS_TARGET)
|
||||
touch $@
|
||||
|
||||
busybox-initramfs-source:
|
||||
busybox-initramfs: $(PROJECT_BUILD_DIR)/.initramfs_done
|
||||
busybox-initramfs: $(BUILD_DIR)/.initramfs_done
|
||||
|
||||
busybox-initramfs-menuconfig: host-sed $(BUILD_DIR) busybox-source $(BUSYBOX_INITRAMFS_DIR)/.configured
|
||||
$(MAKE) __TARGET_ARCH=$(ARCH) -C $(BUSYBOX_INITRAMFS_DIR) menuconfig
|
||||
|
||||
busybox-initramfs-clean:
|
||||
rm -f $(BUSYBOX_INITRAMFS_DIR)/busybox $(PROJECT_BUILD_DIR)/.initramfs_*
|
||||
rm -f $(BUSYBOX_INITRAMFS_DIR)/busybox $(BUILD_DIR)/.initramfs_*
|
||||
rm -rf $(BR2_INITRAMFS_DIR) $(BB_INITRAMFS_TARGET)
|
||||
-$(MAKE) -C $(BUSYBOX_INITRAMFS_DIR) clean
|
||||
|
||||
busybox-initramfs-dirclean:
|
||||
rm -rf $(BUSYBOX_INITRAMFS_DIR) $(BR2_INITRAMFS_DIR) \
|
||||
$(PROJECT_BUILD_DIR)/.initramfs_*
|
||||
$(BUILD_DIR)/.initramfs_*
|
||||
endif
|
||||
#############################################################
|
||||
#
|
||||
|
|
|
|||
|
|
@ -6,14 +6,14 @@
|
|||
CUST_DIR:=package/customize/source
|
||||
|
||||
$(BUILD_DIR)/.customize:
|
||||
rm -f $(PROJECT_BUILD_DIR)/series
|
||||
rm -f $(BUILD_DIR)/series
|
||||
(cd $(CUST_DIR); \
|
||||
/bin/ls -d * > $(PROJECT_BUILD_DIR)/series || \
|
||||
touch $(PROJECT_BUILD_DIR)/series )
|
||||
for f in `cat $(PROJECT_BUILD_DIR)/series`; do \
|
||||
/bin/ls -d * > $(BUILD_DIR)/series || \
|
||||
touch $(BUILD_DIR)/series )
|
||||
for f in `cat $(BUILD_DIR)/series`; do \
|
||||
cp -af $(CUST_DIR)/$$f $(TARGET_DIR)/$$f; \
|
||||
done
|
||||
rm -f $(PROJECT_BUILD_DIR)/series
|
||||
rm -f $(BUILD_DIR)/series
|
||||
touch $@
|
||||
|
||||
customize: $(BUILD_DIR)/.customize
|
||||
|
|
|
|||
|
|
@ -13,7 +13,7 @@ LINUX_FUSION_INSTALL_TARGET = YES
|
|||
# BR2_LINUX26_VERSION is not really dependable
|
||||
# LINUX26_VERSION is not yet set.
|
||||
# Retrieve REAL kernel version from file.
|
||||
LINUX_FOR_FUSION=`cat $(PROJECT_BUILD_DIR)/.linux-version`
|
||||
LINUX_FOR_FUSION=`cat $(BUILD_DIR)/.linux-version`
|
||||
|
||||
LINUX_FUSION_DIR:=$(BUILD_DIR)/linux-fusion-$(LINUX_FUSION_VERSION)
|
||||
LINUX_FUSION_ETC_DIR:=$(TARGET_DIR)/etc/udev/rules.d
|
||||
|
|
@ -21,14 +21,14 @@ LINUX_FUSION_ETC_DIR:=$(TARGET_DIR)/etc/udev/rules.d
|
|||
LINUX_FUSION_CAT:=$(ZCAT)
|
||||
|
||||
LINUX_FUSION_MAKE_OPTS:= KERNEL_VERSION=$(LINUX_FOR_FUSION)
|
||||
LINUX_FUSION_MAKE_OPTS += KERNEL_BUILD=$(PROJECT_BUILD_DIR)/linux-$(LINUX_FOR_FUSION)
|
||||
LINUX_FUSION_MAKE_OPTS += KERNEL_SOURCE=$(PROJECT_BUILD_DIR)/linux-$(LINUX_FOR_FUSION)
|
||||
LINUX_FUSION_MAKE_OPTS += KERNEL_BUILD=$(BUILD_DIR)/linux-$(LINUX_FOR_FUSION)
|
||||
LINUX_FUSION_MAKE_OPTS += KERNEL_SOURCE=$(BUILD_DIR)/linux-$(LINUX_FOR_FUSION)
|
||||
|
||||
LINUX_FUSION_MAKE_OPTS += SYSROOT=$(STAGING_DIR)
|
||||
LINUX_FUSION_MAKE_OPTS += ARCH=$(BR2_ARCH)
|
||||
LINUX_FUSION_MAKE_OPTS += CROSS_COMPILE=$(TARGET_CROSS)
|
||||
LINUX_FUSION_MAKE_OPTS += KERNEL_MODLIB=/lib/modules/$(LINUX_FOR_FUSION)
|
||||
LINUX_FUSION_MAKE_OPTS += DESTDIR=$(PROJECT_BUILD_DIR)/root
|
||||
LINUX_FUSION_MAKE_OPTS += DESTDIR=$(BUILD_DIR)/root
|
||||
LINUX_FUSION_MAKE_OPTS += HEADERDIR=$(STAGING_DIR)
|
||||
#LINUX_FUSION_MAKE_OPTS +=
|
||||
|
||||
|
|
|
|||
|
|
@ -48,7 +48,7 @@ $(LTP_TESTSUITE_DIR)/.installed: $(LTP_TESTSUITE_DIR)/.compiled
|
|||
# Use fakeroot to pretend to do 'make install' as root
|
||||
echo '$(MAKE1) $(TARGET_CONFIGURE_OPTS) CROSS_COMPILER=$(TARGET_CROSS) ' \
|
||||
'-C $(LTP_TESTSUITE_DIR) install' \
|
||||
> $(PROJECT_BUILD_DIR)/.fakeroot.ltp
|
||||
> $(BUILD_DIR)/.fakeroot.ltp
|
||||
touch $@
|
||||
|
||||
ltp-testsuite: host-fakeroot $(LTP_TESTSUITE_DIR)/.installed
|
||||
|
|
|
|||
|
|
@ -59,7 +59,7 @@ NFS_UTILS_TARGETS_$(BR2_PACKAGE_NFS_UTILS_RPCDEBUG) += usr/sbin/rpcdebug
|
|||
NFS_UTILS_TARGETS_$(BR2_PACKAGE_NFS_UTILS_RPC_LOCKD) += usr/sbin/rpc.lockd
|
||||
NFS_UTILS_TARGETS_$(BR2_PACKAGE_NFS_UTILS_RPC_RQUOTAD) += usr/sbin/rpc.rquotad
|
||||
|
||||
$(PROJECT_BUILD_DIR)/.fakeroot.nfs-utils: $(NFS_UTILS_DIR)/$(NFS_UTILS_BINARY)
|
||||
$(BUILD_DIR)/.fakeroot.nfs-utils: $(NFS_UTILS_DIR)/$(NFS_UTILS_BINARY)
|
||||
# Use fakeroot to pretend to do 'make install' as root
|
||||
echo '$(MAKE) prefix=$(TARGET_DIR)/usr statedir=$(TARGET_DIR)/var/lib/nfs $(TARGET_CONFIGURE_OPTS) -C $(NFS_UTILS_DIR) install' > $@
|
||||
echo 'rm -f $(TARGET_DIR)/usr/bin/event_rpcgen.py $(TARGET_DIR)/usr/sbin/nhfs* $(TARGET_DIR)/usr/sbin/nfsstat $(TARGET_DIR)/usr/sbin/showmount' >> $@
|
||||
|
|
@ -70,7 +70,7 @@ $(PROJECT_BUILD_DIR)/.fakeroot.nfs-utils: $(NFS_UTILS_DIR)/$(NFS_UTILS_BINARY)
|
|||
echo "file; done" >> $@
|
||||
echo 'rm -rf $(TARGET_DIR)/var/lib/nfs' >> $@
|
||||
|
||||
$(TARGET_DIR)/$(NFS_UTILS_TARGET_BINARY): $(PROJECT_BUILD_DIR)/.fakeroot.nfs-utils
|
||||
$(TARGET_DIR)/$(NFS_UTILS_TARGET_BINARY): $(BUILD_DIR)/.fakeroot.nfs-utils
|
||||
touch -c $@
|
||||
|
||||
nfs-utils: host-fakeroot $(TARGET_DIR)/$(NFS_UTILS_TARGET_BINARY)
|
||||
|
|
@ -81,7 +81,7 @@ nfs-utils-clean:
|
|||
rm -f $(TARGET_DIR)/$$file; \
|
||||
done
|
||||
-$(MAKE) -C $(NFS_UTILS_DIR) clean
|
||||
rm -f $(PROJECT_BUILD_DIR)/.fakeroot.nfs-utils
|
||||
rm -f $(BUILD_DIR)/.fakeroot.nfs-utils
|
||||
|
||||
nfs-utils-dirclean:
|
||||
rm -rf $(NFS_UTILS_DIR)
|
||||
|
|
|
|||
|
|
@ -1,25 +0,0 @@
|
|||
comment "Project Options"
|
||||
|
||||
config BR2_PROJECT
|
||||
string "Project name"
|
||||
default "uclibc"
|
||||
help
|
||||
The project name is used to define subdirectories
|
||||
* where the Board Support Packages are built
|
||||
(Linux,Root fs Bootmonitor,Utilities etc.)
|
||||
* where the resulting binaries are stored.
|
||||
Older targets may still build in the build_<arch>
|
||||
and store binaries in the top directory.
|
||||
|
||||
config BR2_HOSTNAME
|
||||
string "hostname"
|
||||
default "uclibc"
|
||||
help
|
||||
The hostname string is stored in "/etc/hostname"
|
||||
|
||||
config BR2_BANNER
|
||||
string "banner"
|
||||
default "Welcome to Buildroot"
|
||||
help
|
||||
The banner string is stored in "/etc/issue"
|
||||
|
||||
|
|
@ -1,79 +0,0 @@
|
|||
PROJECT:=$(call qstrip,$(BR2_PROJECT))
|
||||
TARGET_HOSTNAME:=$(call qstrip,$(BR2_HOSTNAME))
|
||||
BANNER:=$(call qstrip,$(BR2_BANNER))
|
||||
|
||||
# silent mode requested?
|
||||
QUIET:=$(if $(findstring s,$(MAKEFLAGS)),-q,)
|
||||
|
||||
# Strip off the annoying quoting
|
||||
ARCH:=$(call qstrip,$(BR2_ARCH))
|
||||
ifeq ($(ARCH),xtensa)
|
||||
ARCH:=$(ARCH)_$(call qstrip,$(BR2_xtensa_core_name))
|
||||
endif
|
||||
WGET:=$(call qstrip,$(BR2_WGET)) $(SPIDER) $(QUIET)
|
||||
SVN_CO:=$(call qstrip,$(BR2_SVN_CO)) $(QUIET)
|
||||
SVN_UP:=$(call qstrip,$(BR2_SVN_UP)) $(QUIET)
|
||||
BZR_CO:=$(call qstrip,$(BR2_BZR_CO)) $(QUIET)
|
||||
BZR_UP:=$(call qstrip,$(BR2_BZR_UP)) $(QUIET)
|
||||
GIT:=$(call qstrip,$(BR2_GIT)) $(QUIET)
|
||||
ZCAT:=$(call qstrip,$(BR2_ZCAT))
|
||||
BZCAT:=$(call qstrip,$(BR2_BZCAT))
|
||||
TAR_OPTIONS=$(call qstrip,$(BR2_TAR_OPTIONS)) -xf
|
||||
|
||||
# Buildroot supports building out of tree similarly to the Linux kernel.
|
||||
# To use, add O= to the make command line (make O=/tmp/build)
|
||||
BASE_DIR:=$(shell pwd)
|
||||
ifdef O
|
||||
ifeq ("$(origin O)", "command line")
|
||||
BASE_DIR := $(shell mkdir -p $(O) && cd $(O) && pwd)
|
||||
$(if $(BASE_DIR),, $(error output directory "$(O)" does not exist))
|
||||
|
||||
# other packages might also support Linux-style out of tree builds
|
||||
# with the O=<dir> syntax (E.G. Busybox does). As make automatically
|
||||
# forwards command line variable definitions those packages get very
|
||||
# confused. Fix this by telling make to not do so
|
||||
MAKEOVERRIDES =
|
||||
endif
|
||||
endif
|
||||
|
||||
TOPDIR_PREFIX:=$(call qstrip,$(BR2_TOPDIR_PREFIX))_
|
||||
TOPDIR_SUFFIX:=_$(call qstrip,$(BR2_TOPDIR_SUFFIX))
|
||||
ifeq ($(TOPDIR_PREFIX),_)
|
||||
TOPDIR_PREFIX:=
|
||||
endif
|
||||
ifeq ($(TOPDIR_SUFFIX),_)
|
||||
TOPDIR_SUFFIX:=
|
||||
endif
|
||||
|
||||
DL_DIR=$(call qstrip,$(BR2_DL_DIR))
|
||||
ifeq ($(DL_DIR),)
|
||||
DL_DIR:=$(BASE_DIR)/dl
|
||||
endif
|
||||
|
||||
# All non-configurable packages should be built in BUILD_DIR
|
||||
BUILD_DIR:=$(BASE_DIR)/$(TOPDIR_PREFIX)build_$(ARCH)$(ARCH_FPU_SUFFIX)$(TOPDIR_SUFFIX)
|
||||
|
||||
GNU_TARGET_SUFFIX:=-$(call qstrip,$(BR2_GNU_TARGET_SUFFIX))
|
||||
|
||||
STAGING_DIR:=$(call qstrip,$(BR2_STAGING_DIR))
|
||||
|
||||
# packages compiled for the host goes here
|
||||
HOST_DIR:=$(BUILD_DIR)/host_dir
|
||||
|
||||
# stamp (dependency) files go here
|
||||
STAMP_DIR:=$(BUILD_DIR)/stamps
|
||||
|
||||
# All configurable packages (like Busybox,Linux etc) should be built
|
||||
# in PROJECT_BUILD_DIR
|
||||
PROJECT_BUILD_DIR:=$(BASE_DIR)/$(TOPDIR_PREFIX)project_build_$(ARCH)$(ARCH_FPU_SUFFIX)$(TOPDIR_SUFFIX)/$(PROJECT)
|
||||
BINARIES_DIR:=$(BASE_DIR)/binaries/$(PROJECT)
|
||||
TARGET_DIR:=$(PROJECT_BUILD_DIR)/root
|
||||
|
||||
# define values for prepatched source trees for toolchains
|
||||
VENDOR_SITE:=$(call qstrip,$(BR2_VENDOR_SITE))
|
||||
VENDOR_SUFFIX:=$(call qstrip,$(BR2_VENDOR_SUFFIX))
|
||||
VENDOR_BINUTILS_RELEASE:=$(call qstrip,$(BR2_VENDOR_BINUTILS_RELEASE))
|
||||
VENDOR_GCC_RELEASE:=$(call qstrip,$(BR2_VENDOR_GCC_RELEASE))
|
||||
VENDOR_UCLIBC_RELEASE:=$(call qstrip,$(BR2_VENDOR_UCLIBC_RELEASE))
|
||||
VENDOR_GDB_RELEASE:=$(call qstrip,$(BR2_VENDOR_GDB_RELEASE))
|
||||
VENDOR_PATCH_DIR:=$(call qstrip,$(BR2_VENDOR_PATCH_DIR))
|
||||
|
|
@ -1,52 +0,0 @@
|
|||
PROJECT_FILE:=$(LOCAL)/$(PROJECT)/$(PROJECT).config
|
||||
|
||||
|
||||
.PHONY: target-host-info saveconfig getconfig
|
||||
|
||||
target-host-info: $(TARGET_DIR)/etc/issue $(TARGET_DIR)/etc/hostname $(TARGET_DIR)/etc/br-version
|
||||
|
||||
$(TARGET_DIR)/etc/issue: .config
|
||||
mkdir -p $(TARGET_DIR)/etc
|
||||
echo "" > $@
|
||||
echo "" >> $@
|
||||
echo "$(BANNER)" >> $@
|
||||
|
||||
$(TARGET_DIR)/etc/hostname: .config
|
||||
mkdir -p $(TARGET_DIR)/etc
|
||||
echo "$(TARGET_HOSTNAME)" > $@
|
||||
|
||||
$(TARGET_DIR)/etc/br-version: .config
|
||||
mkdir -p $(TARGET_DIR)/etc
|
||||
echo $(BR2_VERSION)$(shell $(TOPDIR)/scripts/setlocalversion) >$@
|
||||
|
||||
saveconfig:
|
||||
mkdir -p $(LOCAL)/$(PROJECT)
|
||||
-cp .config $(PROJECT_FILE)
|
||||
if [ -f $(LINUX26_DIR)/.config ]; then \
|
||||
cp $(LINUX26_DIR)/.config \
|
||||
$(LOCAL)/$(PROJECT)/linux-$(LINUX26_VERSION).config; \
|
||||
$(SED) '/BR2_PACKAGE_LINUX_KCONFIG/d' $(PROJECT_FILE); \
|
||||
echo "BR2_PACKAGE_LINUX_KCONFIG=\"$(LOCAL)/$(PROJECT)/linux-$(LINUX26_VERSION).config\"" >> $(PROJECT_FILE); \
|
||||
$(SED) '/BR2_BOARD_PATH/d' $(PROJECT_FILE); \
|
||||
echo "BR2_BOARD_PATH=\"$(LOCAL)/$(PROJECT)\"" >> $(PROJECT_FILE); \
|
||||
fi
|
||||
if [ -f $(BUSYBOX_DIR)/.config ]; then \
|
||||
cp $(BUSYBOX_DIR)/.config \
|
||||
$(LOCAL)/$(PROJECT)/busybox-$(BUSYBOX_VERSION).config; \
|
||||
$(SED) '/BR2_PACKAGE_BUSYBOX_CONFIG/d' $(PROJECT_FILE); \
|
||||
echo "BR2_PACKAGE_BUSYBOX_CONFIG=\"$(LOCAL)/$(PROJECT)/busybox-$(BUSYBOX_VERSION).config\"" >> $(PROJECT_FILE); \
|
||||
fi
|
||||
if [ -f $(UCLIBC_DIR)/.config ]; then \
|
||||
cp $(UCLIBC_DIR)/.config \
|
||||
$(LOCAL)/$(PROJECT)/uclibc-$(UCLIBC_VER).config; \
|
||||
$(SED) '/BR2_UCLIBC_CONFIG/d' $(PROJECT_FILE); \
|
||||
echo "BR2_UCLIBC_CONFIG=\"$(LOCAL)/$(PROJECT)/uclibc-$(UCLIBC_VER).config\"" >> $(PROJECT_FILE); \
|
||||
fi
|
||||
if [ -f $(UBOOT_DIR)/include/configs/$(PROJECT).h ]; then \
|
||||
mkdir -p $(LOCAL)/$(PROJECT)/u-boot; \
|
||||
cp $(UBOOT_DIR)/include/configs/$(PROJECT).h \
|
||||
$(LOCAL)/$(PROJECT)/u-boot/$(PROJECT).h; \
|
||||
fi
|
||||
|
||||
getconfig:
|
||||
-cp $(LOCAL)/$(PROJECT)/$(PROJECT).config .config
|
||||
|
|
@ -40,21 +40,21 @@ cpioroot-init:
|
|||
|
||||
$(CPIO_BASE): host-fakeroot makedevs cpioroot-init
|
||||
# Use fakeroot to pretend all target binaries are owned by root
|
||||
rm -f $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
|
||||
touch $(PROJECT_BUILD_DIR)/.fakeroot.00000
|
||||
cat $(PROJECT_BUILD_DIR)/.fakeroot* > $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
|
||||
echo "chown -R 0:0 $(TARGET_DIR)" >> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
|
||||
rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
|
||||
touch $(BUILD_DIR)/.fakeroot.00000
|
||||
cat $(BUILD_DIR)/.fakeroot* > $(BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
|
||||
echo "chown -R 0:0 $(TARGET_DIR)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
|
||||
ifneq ($(TARGET_DEVICE_TABLE),)
|
||||
# Use fakeroot to pretend to create all needed device nodes
|
||||
echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
|
||||
>> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
|
||||
>> $(BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
|
||||
endif
|
||||
# Use fakeroot so tar believes the previous fakery
|
||||
echo "cd $(TARGET_DIR) && find . | cpio --quiet -o -H newc > $(CPIO_BASE)" \
|
||||
>> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
|
||||
chmod a+x $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
|
||||
$(HOST_DIR)/usr/bin/fakeroot -- $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
|
||||
#-@rm -f $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
|
||||
>> $(BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
|
||||
chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
|
||||
$(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
|
||||
#-@rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(CPIO_BASE))
|
||||
ifeq ($(CPIO_ROOTFS_COMPRESSOR),)
|
||||
ifneq ($(ROOTFS_CPIO_COPYTO),)
|
||||
$(Q)cp -f $(CPIO_BASE) $(ROOTFS_CPIO_COPYTO)
|
||||
|
|
|
|||
|
|
@ -52,21 +52,21 @@ CRAMFS_TARGET=$(IMAGE).cramfs
|
|||
|
||||
cramfsroot: host-fakeroot makedevs cramfs
|
||||
# Use fakeroot to pretend all target binaries are owned by root
|
||||
rm -f $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
|
||||
touch $(PROJECT_BUILD_DIR)/.fakeroot.00000
|
||||
cat $(PROJECT_BUILD_DIR)/.fakeroot* > $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
|
||||
echo "chown -R 0:0 $(TARGET_DIR)" >> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
|
||||
rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
|
||||
touch $(BUILD_DIR)/.fakeroot.00000
|
||||
cat $(BUILD_DIR)/.fakeroot* > $(BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
|
||||
echo "chown -R 0:0 $(TARGET_DIR)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
|
||||
ifneq ($(TARGET_DEVICE_TABLE),)
|
||||
# Use fakeroot to pretend to create all needed device nodes
|
||||
echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
|
||||
>> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
|
||||
>> $(BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
|
||||
endif
|
||||
# Use fakeroot so mkcramfs believes the previous fakery
|
||||
echo "$(CRAMFS_DIR)/mkcramfs -q $(CRAMFS_OPTS) " \
|
||||
"$(TARGET_DIR) $(CRAMFS_TARGET)" >> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
|
||||
chmod a+x $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
|
||||
$(HOST_DIR)/usr/bin/fakeroot -- $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
|
||||
-@rm -f $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
|
||||
"$(TARGET_DIR) $(CRAMFS_TARGET)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
|
||||
chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
|
||||
$(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
|
||||
-@rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(CRAMFS_TARGET))
|
||||
|
||||
cramfsroot-source: cramfs-source
|
||||
|
||||
|
|
|
|||
|
|
@ -8,16 +8,16 @@ DATAFLASHBOOT_NAME:=DataflashBoot-$(DATAFLASHBOOT_VERSION)
|
|||
ATMEL_MIRROR:=$(call qstrip,$(BR2_ATMEL_MIRROR))
|
||||
DATAFLASHBOOT_SITE:=$(ATMEL_MIRROR)
|
||||
DATAFLASHBOOT_SOURCE:=$(DATAFLASHBOOT_NAME).tar.bz2
|
||||
DATAFLASHBOOT_DIR:=$(PROJECT_BUILD_DIR)/$(DATAFLASHBOOT_NAME)
|
||||
DATAFLASHBOOT_DIR:=$(BUILD_DIR)/$(DATAFLASHBOOT_NAME)
|
||||
DATAFLASHBOOT_BINARY:=$(DATAFLASHBOOT_NAME).bin
|
||||
|
||||
$(DL_DIR)/$(DATAFLASHBOOT_SOURCE):
|
||||
$(call DOWNLOAD,$(DATAFLASHBOOT_SITE),$(DATAFLASHBOOT_SOURCE))
|
||||
|
||||
$(DATAFLASHBOOT_DIR)/.unpacked: $(DL_DIR)/$(DATAFLASHBOOT_SOURCE)
|
||||
mkdir -p $(PROJECT_BUILD_DIR)
|
||||
mkdir -p $(BUILD_DIR)
|
||||
ls $(DL_DIR)/$(DATAFLASHBOOT_SOURCE)
|
||||
$(BZCAT) $(DL_DIR)/$(DATAFLASHBOOT_SOURCE) | tar -C $(PROJECT_BUILD_DIR) $(TAR_OPTIONS) -
|
||||
$(BZCAT) $(DL_DIR)/$(DATAFLASHBOOT_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
|
||||
touch $(DATAFLASHBOOT_DIR)/.unpacked
|
||||
|
||||
$(DATAFLASHBOOT_DIR)/$(DATAFLASHBOOT_BINARY): $(DATAFLASHBOOT_DIR)/.unpacked
|
||||
|
|
|
|||
|
|
@ -38,7 +38,7 @@ LINUX26_RC_PATCH:=$(call qstrip,$(BR2_LINUX26_RC_PATCH))
|
|||
LINUX26_KCONFIG:=$(BOARD_PATH)/$(BOARD_NAME)-linux-$(LINUX26_VERSION).config
|
||||
|
||||
# This should be part of target/linux/Makefile.in
|
||||
LINUX26_BUILD_DIR:=$(PROJECT_BUILD_DIR)
|
||||
LINUX26_BUILD_DIR:=$(BUILD_DIR)
|
||||
|
||||
#LINUX26_BINLOC=$(LINUX26_FORMAT)
|
||||
#LINUX26_BINLOC:=$(BINARIES_DIR)/$(LINUX26_KERNEL)
|
||||
|
|
@ -80,7 +80,7 @@ include $(ATMEL_PATH)/at91bootstrap/at91bootstrap.mk
|
|||
endif
|
||||
|
||||
atmel_status:
|
||||
@echo PROJECT_BUILD_DIR=$(PROJECT_BUILD_DIR)
|
||||
@echo BUILD_DIR=$(BUILD_DIR)
|
||||
@echo BOARD_NAME=$(BOARD_NAME)
|
||||
@echo BR2_BOARD_PATH=$(BR2_BOARD_PATH)
|
||||
@echo BR2_MAJOR_MINOR=$(BR2_LINUX_MAJOR_VERSION)$(BR2_LINUX_MINOR_VERSION)
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@ AT91BOOTSTRAP_NAME:=at91bootstrap-$(AT91BOOTSTRAP_VERSION)
|
|||
ATMEL_MIRROR:=$(call qstrip,$(BR2_ATMEL_MIRROR))
|
||||
AT91BOOTSTRAP_SITE:=$(ATMEL_MIRROR)
|
||||
AT91BOOTSTRAP_SOURCE:=$(AT91BOOTSTRAP_NAME).tar.bz2
|
||||
AT91BOOTSTRAP_DIR:=$(PROJECT_BUILD_DIR)/$(AT91BOOTSTRAP_NAME)
|
||||
AT91BOOTSTRAP_DIR:=$(BUILD_DIR)/$(AT91BOOTSTRAP_NAME)
|
||||
AT91BOOTSTRAP:=$(call qstrip,$(BR2_AT91BOOTSTRAP))
|
||||
AT91BOOTSTRAP_ZCAT:=$(BZCAT)
|
||||
|
||||
|
|
@ -37,8 +37,8 @@ $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE):
|
|||
$(call DOWNLOAD,$(AT91BOOTSTRAP_SITE),$(AT91BOOTSTRAP_SOURCE))
|
||||
|
||||
$(AT91BOOTSTRAP_DIR)/.unpacked: $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE)
|
||||
mkdir -p $(PROJECT_BUILD_DIR)
|
||||
$(AT91BOOTSTRAP_ZCAT) $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE) | tar -C $(PROJECT_BUILD_DIR) $(TAR_OPTIONS) -
|
||||
mkdir -p $(BUILD_DIR)
|
||||
$(AT91BOOTSTRAP_ZCAT) $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
|
||||
toolchain/patch-kernel.sh $(AT91BOOTSTRAP_DIR) target/device/Atmel/at91bootstrap/ at91bootstrap-$(AT91BOOTSTRAP_VERSION)\*.patch
|
||||
touch $(AT91BOOTSTRAP_DIR)/.unpacked
|
||||
|
||||
|
|
|
|||
|
|
@ -1,7 +1,5 @@
|
|||
menu "Target options"
|
||||
|
||||
source "project/Config.in"
|
||||
|
||||
comment "Preset Devices"
|
||||
|
||||
source "target/device/ARMLTD/Config.in"
|
||||
|
|
|
|||
|
|
@ -20,7 +20,7 @@ LINUX26_KCONFIG:=$(BOARD_PATH)/$(BOARD_NAME)-linux.config
|
|||
endif
|
||||
|
||||
# This should be part of target/linux/Makefile.in
|
||||
LINUX26_BUILD_DIR:=$(PROJECT_BUILD_DIR)
|
||||
LINUX26_BUILD_DIR:=$(BUILD_DIR)
|
||||
|
||||
LINUX26_BINLOC=arch/$(KERNEL_ARCH)/boot/$(LINUX26_FORMAT)
|
||||
|
||||
|
|
@ -38,7 +38,7 @@ endif
|
|||
# Needs to be AFTER board specific Makefiles
|
||||
|
||||
kwikbyte_status:
|
||||
@echo PROJECT_BUILD_DIR=$(PROJECT_BUILD_DIR)
|
||||
@echo BUILD_DIR=$(BUILD_DIR)
|
||||
@echo BOARD_NAME=$(BOARD_NAME)
|
||||
@echo BR2_BOARD_PATH=$(BR2_BOARD_PATH)
|
||||
@echo MAJOR_MINOR=$(LINUX_MAJOR_VER)$(LINUX_MINOR_VER)
|
||||
|
|
|
|||
|
|
@ -87,14 +87,14 @@ endif
|
|||
|
||||
$(EXT2_BASE): host-fakeroot makedevs genext2fs
|
||||
# Use fakeroot to pretend all target binaries are owned by root
|
||||
rm -f $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
|
||||
touch $(PROJECT_BUILD_DIR)/.fakeroot.00000
|
||||
cat $(PROJECT_BUILD_DIR)/.fakeroot* > $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
|
||||
echo "chown -R 0:0 $(TARGET_DIR)" >> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
|
||||
rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
|
||||
touch $(BUILD_DIR)/.fakeroot.00000
|
||||
cat $(BUILD_DIR)/.fakeroot* > $(BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
|
||||
echo "chown -R 0:0 $(TARGET_DIR)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
|
||||
ifneq ($(TARGET_DEVICE_TABLE),)
|
||||
# Use fakeroot to pretend to create all needed device nodes
|
||||
echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
|
||||
>> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
|
||||
>> $(BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
|
||||
endif
|
||||
# Use fakeroot so genext2fs believes the previous fakery
|
||||
ifeq ($(strip $(BR2_TARGET_ROOTFS_EXT2_BLOCKS)),0)
|
||||
|
|
@ -106,14 +106,14 @@ ifeq ($(strip $(BR2_TARGET_ROOTFS_EXT2_BLOCKS)),0)
|
|||
set -x; \
|
||||
echo "$(GENEXT2_DIR)/genext2fs -b $$GENEXT2_SIZE " \
|
||||
"-N $$GENEXT2_INODES -d $(TARGET_DIR) " \
|
||||
"$(EXT2_OPTS) $(EXT2_BASE)" >> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
|
||||
"$(EXT2_OPTS) $(EXT2_BASE)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
|
||||
else
|
||||
echo "$(GENEXT2_DIR)/genext2fs -d $(TARGET_DIR) " \
|
||||
"$(EXT2_OPTS) $(EXT2_BASE)" >> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
|
||||
"$(EXT2_OPTS) $(EXT2_BASE)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
|
||||
endif
|
||||
chmod a+x $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
|
||||
$(HOST_DIR)/usr/bin/fakeroot -- $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
|
||||
-@rm -f $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
|
||||
chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
|
||||
$(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
|
||||
-@rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(EXT2_TARGET))
|
||||
|
||||
ifneq ($(EXT2_ROOTFS_COMPRESSOR),)
|
||||
$(EXT2_BASE).$(EXT2_ROOTFS_COMPRESSOR_EXT): $(EXT2_ROOTFS_COMPRESSOR_PREREQ) $(EXT2_BASE)
|
||||
|
|
|
|||
|
|
@ -18,19 +18,19 @@ $(INITRAMFS_TARGET) initramfs: host-fakeroot makedevs
|
|||
rm -f $(TARGET_DIR)/init
|
||||
ln -s sbin/init $(TARGET_DIR)/init
|
||||
# Use fakeroot to pretend all target binaries are owned by root
|
||||
rm -f $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
touch $(PROJECT_BUILD_DIR)/.fakeroot.00000
|
||||
cat $(PROJECT_BUILD_DIR)/.fakeroot* > $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
echo "chown -R 0:0 $(TARGET_DIR)" >> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
touch $(BUILD_DIR)/.fakeroot.00000
|
||||
cat $(BUILD_DIR)/.fakeroot* > $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
echo "chown -R 0:0 $(TARGET_DIR)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
# Use fakeroot to pretend to create all needed device nodes
|
||||
echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
|
||||
>> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
>> $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
# Use fakeroot so gen_initramfs_list.sh believes the previous fakery
|
||||
echo "$(SHELL) target/initramfs/gen_initramfs_list.sh -u 0 -g 0 $(TARGET_DIR) > $(INITRAMFS_TARGET)" \
|
||||
>> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
chmod a+x $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
$(HOST_DIR)/usr/bin/fakeroot -- $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
-rm -f $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
>> $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
$(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
-rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
|
||||
initramfs-source:
|
||||
|
||||
|
|
|
|||
|
|
@ -60,17 +60,17 @@ $(ISO9660_TARGET): host-fakeroot $(LINUX_KERNEL) $(EXT2_TARGET) grub mkisofs
|
|||
cp $(LINUX_KERNEL) $(ISO9660_TARGET_DIR)/kernel
|
||||
cp $(EXT2_TARGET) $(ISO9660_TARGET_DIR)/initrd
|
||||
# Use fakeroot to pretend all target binaries are owned by root
|
||||
rm -f $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
|
||||
touch $(PROJECT_BUILD_DIR)/.fakeroot.00000
|
||||
cat $(PROJECT_BUILD_DIR)/.fakeroot* > $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
|
||||
echo "chown -R 0:0 $(ISO9660_TARGET_DIR)" >> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
|
||||
rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
|
||||
touch $(BUILD_DIR)/.fakeroot.00000
|
||||
cat $(BUILD_DIR)/.fakeroot* > $(BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
|
||||
echo "chown -R 0:0 $(ISO9660_TARGET_DIR)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
|
||||
# Use fakeroot so mkisofs believes the previous fakery
|
||||
echo "$(MKISOFS_TARGET) -R -b boot/grub/stage2_eltorito -no-emul-boot " \
|
||||
"-boot-load-size 4 -boot-info-table -o $(ISO9660_TARGET) $(ISO9660_TARGET_DIR)" \
|
||||
>> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
|
||||
chmod a+x $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
|
||||
$(HOST_DIR)/usr/bin/fakeroot -- $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
|
||||
-@rm -f $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
|
||||
>> $(BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
|
||||
chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
|
||||
$(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
|
||||
-@rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(ISO9660_TARGET))
|
||||
|
||||
iso9660root: $(ISO9660_TARGET)
|
||||
echo $(ISO9660_TARGET)
|
||||
|
|
|
|||
|
|
@ -46,28 +46,28 @@ endif
|
|||
#
|
||||
$(JFFS2_TARGET): host-fakeroot makedevs mtd-host
|
||||
# Use fakeroot to pretend all target binaries are owned by root
|
||||
rm -f $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
||||
touch $(PROJECT_BUILD_DIR)/.fakeroot.00000
|
||||
cat $(PROJECT_BUILD_DIR)/.fakeroot* > $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
||||
echo "chown -R 0:0 $(TARGET_DIR)" >> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
||||
rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
||||
touch $(BUILD_DIR)/.fakeroot.00000
|
||||
cat $(BUILD_DIR)/.fakeroot* > $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
||||
echo "chown -R 0:0 $(TARGET_DIR)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
||||
ifneq ($(TARGET_DEVICE_TABLE),)
|
||||
# Use fakeroot to pretend to create all needed device nodes
|
||||
echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
|
||||
>> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
||||
>> $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
||||
endif
|
||||
# Use fakeroot so mkfs.jffs2 believes the previous fakery
|
||||
ifneq ($(BR2_TARGET_ROOTFS_JFFS2_SUMMARY),)
|
||||
echo "$(MKFS_JFFS2) $(JFFS2_OPTS) -d $(TARGET_DIR) -o $(JFFS2_TARGET).nosummary && " \
|
||||
"$(SUMTOOL) $(SUMTOOL_OPTS) -i $(JFFS2_TARGET).nosummary -o $(JFFS2_TARGET) && " \
|
||||
"rm $(JFFS2_TARGET).nosummary" \
|
||||
>> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
||||
>> $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
||||
else
|
||||
echo "$(MKFS_JFFS2) $(JFFS2_OPTS) -d $(TARGET_DIR) -o $(JFFS2_TARGET)" \
|
||||
>> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
||||
>> $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
||||
endif
|
||||
chmod a+x $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
||||
$(HOST_DIR)/usr/bin/fakeroot -- $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
||||
-@rm -f $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
||||
chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
||||
$(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
||||
-@rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
||||
@ls -l $(JFFS2_TARGET)
|
||||
ifeq ($(BR2_JFFS2_TARGET_SREC),y)
|
||||
$(TARGET_CROSS)objcopy -I binary -O srec --adjust-vma 0xa1000000 $(JFFS2_TARGET) $(JFFS2_TARGET).srec
|
||||
|
|
|
|||
|
|
@ -69,7 +69,7 @@ LINUX26_KERNEL_NAME=$(BINARIES_DIR)/$(LINUX26_FORMAT)$(ROOTFS_STRIPPED_SUFFIX)
|
|||
endif
|
||||
|
||||
# Version of Linux AFTER patches
|
||||
LINUX26_DIR=$(PROJECT_BUILD_DIR)/linux-$(LINUX26_VERSION)
|
||||
LINUX26_DIR=$(BUILD_DIR)/linux-$(LINUX26_VERSION)
|
||||
|
||||
# for packages that need it
|
||||
LINUX_VERSION:=$(LINUX26_VERSION)
|
||||
|
|
@ -106,10 +106,10 @@ endif # ($(LINUX26_VERSION),$(LINUX_HEADERS_VERSION))
|
|||
$(LINUX26_DIR)/.unpacked: $(DL_DIR)/$(LINUX26_SOURCE)
|
||||
rm -rf $(LINUX26_DIR)
|
||||
@echo "*** Unpacking kernel source"
|
||||
$(LINUX26_BZCAT) $(DL_DIR)/$(LINUX26_SOURCE) | tar -C $(PROJECT_BUILD_DIR) $(TAR_OPTIONS) -
|
||||
$(LINUX26_BZCAT) $(DL_DIR)/$(LINUX26_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
|
||||
ifneq ($(DOWNLOAD_LINUX26_VERSION),$(LINUX26_VERSION))
|
||||
# Rename the dir from the downloaded version to the AFTER patch version
|
||||
mv -f $(PROJECT_BUILD_DIR)/linux-$(DOWNLOAD_LINUX26_VERSION) $(LINUX26_DIR)
|
||||
mv -f $(BUILD_DIR)/linux-$(DOWNLOAD_LINUX26_VERSION) $(LINUX26_DIR)
|
||||
endif
|
||||
touch $@
|
||||
|
||||
|
|
|
|||
|
|
@ -48,7 +48,7 @@ BOARD_PATH:=$(call qstrip,$(BR2_BOARD_PATH))
|
|||
endif
|
||||
|
||||
# Version of Linux AFTER patches
|
||||
LINUX26_DIR:=$(PROJECT_BUILD_DIR)/linux-$(LINUX26_VERSION)
|
||||
LINUX26_DIR:=$(BUILD_DIR)/linux-$(LINUX26_VERSION)
|
||||
|
||||
# for packages that need it
|
||||
LINUX_VERSION:=$(LINUX26_VERSION)
|
||||
|
|
@ -132,7 +132,7 @@ endif
|
|||
# --------------
|
||||
# UIMAGE
|
||||
ifeq ($(LINUX26_FORMAT),uImage)
|
||||
LINUX26_MKIMAGE_DIR:=$(PROJECT_BUILD_DIR)/u-boot-tools
|
||||
LINUX26_MKIMAGE_DIR:=$(BUILD_DIR)/u-boot-tools
|
||||
LINUX26_MKIMAGE_DEP:=$(LINUX26_MKIMAGE_DIR)/mkimage
|
||||
ifeq ($(LINUX26_BINLOC),)
|
||||
LINUX26_BINLOC:=arch/$(KERNEL_ARCH)/boot/$(LINUX26_FORMAT)
|
||||
|
|
@ -200,17 +200,17 @@ endif
|
|||
$(LINUX26_DIR)/.unpacked: $(DL_DIR)/$(LINUX26_SOURCE)
|
||||
rm -rf $(LINUX26_DIR)
|
||||
@echo "*** Unpacking kernel source"
|
||||
$(LINUX26_BZCAT) $(DL_DIR)/$(LINUX26_SOURCE) | tar -C $(PROJECT_BUILD_DIR) $(TAR_OPTIONS) -
|
||||
$(LINUX26_BZCAT) $(DL_DIR)/$(LINUX26_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
|
||||
ifneq ($(DOWNLOAD_LINUX26_VERSION),$(LINUX26_VERSION))
|
||||
# Rename the dir from the downloaded version to the AFTER patch version
|
||||
mv -f $(PROJECT_BUILD_DIR)/linux-$(DOWNLOAD_LINUX26_VERSION) $(LINUX26_DIR)
|
||||
echo $(LINUX26_VERSION_PROBED) > $(PROJECT_BUILD_DIR)/.linux-version
|
||||
mv -f $(BUILD_DIR)/linux-$(DOWNLOAD_LINUX26_VERSION) $(LINUX26_DIR)
|
||||
echo $(LINUX26_VERSION_PROBED) > $(BUILD_DIR)/.linux-version
|
||||
endif
|
||||
touch $@
|
||||
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
LINUX26_TARGETS+=$(LINUX26_KERNEL) $(PROJECT_BUILD_DIR)/.linux-version
|
||||
LINUX26_TARGETS+=$(LINUX26_KERNEL) $(BUILD_DIR)/.linux-version
|
||||
|
||||
ifeq ($(BR2_LINUX_COPYTO_ROOTFS),y)
|
||||
LINUX26_TARGETS+=$(TARGET_DIR)/boot/$(LINUX26_KERNEL_NAME)
|
||||
|
|
@ -381,7 +381,7 @@ $(LINUX26_KERNEL): $(LINUX26_DIR)/$(LINUX26_BINLOC)
|
|||
touch $@
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
$(PROJECT_BUILD_DIR)/autotools-stamps/linux_modules_target_installed: $(LINUX26_DIR)/.depend_done
|
||||
$(STAMP_DIR)/linux_modules_target_installed: $(LINUX26_DIR)/.depend_done
|
||||
rm -rf $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION_PROBED)
|
||||
rm -f $(TARGET_DIR)/sbin/cardmgr
|
||||
# Make Linux depend on modules only if enabled in the .config.
|
||||
|
|
@ -441,8 +441,8 @@ $(LINUX_COPYTO)/$(LINUX26_KERNEL_NAME): $(LINUX26_KERNEL)
|
|||
touch $@
|
||||
endif
|
||||
|
||||
$(PROJECT_BUILD_DIR)/.linux-version: $(LINUX26_KERNEL)
|
||||
echo $(LINUX26_VERSION_PROBED) > $(PROJECT_BUILD_DIR)/.linux-version
|
||||
$(BUILD_DIR)/.linux-version: $(LINUX26_KERNEL)
|
||||
echo $(LINUX26_VERSION_PROBED) > $(BUILD_DIR)/.linux-version
|
||||
echo LINUX_MODULES=`$(LINUX26_VERSION_PROBED)`
|
||||
|
||||
$(LINUX26_MKIMAGE_DIR)/mkimage: $(U_BOOT_TOOLS)
|
||||
|
|
@ -451,9 +451,9 @@ $(LINUX26_MKIMAGE_DIR)/mkimage: $(U_BOOT_TOOLS)
|
|||
|
||||
linux26: $(LINUX26_TARGETS)
|
||||
|
||||
linux26-version: $(PROJECT_BUILD_DIR)/.linux-version
|
||||
linux26-version: $(BUILD_DIR)/.linux-version
|
||||
|
||||
linux26-modules: cross-depmod26 $(PROJECT_BUILD_DIR)/autotools-stamps/linux_modules_target_installed
|
||||
linux26-modules: cross-depmod26 $(STAMP_DIR)/linux_modules_target_installed
|
||||
|
||||
linux26-source: $(DL_DIR)/$(LINUX26_SOURCE)
|
||||
|
||||
|
|
@ -470,7 +470,7 @@ linux26-force:
|
|||
|
||||
# This has been renamed so we do _NOT_ by default run this on 'make clean'
|
||||
linux26clean:
|
||||
rm -f $(PROJECT_BUILD_DIR)/autotools-stamps/linux_modules_target_installed
|
||||
rm -f $(STAMP_DIR)/linux_modules_target_installed
|
||||
rm -f $(LINUX26_KERNEL) $(LINUX26_DIR)/.configured
|
||||
-$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX26_DIR) clean
|
||||
|
||||
|
|
@ -531,7 +531,7 @@ linux-status:
|
|||
@echo LINUX26_TARGETS=$(LINUX26_TARGETS)
|
||||
@echo LINUX26_VERSION=$(LINUX26_VERSION)
|
||||
@echo LINUX26_MAKE_FLAGS=$(LINUX26_MAKE_FLAGS)
|
||||
@echo PROJECT_BUILD_DIR=$(PROJECT_BUILD_DIR)
|
||||
@echo BUILD_DIR=$(BUILD_DIR)
|
||||
@echo TARGETS=$(TARGETS)
|
||||
|
||||
endif
|
||||
|
|
|
|||
|
|
@ -38,20 +38,20 @@ ROMFS_TARGET=$(IMAGE).romfs
|
|||
|
||||
romfsroot: host-fakeroot makedevs romfs
|
||||
# Use fakeroot to pretend all target binaries are owned by root
|
||||
rm -f $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
|
||||
touch $(PROJECT_BUILD_DIR)/.fakeroot.00000
|
||||
cat $(PROJECT_BUILD_DIR)/.fakeroot* > $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
|
||||
echo "chown -R 0:0 $(TARGET_DIR)" >> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
|
||||
rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
|
||||
touch $(BUILD_DIR)/.fakeroot.00000
|
||||
cat $(BUILD_DIR)/.fakeroot* > $(BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
|
||||
echo "chown -R 0:0 $(TARGET_DIR)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
|
||||
ifneq ($(TARGET_DEVICE_TABLE),)
|
||||
# Use fakeroot to pretend to create all needed device nodes
|
||||
echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
|
||||
>> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
|
||||
>> $(BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
|
||||
endif
|
||||
# Use fakeroot so genromfs believes the previous fakery
|
||||
echo "$(ROMFS_DIR)/genromfs -d $(TARGET_DIR) -f $(ROMFS_TARGET)" >> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
|
||||
chmod a+x $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
|
||||
$(HOST_DIR)/usr/bin/fakeroot -- $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
|
||||
-@rm -f $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
|
||||
echo "$(ROMFS_DIR)/genromfs -d $(TARGET_DIR) -f $(ROMFS_TARGET)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
|
||||
chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
|
||||
$(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
|
||||
-@rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(ROMFS_TARGET))
|
||||
|
||||
romfsroot-source: romfs-source
|
||||
|
||||
|
|
|
|||
|
|
@ -48,24 +48,24 @@ SQUASHFS_TARGET:=$(IMAGE).squashfs
|
|||
|
||||
squashfsroot: host-fakeroot makedevs squashfs
|
||||
# Use fakeroot to pretend all target binaries are owned by root
|
||||
rm -f $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
|
||||
touch $(PROJECT_BUILD_DIR)/.fakeroot.00000
|
||||
cat $(PROJECT_BUILD_DIR)/.fakeroot* > $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
|
||||
echo "chown -R 0:0 $(TARGET_DIR)" >> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
|
||||
rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
|
||||
touch $(BUILD_DIR)/.fakeroot.00000
|
||||
cat $(BUILD_DIR)/.fakeroot* > $(BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
|
||||
echo "chown -R 0:0 $(TARGET_DIR)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
|
||||
ifneq ($(TARGET_DEVICE_TABLE),)
|
||||
# Use fakeroot to pretend to create all needed device nodes
|
||||
echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
|
||||
>> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
|
||||
>> $(BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
|
||||
endif
|
||||
# Use fakeroot so mksquashfs believes the previous fakery
|
||||
echo "$(SQUASHFS_DIR)/squashfs-tools/mksquashfs " \
|
||||
"$(TARGET_DIR) $(SQUASHFS_TARGET) " \
|
||||
"-noappend $(SQUASHFS_ENDIANNESS)" \
|
||||
>> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
|
||||
chmod a+x $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
|
||||
$(HOST_DIR)/usr/bin/fakeroot -- $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
|
||||
>> $(BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
|
||||
chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
|
||||
$(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
|
||||
chmod 0644 $(SQUASHFS_TARGET)
|
||||
-@rm -f $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
|
||||
-@rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(SQUASHFS_TARGET))
|
||||
|
||||
squashfsroot-source: squashfs-source
|
||||
|
||||
|
|
|
|||
|
|
@ -25,20 +25,20 @@ ROOTFS_TAR_COPYTO:=$(call qstrip,$(BR2_TARGET_ROOTFS_TAR_COPYTO))
|
|||
|
||||
tarroot: host-fakeroot makedevs
|
||||
# Use fakeroot to pretend all target binaries are owned by root
|
||||
rm -f $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
touch $(PROJECT_BUILD_DIR)/.fakeroot.00000
|
||||
cat $(PROJECT_BUILD_DIR)/.fakeroot* > $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
echo "chown -R 0:0 $(TARGET_DIR)" >> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
touch $(BUILD_DIR)/.fakeroot.00000
|
||||
cat $(BUILD_DIR)/.fakeroot* > $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
echo "chown -R 0:0 $(TARGET_DIR)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
ifneq ($(TARGET_DEVICE_TABLE),)
|
||||
# Use fakeroot to pretend to create all needed device nodes
|
||||
echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
|
||||
>> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
>> $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
endif
|
||||
# Use fakeroot so tar believes the previous fakery
|
||||
echo "tar -c$(TAR_OPTS)f $(TAR_TARGET) -C $(TARGET_DIR) ." \
|
||||
>> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
chmod a+x $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
$(HOST_DIR)/usr/bin/fakeroot -- $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
>> $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
$(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
ifneq ($(TAR_COMPRESSOR),)
|
||||
-rm -f $(TAR_TARGET).$()
|
||||
PATH="$(STAGING_DIR)/sbin:$(STAGING_DIR)/bin:$(STAGING_DIR)/usr/sbin:$(STAGING_DIR)/usr/bin:$(PATH)" $(TAR_COMPRESSOR) $(TAR_TARGET) > $(TAR_TARGET).$(TAR_COMPRESSOR_EXT)
|
||||
|
|
@ -46,7 +46,7 @@ endif
|
|||
ifneq ($(ROOTFS_TAR_COPYTO),)
|
||||
$(Q)cp -f $(TAR_TARGET) $(ROOTFS_TAR_COPYTO)
|
||||
endif
|
||||
-@rm -f $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
-@rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
|
||||
|
||||
tarroot-source:
|
||||
|
||||
|
|
|
|||
|
|
@ -8,11 +8,11 @@ U_BOOT_VERSION:=$(call qstrip,$(BR2_UBOOT_VERSION))
|
|||
U_BOOT_SOURCE:=u-boot-$(U_BOOT_VERSION).tar.bz2
|
||||
|
||||
U_BOOT_SITE:=$(call qstrip,$(BR2_U_BOOT_SITE))
|
||||
U_BOOT_DIR:=$(PROJECT_BUILD_DIR)/u-boot-$(U_BOOT_VERSION)
|
||||
U_BOOT_PATCH_DIR:=$(PROJECT_BUILD_DIR)/u-boot-$(U_BOOT_VERSION)-patches
|
||||
U_BOOT_DIR:=$(BUILD_DIR)/u-boot-$(U_BOOT_VERSION)
|
||||
U_BOOT_PATCH_DIR:=$(BUILD_DIR)/u-boot-$(U_BOOT_VERSION)-patches
|
||||
U_BOOT_CAT:=$(BZCAT)
|
||||
U_BOOT_BIN:=u-boot.bin
|
||||
U_BOOT_TARGET_BIN:=$(PROJECT)-u-boot-$(U_BOOT_VERSION)-$(DATE).bin
|
||||
U_BOOT_TARGET_BIN:=u-boot-$(U_BOOT_VERSION)-$(DATE).bin
|
||||
|
||||
U_BOOT_TOOLS_BIN:=mkimage
|
||||
U_BOOT_TOOLS:=$(STAGING_DIR)/usr/bin/$(U_BOOT_TOOLS_BIN)
|
||||
|
|
@ -66,7 +66,7 @@ $(DL_DIR)/$(U_BOOT_SOURCE):
|
|||
|
||||
$(U_BOOT_DIR)/.unpacked: $(DL_DIR)/$(U_BOOT_SOURCE)
|
||||
$(U_BOOT_CAT) $(DL_DIR)/$(U_BOOT_SOURCE) \
|
||||
| tar -C $(PROJECT_BUILD_DIR) $(TAR_OPTIONS) -
|
||||
| tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
|
||||
mkdir -p $(U_BOOT_DIR)
|
||||
touch $@
|
||||
|
||||
|
|
@ -102,9 +102,6 @@ ifdef BR2_TARGET_UBOOT_DEFAULT_ENV
|
|||
@echo "#define __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
|
||||
$(call insert_define, DATE, $(DATE))
|
||||
$(call insert_define, CONFIG_LOAD_SCRIPTS, 1)
|
||||
ifneq ($(strip $(BR2_PROJECT)),"")
|
||||
$(call insert_define, CONFIG_HOSTNAME, $(BR2_PROJECT))
|
||||
endif
|
||||
endif # BR2_TARGET_UBOOT_DEFAULT_ENV
|
||||
ifdef BR2_TARGET_UBOOT_NETWORK
|
||||
ifneq ($(strip $(BR2_TARGET_UBOOT_IPADDR)),"")
|
||||
|
|
@ -194,7 +191,7 @@ $(TARGET_DIR)/usr/sbin/fw_printenv: $(U_BOOT_DIR)/$(U_BOOT_BIN)
|
|||
|
||||
u-boot: $(U_BOOT_TARGETS)
|
||||
|
||||
u-boot-autoscript: $(U_BOOT_AUTOSCRIPT).$(PROJECT)
|
||||
u-boot-autoscript: $(U_BOOT_AUTOSCRIPT).img
|
||||
|
||||
u-boot-clean:
|
||||
-$(MAKE) -C $(U_BOOT_DIR) clean
|
||||
|
|
@ -249,7 +246,7 @@ endif
|
|||
echo setargs >> $(U_BOOT_AUTOSCRIPT)
|
||||
echo saveenv >> $(U_BOOT_AUTOSCRIPT)
|
||||
|
||||
$(U_BOOT_AUTOSCRIPT).$(PROJECT): $(U_BOOT_AUTOSCRIPT) $(MKIMAGE)
|
||||
$(U_BOOT_AUTOSCRIPT).img: $(U_BOOT_AUTOSCRIPT) $(MKIMAGE)
|
||||
$(MKIMAGE) -A $(ARCH) \
|
||||
-O linux \
|
||||
-T script \
|
||||
|
|
@ -258,7 +255,7 @@ $(U_BOOT_AUTOSCRIPT).$(PROJECT): $(U_BOOT_AUTOSCRIPT) $(MKIMAGE)
|
|||
-e 0 \
|
||||
-n "autoscr config" \
|
||||
-d $(U_BOOT_AUTOSCRIPT) \
|
||||
$(U_BOOT_AUTOSCRIPT).$(PROJECT)
|
||||
$(U_BOOT_AUTOSCRIPT).img
|
||||
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -77,21 +77,21 @@ endif
|
|||
|
||||
$(UBIFS_BASE): host-fakeroot makedevs mkfs.ubifs
|
||||
# Use fakeroot to pretend all target binaries are owned by root
|
||||
rm -f $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
|
||||
touch $(PROJECT_BUILD_DIR)/.fakeroot.00000
|
||||
cat $(PROJECT_BUILD_DIR)/.fakeroot* > $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
|
||||
echo "chown -R 0:0 $(TARGET_DIR)" >> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
|
||||
rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
|
||||
touch $(BUILD_DIR)/.fakeroot.00000
|
||||
cat $(BUILD_DIR)/.fakeroot* > $(BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
|
||||
echo "chown -R 0:0 $(TARGET_DIR)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
|
||||
ifneq ($(TARGET_DEVICE_TABLE),)
|
||||
# Use fakeroot to pretend to create all needed device nodes
|
||||
echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
|
||||
>> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
|
||||
>> $(BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
|
||||
endif
|
||||
# Use fakeroot so mkfs.ubifs believes the previous fakery
|
||||
echo "$(MKFS_UBIFS_DIR)/mkfs.ubifs -d $(TARGET_DIR) " \
|
||||
"$(UBIFS_OPTS) -o $(UBIFS_BASE)" >> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
|
||||
chmod a+x $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
|
||||
$(HOST_DIR)/usr/bin/fakeroot -- $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
|
||||
-@rm -f $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
|
||||
"$(UBIFS_OPTS) -o $(UBIFS_BASE)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
|
||||
chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
|
||||
$(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
|
||||
-@rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(UBIFS_TARGET))
|
||||
|
||||
ifneq ($(UBIFS_ROOTFS_COMPRESSOR),)
|
||||
$(UBIFS_BASE).$(UBIFS_ROOTFS_COMPRESSOR_EXT): $(UBIFS_ROOTFS_COMPRESSOR_PREREQ) $(UBIFS_BASE)
|
||||
|
|
|
|||
|
|
@ -324,7 +324,7 @@ endif
|
|||
mkdir -p $(TARGET_DIR)/usr/lib $(TARGET_DIR)/usr/sbin
|
||||
touch $@
|
||||
|
||||
$(PROJECT_BUILD_DIR)/autotools-stamps/gcc_libs_target_installed: $(GCC_BUILD_DIR2)/.installed
|
||||
$(STAMP_DIR)/gcc_libs_target_installed: $(GCC_BUILD_DIR2)/.installed
|
||||
ifeq ($(BR2_GCC_SHARED_LIBGCC),y)
|
||||
# These are in /lib, so...
|
||||
rm -rf $(TARGET_DIR)/usr/lib/libgcc_s*.so*
|
||||
|
|
@ -354,7 +354,7 @@ endif
|
|||
|
||||
cross_compiler:=$(STAGING_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-gcc
|
||||
cross_compiler gcc: gcc-config $(GCC_BUILD_DIR2)/.installed \
|
||||
$(PROJECT_BUILD_DIR)/autotools-stamps/gcc_libs_target_installed \
|
||||
$(STAMP_DIR)/gcc_libs_target_installed \
|
||||
$(GCC_TARGETS)
|
||||
|
||||
gcc-source: $(DL_DIR)/$(GCC_SOURCE)
|
||||
|
|
@ -379,7 +379,7 @@ gcc-dirclean: gcc_initial-dirclean
|
|||
#############################################################
|
||||
GCC_BUILD_DIR3:=$(BUILD_DIR)/gcc-$(GCC_VERSION)-target
|
||||
|
||||
$(GCC_BUILD_DIR3)/.prepared: $(PROJECT_BUILD_DIR)/autotools-stamps/gcc_libs_target_installed $(GCC_TARGET_PREREQ)
|
||||
$(GCC_BUILD_DIR3)/.prepared: $(STAMP_DIR)/gcc_libs_target_installed $(GCC_TARGET_PREREQ)
|
||||
mkdir -p $(GCC_BUILD_DIR3)
|
||||
touch $@
|
||||
|
||||
|
|
|
|||
|
|
@ -352,7 +352,7 @@ endif
|
|||
mkdir -p $(TARGET_DIR)/usr/lib $(TARGET_DIR)/usr/sbin
|
||||
touch $@
|
||||
|
||||
$(PROJECT_BUILD_DIR)/autotools-stamps/gcc_libs_target_installed: $(GCC_BUILD_DIR2)/.installed
|
||||
$(STAMP_DIR)/gcc_libs_target_installed: $(GCC_BUILD_DIR2)/.installed
|
||||
ifeq ($(BR2_GCC_SHARED_LIBGCC),y)
|
||||
# These are in /lib, so...
|
||||
rm -rf $(TARGET_DIR)/usr/lib/libgcc_s*.so*
|
||||
|
|
@ -381,7 +381,7 @@ endif
|
|||
cross_compiler:=$(STAGING_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-gcc
|
||||
cross_compiler gcc: uclibc-configured binutils gcc_initial \
|
||||
$(LIBFLOAT_TARGET) uclibc $(GCC_BUILD_DIR2)/.installed \
|
||||
$(PROJECT_BUILD_DIR)/autotools-stamps/gcc_libs_target_installed \
|
||||
$(STAMP_DIR)/gcc_libs_target_installed \
|
||||
$(GCC_TARGETS)
|
||||
|
||||
gcc-source: $(DL_DIR)/$(GCC_SOURCE)
|
||||
|
|
@ -403,7 +403,7 @@ gcc-dirclean: gcc_initial-dirclean
|
|||
#############################################################
|
||||
GCC_BUILD_DIR3:=$(BUILD_DIR)/gcc-$(GCC_VERSION)-target
|
||||
|
||||
$(GCC_BUILD_DIR3)/.prepared: $(PROJECT_BUILD_DIR)/autotools-stamps/gcc_libs_target_installed $(GCC_TARGET_PREREQ)
|
||||
$(GCC_BUILD_DIR3)/.prepared: $(STAMP_DIR)/gcc_libs_target_installed $(GCC_TARGET_PREREQ)
|
||||
mkdir -p $(GCC_BUILD_DIR3)
|
||||
touch $@
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue