diff --git a/target/device/Atmel/arch-avr32/kernel-patches-2.6.22.1/linux-2.6.22.1-008-atmel-gpio_mouse-setup-for-atstk1000-board.patch b/target/device/Atmel/arch-avr32/kernel-patches-2.6.22.1/linux-2.6.22.1-008-atmel-gpio_mouse-setup-for-atstk1000-board.patch
deleted file mode 100644
index 5683be6f3..000000000
--- a/target/device/Atmel/arch-avr32/kernel-patches-2.6.22.1/linux-2.6.22.1-008-atmel-gpio_mouse-setup-for-atstk1000-board.patch
+++ /dev/null
@@ -1,130 +0,0 @@
->From 9c5fa914202d20756c56e0c4fd76035ed8f8ced8 Mon Sep 17 00:00:00 2001
-From: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
-Date: Mon, 6 Aug 2007 08:31:14 +0200
-Subject: [PATCH 1/1] Add gpio_mouse board setup to atstk1000 board
-
-This patch adds a gpio_mouse_platform_data to the atstk1000 board code and
-registers a gpio_mouse platform_device. This will enable a GPIO mouse on header
-J1 on GPIO of the ATSTK1000 development kit. The board code is enabled/disabled
-in menuconfig.
-
-By connecting J1 (GPIO) to J25 (SWITCH) you can use the following keys to
-simulate a mouse:
-
-SW0: right
-SW1: down
-SW2: up
-SW3: left
-SW5: right button
-SW6: middle button
-SW7: left button
-
-Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
----
- arch/avr32/boards/atstk1000/Kconfig     |   16 ++++++++++
- arch/avr32/boards/atstk1000/atstk1002.c |   48 +++++++++++++++++++++++++++++++
- 2 files changed, 64 insertions(+), 0 deletions(-)
-
-diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
-index 718578f..d99d4bd 100644
---- a/arch/avr32/boards/atstk1000/Kconfig
-+++ b/arch/avr32/boards/atstk1000/Kconfig
-@@ -50,6 +50,22 @@ config BOARD_ATSTK1002_SPI1
- 	  GPIO lines and accessed through the J1 jumper block.  Say "y"
- 	  here to configure that SPI controller.
- 
-+config BOARD_ATSTK1002_GPIO_MOUSE
-+	bool "Configure gpio_mouse on GPIO J1 header"
-+	depends on !BOARD_ATSTK1002_SW4_CUSTOM
-+	help
-+	  Enable gpio_mouse board configuration on GPIO 0 to 7. Connecting a
-+	  10-pin flat cable from J1 (GPIO) to J25 (SWITCH) will let a user give
-+	  mouse inputs using the the switches SW0 to SW7.
-+
-+	  SW0: right
-+	  SW1: down
-+	  SW2: up
-+	  SW3: left
-+	  SW5: right button
-+	  SW6: middle button
-+	  SW7: left button
-+
- config BOARD_ATSTK1002_J2_LED
- 	bool
- 	default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB
-diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
-index c958fd4..c7560e5 100644
---- a/arch/avr32/boards/atstk1000/atstk1002.c
-+++ b/arch/avr32/boards/atstk1000/atstk1002.c
-@@ -17,6 +17,7 @@
- #include <linux/types.h>
- #include <linux/spi/spi.h>
- #include <linux/spi/at73c213.h>
-+#include <linux/gpio_mouse.h>
- 
- #include <video/atmel_lcdc.h>
- 
-@@ -91,6 +92,49 @@ static struct mci_platform_data __initdata mci0_data = {
- 	.wp_pin		= GPIO_PIN_NONE,
- };
- 
-+#ifdef CONFIG_BOARD_ATSTK1002_GPIO_MOUSE
-+static struct gpio_mouse_platform_data gpio_mouse0_data = {
-+	.polarity	= GPIO_MOUSE_POLARITY_ACT_LOW,
-+	{
-+		{
-+			.up		= GPIO_PIN_PB(2),
-+			.down		= GPIO_PIN_PB(1),
-+			.left		= GPIO_PIN_PB(3),
-+			.right		= GPIO_PIN_PB(0),
-+			.bleft		= GPIO_PIN_PB(7),
-+			.bmiddle	= GPIO_PIN_PB(6),
-+			.bright		= GPIO_PIN_PB(5),
-+		},
-+	},
-+	.scan_ms	= 10,
-+};
-+
-+static struct platform_device gpio_mouse0_device = {
-+	.name		= "gpio_mouse",
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data = &gpio_mouse0_data,
-+	},
-+};
-+
-+static void __init add_device_gpio_mouse0(void)
-+{
-+	struct platform_device *pdev = &gpio_mouse0_device;
-+	struct gpio_mouse_platform_data *data = pdev->dev.platform_data;
-+
-+	at32_select_gpio(data->up, 0);
-+	at32_select_gpio(data->down, 0);
-+	at32_select_gpio(data->left, 0);
-+	at32_select_gpio(data->right, 0);
-+
-+	at32_select_gpio(data->bleft, 0);
-+	at32_select_gpio(data->bmiddle, 0);
-+	at32_select_gpio(data->bright, 0);
-+
-+	platform_device_register(pdev);
-+}
-+#endif
-+
- /*
-  * The next two functions should go away as the boot loader is
-  * supposed to initialize the macb address registers with a valid
-@@ -317,6 +361,10 @@ static int __init atstk1002_init(void)
- #endif
- #endif
- 
-+#ifdef CONFIG_BOARD_ATSTK1002_GPIO_MOUSE
-+	add_device_gpio_mouse0();
-+#endif
-+
- 	return 0;
- }
- postcore_initcall(atstk1002_init);
--- 
-1.5.2.3
-
diff --git a/target/device/Atmel/arch-avr32/kernel-patches-2.6.22.1/linux-2.6.22.1-003-atmel.3-avr32-updates.patch b/target/device/Atmel/linux/kernel-patches-2.6.22.1/linux-2.6.22.1-001-at91+avr32.patch
similarity index 56%
rename from target/device/Atmel/arch-avr32/kernel-patches-2.6.22.1/linux-2.6.22.1-003-atmel.3-avr32-updates.patch
rename to target/device/Atmel/linux/kernel-patches-2.6.22.1/linux-2.6.22.1-001-at91+avr32.patch
index 9da7547b3..adc8189a6 100644
--- a/target/device/Atmel/arch-avr32/kernel-patches-2.6.22.1/linux-2.6.22.1-003-atmel.3-avr32-updates.patch
+++ b/target/device/Atmel/linux/kernel-patches-2.6.22.1/linux-2.6.22.1-001-at91+avr32.patch
@@ -1,8 +1,2729 @@
-diff --git a/MAINTAINERS b/MAINTAINERS
-index df40a4e..3c5cfef 100644
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -674,6 +674,13 @@ P:	Haavard Skinnemoen
+Index: linux-2.6.22.1/include/asm-arm/arch-at91/at91sam9260_matrix.h
+===================================================================
+--- linux-2.6.22.1/include/asm-arm/arch-at91/at91sam9260_matrix.h	(revision 1)
++++ linux-2.6.22.1/include/asm-arm/arch-at91/at91sam9260_matrix.h	(arbetskopia)
+@@ -67,7 +67,7 @@
+ #define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+ #define			AT91_MATRIX_CS4A_SMC		(0 << 4)
+ #define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
+-#define		AT91_MATRIX_CS5A		(1 << 5 )	/* Chip Select 5 Assignment */
++#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+ #define			AT91_MATRIX_CS5A_SMC		(0 << 5)
+ #define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
+ #define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+Index: linux-2.6.22.1/include/asm-arm/arch-at91/ics1523.h
+===================================================================
+--- linux-2.6.22.1/include/asm-arm/arch-at91/ics1523.h	(revision 0)
++++ linux-2.6.22.1/include/asm-arm/arch-at91/ics1523.h	(revision 0)
+@@ -0,0 +1,154 @@
++//*----------------------------------------------------------------------------
++//*         ATMEL Microcontroller Software Support  -  ROUSSET  -
++//*----------------------------------------------------------------------------
++//* The software is delivered "AS IS" without warranty or condition of any
++//* kind, either express, implied or statutory. This includes without
++//* limitation any warranty or condition with respect to merchantability or
++//* fitness for any particular purpose, or against the infringements of
++//* intellectual property rights of others.
++//*----------------------------------------------------------------------------
++//* File Name           : ics1523.h
++//* Object              : Clock Generator Prototyping File.
++//*
++//* 1.0 08/28/02 ED     : Creation
++//* 1.2 13/01/03 FB		: Update on lib V3
++//*----------------------------------------------------------------------------
++
++#ifndef ics1523_h
++#define ics1523_h
++
++/*-------------------------------------------*/
++/* ICS1523 TWI Serial Clock Definition       */
++/*-------------------------------------------*/
++
++#define		ICS_MIN_CLOCK		100		/* Min Frequency Access Clock KHz */
++#define		ICS_MAX_CLOCK		400		/* Max Frequency Access Clock KHz */
++#define		ICS_TRANSFER_RATE	ICS_MAX_CLOCK	/* Transfer speed to apply */
++
++#define		ICS_WRITE_CLK_PNB	30		/* TWCK Clock Periods required to write */
++#define		ICS_READ_CLK_PNB	40		/* TWCK Clock Periods required to read */
++
++/*-------------------------------------------*/
++/* ICS1523 Write Operation Definition        */
++/*-------------------------------------------*/
++
++#define		ICS1523_ACCESS_OK	0		/* OK */
++#define		ICS1523_ACCESS_ERROR	-1		/* NOK */
++
++/*-------------------------------------------*/
++/* ICS1523 Device Addresses Definition       */
++/*-------------------------------------------*/
++
++#define		ICS_ADDR		0x26		/* Device Address */
++
++/*--------------------------------------------------*/
++/* ICS1523 Registers Internal Addresses Definition  */
++/*--------------------------------------------------*/
++
++#define		ICS_ICR			0x0		/* Input Control Register */
++#define		ICS_LCR			0x1		/* Loop Control Register */
++#define		ICS_FD0			0x2		/* PLL FeedBack Divider LSBs */
++#define		ICS_FD1			0x3		/* PLL FeedBack Divider MSBs */
++#define		ICS_DPAO		0x4		/* Dynamic Phase Aligner Offset */
++#define		ICS_DPAC		0x5		/* Dynamic Phase Aligner Resolution */
++#define		ICS_OE			0x6		/* Output Enables Register */
++#define		ICS_OD			0x7		/* Osc Divider Register */
++#define		ICS_SWRST		0x8		/* DPA & PLL Reset Register */
++#define		ICS_VID			0x10		/* Chip Version Register */
++#define		ICS_RID			0x11		/* Chip Revision Register */
++#define		ICS_SR			0x12		/* Status Register */
++
++/*------------------------------------------------------*/
++/* ICS1523 Input Control Register Bits Definition       */
++/*------------------------------------------------------*/
++
++#define		ICS_PDEN		0x1		/* Phase Detector Enable */
++#define		ICS_PDPOL		0x2		/* Phase Detector Enable Polarity */
++#define		ICS_REFPOL		0x4		/* External Reference Polarity */
++#define		ICS_FBKPOL		0x8		/* External Feedback Polarity */
++#define		ICS_FBKSEL		0x10		/* External Feedback Select */
++#define		ICS_FUNCSEL		0x20		/* Function Out Select */
++#define		ICS_ENPLS		0x40		/* Enable PLL Lock/Ref Status Output */
++#define		ICS_ENDLS		0x80		/* Enable DPA Lock/Ref Status Output */
++
++/*-----------------------------------------------------*/
++/* ICS1523 Loop Control Register Bits Definition       */
++/*-----------------------------------------------------*/
++
++#define		ICS_PFD			0x7		/* Phase Detector Gain */
++#define		ICS_PSD			0x30		/* Post-Scaler Divider */
++
++/*----------------------------------------------------*/
++/* ICS1523 PLL FeedBack Divider LSBs Definition       */
++/*----------------------------------------------------*/
++
++#define		ICS_FBDL		0xFF		/* PLL FeedBack Divider LSBs */
++
++/*----------------------------------------------------*/
++/* ICS1523 PLL FeedBack Divider MSBs Definition       */
++/*----------------------------------------------------*/
++
++#define		ICS_FBDM		0xF		/* PLL FeedBack Divider MSBs */
++
++/*------------------------------------------------------------*/
++/* ICS1523 Dynamic Phase Aligner Offset Bits Definition       */
++/*------------------------------------------------------------*/
++
++#define		ICS_DPAOS		0x2F		/* Dynamic Phase Aligner Offset */
++#define		ICS_FILSEL		0x80		/* Loop Filter Select */
++
++/*----------------------------------------------------------------*/
++/* ICS1523 Dynamic Phase Aligner Resolution Bits Definition       */
++/*----------------------------------------------------------------*/
++
++#define		ICS_DPARES		0x3		/* Dynamic Phase Aligner Resolution */
++#define		ICS_MMREV		0xFC		/* Metal Mask Revision Number */
++
++/*-------------------------------------------------------*/
++/* ICS1523 Output Enables Register Bits Definition       */
++/*-------------------------------------------------------*/
++
++#define		ICS_OEPCK		0x1		/* Output Enable for PECL PCLK Outputs */
++#define		ICS_OETCK		0x2		/* Output Enable for STTL CLK Output */
++#define		ICS_OEP2		0x4		/* Output Enable for PECL CLK/2 Outputs */
++#define		ICS_OET2		0x8		/* Output Enable for STTL CLK/2 Output */
++#define		ICS_OEF			0x10		/* Output Enable for STTL FUNC Output */
++#define		ICS_CLK2INV		0x20		/* CLK/2 Invert */
++#define		ICS_OSCL		0xC0		/* SSTL Clock Scaler */
++
++/*----------------------------------------------------*/
++/* ICS1523 Osc Divider Register Bits Definition       */
++/*----------------------------------------------------*/
++
++#define		ICS_OSCDIV		0x7F		/* Oscillator Divider Modulus */
++#define		ICS_INSEL		0x80		/* Input Select */
++
++/*---------------------------------------------------*/
++/* ICS1523 DPA & PLL Reset Register Definition       */
++/*---------------------------------------------------*/
++
++#define		ICS_DPAR		0x0A		/* DPA Reset Command */
++#define		ICS_PLLR		0x50		/* PLL Reset Command */
++
++/*------------------------------------------------*/
++/* ICS1523 Chip Version Register Definition       */
++/*------------------------------------------------*/
++
++#define		ICS_CHIPV		0xFF		/* Chip Version */
++
++/*-------------------------------------------------*/
++/* ICS1523 Chip Revision Register Definition       */
++/*-------------------------------------------------*/
++
++#define		ICS_CHIPR		0xFF		/* Chip Revision */
++
++/*------------------------------------------*/
++/* ICS1523 Status Register Definition       */
++/*------------------------------------------*/
++
++#define		ICS_DPALOCK		0x1		/* DPA Lock Status */
++#define		ICS_PLLLOCK		0x2		/* PLL Lock Status */
++
++int at91_ics1523_init(void);
++
++#endif /* ics1523_h */
+Index: linux-2.6.22.1/include/asm-arm/arch-at91/spi.h
+===================================================================
+--- linux-2.6.22.1/include/asm-arm/arch-at91/spi.h	(revision 0)
++++ linux-2.6.22.1/include/asm-arm/arch-at91/spi.h	(revision 0)
+@@ -0,0 +1,54 @@
++/*
++ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200
++ *
++ * (c) SAN People (Pty) Ltd
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#ifndef AT91_LEGACY_SPI_H
++#define AT91_LEGACY_SPI_H
++
++#define SPI_MAJOR		153	/* registered device number */
++
++#define DEFAULT_SPI_CLK		6000000
++
++
++/* Maximum number of buffers in a single SPI transfer.
++ *  DataFlash uses maximum of 2
++ *  spidev interface supports up to 8.
++ */
++#define MAX_SPI_TRANSFERS	8
++#define NR_SPI_DEVICES		4	/* number of devices on SPI bus */
++
++/*
++ * Describes the buffers for a SPI transfer.
++ * A transmit & receive buffer must be specified for each transfer
++ */
++struct spi_transfer_list {
++	void* tx[MAX_SPI_TRANSFERS];	/* transmit */
++	int txlen[MAX_SPI_TRANSFERS];
++	void* rx[MAX_SPI_TRANSFERS];	/* receive */
++	int rxlen[MAX_SPI_TRANSFERS];
++	int nr_transfers;		/* number of transfers */
++	int curr;			/* current transfer */
++};
++
++struct spi_local {
++	unsigned int pcs;		/* Peripheral Chip Select value */
++
++	struct spi_transfer_list *xfers;	/* current transfer list */
++	dma_addr_t tx, rx;		/* DMA address for current transfer */
++	dma_addr_t txnext, rxnext;	/* DMA address for next transfer */
++};
++
++
++/* Exported functions */
++extern void spi_access_bus(short device);
++extern void spi_release_bus(short device);
++extern int spi_transfer(struct spi_transfer_list* list);
++
++#endif
+Index: linux-2.6.22.1/include/asm-arm/arch-at91/at91_mci.h
+===================================================================
+--- linux-2.6.22.1/include/asm-arm/arch-at91/at91_mci.h	(revision 1)
++++ linux-2.6.22.1/include/asm-arm/arch-at91/at91_mci.h	(arbetskopia)
+@@ -26,6 +26,9 @@
+ #define AT91_MCI_MR		0x04		/* Mode Register */
+ #define		AT91_MCI_CLKDIV		(0xff  <<  0)	/* Clock Divider */
+ #define		AT91_MCI_PWSDIV		(7     <<  8)	/* Power Saving Divider */
++#define		AT91_MCI_RDPROOF	(1     << 11)	/* Read Proof Enable [SAM926[03] only] */
++#define		AT91_MCI_WRPROOF	(1     << 12)	/* Write Proof Enable [SAM926[03] only] */
++#define		AT91_MCI_PDCFBYTE	(1     << 13)	/* PDC Force Byte Transfer [SAM926[03] only] */
+ #define		AT91_MCI_PDCPADV	(1     << 14)	/* PDC Padding Value */
+ #define		AT91_MCI_PDCMODE	(1     << 15)	/* PDC-orientated Mode */
+ #define		AT91_MCI_BLKLEN		(0xfff << 18)	/* Data Block Length */
+Index: linux-2.6.22.1/include/asm-arm/arch-at91/at91_pmc.h
+===================================================================
+--- linux-2.6.22.1/include/asm-arm/arch-at91/at91_pmc.h	(revision 1)
++++ linux-2.6.22.1/include/asm-arm/arch-at91/at91_pmc.h	(arbetskopia)
+@@ -37,7 +37,9 @@
+ #define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
+ #define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
+ 
+-#define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register */
++#define AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [SAM9RL only] */
++
++#define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register [not on SAM9RL] */
+ #define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
+ #define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [AT91SAM926x only] */
+ #define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */
+Index: linux-2.6.22.1/include/asm-arm/arch-at91/board.h
+===================================================================
+--- linux-2.6.22.1/include/asm-arm/arch-at91/board.h	(revision 1)
++++ linux-2.6.22.1/include/asm-arm/arch-at91/board.h	(arbetskopia)
+@@ -64,6 +64,7 @@
+ 
+  /* Ethernet (EMAC & MACB) */
+ struct at91_eth_data {
++	u32		phy_mask;
+ 	u8		phy_irq_pin;	/* PHY IRQ */
+ 	u8		is_rmii;	/* using RMII interface? */
+ };
+@@ -124,9 +125,21 @@
+ };
+ extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
+ 
++ /* ISI */
++extern void __init at91_add_device_isi(void);
++
+  /* LEDs */
+ extern u8 at91_leds_cpu;
+ extern u8 at91_leds_timer;
+ extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
+ 
++struct at91_gpio_led {
++	u8		index;		/* index of LED */
++	char*		name;		/* name of LED */
++	u8		gpio;		/* AT91_PIN_xx */
++	u8		flags;		/* 1=active-high */
++	char*		trigger;	/* default trigger */
++};
++extern void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr);
++
+ #endif
+Index: linux-2.6.22.1/include/linux/spi/at73c213.h
+===================================================================
+--- linux-2.6.22.1/include/linux/spi/at73c213.h	(revision 0)
++++ linux-2.6.22.1/include/linux/spi/at73c213.h	(revision 0)
+@@ -0,0 +1,25 @@
++/*
++ * Board-specific data used to set up AT73c213 audio DAC driver.
++ */
++
++#ifndef __LINUX_SPI_AT73C213_H
++#define __LINUX_SPI_AT73C213_H
++
++/**
++ * at73c213_board_info - how the external DAC is wired to the device.
++ *
++ * @ssc_id: SSC platform_driver id the DAC shall use to stream the audio.
++ * @dac_clk: the external clock used to provide master clock to the DAC.
++ * @shortname: a short discription for the DAC, seen by userspace tools.
++ *
++ * This struct contains the configuration of the hardware connection to the
++ * external DAC. The DAC needs a master clock and a I2S audio stream. It also
++ * provides a name which is used to identify it in userspace tools.
++ */
++struct at73c213_board_info {
++	int		ssc_id;
++	struct clk	*dac_clk;
++	char		shortname[32];
++};
++
++#endif /* __LINUX_SPI_AT73C213_H */
+Index: linux-2.6.22.1/include/linux/leds.h
+===================================================================
+--- linux-2.6.22.1/include/linux/leds.h	(revision 1)
++++ linux-2.6.22.1/include/linux/leds.h	(arbetskopia)
+@@ -110,4 +110,18 @@
+ #define ledtrig_ide_activity() do {} while(0)
+ #endif
+ 
++/* For the leds-gpio driver */
++struct gpio_led {
++	const char *name;
++	char *default_trigger;
++	unsigned 	gpio;
++	u8 		active_low;
++};
++
++struct gpio_led_platform_data {
++	int 		num_leds;
++	struct gpio_led *leds;
++};
++
++
+ #endif		/* __LINUX_LEDS_H_INCLUDED */
+Index: linux-2.6.22.1/include/linux/clk.h
+===================================================================
+--- linux-2.6.22.1/include/linux/clk.h	(revision 1)
++++ linux-2.6.22.1/include/linux/clk.h	(arbetskopia)
+@@ -121,4 +121,24 @@
+  */
+ struct clk *clk_get_parent(struct clk *clk);
+ 
++/**
++ * clk_must_disable - report whether a clock's users must disable it
++ * @clk: one node in the clock tree
++ *
++ * This routine returns true only if the upcoming system state requires
++ * disabling the specified clock.
++ *
++ * It's common for platform power states to constrain certain clocks (and
++ * their descendants) to be unavailable, while other states allow that
++ * clock to be active.  A platform's power states often include an "all on"
++ * mode; system wide sleep states like "standby" or "suspend-to-RAM"; and
++ * operating states which sacrifice functionality for lower power usage.
++ *
++ * The constraint value is commonly tested in device driver suspend(), to
++ * leave clocks active if they are needed for features like wakeup events.
++ * On platforms that support reduced functionality operating states, the
++ * constraint may also need to be tested during resume() and probe() calls.
++ */
++int clk_must_disable(struct clk *clk);
++
+ #endif
+Index: linux-2.6.22.1/include/linux/usb/Kbuild
+===================================================================
+--- linux-2.6.22.1/include/linux/usb/Kbuild	(revision 1)
++++ linux-2.6.22.1/include/linux/usb/Kbuild	(arbetskopia)
+@@ -1,5 +1,6 @@
+ unifdef-y += audio.h
+ unifdef-y += cdc.h
+ unifdef-y += ch9.h
++unifdef-y += gadgetfs.h
+ unifdef-y += midi.h
+ 
+Index: linux-2.6.22.1/include/linux/usb/gadgetfs.h
+===================================================================
+--- linux-2.6.22.1/include/linux/usb/gadgetfs.h	(revision 0)
++++ linux-2.6.22.1/include/linux/usb/gadgetfs.h	(revision 0)
+@@ -0,0 +1,81 @@
++#ifndef __LINUX_USB_GADGETFS_H
++#define __LINUX_USB_GADGETFS_H
++
++#include <asm/types.h>
++#include <asm/ioctl.h>
++
++#include <linux/usb/ch9.h>
++
++/*
++ * Filesystem based user-mode API to USB Gadget controller hardware
++ *
++ * Other than ep0 operations, most things are done by read() and write()
++ * on endpoint files found in one directory.  They are configured by
++ * writing descriptors, and then may be used for normal stream style
++ * i/o requests.  When ep0 is configured, the device can enumerate;
++ * when it's closed, the device disconnects from usb.  Operations on
++ * ep0 require ioctl() operations.
++ *
++ * Configuration and device descriptors get written to /dev/gadget/$CHIP,
++ * which may then be used to read usb_gadgetfs_event structs.  The driver
++ * may activate endpoints as it handles SET_CONFIGURATION setup events,
++ * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
++ * then performing data transfers by reading or writing.
++ */
++
++/*
++ * Events are delivered on the ep0 file descriptor, when the user mode driver
++ * reads from this file descriptor after writing the descriptors.  Don't
++ * stop polling this descriptor.
++ */
++
++enum usb_gadgetfs_event_type {
++	GADGETFS_NOP = 0,
++
++	GADGETFS_CONNECT,
++	GADGETFS_DISCONNECT,
++	GADGETFS_SETUP,
++	GADGETFS_SUSPEND,
++	// and likely more !
++};
++
++/* NOTE:  this structure must stay the same size and layout on
++ * both 32-bit and 64-bit kernels.
++ */
++struct usb_gadgetfs_event {
++	union {
++		// NOP, DISCONNECT, SUSPEND: nothing
++		// ... some hardware can't report disconnection
++
++		// CONNECT: just the speed
++		enum usb_device_speed	speed;
++
++		// SETUP: packet; DATA phase i/o precedes next event
++		// (setup.bmRequestType & USB_DIR_IN) flags direction
++		// ... includes SET_CONFIGURATION, SET_INTERFACE
++		struct usb_ctrlrequest	setup;
++	} u;
++	enum usb_gadgetfs_event_type	type;
++};
++
++
++/* endpoint ioctls */
++
++/* IN transfers may be reported to the gadget driver as complete
++ *	when the fifo is loaded, before the host reads the data;
++ * OUT transfers may be reported to the host's "client" driver as
++ *	complete when they're sitting in the FIFO unread.
++ * THIS returns how many bytes are "unclaimed" in the endpoint fifo
++ * (needed for precise fault handling, when the hardware allows it)
++ */
++#define	GADGETFS_FIFO_STATUS	_IO('g',1)
++
++/* discards any unclaimed data in the fifo. */
++#define	GADGETFS_FIFO_FLUSH	_IO('g',2)
++
++/* resets endpoint halt+toggle; used to implement set_interface.
++ * some hardware (like pxa2xx) can't support this.
++ */
++#define	GADGETFS_CLEAR_HALT	_IO('g',3)
++
++#endif /* __LINUX_USB_GADGETFS_H */
+Index: linux-2.6.22.1/include/linux/usb_gadgetfs.h
+===================================================================
+--- linux-2.6.22.1/include/linux/usb_gadgetfs.h	(revision 1)
++++ linux-2.6.22.1/include/linux/usb_gadgetfs.h	(arbetskopia)
+@@ -1,75 +0,0 @@
+-
+-#include <asm/types.h>
+-#include <asm/ioctl.h>
+-
+-#include <linux/usb/ch9.h>
+-
+-/*
+- * Filesystem based user-mode API to USB Gadget controller hardware
+- *
+- * Almost everything can be done with only read and write operations,
+- * on endpoint files found in one directory.  They are configured by
+- * writing descriptors, and then may be used for normal stream style
+- * i/o requests.  When ep0 is configured, the device can enumerate;
+- * when it's closed, the device disconnects from usb.
+- *
+- * Configuration and device descriptors get written to /dev/gadget/$CHIP,
+- * which may then be used to read usb_gadgetfs_event structs.  The driver
+- * may activate endpoints as it handles SET_CONFIGURATION setup events,
+- * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
+- * then performing data transfers by reading or writing.
+- */
+-
+-/*
+- * Events are delivered on the ep0 file descriptor, if the user mode driver
+- * reads from this file descriptor after writing the descriptors.  Don't
+- * stop polling this descriptor, if you write that kind of driver.
+- */
+-
+-enum usb_gadgetfs_event_type {
+-	GADGETFS_NOP = 0,
+-
+-	GADGETFS_CONNECT,
+-	GADGETFS_DISCONNECT,
+-	GADGETFS_SETUP,
+-	GADGETFS_SUSPEND,
+-	// and likely more !
+-};
+-
+-struct usb_gadgetfs_event {
+-	enum usb_gadgetfs_event_type	type;
+-	union {
+-		// NOP, DISCONNECT, SUSPEND: nothing
+-		// ... some hardware can't report disconnection
+-
+-		// CONNECT: just the speed
+-		enum usb_device_speed	speed;
+-
+-		// SETUP: packet; DATA phase i/o precedes next event
+-		// (setup.bmRequestType & USB_DIR_IN) flags direction 
+-		// ... includes SET_CONFIGURATION, SET_INTERFACE
+-		struct usb_ctrlrequest	setup;
+-	} u;
+-};
+-
+-
+-/* endpoint ioctls */
+-
+-/* IN transfers may be reported to the gadget driver as complete
+- * 	when the fifo is loaded, before the host reads the data;
+- * OUT transfers may be reported to the host's "client" driver as
+- * 	complete when they're sitting in the FIFO unread.
+- * THIS returns how many bytes are "unclaimed" in the endpoint fifo
+- * (needed for precise fault handling, when the hardware allows it)
+- */
+-#define	GADGETFS_FIFO_STATUS	_IO('g',1)
+-
+-/* discards any unclaimed data in the fifo. */
+-#define	GADGETFS_FIFO_FLUSH	_IO('g',2)
+-
+-/* resets endpoint halt+toggle; used to implement set_interface.
+- * some hardware (like pxa2xx) can't support this.
+- */
+-#define	GADGETFS_CLEAR_HALT	_IO('g',3)
+-
+-
+Index: linux-2.6.22.1/include/linux/atmel-ssc.h
+===================================================================
+--- linux-2.6.22.1/include/linux/atmel-ssc.h	(revision 0)
++++ linux-2.6.22.1/include/linux/atmel-ssc.h	(revision 0)
+@@ -0,0 +1,312 @@
++#ifndef __INCLUDE_ATMEL_SSC_H
++#define __INCLUDE_ATMEL_SSC_H
++
++#include <linux/platform_device.h>
++#include <linux/list.h>
++
++struct ssc_device {
++	struct list_head	list;
++	void __iomem		*regs;
++	struct platform_device	*pdev;
++	struct clk		*clk;
++	int			user;
++	int			irq;
++};
++
++struct ssc_device * __must_check ssc_request(unsigned int ssc_num);
++void ssc_free(struct ssc_device *ssc);
++
++/* SSC register offsets */
++
++/* SSC Control Register */
++#define SSC_CR				0x00000000
++#define SSC_CR_RXDIS_SIZE			 1
++#define SSC_CR_RXDIS_OFFSET			 1
++#define SSC_CR_RXEN_SIZE			 1
++#define SSC_CR_RXEN_OFFSET			 0
++#define SSC_CR_SWRST_SIZE			 1
++#define SSC_CR_SWRST_OFFSET			15
++#define SSC_CR_TXDIS_SIZE			 1
++#define SSC_CR_TXDIS_OFFSET			 9
++#define SSC_CR_TXEN_SIZE			 1
++#define SSC_CR_TXEN_OFFSET			 8
++
++/* SSC Clock Mode Register */
++#define SSC_CMR				0x00000004
++#define SSC_CMR_DIV_SIZE			12
++#define SSC_CMR_DIV_OFFSET			 0
++
++/* SSC Receive Clock Mode Register */
++#define SSC_RCMR			0x00000010
++#define SSC_RCMR_CKG_SIZE			 2
++#define SSC_RCMR_CKG_OFFSET			 6
++#define SSC_RCMR_CKI_SIZE			 1
++#define SSC_RCMR_CKI_OFFSET			 5
++#define SSC_RCMR_CKO_SIZE			 3
++#define SSC_RCMR_CKO_OFFSET			 2
++#define SSC_RCMR_CKS_SIZE			 2
++#define SSC_RCMR_CKS_OFFSET			 0
++#define SSC_RCMR_PERIOD_SIZE			 8
++#define SSC_RCMR_PERIOD_OFFSET			24
++#define SSC_RCMR_START_SIZE			 4
++#define SSC_RCMR_START_OFFSET			 8
++#define SSC_RCMR_STOP_SIZE			 1
++#define SSC_RCMR_STOP_OFFSET			12
++#define SSC_RCMR_STTDLY_SIZE			 8
++#define SSC_RCMR_STTDLY_OFFSET			16
++
++/* SSC Receive Frame Mode Register */
++#define SSC_RFMR			0x00000014
++#define SSC_RFMR_DATLEN_SIZE			 5
++#define SSC_RFMR_DATLEN_OFFSET			 0
++#define SSC_RFMR_DATNB_SIZE			 4
++#define SSC_RFMR_DATNB_OFFSET			 8
++#define SSC_RFMR_FSEDGE_SIZE			 1
++#define SSC_RFMR_FSEDGE_OFFSET			24
++#define SSC_RFMR_FSLEN_SIZE			 4
++#define SSC_RFMR_FSLEN_OFFSET			16
++#define SSC_RFMR_FSOS_SIZE			 4
++#define SSC_RFMR_FSOS_OFFSET			20
++#define SSC_RFMR_LOOP_SIZE			 1
++#define SSC_RFMR_LOOP_OFFSET			 5
++#define SSC_RFMR_MSBF_SIZE			 1
++#define SSC_RFMR_MSBF_OFFSET			 7
++
++/* SSC Transmit Clock Mode Register */
++#define SSC_TCMR			0x00000018
++#define SSC_TCMR_CKG_SIZE			 2
++#define SSC_TCMR_CKG_OFFSET			 6
++#define SSC_TCMR_CKI_SIZE			 1
++#define SSC_TCMR_CKI_OFFSET			 5
++#define SSC_TCMR_CKO_SIZE			 3
++#define SSC_TCMR_CKO_OFFSET			 2
++#define SSC_TCMR_CKS_SIZE			 2
++#define SSC_TCMR_CKS_OFFSET			 0
++#define SSC_TCMR_PERIOD_SIZE			 8
++#define SSC_TCMR_PERIOD_OFFSET			24
++#define SSC_TCMR_START_SIZE			 4
++#define SSC_TCMR_START_OFFSET			 8
++#define SSC_TCMR_STTDLY_SIZE			 8
++#define SSC_TCMR_STTDLY_OFFSET			16
++
++/* SSC Transmit Frame Mode Register */
++#define SSC_TFMR			0x0000001c
++#define SSC_TFMR_DATDEF_SIZE			 1
++#define SSC_TFMR_DATDEF_OFFSET			 5
++#define SSC_TFMR_DATLEN_SIZE			 5
++#define SSC_TFMR_DATLEN_OFFSET			 0
++#define SSC_TFMR_DATNB_SIZE			 4
++#define SSC_TFMR_DATNB_OFFSET			 8
++#define SSC_TFMR_FSDEN_SIZE			 1
++#define SSC_TFMR_FSDEN_OFFSET			23
++#define SSC_TFMR_FSEDGE_SIZE			 1
++#define SSC_TFMR_FSEDGE_OFFSET			24
++#define SSC_TFMR_FSLEN_SIZE			 4
++#define SSC_TFMR_FSLEN_OFFSET			16
++#define SSC_TFMR_FSOS_SIZE			 3
++#define SSC_TFMR_FSOS_OFFSET			20
++#define SSC_TFMR_MSBF_SIZE			 1
++#define SSC_TFMR_MSBF_OFFSET			 7
++
++/* SSC Receive Hold Register */
++#define SSC_RHR				0x00000020
++#define SSC_RHR_RDAT_SIZE			32
++#define SSC_RHR_RDAT_OFFSET			 0
++
++/* SSC Transmit Hold Register */
++#define SSC_THR				0x00000024
++#define SSC_THR_TDAT_SIZE			32
++#define SSC_THR_TDAT_OFFSET			 0
++
++/* SSC Receive Sync. Holding Register */
++#define SSC_RSHR			0x00000030
++#define SSC_RSHR_RSDAT_SIZE			16
++#define SSC_RSHR_RSDAT_OFFSET			 0
++
++/* SSC Transmit Sync. Holding Register */
++#define SSC_TSHR			0x00000034
++#define SSC_TSHR_TSDAT_SIZE			16
++#define SSC_TSHR_RSDAT_OFFSET			 0
++
++/* SSC Receive Compare 0 Register */
++#define SSC_RC0R			0x00000038
++#define SSC_RC0R_CP0_SIZE			16
++#define SSC_RC0R_CP0_OFFSET			 0
++
++/* SSC Receive Compare 1 Register */
++#define SSC_RC1R			0x0000003c
++#define SSC_RC1R_CP1_SIZE			16
++#define SSC_RC1R_CP1_OFFSET			 0
++
++/* SSC Status Register */
++#define SSC_SR				0x00000040
++#define SSC_SR_CP0_SIZE				 1
++#define SSC_SR_CP0_OFFSET			 8
++#define SSC_SR_CP1_SIZE				 1
++#define SSC_SR_CP1_OFFSET			 9
++#define SSC_SR_ENDRX_SIZE			 1
++#define SSC_SR_ENDRX_OFFSET			 6
++#define SSC_SR_ENDTX_SIZE			 1
++#define SSC_SR_ENDTX_OFFSET			 2
++#define SSC_SR_OVRUN_SIZE			 1
++#define SSC_SR_OVRUN_OFFSET			 5
++#define SSC_SR_RXBUFF_SIZE			 1
++#define SSC_SR_RXBUFF_OFFSET			 7
++#define SSC_SR_RXEN_SIZE			 1
++#define SSC_SR_RXEN_OFFSET			17
++#define SSC_SR_RXRDY_SIZE			 1
++#define SSC_SR_RXRDY_OFFSET			 4
++#define SSC_SR_RXSYN_SIZE			 1
++#define SSC_SR_RXSYN_OFFSET			11
++#define SSC_SR_TXBUFE_SIZE			 1
++#define SSC_SR_TXBUFE_OFFSET			 3
++#define SSC_SR_TXEMPTY_SIZE			 1
++#define SSC_SR_TXEMPTY_OFFSET			 1
++#define SSC_SR_TXEN_SIZE			 1
++#define SSC_SR_TXEN_OFFSET			16
++#define SSC_SR_TXRDY_SIZE			 1
++#define SSC_SR_TXRDY_OFFSET			 0
++#define SSC_SR_TXSYN_SIZE			 1
++#define SSC_SR_TXSYN_OFFSET			10
++
++/* SSC Interrupt Enable Register */
++#define SSC_IER				0x00000044
++#define SSC_IER_CP0_SIZE			 1
++#define SSC_IER_CP0_OFFSET			 8
++#define SSC_IER_CP1_SIZE			 1
++#define SSC_IER_CP1_OFFSET			 9
++#define SSC_IER_ENDRX_SIZE			 1
++#define SSC_IER_ENDRX_OFFSET			 6
++#define SSC_IER_ENDTX_SIZE			 1
++#define SSC_IER_ENDTX_OFFSET			 2
++#define SSC_IER_OVRUN_SIZE			 1
++#define SSC_IER_OVRUN_OFFSET			 5
++#define SSC_IER_RXBUFF_SIZE			 1
++#define SSC_IER_RXBUFF_OFFSET			 7
++#define SSC_IER_RXRDY_SIZE			 1
++#define SSC_IER_RXRDY_OFFSET			 4
++#define SSC_IER_RXSYN_SIZE			 1
++#define SSC_IER_RXSYN_OFFSET			11
++#define SSC_IER_TXBUFE_SIZE			 1
++#define SSC_IER_TXBUFE_OFFSET			 3
++#define SSC_IER_TXEMPTY_SIZE			 1
++#define SSC_IER_TXEMPTY_OFFSET			 1
++#define SSC_IER_TXRDY_SIZE			 1
++#define SSC_IER_TXRDY_OFFSET			 0
++#define SSC_IER_TXSYN_SIZE			 1
++#define SSC_IER_TXSYN_OFFSET			10
++
++/* SSC Interrupt Disable Register */
++#define SSC_IDR				0x00000048
++#define SSC_IDR_CP0_SIZE			 1
++#define SSC_IDR_CP0_OFFSET			 8
++#define SSC_IDR_CP1_SIZE			 1
++#define SSC_IDR_CP1_OFFSET			 9
++#define SSC_IDR_ENDRX_SIZE			 1
++#define SSC_IDR_ENDRX_OFFSET			 6
++#define SSC_IDR_ENDTX_SIZE			 1
++#define SSC_IDR_ENDTX_OFFSET			 2
++#define SSC_IDR_OVRUN_SIZE			 1
++#define SSC_IDR_OVRUN_OFFSET			 5
++#define SSC_IDR_RXBUFF_SIZE			 1
++#define SSC_IDR_RXBUFF_OFFSET			 7
++#define SSC_IDR_RXRDY_SIZE			 1
++#define SSC_IDR_RXRDY_OFFSET			 4
++#define SSC_IDR_RXSYN_SIZE			 1
++#define SSC_IDR_RXSYN_OFFSET			11
++#define SSC_IDR_TXBUFE_SIZE			 1
++#define SSC_IDR_TXBUFE_OFFSET			 3
++#define SSC_IDR_TXEMPTY_SIZE			 1
++#define SSC_IDR_TXEMPTY_OFFSET			 1
++#define SSC_IDR_TXRDY_SIZE			 1
++#define SSC_IDR_TXRDY_OFFSET			 0
++#define SSC_IDR_TXSYN_SIZE			 1
++#define SSC_IDR_TXSYN_OFFSET			10
++
++/* SSC Interrupt Mask Register */
++#define SSC_IMR				0x0000004c
++#define SSC_IMR_CP0_SIZE			 1
++#define SSC_IMR_CP0_OFFSET			 8
++#define SSC_IMR_CP1_SIZE			 1
++#define SSC_IMR_CP1_OFFSET			 9
++#define SSC_IMR_ENDRX_SIZE			 1
++#define SSC_IMR_ENDRX_OFFSET			 6
++#define SSC_IMR_ENDTX_SIZE			 1
++#define SSC_IMR_ENDTX_OFFSET			 2
++#define SSC_IMR_OVRUN_SIZE			 1
++#define SSC_IMR_OVRUN_OFFSET			 5
++#define SSC_IMR_RXBUFF_SIZE			 1
++#define SSC_IMR_RXBUFF_OFFSET			 7
++#define SSC_IMR_RXRDY_SIZE			 1
++#define SSC_IMR_RXRDY_OFFSET			 4
++#define SSC_IMR_RXSYN_SIZE			 1
++#define SSC_IMR_RXSYN_OFFSET			11
++#define SSC_IMR_TXBUFE_SIZE			 1
++#define SSC_IMR_TXBUFE_OFFSET			 3
++#define SSC_IMR_TXEMPTY_SIZE			 1
++#define SSC_IMR_TXEMPTY_OFFSET			 1
++#define SSC_IMR_TXRDY_SIZE			 1
++#define SSC_IMR_TXRDY_OFFSET			 0
++#define SSC_IMR_TXSYN_SIZE			 1
++#define SSC_IMR_TXSYN_OFFSET			10
++
++/* SSC PDC Receive Pointer Register */
++#define SSC_PDC_RPR			0x00000100
++
++/* SSC PDC Receive Counter Register */
++#define SSC_PDC_RCR			0x00000104
++
++/* SSC PDC Transmit Pointer Register */
++#define SSC_PDC_TPR			0x00000108
++
++/* SSC PDC Receive Next Pointer Register */
++#define SSC_PDC_RNPR			0x00000110
++
++/* SSC PDC Receive Next Counter Register */
++#define SSC_PDC_RNCR			0x00000114
++
++/* SSC PDC Transmit Counter Register */
++#define SSC_PDC_TCR			0x0000010c
++
++/* SSC PDC Transmit Next Pointer Register */
++#define SSC_PDC_TNPR			0x00000118
++
++/* SSC PDC Transmit Next Counter Register */
++#define SSC_PDC_TNCR			0x0000011c
++
++/* SSC PDC Transfer Control Register */
++#define SSC_PDC_PTCR			0x00000120
++#define SSC_PDC_PTCR_RXTDIS_SIZE		 1
++#define SSC_PDC_PTCR_RXTDIS_OFFSET		 1
++#define SSC_PDC_PTCR_RXTEN_SIZE			 1
++#define SSC_PDC_PTCR_RXTEN_OFFSET		 0
++#define SSC_PDC_PTCR_TXTDIS_SIZE		 1
++#define SSC_PDC_PTCR_TXTDIS_OFFSET		 9
++#define SSC_PDC_PTCR_TXTEN_SIZE			 1
++#define SSC_PDC_PTCR_TXTEN_OFFSET		 8
++
++/* SSC PDC Transfer Status Register */
++#define SSC_PDC_PTSR			0x00000124
++#define SSC_PDC_PTSR_RXTEN_SIZE			 1
++#define SSC_PDC_PTSR_RXTEN_OFFSET		 0
++#define SSC_PDC_PTSR_TXTEN_SIZE			 1
++#define SSC_PDC_PTSR_TXTEN_OFFSET		 8
++
++/* Bit manipulation macros */
++#define SSC_BIT(name)					\
++	(1 << SSC_##name##_OFFSET)
++#define SSC_BF(name, value)				\
++	(((value) & ((1 << SSC_##name##_SIZE) - 1))	\
++	 << SSC_##name##_OFFSET)
++#define SSC_BFEXT(name, value)				\
++	(((value) >> SSC_##name##_OFFSET)		\
++	 & ((1 << SSC_##name##_SIZE) - 1))
++#define SSC_BFINS(name, value, old)			\
++	(((old) & ~(((1 << SSC_##name##_SIZE) - 1)	\
++	<< SSC_##name##_OFFSET)) | SSC_BF(name, value))
++
++/* Register access macros */
++#define ssc_readl(base, reg)		__raw_readl(base + SSC_##reg)
++#define ssc_writel(base, reg, value)	__raw_writel((value), base + SSC_##reg)
++
++#endif /* __INCLUDE_ATMEL_SSC_H */
+Index: linux-2.6.22.1/include/linux/gpio_mouse.h
+===================================================================
+--- linux-2.6.22.1/include/linux/gpio_mouse.h	(revision 0)
++++ linux-2.6.22.1/include/linux/gpio_mouse.h	(revision 0)
+@@ -0,0 +1,61 @@
++/*
++ * Driver for simulating a mouse on GPIO lines.
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef _GPIO_MOUSE_H
++#define _GPIO_MOUSE_H
++
++#define GPIO_MOUSE_POLARITY_ACT_HIGH	0x00
++#define GPIO_MOUSE_POLARITY_ACT_LOW	0x01
++
++#define GPIO_MOUSE_PIN_UP	0
++#define GPIO_MOUSE_PIN_DOWN	1
++#define GPIO_MOUSE_PIN_LEFT	2
++#define GPIO_MOUSE_PIN_RIGHT	3
++#define GPIO_MOUSE_PIN_BLEFT	4
++#define GPIO_MOUSE_PIN_BMIDDLE	5
++#define GPIO_MOUSE_PIN_BRIGHT	6
++#define GPIO_MOUSE_PIN_MAX	7
++
++/**
++ * struct gpio_mouse_platform_data
++ * @scan_ms: integer in ms specifying the scan periode.
++ * @polarity: Pin polarity, active high or low.
++ * @up: GPIO line for up value.
++ * @down: GPIO line for down value.
++ * @left: GPIO line for left value.
++ * @right: GPIO line for right value.
++ * @bleft: GPIO line for left button.
++ * @bmiddle: GPIO line for middle button.
++ * @bright: GPIO line for right button.
++ *
++ * This struct must be added to the platform_device in the board code.
++ * It is used by the gpio_mouse driver to setup GPIO lines and to
++ * calculate mouse movement.
++ */
++struct gpio_mouse_platform_data {
++	int scan_ms;
++	int polarity;
++
++	union {
++		struct {
++			int up;
++			int down;
++			int left;
++			int right;
++
++			int bleft;
++			int bmiddle;
++			int bright;
++		};
++		int pins[GPIO_MOUSE_PIN_MAX];
++	};
++};
++
++#endif /* _GPIO_MOUSE_H */
+Index: linux-2.6.22.1/include/linux/i2c-id.h
+===================================================================
+--- linux-2.6.22.1/include/linux/i2c-id.h	(revision 1)
++++ linux-2.6.22.1/include/linux/i2c-id.h	(arbetskopia)
+@@ -203,6 +203,7 @@
+ 
+ /* --- PCA 9564 based algorithms */
+ #define I2C_HW_A_ISA		0x1a0000 /* generic ISA Bus interface card */
++#define I2C_HW_A_PLAT		0x1a0001 /* generic platform_bus interface */
+ 
+ /* --- ACPI Embedded controller algorithms                              */
+ #define I2C_HW_ACPI_EC          0x1f0000
+Index: linux-2.6.22.1/include/asm-avr32/unaligned.h
+===================================================================
+--- linux-2.6.22.1/include/asm-avr32/unaligned.h	(revision 1)
++++ linux-2.6.22.1/include/asm-avr32/unaligned.h	(arbetskopia)
+@@ -7,19 +7,10 @@
+  * words, but halfwords must be halfword-aligned, and doublewords must
+  * be word-aligned.
+  *
+- * TODO: Make all this CPU-specific and optimize.
++ * However, swapped word loads must be word-aligned so we can't
++ * optimize word loads in general.
+  */
+ 
+-#include <linux/string.h>
++#include <asm-generic/unaligned.h>
+ 
+-/* Use memmove here, so gcc does not insert a __builtin_memcpy. */
+-
+-#define get_unaligned(ptr) \
+-  ({ __typeof__(*(ptr)) __tmp; memmove(&__tmp, (ptr), sizeof(*(ptr))); __tmp; })
+-
+-#define put_unaligned(val, ptr)				\
+-  ({ __typeof__(*(ptr)) __tmp = (val);			\
+-     memmove((ptr), &__tmp, sizeof(*(ptr)));		\
+-     (void)0; })
+-
+ #endif /* __ASM_AVR32_UNALIGNED_H */
+Index: linux-2.6.22.1/include/asm-avr32/atomic.h
+===================================================================
+--- linux-2.6.22.1/include/asm-avr32/atomic.h	(revision 1)
++++ linux-2.6.22.1/include/asm-avr32/atomic.h	(arbetskopia)
+@@ -101,7 +101,7 @@
+ 		"	mov	%1, 1\n"
+ 		"1:"
+ 		: "=&r"(tmp), "=&r"(result), "=o"(v->counter)
+-		: "m"(v->counter), "rKs21"(a), "rKs21"(u)
++		: "m"(v->counter), "rKs21"(a), "rKs21"(u), "1"(result)
+ 		: "cc", "memory");
+ 
+ 	return result;
+@@ -137,7 +137,7 @@
+ 			"	mov	%1, 1\n"
+ 			"1:"
+ 			: "=&r"(tmp), "=&r"(result), "=o"(v->counter)
+-			: "m"(v->counter), "r"(a), "ir"(u)
++			: "m"(v->counter), "r"(a), "ir"(u), "1"(result)
+ 			: "cc", "memory");
+ 	}
+ 
+Index: linux-2.6.22.1/include/asm-avr32/dma-controller.h
+===================================================================
+--- linux-2.6.22.1/include/asm-avr32/dma-controller.h	(revision 0)
++++ linux-2.6.22.1/include/asm-avr32/dma-controller.h	(revision 0)
+@@ -0,0 +1,166 @@
++/*
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __ASM_AVR32_DMA_CONTROLLER_H
++#define __ASM_AVR32_DMA_CONTROLLER_H
++
++#include <linux/device.h>
++
++#define DMA_DIR_MEM_TO_MEM		0x0000
++#define DMA_DIR_MEM_TO_PERIPH		0x0001
++#define DMA_DIR_PERIPH_TO_MEM		0x0002
++#define DMA_DIR_PERIPH_TO_PERIPH	0x0003
++
++#define DMA_WIDTH_8BIT			0
++#define DMA_WIDTH_16BIT			1
++#define DMA_WIDTH_32BIT			2
++
++struct dma_request {
++	struct dma_controller *dmac;
++	struct list_head list;
++
++	unsigned short channel;
++
++	void (*xfer_complete)(struct dma_request *req);
++	void (*block_complete)(struct dma_request *req);
++	void (*error)(struct dma_request *req);
++};
++
++struct dma_request_sg {
++	struct dma_request req;
++
++	int nr_sg;
++	struct scatterlist *sg;
++	unsigned long block_size;
++	unsigned int nr_blocks;
++
++	dma_addr_t data_reg;
++	unsigned short periph_id;
++
++	unsigned char direction;
++	unsigned char width;
++};
++#define to_dma_request_sg(_req)				\
++	container_of(_req, struct dma_request_sg, req)
++
++struct dma_request_cyclic {
++	struct dma_request req;
++
++        int periods;
++	unsigned long buffer_size;
++
++        dma_addr_t buffer_start;
++	dma_addr_t data_reg;
++
++	unsigned short periph_id;
++	unsigned char direction;
++	unsigned char width;
++
++        void *dev_id;
++};
++#define to_dma_request_cyclic(_req)				\
++	container_of(_req, struct dma_request_cyclic, req)
++
++struct dma_request_memcpy {
++	struct dma_request req;
++
++	dma_addr_t src_addr;
++	unsigned int src_width;
++	unsigned int src_stride;
++
++	dma_addr_t dst_addr;
++	unsigned int dst_width;
++	unsigned int dst_stride;
++
++	size_t length;
++
++	unsigned short src_reverse:1;
++	unsigned short dst_reverse:1;
++};
++#define to_dma_request_memcpy(_req)				\
++	container_of(_req, struct dma_request_memcpy, req)
++
++struct dma_controller {
++	struct list_head list;
++	int id;
++	struct device *dev;
++
++	int (*alloc_channel)(struct dma_controller *dmac);
++	void (*release_channel)(struct dma_controller *dmac,
++				int channel);
++	int (*prepare_request_sg)(struct dma_controller *dmac,
++				  struct dma_request_sg *req);
++        int (*prepare_request_cyclic)(struct dma_controller *dmac,
++				      struct dma_request_cyclic *req);
++	int (*prepare_request_memcpy)(struct dma_controller *dmac,
++				      struct dma_request_memcpy *req);
++	int (*start_request)(struct dma_controller *dmac,
++			     unsigned int channel);
++	int (*stop_request)(struct dma_controller *dmac,
++                            unsigned int channel);
++        dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
++                                      unsigned int channel);
++};
++
++static inline int
++dma_alloc_channel(struct dma_controller *dmac)
++{
++	return dmac->alloc_channel(dmac);
++}
++
++static inline void
++dma_release_channel(struct dma_controller *dmac, int chan)
++{
++	dmac->release_channel(dmac, chan);
++}
++
++static inline int
++dma_prepare_request_sg(struct dma_controller *dmac,
++		       struct dma_request_sg *req)
++{
++	return dmac->prepare_request_sg(dmac, req);
++}
++
++static inline int
++dma_prepare_request_cyclic(struct dma_controller *dmac,
++			   struct dma_request_cyclic *req)
++{
++	return dmac->prepare_request_cyclic(dmac, req);
++}
++
++static inline int
++dma_prepare_request_memcpy(struct dma_controller *dmac,
++			   struct dma_request_memcpy *req)
++{
++	return dmac->prepare_request_memcpy(dmac, req);
++}
++
++static inline int
++dma_start_request(struct dma_controller *dmac,
++		  unsigned int channel)
++{
++	return dmac->start_request(dmac, channel);
++}
++
++static inline int
++dma_stop_request(struct dma_controller *dmac,
++                 unsigned int channel)
++{
++	return dmac->stop_request(dmac, channel);
++}
++
++static inline dma_addr_t
++dma_get_current_pos(struct dma_controller *dmac,
++                    unsigned int channel)
++{
++	return dmac->get_current_pos(dmac, channel);
++}
++
++extern int register_dma_controller(struct dma_controller *dmac);
++extern struct dma_controller *find_dma_controller(int id);
++
++#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
+Index: linux-2.6.22.1/include/asm-avr32/arch-at32ap/portmux.h
+===================================================================
+--- linux-2.6.22.1/include/asm-avr32/arch-at32ap/portmux.h	(revision 1)
++++ linux-2.6.22.1/include/asm-avr32/arch-at32ap/portmux.h	(arbetskopia)
+@@ -25,4 +25,16 @@
+ void at32_select_gpio(unsigned int pin, unsigned long flags);
+ void at32_reserve_pin(unsigned int pin);
+ 
++#ifdef CONFIG_GPIO_DEV
++
++/* Gang allocators and accessors; used by the GPIO /dev driver */
++int at32_gpio_port_is_valid(unsigned int port);
++int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask);
++void at32_deselect_pins(unsigned int port, u32 pins);
++
++u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins);
++void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask);
++
++#endif /* CONFIG_GPIO_DEV */
++
+ #endif /* __ASM_ARCH_PORTMUX_H__ */
+Index: linux-2.6.22.1/include/asm-avr32/arch-at32ap/board.h
+===================================================================
+--- linux-2.6.22.1/include/asm-avr32/arch-at32ap/board.h	(revision 1)
++++ linux-2.6.22.1/include/asm-avr32/arch-at32ap/board.h	(arbetskopia)
+@@ -6,6 +6,8 @@
+ 
+ #include <linux/types.h>
+ 
++#define GPIO_PIN_NONE	(-1)
++
+ /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
+ void at32_add_system_devices(void);
+ 
+@@ -21,6 +23,7 @@
+ struct platform_device *at32_add_device_usart(unsigned int id);
+ 
+ struct eth_platform_data {
++	u32	phy_mask;
+ 	u8	is_rmii;
+ };
+ struct platform_device *
+@@ -30,9 +33,41 @@
+ struct platform_device *
+ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
+ 
++struct platform_device *at32_add_device_twi(unsigned int id);
++
++struct mci_platform_data {
++	int detect_pin;
++	int wp_pin;
++};
++struct platform_device *
++at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
++
++struct usba_platform_data {
++	int vbus_pin;
++};
++struct platform_device *
++at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
++
+ struct atmel_lcdfb_info;
+ struct platform_device *
+ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+ 		     unsigned long fbmem_start, unsigned long fbmem_len);
+ 
++struct platform_device *at32_add_device_ac97c(unsigned int id);
++struct platform_device *at32_add_device_abdac(unsigned int id);
++
++/* depending on what's hooked up, not all SSC pins will be used */
++#define	ATMEL_SSC_TK		0x01
++#define	ATMEL_SSC_TF		0x02
++#define	ATMEL_SSC_TD		0x04
++#define	ATMEL_SSC_TX		(ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
++
++#define	ATMEL_SSC_RK		0x10
++#define	ATMEL_SSC_RF		0x20
++#define	ATMEL_SSC_RD		0x40
++#define	ATMEL_SSC_RX		(ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
++
++struct platform_device *
++at32_add_device_ssc(unsigned int id, unsigned int flags);
++
+ #endif /* __ASM_ARCH_BOARD_H */
+Index: linux-2.6.22.1/scripts/checkstack.pl
+===================================================================
+--- linux-2.6.22.1/scripts/checkstack.pl	(revision 1)
++++ linux-2.6.22.1/scripts/checkstack.pl	(arbetskopia)
+@@ -12,6 +12,7 @@
+ #	sh64 port by Paul Mundt
+ #	Random bits by Matt Mackall <mpm@selenic.com>
+ #	M68k port by Geert Uytterhoeven and Andreas Schwab
++#	AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com>
+ #
+ #	Usage:
+ #	objdump -d vmlinux | stackcheck.pl [arch]
+@@ -37,6 +38,10 @@
+ 	if ($arch eq 'arm') {
+ 		#c0008ffc:	e24dd064	sub	sp, sp, #100	; 0x64
+ 		$re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o;
++	} elsif ($arch eq 'avr32') {
++		#8000008a:       20 1d           sub sp,4
++		#80000ca8:       fa cd 05 b0     sub sp,sp,1456
++		$re = qr/^.*sub.*sp.*,([0-9]{1,8})/o;
+ 	} elsif ($arch =~ /^i[3456]86$/) {
+ 		#c0105234:       81 ec ac 05 00 00       sub    $0x5ac,%esp
+ 		$re = qr/^.*[as][du][db]    \$(0x$x{1,8}),\%esp$/o;
+Index: linux-2.6.22.1/sound/Kconfig
+===================================================================
+--- linux-2.6.22.1/sound/Kconfig	(revision 1)
++++ linux-2.6.22.1/sound/Kconfig	(arbetskopia)
+@@ -63,9 +63,13 @@
+ 
+ source "sound/arm/Kconfig"
+ 
++if SPI
++source "sound/spi/Kconfig"
++endif
++
+ source "sound/mips/Kconfig"
+ 
+-# the following will depend on the order of config.
++# tee following will depend on the order of config.
+ # here assuming USB is defined before ALSA
+ source "sound/usb/Kconfig"
+ 
+Index: linux-2.6.22.1/sound/soc/at91/eti_b1_wm8731.c
+===================================================================
+--- linux-2.6.22.1/sound/soc/at91/eti_b1_wm8731.c	(revision 1)
++++ linux-2.6.22.1/sound/soc/at91/eti_b1_wm8731.c	(arbetskopia)
+@@ -34,8 +34,7 @@
+ #include <sound/soc.h>
+ #include <sound/soc-dapm.h>
+ 
+-#include <asm/arch/hardware.h>
+-#include <asm/arch/at91_pio.h>
++#include <asm/hardware.h>
+ #include <asm/arch/gpio.h>
+ 
+ #include "../codecs/wm8731.h"
+@@ -48,13 +47,6 @@
+ #define	DBG(x...)
+ #endif
+ 
+-#define AT91_PIO_TF1	(1 << (AT91_PIN_PB6 - PIN_BASE) % 32)
+-#define AT91_PIO_TK1	(1 << (AT91_PIN_PB7 - PIN_BASE) % 32)
+-#define AT91_PIO_TD1	(1 << (AT91_PIN_PB8 - PIN_BASE) % 32)
+-#define AT91_PIO_RD1	(1 << (AT91_PIN_PB9 - PIN_BASE) % 32)
+-#define AT91_PIO_RK1	(1 << (AT91_PIN_PB10 - PIN_BASE) % 32)
+-#define AT91_PIO_RF1	(1 << (AT91_PIN_PB11 - PIN_BASE) % 32)
+-
+ static struct clk *pck1_clk;
+ static struct clk *pllb_clk;
+ 
+@@ -277,7 +269,6 @@
+ static int __init eti_b1_init(void)
+ {
+ 	int ret;
+-	u32 ssc_pio_lines;
+ 	struct at91_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data;
+ 
+ 	if (!request_mem_region(AT91RM9200_BASE_SSC1, SZ_16K, "soc-audio")) {
+@@ -311,20 +302,13 @@
+ 		goto fail_io_unmap;
+ 	}
+ 
+- 	ssc_pio_lines = AT91_PIO_TF1 | AT91_PIO_TK1 | AT91_PIO_TD1
+-			| AT91_PIO_RD1 /* | AT91_PIO_RK1 */ | AT91_PIO_RF1;
++ 	at91_set_A_periph(AT91_PIN_PB6, 0);	/* TF1 */
++ 	at91_set_A_periph(AT91_PIN_PB7, 0);	/* TK1 */
++ 	at91_set_A_periph(AT91_PIN_PB8, 0);	/* TD1 */
++ 	at91_set_A_periph(AT91_PIN_PB9, 0);	/* RD1 */
++/* 	at91_set_A_periph(AT91_PIN_PB10, 0);*/	/* RK1 */ 	
++ 	at91_set_A_periph(AT91_PIN_PB11, 0);	/* RF1 */
+ 
+-	/* Reset all PIO registers and assign lines to peripheral A */
+- 	at91_sys_write(AT91_PIOB + PIO_PDR,  ssc_pio_lines);
+- 	at91_sys_write(AT91_PIOB + PIO_ODR,  ssc_pio_lines);
+- 	at91_sys_write(AT91_PIOB + PIO_IFDR, ssc_pio_lines);
+- 	at91_sys_write(AT91_PIOB + PIO_CODR, ssc_pio_lines);
+- 	at91_sys_write(AT91_PIOB + PIO_IDR,  ssc_pio_lines);
+- 	at91_sys_write(AT91_PIOB + PIO_MDDR, ssc_pio_lines);
+- 	at91_sys_write(AT91_PIOB + PIO_PUDR, ssc_pio_lines);
+- 	at91_sys_write(AT91_PIOB + PIO_ASR,  ssc_pio_lines);
+- 	at91_sys_write(AT91_PIOB + PIO_OWDR, ssc_pio_lines);
+-
+ 	/*
+ 	 * Set PCK1 parent to PLLB and its rate to 12 Mhz.
+ 	 */
+Index: linux-2.6.22.1/sound/spi/Kconfig
+===================================================================
+--- linux-2.6.22.1/sound/spi/Kconfig	(revision 0)
++++ linux-2.6.22.1/sound/spi/Kconfig	(revision 0)
+@@ -0,0 +1,31 @@
++#SPI drivers
++
++menu "SPI devices"
++	depends on SND != n
++
++config SND_AT73C213
++	tristate "Atmel AT73C213 DAC driver"
++	depends on ATMEL_SSC
++	select SND_PCM
++	help
++	  Say Y here if you want to use the Atmel AT73C213 external DAC. This
++	  DAC can be found on Atmel development boards.
++
++	  This driver requires the Atmel SSC driver for sound sink, a
++	  peripheral found on most AT91 and AVR32 microprocessors.
++
++	  To compile this driver as a module, choose M here: the module will be
++	  called snd-at73c213.
++
++config SND_AT73C213_TARGET_BITRATE
++	int "Target bitrate for AT73C213"
++	depends on SND_AT73C213
++	default "48000"
++	range 8000 50000
++	help
++	  Sets the target bitrate for the bitrate calculator in the driver.
++	  Limited by hardware to be between 8000 Hz and 50000 Hz.
++
++	  Set to 48000 Hz by default.
++
++endmenu
+Index: linux-2.6.22.1/sound/spi/at73c213.c
+===================================================================
+--- linux-2.6.22.1/sound/spi/at73c213.c	(revision 0)
++++ linux-2.6.22.1/sound/spi/at73c213.c	(revision 0)
+@@ -0,0 +1,1121 @@
++/*
++ * Driver for AT73C213 16-bit stereo DAC connected to Atmel SSC
++ *
++ * Copyright (C) 2006-2007 Atmel Norway
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ */
++
++/*#define DEBUG*/
++
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/delay.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++
++#include <sound/driver.h>
++#include <sound/initval.h>
++#include <sound/control.h>
++#include <sound/core.h>
++#include <sound/pcm.h>
++
++#include <linux/atmel-ssc.h>
++
++#include <linux/spi/spi.h>
++#include <linux/spi/at73c213.h>
++
++#include "at73c213.h"
++
++#define BITRATE_MIN	 8000 /* Hardware limit? */
++#define BITRATE_TARGET	CONFIG_SND_AT73C213_TARGET_BITRATE
++#define BITRATE_MAX	50000 /* Hardware limit. */
++
++/* Initial (hardware reset) AT73C213 register values. */
++static u8 snd_at73c213_original_image[18] =
++{
++	0x00,	/* 00 - CTRL    */
++	0x05,	/* 01 - LLIG    */
++	0x05,	/* 02 - RLIG    */
++	0x08,	/* 03 - LPMG    */
++	0x08,	/* 04 - RPMG    */
++	0x00,	/* 05 - LLOG    */
++	0x00,	/* 06 - RLOG    */
++	0x22,	/* 07 - OLC     */
++	0x09,	/* 08 - MC      */
++	0x00,	/* 09 - CSFC    */
++	0x00,	/* 0A - MISC    */
++	0x00,	/* 0B -         */
++	0x00,	/* 0C - PRECH   */
++	0x05,	/* 0D - AUXG    */
++	0x00,	/* 0E -         */
++	0x00,	/* 0F -         */
++	0x00,	/* 10 - RST     */
++	0x00,	/* 11 - PA_CTRL */
++};
++
++struct snd_at73c213 {
++	struct snd_card			*card;
++	struct snd_pcm			*pcm;
++	struct snd_pcm_substream	*substream;
++	struct at73c213_board_info	*board;
++	int				irq;
++	int				period;
++	unsigned long			bitrate;
++	struct clk			*bitclk;
++	struct ssc_device		*ssc;
++	struct spi_device		*spi;
++	u8				spi_wbuffer[2];
++	u8				spi_rbuffer[2];
++	/* Image of the SPI registers in AT73C213. */
++	u8				reg_image[18];
++	/* Protect registers against concurrent access. */
++	spinlock_t			lock;
++};
++
++#define get_chip(card) ((struct snd_at73c213 *)card->private_data)
++
++static int
++snd_at73c213_write_reg(struct snd_at73c213 *chip, u8 reg, u8 val)
++{
++	struct spi_message msg;
++	struct spi_transfer msg_xfer = {
++		.len		= 2,
++		.cs_change	= 0,
++	};
++	int retval;
++
++	spi_message_init(&msg);
++
++	chip->spi_wbuffer[0] = reg;
++	chip->spi_wbuffer[1] = val;
++
++	msg_xfer.tx_buf = chip->spi_wbuffer;
++	msg_xfer.rx_buf = chip->spi_rbuffer;
++	spi_message_add_tail(&msg_xfer, &msg);
++
++	retval = spi_sync(chip->spi, &msg);
++
++	if (!retval)
++		chip->reg_image[reg] = val;
++
++	return retval;
++}
++
++static struct snd_pcm_hardware snd_at73c213_playback_hw = {
++	.info		= SNDRV_PCM_INFO_INTERLEAVED |
++			  SNDRV_PCM_INFO_BLOCK_TRANSFER,
++	.formats	= SNDRV_PCM_FMTBIT_S16_BE,
++	.rates		= SNDRV_PCM_RATE_CONTINUOUS,
++	.rate_min	= 8000,  /* Replaced by chip->bitrate later. */
++	.rate_max	= 50000, /* Replaced by chip->bitrate later. */
++	.channels_min	= 2,
++	.channels_max	= 2,
++	.buffer_bytes_max = 64 * 1024 - 1,
++	.period_bytes_min = 512,
++	.period_bytes_max = 64 * 1024 - 1,
++	.periods_min	= 4,
++	.periods_max	= 1024,
++};
++
++/*
++ * Calculate and set bitrate and divisions.
++ */
++static int snd_at73c213_set_bitrate(struct snd_at73c213 *chip)
++{
++	unsigned long ssc_rate = clk_get_rate(chip->ssc->clk);
++	unsigned long dac_rate_new, ssc_div, status;
++	unsigned long ssc_div_max, ssc_div_min;
++	int max_tries;
++
++	/*
++	 * We connect two clocks here, picking divisors so the I2S clocks
++	 * out data at the same rate the DAC clocks it in ... and as close
++	 * as practical to the desired target rate.
++	 *
++	 * The DAC master clock (MCLK) is programmable, and is either 256
++	 * or (not here) 384 times the I2S output clock (BCLK).
++	 */
++
++	/* SSC clock / (bitrate * stereo * 16-bit). */
++	ssc_div = ssc_rate / (BITRATE_TARGET * 2 * 16);
++	ssc_div_min = ssc_rate / (BITRATE_MAX * 2 * 16);
++	ssc_div_max = ssc_rate / (BITRATE_MIN * 2 * 16);
++	max_tries = (ssc_div_max - ssc_div_min) / 2;
++
++	if (max_tries < 1)
++		max_tries = 1;
++
++	/* ssc_div must be a power of 2. */
++	ssc_div = (ssc_div + 1) & ~1UL;
++
++	if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN) {
++		ssc_div -= 2;
++		if ((ssc_rate / (ssc_div * 2 * 16)) > BITRATE_MAX)
++			return -ENXIO;
++	}
++
++	/* Search for a possible bitrate. */
++	do {
++		/* SSC clock / (ssc divider * 16-bit * stereo). */
++		if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN)
++			return -ENXIO;
++
++		/* 256 / (2 * 16) = 8 */
++		dac_rate_new = 8 * (ssc_rate / ssc_div);
++
++		status = clk_round_rate(chip->board->dac_clk, dac_rate_new);
++		if (status < 0)
++			return status;
++
++		/* Ignore difference smaller than 256 Hz. */
++		if ((status/256) == (dac_rate_new/256))
++			goto set_rate;
++
++		ssc_div += 2;
++	} while (--max_tries);
++
++	/* Not able to find a valid bitrate. */
++	return -ENXIO;
++
++set_rate:
++	status = clk_set_rate(chip->board->dac_clk, status);
++	if (status < 0)
++		return status;
++
++	/* Set divider in SSC device. */
++	ssc_writel(chip->ssc->regs, CMR, ssc_div/2);
++
++	/* SSC clock / (ssc divider * 16-bit * stereo). */
++	chip->bitrate = ssc_rate / (ssc_div * 16 * 2);
++
++	dev_info(&chip->spi->dev,
++			"at73c213: supported bitrate is %lu (%lu divider)\n",
++			chip->bitrate, ssc_div);
++
++	return 0;
++}
++
++static int snd_at73c213_pcm_open(struct snd_pcm_substream *substream)
++{
++	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++	struct snd_pcm_runtime *runtime = substream->runtime;
++
++	snd_at73c213_playback_hw.rate_min = chip->bitrate;
++	snd_at73c213_playback_hw.rate_max = chip->bitrate;
++	runtime->hw = snd_at73c213_playback_hw;
++	chip->substream = substream;
++
++	return 0;
++}
++
++static int snd_at73c213_pcm_close(struct snd_pcm_substream *substream)
++{
++	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++	chip->substream = NULL;
++	return 0;
++}
++
++static int snd_at73c213_pcm_hw_params(struct snd_pcm_substream *substream,
++				 struct snd_pcm_hw_params *hw_params)
++{
++	return snd_pcm_lib_malloc_pages(substream,
++					params_buffer_bytes(hw_params));
++}
++
++static int snd_at73c213_pcm_hw_free(struct snd_pcm_substream *substream)
++{
++	return snd_pcm_lib_free_pages(substream);
++}
++
++static int snd_at73c213_pcm_prepare(struct snd_pcm_substream *substream)
++{
++	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	int block_size;
++
++	block_size = frames_to_bytes(runtime, runtime->period_size);
++
++	chip->period = 0;
++
++	ssc_writel(chip->ssc->regs, PDC_TPR,
++			(long)runtime->dma_addr);
++	ssc_writel(chip->ssc->regs, PDC_TCR, runtime->period_size * 2);
++	ssc_writel(chip->ssc->regs, PDC_TNPR,
++			(long)runtime->dma_addr + block_size);
++	ssc_writel(chip->ssc->regs, PDC_TNCR, runtime->period_size * 2);
++
++	return 0;
++}
++
++static int snd_at73c213_pcm_trigger(struct snd_pcm_substream *substream,
++				   int cmd)
++{
++	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++	int retval = 0;
++
++	spin_lock(&chip->lock);
++
++	switch (cmd) {
++	case SNDRV_PCM_TRIGGER_START:
++		ssc_writel(chip->ssc->regs, IER, SSC_BIT(IER_ENDTX));
++		ssc_writel(chip->ssc->regs, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTEN));
++		break;
++	case SNDRV_PCM_TRIGGER_STOP:
++		ssc_writel(chip->ssc->regs, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTDIS));
++		ssc_writel(chip->ssc->regs, IDR, SSC_BIT(IDR_ENDTX));
++		break;
++	default:
++		dev_dbg(&chip->spi->dev, "spurious command %x\n", cmd);
++		retval = -EINVAL;
++		break;
++	}
++
++	spin_unlock(&chip->lock);
++
++	return retval;
++}
++
++static snd_pcm_uframes_t
++snd_at73c213_pcm_pointer(struct snd_pcm_substream *substream)
++{
++	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	snd_pcm_uframes_t pos;
++	unsigned long bytes;
++
++	bytes = ssc_readl(chip->ssc->regs, PDC_TPR)
++		- (unsigned long)runtime->dma_addr;
++
++	pos = bytes_to_frames(runtime, bytes);
++	if (pos >= runtime->buffer_size)
++		pos -= runtime->buffer_size;
++
++	return pos;
++}
++
++static struct snd_pcm_ops at73c213_playback_ops = {
++	.open		= snd_at73c213_pcm_open,
++	.close		= snd_at73c213_pcm_close,
++	.ioctl		= snd_pcm_lib_ioctl,
++	.hw_params	= snd_at73c213_pcm_hw_params,
++	.hw_free	= snd_at73c213_pcm_hw_free,
++	.prepare	= snd_at73c213_pcm_prepare,
++	.trigger	= snd_at73c213_pcm_trigger,
++	.pointer	= snd_at73c213_pcm_pointer,
++};
++
++static void snd_at73c213_pcm_free(struct snd_pcm *pcm)
++{
++	struct snd_at73c213 *chip = snd_pcm_chip(pcm);
++	if (chip->pcm) {
++		snd_pcm_lib_preallocate_free_for_all(chip->pcm);
++		chip->pcm = NULL;
++	}
++}
++
++static int __devinit snd_at73c213_pcm_new(struct snd_at73c213 *chip, int device)
++{
++	struct snd_pcm *pcm;
++	int retval;
++
++	retval = snd_pcm_new(chip->card, chip->card->shortname,
++			device, 1, 0, &pcm);
++	if (retval < 0)
++		goto out;
++
++	pcm->private_data = chip;
++	pcm->private_free = snd_at73c213_pcm_free;
++	pcm->info_flags = SNDRV_PCM_INFO_BLOCK_TRANSFER;
++	strcpy(pcm->name, "at73c213");
++	chip->pcm = pcm;
++
++	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &at73c213_playback_ops);
++
++	retval = snd_pcm_lib_preallocate_pages_for_all(chip->pcm,
++			SNDRV_DMA_TYPE_DEV, &chip->ssc->pdev->dev,
++			64 * 1024, 64 * 1024);
++out:
++	return retval;
++}
++
++static irqreturn_t snd_at73c213_interrupt(int irq, void *dev_id)
++{
++	struct snd_at73c213 *chip = dev_id;
++	struct snd_pcm_runtime *runtime = chip->substream->runtime;
++	u32 status;
++	int offset;
++	int block_size;
++	int next_period;
++	int retval = IRQ_NONE;
++
++	spin_lock(&chip->lock);
++
++	block_size = frames_to_bytes(runtime, runtime->period_size);
++	status = ssc_readl(chip->ssc->regs, IMR);
++
++	if (status & SSC_BIT(IMR_ENDTX)) {
++		chip->period++;
++		if (chip->period == runtime->periods)
++			chip->period = 0;
++		next_period = chip->period + 1;
++		if (next_period == runtime->periods)
++			next_period = 0;
++
++		offset = block_size * next_period;
++
++		ssc_writel(chip->ssc->regs, PDC_TNPR,
++				(long)runtime->dma_addr + offset);
++		ssc_writel(chip->ssc->regs, PDC_TNCR, runtime->period_size * 2);
++		retval = IRQ_HANDLED;
++	}
++
++	ssc_readl(chip->ssc->regs, IMR);
++	spin_unlock(&chip->lock);
++
++	if (status & SSC_BIT(IMR_ENDTX))
++		snd_pcm_period_elapsed(chip->substream);
++
++	return retval;
++}
++
++/*
++ * Mixer functions.
++ */
++static int snd_at73c213_mono_get(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++	int reg = kcontrol->private_value & 0xff;
++	int shift = (kcontrol->private_value >> 8) & 0xff;
++	int mask = (kcontrol->private_value >> 16) & 0xff;
++	int invert = (kcontrol->private_value >> 24) & 0xff;
++
++	spin_lock_irq(&chip->lock);
++
++	ucontrol->value.integer.value[0] = (chip->reg_image[reg] >> shift) & mask;
++
++	if (invert)
++		ucontrol->value.integer.value[0] =
++			(mask - ucontrol->value.integer.value[0]);
++
++	spin_unlock_irq(&chip->lock);
++
++	return 0;
++}
++
++static int snd_at73c213_mono_put(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++	int reg = kcontrol->private_value & 0xff;
++	int shift = (kcontrol->private_value >> 8) & 0xff;
++	int mask = (kcontrol->private_value >> 16) & 0xff;
++	int invert = (kcontrol->private_value >> 24) & 0xff;
++	int change, retval;
++	unsigned short val;
++
++	val = (ucontrol->value.integer.value[0] & mask);
++	if (invert)
++		val = mask - val;
++	val <<= shift;
++
++	spin_lock_irq(&chip->lock);
++
++	val = (chip->reg_image[reg] & ~(mask << shift)) | val;
++	change = val != chip->reg_image[reg];
++	retval = snd_at73c213_write_reg(chip, reg, val);
++
++	spin_unlock_irq(&chip->lock);
++
++	if (retval)
++		return retval;
++
++	return change;
++}
++
++static int snd_at73c213_stereo_info(struct snd_kcontrol *kcontrol,
++				  struct snd_ctl_elem_info *uinfo)
++{
++	int mask = (kcontrol->private_value >> 24) & 0xff;
++
++	if (mask == 1)
++		uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
++	else
++		uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++
++	uinfo->count = 2;
++	uinfo->value.integer.min = 0;
++	uinfo->value.integer.max = mask;
++
++	return 0;
++}
++
++static int snd_at73c213_stereo_get(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++	int left_reg = kcontrol->private_value & 0xff;
++	int right_reg = (kcontrol->private_value >> 8) & 0xff;
++	int shift_left = (kcontrol->private_value >> 16) & 0x07;
++	int shift_right = (kcontrol->private_value >> 19) & 0x07;
++	int mask = (kcontrol->private_value >> 24) & 0xff;
++	int invert = (kcontrol->private_value >> 22) & 1;
++
++	spin_lock_irq(&chip->lock);
++
++	ucontrol->value.integer.value[0] =
++		(chip->reg_image[left_reg] >> shift_left) & mask;
++	ucontrol->value.integer.value[1] =
++		(chip->reg_image[right_reg] >> shift_right) & mask;
++
++	if (invert) {
++		ucontrol->value.integer.value[0] =
++			(mask - ucontrol->value.integer.value[0]);
++		ucontrol->value.integer.value[1] =
++			(mask - ucontrol->value.integer.value[1]);
++	}
++
++	spin_unlock_irq(&chip->lock);
++
++	return 0;
++}
++
++static int snd_at73c213_stereo_put(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++	int left_reg = kcontrol->private_value & 0xff;
++	int right_reg = (kcontrol->private_value >> 8) & 0xff;
++	int shift_left = (kcontrol->private_value >> 16) & 0x07;
++	int shift_right = (kcontrol->private_value >> 19) & 0x07;
++	int mask = (kcontrol->private_value >> 24) & 0xff;
++	int invert = (kcontrol->private_value >> 22) & 1;
++	int change, retval;
++	unsigned short val1, val2;
++
++	val1 = ucontrol->value.integer.value[0] & mask;
++	val2 = ucontrol->value.integer.value[1] & mask;
++	if (invert) {
++		val1 = mask - val1;
++		val2 = mask - val2;
++	}
++	val1 <<= shift_left;
++	val2 <<= shift_right;
++
++	spin_lock_irq(&chip->lock);
++
++	val1 = (chip->reg_image[left_reg] & ~(mask << shift_left)) | val1;
++	val2 = (chip->reg_image[right_reg] & ~(mask << shift_right)) | val2;
++	change = val1 != chip->reg_image[left_reg]
++		|| val2 != chip->reg_image[right_reg];
++	retval = snd_at73c213_write_reg(chip, left_reg, val1);
++	if (retval) {
++		spin_unlock_irq(&chip->lock);
++		goto out;
++	}
++	retval = snd_at73c213_write_reg(chip, right_reg, val2);
++	if (retval) {
++		spin_unlock_irq(&chip->lock);
++		goto out;
++	}
++
++	spin_unlock_irq(&chip->lock);
++
++	return change;
++
++out:
++	return retval;
++}
++
++static int snd_at73c213_mono_switch_info(struct snd_kcontrol *kcontrol,
++				  struct snd_ctl_elem_info *uinfo)
++{
++	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
++	uinfo->count = 1;
++	uinfo->value.integer.min = 0;
++	uinfo->value.integer.max = 1;
++
++	return 0;
++}
++
++static int snd_at73c213_mono_switch_get(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++	int reg = kcontrol->private_value & 0xff;
++	int shift = (kcontrol->private_value >> 8) & 0xff;
++	int invert = (kcontrol->private_value >> 24) & 0xff;
++
++	spin_lock_irq(&chip->lock);
++
++	ucontrol->value.integer.value[0] = (chip->reg_image[reg] >> shift) & 0x01;
++
++	if (invert)
++		ucontrol->value.integer.value[0] =
++			(0x01 - ucontrol->value.integer.value[0]);
++
++	spin_unlock_irq(&chip->lock);
++
++	return 0;
++}
++
++static int snd_at73c213_mono_switch_put(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++	int reg = kcontrol->private_value & 0xff;
++	int shift = (kcontrol->private_value >> 8) & 0xff;
++	int mask = (kcontrol->private_value >> 16) & 0xff;
++	int invert = (kcontrol->private_value >> 24) & 0xff;
++	int change, retval;
++	unsigned short val;
++
++	if (ucontrol->value.integer.value[0])
++		val = mask;
++	else
++		val = 0;
++
++	if (invert)
++		val = mask - val;
++	val <<= shift;
++
++	spin_lock_irq(&chip->lock);
++
++	val |= (chip->reg_image[reg] & ~(mask << shift));
++	change = val != chip->reg_image[reg];
++
++	retval = snd_at73c213_write_reg(chip, reg, val);
++
++	spin_unlock_irq(&chip->lock);
++
++	if (retval)
++		return retval;
++
++	return change;
++}
++
++static int snd_at73c213_pa_volume_info(struct snd_kcontrol *kcontrol,
++				  struct snd_ctl_elem_info *uinfo)
++{
++	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++	uinfo->count = 1;
++	uinfo->value.integer.min = 0;
++	uinfo->value.integer.max = ((kcontrol->private_value >> 16) & 0xff) - 1;
++
++	return 0;
++}
++
++static int snd_at73c213_line_capture_volume_info(
++		struct snd_kcontrol *kcontrol,
++		struct snd_ctl_elem_info *uinfo)
++{
++	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++	uinfo->count = 2;
++	/* When inverted will give values 0x10001 => 0. */
++	uinfo->value.integer.min = 14;
++	uinfo->value.integer.max = 31;
++
++	return 0;
++}
++
++static int snd_at73c213_aux_capture_volume_info(
++		struct snd_kcontrol *kcontrol,
++		struct snd_ctl_elem_info *uinfo)
++{
++	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++	uinfo->count = 1;
++	/* When inverted will give values 0x10001 => 0. */
++	uinfo->value.integer.min = 14;
++	uinfo->value.integer.max = 31;
++
++	return 0;
++}
++
++#define AT73C213_MONO_SWITCH(xname, xindex, reg, shift, mask, invert)	\
++{									\
++	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,				\
++	.name = xname,							\
++	.index = xindex,						\
++	.info = snd_at73c213_mono_switch_info,				\
++	.get = snd_at73c213_mono_switch_get,				\
++	.put = snd_at73c213_mono_switch_put,				\
++	.private_value = (reg | (shift << 8) | (mask << 16) | (invert << 24)) \
++}
++
++#define AT73C213_STEREO(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \
++{									\
++	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,				\
++	.name = xname,							\
++	.index = xindex,						\
++	.info = snd_at73c213_stereo_info,				\
++	.get = snd_at73c213_stereo_get,					\
++	.put = snd_at73c213_stereo_put,					\
++	.private_value = (left_reg | (right_reg << 8)			\
++			| (shift_left << 16) | (shift_right << 19)	\
++			| (mask << 24) | (invert << 22))		\
++}
++
++static struct snd_kcontrol_new snd_at73c213_controls[] __devinitdata = {
++AT73C213_STEREO("Master Playback Volume", 0, DAC_LMPG, DAC_RMPG, 0, 0, 0x1f, 1),
++AT73C213_STEREO("Master Playback Switch", 0, DAC_LMPG, DAC_RMPG, 5, 5, 1, 1),
++AT73C213_STEREO("PCM Playback Volume", 0, DAC_LLOG, DAC_RLOG, 0, 0, 0x1f, 1),
++AT73C213_STEREO("PCM Playback Switch", 0, DAC_LLOG, DAC_RLOG, 5, 5, 1, 1),
++AT73C213_MONO_SWITCH("Mono PA Playback Switch", 0, DAC_CTRL, DAC_CTRL_ONPADRV, 0x01, 0),
++{
++	.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
++	.name	= "PA Playback Volume",
++	.index	= 0,
++	.info	= snd_at73c213_pa_volume_info,
++	.get	= snd_at73c213_mono_get,
++	.put	= snd_at73c213_mono_put,
++	.private_value	= PA_CTRL | (PA_CTRL_APAGAIN << 8) | (0x0f << 16) | (1 << 24),
++},
++AT73C213_MONO_SWITCH("PA High Gain Playback Switch", 0, PA_CTRL, PA_CTRL_APALP, 0x01, 1),
++AT73C213_MONO_SWITCH("PA Playback Switch", 0, PA_CTRL, PA_CTRL_APAON, 0x01, 0),
++{
++	.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
++	.name	= "Aux Capture Volume",
++	.index	= 0,
++	.info	= snd_at73c213_aux_capture_volume_info,
++	.get	= snd_at73c213_mono_get,
++	.put	= snd_at73c213_mono_put,
++	.private_value	= DAC_AUXG | (0 << 8) | (0x1f << 16) | (1 << 24),
++},
++AT73C213_MONO_SWITCH("Aux Capture Switch", 0, DAC_CTRL, DAC_CTRL_ONAUXIN, 0x01, 0),
++{
++	.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
++	.name	= "Line Capture Volume",
++	.index	= 0,
++	.info	= snd_at73c213_line_capture_volume_info,
++	.get	= snd_at73c213_stereo_get,
++	.put	= snd_at73c213_stereo_put,
++	.private_value	= DAC_LLIG | (DAC_RLIG << 8) | (0 << 16) | (0 << 19)
++		| (0x1f << 24) | (1 << 22),
++},
++AT73C213_MONO_SWITCH("Line Capture Switch", 0, DAC_CTRL, 0, 0x03, 0),
++};
++
++static int __devinit snd_at73c213_mixer(struct snd_at73c213 *chip)
++{
++	struct snd_card *card;
++	int errval, idx;
++
++	if (chip == NULL || chip->pcm == NULL)
++		return -EINVAL;
++
++	card = chip->card;
++
++	strcpy(card->mixername, chip->pcm->name);
++
++	for (idx = 0; idx < ARRAY_SIZE(snd_at73c213_controls); idx++) {
++		errval = snd_ctl_add(card,
++				snd_ctl_new1(&snd_at73c213_controls[idx],
++					chip));
++		if (errval < 0)
++			goto cleanup;
++	}
++
++	return 0;
++
++cleanup:
++	for (idx = 1; idx < ARRAY_SIZE(snd_at73c213_controls) + 1; idx++) {
++		struct snd_kcontrol *kctl;
++		kctl = snd_ctl_find_numid(card, idx);
++		if (kctl)
++			snd_ctl_remove(card, kctl);
++	}
++	return errval;
++}
++
++/*
++ * Device functions
++ */
++static int snd_at73c213_ssc_init(struct snd_at73c213 *chip)
++{
++	/*
++	 * Continuous clock output.
++	 * Starts on falling TF.
++	 * Delay 1 cycle (1 bit).
++	 * Periode is 16 bit (16 - 1).
++	 */
++	ssc_writel(chip->ssc->regs, TCMR,
++			SSC_BF(TCMR_CKO, 1)
++			| SSC_BF(TCMR_START, 4)
++			| SSC_BF(TCMR_STTDLY, 1)
++			| SSC_BF(TCMR_PERIOD, 16 - 1));
++	/*
++	 * Data length is 16 bit (16 - 1).
++	 * Transmit MSB first.
++	 * Transmit 2 words each transfer.
++	 * Frame sync length is 16 bit (16 - 1).
++	 * Frame starts on negative pulse.
++	 */
++	ssc_writel(chip->ssc->regs, TFMR,
++			SSC_BF(TFMR_DATLEN, 16 - 1)
++			| SSC_BIT(TFMR_MSBF)
++			| SSC_BF(TFMR_DATNB, 1)
++			| SSC_BF(TFMR_FSLEN, 16 - 1)
++			| SSC_BF(TFMR_FSOS, 1));
++
++	return 0;
++}
++
++static int snd_at73c213_chip_init(struct snd_at73c213 *chip)
++{
++	int retval;
++	unsigned char dac_ctrl = 0;
++
++	retval = snd_at73c213_set_bitrate(chip);
++	if (retval)
++		goto out;
++
++	/* Enable DAC master clock. */
++	clk_enable(chip->board->dac_clk);
++
++	/* Initialize at73c213 on SPI bus. */
++	retval = snd_at73c213_write_reg(chip, DAC_RST, 0x04);
++	if (retval)
++		goto out_clk;
++	msleep(1);
++	retval = snd_at73c213_write_reg(chip, DAC_RST, 0x03);
++	if (retval)
++		goto out_clk;
++
++	/* Precharge everything. */
++	retval = snd_at73c213_write_reg(chip, DAC_PRECH, 0xff);
++	if (retval)
++		goto out_clk;
++	retval = snd_at73c213_write_reg(chip, PA_CTRL, (1<<PA_CTRL_APAPRECH));
++	if (retval)
++		goto out_clk;
++	retval = snd_at73c213_write_reg(chip, DAC_CTRL,
++			(1<<DAC_CTRL_ONLNOL) | (1<<DAC_CTRL_ONLNOR));
++	if (retval)
++		goto out_clk;
++
++	msleep(50);
++
++	/* Stop precharging PA. */
++	retval = snd_at73c213_write_reg(chip, PA_CTRL,
++			(1<<PA_CTRL_APALP) | 0x0f);
++	if (retval)
++		goto out_clk;
++
++	msleep(450);
++
++	/* Stop precharging DAC, turn on master power. */
++	retval = snd_at73c213_write_reg(chip, DAC_PRECH, (1<<DAC_PRECH_ONMSTR));
++	if (retval)
++		goto out_clk;
++
++	msleep(1);
++
++	/* Turn on DAC. */
++	dac_ctrl = (1<<DAC_CTRL_ONDACL) | (1<<DAC_CTRL_ONDACR)
++		| (1<<DAC_CTRL_ONLNOL) | (1<<DAC_CTRL_ONLNOR);
++
++	retval = snd_at73c213_write_reg(chip, DAC_CTRL, dac_ctrl);
++	if (retval)
++		goto out_clk;
++
++	/* Mute sound. */
++	retval = snd_at73c213_write_reg(chip, DAC_LMPG, 0x3f);
++	if (retval)
++		goto out_clk;
++	retval = snd_at73c213_write_reg(chip, DAC_RMPG, 0x3f);
++	if (retval)
++		goto out_clk;
++	retval = snd_at73c213_write_reg(chip, DAC_LLOG, 0x3f);
++	if (retval)
++		goto out_clk;
++	retval = snd_at73c213_write_reg(chip, DAC_RLOG, 0x3f);
++	if (retval)
++		goto out_clk;
++	retval = snd_at73c213_write_reg(chip, DAC_LLIG, 0x11);
++	if (retval)
++		goto out_clk;
++	retval = snd_at73c213_write_reg(chip, DAC_RLIG, 0x11);
++	if (retval)
++		goto out_clk;
++	retval = snd_at73c213_write_reg(chip, DAC_AUXG, 0x11);
++	if (retval)
++		goto out_clk;
++
++	/* Enable I2S device, i.e. clock output. */
++	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN));
++
++	goto out;
++
++out_clk:
++	clk_disable(chip->board->dac_clk);
++out:
++	return retval;
++}
++
++static int snd_at73c213_dev_free(struct snd_device *device)
++{
++	struct snd_at73c213 *chip = device->device_data;
++
++	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
++	if (chip->irq >= 0) {
++		free_irq(chip->irq, chip);
++		chip->irq = -1;
++	}
++
++	return 0;
++}
++
++static int __devinit snd_at73c213_dev_init(struct snd_card *card,
++					 struct spi_device *spi)
++{
++	static struct snd_device_ops ops = {
++		.dev_free	= snd_at73c213_dev_free,
++	};
++	struct snd_at73c213 *chip = get_chip(card);
++	int irq, retval;
++
++	irq = chip->ssc->irq;
++	if (irq < 0)
++		return irq;
++
++	spin_lock_init(&chip->lock);
++	chip->card = card;
++	chip->irq = -1;
++
++	retval = request_irq(irq, snd_at73c213_interrupt, 0, "at73c213", chip);
++	if (retval) {
++		dev_dbg(&chip->spi->dev, "unable to request irq %d\n", irq);
++		goto out;
++	}
++	chip->irq = irq;
++
++	memcpy(&chip->reg_image, &snd_at73c213_original_image,
++			sizeof(snd_at73c213_original_image));
++
++	retval = snd_at73c213_ssc_init(chip);
++	if (retval)
++		goto out_irq;
++
++	retval = snd_at73c213_chip_init(chip);
++	if (retval)
++		goto out_irq;
++
++	retval = snd_at73c213_pcm_new(chip, 0);
++	if (retval)
++		goto out_irq;
++
++	retval = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
++	if (retval)
++		goto out_irq;
++
++	retval = snd_at73c213_mixer(chip);
++	if (retval)
++		goto out_snd_dev;
++
++	snd_card_set_dev(card, &spi->dev);
++
++	goto out;
++
++out_snd_dev:
++	snd_device_free(card, chip);
++out_irq:
++	free_irq(chip->irq, chip);
++	chip->irq = -1;
++out:
++	return retval;
++}
++
++static int snd_at73c213_probe(struct spi_device *spi)
++{
++	struct snd_card			*card;
++	struct snd_at73c213		*chip;
++	struct at73c213_board_info	*board;
++	int				retval;
++	char				id[16];
++
++	board = spi->dev.platform_data;
++	if (!board) {
++		dev_dbg(&spi->dev, "no platform_data\n");
++		return -ENXIO;
++	}
++
++	if (!board->dac_clk) {
++		dev_dbg(&spi->dev, "no DAC clk\n");
++		return -ENXIO;
++	}
++
++	if (IS_ERR(board->dac_clk)) {
++		dev_dbg(&spi->dev, "no DAC clk\n");
++		return PTR_ERR(board->dac_clk);
++	}
++
++	retval = -ENOMEM;
++
++	/* Allocate "card" using some unused identifiers. */
++	snprintf(id, sizeof id, "at73c213_%d", board->ssc_id);
++	card = snd_card_new(-1, id, THIS_MODULE, sizeof(struct snd_at73c213));
++	if (!card)
++		goto out;
++
++	chip = card->private_data;
++	chip->spi = spi;
++	chip->board = board;
++
++	chip->ssc = ssc_request(board->ssc_id);
++	if (IS_ERR(chip->ssc)) {
++		dev_dbg(&spi->dev, "could not get ssc%d device\n",
++				board->ssc_id);
++		retval = PTR_ERR(chip->ssc);
++		goto out_card;
++	}
++
++	retval = snd_at73c213_dev_init(card, spi);
++	if (retval)
++		goto out_ssc;
++
++	strcpy(card->driver, "at73c213");
++	strcpy(card->shortname, board->shortname);
++	sprintf(card->longname, "%s on irq %d", card->shortname, chip->irq);
++
++	retval = snd_card_register(card);
++	if (retval)
++		goto out_ssc;
++
++	dev_set_drvdata(&spi->dev, card);
++
++	goto out;
++
++out_ssc:
++	ssc_free(chip->ssc);
++out_card:
++	snd_card_free(card);
++out:
++	return retval;
++}
++
++static int __devexit snd_at73c213_remove(struct spi_device *spi)
++{
++	struct snd_card *card = dev_get_drvdata(&spi->dev);
++	struct snd_at73c213 *chip = card->private_data;
++	int retval;
++
++	/* Stop playback. */
++	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
++
++	/* Mute sound. */
++	retval = snd_at73c213_write_reg(chip, DAC_LMPG, 0x3f);
++	if (retval)
++		goto out;
++	retval = snd_at73c213_write_reg(chip, DAC_RMPG, 0x3f);
++	if (retval)
++		goto out;
++	retval = snd_at73c213_write_reg(chip, DAC_LLOG, 0x3f);
++	if (retval)
++		goto out;
++	retval = snd_at73c213_write_reg(chip, DAC_RLOG, 0x3f);
++	if (retval)
++		goto out;
++	retval = snd_at73c213_write_reg(chip, DAC_LLIG, 0x11);
++	if (retval)
++		goto out;
++	retval = snd_at73c213_write_reg(chip, DAC_RLIG, 0x11);
++	if (retval)
++		goto out;
++	retval = snd_at73c213_write_reg(chip, DAC_AUXG, 0x11);
++	if (retval)
++		goto out;
++
++	/* Turn off PA. */
++	retval = snd_at73c213_write_reg(chip, PA_CTRL, (chip->reg_image[PA_CTRL]|0x0f));
++	if (retval)
++		goto out;
++	msleep(10);
++	retval = snd_at73c213_write_reg(chip, PA_CTRL, (1<<PA_CTRL_APALP)|0x0f);
++	if (retval)
++		goto out;
++
++	/* Turn off external DAC. */
++	retval = snd_at73c213_write_reg(chip, DAC_CTRL, 0x0c);
++	if (retval)
++		goto out;
++	msleep(2);
++	retval = snd_at73c213_write_reg(chip, DAC_CTRL, 0x00);
++	if (retval)
++		goto out;
++
++	/* Turn off master power. */
++	retval = snd_at73c213_write_reg(chip, DAC_PRECH, 0x00);
++	if (retval)
++		goto out;
++
++out:
++	/* Stop DAC master clock. */
++	clk_disable(chip->board->dac_clk);
++
++	ssc_free(chip->ssc);
++	snd_card_free(card);
++	dev_set_drvdata(&spi->dev, NULL);
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++static int snd_at73c213_suspend(struct spi_device *spi, pm_message_t msg)
++{
++	struct snd_card *card = dev_get_drvdata(&spi->dev);
++	struct snd_at73c213 *chip = card->private_data;
++
++	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
++	clk_disable(chip->board->dac_clk);
++
++	return 0;
++}
++
++static int snd_at73c213_resume(struct spi_device *spi)
++{
++	struct snd_card *card = dev_get_drvdata(&spi->dev);
++	struct snd_at73c213 *chip = card->private_data;
++
++	clk_enable(chip->board->dac_clk);
++	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN));
++
++	return 0;
++}
++#else
++#define snd_at73c213_suspend NULL
++#define snd_at73c213_resume NULL
++#endif
++
++static struct spi_driver at73c213_driver = {
++	.driver		= {
++		.name	= "at73c213",
++	},
++	.probe		= snd_at73c213_probe,
++	.suspend	= snd_at73c213_suspend,
++	.resume		= snd_at73c213_resume,
++	.remove		= __devexit_p(snd_at73c213_remove),
++};
++
++static int __init at73c213_init(void)
++{
++	return spi_register_driver(&at73c213_driver);
++}
++module_init(at73c213_init);
++
++static void __exit at73c213_exit(void)
++{
++	spi_unregister_driver(&at73c213_driver);
++}
++module_exit(at73c213_exit);
++
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("Sound driver for AT73C213 with Atmel SSC");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.22.1/sound/spi/Makefile
+===================================================================
+--- linux-2.6.22.1/sound/spi/Makefile	(revision 0)
++++ linux-2.6.22.1/sound/spi/Makefile	(revision 0)
+@@ -0,0 +1,5 @@
++# Makefile for SPI drivers
++
++snd-at73c213-objs		:= at73c213.o
++
++obj-$(CONFIG_SND_AT73C213)	+= snd-at73c213.o
+Index: linux-2.6.22.1/sound/spi/at73c213.h
+===================================================================
+--- linux-2.6.22.1/sound/spi/at73c213.h	(revision 0)
++++ linux-2.6.22.1/sound/spi/at73c213.h	(revision 0)
+@@ -0,0 +1,119 @@
++/*
++ * Driver for the AT73C213 16-bit stereo DAC on Atmel ATSTK1000
++ *
++ * Copyright (C) 2006 - 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++ * 02111-1307, USA.
++ *
++ * The full GNU General Public License is included in this
++ * distribution in the file called COPYING.
++ */
++
++#ifndef _SND_AT73C213_H
++#define _SND_AT73C213_H
++
++/* DAC control register */
++#define DAC_CTRL		0x00
++#define DAC_CTRL_ONPADRV	7
++#define DAC_CTRL_ONAUXIN	6
++#define DAC_CTRL_ONDACR		5
++#define DAC_CTRL_ONDACL		4
++#define DAC_CTRL_ONLNOR		3
++#define DAC_CTRL_ONLNOL		2
++#define DAC_CTRL_ONLNIR		1
++#define DAC_CTRL_ONLNIL		0
++
++/* DAC left line in gain register */
++#define DAC_LLIG		0x01
++#define DAC_LLIG_LLIG		0
++
++/* DAC right line in gain register */
++#define DAC_RLIG		0x02
++#define DAC_RLIG_RLIG		0
++
++/* DAC Left Master Playback Gain Register */
++#define DAC_LMPG		0x03
++#define DAC_LMPG_LMPG		0
++
++/* DAC Right Master Playback Gain Register */
++#define DAC_RMPG		0x04
++#define DAC_RMPG_RMPG		0
++
++/* DAC Left Line Out Gain Register */
++#define DAC_LLOG		0x05
++#define DAC_LLOG_LLOG		0
++
++/* DAC Right Line Out Gain Register */
++#define DAC_RLOG		0x06
++#define DAC_RLOG_RLOG		0
++
++/* DAC Output Level Control Register */
++#define DAC_OLC			0x07
++#define DAC_OLC_RSHORT		7
++#define DAC_OLC_ROLC		4
++#define DAC_OLC_LSHORT		3
++#define DAC_OLC_LOLC		0
++
++/* DAC Mixer Control Register */
++#define DAC_MC			0x08
++#define DAC_MC_INVR		5
++#define DAC_MC_INVL		4
++#define DAC_MC_RMSMIN2		3
++#define DAC_MC_RMSMIN1		2
++#define DAC_MC_LMSMIN2		1
++#define DAC_MC_LMSMIN1		0
++
++/* DAC Clock and Sampling Frequency Control Register */
++#define DAC_CSFC		0x09
++#define DAC_CSFC_OVRSEL		4
++
++/* DAC Miscellaneous Register */
++#define DAC_MISC		0x0A
++#define DAC_MISC_VCMCAPSEL	7
++#define DAC_MISC_DINTSEL	4
++#define DAC_MISC_DITHEN		3
++#define DAC_MISC_DEEMPEN	2
++#define DAC_MISC_NBITS		0
++
++/* DAC Precharge Control Register */
++#define DAC_PRECH		0x0C
++#define DAC_PRECH_PRCHGPDRV	7
++#define DAC_PRECH_PRCHGAUX1	6
++#define DAC_PRECH_PRCHGLNOR	5
++#define DAC_PRECH_PRCHGLNOL	4
++#define DAC_PRECH_PRCHGLNIR	3
++#define DAC_PRECH_PRCHGLNIL	2
++#define DAC_PRECH_PRCHG		1
++#define DAC_PRECH_ONMSTR	0
++
++/* DAC Auxiliary Input Gain Control Register */
++#define DAC_AUXG		0x0D
++#define DAC_AUXG_AUXG		0
++
++/* DAC Reset Register */
++#define DAC_RST			0x10
++#define DAC_RST_RESMASK		2
++#define DAC_RST_RESFILZ		1
++#define DAC_RST_RSTZ		0
++
++/* Power Amplifier Control Register */
++#define PA_CTRL			0x11
++#define PA_CTRL_APAON		6
++#define PA_CTRL_APAPRECH	5
++#define PA_CTRL_APALP		4
++#define PA_CTRL_APAGAIN		0
++
++#endif /* _SND_AT73C213_H */
+Index: linux-2.6.22.1/sound/Makefile
+===================================================================
+--- linux-2.6.22.1/sound/Makefile	(revision 1)
++++ linux-2.6.22.1/sound/Makefile	(arbetskopia)
+@@ -5,7 +5,8 @@
+ obj-$(CONFIG_SOUND_PRIME) += sound_firmware.o
+ obj-$(CONFIG_SOUND_PRIME) += oss/
+ obj-$(CONFIG_DMASOUND) += oss/
+-obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ sparc/ parisc/ pcmcia/ mips/ soc/
++obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ \
++		      sparc/ spi/ parisc/ pcmcia/ mips/ soc/
+ obj-$(CONFIG_SND_AOA) += aoa/
+ 
+ # This one must be compilable even if sound is configured out
+Index: linux-2.6.22.1/init/do_mounts.c
+===================================================================
+--- linux-2.6.22.1/init/do_mounts.c	(revision 1)
++++ linux-2.6.22.1/init/do_mounts.c	(arbetskopia)
+@@ -25,6 +25,7 @@
+ int root_mountflags = MS_RDONLY | MS_SILENT;
+ char * __initdata root_device_name;
+ static char __initdata saved_root_name[64];
++int __initdata root_wait;
+ 
+ dev_t ROOT_DEV;
+ 
+@@ -216,6 +217,14 @@
+ 
+ __setup("root=", root_dev_setup);
+ 
++static int __init rootwait_setup(char *line)
++{
++	root_wait = simple_strtol(line,NULL,0);
++	return 1;
++}
++
++__setup("rootwait=", rootwait_setup);
++
+ static char * __initdata root_mount_data;
+ static int __init root_data_setup(char *str)
+ {
+@@ -438,11 +447,24 @@
+ 			root_device_name += 5;
+ 	}
+ 
+-	is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
+-
+ 	if (initrd_load())
+ 		goto out;
+ 
++	/* wait for any asynchronous scanning to complete */
++	if ((ROOT_DEV == 0) && root_wait) {
++		printk(KERN_INFO "Waiting for root device %s...\n",
++			saved_root_name);
++		do {
++			while (driver_probe_done() != 0)
++				msleep(100);
++			ROOT_DEV = name_to_dev_t(saved_root_name);
++			if (ROOT_DEV == 0)
++				msleep(100);
++		} while (ROOT_DEV == 0);
++	}
++
++	is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
++
+ 	if (is_floppy && rd_doload && rd_load_disk(0))
+ 		ROOT_DEV = Root_RAM0;
+ 
+Index: linux-2.6.22.1/MAINTAINERS
+===================================================================
+--- linux-2.6.22.1/MAINTAINERS	(revision 1)
++++ linux-2.6.22.1/MAINTAINERS	(arbetskopia)
+@@ -674,6 +674,13 @@
  M:	hskinnemoen@atmel.com
  S:	Supported
  
@@ -16,11 +2737,8285 @@ index df40a4e..3c5cfef 100644
  ATMEL WIRELESS DRIVER
  P:	Simon Kelley
  M:	simon@thekelleys.org.uk
-diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
-index 3ec7658..ec6c7c5 100644
---- a/arch/avr32/Kconfig
-+++ b/arch/avr32/Kconfig
-@@ -113,6 +113,13 @@ config BOARD_ATNGW100
+Index: linux-2.6.22.1/arch/arm/boot/compressed/head-at91rm9200.S
+===================================================================
+--- linux-2.6.22.1/arch/arm/boot/compressed/head-at91rm9200.S	(revision 1)
++++ linux-2.6.22.1/arch/arm/boot/compressed/head-at91rm9200.S	(arbetskopia)
+@@ -73,6 +73,12 @@
+ 		cmp	r7, r3
+ 		beq	99f
+ 
++		@ Promwad Chub : 1181
++		mov	r3,	#(MACH_TYPE_CHUB & 0xff)
++		orr	r3, r3, #(MACH_TYPE_CHUB & 0xff00)
++		cmp	r7, r3
++		beq	99f
++
+ 		@ Unknown board, use the AT91RM9200DK board
+ 		@ mov	r7, #MACH_TYPE_AT91RM9200
+ 		mov	r7,	#(MACH_TYPE_AT91RM9200DK & 0xff)
+Index: linux-2.6.22.1/arch/arm/mach-at91/board-kb9202.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/board-kb9202.c	(revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/board-kb9202.c	(arbetskopia)
+@@ -37,6 +37,8 @@
+ #include <asm/arch/board.h>
+ #include <asm/arch/gpio.h>
+ 
++#include <asm/arch/at91rm9200_mc.h>
++
+ #include "generic.h"
+ 
+ 
+@@ -111,6 +113,48 @@
+ 	.partition_info	= nand_partitions,
+ };
+ 
++
++#if defined(CONFIG_FB_S1D15605)
++#warning "Rather pass reset pin via platform_data"
++static struct resource kb9202_lcd_resources[] = {
++	[0] = {
++		.start	= AT91_CHIPSELECT_2,
++		.end	= AT91_CHIPSELECT_2 + 0x200FF,
++		.flags	= IORESOURCE_MEM
++	},
++	[1] = {	/* reset pin */
++		.start	= AT91_PIN_PC22,
++		.end	= AT91_PIN_PC22,
++		.flags	= IORESOURCE_MEM
++	},
++};
++
++static struct platform_device kb9202_lcd_device = {
++	.name		= "s1d15605fb",
++	.id		= 0,
++	.num_resources	= ARRAY_SIZE(kb9202_lcd_resources),
++	.resource	= kb9202_lcd_resources,
++};
++
++static void __init kb9202_add_device_lcd(void)
++{
++ 	/* In case the boot loader did not set the chip select mode and timing */
++	at91_sys_write(AT91_SMC_CSR(2),
++		AT91_SMC_WSEN | AT91_SMC_NWS_(18) | AT91_SMC_TDF_(1) | AT91_SMC_DBW_8 |
++		AT91_SMC_RWSETUP_(1) | AT91_SMC_RWHOLD_(1));
++
++	/* Backlight pin = output, off */
++	at91_set_gpio_output(AT91_PIN_PC23, 0);
++
++	/* Reset pin = output, in reset */
++	at91_set_gpio_output(AT91_PIN_PC22, 0);
++
++	platform_device_register(&kb9202_lcd_device);
++}
++#else
++static void __init kb9202_add_device_lcd(void) {}
++#endif
++
+ static void __init kb9202_board_init(void)
+ {
+ 	/* Serial */
+@@ -129,6 +173,8 @@
+ 	at91_add_device_spi(NULL, 0);
+ 	/* NAND */
+ 	at91_add_device_nand(&kb9202_nand_data);
++	/* LCD	*/
++	kb9202_add_device_lcd();
+ }
+ 
+ MACHINE_START(KB9200, "KB920x")
+Index: linux-2.6.22.1/arch/arm/mach-at91/Kconfig
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/Kconfig	(revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/Kconfig	(arbetskopia)
+@@ -97,6 +97,12 @@
+ 	help
+ 	  Select this if you are using Sperry-Sun's KAFA board.
+ 
++config MACH_CHUB
++	bool "Promwad Chub board"
++	depends on ARCH_AT91RM9200
++	help
++	  Select this if you are using Promwad's Chub board.
++
+ endif
+ 
+ # ----------------------------------------------------------
+@@ -121,6 +127,13 @@
+ 	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
+ 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
+ 
++config MACH_CAM60
++	bool "KwikByte CAM60 board"
++	depends on ARCH_AT91SAM9260
++	help
++	  Select this if you are using KwikByte's CAM60 board based on the Atmel AT91SAM9260.
++	  <http://www.kwikbyte.com>
++
+ endif
+ 
+ # ----------------------------------------------------------
+@@ -184,6 +197,20 @@
+ 	  On AT91SAM926x boards both types of NAND flash can be present
+ 	  (8 and 16 bit data bus width).
+ 
++config CSB300_WAKE_SW0
++	bool "CSB300 SW0 irq0 wakeup"
++	depends on MACH_CSB337 && PM
++	help
++	  If you have a CSB300 connected to your CSB337, this lets
++	  SW0 serve as a wakeup button.  It uses IRQ0.
++
++config CSB300_WAKE_SW1
++	bool "CSB300 SW1 gpio wakeup"
++	depends on MACH_CSB337 && PM
++	help
++	  If you have a CSB300 connected to your CSB337, this lets
++	  SW1 serve as a wakeup button.  It uses GPIO.
++
+ # ----------------------------------------------------------
+ 
+ comment "AT91 Feature Selections"
+@@ -194,6 +221,20 @@
+ 	  Select this if you need to program one or more of the PCK0..PCK3
+ 	  programmable clock outputs.
+ 
++config ATMEL_TCLIB
++	bool "Timer/Counter Library"
++	help
++	  Select this if you want a library to allocate the Timer/Counter
++	  blocks found on many Atmel processors.  This facilitates using
++	  these modules despite processor differences.
++
++config AT91_SLOW_CLOCK
++	bool "Suspend-to-RAM uses slow clock mode (EXPERIMENTAL)"
++	depends on PM && EXPERIMENTAL
++	help
++	  Select this if you wish to put the CPU into slow clock mode
++	  while in the "Suspend to RAM" state, to save more power.
++
+ endmenu
+ 
+ endif
+Index: linux-2.6.22.1/arch/arm/mach-at91/at91sam9260.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/at91sam9260.c	(revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/at91sam9260.c	(arbetskopia)
+@@ -269,6 +269,33 @@
+ 
+ 
+ /* --------------------------------------------------------------------
++ *  Timer/Counter library initialization
++ * -------------------------------------------------------------------- */
++#ifdef CONFIG_ATMEL_TCLIB
++
++#include "tclib.h"
++
++static struct atmel_tcblock at91sam9260_tcblocks[] = {
++	[0] = {
++		.physaddr	= AT91SAM9260_BASE_TCB0,
++		.irq		= { AT91SAM9260_ID_TC0, AT91SAM9260_ID_TC1, AT91SAM9260_ID_TC2 },
++		.clk		= { &tc0_clk, &tc1_clk, &tc2_clk },
++	},
++	[1] = {
++		.physaddr	= AT91SAM9260_BASE_TCB1,
++		.irq		= { AT91SAM9260_ID_TC3, AT91SAM9260_ID_TC4, AT91SAM9260_ID_TC5 },
++		.clk		= { &tc3_clk, &tc4_clk, &tc5_clk },
++	},
++};
++
++#define at91sam9260_tc_init()	atmel_tc_init(at91sam9260_tcblocks, ARRAY_SIZE(at91sam9260_tcblocks))
++
++#else
++#define at91sam9260_tc_init()	do {} while(0)
++#endif
++
++
++/* --------------------------------------------------------------------
+  *  AT91SAM9260 processor initialization
+  * -------------------------------------------------------------------- */
+ 
+@@ -315,6 +342,9 @@
+ 
+ 	/* Register GPIO subsystem */
+ 	at91_gpio_init(at91sam9260_gpio, 3);
++
++	/* Initialize the Timer/Counter blocks */
++	at91sam9260_tc_init();
+ }
+ 
+ /* --------------------------------------------------------------------
+@@ -327,30 +357,30 @@
+ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 	7,	/* Advanced Interrupt Controller */
+ 	7,	/* System Peripherals */
+-	0,	/* Parallel IO Controller A */
+-	0,	/* Parallel IO Controller B */
+-	0,	/* Parallel IO Controller C */
++	1,	/* Parallel IO Controller A */
++	1,	/* Parallel IO Controller B */
++	1,	/* Parallel IO Controller C */
+ 	0,	/* Analog-to-Digital Converter */
+-	6,	/* USART 0 */
+-	6,	/* USART 1 */
+-	6,	/* USART 2 */
++	5,	/* USART 0 */
++	5,	/* USART 1 */
++	5,	/* USART 2 */
+ 	0,	/* Multimedia Card Interface */
+-	4,	/* USB Device Port */
+-	0,	/* Two-Wire Interface */
+-	6,	/* Serial Peripheral Interface 0 */
+-	6,	/* Serial Peripheral Interface 1 */
++	2,	/* USB Device Port */
++	6,	/* Two-Wire Interface */
++	5,	/* Serial Peripheral Interface 0 */
++	5,	/* Serial Peripheral Interface 1 */
+ 	5,	/* Serial Synchronous Controller */
+ 	0,
+ 	0,
+ 	0,	/* Timer Counter 0 */
+ 	0,	/* Timer Counter 1 */
+ 	0,	/* Timer Counter 2 */
+-	3,	/* USB Host port */
++	2,	/* USB Host port */
+ 	3,	/* Ethernet */
+ 	0,	/* Image Sensor Interface */
+-	6,	/* USART 3 */
+-	6,	/* USART 4 */
+-	6,	/* USART 5 */
++	5,	/* USART 3 */
++	5,	/* USART 4 */
++	5,	/* USART 5 */
+ 	0,	/* Timer Counter 3 */
+ 	0,	/* Timer Counter 4 */
+ 	0,	/* Timer Counter 5 */
+Index: linux-2.6.22.1/arch/arm/mach-at91/at91sam9261.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/at91sam9261.c	(revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/at91sam9261.c	(arbetskopia)
+@@ -247,6 +247,28 @@
+ 
+ 
+ /* --------------------------------------------------------------------
++ *  Timer/Counter library initialization
++ * -------------------------------------------------------------------- */
++#ifdef CONFIG_ATMEL_TCLIB
++
++#include "tclib.h"
++
++static struct atmel_tcblock at91sam9261_tcblocks[] = {
++	[0] = {
++		.physaddr	= AT91SAM9261_BASE_TCB0,
++		.irq		= { AT91SAM9261_ID_TC0, AT91SAM9261_ID_TC1, AT91SAM9261_ID_TC2 },
++		.clk		= { &tc0_clk, &tc1_clk, &tc2_clk },
++	}
++};
++
++#define at91sam9261_tc_init()	atmel_tc_init(at91sam9261_tcblocks, ARRAY_SIZE(at91sam9261_tcblocks))
++
++#else
++#define at91sam9261_tc_init()	do {} while(0)
++#endif
++
++
++/* --------------------------------------------------------------------
+  *  AT91SAM9261 processor initialization
+  * -------------------------------------------------------------------- */
+ 
+@@ -267,6 +289,9 @@
+ 
+ 	/* Register GPIO subsystem */
+ 	at91_gpio_init(at91sam9261_gpio, 3);
++
++	/* Initialize the Timer/Counter blocks */
++	at91sam9261_tc_init();
+ }
+ 
+ /* --------------------------------------------------------------------
+@@ -279,25 +304,25 @@
+ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 	7,	/* Advanced Interrupt Controller */
+ 	7,	/* System Peripherals */
+-	0,	/* Parallel IO Controller A */
+-	0,	/* Parallel IO Controller B */
+-	0,	/* Parallel IO Controller C */
++	1,	/* Parallel IO Controller A */
++	1,	/* Parallel IO Controller B */
++	1,	/* Parallel IO Controller C */
+ 	0,
+-	6,	/* USART 0 */
+-	6,	/* USART 1 */
+-	6,	/* USART 2 */
++	5,	/* USART 0 */
++	5,	/* USART 1 */
++	5,	/* USART 2 */
+ 	0,	/* Multimedia Card Interface */
+-	4,	/* USB Device Port */
+-	0,	/* Two-Wire Interface */
+-	6,	/* Serial Peripheral Interface 0 */
+-	6,	/* Serial Peripheral Interface 1 */
+-	5,	/* Serial Synchronous Controller 0 */
+-	5,	/* Serial Synchronous Controller 1 */
+-	5,	/* Serial Synchronous Controller 2 */
++	2,	/* USB Device Port */
++	6,	/* Two-Wire Interface */
++	5,	/* Serial Peripheral Interface 0 */
++	5,	/* Serial Peripheral Interface 1 */
++	4,	/* Serial Synchronous Controller 0 */
++	4,	/* Serial Synchronous Controller 1 */
++	4,	/* Serial Synchronous Controller 2 */
+ 	0,	/* Timer Counter 0 */
+ 	0,	/* Timer Counter 1 */
+ 	0,	/* Timer Counter 2 */
+-	3,	/* USB Host port */
++	2,	/* USB Host port */
+ 	3,	/* LCD Controller */
+ 	0,
+ 	0,
+Index: linux-2.6.22.1/arch/arm/mach-at91/at91sam9260_devices.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/at91sam9260_devices.c	(revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/at91sam9260_devices.c	(arbetskopia)
+@@ -524,6 +524,32 @@
+ #endif
+ 
+ 
++#if defined(CONFIG_NEW_LEDS)
++
++static struct platform_device at91_leds = {
++	.name		= "at91_leds",
++	.id		= -1,
++};
++
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
++{
++	if (!nr)
++		return;
++
++	at91_leds.dev.platform_data = leds;
++
++	for ( ; nr; nr--, leds++) {
++		leds->index = nr;	/* first record stores number of leds */
++		at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
++	}
++
++	platform_device_register(&at91_leds);
++}
++#else
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
++#endif
++
++
+ /* --------------------------------------------------------------------
+  *  UART
+  * -------------------------------------------------------------------- */
+Index: linux-2.6.22.1/arch/arm/mach-at91/at91sam9261_devices.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/at91sam9261_devices.c	(revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/at91sam9261_devices.c	(arbetskopia)
+@@ -14,7 +14,10 @@
+ #include <asm/mach/map.h>
+ 
+ #include <linux/platform_device.h>
++#include <linux/fb.h>
+ 
++#include <video/atmel_lcdc.h>
++
+ #include <asm/arch/board.h>
+ #include <asm/arch/gpio.h>
+ #include <asm/arch/at91sam9261.h>
+@@ -522,6 +525,32 @@
+ #endif
+ 
+ 
++#if defined(CONFIG_NEW_LEDS)
++
++static struct platform_device at91_leds = {
++	.name		= "at91_leds",
++	.id		= -1,
++};
++
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
++{
++	if (!nr)
++		return;
++
++	at91_leds.dev.platform_data = leds;
++
++	for ( ; nr; nr--, leds++) {
++		leds->index = nr;	/* first record stores number of leds */
++		at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
++	}
++
++	platform_device_register(&at91_leds);
++}
++#else
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
++#endif
++
++
+ /* --------------------------------------------------------------------
+  *  UART
+  * -------------------------------------------------------------------- */
+Index: linux-2.6.22.1/arch/arm/mach-at91/at91sam9263.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/at91sam9263.c	(revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/at91sam9263.c	(arbetskopia)
+@@ -273,6 +273,28 @@
+ 
+ 
+ /* --------------------------------------------------------------------
++ *  Timer/Counter library initialization
++ * -------------------------------------------------------------------- */
++#ifdef CONFIG_ATMEL_TCLIB
++
++#include "tclib.h"
++
++static struct atmel_tcblock at91sam9263_tcblocks[] = {
++	[0] = {
++		.physaddr	= AT91SAM9263_BASE_TCB0,
++		.irq		= { AT91SAM9263_ID_TCB, AT91SAM9263_ID_TCB, AT91SAM9263_ID_TCB },
++		.clk		= { &tcb_clk, &tcb_clk, &tcb_clk },
++	}
++};
++
++#define at91sam9263_tc_init()	atmel_tc_init(at91sam9263_tcblocks, ARRAY_SIZE(at91sam9263_tcblocks))
++
++#else
++#define at91sam9263_tc_init()	do {} while(0)
++#endif
++
++
++/* --------------------------------------------------------------------
+  *  AT91SAM9263 processor initialization
+  * -------------------------------------------------------------------- */
+ 
+@@ -292,6 +314,9 @@
+ 
+ 	/* Register GPIO subsystem */
+ 	at91_gpio_init(at91sam9263_gpio, 5);
++
++	/* Initialize the Timer/Counter blocks */
++	at91sam9263_tc_init();
+ }
+ 
+ /* --------------------------------------------------------------------
+@@ -304,34 +329,34 @@
+ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 	7,	/* Advanced Interrupt Controller (FIQ) */
+ 	7,	/* System Peripherals */
+-	0,	/* Parallel IO Controller A */
+-	0,	/* Parallel IO Controller B */
+-	0,	/* Parallel IO Controller C, D and E */
++	1,	/* Parallel IO Controller A */
++	1,	/* Parallel IO Controller B */
++	1,	/* Parallel IO Controller C, D and E */
+ 	0,
+ 	0,
+-	6,	/* USART 0 */
+-	6,	/* USART 1 */
+-	6,	/* USART 2 */
++	5,	/* USART 0 */
++	5,	/* USART 1 */
++	5,	/* USART 2 */
+ 	0,	/* Multimedia Card Interface 0 */
+ 	0,	/* Multimedia Card Interface 1 */
+-	4,	/* CAN */
+-	0,	/* Two-Wire Interface */
+-	6,	/* Serial Peripheral Interface 0 */
+-	6,	/* Serial Peripheral Interface 1 */
+-	5,	/* Serial Synchronous Controller 0 */
+-	5,	/* Serial Synchronous Controller 1 */
+-	6,	/* AC97 Controller */
++	3,	/* CAN */
++	6,	/* Two-Wire Interface */
++	5,	/* Serial Peripheral Interface 0 */
++	5,	/* Serial Peripheral Interface 1 */
++	4,	/* Serial Synchronous Controller 0 */
++	4,	/* Serial Synchronous Controller 1 */
++	5,	/* AC97 Controller */
+ 	0,	/* Timer Counter 0, 1 and 2 */
+ 	0,	/* Pulse Width Modulation Controller */
+ 	3,	/* Ethernet */
+ 	0,
+ 	0,	/* 2D Graphic Engine */
+-	3,	/* USB Device Port */
++	2,	/* USB Device Port */
+ 	0,	/* Image Sensor Interface */
+ 	3,	/* LDC Controller */
+ 	0,	/* DMA Controller */
+ 	0,
+-	3,	/* USB Host port */
++	2,	/* USB Host port */
+ 	0,	/* Advanced Interrupt Controller (IRQ0) */
+ 	0,	/* Advanced Interrupt Controller (IRQ1) */
+ };
+Index: linux-2.6.22.1/arch/arm/mach-at91/at91sam9263_devices.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/at91sam9263_devices.c	(revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/at91sam9263_devices.c	(arbetskopia)
+@@ -13,7 +13,10 @@
+ #include <asm/mach/map.h>
+ 
+ #include <linux/platform_device.h>
++#include <linux/fb.h>
+ 
++#include <video/atmel_lcdc.h>
++
+ #include <asm/arch/board.h>
+ #include <asm/arch/gpio.h>
+ #include <asm/arch/at91sam9263.h>
+@@ -625,6 +628,56 @@
+ 
+ 
+ /* --------------------------------------------------------------------
++ *  Image Sensor Interface
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE)
++
++struct resource isi_resources[] = {
++	[0] = {
++		.start	= AT91SAM9263_BASE_ISI,
++		.end	= AT91SAM9263_BASE_ISI + SZ_16K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= AT91SAM9263_ID_ISI,
++		.end	= AT91SAM9263_ID_ISI,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device at91sam9263_isi_device = {
++	.name		= "at91_isi",
++	.id		= -1,
++	.resource	= isi_resources,
++	.num_resources	= ARRAY_SIZE(isi_resources),
++};
++
++void __init at91_add_device_isi(void)
++{
++	at91_set_A_periph(AT91_PIN_PE0, 0);	/* ISI_D0 */
++	at91_set_A_periph(AT91_PIN_PE1, 0);	/* ISI_D1 */
++	at91_set_A_periph(AT91_PIN_PE2, 0);	/* ISI_D2 */
++	at91_set_A_periph(AT91_PIN_PE3, 0);	/* ISI_D3 */
++	at91_set_A_periph(AT91_PIN_PE4, 0);	/* ISI_D4 */
++	at91_set_A_periph(AT91_PIN_PE5, 0);	/* ISI_D5 */
++	at91_set_A_periph(AT91_PIN_PE6, 0);	/* ISI_D6 */
++	at91_set_A_periph(AT91_PIN_PE7, 0);	/* ISI_D7 */
++	at91_set_A_periph(AT91_PIN_PE8, 0);	/* ISI_PCK */
++	at91_set_A_periph(AT91_PIN_PE9, 0);	/* ISI_HSYNC */
++	at91_set_A_periph(AT91_PIN_PE10, 0);	/* ISI_VSYNC */
++	at91_set_B_periph(AT91_PIN_PE11, 0);	/* ISI_MCK (PCK3) */
++	at91_set_B_periph(AT91_PIN_PE12, 0);	/* ISI_PD8 */
++	at91_set_B_periph(AT91_PIN_PE13, 0);	/* ISI_PD9 */
++	at91_set_B_periph(AT91_PIN_PE14, 0);	/* ISI_PD10 */
++	at91_set_B_periph(AT91_PIN_PE15, 0);	/* ISI_PD11 */
++}
++#else
++void __init at91_add_device_isi(void) {}
++#endif
++
++
++/* --------------------------------------------------------------------
+  *  LCD Controller
+  * -------------------------------------------------------------------- */
+ 
+@@ -715,6 +768,32 @@
+ #endif
+ 
+ 
++#if defined(CONFIG_NEW_LEDS)
++
++static struct platform_device at91_leds = {
++	.name		= "at91_leds",
++	.id		= -1,
++};
++
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
++{
++	if (!nr)
++		return;
++
++	at91_leds.dev.platform_data = leds;
++
++	for ( ; nr; nr--, leds++) {
++		leds->index = nr;	/* first record stores number of leds */
++		at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
++	}
++
++	platform_device_register(&at91_leds);
++}
++#else
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
++#endif
++
++
+ /* --------------------------------------------------------------------
+  *  UART
+  * -------------------------------------------------------------------- */
+Index: linux-2.6.22.1/arch/arm/mach-at91/board-chub.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/board-chub.c	(revision 0)
++++ linux-2.6.22.1/arch/arm/mach-at91/board-chub.c	(revision 0)
+@@ -0,0 +1,132 @@
++/*
++ * linux/arch/arm/mach-at91/board-chub.c
++ *
++ *  Copyright (C) 2005 SAN People, adapted for Promwad Chub board
++ *  by Kuten Ivan
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <asm/hardware.h>
++#include <asm/setup.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++
++#include "generic.h"
++
++/*
++ * Serial port configuration.
++ *    0 .. 3 = USART0 .. USART3
++ *    4      = DBGU
++ */
++static struct at91_uart_config __initdata chub_uart_config = {
++	.console_tty	= 0,				/* ttyS0 */
++	.nr_tty		= 5,
++	.tty_map	= { 4, 0, 1, 2, 3 }		/* ttyS0, ..., ttyS4 */
++};
++
++static void __init chub_init_irq(void)
++{
++	at91rm9200_init_interrupts(NULL);
++}
++
++static void __init chub_map_io(void)
++{
++	/* Initialize clocks: 18.432 MHz crystal */
++	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
++
++	/* Setup the serial ports and console */
++	at91_init_serial(&chub_uart_config);
++}
++
++static struct at91_eth_data __initdata chub_eth_data = {
++	.phy_irq_pin	= AT91_PIN_PB29,
++	.is_rmii	= 0,
++};
++
++static struct mtd_partition __initdata chub_nand_partition[] = {
++	{
++		.name	= "NAND Partition 1",
++		.offset = 0,
++		.size	= MTDPART_SIZ_FULL,
++	},
++};
++
++static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
++{
++	*num_partitions = ARRAY_SIZE(chub_nand_partition);
++	return chub_nand_partition;
++}
++
++static struct at91_nand_data __initdata chub_nand_data = {
++	.ale		= 22,
++	.cle		= 21,
++	.enable_pin	= AT91_PIN_PA27,
++	.partition_info	= nand_partitions,
++};
++
++static struct spi_board_info chub_spi_devices[] = {
++	{	/* DataFlash chip */
++		.modalias	= "mtd_dataflash",
++		.chip_select	= 0,
++		.max_speed_hz	= 15 * 1000 * 1000,
++	},
++};
++
++static void __init chub_board_init(void)
++{
++	/* Serial */
++	at91_add_device_serial();
++	/* I2C */
++	at91_add_device_i2c();
++	/* Ethernet */
++	at91_add_device_eth(&chub_eth_data);
++	/* SPI */
++	at91_add_device_spi(chub_spi_devices, ARRAY_SIZE(chub_spi_devices));
++	/* NAND Flash */
++	at91_add_device_nand(&chub_nand_data);
++	/* Disable write protect for NAND */
++	at91_set_gpio_output(AT91_PIN_PB7, 1);
++	/* Power enable for 3x RS-232 and 1x RS-485 */
++	at91_set_gpio_output(AT91_PIN_PB9, 1);
++	/* Disable write protect for FRAM */
++	at91_set_gpio_output(AT91_PIN_PA21, 1);
++	/* Disable write protect for Dataflash */
++	at91_set_gpio_output(AT91_PIN_PA19, 1);
++}
++
++MACHINE_START(CHUB, "Promwad Chub")
++	/* Maintainer: Ivan Kuten AT Promwad DOT com */
++	.phys_io	= AT91_BASE_SYS,
++	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
++	.boot_params	= AT91_SDRAM_BASE + 0x100,
++	.timer		= &at91rm9200_timer,
++	.map_io		= chub_map_io,
++	.init_irq	= chub_init_irq,
++	.init_machine	= chub_board_init,
++MACHINE_END
+Index: linux-2.6.22.1/arch/arm/mach-at91/board-sam9261ek.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/board-sam9261ek.c	(revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/board-sam9261ek.c	(arbetskopia)
+@@ -27,7 +27,10 @@
+ #include <linux/spi/spi.h>
+ #include <linux/spi/ads7846.h>
+ #include <linux/dm9000.h>
++#include <linux/fb.h>
+ 
++#include <video/atmel_lcdc.h>
++
+ #include <asm/hardware.h>
+ #include <asm/setup.h>
+ #include <asm/mach-types.h>
+@@ -251,6 +254,7 @@
+ 		.bus_num	= 0,
+ 		.platform_data	= &ads_info,
+ 		.irq		= AT91SAM9261_ID_IRQ0,
++		.controller_data = AT91_PIN_PA28,	/* CS pin */
+ 	},
+ #endif
+ #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+@@ -271,6 +275,65 @@
+ };
+ 
+ 
++/*
++ * LCD Controller
++ */
++#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
++static struct fb_videomode at91_tft_vga_modes[] = {
++	{
++	        .name           = "TX09D50VM1CCA @ 60",
++		.refresh	= 60,
++		.xres		= 240,		.yres		= 320,
++		.pixclock	= KHZ2PICOS(4965),
++
++		.left_margin	= 1,		.right_margin	= 33,
++		.upper_margin	= 1,		.lower_margin	= 0,
++		.hsync_len	= 5,		.vsync_len	= 1,
++
++		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++		.vmode		= FB_VMODE_NONINTERLACED,
++	},
++};
++
++static struct fb_monspecs at91fb_default_monspecs = {
++	.manufacturer	= "HIT",
++	.monitor        = "TX09D50VM1CCA",
++
++	.modedb		= at91_tft_vga_modes,
++	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
++	.hfmin		= 15000,
++	.hfmax		= 64000,
++	.vfmin		= 50,
++	.vfmax		= 150,
++};
++
++#define AT91SAM9261_DEFAULT_LCDCON2 	(ATMEL_LCDC_MEMOR_LITTLE \
++					| ATMEL_LCDC_DISTYPE_TFT    \
++					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
++
++static void at91_lcdc_power_control(int on)
++{
++	if (on)
++		at91_set_gpio_value(AT91_PIN_PA12, 0);	/* power up */
++	else
++		at91_set_gpio_value(AT91_PIN_PA12, 1);	/* power down */
++}
++
++/* Driver datas */
++static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
++	.default_bpp			= 16,
++	.default_dmacon			= ATMEL_LCDC_DMAEN,
++	.default_lcdcon2		= AT91SAM9261_DEFAULT_LCDCON2,
++	.default_monspecs		= &at91fb_default_monspecs,
++	.atmel_lcdfb_power_control	= at91_lcdc_power_control,
++	.guard_time			= 1,
++};
++
++#else
++static struct atmel_lcdfb_info __initdata ek_lcdc_data;
++#endif
++
++
+ static void __init ek_board_init(void)
+ {
+ 	/* Serial */
+@@ -296,6 +359,8 @@
+ 	/* MMC */
+ 	at91_add_device_mmc(0, &ek_mmc_data);
+ #endif
++	/* LCD Controller */
++	at91_add_device_lcdc(&ek_lcdc_data);
+ }
+ 
+ MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
+Index: linux-2.6.22.1/arch/arm/mach-at91/board-sam9263ek.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/board-sam9263ek.c	(revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/board-sam9263ek.c	(arbetskopia)
+@@ -26,7 +26,10 @@
+ #include <linux/platform_device.h>
+ #include <linux/spi/spi.h>
+ #include <linux/spi/ads7846.h>
++#include <linux/fb.h>
+ 
++#include <video/atmel_lcdc.h>
++
+ #include <asm/hardware.h>
+ #include <asm/setup.h>
+ #include <asm/mach-types.h>
+@@ -202,6 +205,65 @@
+ 
+ 
+ /*
++ * LCD Controller
++ */
++#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
++static struct fb_videomode at91_tft_vga_modes[] = {
++	{
++	        .name           = "TX09D50VM1CCA @ 60",
++		.refresh	= 60,
++		.xres		= 240,		.yres		= 320,
++		.pixclock	= KHZ2PICOS(4965),
++
++		.left_margin	= 1,		.right_margin	= 33,
++		.upper_margin	= 1,		.lower_margin	= 0,
++		.hsync_len	= 5,		.vsync_len	= 1,
++
++		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++		.vmode		= FB_VMODE_NONINTERLACED,
++	},
++};
++
++static struct fb_monspecs at91fb_default_monspecs = {
++	.manufacturer	= "HIT",
++	.monitor        = "TX09D70VM1CCA",
++
++	.modedb		= at91_tft_vga_modes,
++	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
++	.hfmin		= 15000,
++	.hfmax		= 64000,
++	.vfmin		= 50,
++	.vfmax		= 150,
++};
++
++#define AT91SAM9263_DEFAULT_LCDCON2 	(ATMEL_LCDC_MEMOR_LITTLE \
++					| ATMEL_LCDC_DISTYPE_TFT    \
++					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
++
++static void at91_lcdc_power_control(int on)
++{
++	if (on)
++		at91_set_gpio_value(AT91_PIN_PD12, 0);	/* power up */
++	else
++		at91_set_gpio_value(AT91_PIN_PD12, 1);	/* power down */
++}
++
++/* Driver datas */
++static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
++	.default_bpp			= 16,
++	.default_dmacon			= ATMEL_LCDC_DMAEN,
++	.default_lcdcon2		= AT91SAM9263_DEFAULT_LCDCON2,
++	.default_monspecs		= &at91fb_default_monspecs,
++	.atmel_lcdfb_power_control	= at91_lcdc_power_control,
++	.guard_time			= 1,
++};
++
++#else
++static struct atmel_lcdfb_info __initdata ek_lcdc_data;
++#endif
++
++
++/*
+  * AC97
+  */
+ static struct atmel_ac97_data ek_ac97_data = {
+@@ -230,6 +292,8 @@
+ 	at91_add_device_nand(&ek_nand_data);
+ 	/* I2C */
+ 	at91_add_device_i2c();
++	/* LCD Controller */
++	at91_add_device_lcdc(&ek_lcdc_data);
+ 	/* AC97 */
+ 	at91_add_device_ac97(&ek_ac97_data);
+ }
+Index: linux-2.6.22.1/arch/arm/mach-at91/generic.h
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/generic.h	(revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/generic.h	(arbetskopia)
+@@ -36,6 +36,7 @@
+  /* Power Management */
+ extern void at91_irq_suspend(void);
+ extern void at91_irq_resume(void);
++extern int at91_suspend_entering_slow_clock(void);
+ 
+  /* GPIO */
+ #define AT91RM9200_PQFP		3	/* AT91RM9200 PQFP package has 3 banks */
+Index: linux-2.6.22.1/arch/arm/mach-at91/board-ek.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/board-ek.c	(revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/board-ek.c	(arbetskopia)
+@@ -73,6 +73,187 @@
+ 	at91rm9200_init_interrupts(NULL);
+ }
+ 
++#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
++#include <video/s1d13xxxfb.h>
++#include <asm/arch/ics1523.h>
++
++/* EPSON S1D13806 FB */
++#define AT91_FB_REG_BASE	0x40000000L
++#define	AT91_FB_REG_SIZE	0x200
++#define AT91_FB_VMEM_BASE	0x40200000L
++#define AT91_FB_VMEM_SIZE	0x140000L
++
++static void __init ek_init_video(void)
++{
++	/* NWAIT Signal */
++	at91_set_A_periph(AT91_PIN_PC6, 0);
++
++	/* Initialization of the Static Memory Controller for Chip Select 3 */
++	at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_DBW_16			/* 16 bit */
++				| AT91_SMC_WSEN | AT91_SMC_NWS_(5)	/* wait states */
++				| AT91_SMC_TDF_(1)			/* float time */
++	);
++
++	at91_ics1523_init();
++}
++
++/* CRT:    (active)   640x480 60Hz (PCLK=CLKI=25.175MHz)
++   Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
++static const struct s1d13xxxfb_regval ek_s1dfb_initregs[] = {
++	{S1DREG_MISC,			0x00},	/* Enable Memory/Register select bit */
++	{S1DREG_COM_DISP_MODE,		0x00},	/* disable display output */
++	{S1DREG_GPIO_CNF0,		0xFF},	// 0x00
++	{S1DREG_GPIO_CNF1,		0x1F},	// 0x08
++	{S1DREG_GPIO_CTL0,		0x00},
++	{S1DREG_GPIO_CTL1,		0x00},
++	{S1DREG_CLK_CNF,		0x01},	/* no divide, MCLK source is CLKI3 0x02*/
++	{S1DREG_LCD_CLK_CNF,		0x00},
++	{S1DREG_CRT_CLK_CNF,		0x00},
++	{S1DREG_MPLUG_CLK_CNF,		0x00},
++	{S1DREG_CPU2MEM_WST_SEL,	0x01},	/* 2*period(MCLK) - 4ns > period(BCLK) */
++	{S1DREG_SDRAM_REF_RATE,		0x03},	/* 32768 <= MCLK <= 50000 (MHz) */
++	{S1DREG_SDRAM_TC0,		0x00},	/* MCLK source freq (MHz): */
++	{S1DREG_SDRAM_TC1,		0x01},	/* 42 <= MCLK <= 50 */
++	{S1DREG_MEM_CNF,		0x80},	/* SDRAM Initialization - needed before mem access */
++	{S1DREG_PANEL_TYPE,		0x25},	/* std TFT 16bit, 8bit SCP format 2, single passive LCD */
++	{S1DREG_MOD_RATE,		0x00},	/* toggle every FPFRAME */
++	{S1DREG_LCD_DISP_HWIDTH,	0x4F},	/* 680 pix */
++	{S1DREG_LCD_NDISP_HPER,		0x12},	/* 152 pix */
++	{S1DREG_TFT_FPLINE_START,	0x01},	/* 13 pix */
++	{S1DREG_TFT_FPLINE_PWIDTH,	0x0B},	/* 96 pix */
++	{S1DREG_LCD_DISP_VHEIGHT0,	0xDF},
++	{S1DREG_LCD_DISP_VHEIGHT1,	0x01},	/* 480 lines */
++	{S1DREG_LCD_NDISP_VPER,		0x2C},	/* 44 lines */
++	{S1DREG_TFT_FPFRAME_START,	0x0A},	/* 10 lines */
++	{S1DREG_TFT_FPFRAME_PWIDTH,	0x01},	/* 2 lines */
++	{S1DREG_LCD_DISP_MODE,		0x05},  /* 16 bpp */
++	{S1DREG_LCD_MISC,		0x00},	/* dithering enabled, dual panel buffer enabled */
++	{S1DREG_LCD_DISP_START0,	0x00},
++	{S1DREG_LCD_DISP_START1,	0xC8},
++	{S1DREG_LCD_DISP_START2,	0x00},
++	{S1DREG_LCD_MEM_OFF0,		0x80},
++	{S1DREG_LCD_MEM_OFF1,		0x02},
++	{S1DREG_LCD_PIX_PAN,		0x00},
++	{S1DREG_LCD_DISP_FIFO_HTC,	0x3B},
++	{S1DREG_LCD_DISP_FIFO_LTC,	0x3C},
++	{S1DREG_CRT_DISP_HWIDTH,	0x4F},	/* 680 pix */
++	{S1DREG_CRT_NDISP_HPER,		0x13},	/* 160 pix */
++	{S1DREG_CRT_HRTC_START,		0x01},	/* 13 pix */
++	{S1DREG_CRT_HRTC_PWIDTH,	0x0B},	/* 96 pix */
++	{S1DREG_CRT_DISP_VHEIGHT0,	0xDF},
++	{S1DREG_CRT_DISP_VHEIGHT1,	0x01},	/* 480 lines */
++	{S1DREG_CRT_NDISP_VPER,		0x2B},	/* 44 lines */
++	{S1DREG_CRT_VRTC_START,		0x09},	/* 10 lines */
++	{S1DREG_CRT_VRTC_PWIDTH,	0x01},	/* 2 lines */
++	{S1DREG_TV_OUT_CTL,		0x10},
++	{0x005E,			0x9F},
++	{0x005F,			0x00},
++	{S1DREG_CRT_DISP_MODE,		0x05},	/* 16 bpp */
++	{S1DREG_CRT_DISP_START0,	0x00},
++	{S1DREG_CRT_DISP_START1,	0x00},
++	{S1DREG_CRT_DISP_START2,	0x00},
++	{S1DREG_CRT_MEM_OFF0,		0x80},
++	{S1DREG_CRT_MEM_OFF1,		0x02},
++	{S1DREG_CRT_PIX_PAN,		0x00},
++	{S1DREG_CRT_DISP_FIFO_HTC,	0x3B},
++	{S1DREG_CRT_DISP_FIFO_LTC,	0x3C},
++	{S1DREG_LCD_CUR_CTL,		0x00},	/* inactive */
++	{S1DREG_LCD_CUR_START,		0x01},
++	{S1DREG_LCD_CUR_XPOS0,		0x00},
++	{S1DREG_LCD_CUR_XPOS1,		0x00},
++	{S1DREG_LCD_CUR_YPOS0,		0x00},
++	{S1DREG_LCD_CUR_YPOS1,		0x00},
++	{S1DREG_LCD_CUR_BCTL0,		0x00},
++	{S1DREG_LCD_CUR_GCTL0,		0x00},
++	{S1DREG_LCD_CUR_RCTL0,		0x00},
++	{S1DREG_LCD_CUR_BCTL1,		0x1F},
++	{S1DREG_LCD_CUR_GCTL1,		0x3F},
++	{S1DREG_LCD_CUR_RCTL1,		0x1F},
++	{S1DREG_LCD_CUR_FIFO_HTC,	0x00},
++	{S1DREG_CRT_CUR_CTL,		0x00},	/* inactive */
++	{S1DREG_CRT_CUR_START,		0x01},
++	{S1DREG_CRT_CUR_XPOS0,		0x00},
++	{S1DREG_CRT_CUR_XPOS1,		0x00},
++	{S1DREG_CRT_CUR_YPOS0,		0x00},
++	{S1DREG_CRT_CUR_YPOS1,		0x00},
++	{S1DREG_CRT_CUR_BCTL0,		0x00},
++	{S1DREG_CRT_CUR_GCTL0,		0x00},
++	{S1DREG_CRT_CUR_RCTL0,		0x00},
++	{S1DREG_CRT_CUR_BCTL1,		0x1F},
++	{S1DREG_CRT_CUR_GCTL1,		0x3F},
++	{S1DREG_CRT_CUR_RCTL1,		0x1F},
++	{S1DREG_CRT_CUR_FIFO_HTC,	0x00},
++	{S1DREG_BBLT_CTL0,		0x00},
++	{S1DREG_BBLT_CTL0,		0x00},
++	{S1DREG_BBLT_CC_EXP,		0x00},
++	{S1DREG_BBLT_OP,		0x00},
++	{S1DREG_BBLT_SRC_START0,	0x00},
++	{S1DREG_BBLT_SRC_START1,	0x00},
++	{S1DREG_BBLT_SRC_START2,	0x00},
++	{S1DREG_BBLT_DST_START0,	0x00},
++	{S1DREG_BBLT_DST_START1,	0x00},
++	{S1DREG_BBLT_DST_START2,	0x00},
++	{S1DREG_BBLT_MEM_OFF0,		0x00},
++	{S1DREG_BBLT_MEM_OFF1,		0x00},
++	{S1DREG_BBLT_WIDTH0,		0x00},
++	{S1DREG_BBLT_WIDTH1,		0x00},
++	{S1DREG_BBLT_HEIGHT0,		0x00},
++	{S1DREG_BBLT_HEIGHT1,		0x00},
++	{S1DREG_BBLT_BGC0,		0x00},
++	{S1DREG_BBLT_BGC1,		0x00},
++	{S1DREG_BBLT_FGC0,		0x00},
++	{S1DREG_BBLT_FGC1,		0x00},
++	{S1DREG_LKUP_MODE,		0x00},	/* LCD LUT r | LCD and CRT/TV LUT w */
++	{S1DREG_LKUP_ADDR,		0x00},
++	{S1DREG_PS_CNF,			0x10},	/* Power Save disable */
++	{S1DREG_PS_STATUS,		0x02},	/* LCD Panel down, mem up */
++	{S1DREG_CPU2MEM_WDOGT,		0x00},
++	{S1DREG_COM_DISP_MODE,		0x02},	/* enable CRT display output */
++};
++
++static struct s1d13xxxfb_pdata ek_s1dfb_pdata = {
++	.initregs		= ek_s1dfb_initregs,
++	.initregssize		= ARRAY_SIZE(ek_s1dfb_initregs),
++	.platform_init_video	= ek_init_video,
++};
++
++static u64 s1dfb_dmamask = 0xffffffffUL;
++
++static struct resource ek_s1dfb_resource[] = {
++	[0] = {	/* video mem */
++		.name   = "s1d13806 memory",
++		.start  = AT91_FB_VMEM_BASE,
++		.end    = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
++		.flags  = IORESOURCE_MEM,
++	},
++	[1] = {	/* video registers */
++		.name   = "s1d13806 registers",
++		.start  = AT91_FB_REG_BASE,
++		.end    = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
++		.flags  = IORESOURCE_MEM,
++	},
++};
++
++static struct platform_device ek_s1dfb_device = {
++	.name		= "s1d13806fb",
++	.id		= -1,
++	.dev		= {
++			.dma_mask		= &s1dfb_dmamask,
++			.coherent_dma_mask	= 0xffffffff,
++			.platform_data		= &ek_s1dfb_pdata,
++	},
++	.resource	= ek_s1dfb_resource,
++	.num_resources	= ARRAY_SIZE(ek_s1dfb_resource),
++};
++
++static void __init ek_add_device_video(void)
++{
++	platform_device_register(&ek_s1dfb_device);
++}
++#else
++static void __init ek_add_device_video(void) {}
++#endif
++
+ static struct at91_eth_data __initdata ek_eth_data = {
+ 	.phy_irq_pin	= AT91_PIN_PC4,
+ 	.is_rmii	= 1,
+@@ -113,7 +294,7 @@
+ #define EK_FLASH_SIZE	0x200000
+ 
+ static struct physmap_flash_data ek_flash_data = {
+-	.width	= 2,
++	.width		= 2,
+ };
+ 
+ static struct resource ek_flash_resource = {
+@@ -132,6 +313,18 @@
+ 	.num_resources	= 1,
+ };
+ 
++static struct at91_gpio_led ek_leds[] = {
++	{
++		.name		= "led0",
++		.gpio		= AT91_PIN_PB1,
++		.trigger	= "heartbeat",
++	},
++	{
++		.name		= "led1",
++		.gpio		= AT91_PIN_PB2,
++		.trigger	= "timer",
++	}
++};
+ 
+ static void __init ek_board_init(void)
+ {
+@@ -158,8 +351,10 @@
+ #endif
+ 	/* NOR Flash */
+ 	platform_device_register(&ek_flash);
++	/* LEDs */
++	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ 	/* VGA */
+-//	ek_add_device_video();
++	ek_add_device_video();
+ }
+ 
+ MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
+Index: linux-2.6.22.1/arch/arm/mach-at91/at91rm9200.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/at91rm9200.c	(revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/at91rm9200.c	(arbetskopia)
+@@ -267,6 +267,33 @@
+ 
+ 
+ /* --------------------------------------------------------------------
++ *  Timer/Counter library initialization
++ * -------------------------------------------------------------------- */
++#ifdef CONFIG_ATMEL_TCLIB
++
++#include "tclib.h"
++
++static struct atmel_tcblock at91rm9200_tcblocks[] = {
++	[0] = {
++		.physaddr	= AT91RM9200_BASE_TCB0,
++		.irq		= { AT91RM9200_ID_TC0, AT91RM9200_ID_TC1, AT91RM9200_ID_TC2 },
++		.clk		= { &tc0_clk, &tc1_clk, &tc2_clk },
++	},
++	[1] = {
++		.physaddr	= AT91RM9200_BASE_TCB1,
++		.irq		= { AT91RM9200_ID_TC3, AT91RM9200_ID_TC4, AT91RM9200_ID_TC5 },
++		.clk		= { &tc3_clk, &tc4_clk, &tc5_clk },
++	},
++};
++
++#define at91rm9200_tc_init()	atmel_tc_init(at91rm9200_tcblocks, ARRAY_SIZE(at91rm9200_tcblocks))
++
++#else
++#define at91rm9200_tc_init()	do {} while(0)
++#endif
++
++
++/* --------------------------------------------------------------------
+  *  AT91RM9200 processor initialization
+  * -------------------------------------------------------------------- */
+ void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks)
+@@ -288,6 +315,9 @@
+ 
+ 	/* Initialize GPIO subsystem */
+ 	at91_gpio_init(at91rm9200_gpio, banks);
++
++	/* Initialize the Timer/Counter blocks */
++	at91rm9200_tc_init();
+ }
+ 
+ 
+@@ -301,28 +331,28 @@
+ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 	7,	/* Advanced Interrupt Controller (FIQ) */
+ 	7,	/* System Peripherals */
+-	0,	/* Parallel IO Controller A */
+-	0,	/* Parallel IO Controller B */
+-	0,	/* Parallel IO Controller C */
+-	0,	/* Parallel IO Controller D */
+-	6,	/* USART 0 */
+-	6,	/* USART 1 */
+-	6,	/* USART 2 */
+-	6,	/* USART 3 */
++	1,	/* Parallel IO Controller A */
++	1,	/* Parallel IO Controller B */
++	1,	/* Parallel IO Controller C */
++	1,	/* Parallel IO Controller D */
++	5,	/* USART 0 */
++	5,	/* USART 1 */
++	5,	/* USART 2 */
++	5,	/* USART 3 */
+ 	0,	/* Multimedia Card Interface */
+-	4,	/* USB Device Port */
+-	0,	/* Two-Wire Interface */
+-	6,	/* Serial Peripheral Interface */
+-	5,	/* Serial Synchronous Controller 0 */
+-	5,	/* Serial Synchronous Controller 1 */
+-	5,	/* Serial Synchronous Controller 2 */
++	2,	/* USB Device Port */
++	6,	/* Two-Wire Interface */
++	5,	/* Serial Peripheral Interface */
++	4,	/* Serial Synchronous Controller 0 */
++	4,	/* Serial Synchronous Controller 1 */
++	4,	/* Serial Synchronous Controller 2 */
+ 	0,	/* Timer Counter 0 */
+ 	0,	/* Timer Counter 1 */
+ 	0,	/* Timer Counter 2 */
+ 	0,	/* Timer Counter 3 */
+ 	0,	/* Timer Counter 4 */
+ 	0,	/* Timer Counter 5 */
+-	3,	/* USB Host port */
++	2,	/* USB Host port */
+ 	3,	/* Ethernet MAC */
+ 	0,	/* Advanced Interrupt Controller (IRQ0) */
+ 	0,	/* Advanced Interrupt Controller (IRQ1) */
+Index: linux-2.6.22.1/arch/arm/mach-at91/ics1523.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/ics1523.c	(revision 0)
++++ linux-2.6.22.1/arch/arm/mach-at91/ics1523.c	(revision 0)
+@@ -0,0 +1,207 @@
++/*
++ * arch/arm/mach-at91rm9200/ics1523.c
++ *
++ *  Copyright (C) 2003 ATMEL Rousset
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <asm/hardware.h>
++#include <asm/io.h>
++
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/err.h>
++#include <linux/init.h>
++
++#include <asm/arch/ics1523.h>
++#include <asm/arch/at91_twi.h>
++#include <asm/arch/gpio.h>
++
++/* TWI Errors */
++#define	AT91_TWI_ERROR	(AT91_TWI_NACK | AT91_TWI_UNRE | AT91_TWI_OVRE)
++
++
++static void __iomem *twi_base;
++
++#define at91_twi_read(reg)		__raw_readl(twi_base + (reg))
++#define at91_twi_write(reg, val)	__raw_writel((val), twi_base + (reg))
++
++
++/* -----------------------------------------------------------------------------
++ * Initialization of TWI CLOCK
++ * ----------------------------------------------------------------------------- */
++
++static void at91_ics1523_SetTwiClock(unsigned int mck_khz)
++{
++	int sclock;
++
++	/* Here, CKDIV = 1 and CHDIV = CLDIV  ==> CLDIV = CHDIV = 1/4*((Fmclk/FTWI) -6) */
++	sclock = (10*mck_khz / ICS_TRANSFER_RATE);
++	if (sclock % 10 >= 5)
++		sclock = (sclock /10) - 5;
++	else
++		sclock = (sclock /10)- 6;
++	sclock = (sclock + (4 - sclock %4)) >> 2;	/* div 4 */
++
++	at91_twi_write(AT91_TWI_CWGR, 0x00010000 | sclock | (sclock << 8));
++}
++
++/* -----------------------------------------------------------------------------
++ * Read a byte with TWI Interface from the Clock Generator ICS1523
++ * ----------------------------------------------------------------------------- */
++
++static int at91_ics1523_ReadByte(unsigned char reg_address, unsigned char *data_in)
++{
++	int Status, nb_trial;
++
++	at91_twi_write(AT91_TWI_MMR, AT91_TWI_MREAD | AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
++	at91_twi_write(AT91_TWI_IADR, reg_address);
++	at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
++
++	/* Program temporizing period (300us) */
++	udelay(300);
++
++	/* Wait TXcomplete ... */
++	nb_trial = 0;
++	Status = at91_twi_read(AT91_TWI_SR);
++	while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
++		nb_trial++;
++		Status = at91_twi_read(AT91_TWI_SR);
++	}
++
++	if (Status & AT91_TWI_TXCOMP) {
++		*data_in = (unsigned char) at91_twi_read(AT91_TWI_RHR);
++		return ICS1523_ACCESS_OK;
++	}
++	else
++		return ICS1523_ACCESS_ERROR;
++}
++
++/* -----------------------------------------------------------------------------
++ * Write a byte with TWI Interface to the Clock Generator ICS1523
++ * ----------------------------------------------------------------------------- */
++
++static int at91_ics1523_WriteByte(unsigned char reg_address, unsigned char data_out)
++{
++	int Status, nb_trial;
++
++	at91_twi_write(AT91_TWI_MMR, AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
++	at91_twi_write(AT91_TWI_IADR, reg_address);
++	at91_twi_write(AT91_TWI_THR, data_out);
++	at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
++
++	/* Program temporizing period (300us) */
++	udelay(300);
++
++	nb_trial = 0;
++	Status = at91_twi_read(AT91_TWI_SR);
++	while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
++		nb_trial++;
++		if (Status & AT91_TWI_ERROR) {
++			/* If Underrun OR NACK - Start again */
++			at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
++
++			/*  Program temporizing period (300us) */
++			udelay(300);
++		}
++		Status = at91_twi_read(AT91_TWI_SR);
++	};
++
++	if (Status & AT91_TWI_TXCOMP)
++		return ICS1523_ACCESS_OK;
++	else
++		return ICS1523_ACCESS_ERROR;
++}
++
++/* -----------------------------------------------------------------------------
++ * Initialization of the Clock Generator ICS1523
++ * ----------------------------------------------------------------------------- */
++
++int at91_ics1523_init(void)
++{
++	int		nb_trial;
++	int		ack = ICS1523_ACCESS_OK;
++	unsigned int	status = 0xffffffff;
++	struct clk	*twi_clk;
++
++	/* Map in TWI peripheral */
++	twi_base = ioremap(AT91RM9200_BASE_TWI, SZ_16K);
++	if (!twi_base)
++		return -ENOMEM;
++
++	/* pins used for TWI interface */
++	at91_set_A_periph(AT91_PIN_PA25, 0);            /* TWD */
++	at91_set_multi_drive(AT91_PIN_PA25, 1);
++	at91_set_A_periph(AT91_PIN_PA26, 0);            /* TWCK */
++	at91_set_multi_drive(AT91_PIN_PA26, 1);
++
++	/* Enable the TWI clock */
++	twi_clk = clk_get(NULL, "twi_clk");
++	if (IS_ERR(twi_clk))
++		return ICS1523_ACCESS_ERROR;
++	clk_enable(twi_clk);
++
++	/* Disable interrupts */
++	at91_twi_write(AT91_TWI_IDR, -1);
++
++	/* Reset peripheral */
++	at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST);
++
++	/* Set Master mode */
++	at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN);
++
++	/* Set TWI Clock Waveform Generator Register */
++	at91_ics1523_SetTwiClock(60000);     /* MCK in KHz = 60000 KHz */
++
++	/* ICS1523 Initialisation */
++	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) 0);
++	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OE, (unsigned char) (ICS_OEF | ICS_OET2 | ICS_OETCK));
++	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OD, (unsigned char) (ICS_INSEL | 0x7F));
++	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0);
++
++	nb_trial = 0;
++	do {
++		nb_trial++;
++		ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) (ICS_ENDLS | ICS_ENPLS | ICS_PDEN /*| ICS_FUNCSEL*/));
++		ack |= at91_ics1523_WriteByte ((unsigned char) ICS_LCR, (unsigned char) (ICS_PSD | ICS_PFD));
++		ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD0, (unsigned char) 0x39) ; /* 0x7A */
++		ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD1, (unsigned char) 0x00);
++		ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_PLLR));
++
++		/* Program 1ms temporizing period */
++		mdelay(1);
++
++		at91_ics1523_ReadByte ((unsigned char) ICS_SR, (char *)&status);
++	} while (!((unsigned int) status & (unsigned int) ICS_PLLLOCK) && (nb_trial < 10));
++
++	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAC, (unsigned char) 0x03) ; /* 0x01 */
++	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_DPAR));
++
++	/* Program 1ms temporizing period */
++	mdelay(1);
++
++	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0x00);
++
++	/* Program 1ms temporizing period */
++	mdelay(1);
++	
++	/* All done - cleanup */
++	iounmap(twi_base);
++	clk_disable(twi_clk);
++	clk_put(twi_clk);
++
++	return ack;
++}
+Index: linux-2.6.22.1/arch/arm/mach-at91/at91rm9200_devices.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/at91rm9200_devices.c	(revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/at91rm9200_devices.c	(arbetskopia)
+@@ -477,7 +477,18 @@
+  *  SPI
+  * -------------------------------------------------------------------- */
+ 
+-#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)
++#if defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)		/* legacy SPI driver */
++#define SPI_DEVNAME	"at91_spi"
++
++#elif defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE)	/* SPI bitbanging driver */
++#define SPI_DEVNAME	"at91_spi"
++
++#elif defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)	/* new SPI driver */
++#define SPI_DEVNAME	"atmel_spi"
++
++#endif
++
++#ifdef SPI_DEVNAME
+ static u64 spi_dmamask = 0xffffffffUL;
+ 
+ static struct resource spi_resources[] = {
+@@ -494,7 +505,7 @@
+ };
+ 
+ static struct platform_device at91rm9200_spi_device = {
+-	.name		= "at91_spi",
++	.name		= SPI_DEVNAME,
+ 	.id		= 0,
+ 	.dev		= {
+ 				.dma_mask		= &spi_dmamask,
+@@ -603,6 +614,32 @@
+ #endif
+ 
+ 
++#if defined(CONFIG_NEW_LEDS)
++
++static struct platform_device at91_leds = {
++	.name		= "at91_leds",
++	.id		= -1,
++};
++
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
++{
++	if (!nr)
++		return;
++
++	at91_leds.dev.platform_data = leds;
++
++	for ( ; nr; nr--, leds++) {
++		leds->index = nr;	/* first record stores number of leds */
++		at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
++	}
++
++	platform_device_register(&at91_leds);
++}
++#else
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
++#endif
++
++
+ /* --------------------------------------------------------------------
+  *  UART
+  * -------------------------------------------------------------------- */
+Index: linux-2.6.22.1/arch/arm/mach-at91/Makefile
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/Makefile	(revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/Makefile	(arbetskopia)
+@@ -8,6 +8,8 @@
+ obj-		:=
+ 
+ obj-$(CONFIG_PM)		+= pm.o
++obj-$(CONFIG_AT91_SLOW_CLOCK)	+= pm_slowclock.o
++obj-$(CONFIG_ATMEL_TCLIB)	+= tclib.o
+ 
+ # CPU-specific support
+ obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
+@@ -26,10 +28,12 @@
+ obj-$(CONFIG_MACH_KB9200)	+= board-kb9202.o
+ obj-$(CONFIG_MACH_ATEB9200)	+= board-eb9200.o
+ obj-$(CONFIG_MACH_KAFA)		+= board-kafa.o
++obj-$(CONFIG_MACH_CHUB)		+= board-chub.o
+ obj-$(CONFIG_MACH_PICOTUX2XX)	+= board-picotux200.o
+ 
+ # AT91SAM9260 board-specific support
+ obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
++obj-$(CONFIG_MACH_CAM60)	+= board-cam60.o
+ 
+ # AT91SAM9261 board-specific support
+ obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
+@@ -51,7 +55,7 @@
+ obj-$(CONFIG_LEDS) += $(led-y)
+ 
+ # VGA support
+-#obj-$(CONFIG_FB_S1D13XXX)	+= ics1523.o
++obj-$(CONFIG_FB_S1D13XXX)	+= ics1523.o
+ 
+ 
+ ifeq ($(CONFIG_PM_DEBUG),y)
+Index: linux-2.6.22.1/arch/arm/mach-at91/tclib.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/tclib.c	(revision 0)
++++ linux-2.6.22.1/arch/arm/mach-at91/tclib.c	(revision 0)
+@@ -0,0 +1,17 @@
++#include <linux/clk.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++
++#include "tclib.h"
++
++static struct atmel_tcblock *blocks;
++static int nblocks;
++
++/*
++ * Called from the processor-specific init to register the TC Blocks.
++ */
++void __init atmel_tc_init(struct atmel_tcblock *tcblocks, int n)
++{
++	blocks = tcblocks;
++	nblocks = n;
++}
+Index: linux-2.6.22.1/arch/arm/mach-at91/tclib.h
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/tclib.h	(revision 0)
++++ linux-2.6.22.1/arch/arm/mach-at91/tclib.h	(revision 0)
+@@ -0,0 +1,11 @@
++
++#define TC_PER_TCB	3
++
++struct atmel_tcblock {
++	u32 		physaddr;
++	void __iomem	*ioaddr;
++	struct clk	*clk[TC_PER_TCB];
++	int		irq[TC_PER_TCB];
++};
++
++extern void __init atmel_tc_init(struct atmel_tcblock *tcblocks, int n);
+Index: linux-2.6.22.1/arch/arm/mach-at91/at91sam9rl.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/at91sam9rl.c	(revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/at91sam9rl.c	(arbetskopia)
+@@ -246,6 +246,28 @@
+ 
+ 
+ /* --------------------------------------------------------------------
++ *  Timer/Counter library initialization
++ * -------------------------------------------------------------------- */
++#ifdef CONFIG_ATMEL_TCLIB
++
++#include "tclib.h"
++
++static struct atmel_tcblock at91sam9rl_tcblocks[] = {
++	[0] = {
++		.physaddr	= AT91SAM9RL_BASE_TCB0,
++		.irq		= { AT91SAM9RL_ID_TC0, AT91SAM9RL_ID_TC1, AT91SAM9RL_ID_TC2 },
++		.clk		= { &tc0_clk, &tc1_clk, &tc2_clk },
++	}
++};
++
++#define at91sam9rl_tc_init()	atmel_tc_init(at91sam9rl_tcblocks, ARRAY_SIZE(at91sam9rl_tcblocks))
++
++#else
++#define at91sam9rl_tc_init()	do {} while(0)
++#endif
++
++
++/* --------------------------------------------------------------------
+  *  AT91SAM9RL processor initialization
+  * -------------------------------------------------------------------- */
+ 
+@@ -284,6 +306,9 @@
+ 
+ 	/* Register GPIO subsystem */
+ 	at91_gpio_init(at91sam9rl_gpio, 4);
++	
++	/* Initialize the Timer/Counter blocks */
++	at91sam9rl_tc_init();
+ }
+ 
+ /* --------------------------------------------------------------------
+Index: linux-2.6.22.1/arch/arm/mach-at91/at91sam9rl_devices.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/at91sam9rl_devices.c	(revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/at91sam9rl_devices.c	(arbetskopia)
+@@ -370,6 +370,32 @@
+ #endif
+ 
+ 
++#if defined(CONFIG_NEW_LEDS)
++
++static struct platform_device at91_leds = {
++	.name		= "at91_leds",
++	.id		= -1,
++};
++
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
++{
++	if (!nr)
++		return;
++
++	at91_leds.dev.platform_data = leds;
++
++	for ( ; nr; nr--, leds++) {
++		leds->index = nr;	/* first record stores number of leds */
++		at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
++	}
++
++	platform_device_register(&at91_leds);
++}
++#else
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
++#endif
++
++
+ /* --------------------------------------------------------------------
+  *  UART
+  * -------------------------------------------------------------------- */
+Index: linux-2.6.22.1/arch/arm/mach-at91/pm.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/pm.c	(revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/pm.c	(arbetskopia)
+@@ -63,6 +63,7 @@
+  * Verify that all the clocks are correct before entering
+  * slow-clock mode.
+  */
++#warning "SAM9260 only has 3 programmable clocks."
+ static int at91_pm_verify_clocks(void)
+ {
+ 	unsigned long scsr;
+@@ -103,20 +104,15 @@
+ }
+ 
+ /*
+- * Call this from platform driver suspend() to see how deeply to suspend.
++ * This is called from clk_must_disable(), to see how deeply to suspend.
+  * For example, some controllers (like OHCI) need one of the PLL clocks
+  * in order to act as a wakeup source, and those are not available when
+  * going into slow clock mode.
+- *
+- * REVISIT: generalize as clk_will_be_available(clk)?  Other platforms have
+- * the very same problem (but not using at91 main_clk), and it'd be better
+- * to add one generic API rather than lots of platform-specific ones.
+  */
+ int at91_suspend_entering_slow_clock(void)
+ {
+ 	return (target_state == PM_SUSPEND_MEM);
+ }
+-EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
+ 
+ 
+ static void (*slow_clock)(void);
+@@ -205,16 +201,23 @@
+ 	.enter		= at91_pm_enter,
+ };
+ 
++#ifdef CONFIG_AT91_SLOW_CLOCK
++extern void at91rm9200_slow_clock(void);
++extern u32 at91rm9200_slow_clock_sz;
++#endif
++
+ static int __init at91_pm_init(void)
+ {
+-	printk("AT91: Power Management\n");
+-
+-#ifdef CONFIG_AT91_PM_SLOW_CLOCK
+-	/* REVISIT allocations of SRAM should be dynamically managed.
++#ifdef CONFIG_AT91_SLOW_CLOCK
++	/*
++	 * REVISIT allocations of SRAM should be dynamically managed.
+ 	 * FIQ handlers and other components will want SRAM/TCM too...
+ 	 */
+-	slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K));
++	slow_clock = (void *) (AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE + (3 * SZ_4K));
+ 	memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz);
++	printk("AT91: Power Management (with slow clock mode)\n");
++#else
++	printk("AT91: Power Management\n");
+ #endif
+ 
+ 	/* Disable SDRAM low-power mode.  Cannot be used with self-refresh. */
+Index: linux-2.6.22.1/arch/arm/mach-at91/pm_slowclock.S
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/pm_slowclock.S	(revision 0)
++++ linux-2.6.22.1/arch/arm/mach-at91/pm_slowclock.S	(revision 0)
+@@ -0,0 +1,172 @@
++/*
++ * arch/arm/mach-at91/pm_slow_clock.S
++ *
++ *  Copyright (C) 2006 Savin Zlobec
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/linkage.h>
++#include <asm/hardware.h>
++#include <asm/arch/at91_pmc.h>
++#include <asm/arch/at91rm9200_mc.h>
++
++#define MCKRDY_TIMEOUT		1000
++#define MOSCRDY_TIMEOUT 	1000
++#define PLLALOCK_TIMEOUT	1000
++
++	.macro wait_mckrdy
++	mov	r2, #MCKRDY_TIMEOUT
++1:	sub	r2, r2, #1
++	cmp	r2, #0
++	beq	2f
++	ldr	r3, [r1, #AT91_PMC_SR]
++	tst	r3, #AT91_PMC_MCKRDY
++	beq	1b
++2:
++	.endm
++
++	.macro wait_moscrdy
++	mov	r2, #MOSCRDY_TIMEOUT
++1:	sub	r2, r2, #1
++	cmp	r2, #0
++	beq	2f
++	ldr	r3, [r1, #AT91_PMC_SR]
++	tst	r3, #AT91_PMC_MOSCS
++	beq	1b
++2:
++	.endm
++
++	.macro wait_pllalock
++	mov	r2, #PLLALOCK_TIMEOUT
++1:	sub	r2, r2, #1
++	cmp	r2, #0
++	beq	2f
++	ldr	r3, [r1, #AT91_PMC_SR]
++	tst	r3, #AT91_PMC_LOCKA
++	beq	1b
++2:
++	.endm
++
++	.macro wait_plladis
++	mov	r2, #PLLALOCK_TIMEOUT
++1:	sub	r2, r2, #1
++	cmp	r2, #0
++	beq	2f
++	ldr	r3, [r1, #AT91_PMC_SR]
++	tst	r3, #AT91_PMC_LOCKA
++	bne	1b
++2:
++	.endm
++
++	.text
++
++ENTRY(at91rm9200_slow_clock)
++
++	ldr	r1, .at91_va_base_sys
++
++	/* Put SDRAM in self refresh mode */
++
++	b	1f
++	.align	5
++1:	mcr	p15, 0, r0, c7, c10, 4
++	mov	r2, #1
++	str	r2, [r1, #AT91_SDRAMC_SRR]
++
++	/* Save Master clock setting */
++
++	ldr	r2, [r1, #AT91_PMC_MCKR]
++	str	r2, .saved_mckr
++
++	/*
++	 * Set the Master clock source to slow clock
++	 *
++	 * First set the CSS field, wait for MCKRDY
++	 * and than set the PRES and MDIV fields.
++	 *
++	 * See eratta #2[78] for details.
++	 */
++
++	bic	r2, r2, #3
++	str	r2, [r1, #AT91_PMC_MCKR]
++
++	wait_mckrdy
++
++	mov	r2, #0
++	str	r2, [r1, #AT91_PMC_MCKR]
++
++	/* Save PLLA setting and disable it */
++
++	ldr	r2, [r1, #AT91_CKGR_PLLAR]
++	str	r2, .saved_pllar
++
++	mov	r2, #0
++	str	r2, [r1, #AT91_CKGR_PLLAR]
++
++	wait_plladis
++
++	/* Turn off the main oscillator */
++
++	ldr	r2, [r1, #AT91_CKGR_MOR]
++	bic	r2, r2, #AT91_PMC_MOSCEN
++	str	r2, [r1, #AT91_CKGR_MOR]
++
++	/* Wait for interrupt */
++
++	mcr	p15, 0, r0, c7, c0, 4
++
++	/* Turn on the main oscillator */
++
++	ldr	r2, [r1, #AT91_CKGR_MOR]
++	orr	r2, r2, #AT91_PMC_MOSCEN
++	str	r2, [r1, #AT91_CKGR_MOR]
++
++	wait_moscrdy
++
++	/* Restore PLLA setting */
++
++	ldr	r2, .saved_pllar
++	str	r2, [r1, #AT91_CKGR_PLLAR]
++
++	wait_pllalock
++
++	/*
++	 * Restore master clock setting
++	 *
++	 * First set PRES if it was not 0,
++	 * than set CSS and MDIV fields.
++	 * After every change wait for
++	 * MCKRDY.
++	 *
++	 * See eratta #2[78] for details.
++	 */
++
++	ldr	r2, .saved_mckr
++	tst	r2, #0x1C
++	beq	2f
++	and	r2, r2, #0x1C
++	str	r2, [r1, #AT91_PMC_MCKR]
++
++	wait_mckrdy
++
++2:	ldr	r2, .saved_mckr
++	str	r2, [r1, #AT91_PMC_MCKR]
++
++	wait_mckrdy
++
++	mov	pc, lr
++
++.saved_mckr:
++	.word 0
++
++.saved_pllar:
++	.word 0
++
++.at91_va_base_sys:
++	.word AT91_VA_BASE_SYS
++
++ENTRY(at91rm9200_slow_clock_sz)
++	.word .-at91rm9200_slow_clock
+Index: linux-2.6.22.1/arch/arm/mach-at91/board-dk.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/board-dk.c	(revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/board-dk.c	(arbetskopia)
+@@ -73,6 +73,185 @@
+ 	at91rm9200_init_interrupts(NULL);
+ }
+ 
++#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
++#include <video/s1d13xxxfb.h>
++#include <asm/arch/ics1523.h>
++
++/* EPSON S1D13806 FB */
++#define AT91_FB_REG_BASE	0x30000000L
++#define AT91_FB_REG_SIZE	0x200
++#define AT91_FB_VMEM_BASE	0x30200000L
++#define AT91_FB_VMEM_SIZE	0x140000L
++
++static void __init dk_init_video(void)
++{
++	/* NWAIT Signal */
++	at91_set_A_periph(AT91_PIN_PC6, 0);
++
++	/* Initialization of the Static Memory Controller for Chip Select 2 */
++	at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16			/* 16 bit */
++				| AT91_SMC_WSEN | AT91_SMC_NWS_(4)	/* wait states */
++				| AT91_SMC_TDF_(1)			/* float time */
++	);
++
++	at91_ics1523_init();
++}
++
++/* CRT:    (active)   640x480 60Hz (PCLK=CLKI=25.175MHz)
++   Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
++static const struct s1d13xxxfb_regval dk_s1dfb_initregs[] = {
++	{S1DREG_MISC,			0x00},	/* Enable Memory/Register select bit */
++	{S1DREG_COM_DISP_MODE,		0x00},	/* disable display output */
++	{S1DREG_GPIO_CNF0,		0x00},
++	{S1DREG_GPIO_CNF1,		0x00},
++	{S1DREG_GPIO_CTL0,		0x08},
++	{S1DREG_GPIO_CTL1,		0x00},
++	{S1DREG_CLK_CNF,		0x01},	/* no divide, MCLK source is CLKI3 0x02*/
++	{S1DREG_LCD_CLK_CNF,		0x00},
++	{S1DREG_CRT_CLK_CNF,		0x00},
++	{S1DREG_MPLUG_CLK_CNF,		0x00},
++	{S1DREG_CPU2MEM_WST_SEL,	0x01},	/* 2*period(MCLK) - 4ns > period(BCLK) */
++	{S1DREG_SDRAM_REF_RATE,		0x03},	/* 32768 <= MCLK <= 50000 (MHz) */
++	{S1DREG_SDRAM_TC0,		0x00},	/* MCLK source freq (MHz): */
++	{S1DREG_SDRAM_TC1,		0x01},	/* 42 <= MCLK <= 50 */
++	{S1DREG_MEM_CNF,		0x80},	/* SDRAM Initialization - needed before mem access */
++	{S1DREG_PANEL_TYPE,		0x25},	/* std TFT 16bit, 8bit SCP format 2, single passive LCD */
++	{S1DREG_MOD_RATE,		0x00},	/* toggle every FPFRAME */
++	{S1DREG_LCD_DISP_HWIDTH,	0x4F},	/* 680 pix */
++	{S1DREG_LCD_NDISP_HPER,		0x12},	/* 152 pix */
++	{S1DREG_TFT_FPLINE_START,	0x01},	/* 13 pix */
++	{S1DREG_TFT_FPLINE_PWIDTH,	0x0B},	/* 96 pix */
++	{S1DREG_LCD_DISP_VHEIGHT0,	0xDF},
++	{S1DREG_LCD_DISP_VHEIGHT1,	0x01},	/* 480 lines */
++	{S1DREG_LCD_NDISP_VPER,		0x2C},	/* 44 lines */
++	{S1DREG_TFT_FPFRAME_START,	0x0A},	/* 10 lines */
++	{S1DREG_TFT_FPFRAME_PWIDTH,	0x01},	/* 2 lines */
++	{S1DREG_LCD_DISP_MODE,		0x05},  /* 16 bpp */
++	{S1DREG_LCD_MISC,		0x00},	/* dithering enabled, dual panel buffer enabled */
++	{S1DREG_LCD_DISP_START0,	0x00},
++	{S1DREG_LCD_DISP_START1,	0xC8},
++	{S1DREG_LCD_DISP_START2,	0x00},
++	{S1DREG_LCD_MEM_OFF0,		0x80},
++	{S1DREG_LCD_MEM_OFF1,		0x02},
++	{S1DREG_LCD_PIX_PAN,		0x00},
++	{S1DREG_LCD_DISP_FIFO_HTC,	0x3B},
++	{S1DREG_LCD_DISP_FIFO_LTC,	0x3C},
++	{S1DREG_CRT_DISP_HWIDTH,	0x4F},	/* 680 pix */
++	{S1DREG_CRT_NDISP_HPER,		0x13},	/* 160 pix */
++	{S1DREG_CRT_HRTC_START,		0x01},	/* 13 pix */
++	{S1DREG_CRT_HRTC_PWIDTH,	0x0B},	/* 96 pix */
++	{S1DREG_CRT_DISP_VHEIGHT0,	0xDF},
++	{S1DREG_CRT_DISP_VHEIGHT1,	0x01},	/* 480 lines */
++	{S1DREG_CRT_NDISP_VPER,		0x2B},	/* 44 lines */
++	{S1DREG_CRT_VRTC_START,		0x09},	/* 10 lines */
++	{S1DREG_CRT_VRTC_PWIDTH,	0x01},	/* 2 lines */
++	{S1DREG_TV_OUT_CTL,		0x10},
++	{S1DREG_CRT_DISP_MODE,		0x05},	/* 16 bpp */
++	{S1DREG_CRT_DISP_START0,	0x00},
++	{S1DREG_CRT_DISP_START1,	0x00},
++	{S1DREG_CRT_DISP_START2,	0x00},
++	{S1DREG_CRT_MEM_OFF0,		0x80},
++	{S1DREG_CRT_MEM_OFF1,		0x02},
++	{S1DREG_CRT_PIX_PAN,		0x00},
++	{S1DREG_CRT_DISP_FIFO_HTC,	0x3B},
++	{S1DREG_CRT_DISP_FIFO_LTC,	0x3C},
++	{S1DREG_LCD_CUR_CTL,		0x00},	/* inactive */
++	{S1DREG_LCD_CUR_START,		0x01},
++	{S1DREG_LCD_CUR_XPOS0,		0x00},
++	{S1DREG_LCD_CUR_XPOS1,		0x00},
++	{S1DREG_LCD_CUR_YPOS0,		0x00},
++	{S1DREG_LCD_CUR_YPOS1,		0x00},
++	{S1DREG_LCD_CUR_BCTL0,		0x00},
++	{S1DREG_LCD_CUR_GCTL0,		0x00},
++	{S1DREG_LCD_CUR_RCTL0,		0x00},
++	{S1DREG_LCD_CUR_BCTL1,		0x1F},
++	{S1DREG_LCD_CUR_GCTL1,		0x3F},
++	{S1DREG_LCD_CUR_RCTL1,		0x1F},
++	{S1DREG_LCD_CUR_FIFO_HTC,	0x00},
++	{S1DREG_CRT_CUR_CTL,		0x00},	/* inactive */
++	{S1DREG_CRT_CUR_START,		0x01},
++	{S1DREG_CRT_CUR_XPOS0,		0x00},
++	{S1DREG_CRT_CUR_XPOS1,		0x00},
++	{S1DREG_CRT_CUR_YPOS0,		0x00},
++	{S1DREG_CRT_CUR_YPOS1,		0x00},
++	{S1DREG_CRT_CUR_BCTL0,		0x00},
++	{S1DREG_CRT_CUR_GCTL0,		0x00},
++	{S1DREG_CRT_CUR_RCTL0,		0x00},
++	{S1DREG_CRT_CUR_BCTL1,		0x1F},
++	{S1DREG_CRT_CUR_GCTL1,		0x3F},
++	{S1DREG_CRT_CUR_RCTL1,		0x1F},
++	{S1DREG_CRT_CUR_FIFO_HTC,	0x00},
++	{S1DREG_BBLT_CTL0,		0x00},
++	{S1DREG_BBLT_CTL0,		0x00},
++	{S1DREG_BBLT_CC_EXP,		0x00},
++	{S1DREG_BBLT_OP,		0x00},
++	{S1DREG_BBLT_SRC_START0,	0x00},
++	{S1DREG_BBLT_SRC_START1,	0x00},
++	{S1DREG_BBLT_SRC_START2,	0x00},
++	{S1DREG_BBLT_DST_START0,	0x00},
++	{S1DREG_BBLT_DST_START1,	0x00},
++	{S1DREG_BBLT_DST_START2,	0x00},
++	{S1DREG_BBLT_MEM_OFF0,		0x00},
++	{S1DREG_BBLT_MEM_OFF1,		0x00},
++	{S1DREG_BBLT_WIDTH0,		0x00},
++	{S1DREG_BBLT_WIDTH1,		0x00},
++	{S1DREG_BBLT_HEIGHT0,		0x00},
++	{S1DREG_BBLT_HEIGHT1,		0x00},
++	{S1DREG_BBLT_BGC0,		0x00},
++	{S1DREG_BBLT_BGC1,		0x00},
++	{S1DREG_BBLT_FGC0,		0x00},
++	{S1DREG_BBLT_FGC1,		0x00},
++	{S1DREG_LKUP_MODE,		0x00},	/* LCD LUT r | LCD and CRT/TV LUT w */
++	{S1DREG_LKUP_ADDR,		0x00},
++	{S1DREG_PS_CNF,			0x00},	/* Power Save disable */
++	{S1DREG_PS_STATUS,		0x02},	/* LCD Panel down, mem up */
++	{S1DREG_CPU2MEM_WDOGT,		0x00},
++	{S1DREG_COM_DISP_MODE,		0x02},	/* enable CRT display output */
++};
++
++static struct s1d13xxxfb_pdata dk_s1dfb_pdata = {
++	.initregs		= dk_s1dfb_initregs,
++	.initregssize		= ARRAY_SIZE(dk_s1dfb_initregs),
++	.platform_init_video	= dk_init_video,
++};
++
++static u64 s1dfb_dmamask = 0xffffffffUL;
++
++static struct resource dk_s1dfb_resource[] = {
++	[0] = {	/* video mem */
++		.name   = "s1d13806 memory",
++		.start  = AT91_FB_VMEM_BASE,
++		.end    = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
++		.flags  = IORESOURCE_MEM,
++	},
++	[1] = {	/* video registers */
++		.name   = "s1d13806 registers",
++		.start  = AT91_FB_REG_BASE,
++		.end    = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
++		.flags  = IORESOURCE_MEM,
++	},
++};
++
++static struct platform_device dk_s1dfb_device = {
++	.name		= "s1d13806fb",
++	.id		= -1,
++	.dev		= {
++			.dma_mask		= &s1dfb_dmamask,
++			.coherent_dma_mask	= 0xffffffff,
++			.platform_data		= &dk_s1dfb_pdata,
++	},
++	.resource	= dk_s1dfb_resource,
++	.num_resources	= ARRAY_SIZE(dk_s1dfb_resource),
++};
++
++static void __init dk_add_device_video(void)
++{
++	platform_device_register(&dk_s1dfb_device);
++}
++#else
++static void __init dk_add_device_video(void) {}
++#endif
++
+ static struct at91_eth_data __initdata dk_eth_data = {
+ 	.phy_irq_pin	= AT91_PIN_PC4,
+ 	.is_rmii	= 1,
+@@ -151,7 +330,7 @@
+ #define DK_FLASH_SIZE	0x200000
+ 
+ static struct physmap_flash_data dk_flash_data = {
+-	.width	= 2,
++	.width		= 2,
+ };
+ 
+ static struct resource dk_flash_resource = {
+@@ -170,6 +349,13 @@
+ 	.num_resources	= 1,
+ };
+ 
++static struct at91_gpio_led dk_leds[] = {
++	{
++		.name		= "led0",
++		.gpio		= AT91_PIN_PB2,
++		.trigger	= "timer",
++	}
++};
+ 
+ static void __init dk_board_init(void)
+ {
+@@ -200,8 +386,10 @@
+ 	at91_add_device_nand(&dk_nand_data);
+ 	/* NOR Flash */
+ 	platform_device_register(&dk_flash);
++	/* LEDs */
++	at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
+ 	/* VGA */
+-//	dk_add_device_video();
++	dk_add_device_video();
+ }
+ 
+ MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
+Index: linux-2.6.22.1/arch/arm/mach-at91/board-csb337.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/board-csb337.c	(revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/board-csb337.c	(arbetskopia)
+@@ -24,6 +24,7 @@
+ #include <linux/module.h>
+ #include <linux/platform_device.h>
+ #include <linux/spi/spi.h>
++#include <linux/interrupt.h>
+ #include <linux/mtd/physmap.h>
+ 
+ #include <asm/hardware.h>
+@@ -59,6 +60,7 @@
+ 
+ 	/* Setup the LEDs */
+ 	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
++	at91_set_gpio_output(AT91_PIN_PB2, 1);		/* third (unused) LED */
+ 
+ 	/* Setup the serial ports and console */
+ 	at91_init_serial(&csb337_uart_config);
+@@ -149,6 +151,55 @@
+ 	.num_resources	= ARRAY_SIZE(csb_flash_resources),
+ };
+ 
++static struct at91_gpio_led csb337_leds[] = {
++	{
++		.name		= "led0",
++		.gpio		= AT91_PIN_PB0,
++		.trigger	= "heartbeat",
++	},
++	{
++		.name		= "led1",
++		.gpio		= AT91_PIN_PB1,
++		.trigger	= "timer",
++	},
++	{
++		.name		= "led2",
++		.gpio		= AT91_PIN_PB2,
++	}
++};
++
++#if defined(CONFIG_CSB300_WAKE_SW0) || defined(CONFIG_CSB300_WAKE_SW1)
++static irqreturn_t switch_irq_handler(int irq, void *context)
++{
++	return IRQ_HANDLED;
++}
++
++static inline void __init switch_irq_setup(int irq, char *name, unsigned long mode)
++{
++	int res;
++
++	res = request_irq(irq, switch_irq_handler, IRQF_SAMPLE_RANDOM | mode, name, NULL);
++	if (res == 0)
++		enable_irq_wake(irq);
++}
++
++static void __init csb300_switches(void)
++{
++#ifdef CONFIG_CSB300_WAKE_SW0
++	at91_set_A_periph(AT91_PIN_PB29, 1);		/* IRQ0 */
++	switch_irq_setup(AT91RM9200_ID_IRQ0, "csb300_sw0", IRQF_TRIGGER_FALLING);
++#endif
++#ifdef CONFIG_CSB300_WAKE_SW1
++	at91_set_gpio_input(AT91_PIN_PB28, 1);
++	at91_set_deglitch(AT91_PIN_PB28, 1);
++	switch_irq_setup(AT91_PIN_PB28, "csb300_sw1", IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING);
++#endif
++	/* there's also SW2 at PA21, GPIO or TIOA2 */
++}
++#else
++static void __init csb300_switches(void) {}
++#endif
++
+ static void __init csb337_board_init(void)
+ {
+ 	/* Serial */
+@@ -168,8 +219,12 @@
+ 	at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
+ 	/* MMC */
+ 	at91_add_device_mmc(0, &csb337_mmc_data);
++	/* LEDS */
++	at91_gpio_leds(csb337_leds, ARRAY_SIZE(csb337_leds));
+ 	/* NOR flash */
+ 	platform_device_register(&csb_flash);
++	/* Switches on CSB300 */
++	csb300_switches();
+ }
+ 
+ MACHINE_START(CSB337, "Cogent CSB337")
+Index: linux-2.6.22.1/arch/arm/mach-at91/clock.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/clock.c	(revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/clock.c	(arbetskopia)
+@@ -32,6 +32,7 @@
+ #include <asm/arch/cpu.h>
+ 
+ #include "clock.h"
++#include "generic.h"
+ 
+ 
+ /*
+@@ -254,6 +255,23 @@
+ 
+ /*------------------------------------------------------------------------*/
+ 
++#ifdef CONFIG_PM
++
++int clk_must_disable(struct clk *clk)
++{
++	if (!at91_suspend_entering_slow_clock())
++		return 0;
++
++	while (clk->parent)
++		clk = clk->parent;
++	return clk != &clk32k;
++}
++EXPORT_SYMBOL(clk_must_disable);
++
++#endif
++
++/*------------------------------------------------------------------------*/
++
+ #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
+ 
+ /*
+@@ -362,7 +380,7 @@
+ 
+ static int at91_clk_show(struct seq_file *s, void *unused)
+ {
+-	u32		scsr, pcsr, sr;
++	u32		scsr, pcsr, sr, i;
+ 	struct clk	*clk;
+ 
+ 	seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR));
+@@ -372,6 +390,9 @@
+ 	seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
+ 	seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
+ 	seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
++#warning "Hard-coded PCK"
++  	for (i = 0; i < 4; i++)
++  		seq_printf(s, "PCK%d = %8x\n", i, at91_sys_read(AT91_PMC_PCKR(i)));
+ 	seq_printf(s, "SR   = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
+ 
+ 	seq_printf(s, "\n");
+Index: linux-2.6.22.1/arch/arm/mach-at91/board-cam60.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/board-cam60.c	(revision 0)
++++ linux-2.6.22.1/arch/arm/mach-at91/board-cam60.c	(revision 0)
+@@ -0,0 +1,148 @@
++/*
++ * KwikByte CAM60
++ *
++ * based on board-sam9260ek.c
++ *   Copyright (C) 2005 SAN People
++ *   Copyright (C) 2006 Atmel
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++
++#include <asm/hardware.h>
++#include <asm/setup.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/at91sam926x_mc.h>
++
++#include "generic.h"
++
++
++/*
++ * Serial port configuration.
++ *    0 .. 5 = USART0 .. USART5
++ *    6      = DBGU
++ */
++static struct at91_uart_config __initdata cam60_uart_config = {
++	.console_tty	= 0,				/* ttyS0 */
++	.nr_tty		= 1,
++	.tty_map	= { 6, -1, -1, -1, -1, -1, -1 }	/* ttyS0, ..., ttyS6 */
++};
++
++static void __init cam60_map_io(void)
++{
++	/* Initialize processor: 10 MHz crystal */
++	at91sam9260_initialize(10000000);
++
++	/* Setup the serial ports and console */
++	at91_init_serial(&cam60_uart_config);
++}
++
++static void __init cam60_init_irq(void)
++{
++	at91sam9260_init_interrupts(NULL);
++}
++
++
++/*
++ * SPI devices.
++ */
++#if defined(CONFIG_MTD_DATAFLASH)
++static struct mtd_partition __initdata cam60_spi_partitions[] = {
++	{
++		.name	= "BOOT1",
++		.offset	= 0,
++		.size	= 4 * 1056,
++	},
++	{
++		.name	= "BOOT2",
++		.offset	= MTDPART_OFS_NXTBLK,
++		.size	= 256 * 1056,
++	},
++	{
++		.name	= "kernel",
++		.offset	= MTDPART_OFS_NXTBLK,
++		.size	= 2222 * 1056,
++	},
++	{
++		.name	= "file system",
++		.offset	= MTDPART_OFS_NXTBLK,
++		.size	= MTDPART_SIZ_FULL,
++	},
++};
++
++static struct flash_platform_data __initdata cam60_spi_flash_platform_data = {
++	.name		= "spi_flash",
++	.parts		= cam60_spi_partitions,
++	.nr_parts	= ARRAY_SIZE(cam60_spi_partitions)
++};
++#endif
++
++static struct spi_board_info cam60_spi_devices[] = {
++#if defined(CONFIG_MTD_DATAFLASH)
++	{	/* DataFlash chip */
++		.modalias	= "mtd_dataflash",
++		.chip_select	= 0,
++		.max_speed_hz	= 15 * 1000 * 1000,
++		.bus_num	= 0,
++		.platform_data	= &cam60_spi_flash_platform_data
++	},
++#endif
++};
++
++
++/*
++ * MACB Ethernet device
++ */
++static struct __initdata at91_eth_data cam60_macb_data = {
++	.phy_irq_pin	= AT91_PIN_PB5,
++	.is_rmii	= 0,
++};
++
++
++static void __init cam60_board_init(void)
++{
++	/* Serial */
++	at91_add_device_serial();
++	/* SPI */
++	at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices));
++	/* Ethernet */
++	at91_add_device_eth(&cam60_macb_data);
++}
++
++MACHINE_START(CAM60, "KwikByte CAM60")
++	/* Maintainer: KwikByte */
++	.phys_io	= AT91_BASE_SYS,
++	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
++	.boot_params	= AT91_SDRAM_BASE + 0x100,
++	.timer		= &at91sam926x_timer,
++	.map_io		= cam60_map_io,
++	.init_irq	= cam60_init_irq,
++	.init_machine	= cam60_board_init,
++MACHINE_END
+Index: linux-2.6.22.1/arch/arm/configs/cam60_defconfig
+===================================================================
+--- linux-2.6.22.1/arch/arm/configs/cam60_defconfig	(revision 0)
++++ linux-2.6.22.1/arch/arm/configs/cam60_defconfig	(revision 0)
+@@ -0,0 +1,954 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.20
++# Tue May  1 21:06:33 2007
++#
++CONFIG_ARM=y
++# CONFIG_GENERIC_TIME is not set
++CONFIG_MMU=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# Code maturity level options
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++
++#
++# General setup
++#
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++# CONFIG_SWAP is not set
++CONFIG_SYSVIPC=y
++# CONFIG_IPC_NS is not set
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_UTS_NS is not set
++# CONFIG_AUDIT is not set
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++# CONFIG_EMBEDDED is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SHMEM=y
++CONFIG_SLAB=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++# CONFIG_SLOB is not set
++
++#
++# Loadable module support
++#
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
++
++#
++# Block layer
++#
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++
++#
++# System Type
++#
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++CONFIG_ARCH_AT91=y
++# CONFIG_ARCH_CLPS7500 is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CO285 is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_OMAP is not set
++
++#
++# Atmel AT91 System-on-Chip
++#
++# CONFIG_ARCH_AT91RM9200 is not set
++CONFIG_ARCH_AT91SAM9260=y
++# CONFIG_ARCH_AT91SAM9261 is not set
++# CONFIG_ARCH_AT91SAM9263 is not set
++
++#
++# AT91SAM9260 Board Type
++#
++# CONFIG_MACH_AT91SAM9260EK is not set
++CONFIG_MACH_CAM60=y
++
++#
++# AT91 Board Options
++#
++
++#
++# AT91 Feature Selections
++#
++# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
++
++#
++# Processor Type
++#
++CONFIG_CPU_32=y
++CONFIG_CPU_ARM926T=y
++CONFIG_CPU_32v5=y
++CONFIG_CPU_ABRT_EV5TJ=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++
++#
++# Processor Features
++#
++# CONFIG_ARM_THUMB is not set
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++
++#
++# Bus support
++#
++
++#
++# PCCARD (PCMCIA/CardBus) support
++#
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++# CONFIG_PREEMPT is not set
++# CONFIG_NO_IDLE_HZ is not set
++CONFIG_HZ=100
++# CONFIG_AEABI is not set
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4096
++# CONFIG_RESOURCES_64BIT is not set
++# CONFIG_LEDS is not set
++CONFIG_ALIGNMENT_TRAP=y
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0x22000000
++CONFIG_ZBOOT_ROM_BSS=0x20004000
++# CONFIG_ZBOOT_ROM is not set
++CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock3 rootfstype=jffs2 mem=64M"
++# CONFIG_XIP_KERNEL is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++# CONFIG_VFP is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_ARTHUR is not set
++
++#
++# Power management options
++#
++# CONFIG_PM is not set
++# CONFIG_APM is not set
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++# CONFIG_NETDEBUG is not set
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++
++#
++# DCCP Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_DCCP is not set
++
++#
++# SCTP Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_SCTP is not set
++
++#
++# TIPC Configuration (EXPERIMENTAL)
++#
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++
++#
++# QoS and/or fair queueing
++#
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_IEEE80211 is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_SYS_HYPERVISOR is not set
++
++#
++# Connector - unified userspace <-> kernelspace linker
++#
++# CONFIG_CONNECTOR is not set
++
++#
++# Memory Technology Devices (MTD)
++#
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++CONFIG_MTD_CONCAT=y
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++# CONFIG_MTD_CFI_AMDSTD is not set
++# CONFIG_MTD_CFI_STAA is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++# CONFIG_MTD_OBSOLETE_CHIPS is not set
++
++#
++# Mapping drivers for chip access
++#
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++# CONFIG_MTD_PHYSMAP is not set
++# CONFIG_MTD_ARM_INTEGRATOR is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++CONFIG_MTD_DATAFLASH=y
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++
++#
++# NAND Flash Device Drivers
++#
++# CONFIG_MTD_NAND is not set
++
++#
++# OneNAND Flash Device Drivers
++#
++# CONFIG_MTD_ONENAND is not set
++
++#
++# Parallel port support
++#
++# CONFIG_PARPORT is not set
++
++#
++# Plug and Play support
++#
++
++#
++# Block devices
++#
++# CONFIG_BLK_DEV_COW_COMMON is not set
++# CONFIG_BLK_DEV_LOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=8192
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++CONFIG_BLK_DEV_INITRD=y
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_NETLINK is not set
++
++#
++# Serial ATA (prod) and Parallel ATA (experimental) drivers
++#
++# CONFIG_ATA is not set
++
++#
++# Multi-device support (RAID and LVM)
++#
++# CONFIG_MD is not set
++
++#
++# Fusion MPT device support
++#
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++
++#
++# I2O device support
++#
++
++#
++# Network device support
++#
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++
++#
++# PHY device support
++#
++# CONFIG_PHYLIB is not set
++
++#
++# Ethernet (10 or 100Mbit)
++#
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++CONFIG_MACB=y
++# CONFIG_SMC91X is not set
++# CONFIG_DM9000 is not set
++
++#
++# Ethernet (1000 Mbit)
++#
++
++#
++# Ethernet (10000 Mbit)
++#
++
++#
++# Token Ring devices
++#
++
++#
++# Wireless LAN (non-hamradio)
++#
++# CONFIG_NET_RADIO is not set
++
++#
++# Wan interfaces
++#
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++
++#
++# ISDN subsystem
++#
++# CONFIG_ISDN is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_TSDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++
++#
++# IPMI
++#
++# CONFIG_IPMI_HANDLER is not set
++
++#
++# Watchdog Cards
++#
++# CONFIG_WATCHDOG is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++# CONFIG_DTLK is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++
++#
++# TPM devices
++#
++# CONFIG_TCG_TPM is not set
++
++#
++# I2C support
++#
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++
++#
++# SPI Protocol Masters
++#
++
++#
++# Dallas's 1-wire bus
++#
++# CONFIG_W1 is not set
++
++#
++# Hardware Monitoring support
++#
++# CONFIG_HWMON is not set
++# CONFIG_HWMON_VID is not set
++
++#
++# Misc devices
++#
++# CONFIG_TIFM_CORE is not set
++
++#
++# LED devices
++#
++# CONFIG_NEW_LEDS is not set
++
++#
++# LED drivers
++#
++
++#
++# LED Triggers
++#
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++
++#
++# Digital Video Broadcasting Devices
++#
++# CONFIG_DVB is not set
++
++#
++# Graphics support
++#
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB is not set
++
++#
++# Console display driver support
++#
++# CONFIG_VGA_CONSOLE is not set
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++
++#
++# HID Devices
++#
++# CONFIG_HID is not set
++
++#
++# USB support
++#
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# USB Gadget Support
++#
++# CONFIG_USB_GADGET is not set
++
++#
++# MMC/SD Card support
++#
++# CONFIG_MMC is not set
++
++#
++# Real Time Clock
++#
++CONFIG_RTC_LIB=y
++# CONFIG_RTC_CLASS is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++CONFIG_DNOTIFY=y
++# CONFIG_AUTOFS_FS is not set
++CONFIG_AUTOFS4_FS=y
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++# CONFIG_MSDOS_FS is not set
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_RAMFS=y
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++
++#
++# Network File Systems
++#
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++# CONFIG_9P_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++
++#
++# Native Language Support
++#
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++CONFIG_NLS_CODEPAGE_850=y
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++# CONFIG_NLS_UTF8 is not set
++
++#
++# Distributed Lock Manager
++#
++# CONFIG_DLM is not set
++
++#
++# Profiling support
++#
++# CONFIG_PROFILING is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_DETECT_SOFTLOCKUP=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_DEBUG_SLAB is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_RWSEMS is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++CONFIG_FRAME_POINTER=y
++CONFIG_FORCED_INLINING=y
++# CONFIG_RCU_TORTURE_TEST is not set
++CONFIG_DEBUG_USER=y
++# CONFIG_DEBUG_ERRORS is not set
++CONFIG_DEBUG_LL=y
++# CONFIG_DEBUG_ICEDCC is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++
++#
++# Cryptographic options
++#
++# CONFIG_CRYPTO is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++CONFIG_CRC32=y
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_IOMAP_COPY=y
+Index: linux-2.6.22.1/arch/arm/configs/kb9202_defconfig
+===================================================================
+--- linux-2.6.22.1/arch/arm/configs/kb9202_defconfig	(revision 1)
++++ linux-2.6.22.1/arch/arm/configs/kb9202_defconfig	(arbetskopia)
+@@ -1,19 +1,31 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.13-rc2
+-# Sun Aug 14 19:26:59 2005
++# Linux kernel version: 2.6.21
++# Mon May  7 11:43:14 2007
+ #
+ CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++# CONFIG_GENERIC_TIME is not set
+ CONFIG_MMU=y
+-CONFIG_UID16=y
++# CONFIG_NO_IOPORT is not set
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_ZONE_DMA=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+ 
+ #
+ # Code maturity level options
+ #
+-# CONFIG_EXPERIMENTAL is not set
+-CONFIG_CLEAN_COMPILE=y
++CONFIG_EXPERIMENTAL=y
+ CONFIG_BROKEN_ON_SMP=y
+ CONFIG_INIT_ENV_ARG_LIMIT=32
+ 
+@@ -21,54 +33,103 @@
+ # General setup
+ #
+ CONFIG_LOCALVERSION=""
+-# CONFIG_SWAP is not set
+-# CONFIG_SYSVIPC is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++# CONFIG_IPC_NS is not set
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_BSD_PROCESS_ACCT=y
++# CONFIG_BSD_PROCESS_ACCT_V3 is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_UTS_NS is not set
++CONFIG_AUDIT=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+ CONFIG_SYSCTL=y
+-# CONFIG_AUDIT is not set
+-CONFIG_HOTPLUG=y
+-# CONFIG_KOBJECT_UEVENT is not set
+-# CONFIG_IKCONFIG is not set
+ # CONFIG_EMBEDDED is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
+ CONFIG_KALLSYMS=y
+ # CONFIG_KALLSYMS_ALL is not set
+-# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_KALLSYMS_EXTRA_PASS=y
++CONFIG_HOTPLUG=y
+ CONFIG_PRINTK=y
+ CONFIG_BUG=y
++CONFIG_ELF_CORE=y
+ CONFIG_BASE_FULL=y
+ CONFIG_FUTEX=y
+ CONFIG_EPOLL=y
+-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+ CONFIG_SHMEM=y
+-CONFIG_CC_ALIGN_FUNCTIONS=0
+-CONFIG_CC_ALIGN_LABELS=0
+-CONFIG_CC_ALIGN_LOOPS=0
+-CONFIG_CC_ALIGN_JUMPS=0
++CONFIG_SLAB=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
++# CONFIG_SLOB is not set
+ 
+ #
+ # Loadable module support
+ #
+ CONFIG_MODULES=y
+ CONFIG_MODULE_UNLOAD=y
+-CONFIG_OBSOLETE_MODPARM=y
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++CONFIG_MODVERSIONS=y
++CONFIG_MODULE_SRCVERSION_ALL=y
+ CONFIG_KMOD=y
+ 
+ #
++# Block layer
++#
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++
++#
+ # System Type
+ #
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++CONFIG_ARCH_AT91=y
+ # CONFIG_ARCH_CLPS7500 is not set
+ # CONFIG_ARCH_CLPS711X is not set
+ # CONFIG_ARCH_CO285 is not set
+ # CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
+ # CONFIG_ARCH_FOOTBRIDGE is not set
+-# CONFIG_ARCH_INTEGRATOR is not set
+-# CONFIG_ARCH_IOP3XX is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IOP13XX is not set
+ # CONFIG_ARCH_IXP4XX is not set
+ # CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP23XX is not set
+ # CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_PNX4008 is not set
+ # CONFIG_ARCH_PXA is not set
+ # CONFIG_ARCH_RPC is not set
+ # CONFIG_ARCH_SA1100 is not set
+@@ -76,34 +137,52 @@
+ # CONFIG_ARCH_SHARK is not set
+ # CONFIG_ARCH_LH7A40X is not set
+ # CONFIG_ARCH_OMAP is not set
+-# CONFIG_ARCH_VERSATILE is not set
+-# CONFIG_ARCH_IMX is not set
+-# CONFIG_ARCH_H720X is not set
+-# CONFIG_ARCH_AAEC2000 is not set
+-CONFIG_ARCH_AT91=y
++
++#
++# Atmel AT91 System-on-Chip
++#
+ CONFIG_ARCH_AT91RM9200=y
++# CONFIG_ARCH_AT91SAM9260 is not set
++# CONFIG_ARCH_AT91SAM9261 is not set
++# CONFIG_ARCH_AT91SAM9263 is not set
+ 
+ #
+-# AT91RM9200 Implementations
++# AT91RM9200 Board Type
+ #
++# CONFIG_MACH_ONEARM is not set
+ # CONFIG_ARCH_AT91RM9200DK is not set
+ # CONFIG_MACH_AT91RM9200EK is not set
+ # CONFIG_MACH_CSB337 is not set
+ # CONFIG_MACH_CSB637 is not set
+ # CONFIG_MACH_CARMEVA is not set
++# CONFIG_MACH_ATEB9200 is not set
+ CONFIG_MACH_KB9200=y
++# CONFIG_MACH_KAFA is not set
++# CONFIG_MACH_CHUB is not set
+ 
+ #
++# AT91 Board Options
++#
++
++#
++# AT91 Feature Selections
++#
++# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
++# CONFIG_ATMEL_TCLIB is not set
++
++#
+ # Processor Type
+ #
+ CONFIG_CPU_32=y
+ CONFIG_CPU_ARM920T=y
+-CONFIG_CPU_32v4=y
++CONFIG_CPU_32v4T=y
+ CONFIG_CPU_ABRT_EV4T=y
+ CONFIG_CPU_CACHE_V4WT=y
+ CONFIG_CPU_CACHE_VIVT=y
+ CONFIG_CPU_COPY_V4WB=y
+ CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
+ 
+ #
+ # Processor Features
+@@ -112,24 +191,44 @@
+ # CONFIG_CPU_ICACHE_DISABLE is not set
+ # CONFIG_CPU_DCACHE_DISABLE is not set
+ # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_OUTER_CACHE is not set
+ 
+ #
+ # Bus support
+ #
+-CONFIG_ISA_DMA_API=y
+ 
+ #
+ # PCCARD (PCMCIA/CardBus) support
+ #
+-# CONFIG_PCCARD is not set
++CONFIG_PCCARD=m
++# CONFIG_PCMCIA_DEBUG is not set
++CONFIG_PCMCIA=m
++CONFIG_PCMCIA_LOAD_CIS=y
++CONFIG_PCMCIA_IOCTL=y
+ 
+ #
++# PC-card bridges
++#
++# CONFIG_AT91_CF is not set
++
++#
+ # Kernel Features
+ #
++# CONFIG_PREEMPT is not set
+ # CONFIG_NO_IDLE_HZ is not set
++CONFIG_HZ=100
++# CONFIG_AEABI is not set
+ # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
+ CONFIG_FLATMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4096
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
+ # CONFIG_LEDS is not set
+ CONFIG_ALIGNMENT_TRAP=y
+ 
+@@ -138,8 +237,10 @@
+ #
+ CONFIG_ZBOOT_ROM_TEXT=0x10000000
+ CONFIG_ZBOOT_ROM_BSS=0x20040000
+-CONFIG_ZBOOT_ROM=y
+-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933"
++# CONFIG_ZBOOT_ROM is not set
++CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
+ 
+ #
+ # Floating point emulation
+@@ -150,6 +251,7 @@
+ #
+ CONFIG_FPE_NWFPE=y
+ # CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
+ 
+ #
+ # Userspace binary formats
+@@ -165,6 +267,96 @@
+ # CONFIG_PM is not set
+ 
+ #
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++# CONFIG_NETDEBUG is not set
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
++# CONFIG_IP_PNP_BOOTP is not set
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++
++#
++# DCCP Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_DCCP is not set
++
++#
++# SCTP Configuration (EXPERIMENTAL)
++#
++CONFIG_IP_SCTP=m
++# CONFIG_SCTP_DBG_MSG is not set
++# CONFIG_SCTP_DBG_OBJCNT is not set
++# CONFIG_SCTP_HMAC_NONE is not set
++# CONFIG_SCTP_HMAC_SHA1 is not set
++CONFIG_SCTP_HMAC_MD5=y
++
++#
++# TIPC Configuration (EXPERIMENTAL)
++#
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++
++#
++# QoS and/or fair queueing
++#
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_IEEE80211 is not set
++
++#
+ # Device Drivers
+ #
+ 
+@@ -173,15 +365,97 @@
+ #
+ CONFIG_STANDALONE=y
+ CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_FW_LOADER is not set
+-CONFIG_DEBUG_DRIVER=y
++CONFIG_FW_LOADER=y
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
+ 
+ #
++# Connector - unified userspace <-> kernelspace linker
++#
++# CONFIG_CONNECTOR is not set
++
++#
+ # Memory Technology Devices (MTD)
+ #
+-# CONFIG_MTD is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++CONFIG_MTD_CONCAT=y
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
+ 
+ #
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++# CONFIG_MTD_OBSOLETE_CHIPS is not set
++
++#
++# Mapping drivers for chip access
++#
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++
++#
++# NAND Flash Device Drivers
++#
++CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_SMC is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++CONFIG_MTD_NAND_AT91=y
++# CONFIG_MTD_NAND_NANDSIM is not set
++
++#
++# OneNAND Flash Device Drivers
++#
++# CONFIG_MTD_ONENAND is not set
++
++#
+ # Parallel port support
+ #
+ # CONFIG_PARPORT is not set
+@@ -189,6 +463,7 @@
+ #
+ # Plug and Play support
+ #
++# CONFIG_PNPACPI is not set
+ 
+ #
+ # Block devices
+@@ -196,28 +471,27 @@
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+ CONFIG_BLK_DEV_LOOP=y
+ # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-CONFIG_BLK_DEV_NBD=y
++# CONFIG_BLK_DEV_NBD is not set
+ # CONFIG_BLK_DEV_UB is not set
+ CONFIG_BLK_DEV_RAM=y
+ CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=4096
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
++CONFIG_BLK_DEV_RAM_SIZE=16384
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ # CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
+ 
+ #
+-# IO Schedulers
++# ATA/ATAPI/MFM/RLL support
+ #
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_IDE is not set
+ 
+ #
+ # SCSI device support
+ #
++# CONFIG_RAID_ATTRS is not set
+ CONFIG_SCSI=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
+ CONFIG_SCSI_PROC_FS=y
+ 
+ #
+@@ -233,24 +507,41 @@
+ #
+ # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+ #
+-# CONFIG_SCSI_MULTI_LUN is not set
+-# CONFIG_SCSI_CONSTANTS is not set
+-# CONFIG_SCSI_LOGGING is not set
++CONFIG_SCSI_MULTI_LUN=y
++CONFIG_SCSI_CONSTANTS=y
++CONFIG_SCSI_LOGGING=y
++# CONFIG_SCSI_SCAN_ASYNC is not set
+ 
+ #
+-# SCSI Transport Attributes
++# SCSI Transports
+ #
+-# CONFIG_SCSI_SPI_ATTRS is not set
++CONFIG_SCSI_SPI_ATTRS=m
+ # CONFIG_SCSI_FC_ATTRS is not set
+ # CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
+ 
+ #
+ # SCSI low-level drivers
+ #
+-# CONFIG_SCSI_SATA is not set
++# CONFIG_ISCSI_TCP is not set
+ # CONFIG_SCSI_DEBUG is not set
+ 
+ #
++# PCMCIA SCSI adapter support
++#
++# CONFIG_PCMCIA_AHA152X is not set
++# CONFIG_PCMCIA_FDOMAIN is not set
++# CONFIG_PCMCIA_NINJA_SCSI is not set
++# CONFIG_PCMCIA_QLOGIC is not set
++# CONFIG_PCMCIA_SYM53C500 is not set
++
++#
++# Serial ATA (prod) and Parallel ATA (experimental) drivers
++#
++# CONFIG_ATA is not set
++
++#
+ # Multi-device support (RAID and LVM)
+ #
+ # CONFIG_MD is not set
+@@ -269,61 +560,8 @@
+ #
+ 
+ #
+-# Networking support
++# Network device support
+ #
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-# CONFIG_IP_PNP_BOOTP is not set
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_TUNNEL is not set
+-# CONFIG_IP_TCPDIAG is not set
+-# CONFIG_IP_TCPDIAG_IPV6 is not set
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_BIC=y
+-# CONFIG_IPV6 is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-
+-#
+-# QoS and/or fair queueing
+-#
+-# CONFIG_NET_SCHED is not set
+-# CONFIG_NET_CLS_ROUTE is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+ CONFIG_NETDEVICES=y
+ # CONFIG_DUMMY is not set
+ # CONFIG_BONDING is not set
+@@ -331,6 +569,11 @@
+ # CONFIG_TUN is not set
+ 
+ #
++# PHY device support
++#
++# CONFIG_PHYLIB is not set
++
++#
+ # Ethernet (10 or 100Mbit)
+ #
+ CONFIG_NET_ETHERNET=y
+@@ -357,11 +600,20 @@
+ # CONFIG_NET_RADIO is not set
+ 
+ #
++# PCMCIA network device support
++#
++# CONFIG_NET_PCMCIA is not set
++
++#
+ # Wan interfaces
+ #
+ # CONFIG_WAN is not set
+ # CONFIG_PPP is not set
+ # CONFIG_SLIP is not set
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
+ 
+ #
+ # ISDN subsystem
+@@ -372,6 +624,7 @@
+ # Input device support
+ #
+ CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
+ 
+ #
+ # Userland interfaces
+@@ -397,9 +650,7 @@
+ #
+ # Hardware I/O ports
+ #
+-CONFIG_SERIO=y
+-# CONFIG_SERIO_SERPORT is not set
+-# CONFIG_SERIO_RAW is not set
++# CONFIG_SERIO is not set
+ # CONFIG_GAMEPORT is not set
+ 
+ #
+@@ -408,6 +659,7 @@
+ CONFIG_VT=y
+ CONFIG_VT_CONSOLE=y
+ CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
+ # CONFIG_SERIAL_NONSTANDARD is not set
+ 
+ #
+@@ -420,11 +672,11 @@
+ #
+ CONFIG_SERIAL_ATMEL=y
+ CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
+ CONFIG_SERIAL_CORE=y
+ CONFIG_SERIAL_CORE_CONSOLE=y
+ CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_LEGACY_PTYS is not set
+ 
+ #
+ # IPMI
+@@ -435,21 +687,23 @@
+ # Watchdog Cards
+ #
+ # CONFIG_WATCHDOG is not set
++# CONFIG_HW_RANDOM is not set
+ # CONFIG_NVRAM is not set
+-# CONFIG_RTC is not set
+-# CONFIG_AT91RM9200_RTC is not set
+ # CONFIG_DTLK is not set
+ # CONFIG_R3964 is not set
+ 
+ #
+-# Ftape, the floppy tape device driver
++# PCMCIA character devices
+ #
++# CONFIG_SYNCLINK_CS is not set
++# CONFIG_CARDMAN_4000 is not set
++# CONFIG_CARDMAN_4040 is not set
+ # CONFIG_RAW_DRIVER is not set
+ 
+ #
+ # TPM devices
+ #
+-# CONFIG_AT91_SPI is not set
++# CONFIG_TCG_TPM is not set
+ 
+ #
+ # I2C support
+@@ -457,10 +711,50 @@
+ # CONFIG_I2C is not set
+ 
+ #
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++
++#
++# Dallas's 1-wire bus
++#
++# CONFIG_W1 is not set
++
++#
++# Hardware Monitoring support
++#
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_ABITUGURU is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_VT1211 is not set
++CONFIG_HWMON_DEBUG_CHIP=y
++
++#
+ # Misc devices
+ #
+ 
+ #
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# LED devices
++#
++# CONFIG_NEW_LEDS is not set
++
++#
++# LED drivers
++#
++
++#
++# LED Triggers
++#
++
++#
+ # Multimedia devices
+ #
+ # CONFIG_VIDEO_DEV is not set
+@@ -469,100 +763,156 @@
+ # Digital Video Broadcasting Devices
+ #
+ # CONFIG_DVB is not set
++# CONFIG_USB_DABUSB is not set
+ 
+ #
+ # Graphics support
+ #
+-# CONFIG_FB is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_BACKLIGHT_CLASS_DEVICE=y
++# CONFIG_LCD_CLASS_DEVICE is not set
++CONFIG_BACKLIGHT_KB920x=y
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++CONFIG_FB_MODE_HELPERS=y
++CONFIG_FB_TILEBLITTING=y
+ 
+ #
++# Frame buffer hardware drivers
++#
++CONFIG_FB_S1D15605=y
++# CONFIG_FB_S1D13XXX is not set
++# CONFIG_FB_VIRTUAL is not set
++
++#
+ # Console display driver support
+ #
+ # CONFIG_VGA_CONSOLE is not set
+ CONFIG_DUMMY_CONSOLE=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
++CONFIG_FONTS=y
++# CONFIG_FONT_8x8 is not set
++# CONFIG_FONT_8x16 is not set
++# CONFIG_FONT_6x11 is not set
++# CONFIG_FONT_7x14 is not set
++# CONFIG_FONT_PEARL_8x8 is not set
++# CONFIG_FONT_ACORN_8x8 is not set
++CONFIG_FONT_MINI_4x6=y
++# CONFIG_FONT_SUN8x16 is not set
++# CONFIG_FONT_SUN12x22 is not set
++# CONFIG_FONT_10x18 is not set
+ 
+ #
++# Logo configuration
++#
++# CONFIG_LOGO is not set
++
++#
+ # Sound
+ #
+ # CONFIG_SOUND is not set
+ 
+ #
++# HID Devices
++#
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++
++#
+ # USB support
+ #
+ CONFIG_USB_ARCH_HAS_HCD=y
+ CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
+ CONFIG_USB=y
+-CONFIG_USB_DEBUG=y
++# CONFIG_USB_DEBUG is not set
+ 
+ #
+ # Miscellaneous USB options
+ #
+ CONFIG_USB_DEVICEFS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG is not set
+ 
+ #
+ # USB Host Controller Drivers
+ #
+ # CONFIG_USB_ISP116X_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
+-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+ # CONFIG_USB_SL811_HCD is not set
+ 
+ #
+ # USB Device Class drivers
+ #
+-# CONFIG_USB_BLUETOOTH_TTY is not set
+ # CONFIG_USB_ACM is not set
+ # CONFIG_USB_PRINTER is not set
+ 
+ #
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+ #
++
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
+ CONFIG_USB_STORAGE=y
+-CONFIG_USB_STORAGE_DEBUG=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
+ # CONFIG_USB_STORAGE_FREECOM is not set
+ # CONFIG_USB_STORAGE_DPCM is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++CONFIG_USB_LIBUSUAL=y
+ 
+ #
+ # USB Input Devices
+ #
+-# CONFIG_USB_HID is not set
+-
+-#
+-# USB HID Boot Protocol drivers
+-#
+-# CONFIG_USB_KBD is not set
+-# CONFIG_USB_MOUSE is not set
++CONFIG_USB_HID=y
++# CONFIG_USB_HIDINPUT_POWERBOOK is not set
++# CONFIG_HID_FF is not set
++# CONFIG_USB_HIDDEV is not set
+ # CONFIG_USB_AIPTEK is not set
+ # CONFIG_USB_WACOM is not set
+ # CONFIG_USB_ACECAD is not set
+ # CONFIG_USB_KBTAB is not set
+ # CONFIG_USB_POWERMATE is not set
+-# CONFIG_USB_MTOUCH is not set
+-# CONFIG_USB_ITMTOUCH is not set
+-# CONFIG_USB_EGALAX is not set
++# CONFIG_USB_TOUCHSCREEN is not set
++# CONFIG_USB_YEALINK is not set
+ # CONFIG_USB_XPAD is not set
+ # CONFIG_USB_ATI_REMOTE is not set
++# CONFIG_USB_ATI_REMOTE2 is not set
++# CONFIG_USB_KEYSPAN_REMOTE is not set
++# CONFIG_USB_APPLETOUCH is not set
++# CONFIG_USB_GTCO is not set
+ 
+ #
+ # USB Imaging devices
+ #
++# CONFIG_USB_MDC800 is not set
+ # CONFIG_USB_MICROTEK is not set
+ 
+ #
+-# USB Multimedia devices
+-#
+-# CONFIG_USB_DABUSB is not set
+-
+-#
+-# Video4Linux support is needed for USB Multimedia device support
+-#
+-
+-#
+ # USB Network Adapters
+ #
++# CONFIG_USB_CATC is not set
+ # CONFIG_USB_KAWETH is not set
+ # CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET_MII is not set
+ # CONFIG_USB_USBNET is not set
+ # CONFIG_USB_MON is not set
+ 
+@@ -580,12 +930,23 @@
+ #
+ # CONFIG_USB_EMI62 is not set
+ # CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
+ # CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
+ # CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
+ # CONFIG_USB_CYTHERM is not set
+-# CONFIG_USB_PHIDGETKIT is not set
+-# CONFIG_USB_PHIDGETSERVO is not set
++# CONFIG_USB_PHIDGET is not set
+ # CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
+ 
+ #
+ # USB DSL modem support
+@@ -599,36 +960,51 @@
+ #
+ # MMC/SD Card support
+ #
+-# CONFIG_MMC is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_AT91=y
+ 
+ #
++# Real Time Clock
++#
++CONFIG_RTC_LIB=y
++# CONFIG_RTC_CLASS is not set
++
++#
+ # File systems
+ #
+ CONFIG_EXT2_FS=y
+ CONFIG_EXT2_FS_XATTR=y
+-# CONFIG_EXT2_FS_POSIX_ACL is not set
+-# CONFIG_EXT2_FS_SECURITY is not set
++CONFIG_EXT2_FS_POSIX_ACL=y
++CONFIG_EXT2_FS_SECURITY=y
+ # CONFIG_EXT2_FS_XIP is not set
+ CONFIG_EXT3_FS=y
+ CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
++CONFIG_EXT3_FS_POSIX_ACL=y
++CONFIG_EXT3_FS_SECURITY=y
++# CONFIG_EXT4DEV_FS is not set
+ CONFIG_JBD=y
+ # CONFIG_JBD_DEBUG is not set
+ CONFIG_FS_MBCACHE=y
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+-
+-#
+-# XFS support
+-#
++CONFIG_FS_POSIX_ACL=y
+ # CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
+ # CONFIG_MINIX_FS is not set
+ # CONFIG_ROMFS_FS is not set
+-# CONFIG_QUOTA is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++CONFIG_QUOTA=y
++# CONFIG_QFMT_V1 is not set
++CONFIG_QFMT_V2=y
++CONFIG_QUOTACTL=y
+ CONFIG_DNOTIFY=y
+-CONFIG_AUTOFS_FS=y
++# CONFIG_AUTOFS_FS is not set
+ CONFIG_AUTOFS4_FS=y
++# CONFIG_FUSE_FS is not set
+ 
+ #
+ # CD-ROM/DVD Filesystems
+@@ -643,25 +1019,40 @@
+ CONFIG_MSDOS_FS=y
+ CONFIG_VFAT_FS=y
+ CONFIG_FAT_DEFAULT_CODEPAGE=437
+-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+ # CONFIG_NTFS_FS is not set
+ 
+ #
+ # Pseudo filesystems
+ #
+ CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
+ CONFIG_SYSFS=y
+-CONFIG_DEVPTS_FS_XATTR=y
+-# CONFIG_DEVPTS_FS_SECURITY is not set
+ CONFIG_TMPFS=y
+-# CONFIG_TMPFS_XATTR is not set
++# CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+ CONFIG_RAMFS=y
++CONFIG_CONFIGFS_FS=y
+ 
+ #
+ # Miscellaneous filesystems
+ #
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
+ # CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
+ # CONFIG_CRAMFS is not set
+ # CONFIG_VXFS_FS is not set
+ # CONFIG_HPFS_FS is not set
+@@ -675,16 +1066,23 @@
+ CONFIG_NFS_FS=y
+ CONFIG_NFS_V3=y
+ # CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++# CONFIG_NFS_DIRECTIO is not set
+ # CONFIG_NFSD is not set
+ CONFIG_ROOT_NFS=y
+ CONFIG_LOCKD=y
+ CONFIG_LOCKD_V4=y
+ CONFIG_NFS_COMMON=y
+ CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
+ # CONFIG_SMB_FS is not set
+ # CONFIG_CIFS is not set
+ # CONFIG_NCP_FS is not set
+ # CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++# CONFIG_9P_FS is not set
+ 
+ #
+ # Partition Types
+@@ -734,26 +1132,51 @@
+ # CONFIG_NLS_ISO8859_15 is not set
+ # CONFIG_NLS_KOI8_R is not set
+ # CONFIG_NLS_KOI8_U is not set
+-# CONFIG_NLS_UTF8 is not set
++CONFIG_NLS_UTF8=y
+ 
+ #
++# Distributed Lock Manager
++#
++# CONFIG_DLM is not set
++
++#
++# Profiling support
++#
++# CONFIG_PROFILING is not set
++
++#
+ # Kernel hacking
+ #
+ # CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
+ CONFIG_DEBUG_KERNEL=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_LOG_BUF_SHIFT=17
++CONFIG_DETECT_SOFTLOCKUP=y
+ # CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
+ # CONFIG_DEBUG_SLAB is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++CONFIG_DEBUG_SPINLOCK=y
++# CONFIG_DEBUG_MUTEXES is not set
++CONFIG_DEBUG_SPINLOCK_SLEEP=y
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+ # CONFIG_DEBUG_KOBJECT is not set
+ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_FS is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
+ CONFIG_FRAME_POINTER=y
+-CONFIG_DEBUG_USER=y
+-CONFIG_DEBUG_ERRORS=y
++CONFIG_FORCED_INLINING=y
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_DEBUG_USER is not set
++# CONFIG_DEBUG_ERRORS is not set
+ CONFIG_DEBUG_LL=y
+ # CONFIG_DEBUG_ICEDCC is not set
+ 
+@@ -766,7 +1189,43 @@
+ #
+ # Cryptographic options
+ #
+-# CONFIG_CRYPTO is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++CONFIG_CRYPTO_HASH=m
++CONFIG_CRYPTO_MANAGER=y
++CONFIG_CRYPTO_HMAC=m
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_LRW is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
+ 
+ #
+ # Hardware crypto devices
+@@ -775,6 +1234,14 @@
+ #
+ # Library routines
+ #
++CONFIG_BITREVERSE=y
+ # CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
+ CONFIG_CRC32=y
+ # CONFIG_LIBCRC32C is not set
++CONFIG_AUDIT_GENERIC=y
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
+Index: linux-2.6.22.1/arch/arm/configs/at91sam9260ek_defconfig
+===================================================================
+--- linux-2.6.22.1/arch/arm/configs/at91sam9260ek_defconfig	(revision 1)
++++ linux-2.6.22.1/arch/arm/configs/at91sam9260ek_defconfig	(arbetskopia)
+@@ -1,18 +1,24 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.19-rc6
+-# Fri Nov 17 18:42:21 2006
++# Linux kernel version: 2.6.21
++# Mon May  7 11:42:02 2007
+ #
+ CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
+ # CONFIG_GENERIC_TIME is not set
+ CONFIG_MMU=y
++# CONFIG_NO_IOPORT is not set
+ CONFIG_GENERIC_HARDIRQS=y
+ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ CONFIG_HARDIRQS_SW_RESEND=y
+ CONFIG_GENERIC_IRQ_PROBE=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+ CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_ZONE_DMA=y
+ CONFIG_VECTORS_BASE=0xffff0000
+ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+ 
+@@ -31,13 +37,16 @@
+ # CONFIG_SWAP is not set
+ CONFIG_SYSVIPC=y
+ # CONFIG_IPC_NS is not set
++CONFIG_SYSVIPC_SYSCTL=y
+ # CONFIG_POSIX_MQUEUE is not set
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+ # CONFIG_UTS_NS is not set
+ # CONFIG_AUDIT is not set
+ # CONFIG_IKCONFIG is not set
++CONFIG_SYSFS_DEPRECATED=y
+ # CONFIG_RELAY is not set
++CONFIG_BLK_DEV_INITRD=y
+ CONFIG_INITRAMFS_SOURCE=""
+ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+ CONFIG_SYSCTL=y
+@@ -76,7 +85,9 @@
+ # Block layer
+ #
+ CONFIG_BLOCK=y
++# CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
+ 
+ #
+ # IO Schedulers
+@@ -110,10 +121,12 @@
+ # CONFIG_ARCH_IMX is not set
+ # CONFIG_ARCH_IOP32X is not set
+ # CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IOP13XX is not set
+ # CONFIG_ARCH_IXP4XX is not set
+ # CONFIG_ARCH_IXP2000 is not set
+ # CONFIG_ARCH_IXP23XX is not set
+ # CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_NS9XXX is not set
+ # CONFIG_ARCH_PNX4008 is not set
+ # CONFIG_ARCH_PXA is not set
+ # CONFIG_ARCH_RPC is not set
+@@ -129,21 +142,29 @@
+ # CONFIG_ARCH_AT91RM9200 is not set
+ CONFIG_ARCH_AT91SAM9260=y
+ # CONFIG_ARCH_AT91SAM9261 is not set
++# CONFIG_ARCH_AT91SAM9263 is not set
+ 
+ #
+-# AT91SAM9260 Board Type
++# AT91SAM9260 Variants
+ #
++# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
++
++#
++# AT91SAM9260 / AT91SAM9XE Board Type
++#
+ CONFIG_MACH_AT91SAM9260EK=y
+ 
+ #
+ # AT91 Board Options
+ #
++# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+ # CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+ 
+ #
+ # AT91 Feature Selections
+ #
+ # CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
++# CONFIG_ATMEL_TCLIB is not set
+ 
+ #
+ # Processor Type
+@@ -166,6 +187,7 @@
+ # CONFIG_CPU_DCACHE_DISABLE is not set
+ # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+ # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++# CONFIG_OUTER_CACHE is not set
+ 
+ #
+ # Bus support
+@@ -193,6 +215,7 @@
+ # CONFIG_SPARSEMEM_STATIC is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4096
+ # CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
+ # CONFIG_LEDS is not set
+ CONFIG_ALIGNMENT_TRAP=y
+ 
+@@ -203,6 +226,7 @@
+ CONFIG_ZBOOT_ROM_BSS=0x0
+ CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+ # CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
+ 
+ #
+ # Floating point emulation
+@@ -228,7 +252,6 @@
+ # Power management options
+ #
+ # CONFIG_PM is not set
+-# CONFIG_APM is not set
+ 
+ #
+ # Networking
+@@ -242,9 +265,6 @@
+ CONFIG_PACKET=y
+ # CONFIG_PACKET_MMAP is not set
+ CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-# CONFIG_XFRM_USER is not set
+-# CONFIG_XFRM_SUB_POLICY is not set
+ # CONFIG_NET_KEY is not set
+ CONFIG_INET=y
+ # CONFIG_IP_MULTICAST is not set
+@@ -263,14 +283,15 @@
+ # CONFIG_INET_IPCOMP is not set
+ # CONFIG_INET_XFRM_TUNNEL is not set
+ # CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
+ CONFIG_INET_DIAG=y
+ CONFIG_INET_TCP_DIAG=y
+ # CONFIG_TCP_CONG_ADVANCED is not set
+ CONFIG_TCP_CONG_CUBIC=y
+ CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
+ # CONFIG_IPV6 is not set
+ # CONFIG_INET6_XFRM_TUNNEL is not set
+ # CONFIG_INET6_TUNNEL is not set
+@@ -328,6 +349,7 @@
+ CONFIG_PREVENT_FIRMWARE_BUILD=y
+ # CONFIG_FW_LOADER is not set
+ # CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+ 
+ #
+@@ -348,6 +370,7 @@
+ #
+ # Plug and Play support
+ #
++# CONFIG_PNPACPI is not set
+ 
+ #
+ # Block devices
+@@ -360,7 +383,6 @@
+ CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=8192
+ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+-CONFIG_BLK_DEV_INITRD=y
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+ 
+@@ -369,6 +391,7 @@
+ #
+ # CONFIG_RAID_ATTRS is not set
+ CONFIG_SCSI=y
++# CONFIG_SCSI_TGT is not set
+ # CONFIG_SCSI_NETLINK is not set
+ CONFIG_SCSI_PROC_FS=y
+ 
+@@ -388,6 +411,7 @@
+ CONFIG_SCSI_MULTI_LUN=y
+ # CONFIG_SCSI_CONSTANTS is not set
+ # CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
+ 
+ #
+ # SCSI Transports
+@@ -405,6 +429,11 @@
+ # CONFIG_SCSI_DEBUG is not set
+ 
+ #
++# Serial ATA (prod) and Parallel ATA (experimental) drivers
++#
++# CONFIG_ATA is not set
++
++#
+ # Multi-device support (RAID and LVM)
+ #
+ # CONFIG_MD is not set
+@@ -425,7 +454,51 @@
+ #
+ # Network device support
+ #
+-# CONFIG_NETDEVICES is not set
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++
++#
++# PHY device support
++#
++# CONFIG_PHYLIB is not set
++
++#
++# Ethernet (10 or 100Mbit)
++#
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++CONFIG_MACB=y
++# CONFIG_SMC91X is not set
++# CONFIG_DM9000 is not set
++
++#
++# Ethernet (1000 Mbit)
++#
++
++#
++# Ethernet (10000 Mbit)
++#
++
++#
++# Token Ring devices
++#
++
++#
++# Wireless LAN (non-hamradio)
++#
++# CONFIG_NET_RADIO is not set
++
++#
++# Wan interfaces
++#
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
+ 
+@@ -517,10 +590,6 @@
+ # CONFIG_NVRAM is not set
+ # CONFIG_DTLK is not set
+ # CONFIG_R3964 is not set
+-
+-#
+-# Ftape, the floppy tape device driver
+-#
+ # CONFIG_RAW_DRIVER is not set
+ 
+ #
+@@ -553,9 +622,13 @@
+ #
+ # Misc devices
+ #
+-# CONFIG_TIFM_CORE is not set
+ 
+ #
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
+ # LED devices
+ #
+ # CONFIG_NEW_LEDS is not set
+@@ -582,7 +655,7 @@
+ #
+ # Graphics support
+ #
+-# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+ # CONFIG_FB is not set
+ 
+ #
+@@ -590,7 +663,6 @@
+ #
+ # CONFIG_VGA_CONSOLE is not set
+ CONFIG_DUMMY_CONSOLE=y
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+ 
+ #
+ # Sound
+@@ -598,6 +670,12 @@
+ # CONFIG_SOUND is not set
+ 
+ #
++# HID Devices
++#
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++
++#
+ # USB support
+ #
+ CONFIG_USB_ARCH_HAS_HCD=y
+@@ -610,7 +688,6 @@
+ # Miscellaneous USB options
+ #
+ CONFIG_USB_DEVICEFS=y
+-# CONFIG_USB_BANDWIDTH is not set
+ # CONFIG_USB_DYNAMIC_MINORS is not set
+ # CONFIG_USB_OTG is not set
+ 
+@@ -619,7 +696,8 @@
+ #
+ # CONFIG_USB_ISP116X_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
+-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+ # CONFIG_USB_SL811_HCD is not set
+ 
+@@ -671,6 +749,7 @@
+ # CONFIG_USB_ATI_REMOTE2 is not set
+ # CONFIG_USB_KEYSPAN_REMOTE is not set
+ # CONFIG_USB_APPLETOUCH is not set
++# CONFIG_USB_GTCO is not set
+ 
+ #
+ # USB Imaging devices
+@@ -708,6 +787,7 @@
+ # CONFIG_USB_RIO500 is not set
+ # CONFIG_USB_LEGOTOWER is not set
+ # CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
+ # CONFIG_USB_LED is not set
+ # CONFIG_USB_CYPRESS_CY7C63 is not set
+ # CONFIG_USB_CYTHERM is not set
+@@ -717,6 +797,7 @@
+ # CONFIG_USB_APPLEDISPLAY is not set
+ # CONFIG_USB_LD is not set
+ # CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
+ # CONFIG_USB_TEST is not set
+ 
+ #
+@@ -889,6 +970,11 @@
+ # CONFIG_NLS_UTF8 is not set
+ 
+ #
++# Distributed Lock Manager
++#
++# CONFIG_DLM is not set
++
++#
+ # Profiling support
+ #
+ # CONFIG_PROFILING is not set
+@@ -900,28 +986,30 @@
+ CONFIG_ENABLE_MUST_CHECK=y
+ # CONFIG_MAGIC_SYSRQ is not set
+ # CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
+ CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_LOG_BUF_SHIFT=14
+ CONFIG_DETECT_SOFTLOCKUP=y
+ # CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
+ # CONFIG_DEBUG_SLAB is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
+ # CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_RWSEMS is not set
+ # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+ # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+ # CONFIG_DEBUG_KOBJECT is not set
+ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_FS is not set
+ # CONFIG_DEBUG_VM is not set
+ # CONFIG_DEBUG_LIST is not set
+ CONFIG_FRAME_POINTER=y
+ CONFIG_FORCED_INLINING=y
+-# CONFIG_HEADERS_CHECK is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
+ CONFIG_DEBUG_USER=y
+ # CONFIG_DEBUG_ERRORS is not set
+ CONFIG_DEBUG_LL=y
+@@ -941,9 +1029,12 @@
+ #
+ # Library routines
+ #
++CONFIG_BITREVERSE=y
+ # CONFIG_CRC_CCITT is not set
+ # CONFIG_CRC16 is not set
+ CONFIG_CRC32=y
+ # CONFIG_LIBCRC32C is not set
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
+Index: linux-2.6.22.1/arch/arm/configs/at91sam9261ek_defconfig
+===================================================================
+--- linux-2.6.22.1/arch/arm/configs/at91sam9261ek_defconfig	(revision 1)
++++ linux-2.6.22.1/arch/arm/configs/at91sam9261ek_defconfig	(arbetskopia)
+@@ -1,18 +1,24 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.19-rc6
+-# Fri Nov 17 18:00:38 2006
++# Linux kernel version: 2.6.21
++# Mon May  7 11:42:30 2007
+ #
+ CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
+ # CONFIG_GENERIC_TIME is not set
+ CONFIG_MMU=y
++# CONFIG_NO_IOPORT is not set
+ CONFIG_GENERIC_HARDIRQS=y
+ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ CONFIG_HARDIRQS_SW_RESEND=y
+ CONFIG_GENERIC_IRQ_PROBE=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+ CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_ZONE_DMA=y
+ CONFIG_VECTORS_BASE=0xffff0000
+ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+ 
+@@ -31,13 +37,16 @@
+ # CONFIG_SWAP is not set
+ CONFIG_SYSVIPC=y
+ # CONFIG_IPC_NS is not set
++CONFIG_SYSVIPC_SYSCTL=y
+ # CONFIG_POSIX_MQUEUE is not set
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+ # CONFIG_UTS_NS is not set
+ # CONFIG_AUDIT is not set
+ # CONFIG_IKCONFIG is not set
++CONFIG_SYSFS_DEPRECATED=y
+ # CONFIG_RELAY is not set
++CONFIG_BLK_DEV_INITRD=y
+ CONFIG_INITRAMFS_SOURCE=""
+ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+ CONFIG_SYSCTL=y
+@@ -76,7 +85,9 @@
+ # Block layer
+ #
+ CONFIG_BLOCK=y
++# CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
+ 
+ #
+ # IO Schedulers
+@@ -110,10 +121,12 @@
+ # CONFIG_ARCH_IMX is not set
+ # CONFIG_ARCH_IOP32X is not set
+ # CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IOP13XX is not set
+ # CONFIG_ARCH_IXP4XX is not set
+ # CONFIG_ARCH_IXP2000 is not set
+ # CONFIG_ARCH_IXP23XX is not set
+ # CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_NS9XXX is not set
+ # CONFIG_ARCH_PNX4008 is not set
+ # CONFIG_ARCH_PXA is not set
+ # CONFIG_ARCH_RPC is not set
+@@ -129,6 +142,7 @@
+ # CONFIG_ARCH_AT91RM9200 is not set
+ # CONFIG_ARCH_AT91SAM9260 is not set
+ CONFIG_ARCH_AT91SAM9261=y
++# CONFIG_ARCH_AT91SAM9263 is not set
+ 
+ #
+ # AT91SAM9261 Board Type
+@@ -138,12 +152,14 @@
+ #
+ # AT91 Board Options
+ #
++# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+ # CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+ 
+ #
+ # AT91 Feature Selections
+ #
+ # CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
++# CONFIG_ATMEL_TCLIB is not set
+ 
+ #
+ # Processor Type
+@@ -166,6 +182,7 @@
+ # CONFIG_CPU_DCACHE_DISABLE is not set
+ # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+ # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++# CONFIG_OUTER_CACHE is not set
+ 
+ #
+ # Bus support
+@@ -193,6 +210,7 @@
+ # CONFIG_SPARSEMEM_STATIC is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4096
+ # CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
+ # CONFIG_LEDS is not set
+ CONFIG_ALIGNMENT_TRAP=y
+ 
+@@ -203,6 +221,7 @@
+ CONFIG_ZBOOT_ROM_BSS=0x0
+ CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+ # CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
+ 
+ #
+ # Floating point emulation
+@@ -228,7 +247,6 @@
+ # Power management options
+ #
+ # CONFIG_PM is not set
+-# CONFIG_APM is not set
+ 
+ #
+ # Networking
+@@ -245,6 +263,7 @@
+ CONFIG_XFRM=y
+ # CONFIG_XFRM_USER is not set
+ # CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
+ # CONFIG_NET_KEY is not set
+ CONFIG_INET=y
+ # CONFIG_IP_MULTICAST is not set
+@@ -271,6 +290,7 @@
+ # CONFIG_TCP_CONG_ADVANCED is not set
+ CONFIG_TCP_CONG_CUBIC=y
+ CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
+ # CONFIG_IPV6 is not set
+ # CONFIG_INET6_XFRM_TUNNEL is not set
+ # CONFIG_INET6_TUNNEL is not set
+@@ -328,6 +348,7 @@
+ CONFIG_PREVENT_FIRMWARE_BUILD=y
+ # CONFIG_FW_LOADER is not set
+ # CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+ 
+ #
+@@ -350,6 +371,7 @@
+ # User Modules And Translation Layers
+ #
+ # CONFIG_MTD_CHAR is not set
++CONFIG_MTD_BLKDEVS=y
+ CONFIG_MTD_BLOCK=y
+ # CONFIG_FTL is not set
+ # CONFIG_NFTL is not set
+@@ -386,6 +408,8 @@
+ #
+ # Self-contained MTD device drivers
+ #
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
+ # CONFIG_MTD_SLRAM is not set
+ # CONFIG_MTD_PHRAM is not set
+ # CONFIG_MTD_MTDRAM is not set
+@@ -422,6 +446,7 @@
+ #
+ # Plug and Play support
+ #
++# CONFIG_PNPACPI is not set
+ 
+ #
+ # Block devices
+@@ -434,7 +459,6 @@
+ CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=8192
+ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+-CONFIG_BLK_DEV_INITRD=y
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+ 
+@@ -443,6 +467,7 @@
+ #
+ # CONFIG_RAID_ATTRS is not set
+ CONFIG_SCSI=y
++# CONFIG_SCSI_TGT is not set
+ # CONFIG_SCSI_NETLINK is not set
+ CONFIG_SCSI_PROC_FS=y
+ 
+@@ -462,6 +487,7 @@
+ CONFIG_SCSI_MULTI_LUN=y
+ # CONFIG_SCSI_CONSTANTS is not set
+ # CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
+ 
+ #
+ # SCSI Transports
+@@ -479,6 +505,11 @@
+ # CONFIG_SCSI_DEBUG is not set
+ 
+ #
++# Serial ATA (prod) and Parallel ATA (experimental) drivers
++#
++# CONFIG_ATA is not set
++
++#
+ # Multi-device support (RAID and LVM)
+ #
+ # CONFIG_MD is not set
+@@ -575,7 +606,16 @@
+ # CONFIG_INPUT_KEYBOARD is not set
+ # CONFIG_INPUT_MOUSE is not set
+ # CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++CONFIG_TOUCHSCREEN_ADS7846=y
++# CONFIG_TOUCHSCREEN_GUNZE is not set
++# CONFIG_TOUCHSCREEN_ELO is not set
++# CONFIG_TOUCHSCREEN_MTOUCH is not set
++# CONFIG_TOUCHSCREEN_MK712 is not set
++# CONFIG_TOUCHSCREEN_PENMOUNT is not set
++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
++# CONFIG_TOUCHSCREEN_UCB1400 is not set
+ # CONFIG_INPUT_MISC is not set
+ 
+ #
+@@ -634,10 +674,6 @@
+ # CONFIG_NVRAM is not set
+ # CONFIG_DTLK is not set
+ # CONFIG_R3964 is not set
+-
+-#
+-# Ftape, the floppy tape device driver
+-#
+ # CONFIG_RAW_DRIVER is not set
+ 
+ #
+@@ -662,6 +698,7 @@
+ # I2C Hardware Bus support
+ #
+ CONFIG_I2C_AT91=y
++CONFIG_I2C_AT91_CLOCKRATE=100000
+ # CONFIG_I2C_OCORES is not set
+ # CONFIG_I2C_PARPORT_LIGHT is not set
+ # CONFIG_I2C_STUB is not set
+@@ -686,10 +723,22 @@
+ #
+ # SPI support
+ #
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
+ 
+ #
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++
++#
+ # Dallas's 1-wire bus
+ #
+ # CONFIG_W1 is not set
+@@ -703,9 +752,13 @@
+ #
+ # Misc devices
+ #
+-# CONFIG_TIFM_CORE is not set
+ 
+ #
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
+ # LED devices
+ #
+ # CONFIG_NEW_LEDS is not set
+@@ -732,7 +785,7 @@
+ #
+ # Graphics support
+ #
+-# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+ # CONFIG_FB is not set
+ 
+ #
+@@ -740,7 +793,6 @@
+ #
+ # CONFIG_VGA_CONSOLE is not set
+ CONFIG_DUMMY_CONSOLE=y
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+ 
+ #
+ # Sound
+@@ -748,6 +800,12 @@
+ # CONFIG_SOUND is not set
+ 
+ #
++# HID Devices
++#
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++
++#
+ # USB support
+ #
+ CONFIG_USB_ARCH_HAS_HCD=y
+@@ -760,7 +818,6 @@
+ # Miscellaneous USB options
+ #
+ CONFIG_USB_DEVICEFS=y
+-# CONFIG_USB_BANDWIDTH is not set
+ # CONFIG_USB_DYNAMIC_MINORS is not set
+ # CONFIG_USB_OTG is not set
+ 
+@@ -769,7 +826,8 @@
+ #
+ # CONFIG_USB_ISP116X_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
+-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+ # CONFIG_USB_SL811_HCD is not set
+ 
+@@ -821,6 +879,7 @@
+ # CONFIG_USB_ATI_REMOTE2 is not set
+ # CONFIG_USB_KEYSPAN_REMOTE is not set
+ # CONFIG_USB_APPLETOUCH is not set
++# CONFIG_USB_GTCO is not set
+ 
+ #
+ # USB Imaging devices
+@@ -858,6 +917,7 @@
+ # CONFIG_USB_RIO500 is not set
+ # CONFIG_USB_LEGOTOWER is not set
+ # CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
+ # CONFIG_USB_LED is not set
+ # CONFIG_USB_CYPRESS_CY7C63 is not set
+ # CONFIG_USB_CYTHERM is not set
+@@ -867,6 +927,7 @@
+ # CONFIG_USB_APPLEDISPLAY is not set
+ # CONFIG_USB_LD is not set
+ # CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
+ # CONFIG_USB_TEST is not set
+ 
+ #
+@@ -903,7 +964,6 @@
+ # CONFIG_MMC_DEBUG is not set
+ CONFIG_MMC_BLOCK=y
+ CONFIG_MMC_AT91=m
+-# CONFIG_MMC_TIFM_SD is not set
+ 
+ #
+ # Real Time Clock
+@@ -973,7 +1033,6 @@
+ # CONFIG_BEFS_FS is not set
+ # CONFIG_BFS_FS is not set
+ # CONFIG_EFS_FS is not set
+-# CONFIG_JFFS_FS is not set
+ # CONFIG_JFFS2_FS is not set
+ CONFIG_CRAMFS=y
+ # CONFIG_VXFS_FS is not set
+@@ -1045,6 +1104,11 @@
+ # CONFIG_NLS_UTF8 is not set
+ 
+ #
++# Distributed Lock Manager
++#
++# CONFIG_DLM is not set
++
++#
+ # Profiling support
+ #
+ # CONFIG_PROFILING is not set
+@@ -1056,28 +1120,30 @@
+ CONFIG_ENABLE_MUST_CHECK=y
+ # CONFIG_MAGIC_SYSRQ is not set
+ # CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
+ CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_LOG_BUF_SHIFT=14
+ CONFIG_DETECT_SOFTLOCKUP=y
+ # CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
+ # CONFIG_DEBUG_SLAB is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
+ # CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_RWSEMS is not set
+ # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+ # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+ # CONFIG_DEBUG_KOBJECT is not set
+ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_FS is not set
+ # CONFIG_DEBUG_VM is not set
+ # CONFIG_DEBUG_LIST is not set
+ CONFIG_FRAME_POINTER=y
+ CONFIG_FORCED_INLINING=y
+-# CONFIG_HEADERS_CHECK is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
+ CONFIG_DEBUG_USER=y
+ # CONFIG_DEBUG_ERRORS is not set
+ CONFIG_DEBUG_LL=y
+@@ -1097,9 +1163,12 @@
+ #
+ # Library routines
+ #
++CONFIG_BITREVERSE=y
+ # CONFIG_CRC_CCITT is not set
+ # CONFIG_CRC16 is not set
+ CONFIG_CRC32=y
+ # CONFIG_LIBCRC32C is not set
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
+Index: linux-2.6.22.1/arch/arm/configs/at91sam9263ek_defconfig
+===================================================================
+--- linux-2.6.22.1/arch/arm/configs/at91sam9263ek_defconfig	(revision 1)
++++ linux-2.6.22.1/arch/arm/configs/at91sam9263ek_defconfig	(arbetskopia)
+@@ -1,11 +1,14 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.20-rc1
+-# Mon Jan  8 16:06:54 2007
++# Linux kernel version: 2.6.21
++# Mon May  7 11:42:49 2007
+ #
+ CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
+ # CONFIG_GENERIC_TIME is not set
+ CONFIG_MMU=y
++# CONFIG_NO_IOPORT is not set
+ CONFIG_GENERIC_HARDIRQS=y
+ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ CONFIG_HARDIRQS_SW_RESEND=y
+@@ -15,6 +18,7 @@
+ # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+ CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_ZONE_DMA=y
+ CONFIG_VECTORS_BASE=0xffff0000
+ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+ 
+@@ -33,6 +37,7 @@
+ # CONFIG_SWAP is not set
+ CONFIG_SYSVIPC=y
+ # CONFIG_IPC_NS is not set
++CONFIG_SYSVIPC_SYSCTL=y
+ # CONFIG_POSIX_MQUEUE is not set
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+@@ -41,6 +46,7 @@
+ # CONFIG_IKCONFIG is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ # CONFIG_RELAY is not set
++CONFIG_BLK_DEV_INITRD=y
+ CONFIG_INITRAMFS_SOURCE=""
+ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+ CONFIG_SYSCTL=y
+@@ -120,6 +126,7 @@
+ # CONFIG_ARCH_IXP2000 is not set
+ # CONFIG_ARCH_IXP23XX is not set
+ # CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_NS9XXX is not set
+ # CONFIG_ARCH_PNX4008 is not set
+ # CONFIG_ARCH_PXA is not set
+ # CONFIG_ARCH_RPC is not set
+@@ -152,6 +159,7 @@
+ # AT91 Feature Selections
+ #
+ # CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
++# CONFIG_ATMEL_TCLIB is not set
+ 
+ #
+ # Processor Type
+@@ -174,6 +182,7 @@
+ # CONFIG_CPU_DCACHE_DISABLE is not set
+ # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+ # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++# CONFIG_OUTER_CACHE is not set
+ 
+ #
+ # Bus support
+@@ -201,6 +210,7 @@
+ # CONFIG_SPARSEMEM_STATIC is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4096
+ # CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
+ # CONFIG_LEDS is not set
+ CONFIG_ALIGNMENT_TRAP=y
+ 
+@@ -211,6 +221,7 @@
+ CONFIG_ZBOOT_ROM_BSS=0x0
+ CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+ # CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
+ 
+ #
+ # Floating point emulation
+@@ -236,7 +247,6 @@
+ # Power management options
+ #
+ # CONFIG_PM is not set
+-# CONFIG_APM is not set
+ 
+ #
+ # Networking
+@@ -333,6 +343,7 @@
+ CONFIG_PREVENT_FIRMWARE_BUILD=y
+ # CONFIG_FW_LOADER is not set
+ # CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+ 
+ #
+@@ -430,6 +441,7 @@
+ #
+ # Plug and Play support
+ #
++# CONFIG_PNPACPI is not set
+ 
+ #
+ # Block devices
+@@ -443,7 +455,6 @@
+ CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=8192
+ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+-CONFIG_BLK_DEV_INITRD=y
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+ 
+@@ -531,6 +542,7 @@
+ #
+ CONFIG_NET_ETHERNET=y
+ CONFIG_MII=y
++CONFIG_MACB=y
+ # CONFIG_SMC91X is not set
+ # CONFIG_DM9000 is not set
+ 
+@@ -685,6 +697,7 @@
+ # I2C Hardware Bus support
+ #
+ CONFIG_I2C_AT91=y
++CONFIG_I2C_AT91_CLOCKRATE=100000
+ # CONFIG_I2C_OCORES is not set
+ # CONFIG_I2C_PARPORT_LIGHT is not set
+ # CONFIG_I2C_STUB is not set
+@@ -722,6 +735,7 @@
+ #
+ # SPI Protocol Masters
+ #
++# CONFIG_SPI_AT25 is not set
+ 
+ #
+ # Dallas's 1-wire bus
+@@ -737,9 +751,13 @@
+ #
+ # Misc devices
+ #
+-# CONFIG_TIFM_CORE is not set
+ 
+ #
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
+ # LED devices
+ #
+ # CONFIG_NEW_LEDS is not set
+@@ -766,15 +784,23 @@
+ #
+ # Graphics support
+ #
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++CONFIG_FB=y
+ # CONFIG_FIRMWARE_EDID is not set
+-CONFIG_FB=y
++# CONFIG_FB_DDC is not set
+ # CONFIG_FB_CFB_FILLRECT is not set
+ # CONFIG_FB_CFB_COPYAREA is not set
+ # CONFIG_FB_CFB_IMAGEBLIT is not set
++# CONFIG_FB_SVGALIB is not set
+ # CONFIG_FB_MACMODES is not set
+ # CONFIG_FB_BACKLIGHT is not set
+ # CONFIG_FB_MODE_HELPERS is not set
+ # CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D15605 is not set
+ # CONFIG_FB_S1D13XXX is not set
+ # CONFIG_FB_VIRTUAL is not set
+ 
+@@ -789,7 +815,6 @@
+ # Logo configuration
+ #
+ # CONFIG_LOGO is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+ 
+ #
+ # Sound
+@@ -800,6 +825,7 @@
+ # HID Devices
+ #
+ CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
+ 
+ #
+ # USB support
+@@ -814,9 +840,7 @@
+ # Miscellaneous USB options
+ #
+ CONFIG_USB_DEVICEFS=y
+-# CONFIG_USB_BANDWIDTH is not set
+ # CONFIG_USB_DYNAMIC_MINORS is not set
+-# CONFIG_USB_MULTITHREAD_PROBE is not set
+ # CONFIG_USB_OTG is not set
+ 
+ #
+@@ -824,7 +848,8 @@
+ #
+ # CONFIG_USB_ISP116X_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
+-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+ # CONFIG_USB_SL811_HCD is not set
+ 
+@@ -877,6 +902,7 @@
+ # CONFIG_USB_ATI_REMOTE2 is not set
+ # CONFIG_USB_KEYSPAN_REMOTE is not set
+ # CONFIG_USB_APPLETOUCH is not set
++# CONFIG_USB_GTCO is not set
+ 
+ #
+ # USB Imaging devices
+@@ -914,6 +940,7 @@
+ # CONFIG_USB_RIO500 is not set
+ # CONFIG_USB_LEGOTOWER is not set
+ # CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
+ # CONFIG_USB_LED is not set
+ # CONFIG_USB_CYPRESS_CY7C63 is not set
+ # CONFIG_USB_CYTHERM is not set
+@@ -923,6 +950,7 @@
+ # CONFIG_USB_APPLEDISPLAY is not set
+ # CONFIG_USB_LD is not set
+ # CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
+ # CONFIG_USB_TEST is not set
+ 
+ #
+@@ -959,7 +987,6 @@
+ # CONFIG_MMC_DEBUG is not set
+ CONFIG_MMC_BLOCK=y
+ CONFIG_MMC_AT91=m
+-# CONFIG_MMC_TIFM_SD is not set
+ 
+ #
+ # Real Time Clock
+@@ -1136,15 +1163,16 @@
+ # CONFIG_DEBUG_FS is not set
+ # CONFIG_HEADERS_CHECK is not set
+ CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_LOG_BUF_SHIFT=14
+ CONFIG_DETECT_SOFTLOCKUP=y
+ # CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
+ # CONFIG_DEBUG_SLAB is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
+ # CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_RWSEMS is not set
+ # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+ # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+ # CONFIG_DEBUG_KOBJECT is not set
+@@ -1155,6 +1183,7 @@
+ CONFIG_FRAME_POINTER=y
+ CONFIG_FORCED_INLINING=y
+ # CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
+ CONFIG_DEBUG_USER=y
+ # CONFIG_DEBUG_ERRORS is not set
+ CONFIG_DEBUG_LL=y
+@@ -1180,5 +1209,7 @@
+ CONFIG_CRC32=y
+ # CONFIG_LIBCRC32C is not set
+ CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
+ CONFIG_PLIST=y
+-CONFIG_IOMAP_COPY=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
+Index: linux-2.6.22.1/arch/avr32/kernel/setup.c
+===================================================================
+--- linux-2.6.22.1/arch/avr32/kernel/setup.c	(revision 1)
++++ linux-2.6.22.1/arch/avr32/kernel/setup.c	(arbetskopia)
+@@ -313,7 +313,7 @@
+ 
+ static int __init parse_tag_rdimg(struct tag *tag)
+ {
+-#ifdef CONFIG_INITRD
++#ifdef CONFIG_BLK_DEV_INITRD
+ 	struct tag_mem_range *mem = &tag->u.mem_range;
+ 	int ret;
+ 
+@@ -323,7 +323,7 @@
+ 		return 0;
+ 	}
+ 
+-	ret = add_reserved_region(mem->start, mem->start + mem->size - 1,
++	ret = add_reserved_region(mem->addr, mem->addr + mem->size - 1,
+ 				  "initrd");
+ 	if (ret) {
+ 		printk(KERN_WARNING
+Index: linux-2.6.22.1/arch/avr32/kernel/dma-controller.c
+===================================================================
+--- linux-2.6.22.1/arch/avr32/kernel/dma-controller.c	(revision 0)
++++ linux-2.6.22.1/arch/avr32/kernel/dma-controller.c	(revision 0)
+@@ -0,0 +1,34 @@
++/*
++ * Preliminary DMA controller framework for AVR32
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <asm/dma-controller.h>
++
++static LIST_HEAD(controllers);
++
++int register_dma_controller(struct dma_controller *dmac)
++{
++	static int next_id;
++
++	dmac->id = next_id++;
++	list_add_tail(&dmac->list, &controllers);
++
++	return 0;
++}
++EXPORT_SYMBOL(register_dma_controller);
++
++struct dma_controller *find_dma_controller(int id)
++{
++	struct dma_controller *dmac;
++
++	list_for_each_entry(dmac, &controllers, list)
++		if (dmac->id == id)
++			return dmac;
++	return NULL;
++}
++EXPORT_SYMBOL(find_dma_controller);
+Index: linux-2.6.22.1/arch/avr32/kernel/Makefile
+===================================================================
+--- linux-2.6.22.1/arch/avr32/kernel/Makefile	(revision 1)
++++ linux-2.6.22.1/arch/avr32/kernel/Makefile	(arbetskopia)
+@@ -9,6 +9,7 @@
+ obj-y				+= setup.o traps.o semaphore.o ptrace.o
+ obj-y				+= signal.o sys_avr32.o process.o time.o
+ obj-y				+= init_task.o switch_to.o cpu.o
++obj-y				+= dma-controller.o
+ obj-$(CONFIG_MODULES)		+= module.o avr32_ksyms.o
+ obj-$(CONFIG_KPROBES)		+= kprobes.o
+ 
+Index: linux-2.6.22.1/arch/avr32/mach-at32ap/Kconfig
+===================================================================
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/Kconfig	(revision 1)
++++ linux-2.6.22.1/arch/avr32/mach-at32ap/Kconfig	(arbetskopia)
+@@ -26,6 +26,13 @@
+ 
+ endchoice
+ 
++config GPIO_DEV
++	bool "GPIO /dev interface"
++	select CONFIGFS_FS
++	default n
++	help
++	  Say `Y' to enable a /dev interface to the GPIO pins.
++
+ endmenu
+ 
+ endif # PLATFORM_AT32AP
+Index: linux-2.6.22.1/arch/avr32/mach-at32ap/at32ap7000.c
+===================================================================
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/at32ap7000.c	(revision 1)
++++ linux-2.6.22.1/arch/avr32/mach-at32ap/at32ap7000.c	(arbetskopia)
+@@ -17,15 +17,21 @@
+ #include <asm/arch/at32ap7000.h>
+ #include <asm/arch/board.h>
+ #include <asm/arch/portmux.h>
+-#include <asm/arch/sm.h>
+ 
+ #include <video/atmel_lcdc.h>
+ 
+ #include "clock.h"
+ #include "hmatrix.h"
+ #include "pio.h"
+-#include "sm.h"
++#include "pm.h"
+ 
++/*
++ * We can reduce the code size a bit by using a constant here. Since
++ * this file is completely chip-specific, it's safe to not use
++ * ioremap. Generic drivers should of course never do this.
++ */
++#define AT32_PM_BASE	0xfff00000
++
+ #define PBMEM(base)					\
+ 	{						\
+ 		.start		= base,			\
+@@ -88,6 +94,8 @@
+ 	.index		= _index,				\
+ }
+ 
++static DEFINE_SPINLOCK(pm_lock);
++
+ unsigned long at32ap7000_osc_rates[3] = {
+ 	[0] = 32768,
+ 	/* FIXME: these are ATSTK1002-specific */
+@@ -104,11 +112,11 @@
+ {
+ 	unsigned long div, mul, rate;
+ 
+-	if (!(control & SM_BIT(PLLEN)))
++	if (!(control & PM_BIT(PLLEN)))
+ 		return 0;
+ 
+-	div = SM_BFEXT(PLLDIV, control) + 1;
+-	mul = SM_BFEXT(PLLMUL, control) + 1;
++	div = PM_BFEXT(PLLDIV, control) + 1;
++	mul = PM_BFEXT(PLLMUL, control) + 1;
+ 
+ 	rate = clk->parent->get_rate(clk->parent);
+ 	rate = (rate + div / 2) / div;
+@@ -121,7 +129,7 @@
+ {
+ 	u32 control;
+ 
+-	control = sm_readl(&system_manager, PM_PLL0);
++	control = pm_readl(PLL0);
+ 
+ 	return pll_get_rate(clk, control);
+ }
+@@ -130,7 +138,7 @@
+ {
+ 	u32 control;
+ 
+-	control = sm_readl(&system_manager, PM_PLL1);
++	control = pm_readl(PLL1);
+ 
+ 	return pll_get_rate(clk, control);
+ }
+@@ -187,108 +195,139 @@
+ 
+ static void cpu_clk_mode(struct clk *clk, int enabled)
+ {
+-	struct at32_sm *sm = &system_manager;
+ 	unsigned long flags;
+ 	u32 mask;
+ 
+-	spin_lock_irqsave(&sm->lock, flags);
+-	mask = sm_readl(sm, PM_CPU_MASK);
++	spin_lock_irqsave(&pm_lock, flags);
++	mask = pm_readl(CPU_MASK);
+ 	if (enabled)
+ 		mask |= 1 << clk->index;
+ 	else
+ 		mask &= ~(1 << clk->index);
+-	sm_writel(sm, PM_CPU_MASK, mask);
+-	spin_unlock_irqrestore(&sm->lock, flags);
++	pm_writel(CPU_MASK, mask);
++	spin_unlock_irqrestore(&pm_lock, flags);
+ }
+ 
+ static unsigned long cpu_clk_get_rate(struct clk *clk)
+ {
+ 	unsigned long cksel, shift = 0;
+ 
+-	cksel = sm_readl(&system_manager, PM_CKSEL);
+-	if (cksel & SM_BIT(CPUDIV))
+-		shift = SM_BFEXT(CPUSEL, cksel) + 1;
++	cksel = pm_readl(CKSEL);
++	if (cksel & PM_BIT(CPUDIV))
++		shift = PM_BFEXT(CPUSEL, cksel) + 1;
+ 
+ 	return bus_clk_get_rate(clk, shift);
+ }
+ 
++static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
++{
++	u32 control;
++	unsigned long parent_rate, child_div, actual_rate, div;
++
++	parent_rate = clk->parent->get_rate(clk->parent);
++	control = pm_readl(CKSEL);
++
++	if (control & PM_BIT(HSBDIV))
++		child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
++	else
++		child_div = 1;
++
++	if (rate > 3 * (parent_rate / 4) || child_div == 1) {
++		actual_rate = parent_rate;
++		control &= ~PM_BIT(CPUDIV);
++	} else {
++		unsigned int cpusel;
++		div = (parent_rate + rate / 2) / rate;
++		if (div > child_div)
++			div = child_div;
++		cpusel = (div > 1) ? (fls(div) - 2) : 0;
++		control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
++		actual_rate = parent_rate / (1 << (cpusel + 1));
++	}
++
++	pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
++			clk->name, rate, actual_rate);
++
++	if (apply)
++		pm_writel(CKSEL, control);
++
++	return actual_rate;
++}
++
+ static void hsb_clk_mode(struct clk *clk, int enabled)
+ {
+-	struct at32_sm *sm = &system_manager;
+ 	unsigned long flags;
+ 	u32 mask;
+ 
+-	spin_lock_irqsave(&sm->lock, flags);
+-	mask = sm_readl(sm, PM_HSB_MASK);
++	spin_lock_irqsave(&pm_lock, flags);
++	mask = pm_readl(HSB_MASK);
+ 	if (enabled)
+ 		mask |= 1 << clk->index;
+ 	else
+ 		mask &= ~(1 << clk->index);
+-	sm_writel(sm, PM_HSB_MASK, mask);
+-	spin_unlock_irqrestore(&sm->lock, flags);
++	pm_writel(HSB_MASK, mask);
++	spin_unlock_irqrestore(&pm_lock, flags);
+ }
+ 
+ static unsigned long hsb_clk_get_rate(struct clk *clk)
+ {
+ 	unsigned long cksel, shift = 0;
+ 
+-	cksel = sm_readl(&system_manager, PM_CKSEL);
+-	if (cksel & SM_BIT(HSBDIV))
+-		shift = SM_BFEXT(HSBSEL, cksel) + 1;
++	cksel = pm_readl(CKSEL);
++	if (cksel & PM_BIT(HSBDIV))
++		shift = PM_BFEXT(HSBSEL, cksel) + 1;
+ 
+ 	return bus_clk_get_rate(clk, shift);
+ }
+ 
+ static void pba_clk_mode(struct clk *clk, int enabled)
+ {
+-	struct at32_sm *sm = &system_manager;
+ 	unsigned long flags;
+ 	u32 mask;
+ 
+-	spin_lock_irqsave(&sm->lock, flags);
+-	mask = sm_readl(sm, PM_PBA_MASK);
++	spin_lock_irqsave(&pm_lock, flags);
++	mask = pm_readl(PBA_MASK);
+ 	if (enabled)
+ 		mask |= 1 << clk->index;
+ 	else
+ 		mask &= ~(1 << clk->index);
+-	sm_writel(sm, PM_PBA_MASK, mask);
+-	spin_unlock_irqrestore(&sm->lock, flags);
++	pm_writel(PBA_MASK, mask);
++	spin_unlock_irqrestore(&pm_lock, flags);
+ }
+ 
+ static unsigned long pba_clk_get_rate(struct clk *clk)
+ {
+ 	unsigned long cksel, shift = 0;
+ 
+-	cksel = sm_readl(&system_manager, PM_CKSEL);
+-	if (cksel & SM_BIT(PBADIV))
+-		shift = SM_BFEXT(PBASEL, cksel) + 1;
++	cksel = pm_readl(CKSEL);
++	if (cksel & PM_BIT(PBADIV))
++		shift = PM_BFEXT(PBASEL, cksel) + 1;
+ 
+ 	return bus_clk_get_rate(clk, shift);
+ }
+ 
+ static void pbb_clk_mode(struct clk *clk, int enabled)
+ {
+-	struct at32_sm *sm = &system_manager;
+ 	unsigned long flags;
+ 	u32 mask;
+ 
+-	spin_lock_irqsave(&sm->lock, flags);
+-	mask = sm_readl(sm, PM_PBB_MASK);
++	spin_lock_irqsave(&pm_lock, flags);
++	mask = pm_readl(PBB_MASK);
+ 	if (enabled)
+ 		mask |= 1 << clk->index;
+ 	else
+ 		mask &= ~(1 << clk->index);
+-	sm_writel(sm, PM_PBB_MASK, mask);
+-	spin_unlock_irqrestore(&sm->lock, flags);
++	pm_writel(PBB_MASK, mask);
++	spin_unlock_irqrestore(&pm_lock, flags);
+ }
+ 
+ static unsigned long pbb_clk_get_rate(struct clk *clk)
+ {
+ 	unsigned long cksel, shift = 0;
+ 
+-	cksel = sm_readl(&system_manager, PM_CKSEL);
+-	if (cksel & SM_BIT(PBBDIV))
+-		shift = SM_BFEXT(PBBSEL, cksel) + 1;
++	cksel = pm_readl(CKSEL);
++	if (cksel & PM_BIT(PBBDIV))
++		shift = PM_BFEXT(PBBSEL, cksel) + 1;
+ 
+ 	return bus_clk_get_rate(clk, shift);
+ }
+@@ -296,6 +335,7 @@
+ static struct clk cpu_clk = {
+ 	.name		= "cpu",
+ 	.get_rate	= cpu_clk_get_rate,
++	.set_rate	= cpu_clk_set_rate,
+ 	.users		= 1,
+ };
+ static struct clk hsb_clk = {
+@@ -327,12 +367,12 @@
+ {
+ 	u32 control;
+ 
+-	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
++	control = pm_readl(GCCTRL(clk->index));
+ 	if (enabled)
+-		control |= SM_BIT(CEN);
++		control |= PM_BIT(CEN);
+ 	else
+-		control &= ~SM_BIT(CEN);
+-	sm_writel(&system_manager, PM_GCCTRL + 4 * clk->index, control);
++		control &= ~PM_BIT(CEN);
++	pm_writel(GCCTRL(clk->index), control);
+ }
+ 
+ static unsigned long genclk_get_rate(struct clk *clk)
+@@ -340,9 +380,9 @@
+ 	u32 control;
+ 	unsigned long div = 1;
+ 
+-	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
+-	if (control & SM_BIT(DIVEN))
+-		div = 2 * (SM_BFEXT(DIV, control) + 1);
++	control = pm_readl(GCCTRL(clk->index));
++	if (control & PM_BIT(DIVEN))
++		div = 2 * (PM_BFEXT(DIV, control) + 1);
+ 
+ 	return clk->parent->get_rate(clk->parent) / div;
+ }
+@@ -353,23 +393,22 @@
+ 	unsigned long parent_rate, actual_rate, div;
+ 
+ 	parent_rate = clk->parent->get_rate(clk->parent);
+-	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
++	control = pm_readl(GCCTRL(clk->index));
+ 
+ 	if (rate > 3 * parent_rate / 4) {
+ 		actual_rate = parent_rate;
+-		control &= ~SM_BIT(DIVEN);
++		control &= ~PM_BIT(DIVEN);
+ 	} else {
+ 		div = (parent_rate + rate) / (2 * rate) - 1;
+-		control = SM_BFINS(DIV, div, control) | SM_BIT(DIVEN);
++		control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
+ 		actual_rate = parent_rate / (2 * (div + 1));
+ 	}
+ 
+-	printk("clk %s: new rate %lu (actual rate %lu)\n",
+-	       clk->name, rate, actual_rate);
++	dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
++		clk->name, rate, actual_rate);
+ 
+ 	if (apply)
+-		sm_writel(&system_manager, PM_GCCTRL + 4 * clk->index,
+-			  control);
++		pm_writel(GCCTRL(clk->index), control);
+ 
+ 	return actual_rate;
+ }
+@@ -378,24 +417,24 @@
+ {
+ 	u32 control;
+ 
+-	printk("clk %s: new parent %s (was %s)\n",
+-	       clk->name, parent->name, clk->parent->name);
++	dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
++		clk->name, parent->name, clk->parent->name);
+ 
+-	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
++	control = pm_readl(GCCTRL(clk->index));
+ 
+ 	if (parent == &osc1 || parent == &pll1)
+-		control |= SM_BIT(OSCSEL);
++		control |= PM_BIT(OSCSEL);
+ 	else if (parent == &osc0 || parent == &pll0)
+-		control &= ~SM_BIT(OSCSEL);
++		control &= ~PM_BIT(OSCSEL);
+ 	else
+ 		return -EINVAL;
+ 
+ 	if (parent == &pll0 || parent == &pll1)
+-		control |= SM_BIT(PLLSEL);
++		control |= PM_BIT(PLLSEL);
+ 	else
+-		control &= ~SM_BIT(PLLSEL);
++		control &= ~PM_BIT(PLLSEL);
+ 
+-	sm_writel(&system_manager, PM_GCCTRL + 4 * clk->index, control);
++	pm_writel(GCCTRL(clk->index), control);
+ 	clk->parent = parent;
+ 
+ 	return 0;
+@@ -408,11 +447,11 @@
+ 
+ 	BUG_ON(clk->index > 7);
+ 
+-	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
+-	if (control & SM_BIT(OSCSEL))
+-		parent = (control & SM_BIT(PLLSEL)) ? &pll1 : &osc1;
++	control = pm_readl(GCCTRL(clk->index));
++	if (control & PM_BIT(OSCSEL))
++		parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
+ 	else
+-		parent = (control & SM_BIT(PLLSEL)) ? &pll0 : &osc0;
++		parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
+ 
+ 	clk->parent = parent;
+ }
+@@ -420,21 +459,53 @@
+ /* --------------------------------------------------------------------
+  *  System peripherals
+  * -------------------------------------------------------------------- */
+-static struct resource sm_resource[] = {
+-	PBMEM(0xfff00000),
+-	NAMED_IRQ(19, "eim"),
+-	NAMED_IRQ(20, "pm"),
+-	NAMED_IRQ(21, "rtc"),
++static struct resource at32_pm0_resource[] = {
++	{
++		.start	= 0xfff00000,
++		.end	= 0xfff0007f,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(20),
+ };
+-struct platform_device at32_sm_device = {
+-	.name		= "sm",
+-	.id		= 0,
+-	.resource	= sm_resource,
+-	.num_resources	= ARRAY_SIZE(sm_resource),
++
++static struct resource at32ap700x_rtc0_resource[] = {
++	{
++		.start	= 0xfff00080,
++		.end	= 0xfff000af,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(21),
+ };
+-static struct clk at32_sm_pclk = {
++
++static struct resource at32_wdt0_resource[] = {
++	{
++		.start	= 0xfff000b0,
++		.end	= 0xfff000bf,
++		.flags	= IORESOURCE_MEM,
++	},
++};
++
++static struct resource at32_eic0_resource[] = {
++	{
++		.start	= 0xfff00100,
++		.end	= 0xfff0013f,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(19),
++};
++
++DEFINE_DEV(at32_pm, 0);
++DEFINE_DEV(at32ap700x_rtc, 0);
++DEFINE_DEV(at32_wdt, 0);
++DEFINE_DEV(at32_eic, 0);
++
++/*
++ * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
++ * is always running.
++ */
++static struct clk at32_pm_pclk = {
+ 	.name		= "pclk",
+-	.dev		= &at32_sm_device.dev,
++	.dev		= &at32_pm0_device.dev,
+ 	.parent		= &pbb_clk,
+ 	.mode		= pbb_clk_mode,
+ 	.get_rate	= pbb_clk_get_rate,
+@@ -491,6 +562,17 @@
+ 	.users		= 1,
+ };
+ 
++static struct resource dmaca0_resource[] = {
++	{
++		.start	= 0xff200000,
++		.end	= 0xff20ffff,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(2),
++};
++DEFINE_DEV(dmaca, 0);
++DEV_CLK(hclk, dmaca0, hsb, 10);
++
+ /* --------------------------------------------------------------------
+  * HMATRIX
+  * -------------------------------------------------------------------- */
+@@ -583,12 +665,14 @@
+ 
+ void __init at32_add_system_devices(void)
+ {
+-	system_manager.eim_first_irq = EIM_IRQ_BASE;
+-
+-	platform_device_register(&at32_sm_device);
++	platform_device_register(&at32_pm0_device);
+ 	platform_device_register(&at32_intc0_device);
++	platform_device_register(&at32ap700x_rtc0_device);
++	platform_device_register(&at32_wdt0_device);
++	platform_device_register(&at32_eic0_device);
+ 	platform_device_register(&smc0_device);
+ 	platform_device_register(&pdc_device);
++	platform_device_register(&dmaca0_device);
+ 
+ 	platform_device_register(&at32_systc0_device);
+ 
+@@ -894,6 +978,83 @@
+ }
+ 
+ /* --------------------------------------------------------------------
++ *  TWI
++ * -------------------------------------------------------------------- */
++
++static struct resource atmel_twi0_resource[] = {
++	PBMEM(0xffe00800),
++	IRQ(5),
++};
++DEFINE_DEV(atmel_twi, 0);
++DEV_CLK(pclk,atmel_twi0,pba,2);
++
++struct platform_device *__init
++at32_add_device_twi(unsigned int id)
++{
++	struct platform_device *pdev;
++
++	switch (id) {
++	case 0:
++		pdev = &atmel_twi0_device;
++		select_peripheral(PA(6),  PERIPH_A, 0);	/* SDA	*/
++		select_peripheral(PA(7),  PERIPH_A, 0);	/* SCL	*/
++		break;
++
++	default:
++		return NULL;
++	}
++
++	platform_device_register(pdev);
++	return pdev;
++}
++
++/* --------------------------------------------------------------------
++ * MMC
++ * -------------------------------------------------------------------- */
++static struct mci_platform_data atmel_mci0_data = {
++	.detect_pin	= GPIO_PIN_NONE,
++	.wp_pin		= GPIO_PIN_NONE,
++};
++static struct resource atmel_mci0_resource[] = {
++	PBMEM(0xfff02400),
++	IRQ(28),
++};
++DEFINE_DEV_DATA(atmel_mci, 0);
++DEV_CLK(mci_clk, atmel_mci0, pbb, 9);
++
++struct platform_device *__init
++at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
++{
++	struct platform_device *pdev;
++
++	switch (id) {
++	case 0:
++		pdev = &atmel_mci0_device;
++		select_peripheral(PA(10), PERIPH_A, 0);	/* CLK	 */
++		select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
++		select_peripheral(PA(12), PERIPH_A, 0);	/* DATA0 */
++		select_peripheral(PA(13), PERIPH_A, 0);	/* DATA1 */
++		select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
++		select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
++		break;
++	default:
++		return NULL;
++	}
++
++	if (data) {
++		if (data->detect_pin != GPIO_PIN_NONE)
++			at32_select_gpio(data->detect_pin, 0);
++		if (data->wp_pin != GPIO_PIN_NONE)
++			at32_select_gpio(data->wp_pin, 0);
++		memcpy(pdev->dev.platform_data, data,
++		       sizeof(struct mci_platform_data));
++	}
++
++	platform_device_register(pdev);
++	return pdev;
++}
++
++/* --------------------------------------------------------------------
+  *  LCDC
+  * -------------------------------------------------------------------- */
+ static struct atmel_lcdfb_info atmel_lcdfb0_data;
+@@ -1013,6 +1174,228 @@
+ }
+ 
+ /* --------------------------------------------------------------------
++ *  USB Device Controller
++ * -------------------------------------------------------------------- */
++static struct resource usba0_resource[] __initdata = {
++	{
++		.name		= "fifo",
++		.start		= 0xff300000,
++		.end		= 0xff3fffff,
++		.flags		= IORESOURCE_MEM,
++	}, {
++		.name		= "regs",
++		.start		= 0xfff03000,
++		.end		= 0xfff033ff,
++		.flags		= IORESOURCE_MEM,
++	},
++	IRQ(31),
++};
++static struct clk usba0_pclk = {
++	.name		= "pclk",
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.index		= 12,
++};
++static struct clk usba0_hclk = {
++	.name		= "hclk",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= hsb_clk_get_rate,
++	.index		= 6,
++};
++
++struct platform_device *__init
++at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
++{
++	struct platform_device *pdev;
++
++	if (id != 0)
++		return NULL;
++
++	pdev = platform_device_alloc("atmel_usba_udc", 0);
++	if (!pdev)
++		return NULL;
++
++	if (platform_device_add_resources(pdev, usba0_resource,
++					  ARRAY_SIZE(usba0_resource)))
++		goto out_free_pdev;
++
++	if (data) {
++		if (platform_device_add_data(pdev, data, sizeof(*data)))
++			goto out_free_pdev;
++
++		if (data->vbus_pin != GPIO_PIN_NONE)
++			at32_select_gpio(data->vbus_pin, 0);
++	}
++
++	usba0_pclk.dev = &pdev->dev;
++	usba0_hclk.dev = &pdev->dev;
++
++	platform_device_add(pdev);
++
++	return pdev;
++
++out_free_pdev:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++/* --------------------------------------------------------------------
++ *  SSC
++ * -------------------------------------------------------------------- */
++static struct resource ssc0_resource[] = {
++	PBMEM(0xffe01c00),
++	IRQ(10),
++};
++DEFINE_DEV(ssc, 0);
++DEV_CLK(pclk, ssc0, pba, 7);
++
++static struct resource ssc1_resource[] = {
++	PBMEM(0xffe02000),
++	IRQ(11),
++};
++DEFINE_DEV(ssc, 1);
++DEV_CLK(pclk, ssc1, pba, 8);
++
++static struct resource ssc2_resource[] = {
++	PBMEM(0xffe02400),
++	IRQ(12),
++};
++DEFINE_DEV(ssc, 2);
++DEV_CLK(pclk, ssc2, pba, 9);
++
++struct platform_device *__init
++at32_add_device_ssc(unsigned int id, unsigned int flags)
++{
++	struct platform_device *pdev;
++
++	switch (id) {
++	case 0:
++		pdev = &ssc0_device;
++		if (flags & ATMEL_SSC_RF)
++			select_peripheral(PA(21), PERIPH_A, 0);	/* RF */
++		if (flags & ATMEL_SSC_RK)
++			select_peripheral(PA(22), PERIPH_A, 0);	/* RK */
++		if (flags & ATMEL_SSC_TK)
++			select_peripheral(PA(23), PERIPH_A, 0);	/* TK */
++		if (flags & ATMEL_SSC_TF)
++			select_peripheral(PA(24), PERIPH_A, 0);	/* TF */
++		if (flags & ATMEL_SSC_TD)
++			select_peripheral(PA(25), PERIPH_A, 0);	/* TD */
++		if (flags & ATMEL_SSC_RD)
++			select_peripheral(PA(26), PERIPH_A, 0);	/* RD */
++		break;
++	case 1:
++		pdev = &ssc1_device;
++		if (flags & ATMEL_SSC_RF)
++			select_peripheral(PA(0), PERIPH_B, 0);	/* RF */
++		if (flags & ATMEL_SSC_RK)
++			select_peripheral(PA(1), PERIPH_B, 0);	/* RK */
++		if (flags & ATMEL_SSC_TK)
++			select_peripheral(PA(2), PERIPH_B, 0);	/* TK */
++		if (flags & ATMEL_SSC_TF)
++			select_peripheral(PA(3), PERIPH_B, 0);	/* TF */
++		if (flags & ATMEL_SSC_TD)
++			select_peripheral(PA(4), PERIPH_B, 0);	/* TD */
++		if (flags & ATMEL_SSC_RD)
++			select_peripheral(PA(5), PERIPH_B, 0);	/* RD */
++		break;
++	case 2:
++		pdev = &ssc2_device;
++		if (flags & ATMEL_SSC_TD)
++			select_peripheral(PB(13), PERIPH_A, 0);	/* TD */
++		if (flags & ATMEL_SSC_RD)
++			select_peripheral(PB(14), PERIPH_A, 0);	/* RD */
++		if (flags & ATMEL_SSC_TK)
++			select_peripheral(PB(15), PERIPH_A, 0);	/* TK */
++		if (flags & ATMEL_SSC_TF)
++			select_peripheral(PB(16), PERIPH_A, 0);	/* TF */
++		if (flags & ATMEL_SSC_RF)
++			select_peripheral(PB(17), PERIPH_A, 0);	/* RF */
++		if (flags & ATMEL_SSC_RK)
++			select_peripheral(PB(18), PERIPH_A, 0);	/* RK */
++		break;
++	default:
++		return NULL;
++	}
++
++	platform_device_register(pdev);
++	return pdev;
++}
++
++/* --------------------------------------------------------------------
++ *  AC97C
++ * -------------------------------------------------------------------- */
++static struct resource atmel_ac97c0_resource[] = {
++	PBMEM(0xfff02800),
++	IRQ(29),
++};
++DEFINE_DEV(atmel_ac97c, 0);
++DEV_CLK(pclk, atmel_ac97c0, pbb, 10);
++
++struct platform_device *__init
++at32_add_device_ac97c(unsigned int id)
++{
++	struct platform_device *pdev;
++
++	switch (id) {
++	case 0:
++		pdev = &atmel_ac97c0_device;
++		select_peripheral(PB(20), PERIPH_B, 0);	/* SYNC	*/
++		select_peripheral(PB(21), PERIPH_B, 0);	/* SDO	*/
++		select_peripheral(PB(22), PERIPH_B, 0);	/* SDI	*/
++		select_peripheral(PB(23), PERIPH_B, 0);	/* SCLK	*/
++		break;
++	default:
++		return NULL;
++	}
++
++	platform_device_register(pdev);
++	return pdev;
++}
++
++/* --------------------------------------------------------------------
++ *  DAC
++ * -------------------------------------------------------------------- */
++static struct resource abdac0_resource[] = {
++	PBMEM(0xfff02000),
++	IRQ(27),
++};
++DEFINE_DEV(abdac, 0);
++DEV_CLK(pclk, abdac0, pbb, 8);
++static struct clk abdac0_sample_clk = {
++	.name           = "sample_clk",
++	.dev            = &abdac0_device.dev,
++	.mode           = genclk_mode,
++	.get_rate       = genclk_get_rate,
++	.set_rate       = genclk_set_rate,
++	.set_parent     = genclk_set_parent,
++	.index          = 6,
++};
++
++struct platform_device *__init
++at32_add_device_abdac(unsigned int id)
++{
++	struct platform_device *pdev;
++
++	switch (id) {
++	case 0:
++		pdev = &abdac0_device;
++		select_peripheral(PB(20), PERIPH_A, 0);	/* DATA1	*/
++		select_peripheral(PB(21), PERIPH_A, 0);	/* DATA0	*/
++		select_peripheral(PB(22), PERIPH_A, 0);	/* DATAN1	*/
++		select_peripheral(PB(23), PERIPH_A, 0);	/* DATAN0	*/
++		break;
++	default:
++		return NULL;
++	}
++
++	platform_device_register(pdev);
++	return pdev;
++}
++
++/* --------------------------------------------------------------------
+  *  GCLK
+  * -------------------------------------------------------------------- */
+ static struct clk gclk0 = {
+@@ -1066,7 +1449,7 @@
+ 	&hsb_clk,
+ 	&pba_clk,
+ 	&pbb_clk,
+-	&at32_sm_pclk,
++	&at32_pm_pclk,
+ 	&at32_intc0_pclk,
+ 	&hmatrix_clk,
+ 	&ebi_clk,
+@@ -1075,6 +1458,7 @@
+ 	&smc0_mck,
+ 	&pdc_hclk,
+ 	&pdc_pclk,
++	&dmaca0_hclk,
+ 	&pico_clk,
+ 	&pio0_mck,
+ 	&pio1_mck,
+@@ -1092,8 +1476,18 @@
+ 	&macb1_pclk,
+ 	&atmel_spi0_spi_clk,
+ 	&atmel_spi1_spi_clk,
++	&atmel_twi0_pclk,
++	&atmel_mci0_mci_clk,
+ 	&atmel_lcdfb0_hck1,
+ 	&atmel_lcdfb0_pixclk,
++	&usba0_pclk,
++	&usba0_hclk,
++	&ssc0_pclk,
++	&ssc1_pclk,
++	&ssc2_pclk,
++	&atmel_ac97c0_pclk,
++	&abdac0_pclk,
++	&abdac0_sample_clk,
+ 	&gclk0,
+ 	&gclk1,
+ 	&gclk2,
+@@ -1113,18 +1507,20 @@
+ 
+ void __init at32_clock_init(void)
+ {
+-	struct at32_sm *sm = &system_manager;
+ 	u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
+ 	int i;
+ 
+-	if (sm_readl(sm, PM_MCCTRL) & SM_BIT(PLLSEL))
++	if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
+ 		main_clock = &pll0;
+-	else
++		cpu_clk.parent = &pll0;
++	} else {
+ 		main_clock = &osc0;
++		cpu_clk.parent = &osc0;
++	}
+ 
+-	if (sm_readl(sm, PM_PLL0) & SM_BIT(PLLOSC))
++	if (pm_readl(PLL0) & PM_BIT(PLLOSC))
+ 		pll0.parent = &osc1;
+-	if (sm_readl(sm, PM_PLL1) & SM_BIT(PLLOSC))
++	if (pm_readl(PLL1) & PM_BIT(PLLOSC))
+ 		pll1.parent = &osc1;
+ 
+ 	genclk_init_parent(&gclk0);
+@@ -1133,6 +1529,7 @@
+ 	genclk_init_parent(&gclk3);
+ 	genclk_init_parent(&gclk4);
+ 	genclk_init_parent(&atmel_lcdfb0_pixclk);
++	genclk_init_parent(&abdac0_sample_clk);
+ 
+ 	/*
+ 	 * Turn on all clocks that have at least one user already, and
+@@ -1157,8 +1554,8 @@
+ 			pbb_mask |= 1 << clk->index;
+ 	}
+ 
+-	sm_writel(sm, PM_CPU_MASK, cpu_mask);
+-	sm_writel(sm, PM_HSB_MASK, hsb_mask);
+-	sm_writel(sm, PM_PBA_MASK, pba_mask);
+-	sm_writel(sm, PM_PBB_MASK, pbb_mask);
++	pm_writel(CPU_MASK, cpu_mask);
++	pm_writel(HSB_MASK, hsb_mask);
++	pm_writel(PBA_MASK, pba_mask);
++	pm_writel(PBB_MASK, pbb_mask);
+ }
+Index: linux-2.6.22.1/arch/avr32/mach-at32ap/cpufreq.c
+===================================================================
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/cpufreq.c	(revision 0)
++++ linux-2.6.22.1/arch/avr32/mach-at32ap/cpufreq.c	(revision 0)
+@@ -0,0 +1,112 @@
++/*
++ * Copyright (C) 2004-2007 Atmel Corporation
++ *
++ * Based on MIPS implementation arch/mips/kernel/time.c
++ *   Copyright 2001 MontaVista Software Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++/*#define DEBUG*/
++
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/cpufreq.h>
++#include <linux/io.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <asm/system.h>
++
++static struct clk *cpuclk;
++
++static int at32_verify_speed(struct cpufreq_policy *policy)
++{
++	if (policy->cpu != 0)
++		return -EINVAL;
++
++	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
++			policy->cpuinfo.max_freq);
++	return 0;
++}
++
++static unsigned int at32_get_speed(unsigned int cpu)
++{
++	/* No SMP support */
++	if (cpu)
++		return 0;
++	return (unsigned int)((clk_get_rate(cpuclk) + 500) / 1000);
++}
++
++static int at32_set_target(struct cpufreq_policy *policy,
++			  unsigned int target_freq,
++			  unsigned int relation)
++{
++	struct cpufreq_freqs freqs;
++	long freq;
++
++	/* Convert target_freq from kHz to Hz */
++	freq = clk_round_rate(cpuclk, target_freq * 1000);
++
++	/* Check if policy->min <= new_freq <= policy->max */
++	if(freq < (policy->min * 1000) || freq > (policy->max * 1000))
++		return -EINVAL;
++
++	pr_debug("cpufreq: requested frequency %u Hz\n", target_freq * 1000);
++
++	freqs.old = at32_get_speed(0);
++	freqs.new = (freq + 500) / 1000;
++	freqs.cpu = 0;
++	freqs.flags = 0;
++
++	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
++	clk_set_rate(cpuclk, freq);
++	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
++
++	pr_debug("cpufreq: set frequency %lu Hz\n", freq);
++
++	return 0;
++}
++
++static int __init at32_cpufreq_driver_init(struct cpufreq_policy *policy)
++{
++	if (policy->cpu != 0)
++		return -EINVAL;
++
++	cpuclk = clk_get(NULL, "cpu");
++	if (IS_ERR(cpuclk)) {
++		pr_debug("cpufreq: could not get CPU clk\n");
++		return PTR_ERR(cpuclk);
++	}
++
++	policy->cpuinfo.min_freq = (clk_round_rate(cpuclk, 1) + 500) / 1000;
++	policy->cpuinfo.max_freq = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
++	policy->cpuinfo.transition_latency = 0;
++	policy->cur = at32_get_speed(0);
++	policy->min = policy->cpuinfo.min_freq;
++	policy->max = policy->cpuinfo.max_freq;
++	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
++
++	printk("cpufreq: AT32AP CPU frequency driver\n");
++
++	return 0;
++}
++
++static struct cpufreq_driver at32_driver = {
++	.name		= "at32ap",
++	.owner		= THIS_MODULE,
++	.init		= at32_cpufreq_driver_init,
++	.verify		= at32_verify_speed,
++	.target		= at32_set_target,
++	.get		= at32_get_speed,
++	.flags		= CPUFREQ_STICKY,
++};
++
++static int __init at32_cpufreq_init(void)
++{
++	return cpufreq_register_driver(&at32_driver);
++}
++
++arch_initcall(at32_cpufreq_init);
+Index: linux-2.6.22.1/arch/avr32/mach-at32ap/gpio-dev.c
+===================================================================
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/gpio-dev.c	(revision 0)
++++ linux-2.6.22.1/arch/avr32/mach-at32ap/gpio-dev.c	(revision 0)
+@@ -0,0 +1,570 @@
++/*
++ * GPIO /dev and configfs interface
++ *
++ * Copyright (C) 2006-2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/configfs.h>
++#include <linux/cdev.h>
++#include <linux/fs.h>
++#include <linux/interrupt.h>
++#include <linux/poll.h>
++#include <linux/uaccess.h>
++#include <linux/wait.h>
++
++#include <asm/gpio.h>
++#include <asm/arch/portmux.h>
++
++#define GPIO_DEV_MAX			8
++
++static struct class *gpio_dev_class;
++static dev_t gpio_devt;
++
++struct gpio_item {
++	spinlock_t lock;
++
++	int enabled;
++	int initialized;
++	int port;
++	u32 pin_mask;
++	u32 oe_mask;
++
++	/* Pin state last time we read it (for blocking reads) */
++	u32 pin_state;
++	int changed;
++
++	wait_queue_head_t change_wq;
++	struct fasync_struct *async_queue;
++
++	int id;
++	struct class_device *gpio_dev;
++	struct cdev char_dev;
++	struct config_item item;
++};
++
++struct gpio_attribute {
++	struct configfs_attribute attr;
++	ssize_t (*show)(struct gpio_item *, char *);
++	ssize_t (*store)(struct gpio_item *, const char *, size_t);
++};
++
++static irqreturn_t gpio_dev_interrupt(int irq, void *dev_id)
++{
++	struct gpio_item *gpio = dev_id;
++	u32 old_state, new_state;
++
++	old_state = gpio->pin_state;
++	new_state = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
++	gpio->pin_state = new_state;
++
++	if (new_state != old_state) {
++		gpio->changed = 1;
++		wake_up_interruptible(&gpio->change_wq);
++
++		if (gpio->async_queue)
++			kill_fasync(&gpio->async_queue, SIGIO, POLL_IN);
++	}
++
++	return IRQ_HANDLED;
++}
++
++static int gpio_dev_open(struct inode *inode, struct file *file)
++{
++	struct gpio_item *gpio = container_of(inode->i_cdev,
++					      struct gpio_item,
++					      char_dev);
++	unsigned int irq;
++	unsigned int i;
++	int ret;
++
++	nonseekable_open(inode, file);
++	config_item_get(&gpio->item);
++	file->private_data = gpio;
++
++	gpio->pin_state = at32_gpio_get_value_multiple(gpio->port,
++						       gpio->pin_mask);
++	gpio->changed = 1;
++
++	for (i = 0; i < 32; i++) {
++		if (gpio->pin_mask & (1 << i)) {
++			irq = gpio_to_irq(32 * gpio->port + i);
++			ret = request_irq(irq, gpio_dev_interrupt, 0,
++					  "gpio-dev", gpio);
++			if (ret)
++				goto err_irq;
++		}
++	}
++
++	return 0;
++
++err_irq:
++	while (i--) {
++		if (gpio->pin_mask & (1 << i)) {
++			irq = gpio_to_irq(32 * gpio->port + i);
++			free_irq(irq, gpio);
++		}
++	}
++
++	config_item_put(&gpio->item);
++
++	return ret;
++}
++
++static int gpio_dev_fasync(int fd, struct file *file, int mode)
++{
++	struct gpio_item *gpio = file->private_data;
++
++	return fasync_helper(fd, file, mode, &gpio->async_queue);
++}
++
++static int gpio_dev_release(struct inode *inode, struct file *file)
++{
++	struct gpio_item *gpio = file->private_data;
++	unsigned int irq;
++	unsigned int i;
++
++	gpio_dev_fasync(-1, file, 0);
++
++	for (i = 0; i < 32; i++) {
++		if (gpio->pin_mask & (1 << i)) {
++			irq = gpio_to_irq(32 * gpio->port + i);
++			free_irq(irq, gpio);
++		}
++	}
++
++	config_item_put(&gpio->item);
++
++	return 0;
++}
++
++static unsigned int gpio_dev_poll(struct file *file, poll_table *wait)
++{
++	struct gpio_item *gpio = file->private_data;
++	unsigned int mask = 0;
++
++	poll_wait(file, &gpio->change_wq, wait);
++	if (gpio->changed)
++		mask |= POLLIN | POLLRDNORM;
++
++	return mask;
++}
++
++static ssize_t gpio_dev_read(struct file *file, char __user *buf,
++			     size_t count, loff_t *offset)
++{
++	struct gpio_item *gpio = file->private_data;
++	u32 value;
++
++	spin_lock_irq(&gpio->lock);
++	while (!gpio->changed) {
++		spin_unlock_irq(&gpio->lock);
++
++		if (file->f_flags & O_NONBLOCK)
++			return -EAGAIN;
++
++		if (wait_event_interruptible(gpio->change_wq, gpio->changed))
++			return -ERESTARTSYS;
++
++		spin_lock_irq(&gpio->lock);
++	}
++
++	gpio->changed = 0;
++	value = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
++
++	spin_unlock_irq(&gpio->lock);
++
++	count = min(count, (size_t)4);
++	if (copy_to_user(buf, &value, count))
++		return -EFAULT;
++
++	return count;
++}
++
++static ssize_t gpio_dev_write(struct file *file, const char __user *buf,
++			      size_t count, loff_t *offset)
++{
++	struct gpio_item *gpio = file->private_data;
++	u32 value = 0;
++	u32 mask = ~0UL;
++
++	count = min(count, (size_t)4);
++	if (copy_from_user(&value, buf, count))
++		return -EFAULT;
++
++	/* Assuming big endian */
++	mask <<= (4 - count) * 8;
++	mask &= gpio->pin_mask;
++
++	at32_gpio_set_value_multiple(gpio->port, value, mask);
++
++	return count;
++}
++
++static struct file_operations gpio_dev_fops = {
++	.owner		= THIS_MODULE,
++	.llseek		= no_llseek,
++	.open		= gpio_dev_open,
++	.release	= gpio_dev_release,
++	.fasync		= gpio_dev_fasync,
++	.poll		= gpio_dev_poll,
++	.read		= gpio_dev_read,
++	.write		= gpio_dev_write,
++};
++
++static struct gpio_item *to_gpio_item(struct config_item *item)
++{
++	return item ? container_of(item, struct gpio_item, item) : NULL;
++}
++
++static ssize_t gpio_show_gpio_id(struct gpio_item *gpio, char *page)
++{
++	return sprintf(page, "%d\n", gpio->port);
++}
++
++static ssize_t gpio_store_gpio_id(struct gpio_item *gpio,
++				  const char *page, size_t count)
++{
++	unsigned long id;
++	char *p = (char *)page;
++	ssize_t ret = -EINVAL;
++
++	id = simple_strtoul(p, &p, 0);
++	if (!p || (*p && (*p != '\n')))
++		return -EINVAL;
++
++	/* Switching PIO is not allowed when live... */
++	spin_lock(&gpio->lock);
++	if (!gpio->enabled) {
++		ret = -ENXIO;
++		if (at32_gpio_port_is_valid(id)) {
++			gpio->port = id;
++			ret = count;
++		}
++	}
++	spin_unlock(&gpio->lock);
++
++	return ret;
++}
++
++static ssize_t gpio_show_pin_mask(struct gpio_item *gpio, char *page)
++{
++	return sprintf(page, "0x%08x\n", gpio->pin_mask);
++}
++
++static ssize_t gpio_store_pin_mask(struct gpio_item *gpio,
++				   const char *page, size_t count)
++{
++	u32 new_mask;
++	char *p = (char *)page;
++	ssize_t ret = -EINVAL;
++
++	new_mask = simple_strtoul(p, &p, 0);
++	if (!p || (*p && (*p != '\n')))
++		return -EINVAL;
++
++	/* Can't update the pin mask while live. */
++	spin_lock(&gpio->lock);
++	if (!gpio->enabled) {
++		gpio->oe_mask &= new_mask;
++		gpio->pin_mask = new_mask;
++		ret = count;
++	}
++	spin_unlock(&gpio->lock);
++
++	return ret;
++}
++
++static ssize_t gpio_show_oe_mask(struct gpio_item *gpio, char *page)
++{
++	return sprintf(page, "0x%08x\n", gpio->oe_mask);
++}
++
++static ssize_t gpio_store_oe_mask(struct gpio_item *gpio,
++				  const char *page, size_t count)
++{
++	u32 mask;
++	char *p = (char *)page;
++	ssize_t ret = -EINVAL;
++
++	mask = simple_strtoul(p, &p, 0);
++	if (!p || (*p && (*p != '\n')))
++		return -EINVAL;
++
++	spin_lock(&gpio->lock);
++	if (!gpio->enabled) {
++		gpio->oe_mask = mask & gpio->pin_mask;
++		ret = count;
++	}
++	spin_unlock(&gpio->lock);
++
++	return ret;
++}
++
++static ssize_t gpio_show_enabled(struct gpio_item *gpio, char *page)
++{
++	return sprintf(page, "%d\n", gpio->enabled);
++}
++
++static ssize_t gpio_store_enabled(struct gpio_item *gpio,
++				  const char *page, size_t count)
++{
++	char *p = (char *)page;
++	int enabled;
++	int ret;
++
++	enabled = simple_strtoul(p, &p, 0);
++	if (!p || (*p && (*p != '\n')))
++		return -EINVAL;
++
++	/* make it a boolean value */
++	enabled = !!enabled;
++
++	if (gpio->enabled == enabled)
++		/* No change; do nothing. */
++		return count;
++
++	BUG_ON(gpio->id >= GPIO_DEV_MAX);
++
++	if (!enabled) {
++		class_device_unregister(gpio->gpio_dev);
++		cdev_del(&gpio->char_dev);
++		at32_deselect_pins(gpio->port, gpio->pin_mask);
++		gpio->initialized = 0;
++	} else {
++		if (gpio->port < 0 || !gpio->pin_mask)
++			return -ENODEV;
++	}
++
++	/* Disallow any updates to gpio_id or pin_mask */
++	spin_lock(&gpio->lock);
++	gpio->enabled = enabled;
++	spin_unlock(&gpio->lock);
++
++	if (!enabled)
++		return count;
++
++	/* Now, try to allocate the pins */
++	ret = at32_select_gpio_pins(gpio->port, gpio->pin_mask, gpio->oe_mask);
++	if (ret)
++		goto err_alloc_pins;
++
++	gpio->initialized = 1;
++
++	cdev_init(&gpio->char_dev, &gpio_dev_fops);
++	gpio->char_dev.owner = THIS_MODULE;
++	ret = cdev_add(&gpio->char_dev, MKDEV(MAJOR(gpio_devt), gpio->id), 1);
++	if (ret < 0)
++		goto err_cdev_add;
++	gpio->gpio_dev = class_device_create(gpio_dev_class, NULL,
++					     MKDEV(MAJOR(gpio_devt), gpio->id),
++					     NULL,
++					     "gpio%d", gpio->id);
++	if (IS_ERR(gpio->gpio_dev)) {
++		printk(KERN_ERR "failed to create gpio%d\n", gpio->id);
++		ret = PTR_ERR(gpio->gpio_dev);
++		goto err_class_dev;
++	}
++
++	printk(KERN_INFO "created gpio%d (port%d/0x%08x) as (%d:%d)\n",
++	       gpio->id, gpio->port, gpio->pin_mask,
++	       MAJOR(gpio->gpio_dev->devt), MINOR(gpio->gpio_dev->devt));
++
++	return 0;
++
++err_class_dev:
++	cdev_del(&gpio->char_dev);
++err_cdev_add:
++	at32_deselect_pins(gpio->port, gpio->pin_mask);
++	gpio->initialized = 0;
++err_alloc_pins:
++	spin_lock(&gpio->lock);
++	gpio->enabled = 0;
++	spin_unlock(&gpio->lock);
++
++	return ret;
++}
++
++static struct gpio_attribute gpio_item_attr_gpio_id = {
++	.attr = {
++		.ca_owner = THIS_MODULE,
++		.ca_name = "gpio_id",
++		.ca_mode = S_IRUGO | S_IWUSR,
++	},
++	.show = gpio_show_gpio_id,
++	.store = gpio_store_gpio_id,
++};
++static struct gpio_attribute gpio_item_attr_pin_mask = {
++	.attr = {
++		.ca_owner = THIS_MODULE,
++		.ca_name = "pin_mask",
++		.ca_mode = S_IRUGO | S_IWUSR,
++	},
++	.show = gpio_show_pin_mask,
++	.store = gpio_store_pin_mask,
++};
++static struct gpio_attribute gpio_item_attr_oe_mask = {
++	.attr = {
++		.ca_owner = THIS_MODULE,
++		.ca_name = "oe_mask",
++		.ca_mode = S_IRUGO | S_IWUSR,
++	},
++	.show = gpio_show_oe_mask,
++	.store = gpio_store_oe_mask,
++};
++static struct gpio_attribute gpio_item_attr_enabled = {
++	.attr = {
++		.ca_owner = THIS_MODULE,
++		.ca_name = "enabled",
++		.ca_mode = S_IRUGO | S_IWUSR,
++	},
++	.show = gpio_show_enabled,
++	.store = gpio_store_enabled,
++};
++
++static struct configfs_attribute *gpio_item_attrs[] = {
++	&gpio_item_attr_gpio_id.attr,
++	&gpio_item_attr_pin_mask.attr,
++	&gpio_item_attr_oe_mask.attr,
++	&gpio_item_attr_enabled.attr,
++	NULL,
++};
++
++static ssize_t gpio_show_attr(struct config_item *item,
++			      struct configfs_attribute *attr,
++			      char *page)
++{
++	struct gpio_item *gpio_item = to_gpio_item(item);
++	struct gpio_attribute *gpio_attr
++		= container_of(attr, struct gpio_attribute, attr);
++	ssize_t ret = 0;
++
++	if (gpio_attr->show)
++		ret = gpio_attr->show(gpio_item, page);
++	return ret;
++}
++
++static ssize_t gpio_store_attr(struct config_item *item,
++			       struct configfs_attribute *attr,
++			       const char *page, size_t count)
++{
++	struct gpio_item *gpio_item = to_gpio_item(item);
++	struct gpio_attribute *gpio_attr
++		= container_of(attr, struct gpio_attribute, attr);
++	ssize_t ret = -EINVAL;
++
++	if (gpio_attr->store)
++		ret = gpio_attr->store(gpio_item, page, count);
++	return ret;
++}
++
++static void gpio_release(struct config_item *item)
++{
++	kfree(to_gpio_item(item));
++}
++
++static struct configfs_item_operations gpio_item_ops = {
++	.release		= gpio_release,
++	.show_attribute		= gpio_show_attr,
++	.store_attribute	= gpio_store_attr,
++};
++
++static struct config_item_type gpio_item_type = {
++	.ct_item_ops	= &gpio_item_ops,
++	.ct_attrs	= gpio_item_attrs,
++	.ct_owner	= THIS_MODULE,
++};
++
++static struct config_item *gpio_make_item(struct config_group *group,
++					  const char *name)
++{
++	static int next_id;
++	struct gpio_item *gpio;
++
++	if (next_id >= GPIO_DEV_MAX)
++		return NULL;
++
++	gpio = kzalloc(sizeof(struct gpio_item), GFP_KERNEL);
++	if (!gpio)
++		return NULL;
++
++	gpio->id = next_id++;
++	config_item_init_type_name(&gpio->item, name, &gpio_item_type);
++	spin_lock_init(&gpio->lock);
++	init_waitqueue_head(&gpio->change_wq);
++
++	return &gpio->item;
++}
++
++static void gpio_drop_item(struct config_group *group,
++			   struct config_item *item)
++{
++	struct gpio_item *gpio = to_gpio_item(item);
++
++	spin_lock(&gpio->lock);
++	if (gpio->enabled) {
++		class_device_unregister(gpio->gpio_dev);
++		cdev_del(&gpio->char_dev);
++	}
++
++	if (gpio->initialized) {
++		at32_deselect_pins(gpio->port, gpio->pin_mask);
++		gpio->initialized = 0;
++		gpio->enabled = 0;
++	}
++	spin_unlock(&gpio->lock);
++}
++
++static struct configfs_group_operations gpio_group_ops = {
++	.make_item	= gpio_make_item,
++	.drop_item	= gpio_drop_item,
++};
++
++static struct config_item_type gpio_group_type = {
++	.ct_group_ops	= &gpio_group_ops,
++	.ct_owner	= THIS_MODULE,
++};
++
++static struct configfs_subsystem gpio_subsys = {
++	.su_group = {
++		.cg_item = {
++			 .ci_namebuf = "gpio",
++			 .ci_type = &gpio_group_type,
++		 },
++	},
++};
++
++static int __init gpio_dev_init(void)
++{
++	int err;
++
++	gpio_dev_class = class_create(THIS_MODULE, "gpio-dev");
++	if (IS_ERR(gpio_dev_class)) {
++		err = PTR_ERR(gpio_dev_class);
++		goto err_class_create;
++	}
++
++	err = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpio");
++	if (err < 0)
++		goto err_alloc_chrdev;
++
++	/* Configfs initialization */
++	config_group_init(&gpio_subsys.su_group);
++	init_MUTEX(&gpio_subsys.su_sem);
++	err = configfs_register_subsystem(&gpio_subsys);
++	if (err)
++		goto err_register_subsys;
++
++	return 0;
++
++err_register_subsys:
++	unregister_chrdev_region(gpio_devt, GPIO_DEV_MAX);
++err_alloc_chrdev:
++	class_destroy(gpio_dev_class);
++err_class_create:
++	printk(KERN_WARNING "Failed to initialize gpio /dev interface\n");
++	return err;
++}
++late_initcall(gpio_dev_init);
+Index: linux-2.6.22.1/arch/avr32/mach-at32ap/extint.c
+===================================================================
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/extint.c	(revision 1)
++++ linux-2.6.22.1/arch/avr32/mach-at32ap/extint.c	(arbetskopia)
+@@ -17,42 +17,83 @@
+ 
+ #include <asm/io.h>
+ 
+-#include <asm/arch/sm.h>
++/* EIC register offsets */
++#define EIC_IER					0x0000
++#define EIC_IDR					0x0004
++#define EIC_IMR					0x0008
++#define EIC_ISR					0x000c
++#define EIC_ICR					0x0010
++#define EIC_MODE				0x0014
++#define EIC_EDGE				0x0018
++#define EIC_LEVEL				0x001c
++#define EIC_TEST				0x0020
++#define EIC_NMIC				0x0024
+ 
+-#include "sm.h"
++/* Bitfields in TEST */
++#define EIC_TESTEN_OFFSET			31
++#define EIC_TESTEN_SIZE				1
+ 
+-static void eim_ack_irq(unsigned int irq)
++/* Bitfields in NMIC */
++#define EIC_EN_OFFSET				0
++#define EIC_EN_SIZE				1
++
++/* Bit manipulation macros */
++#define EIC_BIT(name)					\
++	(1 << EIC_##name##_OFFSET)
++#define EIC_BF(name,value)				\
++	(((value) & ((1 << EIC_##name##_SIZE) - 1))	\
++	 << EIC_##name##_OFFSET)
++#define EIC_BFEXT(name,value)				\
++	(((value) >> EIC_##name##_OFFSET)		\
++	 & ((1 << EIC_##name##_SIZE) - 1))
++#define EIC_BFINS(name,value,old)			\
++	(((old) & ~(((1 << EIC_##name##_SIZE) - 1)	\
++		    << EIC_##name##_OFFSET))		\
++	 | EIC_BF(name,value))
++
++/* Register access macros */
++#define eic_readl(port,reg)				\
++	__raw_readl((port)->regs + EIC_##reg)
++#define eic_writel(port,reg,value)			\
++	__raw_writel((value), (port)->regs + EIC_##reg)
++
++struct eic {
++	void __iomem *regs;
++	struct irq_chip *chip;
++	unsigned int first_irq;
++};
++
++static void eic_ack_irq(unsigned int irq)
+ {
+-	struct at32_sm *sm = get_irq_chip_data(irq);
+-	sm_writel(sm, EIM_ICR, 1 << (irq - sm->eim_first_irq));
++	struct eic *eic = get_irq_chip_data(irq);
++	eic_writel(eic, ICR, 1 << (irq - eic->first_irq));
+ }
+ 
+-static void eim_mask_irq(unsigned int irq)
++static void eic_mask_irq(unsigned int irq)
+ {
+-	struct at32_sm *sm = get_irq_chip_data(irq);
+-	sm_writel(sm, EIM_IDR, 1 << (irq - sm->eim_first_irq));
++	struct eic *eic = get_irq_chip_data(irq);
++	eic_writel(eic, IDR, 1 << (irq - eic->first_irq));
+ }
+ 
+-static void eim_mask_ack_irq(unsigned int irq)
++static void eic_mask_ack_irq(unsigned int irq)
+ {
+-	struct at32_sm *sm = get_irq_chip_data(irq);
+-	sm_writel(sm, EIM_ICR, 1 << (irq - sm->eim_first_irq));
+-	sm_writel(sm, EIM_IDR, 1 << (irq - sm->eim_first_irq));
++	struct eic *eic = get_irq_chip_data(irq);
++	eic_writel(eic, ICR, 1 << (irq - eic->first_irq));
++	eic_writel(eic, IDR, 1 << (irq - eic->first_irq));
+ }
+ 
+-static void eim_unmask_irq(unsigned int irq)
++static void eic_unmask_irq(unsigned int irq)
+ {
+-	struct at32_sm *sm = get_irq_chip_data(irq);
+-	sm_writel(sm, EIM_IER, 1 << (irq - sm->eim_first_irq));
++	struct eic *eic = get_irq_chip_data(irq);
++	eic_writel(eic, IER, 1 << (irq - eic->first_irq));
+ }
+ 
+-static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
++static int eic_set_irq_type(unsigned int irq, unsigned int flow_type)
+ {
+-	struct at32_sm *sm = get_irq_chip_data(irq);
++	struct eic *eic = get_irq_chip_data(irq);
+ 	struct irq_desc *desc;
+-	unsigned int i = irq - sm->eim_first_irq;
++	unsigned int i = irq - eic->first_irq;
+ 	u32 mode, edge, level;
+-	unsigned long flags;
+ 	int ret = 0;
+ 
+ 	flow_type &= IRQ_TYPE_SENSE_MASK;
+@@ -60,11 +101,10 @@
+ 		flow_type = IRQ_TYPE_LEVEL_LOW;
+ 
+ 	desc = &irq_desc[irq];
+-	spin_lock_irqsave(&sm->lock, flags);
+ 
+-	mode = sm_readl(sm, EIM_MODE);
+-	edge = sm_readl(sm, EIM_EDGE);
+-	level = sm_readl(sm, EIM_LEVEL);
++	mode = eic_readl(eic, MODE);
++	edge = eic_readl(eic, EDGE);
++	level = eic_readl(eic, LEVEL);
+ 
+ 	switch (flow_type) {
+ 	case IRQ_TYPE_LEVEL_LOW:
+@@ -89,9 +129,9 @@
+ 	}
+ 
+ 	if (ret == 0) {
+-		sm_writel(sm, EIM_MODE, mode);
+-		sm_writel(sm, EIM_EDGE, edge);
+-		sm_writel(sm, EIM_LEVEL, level);
++		eic_writel(eic, MODE, mode);
++		eic_writel(eic, EDGE, edge);
++		eic_writel(eic, LEVEL, level);
+ 
+ 		if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
+ 			flow_type |= IRQ_LEVEL;
+@@ -99,35 +139,33 @@
+ 		desc->status |= flow_type;
+ 	}
+ 
+-	spin_unlock_irqrestore(&sm->lock, flags);
+-
+ 	return ret;
+ }
+ 
+-struct irq_chip eim_chip = {
+-	.name		= "eim",
+-	.ack		= eim_ack_irq,
+-	.mask		= eim_mask_irq,
+-	.mask_ack	= eim_mask_ack_irq,
+-	.unmask		= eim_unmask_irq,
+-	.set_type	= eim_set_irq_type,
++struct irq_chip eic_chip = {
++	.name		= "eic",
++	.ack		= eic_ack_irq,
++	.mask		= eic_mask_irq,
++	.mask_ack	= eic_mask_ack_irq,
++	.unmask		= eic_unmask_irq,
++	.set_type	= eic_set_irq_type,
+ };
+ 
+-static void demux_eim_irq(unsigned int irq, struct irq_desc *desc)
++static void demux_eic_irq(unsigned int irq, struct irq_desc *desc)
+ {
+-	struct at32_sm *sm = desc->handler_data;
++	struct eic *eic = desc->handler_data;
+ 	struct irq_desc *ext_desc;
+ 	unsigned long status, pending;
+ 	unsigned int i, ext_irq;
+ 
+-	status = sm_readl(sm, EIM_ISR);
+-	pending = status & sm_readl(sm, EIM_IMR);
++	status = eic_readl(eic, ISR);
++	pending = status & eic_readl(eic, IMR);
+ 
+ 	while (pending) {
+ 		i = fls(pending) - 1;
+ 		pending &= ~(1 << i);
+ 
+-		ext_irq = i + sm->eim_first_irq;
++		ext_irq = i + eic->first_irq;
+ 		ext_desc = irq_desc + ext_irq;
+ 		if (ext_desc->status & IRQ_LEVEL)
+ 			handle_level_irq(ext_irq, ext_desc);
+@@ -136,51 +174,85 @@
+ 	}
+ }
+ 
+-static int __init eim_init(void)
++static int __init eic_probe(struct platform_device *pdev)
+ {
+-	struct at32_sm *sm = &system_manager;
++	struct eic *eic;
++	struct resource *regs;
+ 	unsigned int i;
+ 	unsigned int nr_irqs;
+ 	unsigned int int_irq;
++	int ret;
+ 	u32 pattern;
+ 
+-	/*
+-	 * The EIM is really the same module as SM, so register
+-	 * mapping, etc. has been taken care of already.
+-	 */
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	int_irq = platform_get_irq(pdev, 0);
++	if (!regs || !int_irq) {
++		dev_dbg(&pdev->dev, "missing regs and/or irq resource\n");
++		return -ENXIO;
++	}
+ 
++	ret = -ENOMEM;
++	eic = kzalloc(sizeof(struct eic), GFP_KERNEL);
++	if (!eic) {
++		dev_dbg(&pdev->dev, "no memory for eic structure\n");
++		goto err_kzalloc;
++	}
++
++	eic->first_irq = EIM_IRQ_BASE + 32 * pdev->id;
++	eic->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!eic->regs) {
++		dev_dbg(&pdev->dev, "failed to map regs\n");
++		goto err_ioremap;
++	}
++
+ 	/*
+ 	 * Find out how many interrupt lines that are actually
+ 	 * implemented in hardware.
+ 	 */
+-	sm_writel(sm, EIM_IDR, ~0UL);
+-	sm_writel(sm, EIM_MODE, ~0UL);
+-	pattern = sm_readl(sm, EIM_MODE);
++	eic_writel(eic, IDR, ~0UL);
++	eic_writel(eic, MODE, ~0UL);
++	pattern = eic_readl(eic, MODE);
+ 	nr_irqs = fls(pattern);
+ 
+ 	/* Trigger on falling edge unless overridden by driver */
+-	sm_writel(sm, EIM_MODE, 0UL);
+-	sm_writel(sm, EIM_EDGE, 0UL);
++	eic_writel(eic, MODE, 0UL);
++	eic_writel(eic, EDGE, 0UL);
+ 
+-	sm->eim_chip = &eim_chip;
++	eic->chip = &eic_chip;
+ 
+ 	for (i = 0; i < nr_irqs; i++) {
+ 		/* NOTE the handler we set here is ignored by the demux */
+-		set_irq_chip_and_handler(sm->eim_first_irq + i, &eim_chip,
++		set_irq_chip_and_handler(eic->first_irq + i, &eic_chip,
+ 					 handle_level_irq);
+-		set_irq_chip_data(sm->eim_first_irq + i, sm);
++		set_irq_chip_data(eic->first_irq + i, eic);
+ 	}
+ 
+-	int_irq = platform_get_irq_byname(sm->pdev, "eim");
++	set_irq_chained_handler(int_irq, demux_eic_irq);
++	set_irq_data(int_irq, eic);
+ 
+-	set_irq_chained_handler(int_irq, demux_eim_irq);
+-	set_irq_data(int_irq, sm);
++	dev_info(&pdev->dev,
++		 "External Interrupt Controller at 0x%p, IRQ %u\n",
++		 eic->regs, int_irq);
++	dev_info(&pdev->dev,
++		 "Handling %u external IRQs, starting with IRQ %u\n",
++		 nr_irqs, eic->first_irq);
+ 
+-	printk("EIM: External Interrupt Module at 0x%p, IRQ %u\n",
+-	       sm->regs, int_irq);
+-	printk("EIM: Handling %u external IRQs, starting with IRQ %u\n",
+-	       nr_irqs, sm->eim_first_irq);
++	return 0;
+ 
+-	return 0;
++err_ioremap:
++	kfree(eic);
++err_kzalloc:
++	return ret;
+ }
+-arch_initcall(eim_init);
++
++static struct platform_driver eic_driver = {
++	.driver = {
++		.name = "at32_eic",
++	},
++};
++
++static int __init eic_init(void)
++{
++	return platform_driver_probe(&eic_driver, eic_probe);
++}
++arch_initcall(eic_init);
+Index: linux-2.6.22.1/arch/avr32/mach-at32ap/pm.h
+===================================================================
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/pm.h	(revision 0)
++++ linux-2.6.22.1/arch/avr32/mach-at32ap/pm.h	(revision 0)
+@@ -0,0 +1,112 @@
++/*
++ * Register definitions for the Power Manager (PM)
++ */
++#ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
++#define __ARCH_AVR32_MACH_AT32AP_PM_H__
++
++/* PM register offsets */
++#define PM_MCCTRL				0x0000
++#define PM_CKSEL				0x0004
++#define PM_CPU_MASK				0x0008
++#define PM_HSB_MASK				0x000c
++#define PM_PBA_MASK				0x0010
++#define PM_PBB_MASK				0x0014
++#define PM_PLL0					0x0020
++#define PM_PLL1					0x0024
++#define PM_IER					0x0040
++#define PM_IDR					0x0044
++#define PM_IMR					0x0048
++#define PM_ISR					0x004c
++#define PM_ICR					0x0050
++#define PM_GCCTRL(x)				(0x0060 + 4 * (x))
++#define PM_RCAUSE				0x00c0
++
++/* Bitfields in CKSEL */
++#define PM_CPUSEL_OFFSET			0
++#define PM_CPUSEL_SIZE				3
++#define PM_CPUDIV_OFFSET			7
++#define PM_CPUDIV_SIZE				1
++#define PM_HSBSEL_OFFSET			8
++#define PM_HSBSEL_SIZE				3
++#define PM_HSBDIV_OFFSET			15
++#define PM_HSBDIV_SIZE				1
++#define PM_PBASEL_OFFSET			16
++#define PM_PBASEL_SIZE				3
++#define PM_PBADIV_OFFSET			23
++#define PM_PBADIV_SIZE				1
++#define PM_PBBSEL_OFFSET			24
++#define PM_PBBSEL_SIZE				3
++#define PM_PBBDIV_OFFSET			31
++#define PM_PBBDIV_SIZE				1
++
++/* Bitfields in PLL0 */
++#define PM_PLLEN_OFFSET				0
++#define PM_PLLEN_SIZE				1
++#define PM_PLLOSC_OFFSET			1
++#define PM_PLLOSC_SIZE				1
++#define PM_PLLOPT_OFFSET			2
++#define PM_PLLOPT_SIZE				3
++#define PM_PLLDIV_OFFSET			8
++#define PM_PLLDIV_SIZE				8
++#define PM_PLLMUL_OFFSET			16
++#define PM_PLLMUL_SIZE				8
++#define PM_PLLCOUNT_OFFSET			24
++#define PM_PLLCOUNT_SIZE			6
++#define PM_PLLTEST_OFFSET			31
++#define PM_PLLTEST_SIZE				1
++
++/* Bitfields in ICR */
++#define PM_LOCK0_OFFSET				0
++#define PM_LOCK0_SIZE				1
++#define PM_LOCK1_OFFSET				1
++#define PM_LOCK1_SIZE				1
++#define PM_WAKE_OFFSET				2
++#define PM_WAKE_SIZE				1
++#define PM_CKRDY_OFFSET				5
++#define PM_CKRDY_SIZE				1
++#define PM_MSKRDY_OFFSET			6
++#define PM_MSKRDY_SIZE				1
++
++/* Bitfields in GCCTRL0 */
++#define PM_OSCSEL_OFFSET			0
++#define PM_OSCSEL_SIZE				1
++#define PM_PLLSEL_OFFSET			1
++#define PM_PLLSEL_SIZE				1
++#define PM_CEN_OFFSET				2
++#define PM_CEN_SIZE				1
++#define PM_DIVEN_OFFSET				4
++#define PM_DIVEN_SIZE				1
++#define PM_DIV_OFFSET				8
++#define PM_DIV_SIZE				8
++
++/* Bitfields in RCAUSE */
++#define PM_POR_OFFSET				0
++#define PM_POR_SIZE				1
++#define PM_EXT_OFFSET				2
++#define PM_EXT_SIZE				1
++#define PM_WDT_OFFSET				3
++#define PM_WDT_SIZE				1
++#define PM_NTAE_OFFSET				4
++#define PM_NTAE_SIZE				1
++
++/* Bit manipulation macros */
++#define PM_BIT(name)					\
++	(1 << PM_##name##_OFFSET)
++#define PM_BF(name,value)				\
++	(((value) & ((1 << PM_##name##_SIZE) - 1))	\
++	 << PM_##name##_OFFSET)
++#define PM_BFEXT(name,value)				\
++	(((value) >> PM_##name##_OFFSET)		\
++	 & ((1 << PM_##name##_SIZE) - 1))
++#define PM_BFINS(name,value,old)\
++	(((old) & ~(((1 << PM_##name##_SIZE) - 1)	\
++		    << PM_##name##_OFFSET))		\
++	 | PM_BF(name,value))
++
++/* Register access macros */
++#define pm_readl(reg)							\
++	__raw_readl((void __iomem *)AT32_PM_BASE + PM_##reg)
++#define pm_writel(reg,value)						\
++	__raw_writel((value), (void __iomem *)AT32_PM_BASE + PM_##reg)
++
++#endif /* __ARCH_AVR32_MACH_AT32AP_PM_H__ */
+Index: linux-2.6.22.1/arch/avr32/mach-at32ap/sm.h
+===================================================================
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/sm.h	(revision 1)
++++ linux-2.6.22.1/arch/avr32/mach-at32ap/sm.h	(arbetskopia)
+@@ -1,242 +0,0 @@
+-/*
+- * Register definitions for SM
+- *
+- * System Manager
+- */
+-#ifndef __ASM_AVR32_SM_H__
+-#define __ASM_AVR32_SM_H__
+-
+-/* SM register offsets */
+-#define SM_PM_MCCTRL                            0x0000
+-#define SM_PM_CKSEL                             0x0004
+-#define SM_PM_CPU_MASK                          0x0008
+-#define SM_PM_HSB_MASK                          0x000c
+-#define SM_PM_PBA_MASK                         0x0010
+-#define SM_PM_PBB_MASK                         0x0014
+-#define SM_PM_PLL0                              0x0020
+-#define SM_PM_PLL1                              0x0024
+-#define SM_PM_VCTRL                             0x0030
+-#define SM_PM_VMREF                             0x0034
+-#define SM_PM_VMV                               0x0038
+-#define SM_PM_IER                               0x0040
+-#define SM_PM_IDR                               0x0044
+-#define SM_PM_IMR                               0x0048
+-#define SM_PM_ISR                               0x004c
+-#define SM_PM_ICR                               0x0050
+-#define SM_PM_GCCTRL                            0x0060
+-#define SM_RTC_CTRL                             0x0080
+-#define SM_RTC_VAL                              0x0084
+-#define SM_RTC_TOP                              0x0088
+-#define SM_RTC_IER                              0x0090
+-#define SM_RTC_IDR                              0x0094
+-#define SM_RTC_IMR                              0x0098
+-#define SM_RTC_ISR                              0x009c
+-#define SM_RTC_ICR                              0x00a0
+-#define SM_WDT_CTRL                             0x00b0
+-#define SM_WDT_CLR                              0x00b4
+-#define SM_WDT_EXT                              0x00b8
+-#define SM_RC_RCAUSE                            0x00c0
+-#define SM_EIM_IER                              0x0100
+-#define SM_EIM_IDR                              0x0104
+-#define SM_EIM_IMR                              0x0108
+-#define SM_EIM_ISR                              0x010c
+-#define SM_EIM_ICR                              0x0110
+-#define SM_EIM_MODE                             0x0114
+-#define SM_EIM_EDGE                             0x0118
+-#define SM_EIM_LEVEL                            0x011c
+-#define SM_EIM_TEST                             0x0120
+-#define SM_EIM_NMIC                             0x0124
+-
+-/* Bitfields in PM_MCCTRL */
+-
+-/* Bitfields in PM_CKSEL */
+-#define SM_CPUSEL_OFFSET                        0
+-#define SM_CPUSEL_SIZE                          3
+-#define SM_CPUDIV_OFFSET                        7
+-#define SM_CPUDIV_SIZE                          1
+-#define SM_HSBSEL_OFFSET                        8
+-#define SM_HSBSEL_SIZE                          3
+-#define SM_HSBDIV_OFFSET                        15
+-#define SM_HSBDIV_SIZE                          1
+-#define SM_PBASEL_OFFSET                       16
+-#define SM_PBASEL_SIZE                         3
+-#define SM_PBADIV_OFFSET                       23
+-#define SM_PBADIV_SIZE                         1
+-#define SM_PBBSEL_OFFSET                       24
+-#define SM_PBBSEL_SIZE                         3
+-#define SM_PBBDIV_OFFSET                       31
+-#define SM_PBBDIV_SIZE                         1
+-
+-/* Bitfields in PM_CPU_MASK */
+-
+-/* Bitfields in PM_HSB_MASK */
+-
+-/* Bitfields in PM_PBA_MASK */
+-
+-/* Bitfields in PM_PBB_MASK */
+-
+-/* Bitfields in PM_PLL0 */
+-#define SM_PLLEN_OFFSET                         0
+-#define SM_PLLEN_SIZE                           1
+-#define SM_PLLOSC_OFFSET                        1
+-#define SM_PLLOSC_SIZE                          1
+-#define SM_PLLOPT_OFFSET                        2
+-#define SM_PLLOPT_SIZE                          3
+-#define SM_PLLDIV_OFFSET                        8
+-#define SM_PLLDIV_SIZE                          8
+-#define SM_PLLMUL_OFFSET                        16
+-#define SM_PLLMUL_SIZE                          8
+-#define SM_PLLCOUNT_OFFSET                      24
+-#define SM_PLLCOUNT_SIZE                        6
+-#define SM_PLLTEST_OFFSET                       31
+-#define SM_PLLTEST_SIZE                         1
+-
+-/* Bitfields in PM_PLL1 */
+-
+-/* Bitfields in PM_VCTRL */
+-#define SM_VAUTO_OFFSET                         0
+-#define SM_VAUTO_SIZE                           1
+-#define SM_PM_VCTRL_VAL_OFFSET                  8
+-#define SM_PM_VCTRL_VAL_SIZE                    7
+-
+-/* Bitfields in PM_VMREF */
+-#define SM_REFSEL_OFFSET                        0
+-#define SM_REFSEL_SIZE                          4
+-
+-/* Bitfields in PM_VMV */
+-#define SM_PM_VMV_VAL_OFFSET                    0
+-#define SM_PM_VMV_VAL_SIZE                      8
+-
+-/* Bitfields in PM_IER */
+-
+-/* Bitfields in PM_IDR */
+-
+-/* Bitfields in PM_IMR */
+-
+-/* Bitfields in PM_ISR */
+-
+-/* Bitfields in PM_ICR */
+-#define SM_LOCK0_OFFSET                         0
+-#define SM_LOCK0_SIZE                           1
+-#define SM_LOCK1_OFFSET                         1
+-#define SM_LOCK1_SIZE                           1
+-#define SM_WAKE_OFFSET                          2
+-#define SM_WAKE_SIZE                            1
+-#define SM_VOK_OFFSET                           3
+-#define SM_VOK_SIZE                             1
+-#define SM_VMRDY_OFFSET                         4
+-#define SM_VMRDY_SIZE                           1
+-#define SM_CKRDY_OFFSET                         5
+-#define SM_CKRDY_SIZE                           1
+-
+-/* Bitfields in PM_GCCTRL */
+-#define SM_OSCSEL_OFFSET                        0
+-#define SM_OSCSEL_SIZE                          1
+-#define SM_PLLSEL_OFFSET                        1
+-#define SM_PLLSEL_SIZE                          1
+-#define SM_CEN_OFFSET                           2
+-#define SM_CEN_SIZE                             1
+-#define SM_CPC_OFFSET                           3
+-#define SM_CPC_SIZE                             1
+-#define SM_DIVEN_OFFSET                         4
+-#define SM_DIVEN_SIZE                           1
+-#define SM_DIV_OFFSET                           8
+-#define SM_DIV_SIZE                             8
+-
+-/* Bitfields in RTC_CTRL */
+-#define SM_PCLR_OFFSET                          1
+-#define SM_PCLR_SIZE                            1
+-#define SM_TOPEN_OFFSET                         2
+-#define SM_TOPEN_SIZE                           1
+-#define SM_CLKEN_OFFSET                         3
+-#define SM_CLKEN_SIZE                           1
+-#define SM_PSEL_OFFSET                          8
+-#define SM_PSEL_SIZE                            16
+-
+-/* Bitfields in RTC_VAL */
+-#define SM_RTC_VAL_VAL_OFFSET                   0
+-#define SM_RTC_VAL_VAL_SIZE                     31
+-
+-/* Bitfields in RTC_TOP */
+-#define SM_RTC_TOP_VAL_OFFSET                   0
+-#define SM_RTC_TOP_VAL_SIZE                     32
+-
+-/* Bitfields in RTC_IER */
+-
+-/* Bitfields in RTC_IDR */
+-
+-/* Bitfields in RTC_IMR */
+-
+-/* Bitfields in RTC_ISR */
+-
+-/* Bitfields in RTC_ICR */
+-#define SM_TOPI_OFFSET                          0
+-#define SM_TOPI_SIZE                            1
+-
+-/* Bitfields in WDT_CTRL */
+-#define SM_KEY_OFFSET                           24
+-#define SM_KEY_SIZE                             8
+-
+-/* Bitfields in WDT_CLR */
+-
+-/* Bitfields in WDT_EXT */
+-
+-/* Bitfields in RC_RCAUSE */
+-#define SM_POR_OFFSET                           0
+-#define SM_POR_SIZE                             1
+-#define SM_BOD_OFFSET                           1
+-#define SM_BOD_SIZE                             1
+-#define SM_EXT_OFFSET                           2
+-#define SM_EXT_SIZE                             1
+-#define SM_WDT_OFFSET                           3
+-#define SM_WDT_SIZE                             1
+-#define SM_NTAE_OFFSET                          4
+-#define SM_NTAE_SIZE                            1
+-#define SM_SERP_OFFSET                          5
+-#define SM_SERP_SIZE                            1
+-
+-/* Bitfields in EIM_IER */
+-
+-/* Bitfields in EIM_IDR */
+-
+-/* Bitfields in EIM_IMR */
+-
+-/* Bitfields in EIM_ISR */
+-
+-/* Bitfields in EIM_ICR */
+-
+-/* Bitfields in EIM_MODE */
+-
+-/* Bitfields in EIM_EDGE */
+-#define SM_INT0_OFFSET                          0
+-#define SM_INT0_SIZE                            1
+-#define SM_INT1_OFFSET                          1
+-#define SM_INT1_SIZE                            1
+-#define SM_INT2_OFFSET                          2
+-#define SM_INT2_SIZE                            1
+-#define SM_INT3_OFFSET                          3
+-#define SM_INT3_SIZE                            1
+-
+-/* Bitfields in EIM_LEVEL */
+-
+-/* Bitfields in EIM_TEST */
+-#define SM_TESTEN_OFFSET                        31
+-#define SM_TESTEN_SIZE                          1
+-
+-/* Bitfields in EIM_NMIC */
+-#define SM_EN_OFFSET                            0
+-#define SM_EN_SIZE                              1
+-
+-/* Bit manipulation macros */
+-#define SM_BIT(name)                            (1 << SM_##name##_OFFSET)
+-#define SM_BF(name,value)                       (((value) & ((1 << SM_##name##_SIZE) - 1)) << SM_##name##_OFFSET)
+-#define SM_BFEXT(name,value)                    (((value) >> SM_##name##_OFFSET) & ((1 << SM_##name##_SIZE) - 1))
+-#define SM_BFINS(name,value,old)                (((old) & ~(((1 << SM_##name##_SIZE) - 1) << SM_##name##_OFFSET)) | SM_BF(name,value))
+-
+-/* Register access macros */
+-#define sm_readl(port,reg)					\
+-	__raw_readl((port)->regs + SM_##reg)
+-#define sm_writel(port,reg,value)				\
+-	__raw_writel((value), (port)->regs + SM_##reg)
+-
+-#endif /* __ASM_AVR32_SM_H__ */
+Index: linux-2.6.22.1/arch/avr32/mach-at32ap/pio.c
+===================================================================
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/pio.c	(revision 1)
++++ linux-2.6.22.1/arch/avr32/mach-at32ap/pio.c	(arbetskopia)
+@@ -158,6 +158,82 @@
+ 	dump_stack();
+ }
+ 
++#ifdef CONFIG_GPIO_DEV
++
++/* Gang allocators and accessors; used by the GPIO /dev driver */
++int at32_gpio_port_is_valid(unsigned int port)
++{
++	return port < MAX_NR_PIO_DEVICES && pio_dev[port].regs != NULL;
++}
++
++int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask)
++{
++	struct pio_device *pio;
++	u32 old, new;
++
++	pio = &pio_dev[port];
++	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs || (oe_mask & ~pins));
++
++	/* Try to allocate the pins */
++	do {
++		old = pio->pinmux_mask;
++		if (old & pins)
++			return -EBUSY;
++
++		new = old | pins;
++	} while (cmpxchg(&pio->pinmux_mask, old, new) != old);
++
++	/* That went well, now configure the port */
++	pio_writel(pio, OER, oe_mask);
++	pio_writel(pio, PER, pins);
++
++	return 0;
++}
++
++void at32_deselect_pins(unsigned int port, u32 pins)
++{
++	struct pio_device *pio;
++	u32 old, new;
++
++	pio = &pio_dev[port];
++	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++	/* Return to a "safe" mux configuration */
++	pio_writel(pio, PUER, pins);
++	pio_writel(pio, ODR, pins);
++
++	/* Deallocate the pins */
++	do {
++		old = pio->pinmux_mask;
++		new = old & ~pins;
++	} while (cmpxchg(&pio->pinmux_mask, old, new) != old);
++}
++
++u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins)
++{
++	struct pio_device *pio;
++
++	pio = &pio_dev[port];
++	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++	return pio_readl(pio, PDSR) & pins;
++}
++
++void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask)
++{
++	struct pio_device *pio;
++
++	pio = &pio_dev[port];
++	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++	/* No atomic updates for now... */
++	pio_writel(pio, CODR, ~value & mask);
++	pio_writel(pio, SODR, value & mask);
++}
++
++#endif /* CONFIG_GPIO_DEV */
++
++
+ /*--------------------------------------------------------------------------*/
+ 
+ /* GPIO API */
+Index: linux-2.6.22.1/arch/avr32/mach-at32ap/at32ap.c
+===================================================================
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/at32ap.c	(revision 1)
++++ linux-2.6.22.1/arch/avr32/mach-at32ap/at32ap.c	(arbetskopia)
+@@ -11,41 +11,10 @@
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ 
+-#include <asm/io.h>
+-
+ #include <asm/arch/init.h>
+-#include <asm/arch/sm.h>
+ 
+-struct at32_sm system_manager;
+-
+-static int __init at32_sm_init(void)
+-{
+-	struct resource *regs;
+-	struct at32_sm *sm = &system_manager;
+-	int ret = -ENXIO;
+-
+-	regs = platform_get_resource(&at32_sm_device, IORESOURCE_MEM, 0);
+-	if (!regs)
+-		goto fail;
+-
+-	spin_lock_init(&sm->lock);
+-	sm->pdev = &at32_sm_device;
+-
+-	ret = -ENOMEM;
+-	sm->regs = ioremap(regs->start, regs->end - regs->start + 1);
+-	if (!sm->regs)
+-		goto fail;
+-
+-	return 0;
+-
+-fail:
+-	printk(KERN_ERR "Failed to initialize System Manager: %d\n", ret);
+-	return ret;
+-}
+-
+ void __init setup_platform(void)
+ {
+-	at32_sm_init();
+ 	at32_clock_init();
+ 	at32_portmux_init();
+ }
+Index: linux-2.6.22.1/arch/avr32/mach-at32ap/Makefile
+===================================================================
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/Makefile	(revision 1)
++++ linux-2.6.22.1/arch/avr32/mach-at32ap/Makefile	(arbetskopia)
+@@ -1,3 +1,5 @@
+ obj-y				+= at32ap.o clock.o intc.o extint.o pio.o hsmc.o
+ obj-$(CONFIG_CPU_AT32AP7000)	+= at32ap7000.o
+ obj-$(CONFIG_CPU_AT32AP7000)	+= time-tc.o
++obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
++obj-$(CONFIG_GPIO_DEV)		+= gpio-dev.o
+Index: linux-2.6.22.1/arch/avr32/Kconfig
+===================================================================
+--- linux-2.6.22.1/arch/avr32/Kconfig	(revision 1)
++++ linux-2.6.22.1/arch/avr32/Kconfig	(arbetskopia)
+@@ -113,6 +113,13 @@
  	bool "ATNGW100 Network Gateway"
  endchoice
  
@@ -34,7 +11029,7 @@ index 3ec7658..ec6c7c5 100644
  choice
  	prompt "Boot loader type"
  	default LOADER_U_BOOT
-@@ -171,6 +178,10 @@ config OWNERSHIP_TRACE
+@@ -171,6 +178,10 @@
  	  enabling Nexus-compliant debuggers to keep track of the PID of the
  	  currently executing task.
  
@@ -45,7 +11040,7 @@ index 3ec7658..ec6c7c5 100644
  # FPU emulation goes here
  
  source "kernel/Kconfig.hz"
-@@ -185,6 +196,27 @@ config CMDLINE
+@@ -185,6 +196,27 @@
  
  endmenu
  
@@ -73,23 +11068,935 @@ index 3ec7658..ec6c7c5 100644
  menu "Bus options"
  
  config PCI
-diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
-index dc6bc01..eb72198 100644
---- a/arch/avr32/Makefile
-+++ b/arch/avr32/Makefile
-@@ -31,6 +31,7 @@ core-$(CONFIG_BOARD_ATNGW100)		+= arch/avr32/boards/atngw100/
- core-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/
- core-y					+= arch/avr32/kernel/
- core-y					+= arch/avr32/mm/
-+drivers-y				+= arch/avr32/drivers/
- libs-y					+= arch/avr32/lib/
+Index: linux-2.6.22.1/arch/avr32/configs/atngw100_defconfig
+===================================================================
+--- linux-2.6.22.1/arch/avr32/configs/atngw100_defconfig	(revision 1)
++++ linux-2.6.22.1/arch/avr32/configs/atngw100_defconfig	(arbetskopia)
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.22-rc5
+-# Sat Jun 23 15:40:05 2007
++# Linux kernel version: 2.6.22.atmel.1
++# Thu Jul 12 17:49:20 2007
+ #
+ CONFIG_AVR32=y
+ CONFIG_GENERIC_GPIO=y
+@@ -114,6 +114,7 @@
+ CONFIG_CPU_AT32AP7000=y
+ # CONFIG_BOARD_ATSTK1000 is not set
+ CONFIG_BOARD_ATNGW100=y
++# CONFIG_BOARD_ATNGW100_I2C_GPIO is not set
+ CONFIG_LOADER_U_BOOT=y
  
- archincdir-$(CONFIG_PLATFORM_AT32AP)	:= arch-at32ap
-diff --git a/arch/avr32/boards/atngw100/Kconfig b/arch/avr32/boards/atngw100/Kconfig
-new file mode 100644
-index 0000000..5d922df
---- /dev/null
-+++ b/arch/avr32/boards/atngw100/Kconfig
+ #
+@@ -122,6 +123,7 @@
+ # CONFIG_AP7000_32_BIT_SMC is not set
+ CONFIG_AP7000_16_BIT_SMC=y
+ # CONFIG_AP7000_8_BIT_SMC is not set
++CONFIG_GPIO_DEV=y
+ CONFIG_LOAD_ADDRESS=0x10000000
+ CONFIG_ENTRY_ADDRESS=0x90000000
+ CONFIG_PHYS_OFFSET=0x10000000
+@@ -145,6 +147,7 @@
+ # CONFIG_RESOURCES_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=0
+ # CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_DW_DMAC=y
+ # CONFIG_HZ_100 is not set
+ CONFIG_HZ_250=y
+ # CONFIG_HZ_300 is not set
+@@ -153,6 +156,27 @@
+ CONFIG_CMDLINE=""
+ 
+ #
++# Power managment options
++#
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++CONFIG_CPU_FREQ_STAT=m
++# CONFIG_CPU_FREQ_STAT_DETAILS is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++CONFIG_CPU_FREQ_GOV_POWERSAVE=y
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
+ # Bus options
+ #
+ # CONFIG_ARCH_SUPPORTS_MSI is not set
+@@ -187,13 +211,8 @@
+ # CONFIG_NET_KEY_MIGRATE is not set
+ CONFIG_INET=y
+ CONFIG_IP_MULTICAST=y
+-CONFIG_IP_ADVANCED_ROUTER=y
+-CONFIG_ASK_IP_FIB_HASH=y
+-# CONFIG_IP_FIB_TRIE is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
+ CONFIG_IP_FIB_HASH=y
+-# CONFIG_IP_MULTIPLE_TABLES is not set
+-# CONFIG_IP_ROUTE_MULTIPATH is not set
+-# CONFIG_IP_ROUTE_VERBOSE is not set
+ CONFIG_IP_PNP=y
+ CONFIG_IP_PNP_DHCP=y
+ # CONFIG_IP_PNP_BOOTP is not set
+@@ -240,6 +259,7 @@
+ # CONFIG_NETWORK_SECMARK is not set
+ CONFIG_NETFILTER=y
+ # CONFIG_NETFILTER_DEBUG is not set
++CONFIG_BRIDGE_NETFILTER=y
+ 
+ #
+ # Core Netfilter Configuration
+@@ -284,6 +304,7 @@
+ CONFIG_NETFILTER_XT_MATCH_MARK=m
+ CONFIG_NETFILTER_XT_MATCH_POLICY=m
+ CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
++# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+ CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+ CONFIG_NETFILTER_XT_MATCH_REALM=m
+@@ -359,13 +380,19 @@
+ CONFIG_IP6_NF_MANGLE=m
+ CONFIG_IP6_NF_TARGET_HL=m
+ CONFIG_IP6_NF_RAW=m
++
++#
++# Bridge: Netfilter Configuration
++#
++# CONFIG_BRIDGE_NF_EBTABLES is not set
+ # CONFIG_IP_DCCP is not set
+ # CONFIG_IP_SCTP is not set
+ # CONFIG_TIPC is not set
+ # CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
++CONFIG_BRIDGE=m
+ CONFIG_VLAN_8021Q=m
+ # CONFIG_DECNET is not set
++CONFIG_LLC=m
+ # CONFIG_LLC2 is not set
+ # CONFIG_IPX is not set
+ # CONFIG_ATALK is not set
+@@ -521,7 +548,6 @@
+ #
+ # Misc devices
+ #
+-# CONFIG_BLINK is not set
+ # CONFIG_IDE is not set
+ 
+ #
+@@ -545,13 +571,26 @@
+ # CONFIG_BONDING is not set
+ # CONFIG_EQUALIZER is not set
+ CONFIG_TUN=m
+-# CONFIG_PHYLIB is not set
++CONFIG_PHYLIB=y
+ 
+ #
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_FIXED_PHY is not set
++
++#
+ # Ethernet (10 or 100Mbit)
+ #
+ CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
++# CONFIG_MII is not set
+ CONFIG_MACB=y
+ # CONFIG_NETDEV_1000 is not set
+ # CONFIG_NETDEV_10000 is not set
+@@ -625,7 +664,15 @@
+ # IPMI
+ #
+ # CONFIG_IPMI_HANDLER is not set
+-# CONFIG_WATCHDOG is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++CONFIG_AT32AP700X_WDT_TIMEOUT=2
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_RTC is not set
+ # CONFIG_GEN_RTC is not set
+@@ -636,9 +683,44 @@
+ # TPM devices
+ #
+ # CONFIG_TCG_TPM is not set
+-# CONFIG_I2C is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
+ 
+ #
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=m
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_ATMELTWI=m
++CONFIG_I2C_ATMELTWI_BAUDRATE=100000
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
+ # SPI support
+ #
+ CONFIG_SPI=y
+@@ -655,7 +737,7 @@
+ # SPI Protocol Masters
+ #
+ # CONFIG_SPI_AT25 is not set
+-# CONFIG_SPI_SPIDEV is not set
++CONFIG_SPI_SPIDEV=m
+ 
+ #
+ # Dallas's 1-wire bus
+@@ -706,21 +788,59 @@
+ #
+ # USB Gadget Support
+ #
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
+ 
+ #
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++
++#
++# MMC/SD Host Controller Drivers
++#
++CONFIG_MMC_ATMELMCI=y
++
++#
+ # LED devices
+ #
+-# CONFIG_NEW_LEDS is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
+ 
+ #
+ # LED drivers
+ #
++CONFIG_LEDS_GPIO=y
+ 
+ #
+ # LED Triggers
+ #
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=y
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+ 
+ #
+ # InfiniBand support
+@@ -733,9 +853,53 @@
+ #
+ # Real Time Clock
+ #
+-# CONFIG_RTC_CLASS is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
+ 
+ #
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT32AP700X=y
++
++#
+ # DMA Engine support
+ #
+ # CONFIG_DMA_ENGINE is not set
+@@ -767,7 +931,8 @@
+ # CONFIG_OCFS2_FS is not set
+ # CONFIG_MINIX_FS is not set
+ # CONFIG_ROMFS_FS is not set
+-# CONFIG_INOTIFY is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
+ # CONFIG_QUOTA is not set
+ # CONFIG_DNOTIFY is not set
+ # CONFIG_AUTOFS_FS is not set
+@@ -922,7 +1087,7 @@
+ CONFIG_ENABLE_MUST_CHECK=y
+ CONFIG_MAGIC_SYSRQ=y
+ # CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
++CONFIG_DEBUG_FS=y
+ # CONFIG_HEADERS_CHECK is not set
+ CONFIG_DEBUG_KERNEL=y
+ # CONFIG_DEBUG_SHIRQ is not set
+Index: linux-2.6.22.1/arch/avr32/configs/atstk1002_defconfig
+===================================================================
+--- linux-2.6.22.1/arch/avr32/configs/atstk1002_defconfig	(revision 1)
++++ linux-2.6.22.1/arch/avr32/configs/atstk1002_defconfig	(arbetskopia)
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.22-rc5
+-# Sat Jun 23 15:32:08 2007
++# Linux kernel version: 2.6.22.atmel.2
++# Thu Jul 19 13:46:47 2007
+ #
+ CONFIG_AVR32=y
+ CONFIG_GENERIC_GPIO=y
+@@ -80,10 +80,10 @@
+ #
+ CONFIG_MODULES=y
+ CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
++CONFIG_MODULE_FORCE_UNLOAD=y
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
+-# CONFIG_KMOD is not set
++CONFIG_KMOD=y
+ 
+ #
+ # Block layer
+@@ -99,12 +99,12 @@
+ CONFIG_IOSCHED_NOOP=y
+ # CONFIG_IOSCHED_AS is not set
+ # CONFIG_IOSCHED_DEADLINE is not set
+-# CONFIG_IOSCHED_CFQ is not set
++CONFIG_IOSCHED_CFQ=y
+ # CONFIG_DEFAULT_AS is not set
+ # CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-CONFIG_DEFAULT_NOOP=y
+-CONFIG_DEFAULT_IOSCHED="noop"
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
+ 
+ #
+ # System Type and features
+@@ -117,6 +117,11 @@
+ CONFIG_BOARD_ATSTK1002=y
+ CONFIG_BOARD_ATSTK1000=y
+ # CONFIG_BOARD_ATNGW100 is not set
++# CONFIG_BOARD_ATSTK1002_CUSTOM is not set
++# CONFIG_BOARD_ATSTK1002_SPI1 is not set
++# CONFIG_BOARD_ATSTK1002_J2_LED is not set
++# CONFIG_BOARD_ATSTK1002_J2_LED8 is not set
++# CONFIG_BOARD_ATSTK1002_J2_RGB is not set
+ CONFIG_LOADER_U_BOOT=y
+ 
+ #
+@@ -125,6 +130,7 @@
+ # CONFIG_AP7000_32_BIT_SMC is not set
+ CONFIG_AP7000_16_BIT_SMC=y
+ # CONFIG_AP7000_8_BIT_SMC is not set
++CONFIG_GPIO_DEV=y
+ CONFIG_LOAD_ADDRESS=0x10000000
+ CONFIG_ENTRY_ADDRESS=0x90000000
+ CONFIG_PHYS_OFFSET=0x10000000
+@@ -148,6 +154,7 @@
+ # CONFIG_RESOURCES_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=0
+ # CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_DW_DMAC=y
+ # CONFIG_HZ_100 is not set
+ CONFIG_HZ_250=y
+ # CONFIG_HZ_300 is not set
+@@ -156,6 +163,27 @@
+ CONFIG_CMDLINE=""
+ 
+ #
++# Power managment options
++#
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++CONFIG_CPU_FREQ_STAT=m
++# CONFIG_CPU_FREQ_STAT_DETAILS is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++CONFIG_CPU_FREQ_GOV_POWERSAVE=y
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
+ # Bus options
+ #
+ # CONFIG_ARCH_SUPPORTS_MSI is not set
+@@ -327,6 +355,8 @@
+ #
+ # Self-contained MTD device drivers
+ #
++CONFIG_MTD_DATAFLASH=m
++# CONFIG_MTD_M25P80 is not set
+ # CONFIG_MTD_SLRAM is not set
+ # CONFIG_MTD_PHRAM is not set
+ # CONFIG_MTD_MTDRAM is not set
+@@ -373,7 +403,7 @@
+ #
+ # Misc devices
+ #
+-# CONFIG_BLINK is not set
++CONFIG_ATMEL_SSC=m
+ # CONFIG_IDE is not set
+ 
+ #
+@@ -397,13 +427,26 @@
+ # CONFIG_BONDING is not set
+ # CONFIG_EQUALIZER is not set
+ CONFIG_TUN=m
+-# CONFIG_PHYLIB is not set
++CONFIG_PHYLIB=y
+ 
+ #
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++CONFIG_LXT_PHY=y
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_FIXED_PHY is not set
++
++#
+ # Ethernet (10 or 100Mbit)
+ #
+ CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
++# CONFIG_MII is not set
+ CONFIG_MACB=y
+ # CONFIG_NETDEV_1000 is not set
+ # CONFIG_NETDEV_10000 is not set
+@@ -443,9 +486,44 @@
+ #
+ # Input device support
+ #
+-# CONFIG_INPUT is not set
++CONFIG_INPUT=m
++# CONFIG_INPUT_FF_MEMLESS is not set
++CONFIG_INPUT_POLLDEV=m
+ 
+ #
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=m
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_TSDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++CONFIG_KEYBOARD_GPIO=m
++CONFIG_INPUT_MOUSE=y
++# CONFIG_MOUSE_PS2 is not set
++# CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_VSXXXAA is not set
++CONFIG_MOUSE_GPIO=m
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
+ # Hardware I/O ports
+ #
+ # CONFIG_SERIO is not set
+@@ -477,7 +555,15 @@
+ # IPMI
+ #
+ # CONFIG_IPMI_HANDLER is not set
+-# CONFIG_WATCHDOG is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++CONFIG_AT32AP700X_WDT_TIMEOUT=2
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_RTC is not set
+ # CONFIG_GEN_RTC is not set
+@@ -488,15 +574,63 @@
+ # TPM devices
+ #
+ # CONFIG_TCG_TPM is not set
+-# CONFIG_I2C is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
+ 
+ #
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=m
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_ATMELTWI=m
++CONFIG_I2C_ATMELTWI_BAUDRATE=100000
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
+ # SPI support
+ #
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
+ 
+ #
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++CONFIG_SPI_SPIDEV=m
++
++#
+ # Dallas's 1-wire bus
+ #
+ # CONFIG_W1 is not set
+@@ -517,21 +651,93 @@
+ #
+ # Graphics support
+ #
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_CLASS_DEVICE=y
++CONFIG_LCD_LTV350QV=y
++# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+ 
+ #
+ # Display device support
+ #
+ # CONFIG_DISPLAY_SUPPORT is not set
+ # CONFIG_VGASTATE is not set
+-# CONFIG_FB is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_SYS_FOPS is not set
++CONFIG_FB_DEFERRED_IO=y
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
+ 
+ #
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_ATMEL=y
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_LOGO is not set
++
++#
+ # Sound
+ #
+-# CONFIG_SOUND is not set
++CONFIG_SOUND=m
+ 
+ #
++# Advanced Linux Sound Architecture
++#
++CONFIG_SND=m
++CONFIG_SND_TIMER=m
++CONFIG_SND_PCM=m
++# CONFIG_SND_SEQUENCER is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_PCM_OSS_PLUGINS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++# CONFIG_SND_SUPPORT_OLD_API is not set
++CONFIG_SND_VERBOSE_PROCFS=y
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++
++#
++# Generic devices
++#
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
++
++#
++# SPI devices
++#
++CONFIG_SND_AT73C213=m
++CONFIG_SND_AT73C213_TARGET_BITRATE=48000
++
++#
++# System on Chip audio support
++#
++# CONFIG_SND_SOC is not set
++
++#
++# Open Sound System
++#
++# CONFIG_SOUND_PRIME is not set
++
++#
++# HID Devices
++#
++# CONFIG_HID is not set
++
++#
+ # USB support
+ #
+ # CONFIG_USB_ARCH_HAS_HCD is not set
+@@ -545,21 +751,59 @@
+ #
+ # USB Gadget Support
+ #
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
+ 
+ #
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++
++#
++# MMC/SD Host Controller Drivers
++#
++CONFIG_MMC_ATMELMCI=y
++
++#
+ # LED devices
+ #
+-# CONFIG_NEW_LEDS is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=m
+ 
+ #
+ # LED drivers
+ #
++CONFIG_LEDS_GPIO=m
+ 
+ #
+ # LED Triggers
+ #
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=m
++CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+ 
+ #
+ # InfiniBand support
+@@ -572,9 +816,52 @@
+ #
+ # Real Time Clock
+ #
+-# CONFIG_RTC_CLASS is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++# CONFIG_RTC_HCTOSYS is not set
++# CONFIG_RTC_DEBUG is not set
+ 
+ #
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT32AP700X=y
++
++#
+ # DMA Engine support
+ #
+ # CONFIG_DMA_ENGINE is not set
+@@ -590,11 +877,14 @@
+ #
+ # File systems
+ #
+-CONFIG_EXT2_FS=m
++CONFIG_EXT2_FS=y
+ # CONFIG_EXT2_FS_XATTR is not set
+ # CONFIG_EXT2_FS_XIP is not set
+-# CONFIG_EXT3_FS is not set
++CONFIG_EXT3_FS=y
++# CONFIG_EXT3_FS_XATTR is not set
+ # CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+ # CONFIG_FS_POSIX_ACL is not set
+@@ -609,7 +899,7 @@
+ # CONFIG_DNOTIFY is not set
+ # CONFIG_AUTOFS_FS is not set
+ # CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
++CONFIG_FUSE_FS=m
+ 
+ #
+ # CD-ROM/DVD Filesystems
+@@ -638,7 +928,7 @@
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+ CONFIG_RAMFS=y
+-CONFIG_CONFIGFS_FS=m
++CONFIG_CONFIGFS_FS=y
+ 
+ #
+ # Miscellaneous filesystems
+@@ -683,8 +973,14 @@
+ # CONFIG_SUNRPC_BIND34 is not set
+ # CONFIG_RPCSEC_GSS_KRB5 is not set
+ # CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
++CONFIG_SMB_FS=m
++# CONFIG_SMB_NLS_DEFAULT is not set
++CONFIG_CIFS=m
++# CONFIG_CIFS_STATS is not set
++# CONFIG_CIFS_WEAK_PW_HASH is not set
++# CONFIG_CIFS_XATTR is not set
++# CONFIG_CIFS_DEBUG2 is not set
++# CONFIG_CIFS_EXPERIMENTAL is not set
+ # CONFIG_NCP_FS is not set
+ # CONFIG_CODA_FS is not set
+ # CONFIG_AFS_FS is not set
+Index: linux-2.6.22.1/arch/avr32/mm/dma-coherent.c
+===================================================================
+--- linux-2.6.22.1/arch/avr32/mm/dma-coherent.c	(revision 1)
++++ linux-2.6.22.1/arch/avr32/mm/dma-coherent.c	(arbetskopia)
+@@ -41,6 +41,13 @@
+ 	struct page *page, *free, *end;
+ 	int order;
+ 
++	/* Following is a work-around (a.k.a. hack) to prevent pages
++	 * with __GFP_COMP being passed to split_page() which cannot
++	 * handle them.  The real problem is that this flag probably
++	 * should be 0 on AVR32 as it is not supported on this
++	 * platform--see CONFIG_HUGETLB_PAGE. */
++	gfp &= ~(__GFP_COMP);
++
+ 	size = PAGE_ALIGN(size);
+ 	order = get_order(size);
+ 
+Index: linux-2.6.22.1/arch/avr32/boards/atngw100/Kconfig
+===================================================================
+--- linux-2.6.22.1/arch/avr32/boards/atngw100/Kconfig	(revision 0)
++++ linux-2.6.22.1/arch/avr32/boards/atngw100/Kconfig	(revision 0)
 @@ -0,0 +1,12 @@
 +# NGW100 customization
 +
@@ -103,10 +12010,10 @@ index 0000000..5d922df
 +
 +	  Choose 'Y' here if you're having i2c-related problems and
 +	  want to rule out the i2c bus driver.
-diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
-index 6c4dc0a..d649974 100644
---- a/arch/avr32/boards/atngw100/setup.c
-+++ b/arch/avr32/boards/atngw100/setup.c
+Index: linux-2.6.22.1/arch/avr32/boards/atngw100/setup.c
+===================================================================
+--- linux-2.6.22.1/arch/avr32/boards/atngw100/setup.c	(revision 1)
++++ linux-2.6.22.1/arch/avr32/boards/atngw100/setup.c	(arbetskopia)
 @@ -9,10 +9,12 @@
   */
  #include <linux/clk.h>
@@ -128,7 +12035,7 @@ index 6c4dc0a..d649974 100644
  
  /* Initialized by bootloader-specific startup code. */
  struct tag *bootloader_tags __initdata;
-@@ -39,6 +42,11 @@ static struct spi_board_info spi0_board_info[] __initdata = {
+@@ -39,6 +42,11 @@
  	},
  };
  
@@ -140,7 +12047,7 @@ index 6c4dc0a..d649974 100644
  /*
   * The next two functions should go away as the boot loader is
   * supposed to initialize the macb address registers with a valid
-@@ -100,8 +108,46 @@ void __init setup_board(void)
+@@ -100,8 +108,46 @@
  	at32_setup_serial_console(0);
  }
  
@@ -187,13 +12094,13 @@ index 6c4dc0a..d649974 100644
  	/*
  	 * ATNGW100 uses 16-bit SDRAM interface, so we don't need to
  	 * reserve any pins for it.
-@@ -115,6 +161,22 @@ static int __init atngw100_init(void)
+@@ -115,7 +161,23 @@
  	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
  
  	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
 +	at32_add_device_mci(0, &mci0_data);
 +	at32_add_device_usba(0, NULL);
-+
+ 
 +	for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
 +		at32_select_gpio(ngw_leds[i].gpio,
 +				AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
@@ -207,15 +12114,15 @@ index 6c4dc0a..d649974 100644
 +#else
 +	at32_add_device_twi(0);
 +#endif
- 
++
  	return 0;
  }
-diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
-new file mode 100644
-index 0000000..718578f
---- /dev/null
-+++ b/arch/avr32/boards/atstk1000/Kconfig
-@@ -0,0 +1,79 @@
+ postcore_initcall(atngw100_init);
+Index: linux-2.6.22.1/arch/avr32/boards/atstk1000/Kconfig
+===================================================================
+--- linux-2.6.22.1/arch/avr32/boards/atstk1000/Kconfig	(revision 0)
++++ linux-2.6.22.1/arch/avr32/boards/atstk1000/Kconfig	(revision 0)
+@@ -0,0 +1,95 @@
 +# STK1000 customization
 +
 +if BOARD_ATSTK1002
@@ -268,6 +12175,22 @@ index 0000000..718578f
 +	  GPIO lines and accessed through the J1 jumper block.  Say "y"
 +	  here to configure that SPI controller.
 +
++config BOARD_ATSTK1002_GPIO_MOUSE
++	bool "Configure gpio_mouse on GPIO J1 header"
++	depends on !BOARD_ATSTK1002_SW4_CUSTOM
++	help
++	  Enable gpio_mouse board configuration on GPIO 0 to 7. Connecting a
++	  10-pin flat cable from J1 (GPIO) to J25 (SWITCH) will let a user give
++	  mouse inputs using the the switches SW0 to SW7.
++
++	  SW0: right
++	  SW1: down
++	  SW2: up
++	  SW3: left
++	  SW5: right button
++	  SW6: middle button
++	  SW7: left button
++
 +config BOARD_ATSTK1002_J2_LED
 +	bool
 +	default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB
@@ -295,11 +12218,11 @@ index 0000000..718578f
 +endchoice
 +
 +endif	# stk 1002
-diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
-index e253e86..c958fd4 100644
---- a/arch/avr32/boards/atstk1000/atstk1002.c
-+++ b/arch/avr32/boards/atstk1000/atstk1002.c
-@@ -11,10 +11,12 @@
+Index: linux-2.6.22.1/arch/avr32/boards/atstk1000/atstk1002.c
+===================================================================
+--- linux-2.6.22.1/arch/avr32/boards/atstk1000/atstk1002.c	(revision 1)
++++ linux-2.6.22.1/arch/avr32/boards/atstk1000/atstk1002.c	(arbetskopia)
+@@ -11,10 +11,13 @@
  #include <linux/etherdevice.h>
  #include <linux/init.h>
  #include <linux/kernel.h>
@@ -309,10 +12232,11 @@ index e253e86..c958fd4 100644
  #include <linux/types.h>
  #include <linux/spi/spi.h>
 +#include <linux/spi/at73c213.h>
++#include <linux/gpio_mouse.h>
  
  #include <video/atmel_lcdc.h>
  
-@@ -27,16 +29,47 @@
+@@ -27,17 +30,48 @@
  
  #include "atstk1000.h"
  
@@ -337,7 +12261,7 @@ index e253e86..c958fd4 100644
 +		.phy_mask	= ~(1U << 17),
 +	},
 +};
-+
+ 
 +#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
 +#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
 +static struct at73c213_board_info at73c213_data = {
@@ -346,11 +12270,11 @@ index e253e86..c958fd4 100644
 +};
 +#endif
 +#endif
- 
++
 +#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
  static struct spi_board_info spi0_board_info[] __initdata = {
 +#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
-+	{
+ 	{
 +		/* AT73C213 */
 +		.modalias	= "at73c213",
 +		.max_speed_hz	= 200000,
@@ -359,15 +12283,16 @@ index e253e86..c958fd4 100644
 +		.platform_data	= &at73c213_data,
 +	},
 +#endif
- 	{
++	{
  		/* QVGA display */
  		.modalias	= "ltv350qv",
-@@ -45,6 +78,18 @@ static struct spi_board_info spi0_board_info[] __initdata = {
+ 		.max_speed_hz	= 16000000,
+@@ -45,7 +79,62 @@
  		.mode		= SPI_MODE_3,
  	},
  };
 +#endif
-+
+ 
 +#ifdef CONFIG_BOARD_ATSTK1002_SPI1
 +static struct spi_board_info spi1_board_info[] __initdata = { {
 +	/* patch in custom entries here */
@@ -378,14 +12303,57 @@ index e253e86..c958fd4 100644
 +	.detect_pin	= GPIO_PIN_NONE,
 +	.wp_pin		= GPIO_PIN_NONE,
 +};
- 
++
++#ifdef CONFIG_BOARD_ATSTK1002_GPIO_MOUSE
++static struct gpio_mouse_platform_data gpio_mouse0_data = {
++	.polarity	= GPIO_MOUSE_POLARITY_ACT_LOW,
++	{
++		{
++			.up		= GPIO_PIN_PB(2),
++			.down		= GPIO_PIN_PB(1),
++			.left		= GPIO_PIN_PB(3),
++			.right		= GPIO_PIN_PB(0),
++			.bleft		= GPIO_PIN_PB(7),
++			.bmiddle	= GPIO_PIN_PB(6),
++			.bright		= GPIO_PIN_PB(5),
++		},
++	},
++	.scan_ms	= 10,
++};
++
++static struct platform_device gpio_mouse0_device = {
++	.name		= "gpio_mouse",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &gpio_mouse0_data,
++	},
++};
++
++static void __init add_device_gpio_mouse0(void)
++{
++	struct platform_device *pdev = &gpio_mouse0_device;
++	struct gpio_mouse_platform_data *data = pdev->dev.platform_data;
++
++	at32_select_gpio(data->up, 0);
++	at32_select_gpio(data->down, 0);
++	at32_select_gpio(data->left, 0);
++	at32_select_gpio(data->right, 0);
++
++	at32_select_gpio(data->bleft, 0);
++	at32_select_gpio(data->bmiddle, 0);
++	at32_select_gpio(data->bright, 0);
++
++	platform_device_register(pdev);
++}
++#endif
++
  /*
   * The next two functions should go away as the boot loader is
-@@ -101,12 +146,103 @@ static void __init set_hw_addr(struct platform_device *pdev)
+  * supposed to initialize the macb address registers with a valid
+@@ -101,12 +190,103 @@
  	clk_put(pclk);
  }
  
--void __init setup_board(void)
 +#ifdef CONFIG_BOARD_ATSTK1002_J2_LED
 +
 +static struct gpio_led stk_j2_led[] = {
@@ -429,9 +12397,7 @@ index e253e86..c958fd4 100644
 +};
 +
 +static void setup_j2_leds(void)
- {
--#ifdef	SW2_DEFAULT
--	at32_map_usart(1, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
++{
 +	unsigned	i;
 +
 +	for (i = 0; i < ARRAY_SIZE(stk_j2_led); i++)
@@ -441,7 +12407,7 @@ index e253e86..c958fd4 100644
 +	platform_device_register(&stk_j2_led_dev);
 +}
 +
- #else
++#else
 +static void setup_j2_leds(void)
 +{
 +}
@@ -479,26 +12445,29 @@ index e253e86..c958fd4 100644
 +#endif
 +#endif
 +
-+void __init setup_board(void)
-+{
+ void __init setup_board(void)
+ {
+-#ifdef	SW2_DEFAULT
 +#ifdef	CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
- 	at32_map_usart(0, 1);	/* USART 0/B: /dev/ttyS1, IRDA */
++	at32_map_usart(0, 1);	/* USART 0/B: /dev/ttyS1, IRDA */
 +#else
-+	at32_map_usart(1, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
+ 	at32_map_usart(1, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
+-#else
+-	at32_map_usart(0, 1);	/* USART 0/B: /dev/ttyS1, IRDA */
  #endif
  	/* USART 2/unused: expansion connector */
  	at32_map_usart(3, 2);	/* USART 3/C: /dev/ttyS2, DB9 */
-@@ -140,18 +276,46 @@ static int __init atstk1002_init(void)
+@@ -140,19 +320,51 @@
  
  	at32_add_system_devices();
  
 -#ifdef	SW2_DEFAULT
--	at32_add_device_usart(0);
--#else
 +#ifdef	CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
- 	at32_add_device_usart(1);
++	at32_add_device_usart(1);
 +#else
-+	at32_add_device_usart(0);
+ 	at32_add_device_usart(0);
+-#else
+-	at32_add_device_usart(1);
  #endif
  	at32_add_device_usart(2);
  
@@ -513,7 +12482,7 @@ index e253e86..c958fd4 100644
  	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
  			     fbmem_start, fbmem_size);
 +#endif
-+
+ 
 +#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
 +	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
 +#endif
@@ -537,916 +12506,83 @@ index e253e86..c958fd4 100644
 +	at73c213_set_clk(&at73c213_data);
 +#endif
 +#endif
- 
++
++#ifdef CONFIG_BOARD_ATSTK1002_GPIO_MOUSE
++	add_device_gpio_mouse0();
++#endif
++
  	return 0;
  }
-diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
-index 49493ad..adce168 100644
---- a/arch/avr32/configs/atngw100_defconfig
-+++ b/arch/avr32/configs/atngw100_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.22-rc5
--# Sat Jun 23 15:40:05 2007
-+# Linux kernel version: 2.6.22.atmel.1
-+# Thu Jul 12 17:49:20 2007
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
-@@ -114,6 +114,7 @@ CONFIG_PLATFORM_AT32AP=y
- CONFIG_CPU_AT32AP7000=y
- # CONFIG_BOARD_ATSTK1000 is not set
- CONFIG_BOARD_ATNGW100=y
-+# CONFIG_BOARD_ATNGW100_I2C_GPIO is not set
- CONFIG_LOADER_U_BOOT=y
+ postcore_initcall(atstk1002_init);
+Index: linux-2.6.22.1/arch/avr32/Makefile
+===================================================================
+--- linux-2.6.22.1/arch/avr32/Makefile	(revision 1)
++++ linux-2.6.22.1/arch/avr32/Makefile	(arbetskopia)
+@@ -31,6 +31,7 @@
+ core-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/
+ core-y					+= arch/avr32/kernel/
+ core-y					+= arch/avr32/mm/
++drivers-y				+= arch/avr32/drivers/
+ libs-y					+= arch/avr32/lib/
  
- #
-@@ -122,6 +123,7 @@ CONFIG_LOADER_U_BOOT=y
- # CONFIG_AP7000_32_BIT_SMC is not set
- CONFIG_AP7000_16_BIT_SMC=y
- # CONFIG_AP7000_8_BIT_SMC is not set
-+CONFIG_GPIO_DEV=y
- CONFIG_LOAD_ADDRESS=0x10000000
- CONFIG_ENTRY_ADDRESS=0x90000000
- CONFIG_PHYS_OFFSET=0x10000000
-@@ -145,6 +147,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
- # CONFIG_RESOURCES_64BIT is not set
- CONFIG_ZONE_DMA_FLAG=0
- # CONFIG_OWNERSHIP_TRACE is not set
-+CONFIG_DW_DMAC=y
- # CONFIG_HZ_100 is not set
- CONFIG_HZ_250=y
- # CONFIG_HZ_300 is not set
-@@ -153,6 +156,27 @@ CONFIG_HZ=250
- CONFIG_CMDLINE=""
- 
- #
-+# Power managment options
-+#
+ archincdir-$(CONFIG_PLATFORM_AT32AP)	:= arch-at32ap
+Index: linux-2.6.22.1/arch/avr32/drivers/dw-dmac.h
+===================================================================
+--- linux-2.6.22.1/arch/avr32/drivers/dw-dmac.h	(revision 0)
++++ linux-2.6.22.1/arch/avr32/drivers/dw-dmac.h	(revision 0)
+@@ -0,0 +1,42 @@
++/*
++ * Driver for the Synopsys DesignWare DMA Controller
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __AVR32_DW_DMAC_H__
++#define __AVR32_DW_DMAC_H__
 +
-+#
-+# CPU Frequency scaling
-+#
-+CONFIG_CPU_FREQ=y
-+CONFIG_CPU_FREQ_TABLE=y
-+# CONFIG_CPU_FREQ_DEBUG is not set
-+CONFIG_CPU_FREQ_STAT=m
-+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-+CONFIG_CPU_FREQ_GOV_USERSPACE=y
-+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_AT32AP=y
++#define DW_DMAC_CFG		0x398
++#define DW_DMAC_CH_EN		0x3a0
 +
-+#
- # Bus options
- #
- # CONFIG_ARCH_SUPPORTS_MSI is not set
-@@ -187,13 +211,8 @@ CONFIG_NET_KEY=y
- # CONFIG_NET_KEY_MIGRATE is not set
- CONFIG_INET=y
- CONFIG_IP_MULTICAST=y
--CONFIG_IP_ADVANCED_ROUTER=y
--CONFIG_ASK_IP_FIB_HASH=y
--# CONFIG_IP_FIB_TRIE is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
- CONFIG_IP_FIB_HASH=y
--# CONFIG_IP_MULTIPLE_TABLES is not set
--# CONFIG_IP_ROUTE_MULTIPATH is not set
--# CONFIG_IP_ROUTE_VERBOSE is not set
- CONFIG_IP_PNP=y
- CONFIG_IP_PNP_DHCP=y
- # CONFIG_IP_PNP_BOOTP is not set
-@@ -240,6 +259,7 @@ CONFIG_IPV6_SIT=y
- # CONFIG_NETWORK_SECMARK is not set
- CONFIG_NETFILTER=y
- # CONFIG_NETFILTER_DEBUG is not set
-+CONFIG_BRIDGE_NETFILTER=y
- 
- #
- # Core Netfilter Configuration
-@@ -284,6 +304,7 @@ CONFIG_NETFILTER_XT_MATCH_MAC=m
- CONFIG_NETFILTER_XT_MATCH_MARK=m
- CONFIG_NETFILTER_XT_MATCH_POLICY=m
- CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
- CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
- CONFIG_NETFILTER_XT_MATCH_QUOTA=m
- CONFIG_NETFILTER_XT_MATCH_REALM=m
-@@ -359,13 +380,19 @@ CONFIG_IP6_NF_TARGET_REJECT=m
- CONFIG_IP6_NF_MANGLE=m
- CONFIG_IP6_NF_TARGET_HL=m
- CONFIG_IP6_NF_RAW=m
++#define DW_DMAC_STATUS_XFER	0x2e8
++#define DW_DMAC_STATUS_BLOCK	0x2f0
++#define DW_DMAC_STATUS_ERROR	0x308
 +
-+#
-+# Bridge: Netfilter Configuration
-+#
-+# CONFIG_BRIDGE_NF_EBTABLES is not set
- # CONFIG_IP_DCCP is not set
- # CONFIG_IP_SCTP is not set
- # CONFIG_TIPC is not set
- # CONFIG_ATM is not set
--# CONFIG_BRIDGE is not set
-+CONFIG_BRIDGE=m
- CONFIG_VLAN_8021Q=m
- # CONFIG_DECNET is not set
-+CONFIG_LLC=m
- # CONFIG_LLC2 is not set
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
-@@ -521,7 +548,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
- #
- # Misc devices
- #
--# CONFIG_BLINK is not set
- # CONFIG_IDE is not set
- 
- #
-@@ -545,13 +571,26 @@ CONFIG_NETDEVICES=y
- # CONFIG_BONDING is not set
- # CONFIG_EQUALIZER is not set
- CONFIG_TUN=m
--# CONFIG_PHYLIB is not set
-+CONFIG_PHYLIB=y
++#define DW_DMAC_MASK_XFER	0x310
++#define DW_DMAC_MASK_BLOCK	0x318
++#define DW_DMAC_MASK_ERROR	0x330
 +
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_FIXED_PHY is not set
- 
- #
- # Ethernet (10 or 100Mbit)
- #
- CONFIG_NET_ETHERNET=y
--CONFIG_MII=y
-+# CONFIG_MII is not set
- CONFIG_MACB=y
- # CONFIG_NETDEV_1000 is not set
- # CONFIG_NETDEV_10000 is not set
-@@ -625,7 +664,15 @@ CONFIG_UNIX98_PTYS=y
- # IPMI
- #
- # CONFIG_IPMI_HANDLER is not set
--# CONFIG_WATCHDOG is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
++#define DW_DMAC_CLEAR_XFER	0x338
++#define DW_DMAC_CLEAR_BLOCK	0x340
++#define DW_DMAC_CLEAR_ERROR	0x358
 +
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT32AP700X_WDT=y
-+CONFIG_AT32AP700X_WDT_TIMEOUT=2
- # CONFIG_HW_RANDOM is not set
- # CONFIG_RTC is not set
- # CONFIG_GEN_RTC is not set
-@@ -636,7 +683,42 @@ CONFIG_UNIX98_PTYS=y
- # TPM devices
- #
- # CONFIG_TCG_TPM is not set
--# CONFIG_I2C is not set
-+CONFIG_I2C=m
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=m
++#define DW_DMAC_STATUS_INT	0x360
 +
-+#
-+# I2C Algorithms
-+#
-+CONFIG_I2C_ALGOBIT=m
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
++#define DW_DMAC_CHAN_SAR	0x000
++#define DW_DMAC_CHAN_DAR	0x008
++#define DW_DMAC_CHAN_LLP	0x010
++#define DW_DMAC_CHAN_CTL	0x018
++#define DW_DMAC_CHAN_SSTAT	0x020
++#define DW_DMAC_CHAN_DSTAT	0x028
++#define DW_DMAC_CHAN_SSTATAR	0x030
++#define DW_DMAC_CHAN_DSTATAR	0x038
++#define DW_DMAC_CHAN_CFG	0x040
++#define DW_DMAC_CHAN_SGR	0x048
++#define DW_DMAC_CHAN_DSR	0x050
 +
-+#
-+# I2C Hardware Bus support
-+#
-+CONFIG_I2C_ATMELTWI=m
-+CONFIG_I2C_ATMELTWI_BAUDRATE=100000
-+CONFIG_I2C_GPIO=m
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_SENSORS_DS1337 is not set
-+# CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
- 
- #
- # SPI support
-@@ -655,7 +737,7 @@ CONFIG_SPI_ATMEL=y
- # SPI Protocol Masters
- #
- # CONFIG_SPI_AT25 is not set
--# CONFIG_SPI_SPIDEV is not set
-+CONFIG_SPI_SPIDEV=m
- 
- #
- # Dallas's 1-wire bus
-@@ -706,21 +788,59 @@ CONFIG_SPI_ATMEL=y
- #
- # USB Gadget Support
- #
--# CONFIG_USB_GADGET is not set
--# CONFIG_MMC is not set
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_PXA2XX is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+CONFIG_USB_GADGET_ATMEL_USBA=y
-+CONFIG_USB_ATMEL_USBA=y
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+CONFIG_USB_ZERO=m
-+CONFIG_USB_ETH=m
-+CONFIG_USB_ETH_RNDIS=y
-+CONFIG_USB_GADGETFS=m
-+CONFIG_USB_FILE_STORAGE=m
-+# CONFIG_USB_FILE_STORAGE_TEST is not set
-+CONFIG_USB_G_SERIAL=m
-+# CONFIG_USB_MIDI_GADGET is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+
-+#
-+# MMC/SD Host Controller Drivers
-+#
-+CONFIG_MMC_ATMELMCI=y
- 
- #
- # LED devices
- #
--# CONFIG_NEW_LEDS is not set
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=y
- 
- #
- # LED drivers
- #
-+CONFIG_LEDS_GPIO=y
- 
- #
- # LED Triggers
- #
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=y
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
- 
- #
- # InfiniBand support
-@@ -733,7 +853,51 @@ CONFIG_SPI_ATMEL=y
- #
- # Real Time Clock
- #
--# CONFIG_RTC_CLASS is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+CONFIG_RTC_DRV_AT32AP700X=y
- 
- #
- # DMA Engine support
-@@ -767,7 +931,8 @@ CONFIG_JBD=y
- # CONFIG_OCFS2_FS is not set
- # CONFIG_MINIX_FS is not set
- # CONFIG_ROMFS_FS is not set
--# CONFIG_INOTIFY is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
- # CONFIG_QUOTA is not set
- # CONFIG_DNOTIFY is not set
- # CONFIG_AUTOFS_FS is not set
-@@ -922,7 +1087,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
- CONFIG_ENABLE_MUST_CHECK=y
- CONFIG_MAGIC_SYSRQ=y
- # CONFIG_UNUSED_SYMBOLS is not set
--# CONFIG_DEBUG_FS is not set
-+CONFIG_DEBUG_FS=y
- # CONFIG_HEADERS_CHECK is not set
- CONFIG_DEBUG_KERNEL=y
- # CONFIG_DEBUG_SHIRQ is not set
-diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
-index 3b977fd..3708066 100644
---- a/arch/avr32/configs/atstk1002_defconfig
-+++ b/arch/avr32/configs/atstk1002_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.22-rc5
--# Sat Jun 23 15:32:08 2007
-+# Linux kernel version: 2.6.22.atmel.2
-+# Thu Jul 19 13:46:47 2007
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
-@@ -80,10 +80,10 @@ CONFIG_BASE_SMALL=1
- #
- CONFIG_MODULES=y
- CONFIG_MODULE_UNLOAD=y
--# CONFIG_MODULE_FORCE_UNLOAD is not set
-+CONFIG_MODULE_FORCE_UNLOAD=y
- # CONFIG_MODVERSIONS is not set
- # CONFIG_MODULE_SRCVERSION_ALL is not set
--# CONFIG_KMOD is not set
-+CONFIG_KMOD=y
- 
- #
- # Block layer
-@@ -99,12 +99,12 @@ CONFIG_BLOCK=y
- CONFIG_IOSCHED_NOOP=y
- # CONFIG_IOSCHED_AS is not set
- # CONFIG_IOSCHED_DEADLINE is not set
--# CONFIG_IOSCHED_CFQ is not set
-+CONFIG_IOSCHED_CFQ=y
- # CONFIG_DEFAULT_AS is not set
- # CONFIG_DEFAULT_DEADLINE is not set
--# CONFIG_DEFAULT_CFQ is not set
--CONFIG_DEFAULT_NOOP=y
--CONFIG_DEFAULT_IOSCHED="noop"
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
- 
- #
- # System Type and features
-@@ -117,6 +117,11 @@ CONFIG_CPU_AT32AP7000=y
- CONFIG_BOARD_ATSTK1002=y
- CONFIG_BOARD_ATSTK1000=y
- # CONFIG_BOARD_ATNGW100 is not set
-+# CONFIG_BOARD_ATSTK1002_CUSTOM is not set
-+# CONFIG_BOARD_ATSTK1002_SPI1 is not set
-+# CONFIG_BOARD_ATSTK1002_J2_LED is not set
-+# CONFIG_BOARD_ATSTK1002_J2_LED8 is not set
-+# CONFIG_BOARD_ATSTK1002_J2_RGB is not set
- CONFIG_LOADER_U_BOOT=y
- 
- #
-@@ -125,6 +130,7 @@ CONFIG_LOADER_U_BOOT=y
- # CONFIG_AP7000_32_BIT_SMC is not set
- CONFIG_AP7000_16_BIT_SMC=y
- # CONFIG_AP7000_8_BIT_SMC is not set
-+CONFIG_GPIO_DEV=y
- CONFIG_LOAD_ADDRESS=0x10000000
- CONFIG_ENTRY_ADDRESS=0x90000000
- CONFIG_PHYS_OFFSET=0x10000000
-@@ -148,6 +154,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
- # CONFIG_RESOURCES_64BIT is not set
- CONFIG_ZONE_DMA_FLAG=0
- # CONFIG_OWNERSHIP_TRACE is not set
-+CONFIG_DW_DMAC=y
- # CONFIG_HZ_100 is not set
- CONFIG_HZ_250=y
- # CONFIG_HZ_300 is not set
-@@ -156,6 +163,27 @@ CONFIG_HZ=250
- CONFIG_CMDLINE=""
- 
- #
-+# Power managment options
-+#
-+
-+#
-+# CPU Frequency scaling
-+#
-+CONFIG_CPU_FREQ=y
-+CONFIG_CPU_FREQ_TABLE=y
-+# CONFIG_CPU_FREQ_DEBUG is not set
-+CONFIG_CPU_FREQ_STAT=m
-+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-+CONFIG_CPU_FREQ_GOV_USERSPACE=y
-+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_AT32AP=y
-+
-+#
- # Bus options
- #
- # CONFIG_ARCH_SUPPORTS_MSI is not set
-@@ -327,6 +355,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
- #
- # Self-contained MTD device drivers
- #
-+CONFIG_MTD_DATAFLASH=m
-+# CONFIG_MTD_M25P80 is not set
- # CONFIG_MTD_SLRAM is not set
- # CONFIG_MTD_PHRAM is not set
- # CONFIG_MTD_MTDRAM is not set
-@@ -373,7 +403,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
- #
- # Misc devices
- #
--# CONFIG_BLINK is not set
-+CONFIG_ATMEL_SSC=m
- # CONFIG_IDE is not set
- 
- #
-@@ -397,13 +427,26 @@ CONFIG_DUMMY=y
- # CONFIG_BONDING is not set
- # CONFIG_EQUALIZER is not set
- CONFIG_TUN=m
--# CONFIG_PHYLIB is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+CONFIG_LXT_PHY=y
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_FIXED_PHY is not set
- 
- #
- # Ethernet (10 or 100Mbit)
- #
- CONFIG_NET_ETHERNET=y
--CONFIG_MII=y
-+# CONFIG_MII is not set
- CONFIG_MACB=y
- # CONFIG_NETDEV_1000 is not set
- # CONFIG_NETDEV_10000 is not set
-@@ -443,7 +486,42 @@ CONFIG_SLHC=m
- #
- # Input device support
- #
--# CONFIG_INPUT is not set
-+CONFIG_INPUT=m
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+CONFIG_INPUT_POLLDEV=m
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=m
-+CONFIG_INPUT_MOUSEDEV_PSAUX=y
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+# CONFIG_INPUT_TSDEV is not set
-+# CONFIG_INPUT_EVDEV is not set
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+CONFIG_KEYBOARD_GPIO=m
-+CONFIG_INPUT_MOUSE=y
-+# CONFIG_MOUSE_PS2 is not set
-+# CONFIG_MOUSE_SERIAL is not set
-+# CONFIG_MOUSE_VSXXXAA is not set
-+CONFIG_MOUSE_GPIO=m
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
- 
- #
- # Hardware I/O ports
-@@ -477,7 +555,15 @@ CONFIG_UNIX98_PTYS=y
- # IPMI
- #
- # CONFIG_IPMI_HANDLER is not set
--# CONFIG_WATCHDOG is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT32AP700X_WDT=y
-+CONFIG_AT32AP700X_WDT_TIMEOUT=2
- # CONFIG_HW_RANDOM is not set
- # CONFIG_RTC is not set
- # CONFIG_GEN_RTC is not set
-@@ -488,13 +574,61 @@ CONFIG_UNIX98_PTYS=y
- # TPM devices
- #
- # CONFIG_TCG_TPM is not set
--# CONFIG_I2C is not set
-+CONFIG_I2C=m
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=m
-+
-+#
-+# I2C Algorithms
-+#
-+CONFIG_I2C_ALGOBIT=m
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
-+
-+#
-+# I2C Hardware Bus support
-+#
-+CONFIG_I2C_ATMELTWI=m
-+CONFIG_I2C_ATMELTWI_BAUDRATE=100000
-+CONFIG_I2C_GPIO=m
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_SENSORS_DS1337 is not set
-+# CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
- 
- #
- # SPI support
- #
--# CONFIG_SPI is not set
--# CONFIG_SPI_MASTER is not set
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-+CONFIG_SPI_SPIDEV=m
- 
- #
- # Dallas's 1-wire bus
-@@ -517,19 +651,91 @@ CONFIG_UNIX98_PTYS=y
- #
- # Graphics support
- #
--# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+CONFIG_BACKLIGHT_LCD_SUPPORT=y
-+CONFIG_LCD_CLASS_DEVICE=y
-+CONFIG_LCD_LTV350QV=y
-+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
- 
- #
- # Display device support
- #
- # CONFIG_DISPLAY_SUPPORT is not set
- # CONFIG_VGASTATE is not set
--# CONFIG_FB is not set
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+CONFIG_FB_DEFERRED_IO=y
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_S1D13XXX is not set
-+CONFIG_FB_ATMEL=y
-+# CONFIG_FB_VIRTUAL is not set
-+# CONFIG_LOGO is not set
- 
- #
- # Sound
- #
--# CONFIG_SOUND is not set
-+CONFIG_SOUND=m
-+
-+#
-+# Advanced Linux Sound Architecture
-+#
-+CONFIG_SND=m
-+CONFIG_SND_TIMER=m
-+CONFIG_SND_PCM=m
-+# CONFIG_SND_SEQUENCER is not set
-+CONFIG_SND_OSSEMUL=y
-+CONFIG_SND_MIXER_OSS=m
-+CONFIG_SND_PCM_OSS=m
-+CONFIG_SND_PCM_OSS_PLUGINS=y
-+# CONFIG_SND_DYNAMIC_MINORS is not set
-+# CONFIG_SND_SUPPORT_OLD_API is not set
-+CONFIG_SND_VERBOSE_PROCFS=y
-+# CONFIG_SND_VERBOSE_PRINTK is not set
-+# CONFIG_SND_DEBUG is not set
-+
-+#
-+# Generic devices
-+#
-+# CONFIG_SND_DUMMY is not set
-+# CONFIG_SND_MTPAV is not set
-+# CONFIG_SND_SERIAL_U16550 is not set
-+# CONFIG_SND_MPU401 is not set
-+
-+#
-+# SPI devices
-+#
-+CONFIG_SND_AT73C213=m
-+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-+
-+#
-+# System on Chip audio support
-+#
-+# CONFIG_SND_SOC is not set
-+
-+#
-+# Open Sound System
-+#
-+# CONFIG_SOUND_PRIME is not set
-+
-+#
-+# HID Devices
-+#
-+# CONFIG_HID is not set
- 
- #
- # USB support
-@@ -545,21 +751,59 @@ CONFIG_UNIX98_PTYS=y
- #
- # USB Gadget Support
- #
--# CONFIG_USB_GADGET is not set
--# CONFIG_MMC is not set
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_PXA2XX is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+CONFIG_USB_GADGET_ATMEL_USBA=y
-+CONFIG_USB_ATMEL_USBA=y
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+CONFIG_USB_ZERO=m
-+CONFIG_USB_ETH=m
-+CONFIG_USB_ETH_RNDIS=y
-+CONFIG_USB_GADGETFS=m
-+CONFIG_USB_FILE_STORAGE=m
-+# CONFIG_USB_FILE_STORAGE_TEST is not set
-+CONFIG_USB_G_SERIAL=m
-+# CONFIG_USB_MIDI_GADGET is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+
-+#
-+# MMC/SD Host Controller Drivers
-+#
-+CONFIG_MMC_ATMELMCI=y
- 
- #
- # LED devices
- #
--# CONFIG_NEW_LEDS is not set
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=m
- 
- #
- # LED drivers
- #
-+CONFIG_LEDS_GPIO=m
- 
- #
- # LED Triggers
- #
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=m
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
- 
- #
- # InfiniBand support
-@@ -572,7 +816,50 @@ CONFIG_UNIX98_PTYS=y
- #
- # Real Time Clock
- #
--# CONFIG_RTC_CLASS is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+# CONFIG_RTC_HCTOSYS is not set
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+CONFIG_RTC_DRV_AT32AP700X=y
- 
- #
- # DMA Engine support
-@@ -590,11 +877,14 @@ CONFIG_UNIX98_PTYS=y
- #
- # File systems
- #
--CONFIG_EXT2_FS=m
-+CONFIG_EXT2_FS=y
- # CONFIG_EXT2_FS_XATTR is not set
- # CONFIG_EXT2_FS_XIP is not set
--# CONFIG_EXT3_FS is not set
-+CONFIG_EXT3_FS=y
-+# CONFIG_EXT3_FS_XATTR is not set
- # CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
- # CONFIG_FS_POSIX_ACL is not set
-@@ -609,7 +899,7 @@ CONFIG_INOTIFY_USER=y
- # CONFIG_DNOTIFY is not set
- # CONFIG_AUTOFS_FS is not set
- # CONFIG_AUTOFS4_FS is not set
--# CONFIG_FUSE_FS is not set
-+CONFIG_FUSE_FS=m
- 
- #
- # CD-ROM/DVD Filesystems
-@@ -638,7 +928,7 @@ CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
- CONFIG_RAMFS=y
--CONFIG_CONFIGFS_FS=m
-+CONFIG_CONFIGFS_FS=y
- 
- #
- # Miscellaneous filesystems
-@@ -683,8 +973,14 @@ CONFIG_SUNRPC=y
- # CONFIG_SUNRPC_BIND34 is not set
- # CONFIG_RPCSEC_GSS_KRB5 is not set
- # CONFIG_RPCSEC_GSS_SPKM3 is not set
--# CONFIG_SMB_FS is not set
--# CONFIG_CIFS is not set
-+CONFIG_SMB_FS=m
-+# CONFIG_SMB_NLS_DEFAULT is not set
-+CONFIG_CIFS=m
-+# CONFIG_CIFS_STATS is not set
-+# CONFIG_CIFS_WEAK_PW_HASH is not set
-+# CONFIG_CIFS_XATTR is not set
-+# CONFIG_CIFS_DEBUG2 is not set
-+# CONFIG_CIFS_EXPERIMENTAL is not set
- # CONFIG_NCP_FS is not set
- # CONFIG_CODA_FS is not set
- # CONFIG_AFS_FS is not set
-diff --git a/arch/avr32/drivers/Makefile b/arch/avr32/drivers/Makefile
-new file mode 100644
-index 0000000..b429b75
---- /dev/null
-+++ b/arch/avr32/drivers/Makefile
++#endif /* __AVR32_DW_DMAC_H__ */
+Index: linux-2.6.22.1/arch/avr32/drivers/Makefile
+===================================================================
+--- linux-2.6.22.1/arch/avr32/drivers/Makefile	(revision 0)
++++ linux-2.6.22.1/arch/avr32/drivers/Makefile	(revision 0)
 @@ -0,0 +1 @@
 +obj-$(CONFIG_DW_DMAC)			+= dw-dmac.o
-diff --git a/arch/avr32/drivers/dw-dmac.c b/arch/avr32/drivers/dw-dmac.c
-new file mode 100644
-index 0000000..224eb30
---- /dev/null
-+++ b/arch/avr32/drivers/dw-dmac.c
+Index: linux-2.6.22.1/arch/avr32/drivers/dw-dmac.c
+===================================================================
+--- linux-2.6.22.1/arch/avr32/drivers/dw-dmac.c	(revision 0)
++++ linux-2.6.22.1/arch/avr32/drivers/dw-dmac.c	(revision 0)
 @@ -0,0 +1,761 @@
 +/*
 + * Driver for the Synopsys DesignWare DMA Controller
@@ -2209,3453 +13345,1562 @@ index 0000000..224eb30
 +MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
 +MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
 +MODULE_LICENSE("GPL");
-diff --git a/arch/avr32/drivers/dw-dmac.h b/arch/avr32/drivers/dw-dmac.h
-new file mode 100644
-index 0000000..1f67921
---- /dev/null
-+++ b/arch/avr32/drivers/dw-dmac.h
-@@ -0,0 +1,42 @@
-+/*
-+ * Driver for the Synopsys DesignWare DMA Controller
+Index: linux-2.6.22.1/drivers/serial/atmel_serial.c
+===================================================================
+--- linux-2.6.22.1/drivers/serial/atmel_serial.c	(revision 1)
++++ linux-2.6.22.1/drivers/serial/atmel_serial.c	(arbetskopia)
+@@ -7,6 +7,8 @@
+  *  Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
+  *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+  *
++ *  DMA support added by Chip Coldwell.
 + *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __AVR32_DW_DMAC_H__
-+#define __AVR32_DW_DMAC_H__
-+
-+#define DW_DMAC_CFG		0x398
-+#define DW_DMAC_CH_EN		0x3a0
-+
-+#define DW_DMAC_STATUS_XFER	0x2e8
-+#define DW_DMAC_STATUS_BLOCK	0x2f0
-+#define DW_DMAC_STATUS_ERROR	0x308
-+
-+#define DW_DMAC_MASK_XFER	0x310
-+#define DW_DMAC_MASK_BLOCK	0x318
-+#define DW_DMAC_MASK_ERROR	0x330
-+
-+#define DW_DMAC_CLEAR_XFER	0x338
-+#define DW_DMAC_CLEAR_BLOCK	0x340
-+#define DW_DMAC_CLEAR_ERROR	0x358
-+
-+#define DW_DMAC_STATUS_INT	0x360
-+
-+#define DW_DMAC_CHAN_SAR	0x000
-+#define DW_DMAC_CHAN_DAR	0x008
-+#define DW_DMAC_CHAN_LLP	0x010
-+#define DW_DMAC_CHAN_CTL	0x018
-+#define DW_DMAC_CHAN_SSTAT	0x020
-+#define DW_DMAC_CHAN_DSTAT	0x028
-+#define DW_DMAC_CHAN_SSTATAR	0x030
-+#define DW_DMAC_CHAN_DSTATAR	0x038
-+#define DW_DMAC_CHAN_CFG	0x040
-+#define DW_DMAC_CHAN_SGR	0x048
-+#define DW_DMAC_CHAN_DSR	0x050
-+
-+#endif /* __AVR32_DW_DMAC_H__ */
-diff --git a/arch/avr32/kernel/Makefile b/arch/avr32/kernel/Makefile
-index 90e5aff..b6afc0c 100644
---- a/arch/avr32/kernel/Makefile
-+++ b/arch/avr32/kernel/Makefile
-@@ -9,6 +9,7 @@ obj-y				+= syscall_table.o syscall-stubs.o irq.o
- obj-y				+= setup.o traps.o semaphore.o ptrace.o
- obj-y				+= signal.o sys_avr32.o process.o time.o
- obj-y				+= init_task.o switch_to.o cpu.o
-+obj-y				+= dma-controller.o
- obj-$(CONFIG_MODULES)		+= module.o avr32_ksyms.o
- obj-$(CONFIG_KPROBES)		+= kprobes.o
- 
-diff --git a/arch/avr32/kernel/dma-controller.c b/arch/avr32/kernel/dma-controller.c
-new file mode 100644
-index 0000000..fb654b3
---- /dev/null
-+++ b/arch/avr32/kernel/dma-controller.c
-@@ -0,0 +1,34 @@
-+/*
-+ * Preliminary DMA controller framework for AVR32
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <asm/dma-controller.h>
-+
-+static LIST_HEAD(controllers);
-+
-+int register_dma_controller(struct dma_controller *dmac)
-+{
-+	static int next_id;
-+
-+	dmac->id = next_id++;
-+	list_add_tail(&dmac->list, &controllers);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(register_dma_controller);
-+
-+struct dma_controller *find_dma_controller(int id)
-+{
-+	struct dma_controller *dmac;
-+
-+	list_for_each_entry(dmac, &controllers, list)
-+		if (dmac->id == id)
-+			return dmac;
-+	return NULL;
-+}
-+EXPORT_SYMBOL(find_dma_controller);
-diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
-index b279d66..d08b0bc 100644
---- a/arch/avr32/kernel/setup.c
-+++ b/arch/avr32/kernel/setup.c
-@@ -313,7 +313,7 @@ __tagtable(ATAG_MEM, parse_tag_mem);
- 
- static int __init parse_tag_rdimg(struct tag *tag)
- {
--#ifdef CONFIG_INITRD
-+#ifdef CONFIG_BLK_DEV_INITRD
- 	struct tag_mem_range *mem = &tag->u.mem_range;
- 	int ret;
- 
-@@ -323,7 +323,7 @@ static int __init parse_tag_rdimg(struct tag *tag)
- 		return 0;
- 	}
- 
--	ret = add_reserved_region(mem->start, mem->start + mem->size - 1,
-+	ret = add_reserved_region(mem->addr, mem->addr + mem->size - 1,
- 				  "initrd");
- 	if (ret) {
- 		printk(KERN_WARNING
-diff --git a/arch/avr32/mach-at32ap/Kconfig b/arch/avr32/mach-at32ap/Kconfig
-index eb30783..43c5b9f 100644
---- a/arch/avr32/mach-at32ap/Kconfig
-+++ b/arch/avr32/mach-at32ap/Kconfig
-@@ -26,6 +26,13 @@ config AP7000_8_BIT_SMC
- 
- endchoice
- 
-+config GPIO_DEV
-+	bool "GPIO /dev interface"
-+	select CONFIGFS_FS
-+	default n
-+	help
-+	  Say `Y' to enable a /dev interface to the GPIO pins.
-+
- endmenu
- 
- endif # PLATFORM_AT32AP
-diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
-index f1d3957..250372a 100644
---- a/arch/avr32/mach-at32ap/Makefile
-+++ b/arch/avr32/mach-at32ap/Makefile
-@@ -1,3 +1,5 @@
- obj-y				+= at32ap.o clock.o intc.o extint.o pio.o hsmc.o
- obj-$(CONFIG_CPU_AT32AP7000)	+= at32ap7000.o
- obj-$(CONFIG_CPU_AT32AP7000)	+= time-tc.o
-+obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
-+obj-$(CONFIG_GPIO_DEV)		+= gpio-dev.o
-diff --git a/arch/avr32/mach-at32ap/at32ap.c b/arch/avr32/mach-at32ap/at32ap.c
-index 90f207e..7c4987f 100644
---- a/arch/avr32/mach-at32ap/at32ap.c
-+++ b/arch/avr32/mach-at32ap/at32ap.c
-@@ -11,41 +11,10 @@
- #include <linux/init.h>
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation; either version 2 of the License, or
+@@ -33,6 +35,7 @@
+ #include <linux/sysrq.h>
+ #include <linux/tty_flip.h>
  #include <linux/platform_device.h>
- 
--#include <asm/io.h>
--
- #include <asm/arch/init.h>
--#include <asm/arch/sm.h>
--
--struct at32_sm system_manager;
--
--static int __init at32_sm_init(void)
--{
--	struct resource *regs;
--	struct at32_sm *sm = &system_manager;
--	int ret = -ENXIO;
--
--	regs = platform_get_resource(&at32_sm_device, IORESOURCE_MEM, 0);
--	if (!regs)
--		goto fail;
--
--	spin_lock_init(&sm->lock);
--	sm->pdev = &at32_sm_device;
--
--	ret = -ENOMEM;
--	sm->regs = ioremap(regs->start, regs->end - regs->start + 1);
--	if (!sm->regs)
--		goto fail;
--
--	return 0;
--
--fail:
--	printk(KERN_ERR "Failed to initialize System Manager: %d\n", ret);
--	return ret;
--}
- 
- void __init setup_platform(void)
- {
--	at32_sm_init();
- 	at32_clock_init();
- 	at32_portmux_init();
- }
-diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
-index 4dda42d..1130c8a 100644
---- a/arch/avr32/mach-at32ap/at32ap7000.c
-+++ b/arch/avr32/mach-at32ap/at32ap7000.c
-@@ -17,14 +17,20 @@
- #include <asm/arch/at32ap7000.h>
- #include <asm/arch/board.h>
- #include <asm/arch/portmux.h>
--#include <asm/arch/sm.h>
- 
- #include <video/atmel_lcdc.h>
- 
- #include "clock.h"
- #include "hmatrix.h"
- #include "pio.h"
--#include "sm.h"
-+#include "pm.h"
-+
-+/*
-+ * We can reduce the code size a bit by using a constant here. Since
-+ * this file is completely chip-specific, it's safe to not use
-+ * ioremap. Generic drivers should of course never do this.
-+ */
-+#define AT32_PM_BASE	0xfff00000
- 
- #define PBMEM(base)					\
- 	{						\
-@@ -88,6 +94,8 @@ static struct clk devname##_##_name = {				\
- 	.index		= _index,				\
- }
- 
-+static DEFINE_SPINLOCK(pm_lock);
-+
- unsigned long at32ap7000_osc_rates[3] = {
- 	[0] = 32768,
- 	/* FIXME: these are ATSTK1002-specific */
-@@ -104,11 +112,11 @@ static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
- {
- 	unsigned long div, mul, rate;
- 
--	if (!(control & SM_BIT(PLLEN)))
-+	if (!(control & PM_BIT(PLLEN)))
- 		return 0;
- 
--	div = SM_BFEXT(PLLDIV, control) + 1;
--	mul = SM_BFEXT(PLLMUL, control) + 1;
-+	div = PM_BFEXT(PLLDIV, control) + 1;
-+	mul = PM_BFEXT(PLLMUL, control) + 1;
- 
- 	rate = clk->parent->get_rate(clk->parent);
- 	rate = (rate + div / 2) / div;
-@@ -121,7 +129,7 @@ static unsigned long pll0_get_rate(struct clk *clk)
- {
- 	u32 control;
- 
--	control = sm_readl(&system_manager, PM_PLL0);
-+	control = pm_readl(PLL0);
- 
- 	return pll_get_rate(clk, control);
- }
-@@ -130,7 +138,7 @@ static unsigned long pll1_get_rate(struct clk *clk)
- {
- 	u32 control;
- 
--	control = sm_readl(&system_manager, PM_PLL1);
-+	control = pm_readl(PLL1);
- 
- 	return pll_get_rate(clk, control);
- }
-@@ -187,108 +195,139 @@ static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
- 
- static void cpu_clk_mode(struct clk *clk, int enabled)
- {
--	struct at32_sm *sm = &system_manager;
- 	unsigned long flags;
- 	u32 mask;
- 
--	spin_lock_irqsave(&sm->lock, flags);
--	mask = sm_readl(sm, PM_CPU_MASK);
-+	spin_lock_irqsave(&pm_lock, flags);
-+	mask = pm_readl(CPU_MASK);
- 	if (enabled)
- 		mask |= 1 << clk->index;
- 	else
- 		mask &= ~(1 << clk->index);
--	sm_writel(sm, PM_CPU_MASK, mask);
--	spin_unlock_irqrestore(&sm->lock, flags);
-+	pm_writel(CPU_MASK, mask);
-+	spin_unlock_irqrestore(&pm_lock, flags);
- }
- 
- static unsigned long cpu_clk_get_rate(struct clk *clk)
- {
- 	unsigned long cksel, shift = 0;
- 
--	cksel = sm_readl(&system_manager, PM_CKSEL);
--	if (cksel & SM_BIT(CPUDIV))
--		shift = SM_BFEXT(CPUSEL, cksel) + 1;
-+	cksel = pm_readl(CKSEL);
-+	if (cksel & PM_BIT(CPUDIV))
-+		shift = PM_BFEXT(CPUSEL, cksel) + 1;
- 
- 	return bus_clk_get_rate(clk, shift);
- }
- 
-+static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
-+{
-+	u32 control;
-+	unsigned long parent_rate, child_div, actual_rate, div;
-+
-+	parent_rate = clk->parent->get_rate(clk->parent);
-+	control = pm_readl(CKSEL);
-+
-+	if (control & PM_BIT(HSBDIV))
-+		child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
-+	else
-+		child_div = 1;
-+
-+	if (rate > 3 * (parent_rate / 4) || child_div == 1) {
-+		actual_rate = parent_rate;
-+		control &= ~PM_BIT(CPUDIV);
-+	} else {
-+		unsigned int cpusel;
-+		div = (parent_rate + rate / 2) / rate;
-+		if (div > child_div)
-+			div = child_div;
-+		cpusel = (div > 1) ? (fls(div) - 2) : 0;
-+		control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
-+		actual_rate = parent_rate / (1 << (cpusel + 1));
-+	}
-+
-+	pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
-+			clk->name, rate, actual_rate);
-+
-+	if (apply)
-+		pm_writel(CKSEL, control);
-+
-+	return actual_rate;
-+}
-+
- static void hsb_clk_mode(struct clk *clk, int enabled)
- {
--	struct at32_sm *sm = &system_manager;
- 	unsigned long flags;
- 	u32 mask;
- 
--	spin_lock_irqsave(&sm->lock, flags);
--	mask = sm_readl(sm, PM_HSB_MASK);
-+	spin_lock_irqsave(&pm_lock, flags);
-+	mask = pm_readl(HSB_MASK);
- 	if (enabled)
- 		mask |= 1 << clk->index;
- 	else
- 		mask &= ~(1 << clk->index);
--	sm_writel(sm, PM_HSB_MASK, mask);
--	spin_unlock_irqrestore(&sm->lock, flags);
-+	pm_writel(HSB_MASK, mask);
-+	spin_unlock_irqrestore(&pm_lock, flags);
- }
- 
- static unsigned long hsb_clk_get_rate(struct clk *clk)
- {
- 	unsigned long cksel, shift = 0;
- 
--	cksel = sm_readl(&system_manager, PM_CKSEL);
--	if (cksel & SM_BIT(HSBDIV))
--		shift = SM_BFEXT(HSBSEL, cksel) + 1;
-+	cksel = pm_readl(CKSEL);
-+	if (cksel & PM_BIT(HSBDIV))
-+		shift = PM_BFEXT(HSBSEL, cksel) + 1;
- 
- 	return bus_clk_get_rate(clk, shift);
- }
- 
- static void pba_clk_mode(struct clk *clk, int enabled)
- {
--	struct at32_sm *sm = &system_manager;
- 	unsigned long flags;
- 	u32 mask;
- 
--	spin_lock_irqsave(&sm->lock, flags);
--	mask = sm_readl(sm, PM_PBA_MASK);
-+	spin_lock_irqsave(&pm_lock, flags);
-+	mask = pm_readl(PBA_MASK);
- 	if (enabled)
- 		mask |= 1 << clk->index;
- 	else
- 		mask &= ~(1 << clk->index);
--	sm_writel(sm, PM_PBA_MASK, mask);
--	spin_unlock_irqrestore(&sm->lock, flags);
-+	pm_writel(PBA_MASK, mask);
-+	spin_unlock_irqrestore(&pm_lock, flags);
- }
- 
- static unsigned long pba_clk_get_rate(struct clk *clk)
- {
- 	unsigned long cksel, shift = 0;
- 
--	cksel = sm_readl(&system_manager, PM_CKSEL);
--	if (cksel & SM_BIT(PBADIV))
--		shift = SM_BFEXT(PBASEL, cksel) + 1;
-+	cksel = pm_readl(CKSEL);
-+	if (cksel & PM_BIT(PBADIV))
-+		shift = PM_BFEXT(PBASEL, cksel) + 1;
- 
- 	return bus_clk_get_rate(clk, shift);
- }
- 
- static void pbb_clk_mode(struct clk *clk, int enabled)
- {
--	struct at32_sm *sm = &system_manager;
- 	unsigned long flags;
- 	u32 mask;
- 
--	spin_lock_irqsave(&sm->lock, flags);
--	mask = sm_readl(sm, PM_PBB_MASK);
-+	spin_lock_irqsave(&pm_lock, flags);
-+	mask = pm_readl(PBB_MASK);
- 	if (enabled)
- 		mask |= 1 << clk->index;
- 	else
- 		mask &= ~(1 << clk->index);
--	sm_writel(sm, PM_PBB_MASK, mask);
--	spin_unlock_irqrestore(&sm->lock, flags);
-+	pm_writel(PBB_MASK, mask);
-+	spin_unlock_irqrestore(&pm_lock, flags);
- }
- 
- static unsigned long pbb_clk_get_rate(struct clk *clk)
- {
- 	unsigned long cksel, shift = 0;
- 
--	cksel = sm_readl(&system_manager, PM_CKSEL);
--	if (cksel & SM_BIT(PBBDIV))
--		shift = SM_BFEXT(PBBSEL, cksel) + 1;
-+	cksel = pm_readl(CKSEL);
-+	if (cksel & PM_BIT(PBBDIV))
-+		shift = PM_BFEXT(PBBSEL, cksel) + 1;
- 
- 	return bus_clk_get_rate(clk, shift);
- }
-@@ -296,6 +335,7 @@ static unsigned long pbb_clk_get_rate(struct clk *clk)
- static struct clk cpu_clk = {
- 	.name		= "cpu",
- 	.get_rate	= cpu_clk_get_rate,
-+	.set_rate	= cpu_clk_set_rate,
- 	.users		= 1,
- };
- static struct clk hsb_clk = {
-@@ -327,12 +367,12 @@ static void genclk_mode(struct clk *clk, int enabled)
- {
- 	u32 control;
- 
--	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
-+	control = pm_readl(GCCTRL(clk->index));
- 	if (enabled)
--		control |= SM_BIT(CEN);
-+		control |= PM_BIT(CEN);
- 	else
--		control &= ~SM_BIT(CEN);
--	sm_writel(&system_manager, PM_GCCTRL + 4 * clk->index, control);
-+		control &= ~PM_BIT(CEN);
-+	pm_writel(GCCTRL(clk->index), control);
- }
- 
- static unsigned long genclk_get_rate(struct clk *clk)
-@@ -340,9 +380,9 @@ static unsigned long genclk_get_rate(struct clk *clk)
- 	u32 control;
- 	unsigned long div = 1;
- 
--	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
--	if (control & SM_BIT(DIVEN))
--		div = 2 * (SM_BFEXT(DIV, control) + 1);
-+	control = pm_readl(GCCTRL(clk->index));
-+	if (control & PM_BIT(DIVEN))
-+		div = 2 * (PM_BFEXT(DIV, control) + 1);
- 
- 	return clk->parent->get_rate(clk->parent) / div;
- }
-@@ -353,23 +393,22 @@ static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
- 	unsigned long parent_rate, actual_rate, div;
- 
- 	parent_rate = clk->parent->get_rate(clk->parent);
--	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
-+	control = pm_readl(GCCTRL(clk->index));
- 
- 	if (rate > 3 * parent_rate / 4) {
- 		actual_rate = parent_rate;
--		control &= ~SM_BIT(DIVEN);
-+		control &= ~PM_BIT(DIVEN);
- 	} else {
- 		div = (parent_rate + rate) / (2 * rate) - 1;
--		control = SM_BFINS(DIV, div, control) | SM_BIT(DIVEN);
-+		control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
- 		actual_rate = parent_rate / (2 * (div + 1));
- 	}
- 
--	printk("clk %s: new rate %lu (actual rate %lu)\n",
--	       clk->name, rate, actual_rate);
-+	dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
-+		clk->name, rate, actual_rate);
- 
- 	if (apply)
--		sm_writel(&system_manager, PM_GCCTRL + 4 * clk->index,
--			  control);
-+		pm_writel(GCCTRL(clk->index), control);
- 
- 	return actual_rate;
- }
-@@ -378,24 +417,24 @@ int genclk_set_parent(struct clk *clk, struct clk *parent)
- {
- 	u32 control;
- 
--	printk("clk %s: new parent %s (was %s)\n",
--	       clk->name, parent->name, clk->parent->name);
-+	dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
-+		clk->name, parent->name, clk->parent->name);
- 
--	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
-+	control = pm_readl(GCCTRL(clk->index));
- 
- 	if (parent == &osc1 || parent == &pll1)
--		control |= SM_BIT(OSCSEL);
-+		control |= PM_BIT(OSCSEL);
- 	else if (parent == &osc0 || parent == &pll0)
--		control &= ~SM_BIT(OSCSEL);
-+		control &= ~PM_BIT(OSCSEL);
- 	else
- 		return -EINVAL;
- 
- 	if (parent == &pll0 || parent == &pll1)
--		control |= SM_BIT(PLLSEL);
-+		control |= PM_BIT(PLLSEL);
- 	else
--		control &= ~SM_BIT(PLLSEL);
-+		control &= ~PM_BIT(PLLSEL);
- 
--	sm_writel(&system_manager, PM_GCCTRL + 4 * clk->index, control);
-+	pm_writel(GCCTRL(clk->index), control);
- 	clk->parent = parent;
- 
- 	return 0;
-@@ -408,11 +447,11 @@ static void __init genclk_init_parent(struct clk *clk)
- 
- 	BUG_ON(clk->index > 7);
- 
--	control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
--	if (control & SM_BIT(OSCSEL))
--		parent = (control & SM_BIT(PLLSEL)) ? &pll1 : &osc1;
-+	control = pm_readl(GCCTRL(clk->index));
-+	if (control & PM_BIT(OSCSEL))
-+		parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
- 	else
--		parent = (control & SM_BIT(PLLSEL)) ? &pll0 : &osc0;
-+		parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
- 
- 	clk->parent = parent;
- }
-@@ -420,21 +459,53 @@ static void __init genclk_init_parent(struct clk *clk)
- /* --------------------------------------------------------------------
-  *  System peripherals
-  * -------------------------------------------------------------------- */
--static struct resource sm_resource[] = {
--	PBMEM(0xfff00000),
--	NAMED_IRQ(19, "eim"),
--	NAMED_IRQ(20, "pm"),
--	NAMED_IRQ(21, "rtc"),
--};
--struct platform_device at32_sm_device = {
--	.name		= "sm",
--	.id		= 0,
--	.resource	= sm_resource,
--	.num_resources	= ARRAY_SIZE(sm_resource),
-+static struct resource at32_pm0_resource[] = {
-+	{
-+		.start	= 0xfff00000,
-+		.end	= 0xfff0007f,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	IRQ(20),
- };
--static struct clk at32_sm_pclk = {
-+
-+static struct resource at32ap700x_rtc0_resource[] = {
-+	{
-+		.start	= 0xfff00080,
-+		.end	= 0xfff000af,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	IRQ(21),
-+};
-+
-+static struct resource at32_wdt0_resource[] = {
-+	{
-+		.start	= 0xfff000b0,
-+		.end	= 0xfff000bf,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+};
-+
-+static struct resource at32_eic0_resource[] = {
-+	{
-+		.start	= 0xfff00100,
-+		.end	= 0xfff0013f,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	IRQ(19),
-+};
-+
-+DEFINE_DEV(at32_pm, 0);
-+DEFINE_DEV(at32ap700x_rtc, 0);
-+DEFINE_DEV(at32_wdt, 0);
-+DEFINE_DEV(at32_eic, 0);
-+
-+/*
-+ * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
-+ * is always running.
-+ */
-+static struct clk at32_pm_pclk = {
- 	.name		= "pclk",
--	.dev		= &at32_sm_device.dev,
-+	.dev		= &at32_pm0_device.dev,
- 	.parent		= &pbb_clk,
- 	.mode		= pbb_clk_mode,
- 	.get_rate	= pbb_clk_get_rate,
-@@ -491,6 +562,17 @@ static struct clk pico_clk = {
- 	.users		= 1,
- };
- 
-+static struct resource dmaca0_resource[] = {
-+	{
-+		.start	= 0xff200000,
-+		.end	= 0xff20ffff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	IRQ(2),
-+};
-+DEFINE_DEV(dmaca, 0);
-+DEV_CLK(hclk, dmaca0, hsb, 10);
-+
- /* --------------------------------------------------------------------
-  * HMATRIX
-  * -------------------------------------------------------------------- */
-@@ -583,12 +665,14 @@ DEV_CLK(mck, pio4, pba, 14);
- 
- void __init at32_add_system_devices(void)
- {
--	system_manager.eim_first_irq = EIM_IRQ_BASE;
--
--	platform_device_register(&at32_sm_device);
-+	platform_device_register(&at32_pm0_device);
- 	platform_device_register(&at32_intc0_device);
-+	platform_device_register(&at32ap700x_rtc0_device);
-+	platform_device_register(&at32_wdt0_device);
-+	platform_device_register(&at32_eic0_device);
- 	platform_device_register(&smc0_device);
- 	platform_device_register(&pdc_device);
-+	platform_device_register(&dmaca0_device);
- 
- 	platform_device_register(&at32_systc0_device);
- 
-@@ -894,6 +978,83 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
- }
- 
- /* --------------------------------------------------------------------
-+ *  TWI
-+ * -------------------------------------------------------------------- */
-+
-+static struct resource atmel_twi0_resource[] = {
-+	PBMEM(0xffe00800),
-+	IRQ(5),
-+};
-+DEFINE_DEV(atmel_twi, 0);
-+DEV_CLK(pclk,atmel_twi0,pba,2);
-+
-+struct platform_device *__init
-+at32_add_device_twi(unsigned int id)
-+{
-+	struct platform_device *pdev;
-+
-+	switch (id) {
-+	case 0:
-+		pdev = &atmel_twi0_device;
-+		select_peripheral(PA(6),  PERIPH_A, 0);	/* SDA	*/
-+		select_peripheral(PA(7),  PERIPH_A, 0);	/* SCL	*/
-+		break;
-+
-+	default:
-+		return NULL;
-+	}
-+
-+	platform_device_register(pdev);
-+	return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * MMC
-+ * -------------------------------------------------------------------- */
-+static struct mci_platform_data atmel_mci0_data = {
-+	.detect_pin	= GPIO_PIN_NONE,
-+	.wp_pin		= GPIO_PIN_NONE,
-+};
-+static struct resource atmel_mci0_resource[] = {
-+	PBMEM(0xfff02400),
-+	IRQ(28),
-+};
-+DEFINE_DEV_DATA(atmel_mci, 0);
-+DEV_CLK(mci_clk, atmel_mci0, pbb, 9);
-+
-+struct platform_device *__init
-+at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
-+{
-+	struct platform_device *pdev;
-+
-+	switch (id) {
-+	case 0:
-+		pdev = &atmel_mci0_device;
-+		select_peripheral(PA(10), PERIPH_A, 0);	/* CLK	 */
-+		select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
-+		select_peripheral(PA(12), PERIPH_A, 0);	/* DATA0 */
-+		select_peripheral(PA(13), PERIPH_A, 0);	/* DATA1 */
-+		select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
-+		select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
-+		break;
-+	default:
-+		return NULL;
-+	}
-+
-+	if (data) {
-+		if (data->detect_pin != GPIO_PIN_NONE)
-+			at32_select_gpio(data->detect_pin, 0);
-+		if (data->wp_pin != GPIO_PIN_NONE)
-+			at32_select_gpio(data->wp_pin, 0);
-+		memcpy(pdev->dev.platform_data, data,
-+		       sizeof(struct mci_platform_data));
-+	}
-+
-+	platform_device_register(pdev);
-+	return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-  *  LCDC
-  * -------------------------------------------------------------------- */
- static struct atmel_lcdfb_info atmel_lcdfb0_data;
-@@ -1013,6 +1174,228 @@ err_dup_modedb:
- }
- 
- /* --------------------------------------------------------------------
-+ *  USB Device Controller
-+ * -------------------------------------------------------------------- */
-+static struct resource usba0_resource[] __initdata = {
-+	{
-+		.name		= "fifo",
-+		.start		= 0xff300000,
-+		.end		= 0xff3fffff,
-+		.flags		= IORESOURCE_MEM,
-+	}, {
-+		.name		= "regs",
-+		.start		= 0xfff03000,
-+		.end		= 0xfff033ff,
-+		.flags		= IORESOURCE_MEM,
-+	},
-+	IRQ(31),
-+};
-+static struct clk usba0_pclk = {
-+	.name		= "pclk",
-+	.parent		= &pbb_clk,
-+	.mode		= pbb_clk_mode,
-+	.get_rate	= pbb_clk_get_rate,
-+	.index		= 12,
-+};
-+static struct clk usba0_hclk = {
-+	.name		= "hclk",
-+	.parent		= &hsb_clk,
-+	.mode		= hsb_clk_mode,
-+	.get_rate	= hsb_clk_get_rate,
-+	.index		= 6,
-+};
-+
-+struct platform_device *__init
-+at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
-+{
-+	struct platform_device *pdev;
-+
-+	if (id != 0)
-+		return NULL;
-+
-+	pdev = platform_device_alloc("atmel_usba_udc", 0);
-+	if (!pdev)
-+		return NULL;
-+
-+	if (platform_device_add_resources(pdev, usba0_resource,
-+					  ARRAY_SIZE(usba0_resource)))
-+		goto out_free_pdev;
-+
-+	if (data) {
-+		if (platform_device_add_data(pdev, data, sizeof(*data)))
-+			goto out_free_pdev;
-+
-+		if (data->vbus_pin != GPIO_PIN_NONE)
-+			at32_select_gpio(data->vbus_pin, 0);
-+	}
-+
-+	usba0_pclk.dev = &pdev->dev;
-+	usba0_hclk.dev = &pdev->dev;
-+
-+	platform_device_add(pdev);
-+
-+	return pdev;
-+
-+out_free_pdev:
-+	platform_device_put(pdev);
-+	return NULL;
-+}
-+
-+/* --------------------------------------------------------------------
-+ *  SSC
-+ * -------------------------------------------------------------------- */
-+static struct resource ssc0_resource[] = {
-+	PBMEM(0xffe01c00),
-+	IRQ(10),
-+};
-+DEFINE_DEV(ssc, 0);
-+DEV_CLK(pclk, ssc0, pba, 7);
-+
-+static struct resource ssc1_resource[] = {
-+	PBMEM(0xffe02000),
-+	IRQ(11),
-+};
-+DEFINE_DEV(ssc, 1);
-+DEV_CLK(pclk, ssc1, pba, 8);
-+
-+static struct resource ssc2_resource[] = {
-+	PBMEM(0xffe02400),
-+	IRQ(12),
-+};
-+DEFINE_DEV(ssc, 2);
-+DEV_CLK(pclk, ssc2, pba, 9);
-+
-+struct platform_device *__init
-+at32_add_device_ssc(unsigned int id, unsigned int flags)
-+{
-+	struct platform_device *pdev;
-+
-+	switch (id) {
-+	case 0:
-+		pdev = &ssc0_device;
-+		if (flags & ATMEL_SSC_RF)
-+			select_peripheral(PA(21), PERIPH_A, 0);	/* RF */
-+		if (flags & ATMEL_SSC_RK)
-+			select_peripheral(PA(22), PERIPH_A, 0);	/* RK */
-+		if (flags & ATMEL_SSC_TK)
-+			select_peripheral(PA(23), PERIPH_A, 0);	/* TK */
-+		if (flags & ATMEL_SSC_TF)
-+			select_peripheral(PA(24), PERIPH_A, 0);	/* TF */
-+		if (flags & ATMEL_SSC_TD)
-+			select_peripheral(PA(25), PERIPH_A, 0);	/* TD */
-+		if (flags & ATMEL_SSC_RD)
-+			select_peripheral(PA(26), PERIPH_A, 0);	/* RD */
-+		break;
-+	case 1:
-+		pdev = &ssc1_device;
-+		if (flags & ATMEL_SSC_RF)
-+			select_peripheral(PA(0), PERIPH_B, 0);	/* RF */
-+		if (flags & ATMEL_SSC_RK)
-+			select_peripheral(PA(1), PERIPH_B, 0);	/* RK */
-+		if (flags & ATMEL_SSC_TK)
-+			select_peripheral(PA(2), PERIPH_B, 0);	/* TK */
-+		if (flags & ATMEL_SSC_TF)
-+			select_peripheral(PA(3), PERIPH_B, 0);	/* TF */
-+		if (flags & ATMEL_SSC_TD)
-+			select_peripheral(PA(4), PERIPH_B, 0);	/* TD */
-+		if (flags & ATMEL_SSC_RD)
-+			select_peripheral(PA(5), PERIPH_B, 0);	/* RD */
-+		break;
-+	case 2:
-+		pdev = &ssc2_device;
-+		if (flags & ATMEL_SSC_TD)
-+			select_peripheral(PB(13), PERIPH_A, 0);	/* TD */
-+		if (flags & ATMEL_SSC_RD)
-+			select_peripheral(PB(14), PERIPH_A, 0);	/* RD */
-+		if (flags & ATMEL_SSC_TK)
-+			select_peripheral(PB(15), PERIPH_A, 0);	/* TK */
-+		if (flags & ATMEL_SSC_TF)
-+			select_peripheral(PB(16), PERIPH_A, 0);	/* TF */
-+		if (flags & ATMEL_SSC_RF)
-+			select_peripheral(PB(17), PERIPH_A, 0);	/* RF */
-+		if (flags & ATMEL_SSC_RK)
-+			select_peripheral(PB(18), PERIPH_A, 0);	/* RK */
-+		break;
-+	default:
-+		return NULL;
-+	}
-+
-+	platform_device_register(pdev);
-+	return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-+ *  AC97C
-+ * -------------------------------------------------------------------- */
-+static struct resource atmel_ac97c0_resource[] = {
-+	PBMEM(0xfff02800),
-+	IRQ(29),
-+};
-+DEFINE_DEV(atmel_ac97c, 0);
-+DEV_CLK(pclk, atmel_ac97c0, pbb, 10);
-+
-+struct platform_device *__init
-+at32_add_device_ac97c(unsigned int id)
-+{
-+	struct platform_device *pdev;
-+
-+	switch (id) {
-+	case 0:
-+		pdev = &atmel_ac97c0_device;
-+		select_peripheral(PB(20), PERIPH_B, 0);	/* SYNC	*/
-+		select_peripheral(PB(21), PERIPH_B, 0);	/* SDO	*/
-+		select_peripheral(PB(22), PERIPH_B, 0);	/* SDI	*/
-+		select_peripheral(PB(23), PERIPH_B, 0);	/* SCLK	*/
-+		break;
-+	default:
-+		return NULL;
-+	}
-+
-+	platform_device_register(pdev);
-+	return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-+ *  DAC
-+ * -------------------------------------------------------------------- */
-+static struct resource abdac0_resource[] = {
-+	PBMEM(0xfff02000),
-+	IRQ(27),
-+};
-+DEFINE_DEV(abdac, 0);
-+DEV_CLK(pclk, abdac0, pbb, 8);
-+static struct clk abdac0_sample_clk = {
-+	.name           = "sample_clk",
-+	.dev            = &abdac0_device.dev,
-+	.mode           = genclk_mode,
-+	.get_rate       = genclk_get_rate,
-+	.set_rate       = genclk_set_rate,
-+	.set_parent     = genclk_set_parent,
-+	.index          = 6,
-+};
-+
-+struct platform_device *__init
-+at32_add_device_abdac(unsigned int id)
-+{
-+	struct platform_device *pdev;
-+
-+	switch (id) {
-+	case 0:
-+		pdev = &abdac0_device;
-+		select_peripheral(PB(20), PERIPH_A, 0);	/* DATA1	*/
-+		select_peripheral(PB(21), PERIPH_A, 0);	/* DATA0	*/
-+		select_peripheral(PB(22), PERIPH_A, 0);	/* DATAN1	*/
-+		select_peripheral(PB(23), PERIPH_A, 0);	/* DATAN0	*/
-+		break;
-+	default:
-+		return NULL;
-+	}
-+
-+	platform_device_register(pdev);
-+	return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-  *  GCLK
-  * -------------------------------------------------------------------- */
- static struct clk gclk0 = {
-@@ -1066,7 +1449,7 @@ struct clk *at32_clock_list[] = {
- 	&hsb_clk,
- 	&pba_clk,
- 	&pbb_clk,
--	&at32_sm_pclk,
-+	&at32_pm_pclk,
- 	&at32_intc0_pclk,
- 	&hmatrix_clk,
- 	&ebi_clk,
-@@ -1075,6 +1458,7 @@ struct clk *at32_clock_list[] = {
- 	&smc0_mck,
- 	&pdc_hclk,
- 	&pdc_pclk,
-+	&dmaca0_hclk,
- 	&pico_clk,
- 	&pio0_mck,
- 	&pio1_mck,
-@@ -1092,8 +1476,18 @@ struct clk *at32_clock_list[] = {
- 	&macb1_pclk,
- 	&atmel_spi0_spi_clk,
- 	&atmel_spi1_spi_clk,
-+	&atmel_twi0_pclk,
-+	&atmel_mci0_mci_clk,
- 	&atmel_lcdfb0_hck1,
- 	&atmel_lcdfb0_pixclk,
-+	&usba0_pclk,
-+	&usba0_hclk,
-+	&ssc0_pclk,
-+	&ssc1_pclk,
-+	&ssc2_pclk,
-+	&atmel_ac97c0_pclk,
-+	&abdac0_pclk,
-+	&abdac0_sample_clk,
- 	&gclk0,
- 	&gclk1,
- 	&gclk2,
-@@ -1113,18 +1507,20 @@ void __init at32_portmux_init(void)
- 
- void __init at32_clock_init(void)
- {
--	struct at32_sm *sm = &system_manager;
- 	u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
- 	int i;
- 
--	if (sm_readl(sm, PM_MCCTRL) & SM_BIT(PLLSEL))
-+	if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
- 		main_clock = &pll0;
--	else
-+		cpu_clk.parent = &pll0;
-+	} else {
- 		main_clock = &osc0;
-+		cpu_clk.parent = &osc0;
-+	}
- 
--	if (sm_readl(sm, PM_PLL0) & SM_BIT(PLLOSC))
-+	if (pm_readl(PLL0) & PM_BIT(PLLOSC))
- 		pll0.parent = &osc1;
--	if (sm_readl(sm, PM_PLL1) & SM_BIT(PLLOSC))
-+	if (pm_readl(PLL1) & PM_BIT(PLLOSC))
- 		pll1.parent = &osc1;
- 
- 	genclk_init_parent(&gclk0);
-@@ -1133,6 +1529,7 @@ void __init at32_clock_init(void)
- 	genclk_init_parent(&gclk3);
- 	genclk_init_parent(&gclk4);
- 	genclk_init_parent(&atmel_lcdfb0_pixclk);
-+	genclk_init_parent(&abdac0_sample_clk);
- 
- 	/*
- 	 * Turn on all clocks that have at least one user already, and
-@@ -1157,8 +1554,8 @@ void __init at32_clock_init(void)
- 			pbb_mask |= 1 << clk->index;
- 	}
- 
--	sm_writel(sm, PM_CPU_MASK, cpu_mask);
--	sm_writel(sm, PM_HSB_MASK, hsb_mask);
--	sm_writel(sm, PM_PBA_MASK, pba_mask);
--	sm_writel(sm, PM_PBB_MASK, pbb_mask);
-+	pm_writel(CPU_MASK, cpu_mask);
-+	pm_writel(HSB_MASK, hsb_mask);
-+	pm_writel(PBA_MASK, pba_mask);
-+	pm_writel(PBB_MASK, pbb_mask);
- }
-diff --git a/arch/avr32/mach-at32ap/cpufreq.c b/arch/avr32/mach-at32ap/cpufreq.c
-new file mode 100644
-index 0000000..235524b
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/cpufreq.c
-@@ -0,0 +1,112 @@
-+/*
-+ * Copyright (C) 2004-2007 Atmel Corporation
-+ *
-+ * Based on MIPS implementation arch/mips/kernel/time.c
-+ *   Copyright 2001 MontaVista Software Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+/*#define DEBUG*/
-+
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/cpufreq.h>
-+#include <linux/io.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <asm/system.h>
-+
-+static struct clk *cpuclk;
-+
-+static int at32_verify_speed(struct cpufreq_policy *policy)
-+{
-+	if (policy->cpu != 0)
-+		return -EINVAL;
-+
-+	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
-+			policy->cpuinfo.max_freq);
-+	return 0;
-+}
-+
-+static unsigned int at32_get_speed(unsigned int cpu)
-+{
-+	/* No SMP support */
-+	if (cpu)
-+		return 0;
-+	return (unsigned int)((clk_get_rate(cpuclk) + 500) / 1000);
-+}
-+
-+static int at32_set_target(struct cpufreq_policy *policy,
-+			  unsigned int target_freq,
-+			  unsigned int relation)
-+{
-+	struct cpufreq_freqs freqs;
-+	long freq;
-+
-+	/* Convert target_freq from kHz to Hz */
-+	freq = clk_round_rate(cpuclk, target_freq * 1000);
-+
-+	/* Check if policy->min <= new_freq <= policy->max */
-+	if(freq < (policy->min * 1000) || freq > (policy->max * 1000))
-+		return -EINVAL;
-+
-+	pr_debug("cpufreq: requested frequency %u Hz\n", target_freq * 1000);
-+
-+	freqs.old = at32_get_speed(0);
-+	freqs.new = (freq + 500) / 1000;
-+	freqs.cpu = 0;
-+	freqs.flags = 0;
-+
-+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-+	clk_set_rate(cpuclk, freq);
-+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-+
-+	pr_debug("cpufreq: set frequency %lu Hz\n", freq);
-+
-+	return 0;
-+}
-+
-+static int __init at32_cpufreq_driver_init(struct cpufreq_policy *policy)
-+{
-+	if (policy->cpu != 0)
-+		return -EINVAL;
-+
-+	cpuclk = clk_get(NULL, "cpu");
-+	if (IS_ERR(cpuclk)) {
-+		pr_debug("cpufreq: could not get CPU clk\n");
-+		return PTR_ERR(cpuclk);
-+	}
-+
-+	policy->cpuinfo.min_freq = (clk_round_rate(cpuclk, 1) + 500) / 1000;
-+	policy->cpuinfo.max_freq = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
-+	policy->cpuinfo.transition_latency = 0;
-+	policy->cur = at32_get_speed(0);
-+	policy->min = policy->cpuinfo.min_freq;
-+	policy->max = policy->cpuinfo.max_freq;
-+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-+
-+	printk("cpufreq: AT32AP CPU frequency driver\n");
-+
-+	return 0;
-+}
-+
-+static struct cpufreq_driver at32_driver = {
-+	.name		= "at32ap",
-+	.owner		= THIS_MODULE,
-+	.init		= at32_cpufreq_driver_init,
-+	.verify		= at32_verify_speed,
-+	.target		= at32_set_target,
-+	.get		= at32_get_speed,
-+	.flags		= CPUFREQ_STICKY,
-+};
-+
-+static int __init at32_cpufreq_init(void)
-+{
-+	return cpufreq_register_driver(&at32_driver);
-+}
-+
-+arch_initcall(at32_cpufreq_init);
-diff --git a/arch/avr32/mach-at32ap/extint.c b/arch/avr32/mach-at32ap/extint.c
-index 4a60ecc..8acd010 100644
---- a/arch/avr32/mach-at32ap/extint.c
-+++ b/arch/avr32/mach-at32ap/extint.c
-@@ -17,42 +17,83 @@
++#include <linux/dma-mapping.h>
+ #include <linux/atmel_pdc.h>
  
  #include <asm/io.h>
+@@ -47,6 +50,11 @@
  
--#include <asm/arch/sm.h>
--
--#include "sm.h"
-+/* EIC register offsets */
-+#define EIC_IER					0x0000
-+#define EIC_IDR					0x0004
-+#define EIC_IMR					0x0008
-+#define EIC_ISR					0x000c
-+#define EIC_ICR					0x0010
-+#define EIC_MODE				0x0014
-+#define EIC_EDGE				0x0018
-+#define EIC_LEVEL				0x001c
-+#define EIC_TEST				0x0020
-+#define EIC_NMIC				0x0024
+ #include "atmel_serial.h"
+ 
++#define SUPPORT_PDC
++#define PDC_BUFFER_SIZE		(L1_CACHE_BYTES << 3)
++#warning "Revisit"
++#define PDC_RX_TIMEOUT		(3 * 10)		/* 3 bytes */
 +
-+/* Bitfields in TEST */
-+#define EIC_TESTEN_OFFSET			31
-+#define EIC_TESTEN_SIZE				1
-+
-+/* Bitfields in NMIC */
-+#define EIC_EN_OFFSET				0
-+#define EIC_EN_SIZE				1
-+
-+/* Bit manipulation macros */
-+#define EIC_BIT(name)					\
-+	(1 << EIC_##name##_OFFSET)
-+#define EIC_BF(name,value)				\
-+	(((value) & ((1 << EIC_##name##_SIZE) - 1))	\
-+	 << EIC_##name##_OFFSET)
-+#define EIC_BFEXT(name,value)				\
-+	(((value) >> EIC_##name##_OFFSET)		\
-+	 & ((1 << EIC_##name##_SIZE) - 1))
-+#define EIC_BFINS(name,value,old)			\
-+	(((old) & ~(((1 << EIC_##name##_SIZE) - 1)	\
-+		    << EIC_##name##_OFFSET))		\
-+	 | EIC_BF(name,value))
-+
-+/* Register access macros */
-+#define eic_readl(port,reg)				\
-+	__raw_readl((port)->regs + EIC_##reg)
-+#define eic_writel(port,reg,value)			\
-+	__raw_writel((value), (port)->regs + EIC_##reg)
-+
-+struct eic {
-+	void __iomem *regs;
-+	struct irq_chip *chip;
-+	unsigned int first_irq;
+ #if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+ #define SUPPORT_SYSRQ
+ #endif
+@@ -107,6 +115,13 @@
+ static int (*atmel_open_hook)(struct uart_port *);
+ static void (*atmel_close_hook)(struct uart_port *);
+ 
++struct atmel_dma_buffer {
++	unsigned char	*buf;
++	dma_addr_t	dma_addr;
++	size_t		dma_size;
++	unsigned int	ofs;
 +};
- 
--static void eim_ack_irq(unsigned int irq)
-+static void eic_ack_irq(unsigned int irq)
- {
--	struct at32_sm *sm = get_irq_chip_data(irq);
--	sm_writel(sm, EIM_ICR, 1 << (irq - sm->eim_first_irq));
-+	struct eic *eic = get_irq_chip_data(irq);
-+	eic_writel(eic, ICR, 1 << (irq - eic->first_irq));
- }
- 
--static void eim_mask_irq(unsigned int irq)
-+static void eic_mask_irq(unsigned int irq)
- {
--	struct at32_sm *sm = get_irq_chip_data(irq);
--	sm_writel(sm, EIM_IDR, 1 << (irq - sm->eim_first_irq));
-+	struct eic *eic = get_irq_chip_data(irq);
-+	eic_writel(eic, IDR, 1 << (irq - eic->first_irq));
- }
- 
--static void eim_mask_ack_irq(unsigned int irq)
-+static void eic_mask_ack_irq(unsigned int irq)
- {
--	struct at32_sm *sm = get_irq_chip_data(irq);
--	sm_writel(sm, EIM_ICR, 1 << (irq - sm->eim_first_irq));
--	sm_writel(sm, EIM_IDR, 1 << (irq - sm->eim_first_irq));
-+	struct eic *eic = get_irq_chip_data(irq);
-+	eic_writel(eic, ICR, 1 << (irq - eic->first_irq));
-+	eic_writel(eic, IDR, 1 << (irq - eic->first_irq));
- }
- 
--static void eim_unmask_irq(unsigned int irq)
-+static void eic_unmask_irq(unsigned int irq)
- {
--	struct at32_sm *sm = get_irq_chip_data(irq);
--	sm_writel(sm, EIM_IER, 1 << (irq - sm->eim_first_irq));
-+	struct eic *eic = get_irq_chip_data(irq);
-+	eic_writel(eic, IER, 1 << (irq - eic->first_irq));
- }
- 
--static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
-+static int eic_set_irq_type(unsigned int irq, unsigned int flow_type)
- {
--	struct at32_sm *sm = get_irq_chip_data(irq);
-+	struct eic *eic = get_irq_chip_data(irq);
- 	struct irq_desc *desc;
--	unsigned int i = irq - sm->eim_first_irq;
-+	unsigned int i = irq - eic->first_irq;
- 	u32 mode, edge, level;
--	unsigned long flags;
- 	int ret = 0;
- 
- 	flow_type &= IRQ_TYPE_SENSE_MASK;
-@@ -60,11 +101,10 @@ static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
- 		flow_type = IRQ_TYPE_LEVEL_LOW;
- 
- 	desc = &irq_desc[irq];
--	spin_lock_irqsave(&sm->lock, flags);
- 
--	mode = sm_readl(sm, EIM_MODE);
--	edge = sm_readl(sm, EIM_EDGE);
--	level = sm_readl(sm, EIM_LEVEL);
-+	mode = eic_readl(eic, MODE);
-+	edge = eic_readl(eic, EDGE);
-+	level = eic_readl(eic, LEVEL);
- 
- 	switch (flow_type) {
- 	case IRQ_TYPE_LEVEL_LOW:
-@@ -89,9 +129,9 @@ static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
- 	}
- 
- 	if (ret == 0) {
--		sm_writel(sm, EIM_MODE, mode);
--		sm_writel(sm, EIM_EDGE, edge);
--		sm_writel(sm, EIM_LEVEL, level);
-+		eic_writel(eic, MODE, mode);
-+		eic_writel(eic, EDGE, edge);
-+		eic_writel(eic, LEVEL, level);
- 
- 		if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
- 			flow_type |= IRQ_LEVEL;
-@@ -99,35 +139,33 @@ static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
- 		desc->status |= flow_type;
- 	}
- 
--	spin_unlock_irqrestore(&sm->lock, flags);
--
- 	return ret;
- }
- 
--struct irq_chip eim_chip = {
--	.name		= "eim",
--	.ack		= eim_ack_irq,
--	.mask		= eim_mask_irq,
--	.mask_ack	= eim_mask_ack_irq,
--	.unmask		= eim_unmask_irq,
--	.set_type	= eim_set_irq_type,
-+struct irq_chip eic_chip = {
-+	.name		= "eic",
-+	.ack		= eic_ack_irq,
-+	.mask		= eic_mask_irq,
-+	.mask_ack	= eic_mask_ack_irq,
-+	.unmask		= eic_unmask_irq,
-+	.set_type	= eic_set_irq_type,
++
+ /*
+  * We wrap our port structure around the generic uart_port.
+  */
+@@ -114,10 +129,21 @@
+ 	struct uart_port	uart;		/* uart */
+ 	struct clk		*clk;		/* uart clock */
+ 	unsigned short		suspended;	/* is port suspended? */
++	int			break_active;	/* break being received */
++
++	short			use_dma_rx;	/* enable PDC receiver */
++	short			pdc_rx_idx;	/* current PDC RX buffer */
++	struct atmel_dma_buffer	pdc_rx[2];	/* PDC receier */
++
++	short			use_dma_tx;	/* enable PDC transmitter */
++	struct atmel_dma_buffer	pdc_tx;		/* PDC transmitter */
  };
  
--static void demux_eim_irq(unsigned int irq, struct irq_desc *desc)
-+static void demux_eic_irq(unsigned int irq, struct irq_desc *desc)
+ static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
+ 
++#define PDC_RX_BUF(port)	&(port)->pdc_rx[(port)->pdc_rx_idx]
++#define PDC_RX_SWITCH(port)	(port)->pdc_rx_idx = !(port)->pdc_rx_idx
++
+ #ifdef SUPPORT_SYSRQ
+ static struct console atmel_console;
+ #endif
+@@ -205,7 +231,12 @@
  {
--	struct at32_sm *sm = desc->handler_data;
-+	struct eic *eic = desc->handler_data;
- 	struct irq_desc *ext_desc;
- 	unsigned long status, pending;
- 	unsigned int i, ext_irq;
+ 	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
  
--	status = sm_readl(sm, EIM_ISR);
--	pending = status & sm_readl(sm, EIM_IMR);
-+	status = eic_readl(eic, ISR);
-+	pending = status & eic_readl(eic, IMR);
- 
- 	while (pending) {
- 		i = fls(pending) - 1;
- 		pending &= ~(1 << i);
- 
--		ext_irq = i + sm->eim_first_irq;
-+		ext_irq = i + eic->first_irq;
- 		ext_desc = irq_desc + ext_irq;
- 		if (ext_desc->status & IRQ_LEVEL)
- 			handle_level_irq(ext_irq, ext_desc);
-@@ -136,51 +174,85 @@ static void demux_eim_irq(unsigned int irq, struct irq_desc *desc)
- 	}
+-	UART_PUT_IDR(port, ATMEL_US_TXRDY);
++	if (atmel_port->use_dma_tx) {
++		UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);		/* disable PDC transmit */
++		UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
++	}
++	else
++		UART_PUT_IDR(port, ATMEL_US_TXRDY);
  }
  
--static int __init eim_init(void)
-+static int __init eic_probe(struct platform_device *pdev)
+ /*
+@@ -215,7 +246,17 @@
  {
--	struct at32_sm *sm = &system_manager;
-+	struct eic *eic;
-+	struct resource *regs;
- 	unsigned int i;
- 	unsigned int nr_irqs;
- 	unsigned int int_irq;
-+	int ret;
- 	u32 pattern;
+ 	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
  
--	/*
--	 * The EIM is really the same module as SM, so register
--	 * mapping, etc. has been taken care of already.
--	 */
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	int_irq = platform_get_irq(pdev, 0);
-+	if (!regs || !int_irq) {
-+		dev_dbg(&pdev->dev, "missing regs and/or irq resource\n");
-+		return -ENXIO;
+-	UART_PUT_IER(port, ATMEL_US_TXRDY);
++	if (atmel_port->use_dma_tx) {
++		if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
++			/* The transmitter is already running.  Yes, we
++			   really need this.*/
++			return;
++
++		UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
++		UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);		/* re-enable PDC transmit */
++	}
++	else
++		UART_PUT_IER(port, ATMEL_US_TXRDY);
+ }
+ 
+ /*
+@@ -225,7 +266,12 @@
+ {
+ 	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+ 
+-	UART_PUT_IDR(port, ATMEL_US_RXRDY);
++	if (atmel_port->use_dma_rx) {
++		UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS);		/* disable PDC receive */
++		UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
++	}
++	else
++		UART_PUT_IDR(port, ATMEL_US_RXRDY);
+ }
+ 
+ /*
+@@ -248,10 +294,139 @@
+ }
+ 
+ /*
++ * Receive data via the PDC.  A buffer has been fulled.
++ */
++static void atmel_pdc_endrx(struct uart_port *port)
++{
++	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++	struct tty_struct *tty = port->info->tty;
++	struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port);
++	unsigned int count;
++
++	count = pdc->dma_size - pdc->ofs;
++	if (likely(count > 0)) {
++		dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
++		tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
++		tty_flip_buffer_push(tty);
++
++		port->icount.rx += count;
 +	}
 +
-+	ret = -ENOMEM;
-+	eic = kzalloc(sizeof(struct eic), GFP_KERNEL);
-+	if (!eic) {
-+		dev_dbg(&pdev->dev, "no memory for eic structure\n");
-+		goto err_kzalloc;
++	/* Set this buffer as the next receive buffer */
++	pdc->ofs = 0;
++	UART_PUT_RNPR(port, pdc->dma_addr);
++	UART_PUT_RNCR(port, pdc->dma_size);
++
++	/* Switch to next buffer */
++	PDC_RX_SWITCH(atmel_port);		/* next PDC buffer */
++}
++
++/*
++ * Receive data via the PDC.  At least one byte was received, but the
++ * buffer was not full when the inter-character timeout expired.
++ */
++static void atmel_pdc_timeout(struct uart_port *port)
++{
++	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++	struct tty_struct *tty = port->info->tty;
++	struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port);
++	/* unsigned */ int ofs, count;
++
++	ofs = UART_GET_RPR(port) - pdc->dma_addr;	/* current DMA adress */
++	count = ofs - pdc->ofs;
++
++	if (likely(count > 0)) {
++		dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
++		tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
++		tty_flip_buffer_push(tty);
++
++		pdc->ofs = ofs;
++		port->icount.rx += count;
 +	}
 +
-+	eic->first_irq = EIM_IRQ_BASE + 32 * pdev->id;
-+	eic->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!eic->regs) {
-+		dev_dbg(&pdev->dev, "failed to map regs\n");
-+		goto err_ioremap;
++	/* reset the UART timeout */
++	UART_PUT_CR(port, ATMEL_US_STTTO);
++}
++
++/*
++ * Deal with parity, framing and overrun errors.
++ */
++static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status)
++{
++	/* clear error */
++	UART_PUT_CR(port, ATMEL_US_RSTSTA);
++
++	if (status & ATMEL_US_RXBRK) {
++		status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);	/* ignore side-effect */
++		port->icount.brk++;
 +	}
++	if (status & ATMEL_US_PARE)
++		port->icount.parity++;
++	if (status & ATMEL_US_FRAME)
++		port->icount.frame++;
++	if (status & ATMEL_US_OVRE)
++		port->icount.overrun++;
++}
++
++/*
++ * A transmission via the PDC is complete.
++ */
++static void atmel_pdc_endtx(struct uart_port *port)
++{
++	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++	struct circ_buf *xmit = &port->info->xmit;
++	struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
++
++	xmit->tail += pdc->ofs;
++	if (xmit->tail >= SERIAL_XMIT_SIZE)
++		xmit->tail -= SERIAL_XMIT_SIZE;
++
++	port->icount.tx += pdc->ofs;
++	pdc->ofs = 0;
++
++	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
++		uart_write_wakeup(port);
++}
++
++/*
++ * The PDC transmitter is idle, so either start the next transfer or
++ * disable the transmitter.
++ */
++static void atmel_pdc_txbufe(struct uart_port *port)
++{
++	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++	struct circ_buf *xmit = &port->info->xmit;
++	struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
++	int count;
++
++	if (!uart_circ_empty(xmit)) {
++		/* more to transmit - setup next transfer */
++		UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);			/* disable PDC transmit */
++		dma_sync_single_for_device(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE);
++
++		if (xmit->tail < xmit->head)
++			count = xmit->head - xmit->tail;
++		else
++			count = SERIAL_XMIT_SIZE - xmit->tail;
++		pdc->ofs = count;
++
++		UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
++		UART_PUT_TCR(port, count);
++		UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);			/* re-enable PDC transmit */
++	}
++	else {
++		/* nothing left to transmit - disable the transmitter */
++		UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);			/* disable PDC transmit */
++		UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
++	}
++}
++
++/*
+  * Characters received (called from interrupt handler)
+  */
+ static void atmel_rx_chars(struct uart_port *port)
+ {
++	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+ 	struct tty_struct *tty = port->info->tty;
+ 	unsigned int status, ch, flg;
+ 
+@@ -267,13 +442,29 @@
+ 		 * note that the error handling code is
+ 		 * out of the main execution path
+ 		 */
+-		if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME | ATMEL_US_OVRE | ATMEL_US_RXBRK))) {
++		if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
++				       | ATMEL_US_OVRE | ATMEL_US_RXBRK)
++			     || atmel_port->break_active)) {
+ 			UART_PUT_CR(port, ATMEL_US_RSTSTA);	/* clear error */
+-			if (status & ATMEL_US_RXBRK) {
++			if (status & ATMEL_US_RXBRK
++			    && !atmel_port->break_active) {
+ 				status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);	/* ignore side-effect */
+ 				port->icount.brk++;
++				atmel_port->break_active = 1;
++				UART_PUT_IER(port, ATMEL_US_RXBRK);
+ 				if (uart_handle_break(port))
+ 					goto ignore_char;
++			} else {
++				/*
++				 * This is either the end-of-break
++				 * condition or we've received at
++				 * least one character without RXBRK
++				 * being set. In both cases, the next
++				 * RXBRK will indicate start-of-break.
++				 */
++				UART_PUT_IDR(port, ATMEL_US_RXBRK);
++				status &= ~ATMEL_US_RXBRK;
++				atmel_port->break_active = 0;
+ 			}
+ 			if (status & ATMEL_US_PARE)
+ 				port->icount.parity++;
+@@ -349,9 +540,27 @@
+ 	status = UART_GET_CSR(port);
+ 	pending = status & UART_GET_IMR(port);
+ 	while (pending) {
++		/* PDC receive */
++		if (pending & ATMEL_US_ENDRX)
++			atmel_pdc_endrx(port);
++		if (pending & ATMEL_US_TIMEOUT)
++			atmel_pdc_timeout(port);
++		if (atmel_port->use_dma_rx && pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE | ATMEL_US_FRAME | ATMEL_US_PARE))
++			atmel_pdc_rxerr(port, pending);
++
+ 		/* Interrupt receive */
+ 		if (pending & ATMEL_US_RXRDY)
+ 			atmel_rx_chars(port);
++		else if (pending & ATMEL_US_RXBRK) {
++			/*
++			 * End of break detected. If it came along
++			 * with a character, atmel_rx_chars will
++			 * handle it.
++			 */
++			UART_PUT_CR(port, ATMEL_US_RSTSTA);
++			UART_PUT_IDR(port, ATMEL_US_RXBRK);
++			atmel_port->break_active = 0;
++		}
+ 
+ 		// TODO: All reads to CSR will clear these interrupts!
+ 		if (pending & ATMEL_US_RIIC) port->icount.rng++;
+@@ -363,6 +572,12 @@
+ 		if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC))
+ 			wake_up_interruptible(&port->info->delta_msr_wait);
+ 
++		/* PDC transmit */
++		if (pending & ATMEL_US_ENDTX)
++			atmel_pdc_endtx(port);
++		if (pending & ATMEL_US_TXBUFE)
++			atmel_pdc_txbufe(port);
++
+ 		/* Interrupt transmit */
+ 		if (pending & ATMEL_US_TXRDY)
+ 			atmel_tx_chars(port);
+@@ -401,6 +616,47 @@
+ 	}
  
  	/*
- 	 * Find out how many interrupt lines that are actually
- 	 * implemented in hardware.
++	 * Initialize DMA (if necessary)
++	 */
++	if (atmel_port->use_dma_rx) {
++		int i;
++
++		for (i = 0; i < 2; i++) {
++			struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
++
++			pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL);
++			if (pdc->buf == NULL) {
++				if (i != 0) {
++					dma_unmap_single(port->dev, atmel_port->pdc_rx[0].dma_addr, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
++					kfree(atmel_port->pdc_rx[0].buf);
++				}
++				free_irq(port->irq, port);
++				return -ENOMEM;
++			}
++			pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
++			pdc->dma_size = PDC_BUFFER_SIZE;
++			pdc->ofs = 0;
++		}
++
++		atmel_port->pdc_rx_idx = 0;
++
++		UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
++		UART_PUT_RCR(port, PDC_BUFFER_SIZE);
++
++		UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
++		UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
++	}
++	if (atmel_port->use_dma_tx) {
++		struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
++		struct circ_buf *xmit = &port->info->xmit;
++
++		pdc->buf = xmit->buf;
++		pdc->dma_addr = dma_map_single(port->dev, pdc->buf, SERIAL_XMIT_SIZE, DMA_TO_DEVICE);
++		pdc->dma_size = SERIAL_XMIT_SIZE;
++		pdc->ofs = 0;
++	}
++
++	/*
+ 	 * If there is a specific "open" function (to register
+ 	 * control line interrupts)
  	 */
--	sm_writel(sm, EIM_IDR, ~0UL);
--	sm_writel(sm, EIM_MODE, ~0UL);
--	pattern = sm_readl(sm, EIM_MODE);
-+	eic_writel(eic, IDR, ~0UL);
-+	eic_writel(eic, MODE, ~0UL);
-+	pattern = eic_readl(eic, MODE);
- 	nr_irqs = fls(pattern);
+@@ -418,8 +674,16 @@
+ 	UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
+ 	UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);		/* enable xmit & rcvr */
  
- 	/* Trigger on falling edge unless overridden by driver */
--	sm_writel(sm, EIM_MODE, 0UL);
--	sm_writel(sm, EIM_EDGE, 0UL);
-+	eic_writel(eic, MODE, 0UL);
-+	eic_writel(eic, EDGE, 0UL);
- 
--	sm->eim_chip = &eim_chip;
-+	eic->chip = &eic_chip;
- 
- 	for (i = 0; i < nr_irqs; i++) {
- 		/* NOTE the handler we set here is ignored by the demux */
--		set_irq_chip_and_handler(sm->eim_first_irq + i, &eim_chip,
-+		set_irq_chip_and_handler(eic->first_irq + i, &eic_chip,
- 					 handle_level_irq);
--		set_irq_chip_data(sm->eim_first_irq + i, sm);
-+		set_irq_chip_data(eic->first_irq + i, eic);
- 	}
- 
--	int_irq = platform_get_irq_byname(sm->pdev, "eim");
--
--	set_irq_chained_handler(int_irq, demux_eim_irq);
--	set_irq_data(int_irq, sm);
-+	set_irq_chained_handler(int_irq, demux_eic_irq);
-+	set_irq_data(int_irq, eic);
- 
--	printk("EIM: External Interrupt Module at 0x%p, IRQ %u\n",
--	       sm->regs, int_irq);
--	printk("EIM: Handling %u external IRQs, starting with IRQ %u\n",
--	       nr_irqs, sm->eim_first_irq);
-+	dev_info(&pdev->dev,
-+		 "External Interrupt Controller at 0x%p, IRQ %u\n",
-+		 eic->regs, int_irq);
-+	dev_info(&pdev->dev,
-+		 "Handling %u external IRQs, starting with IRQ %u\n",
-+		 nr_irqs, eic->first_irq);
+-	UART_PUT_IER(port, ATMEL_US_RXRDY);		/* enable receive only */
++	if (atmel_port->use_dma_rx) {
++		UART_PUT_RTOR(port, PDC_RX_TIMEOUT);		/* set UART timeout */
++		UART_PUT_CR(port, ATMEL_US_STTTO);
  
++		UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
++		UART_PUT_PTCR(port, ATMEL_PDC_RXTEN);		/* enable PDC controller */
++	}
++	else
++		UART_PUT_IER(port, ATMEL_US_RXRDY);		/* enable receive only */
++
  	return 0;
-+
-+err_ioremap:
-+	kfree(eic);
-+err_kzalloc:
-+	return ret;
-+}
-+
-+static struct platform_driver eic_driver = {
-+	.driver = {
-+		.name = "at32_eic",
-+	},
-+};
-+
-+static int __init eic_init(void)
-+{
-+	return platform_driver_probe(&eic_driver, eic_probe);
- }
--arch_initcall(eim_init);
-+arch_initcall(eic_init);
-diff --git a/arch/avr32/mach-at32ap/gpio-dev.c b/arch/avr32/mach-at32ap/gpio-dev.c
-new file mode 100644
-index 0000000..3d4810d
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/gpio-dev.c
-@@ -0,0 +1,570 @@
-+/*
-+ * GPIO /dev and configfs interface
-+ *
-+ * Copyright (C) 2006-2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/configfs.h>
-+#include <linux/cdev.h>
-+#include <linux/fs.h>
-+#include <linux/interrupt.h>
-+#include <linux/poll.h>
-+#include <linux/uaccess.h>
-+#include <linux/wait.h>
-+
-+#include <asm/gpio.h>
-+#include <asm/arch/portmux.h>
-+
-+#define GPIO_DEV_MAX			8
-+
-+static struct class *gpio_dev_class;
-+static dev_t gpio_devt;
-+
-+struct gpio_item {
-+	spinlock_t lock;
-+
-+	int enabled;
-+	int initialized;
-+	int port;
-+	u32 pin_mask;
-+	u32 oe_mask;
-+
-+	/* Pin state last time we read it (for blocking reads) */
-+	u32 pin_state;
-+	int changed;
-+
-+	wait_queue_head_t change_wq;
-+	struct fasync_struct *async_queue;
-+
-+	int id;
-+	struct class_device *gpio_dev;
-+	struct cdev char_dev;
-+	struct config_item item;
-+};
-+
-+struct gpio_attribute {
-+	struct configfs_attribute attr;
-+	ssize_t (*show)(struct gpio_item *, char *);
-+	ssize_t (*store)(struct gpio_item *, const char *, size_t);
-+};
-+
-+static irqreturn_t gpio_dev_interrupt(int irq, void *dev_id)
-+{
-+	struct gpio_item *gpio = dev_id;
-+	u32 old_state, new_state;
-+
-+	old_state = gpio->pin_state;
-+	new_state = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
-+	gpio->pin_state = new_state;
-+
-+	if (new_state != old_state) {
-+		gpio->changed = 1;
-+		wake_up_interruptible(&gpio->change_wq);
-+
-+		if (gpio->async_queue)
-+			kill_fasync(&gpio->async_queue, SIGIO, POLL_IN);
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int gpio_dev_open(struct inode *inode, struct file *file)
-+{
-+	struct gpio_item *gpio = container_of(inode->i_cdev,
-+					      struct gpio_item,
-+					      char_dev);
-+	unsigned int irq;
-+	unsigned int i;
-+	int ret;
-+
-+	nonseekable_open(inode, file);
-+	config_item_get(&gpio->item);
-+	file->private_data = gpio;
-+
-+	gpio->pin_state = at32_gpio_get_value_multiple(gpio->port,
-+						       gpio->pin_mask);
-+	gpio->changed = 1;
-+
-+	for (i = 0; i < 32; i++) {
-+		if (gpio->pin_mask & (1 << i)) {
-+			irq = gpio_to_irq(32 * gpio->port + i);
-+			ret = request_irq(irq, gpio_dev_interrupt, 0,
-+					  "gpio-dev", gpio);
-+			if (ret)
-+				goto err_irq;
-+		}
-+	}
-+
-+	return 0;
-+
-+err_irq:
-+	while (i--) {
-+		if (gpio->pin_mask & (1 << i)) {
-+			irq = gpio_to_irq(32 * gpio->port + i);
-+			free_irq(irq, gpio);
-+		}
-+	}
-+
-+	config_item_put(&gpio->item);
-+
-+	return ret;
-+}
-+
-+static int gpio_dev_fasync(int fd, struct file *file, int mode)
-+{
-+	struct gpio_item *gpio = file->private_data;
-+
-+	return fasync_helper(fd, file, mode, &gpio->async_queue);
-+}
-+
-+static int gpio_dev_release(struct inode *inode, struct file *file)
-+{
-+	struct gpio_item *gpio = file->private_data;
-+	unsigned int irq;
-+	unsigned int i;
-+
-+	gpio_dev_fasync(-1, file, 0);
-+
-+	for (i = 0; i < 32; i++) {
-+		if (gpio->pin_mask & (1 << i)) {
-+			irq = gpio_to_irq(32 * gpio->port + i);
-+			free_irq(irq, gpio);
-+		}
-+	}
-+
-+	config_item_put(&gpio->item);
-+
-+	return 0;
-+}
-+
-+static unsigned int gpio_dev_poll(struct file *file, poll_table *wait)
-+{
-+	struct gpio_item *gpio = file->private_data;
-+	unsigned int mask = 0;
-+
-+	poll_wait(file, &gpio->change_wq, wait);
-+	if (gpio->changed)
-+		mask |= POLLIN | POLLRDNORM;
-+
-+	return mask;
-+}
-+
-+static ssize_t gpio_dev_read(struct file *file, char __user *buf,
-+			     size_t count, loff_t *offset)
-+{
-+	struct gpio_item *gpio = file->private_data;
-+	u32 value;
-+
-+	spin_lock_irq(&gpio->lock);
-+	while (!gpio->changed) {
-+		spin_unlock_irq(&gpio->lock);
-+
-+		if (file->f_flags & O_NONBLOCK)
-+			return -EAGAIN;
-+
-+		if (wait_event_interruptible(gpio->change_wq, gpio->changed))
-+			return -ERESTARTSYS;
-+
-+		spin_lock_irq(&gpio->lock);
-+	}
-+
-+	gpio->changed = 0;
-+	value = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
-+
-+	spin_unlock_irq(&gpio->lock);
-+
-+	count = min(count, (size_t)4);
-+	if (copy_to_user(buf, &value, count))
-+		return -EFAULT;
-+
-+	return count;
-+}
-+
-+static ssize_t gpio_dev_write(struct file *file, const char __user *buf,
-+			      size_t count, loff_t *offset)
-+{
-+	struct gpio_item *gpio = file->private_data;
-+	u32 value = 0;
-+	u32 mask = ~0UL;
-+
-+	count = min(count, (size_t)4);
-+	if (copy_from_user(&value, buf, count))
-+		return -EFAULT;
-+
-+	/* Assuming big endian */
-+	mask <<= (4 - count) * 8;
-+	mask &= gpio->pin_mask;
-+
-+	at32_gpio_set_value_multiple(gpio->port, value, mask);
-+
-+	return count;
-+}
-+
-+static struct file_operations gpio_dev_fops = {
-+	.owner		= THIS_MODULE,
-+	.llseek		= no_llseek,
-+	.open		= gpio_dev_open,
-+	.release	= gpio_dev_release,
-+	.fasync		= gpio_dev_fasync,
-+	.poll		= gpio_dev_poll,
-+	.read		= gpio_dev_read,
-+	.write		= gpio_dev_write,
-+};
-+
-+static struct gpio_item *to_gpio_item(struct config_item *item)
-+{
-+	return item ? container_of(item, struct gpio_item, item) : NULL;
-+}
-+
-+static ssize_t gpio_show_gpio_id(struct gpio_item *gpio, char *page)
-+{
-+	return sprintf(page, "%d\n", gpio->port);
-+}
-+
-+static ssize_t gpio_store_gpio_id(struct gpio_item *gpio,
-+				  const char *page, size_t count)
-+{
-+	unsigned long id;
-+	char *p = (char *)page;
-+	ssize_t ret = -EINVAL;
-+
-+	id = simple_strtoul(p, &p, 0);
-+	if (!p || (*p && (*p != '\n')))
-+		return -EINVAL;
-+
-+	/* Switching PIO is not allowed when live... */
-+	spin_lock(&gpio->lock);
-+	if (!gpio->enabled) {
-+		ret = -ENXIO;
-+		if (at32_gpio_port_is_valid(id)) {
-+			gpio->port = id;
-+			ret = count;
-+		}
-+	}
-+	spin_unlock(&gpio->lock);
-+
-+	return ret;
-+}
-+
-+static ssize_t gpio_show_pin_mask(struct gpio_item *gpio, char *page)
-+{
-+	return sprintf(page, "0x%08x\n", gpio->pin_mask);
-+}
-+
-+static ssize_t gpio_store_pin_mask(struct gpio_item *gpio,
-+				   const char *page, size_t count)
-+{
-+	u32 new_mask;
-+	char *p = (char *)page;
-+	ssize_t ret = -EINVAL;
-+
-+	new_mask = simple_strtoul(p, &p, 0);
-+	if (!p || (*p && (*p != '\n')))
-+		return -EINVAL;
-+
-+	/* Can't update the pin mask while live. */
-+	spin_lock(&gpio->lock);
-+	if (!gpio->enabled) {
-+		gpio->oe_mask &= new_mask;
-+		gpio->pin_mask = new_mask;
-+		ret = count;
-+	}
-+	spin_unlock(&gpio->lock);
-+
-+	return ret;
-+}
-+
-+static ssize_t gpio_show_oe_mask(struct gpio_item *gpio, char *page)
-+{
-+	return sprintf(page, "0x%08x\n", gpio->oe_mask);
-+}
-+
-+static ssize_t gpio_store_oe_mask(struct gpio_item *gpio,
-+				  const char *page, size_t count)
-+{
-+	u32 mask;
-+	char *p = (char *)page;
-+	ssize_t ret = -EINVAL;
-+
-+	mask = simple_strtoul(p, &p, 0);
-+	if (!p || (*p && (*p != '\n')))
-+		return -EINVAL;
-+
-+	spin_lock(&gpio->lock);
-+	if (!gpio->enabled) {
-+		gpio->oe_mask = mask & gpio->pin_mask;
-+		ret = count;
-+	}
-+	spin_unlock(&gpio->lock);
-+
-+	return ret;
-+}
-+
-+static ssize_t gpio_show_enabled(struct gpio_item *gpio, char *page)
-+{
-+	return sprintf(page, "%d\n", gpio->enabled);
-+}
-+
-+static ssize_t gpio_store_enabled(struct gpio_item *gpio,
-+				  const char *page, size_t count)
-+{
-+	char *p = (char *)page;
-+	int enabled;
-+	int ret;
-+
-+	enabled = simple_strtoul(p, &p, 0);
-+	if (!p || (*p && (*p != '\n')))
-+		return -EINVAL;
-+
-+	/* make it a boolean value */
-+	enabled = !!enabled;
-+
-+	if (gpio->enabled == enabled)
-+		/* No change; do nothing. */
-+		return count;
-+
-+	BUG_ON(gpio->id >= GPIO_DEV_MAX);
-+
-+	if (!enabled) {
-+		class_device_unregister(gpio->gpio_dev);
-+		cdev_del(&gpio->char_dev);
-+		at32_deselect_pins(gpio->port, gpio->pin_mask);
-+		gpio->initialized = 0;
-+	} else {
-+		if (gpio->port < 0 || !gpio->pin_mask)
-+			return -ENODEV;
-+	}
-+
-+	/* Disallow any updates to gpio_id or pin_mask */
-+	spin_lock(&gpio->lock);
-+	gpio->enabled = enabled;
-+	spin_unlock(&gpio->lock);
-+
-+	if (!enabled)
-+		return count;
-+
-+	/* Now, try to allocate the pins */
-+	ret = at32_select_gpio_pins(gpio->port, gpio->pin_mask, gpio->oe_mask);
-+	if (ret)
-+		goto err_alloc_pins;
-+
-+	gpio->initialized = 1;
-+
-+	cdev_init(&gpio->char_dev, &gpio_dev_fops);
-+	gpio->char_dev.owner = THIS_MODULE;
-+	ret = cdev_add(&gpio->char_dev, MKDEV(MAJOR(gpio_devt), gpio->id), 1);
-+	if (ret < 0)
-+		goto err_cdev_add;
-+	gpio->gpio_dev = class_device_create(gpio_dev_class, NULL,
-+					     MKDEV(MAJOR(gpio_devt), gpio->id),
-+					     NULL,
-+					     "gpio%d", gpio->id);
-+	if (IS_ERR(gpio->gpio_dev)) {
-+		printk(KERN_ERR "failed to create gpio%d\n", gpio->id);
-+		ret = PTR_ERR(gpio->gpio_dev);
-+		goto err_class_dev;
-+	}
-+
-+	printk(KERN_INFO "created gpio%d (port%d/0x%08x) as (%d:%d)\n",
-+	       gpio->id, gpio->port, gpio->pin_mask,
-+	       MAJOR(gpio->gpio_dev->devt), MINOR(gpio->gpio_dev->devt));
-+
-+	return 0;
-+
-+err_class_dev:
-+	cdev_del(&gpio->char_dev);
-+err_cdev_add:
-+	at32_deselect_pins(gpio->port, gpio->pin_mask);
-+	gpio->initialized = 0;
-+err_alloc_pins:
-+	spin_lock(&gpio->lock);
-+	gpio->enabled = 0;
-+	spin_unlock(&gpio->lock);
-+
-+	return ret;
-+}
-+
-+static struct gpio_attribute gpio_item_attr_gpio_id = {
-+	.attr = {
-+		.ca_owner = THIS_MODULE,
-+		.ca_name = "gpio_id",
-+		.ca_mode = S_IRUGO | S_IWUSR,
-+	},
-+	.show = gpio_show_gpio_id,
-+	.store = gpio_store_gpio_id,
-+};
-+static struct gpio_attribute gpio_item_attr_pin_mask = {
-+	.attr = {
-+		.ca_owner = THIS_MODULE,
-+		.ca_name = "pin_mask",
-+		.ca_mode = S_IRUGO | S_IWUSR,
-+	},
-+	.show = gpio_show_pin_mask,
-+	.store = gpio_store_pin_mask,
-+};
-+static struct gpio_attribute gpio_item_attr_oe_mask = {
-+	.attr = {
-+		.ca_owner = THIS_MODULE,
-+		.ca_name = "oe_mask",
-+		.ca_mode = S_IRUGO | S_IWUSR,
-+	},
-+	.show = gpio_show_oe_mask,
-+	.store = gpio_store_oe_mask,
-+};
-+static struct gpio_attribute gpio_item_attr_enabled = {
-+	.attr = {
-+		.ca_owner = THIS_MODULE,
-+		.ca_name = "enabled",
-+		.ca_mode = S_IRUGO | S_IWUSR,
-+	},
-+	.show = gpio_show_enabled,
-+	.store = gpio_store_enabled,
-+};
-+
-+static struct configfs_attribute *gpio_item_attrs[] = {
-+	&gpio_item_attr_gpio_id.attr,
-+	&gpio_item_attr_pin_mask.attr,
-+	&gpio_item_attr_oe_mask.attr,
-+	&gpio_item_attr_enabled.attr,
-+	NULL,
-+};
-+
-+static ssize_t gpio_show_attr(struct config_item *item,
-+			      struct configfs_attribute *attr,
-+			      char *page)
-+{
-+	struct gpio_item *gpio_item = to_gpio_item(item);
-+	struct gpio_attribute *gpio_attr
-+		= container_of(attr, struct gpio_attribute, attr);
-+	ssize_t ret = 0;
-+
-+	if (gpio_attr->show)
-+		ret = gpio_attr->show(gpio_item, page);
-+	return ret;
-+}
-+
-+static ssize_t gpio_store_attr(struct config_item *item,
-+			       struct configfs_attribute *attr,
-+			       const char *page, size_t count)
-+{
-+	struct gpio_item *gpio_item = to_gpio_item(item);
-+	struct gpio_attribute *gpio_attr
-+		= container_of(attr, struct gpio_attribute, attr);
-+	ssize_t ret = -EINVAL;
-+
-+	if (gpio_attr->store)
-+		ret = gpio_attr->store(gpio_item, page, count);
-+	return ret;
-+}
-+
-+static void gpio_release(struct config_item *item)
-+{
-+	kfree(to_gpio_item(item));
-+}
-+
-+static struct configfs_item_operations gpio_item_ops = {
-+	.release		= gpio_release,
-+	.show_attribute		= gpio_show_attr,
-+	.store_attribute	= gpio_store_attr,
-+};
-+
-+static struct config_item_type gpio_item_type = {
-+	.ct_item_ops	= &gpio_item_ops,
-+	.ct_attrs	= gpio_item_attrs,
-+	.ct_owner	= THIS_MODULE,
-+};
-+
-+static struct config_item *gpio_make_item(struct config_group *group,
-+					  const char *name)
-+{
-+	static int next_id;
-+	struct gpio_item *gpio;
-+
-+	if (next_id >= GPIO_DEV_MAX)
-+		return NULL;
-+
-+	gpio = kzalloc(sizeof(struct gpio_item), GFP_KERNEL);
-+	if (!gpio)
-+		return NULL;
-+
-+	gpio->id = next_id++;
-+	config_item_init_type_name(&gpio->item, name, &gpio_item_type);
-+	spin_lock_init(&gpio->lock);
-+	init_waitqueue_head(&gpio->change_wq);
-+
-+	return &gpio->item;
-+}
-+
-+static void gpio_drop_item(struct config_group *group,
-+			   struct config_item *item)
-+{
-+	struct gpio_item *gpio = to_gpio_item(item);
-+
-+	spin_lock(&gpio->lock);
-+	if (gpio->enabled) {
-+		class_device_unregister(gpio->gpio_dev);
-+		cdev_del(&gpio->char_dev);
-+	}
-+
-+	if (gpio->initialized) {
-+		at32_deselect_pins(gpio->port, gpio->pin_mask);
-+		gpio->initialized = 0;
-+		gpio->enabled = 0;
-+	}
-+	spin_unlock(&gpio->lock);
-+}
-+
-+static struct configfs_group_operations gpio_group_ops = {
-+	.make_item	= gpio_make_item,
-+	.drop_item	= gpio_drop_item,
-+};
-+
-+static struct config_item_type gpio_group_type = {
-+	.ct_group_ops	= &gpio_group_ops,
-+	.ct_owner	= THIS_MODULE,
-+};
-+
-+static struct configfs_subsystem gpio_subsys = {
-+	.su_group = {
-+		.cg_item = {
-+			 .ci_namebuf = "gpio",
-+			 .ci_type = &gpio_group_type,
-+		 },
-+	},
-+};
-+
-+static int __init gpio_dev_init(void)
-+{
-+	int err;
-+
-+	gpio_dev_class = class_create(THIS_MODULE, "gpio-dev");
-+	if (IS_ERR(gpio_dev_class)) {
-+		err = PTR_ERR(gpio_dev_class);
-+		goto err_class_create;
-+	}
-+
-+	err = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpio");
-+	if (err < 0)
-+		goto err_alloc_chrdev;
-+
-+	/* Configfs initialization */
-+	config_group_init(&gpio_subsys.su_group);
-+	init_MUTEX(&gpio_subsys.su_sem);
-+	err = configfs_register_subsystem(&gpio_subsys);
-+	if (err)
-+		goto err_register_subsys;
-+
-+	return 0;
-+
-+err_register_subsys:
-+	unregister_chrdev_region(gpio_devt, GPIO_DEV_MAX);
-+err_alloc_chrdev:
-+	class_destroy(gpio_dev_class);
-+err_class_create:
-+	printk(KERN_WARNING "Failed to initialize gpio /dev interface\n");
-+	return err;
-+}
-+late_initcall(gpio_dev_init);
-diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
-index 1eb99b8..153bb9a 100644
---- a/arch/avr32/mach-at32ap/pio.c
-+++ b/arch/avr32/mach-at32ap/pio.c
-@@ -158,6 +158,82 @@ fail:
- 	dump_stack();
  }
  
-+#ifdef CONFIG_GPIO_DEV
-+
-+/* Gang allocators and accessors; used by the GPIO /dev driver */
-+int at32_gpio_port_is_valid(unsigned int port)
-+{
-+	return port < MAX_NR_PIO_DEVICES && pio_dev[port].regs != NULL;
-+}
-+
-+int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask)
-+{
-+	struct pio_device *pio;
-+	u32 old, new;
-+
-+	pio = &pio_dev[port];
-+	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs || (oe_mask & ~pins));
-+
-+	/* Try to allocate the pins */
-+	do {
-+		old = pio->pinmux_mask;
-+		if (old & pins)
-+			return -EBUSY;
-+
-+		new = old | pins;
-+	} while (cmpxchg(&pio->pinmux_mask, old, new) != old);
-+
-+	/* That went well, now configure the port */
-+	pio_writel(pio, OER, oe_mask);
-+	pio_writel(pio, PER, pins);
-+
-+	return 0;
-+}
-+
-+void at32_deselect_pins(unsigned int port, u32 pins)
-+{
-+	struct pio_device *pio;
-+	u32 old, new;
-+
-+	pio = &pio_dev[port];
-+	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
-+
-+	/* Return to a "safe" mux configuration */
-+	pio_writel(pio, PUER, pins);
-+	pio_writel(pio, ODR, pins);
-+
-+	/* Deallocate the pins */
-+	do {
-+		old = pio->pinmux_mask;
-+		new = old & ~pins;
-+	} while (cmpxchg(&pio->pinmux_mask, old, new) != old);
-+}
-+
-+u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins)
-+{
-+	struct pio_device *pio;
-+
-+	pio = &pio_dev[port];
-+	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
-+
-+	return pio_readl(pio, PDSR) & pins;
-+}
-+
-+void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask)
-+{
-+	struct pio_device *pio;
-+
-+	pio = &pio_dev[port];
-+	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
-+
-+	/* No atomic updates for now... */
-+	pio_writel(pio, CODR, ~value & mask);
-+	pio_writel(pio, SODR, value & mask);
-+}
-+
-+#endif /* CONFIG_GPIO_DEV */
-+
-+
- /*--------------------------------------------------------------------------*/
+@@ -431,6 +695,31 @@
+ 	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
  
- /* GPIO API */
-diff --git a/arch/avr32/mach-at32ap/pm.h b/arch/avr32/mach-at32ap/pm.h
-new file mode 100644
-index 0000000..a1f8ace
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/pm.h
-@@ -0,0 +1,112 @@
-+/*
-+ * Register definitions for the Power Manager (PM)
-+ */
-+#ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
-+#define __ARCH_AVR32_MACH_AT32AP_PM_H__
+ 	/*
++	 * Ensure everything is stopped.
++	 */
++	atmel_stop_rx(port);
++	atmel_stop_tx(port);
 +
-+/* PM register offsets */
-+#define PM_MCCTRL				0x0000
-+#define PM_CKSEL				0x0004
-+#define PM_CPU_MASK				0x0008
-+#define PM_HSB_MASK				0x000c
-+#define PM_PBA_MASK				0x0010
-+#define PM_PBB_MASK				0x0014
-+#define PM_PLL0					0x0020
-+#define PM_PLL1					0x0024
-+#define PM_IER					0x0040
-+#define PM_IDR					0x0044
-+#define PM_IMR					0x0048
-+#define PM_ISR					0x004c
-+#define PM_ICR					0x0050
-+#define PM_GCCTRL(x)				(0x0060 + 4 * (x))
-+#define PM_RCAUSE				0x00c0
++	/*
++	 * Shut-down the DMA.
++	 */
++	if (atmel_port->use_dma_rx) {
++		int i;
 +
-+/* Bitfields in CKSEL */
-+#define PM_CPUSEL_OFFSET			0
-+#define PM_CPUSEL_SIZE				3
-+#define PM_CPUDIV_OFFSET			7
-+#define PM_CPUDIV_SIZE				1
-+#define PM_HSBSEL_OFFSET			8
-+#define PM_HSBSEL_SIZE				3
-+#define PM_HSBDIV_OFFSET			15
-+#define PM_HSBDIV_SIZE				1
-+#define PM_PBASEL_OFFSET			16
-+#define PM_PBASEL_SIZE				3
-+#define PM_PBADIV_OFFSET			23
-+#define PM_PBADIV_SIZE				1
-+#define PM_PBBSEL_OFFSET			24
-+#define PM_PBBSEL_SIZE				3
-+#define PM_PBBDIV_OFFSET			31
-+#define PM_PBBDIV_SIZE				1
++		for (i = 0; i < 2; i++) {
++			struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
 +
-+/* Bitfields in PLL0 */
-+#define PM_PLLEN_OFFSET				0
-+#define PM_PLLEN_SIZE				1
-+#define PM_PLLOSC_OFFSET			1
-+#define PM_PLLOSC_SIZE				1
-+#define PM_PLLOPT_OFFSET			2
-+#define PM_PLLOPT_SIZE				3
-+#define PM_PLLDIV_OFFSET			8
-+#define PM_PLLDIV_SIZE				8
-+#define PM_PLLMUL_OFFSET			16
-+#define PM_PLLMUL_SIZE				8
-+#define PM_PLLCOUNT_OFFSET			24
-+#define PM_PLLCOUNT_SIZE			6
-+#define PM_PLLTEST_OFFSET			31
-+#define PM_PLLTEST_SIZE				1
++			dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
++			kfree(pdc->buf);
++		}
++	}
++	if (atmel_port->use_dma_tx) {
++		struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
 +
-+/* Bitfields in ICR */
-+#define PM_LOCK0_OFFSET				0
-+#define PM_LOCK0_SIZE				1
-+#define PM_LOCK1_OFFSET				1
-+#define PM_LOCK1_SIZE				1
-+#define PM_WAKE_OFFSET				2
-+#define PM_WAKE_SIZE				1
-+#define PM_CKRDY_OFFSET				5
-+#define PM_CKRDY_SIZE				1
-+#define PM_MSKRDY_OFFSET			6
-+#define PM_MSKRDY_SIZE				1
++		dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE);
++	}
 +
-+/* Bitfields in GCCTRL0 */
-+#define PM_OSCSEL_OFFSET			0
-+#define PM_OSCSEL_SIZE				1
-+#define PM_PLLSEL_OFFSET			1
-+#define PM_PLLSEL_SIZE				1
-+#define PM_CEN_OFFSET				2
-+#define PM_CEN_SIZE				1
-+#define PM_DIVEN_OFFSET				4
-+#define PM_DIVEN_SIZE				1
-+#define PM_DIV_OFFSET				8
-+#define PM_DIV_SIZE				8
-+
-+/* Bitfields in RCAUSE */
-+#define PM_POR_OFFSET				0
-+#define PM_POR_SIZE				1
-+#define PM_EXT_OFFSET				2
-+#define PM_EXT_SIZE				1
-+#define PM_WDT_OFFSET				3
-+#define PM_WDT_SIZE				1
-+#define PM_NTAE_OFFSET				4
-+#define PM_NTAE_SIZE				1
-+
-+/* Bit manipulation macros */
-+#define PM_BIT(name)					\
-+	(1 << PM_##name##_OFFSET)
-+#define PM_BF(name,value)				\
-+	(((value) & ((1 << PM_##name##_SIZE) - 1))	\
-+	 << PM_##name##_OFFSET)
-+#define PM_BFEXT(name,value)				\
-+	(((value) >> PM_##name##_OFFSET)		\
-+	 & ((1 << PM_##name##_SIZE) - 1))
-+#define PM_BFINS(name,value,old)\
-+	(((old) & ~(((1 << PM_##name##_SIZE) - 1)	\
-+		    << PM_##name##_OFFSET))		\
-+	 | PM_BF(name,value))
-+
-+/* Register access macros */
-+#define pm_readl(reg)							\
-+	__raw_readl((void __iomem *)AT32_PM_BASE + PM_##reg)
-+#define pm_writel(reg,value)						\
-+	__raw_writel((value), (void __iomem *)AT32_PM_BASE + PM_##reg)
-+
-+#endif /* __ARCH_AVR32_MACH_AT32AP_PM_H__ */
-diff --git a/arch/avr32/mach-at32ap/sm.h b/arch/avr32/mach-at32ap/sm.h
-deleted file mode 100644
-index cad02b5..0000000
---- a/arch/avr32/mach-at32ap/sm.h
-+++ /dev/null
-@@ -1,242 +0,0 @@
--/*
-- * Register definitions for SM
-- *
-- * System Manager
-- */
--#ifndef __ASM_AVR32_SM_H__
--#define __ASM_AVR32_SM_H__
--
--/* SM register offsets */
--#define SM_PM_MCCTRL                            0x0000
--#define SM_PM_CKSEL                             0x0004
--#define SM_PM_CPU_MASK                          0x0008
--#define SM_PM_HSB_MASK                          0x000c
--#define SM_PM_PBA_MASK                         0x0010
--#define SM_PM_PBB_MASK                         0x0014
--#define SM_PM_PLL0                              0x0020
--#define SM_PM_PLL1                              0x0024
--#define SM_PM_VCTRL                             0x0030
--#define SM_PM_VMREF                             0x0034
--#define SM_PM_VMV                               0x0038
--#define SM_PM_IER                               0x0040
--#define SM_PM_IDR                               0x0044
--#define SM_PM_IMR                               0x0048
--#define SM_PM_ISR                               0x004c
--#define SM_PM_ICR                               0x0050
--#define SM_PM_GCCTRL                            0x0060
--#define SM_RTC_CTRL                             0x0080
--#define SM_RTC_VAL                              0x0084
--#define SM_RTC_TOP                              0x0088
--#define SM_RTC_IER                              0x0090
--#define SM_RTC_IDR                              0x0094
--#define SM_RTC_IMR                              0x0098
--#define SM_RTC_ISR                              0x009c
--#define SM_RTC_ICR                              0x00a0
--#define SM_WDT_CTRL                             0x00b0
--#define SM_WDT_CLR                              0x00b4
--#define SM_WDT_EXT                              0x00b8
--#define SM_RC_RCAUSE                            0x00c0
--#define SM_EIM_IER                              0x0100
--#define SM_EIM_IDR                              0x0104
--#define SM_EIM_IMR                              0x0108
--#define SM_EIM_ISR                              0x010c
--#define SM_EIM_ICR                              0x0110
--#define SM_EIM_MODE                             0x0114
--#define SM_EIM_EDGE                             0x0118
--#define SM_EIM_LEVEL                            0x011c
--#define SM_EIM_TEST                             0x0120
--#define SM_EIM_NMIC                             0x0124
--
--/* Bitfields in PM_MCCTRL */
--
--/* Bitfields in PM_CKSEL */
--#define SM_CPUSEL_OFFSET                        0
--#define SM_CPUSEL_SIZE                          3
--#define SM_CPUDIV_OFFSET                        7
--#define SM_CPUDIV_SIZE                          1
--#define SM_HSBSEL_OFFSET                        8
--#define SM_HSBSEL_SIZE                          3
--#define SM_HSBDIV_OFFSET                        15
--#define SM_HSBDIV_SIZE                          1
--#define SM_PBASEL_OFFSET                       16
--#define SM_PBASEL_SIZE                         3
--#define SM_PBADIV_OFFSET                       23
--#define SM_PBADIV_SIZE                         1
--#define SM_PBBSEL_OFFSET                       24
--#define SM_PBBSEL_SIZE                         3
--#define SM_PBBDIV_OFFSET                       31
--#define SM_PBBDIV_SIZE                         1
--
--/* Bitfields in PM_CPU_MASK */
--
--/* Bitfields in PM_HSB_MASK */
--
--/* Bitfields in PM_PBA_MASK */
--
--/* Bitfields in PM_PBB_MASK */
--
--/* Bitfields in PM_PLL0 */
--#define SM_PLLEN_OFFSET                         0
--#define SM_PLLEN_SIZE                           1
--#define SM_PLLOSC_OFFSET                        1
--#define SM_PLLOSC_SIZE                          1
--#define SM_PLLOPT_OFFSET                        2
--#define SM_PLLOPT_SIZE                          3
--#define SM_PLLDIV_OFFSET                        8
--#define SM_PLLDIV_SIZE                          8
--#define SM_PLLMUL_OFFSET                        16
--#define SM_PLLMUL_SIZE                          8
--#define SM_PLLCOUNT_OFFSET                      24
--#define SM_PLLCOUNT_SIZE                        6
--#define SM_PLLTEST_OFFSET                       31
--#define SM_PLLTEST_SIZE                         1
--
--/* Bitfields in PM_PLL1 */
--
--/* Bitfields in PM_VCTRL */
--#define SM_VAUTO_OFFSET                         0
--#define SM_VAUTO_SIZE                           1
--#define SM_PM_VCTRL_VAL_OFFSET                  8
--#define SM_PM_VCTRL_VAL_SIZE                    7
--
--/* Bitfields in PM_VMREF */
--#define SM_REFSEL_OFFSET                        0
--#define SM_REFSEL_SIZE                          4
--
--/* Bitfields in PM_VMV */
--#define SM_PM_VMV_VAL_OFFSET                    0
--#define SM_PM_VMV_VAL_SIZE                      8
--
--/* Bitfields in PM_IER */
--
--/* Bitfields in PM_IDR */
--
--/* Bitfields in PM_IMR */
--
--/* Bitfields in PM_ISR */
--
--/* Bitfields in PM_ICR */
--#define SM_LOCK0_OFFSET                         0
--#define SM_LOCK0_SIZE                           1
--#define SM_LOCK1_OFFSET                         1
--#define SM_LOCK1_SIZE                           1
--#define SM_WAKE_OFFSET                          2
--#define SM_WAKE_SIZE                            1
--#define SM_VOK_OFFSET                           3
--#define SM_VOK_SIZE                             1
--#define SM_VMRDY_OFFSET                         4
--#define SM_VMRDY_SIZE                           1
--#define SM_CKRDY_OFFSET                         5
--#define SM_CKRDY_SIZE                           1
--
--/* Bitfields in PM_GCCTRL */
--#define SM_OSCSEL_OFFSET                        0
--#define SM_OSCSEL_SIZE                          1
--#define SM_PLLSEL_OFFSET                        1
--#define SM_PLLSEL_SIZE                          1
--#define SM_CEN_OFFSET                           2
--#define SM_CEN_SIZE                             1
--#define SM_CPC_OFFSET                           3
--#define SM_CPC_SIZE                             1
--#define SM_DIVEN_OFFSET                         4
--#define SM_DIVEN_SIZE                           1
--#define SM_DIV_OFFSET                           8
--#define SM_DIV_SIZE                             8
--
--/* Bitfields in RTC_CTRL */
--#define SM_PCLR_OFFSET                          1
--#define SM_PCLR_SIZE                            1
--#define SM_TOPEN_OFFSET                         2
--#define SM_TOPEN_SIZE                           1
--#define SM_CLKEN_OFFSET                         3
--#define SM_CLKEN_SIZE                           1
--#define SM_PSEL_OFFSET                          8
--#define SM_PSEL_SIZE                            16
--
--/* Bitfields in RTC_VAL */
--#define SM_RTC_VAL_VAL_OFFSET                   0
--#define SM_RTC_VAL_VAL_SIZE                     31
--
--/* Bitfields in RTC_TOP */
--#define SM_RTC_TOP_VAL_OFFSET                   0
--#define SM_RTC_TOP_VAL_SIZE                     32
--
--/* Bitfields in RTC_IER */
--
--/* Bitfields in RTC_IDR */
--
--/* Bitfields in RTC_IMR */
--
--/* Bitfields in RTC_ISR */
--
--/* Bitfields in RTC_ICR */
--#define SM_TOPI_OFFSET                          0
--#define SM_TOPI_SIZE                            1
--
--/* Bitfields in WDT_CTRL */
--#define SM_KEY_OFFSET                           24
--#define SM_KEY_SIZE                             8
--
--/* Bitfields in WDT_CLR */
--
--/* Bitfields in WDT_EXT */
--
--/* Bitfields in RC_RCAUSE */
--#define SM_POR_OFFSET                           0
--#define SM_POR_SIZE                             1
--#define SM_BOD_OFFSET                           1
--#define SM_BOD_SIZE                             1
--#define SM_EXT_OFFSET                           2
--#define SM_EXT_SIZE                             1
--#define SM_WDT_OFFSET                           3
--#define SM_WDT_SIZE                             1
--#define SM_NTAE_OFFSET                          4
--#define SM_NTAE_SIZE                            1
--#define SM_SERP_OFFSET                          5
--#define SM_SERP_SIZE                            1
--
--/* Bitfields in EIM_IER */
--
--/* Bitfields in EIM_IDR */
--
--/* Bitfields in EIM_IMR */
--
--/* Bitfields in EIM_ISR */
--
--/* Bitfields in EIM_ICR */
--
--/* Bitfields in EIM_MODE */
--
--/* Bitfields in EIM_EDGE */
--#define SM_INT0_OFFSET                          0
--#define SM_INT0_SIZE                            1
--#define SM_INT1_OFFSET                          1
--#define SM_INT1_SIZE                            1
--#define SM_INT2_OFFSET                          2
--#define SM_INT2_SIZE                            1
--#define SM_INT3_OFFSET                          3
--#define SM_INT3_SIZE                            1
--
--/* Bitfields in EIM_LEVEL */
--
--/* Bitfields in EIM_TEST */
--#define SM_TESTEN_OFFSET                        31
--#define SM_TESTEN_SIZE                          1
--
--/* Bitfields in EIM_NMIC */
--#define SM_EN_OFFSET                            0
--#define SM_EN_SIZE                              1
--
--/* Bit manipulation macros */
--#define SM_BIT(name)                            (1 << SM_##name##_OFFSET)
--#define SM_BF(name,value)                       (((value) & ((1 << SM_##name##_SIZE) - 1)) << SM_##name##_OFFSET)
--#define SM_BFEXT(name,value)                    (((value) >> SM_##name##_OFFSET) & ((1 << SM_##name##_SIZE) - 1))
--#define SM_BFINS(name,value,old)                (((old) & ~(((1 << SM_##name##_SIZE) - 1) << SM_##name##_OFFSET)) | SM_BF(name,value))
--
--/* Register access macros */
--#define sm_readl(port,reg)					\
--	__raw_readl((port)->regs + SM_##reg)
--#define sm_writel(port,reg,value)				\
--	__raw_writel((value), (port)->regs + SM_##reg)
--
--#endif /* __ASM_AVR32_SM_H__ */
-diff --git a/arch/avr32/mm/dma-coherent.c b/arch/avr32/mm/dma-coherent.c
-index 099212d..26f29c6 100644
---- a/arch/avr32/mm/dma-coherent.c
-+++ b/arch/avr32/mm/dma-coherent.c
-@@ -41,6 +41,13 @@ static struct page *__dma_alloc(struct device *dev, size_t size,
- 	struct page *page, *free, *end;
- 	int order;
++	/*
+ 	 * Disable all interrupts, port and break condition.
+ 	 */
+ 	UART_PUT_CR(port, ATMEL_US_RSTSTA);
+@@ -481,6 +770,7 @@
+  */
+ static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old)
+ {
++	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+ 	unsigned long flags;
+ 	unsigned int mode, imr, quot, baud;
  
-+	/* Following is a work-around (a.k.a. hack) to prevent pages
-+	 * with __GFP_COMP being passed to split_page() which cannot
-+	 * handle them.  The real problem is that this flag probably
-+	 * should be 0 on AVR32 as it is not supported on this
-+	 * platform--see CONFIG_HUGETLB_PAGE. */
-+	gfp &= ~(__GFP_COMP);
-+
- 	size = PAGE_ALIGN(size);
- 	order = get_order(size);
+@@ -490,7 +780,7 @@
+ 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ 	quot = uart_get_divisor(port, baud);
  
-diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig
-index 53f5538..520afb8 100644
---- a/drivers/char/watchdog/Kconfig
-+++ b/drivers/char/watchdog/Kconfig
-@@ -187,6 +187,26 @@ config PNX4008_WATCHDOG
+-	if (quot > 65535) {		/* BRGR is 16-bit, so switch to slower clock */
++	if (quot > 65535) {	/* BRGR is 16-bit, so switch to slower clock */
+ 		quot /= 8;
+ 		mode |= ATMEL_US_USCLKS_MCK_DIV8;
+ 	}
+@@ -539,6 +829,9 @@
+ 	if (termios->c_iflag & (BRKINT | PARMRK))
+ 		port->read_status_mask |= ATMEL_US_RXBRK;
  
- 	  Say N if you are unsure.
- 
-+# AVR32 Architecture
++	if (atmel_port->use_dma_rx)	/* need to enable error interrupts */
++		UART_PUT_IER(port, port->read_status_mask);
 +
-+config AT32AP700X_WDT
-+	tristate "AT32AP700x watchdog"
-+	depends on WATCHDOG && CPU_AT32AP7000
-+	help
-+	  Watchdog timer embedded into AT32AP700x devices. This will reboot
-+	  your system when the timeout is reached.
+ 	/*
+ 	 * Characters to ignore
+ 	 */
+@@ -717,6 +1010,13 @@
+ 		clk_enable(atmel_port->clk);
+ 		port->uartclk = clk_get_rate(atmel_port->clk);
+ 	}
 +
-+config AT32AP700X_WDT_TIMEOUT
-+	int "Timeout value for AT32AP700x watchdog"
-+	depends on AT32AP700X_WDT
-+	default "2"
-+	range 1 2
-+	help
-+	  Sets the timeout value for the watchdog in AT32AP700x devices.
-+	  Limited by hardware to be 1 or 2 seconds.
-+
-+	  Set to 2 seconds by default.
-+
- # X86 (i386 + ia64 + x86_64) Architecture
- 
- config ACQUIRE_WDT
-diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile
-index d90f649..3907ec0 100644
---- a/drivers/char/watchdog/Makefile
-+++ b/drivers/char/watchdog/Makefile
-@@ -36,6 +36,9 @@ obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o
- obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
- obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
- 
-+# AVR32 Architecture
-+obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
-+
- # X86 (i386 + ia64 + x86_64) Architecture
- obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
- obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
-diff --git a/drivers/char/watchdog/at32ap700x_wdt.c b/drivers/char/watchdog/at32ap700x_wdt.c
-new file mode 100644
-index 0000000..9b598d9
---- /dev/null
-+++ b/drivers/char/watchdog/at32ap700x_wdt.c
-@@ -0,0 +1,325 @@
-+/*
-+ * Watchdog driver for Atmel AT32AP700X devices
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/miscdevice.h>
-+#include <linux/fs.h>
-+#include <linux/platform_device.h>
-+#include <linux/watchdog.h>
-+#include <linux/uaccess.h>
-+#include <linux/io.h>
-+
-+#define TIMEOUT_MIN		1
-+#define TIMEOUT_DEFAULT		CONFIG_AT32AP700X_WDT_TIMEOUT
-+#define TIMEOUT_MAX		2
-+
-+/* Watchdog registers and write/read macro */
-+#define	WDT_CTRL		0x00
-+#define WDT_CTRL_EN		   0
-+#define WDT_CTRL_PSEL		   8
-+#define WDT_CTRL_KEY		  24
-+
-+#define WDT_CLR			0x04
-+
-+#define WDT_BIT(name)		(1 << WDT_##name)
-+#define WDT_BF(name,value)	((value) << WDT_##name)
-+
-+#define wdt_readl(dev,reg)				\
-+	__raw_readl((dev)->regs + WDT_##reg)
-+#define wdt_writel(dev,reg,value)			\
-+	__raw_writel((value), (dev)->regs + WDT_##reg)
-+
-+struct wdt_at32ap700x {
-+	void __iomem		*regs;
-+	int			timeout;
-+	int			users;
-+	struct miscdevice	miscdev;
-+};
-+
-+static struct wdt_at32ap700x *wdt;
-+
-+/*
-+ * Disable the watchdog.
-+ */
-+static void inline at32_wdt_stop(void)
-+{
-+	unsigned long psel = wdt_readl(wdt, CTRL) & WDT_BF(CTRL_PSEL, 0x0f);
-+	wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0x55));
-+	wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0xaa));
-+}
-+
-+/*
-+ * Enable and reset the watchdog.
-+ */
-+static void inline at32_wdt_start(void)
-+{
-+	/* 0xf is 2^16 divider = 2 sec, 0xe is 2^15 divider = 1 sec */
-+	unsigned long psel = (wdt->timeout > 1) ? 0xf : 0xe;
-+
-+	wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
-+			| WDT_BF(CTRL_PSEL, psel)
-+			| WDT_BF(CTRL_KEY, 0x55));
-+	wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
-+			| WDT_BF(CTRL_PSEL, psel)
-+			| WDT_BF(CTRL_KEY, 0xaa));
-+}
-+
-+/*
-+ * Pat the watchdog timer.
-+ */
-+static void inline at32_wdt_pat(void)
-+{
-+	wdt_writel(wdt, CLR, 0x42);
-+}
-+
-+/*
-+ * Watchdog device is opened, and watchdog starts running.
-+ */
-+static int at32_wdt_open(struct inode *inode, struct file *file)
-+{
-+	if (test_and_set_bit(1, &wdt->users))
-+		return -EBUSY;
-+
-+	at32_wdt_start();
-+	return nonseekable_open(inode, file);
-+}
-+
-+/*
-+ * Close the watchdog device. If CONFIG_WATCHDOG_NOWAYOUT is _not_ defined then
-+ * the watchdog is also disabled.
-+ */
-+static int at32_wdt_close(struct inode *inode, struct file *file)
-+{
-+#ifndef CONFIG_WATCHDOG_NOWAYOUT
-+	at32_wdt_stop();
++#ifdef SUPPORT_PDC
++	atmel_port->use_dma_rx = data->use_dma_rx;
++	atmel_port->use_dma_tx = data->use_dma_tx;
++	if (atmel_port->use_dma_tx)
++		port->fifosize = PDC_BUFFER_SIZE;
 +#endif
-+	clear_bit(1, &wdt->users);
-+	return 0;
+ }
+ 
+ /*
+@@ -893,7 +1193,8 @@
+ 	struct uart_port *port = platform_get_drvdata(pdev);
+ 	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+ 
+-	if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock())
++	if (device_may_wakeup(&pdev->dev)
++			&& !clk_must_disable(atmel_port->clk))
+ 		enable_irq_wake(port->irq);
+ 	else {
+ 		uart_suspend_port(&atmel_uart, port);
+Index: linux-2.6.22.1/drivers/mtd/devices/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/mtd/devices/Kconfig	(revision 1)
++++ linux-2.6.22.1/drivers/mtd/devices/Kconfig	(arbetskopia)
+@@ -269,5 +269,11 @@
+ 	  LinuxBIOS or if you need to recover a DiskOnChip Millennium on which
+ 	  you have managed to wipe the first block.
+ 
++config MTD_AT91_DATAFLASH
++	tristate "AT91RM9200 DataFlash AT45DBxxx (legacy driver)"
++	depends on MTD && ARCH_AT91RM9200 && AT91_SPI
++	help
++	  This enables access to the DataFlash (AT45DBxxx) on the AT91RM9200.
++	  If you have such a board, say 'Y'.
++
+ endmenu
+-
+Index: linux-2.6.22.1/drivers/mtd/devices/at91_dataflash.c
+===================================================================
+--- linux-2.6.22.1/drivers/mtd/devices/at91_dataflash.c	(revision 0)
++++ linux-2.6.22.1/drivers/mtd/devices/at91_dataflash.c	(revision 0)
+@@ -0,0 +1,667 @@
++/*
++ * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder)
++ *
++ *  Copyright (C) SAN People (Pty) Ltd
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++*/
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/pci.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#include <asm/arch/spi.h>
++
++#undef DEBUG_DATAFLASH
++
++#define DATAFLASH_MAX_DEVICES	4	/* max number of dataflash devices */
++#undef	DATAFLASH_ALWAYS_ADD_DEVICE	/* always add whole device when using partitions? */
++
++#define OP_READ_CONTINUOUS	0xE8
++#define OP_READ_PAGE		0xD2
++#define OP_READ_BUFFER1		0xD4
++#define OP_READ_BUFFER2		0xD6
++#define OP_READ_STATUS		0xD7
++
++#define OP_ERASE_PAGE		0x81
++#define OP_ERASE_BLOCK		0x50
++
++#define OP_TRANSFER_BUF1	0x53
++#define OP_TRANSFER_BUF2	0x55
++#define OP_COMPARE_BUF1		0x60
++#define OP_COMPARE_BUF2		0x61
++
++#define OP_PROGRAM_VIA_BUF1	0x82
++#define OP_PROGRAM_VIA_BUF2	0x85
++
++struct dataflash_local
++{
++	int spi;			/* SPI chip-select number */
++
++	unsigned int page_size;		/* number of bytes per page */
++	unsigned short page_offset;	/* page offset in flash address */
++};
++
++
++/* Detected DataFlash devices */
++static struct mtd_info* mtd_devices[DATAFLASH_MAX_DEVICES];
++static int nr_devices = 0;
++
++/* ......................................................................... */
++
++#ifdef CONFIG_MTD_PARTITIONS
++
++static struct mtd_partition static_partitions_2M[] =
++{
++	{
++		.name		= "bootloader",
++		.offset		= 0,
++		.size		= 1 * 32 * 8 * 528,	/* 1st sector = 32 blocks * 8 pages * 528 bytes */
++		.mask_flags	= MTD_WRITEABLE,	/* read-only */
++	},
++	{
++		.name		= "kernel",
++		.offset		= MTDPART_OFS_NXTBLK,
++		.size		= 6 * 32 * 8 * 528,	/* 6 sectors */
++	},
++	{
++		.name		= "filesystem",
++		.offset		= MTDPART_OFS_NXTBLK,
++		.size		= MTDPART_SIZ_FULL,	/* rest = 9 sectors */
++	}
++};
++
++static struct mtd_partition static_partitions_4M[] =
++{
++	{
++		.name		= "bootloader",
++		.offset		= 0,
++		.size		= 1 * 64 * 8 * 528,	/* 1st sector = 64 blocks * 8 pages * 528 bytes */
++		.mask_flags	= MTD_WRITEABLE,	/* read-only */
++	},
++	{
++		.name		= "kernel",
++		.offset		= MTDPART_OFS_NXTBLK,
++		.size		= 4 * 64 * 8 * 528,	/* 4 sectors */
++	},
++	{
++		.name		= "filesystem",
++		.offset		= MTDPART_OFS_NXTBLK,
++		.size		= MTDPART_SIZ_FULL,	/* rest = 11 sectors */
++	}
++};
++
++#if defined(CONFIG_MACH_KAFA)
++static struct mtd_partition static_partitions_8M[] =
++{
++	{
++		name:		"romboot",
++		offset:		0,
++		size:		16 * 1056,	/* 160 Kb */
++		mask_flags:	MTD_WRITEABLE,		/* read-only */
++	},
++	{
++		name:		"uboot",
++		offset:		MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
++		size:		128 * 1056,		/* 1 MB */
++	},
++	{
++		name:		"kernel",
++		offset:		MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
++		size:		1024 * 1056,		/* 1 MB */
++	},
++	{
++		name:		"filesystem",
++		offset:		MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
++		size:		MTDPART_SIZ_FULL,
++	}
++};
++
++#elif defined(CONFIG_MACH_MULTMDP)
++
++static struct mtd_partition static_partitions_8M[] =
++{
++	{
++		.name		= "bootloader",
++		.offset		= 0,
++		.size		= 12 * 1056,		/* 1st sector = 32 blocks * 8 pages * 1056 bytes */
++		.mask_flags	= MTD_WRITEABLE,	/* read-only */
++	},
++	{
++		.name		= "configuration",
++		.offset		= MTDPART_OFS_NXTBLK,
++		.size		= 20 * 1056,
++	},
++	{
++		.name		= "kernel",
++		.offset		= MTDPART_OFS_NXTBLK,
++		.size		= 1520 * 1056,
++	},
++	{
++		.name		= "filesystem",
++		.offset		= MTDPART_OFS_NXTBLK,
++		.size		= MTDPART_SIZ_FULL,
++	}
++};
++
++#else
++
++static struct mtd_partition static_partitions_8M[] =
++{
++	{
++		.name		= "bootloader",
++		.offset		= 0,
++		.size		= 1 * 32 * 8 * 1056,	/* 1st sector = 32 blocks * 8 pages * 1056 bytes */
++		.mask_flags	= MTD_WRITEABLE,	/* read-only */
++	},
++	{
++		.name		= "kernel",
++		.offset		= MTDPART_OFS_NXTBLK,
++		.size		= 5 * 32 * 8 * 1056,	/* 5 sectors */
++	},
++	{
++		.name		= "filesystem",
++		.offset		= MTDPART_OFS_NXTBLK,
++		.size		= MTDPART_SIZ_FULL,	/* rest = 26 sectors */
++	}
++};
++#endif
++
++static const char *part_probes[] = { "cmdlinepart", NULL, };
++
++#endif
++
++/* ......................................................................... */
++
++/* Allocate a single SPI transfer descriptor.  We're assuming that if multiple
++   SPI transfers occur at the same time, spi_access_bus() will serialize them.
++   If this is not valid, then either (i) each dataflash 'priv' structure
++   needs it's own transfer descriptor, (ii) we lock this one, or (iii) use
++   another mechanism.   */
++static struct spi_transfer_list* spi_transfer_desc;
++
++/*
++ * Perform a SPI transfer to access the DataFlash device.
++ */
++static int do_spi_transfer(int nr, char* tx, int tx_len, char* rx, int rx_len,
++		char* txnext, int txnext_len, char* rxnext, int rxnext_len)
++{
++	struct spi_transfer_list* list = spi_transfer_desc;
++
++	list->tx[0] = tx;	list->txlen[0] = tx_len;
++	list->rx[0] = rx;	list->rxlen[0] = rx_len;
++
++	list->tx[1] = txnext;	list->txlen[1] = txnext_len;
++	list->rx[1] = rxnext;	list->rxlen[1] = rxnext_len;
++
++	list->nr_transfers = nr;
++
++	return spi_transfer(list);
++}
++
++/* ......................................................................... */
++
++/*
++ * Poll the DataFlash device until it is READY.
++ */
++static void at91_dataflash_waitready(void)
++{
++	char* command = kmalloc(2, GFP_KERNEL);
++
++	if (!command)
++		return;
++
++	do {
++		command[0] = OP_READ_STATUS;
++		command[1] = 0;
++
++		do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
++	} while ((command[1] & 0x80) == 0);
++
++	kfree(command);
 +}
 +
 +/*
-+ * Change the watchdog time interval.
++ * Return the status of the DataFlash device.
 + */
-+static int at32_wdt_settimeout(int time)
++static unsigned short at91_dataflash_status(void)
 +{
-+	/*
-+	 * All counting occurs at 1 / SLOW_CLOCK (32 kHz) and max prescaler is
-+	 * 2 ^ 16 allowing up to 2 seconds timeout.
-+	 */
-+	if ((time < TIMEOUT_MIN) || (time > TIMEOUT_MAX))
++	unsigned short status;
++	char* command = kmalloc(2, GFP_KERNEL);
++
++	if (!command)
++		return 0;
++
++	command[0] = OP_READ_STATUS;
++	command[1] = 0;
++
++	do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
++	status = command[1];
++
++	kfree(command);
++	return status;
++}
++
++/* ......................................................................... */
++
++/*
++ * Erase blocks of flash.
++ */
++static int at91_dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
++{
++	struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
++	unsigned int pageaddr;
++	char* command;
++
++#ifdef DEBUG_DATAFLASH
++	printk("dataflash_erase: addr=%i len=%i\n", instr->addr, instr->len);
++#endif
++
++	/* Sanity checks */
++	if (instr->addr + instr->len > mtd->size)
++		return -EINVAL;
++	if ((instr->len % mtd->erasesize != 0) || (instr->len % priv->page_size != 0))
++		return -EINVAL;
++	if ((instr->addr % priv->page_size) != 0)
 +		return -EINVAL;
 +
-+	/*
-+	 * Set new watchdog time. It will be used when at32_wdt_start() is
-+	 * called.
-+	 */
-+	wdt->timeout = time;
++	command = kmalloc(4, GFP_KERNEL);
++	if (!command)
++		return -ENOMEM;
++
++	while (instr->len > 0) {
++		/* Calculate flash page address */
++		pageaddr = (instr->addr / priv->page_size) << priv->page_offset;
++
++		command[0] = OP_ERASE_PAGE;
++		command[1] = (pageaddr & 0x00FF0000) >> 16;
++		command[2] = (pageaddr & 0x0000FF00) >> 8;
++		command[3] = 0;
++#ifdef DEBUG_DATAFLASH
++		printk("ERASE: (%x) %x %x %x [%i]\n", command[0], command[1], command[2], command[3], pageaddr);
++#endif
++
++		/* Send command to SPI device */
++		spi_access_bus(priv->spi);
++		do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
++
++		at91_dataflash_waitready();		/* poll status until ready */
++		spi_release_bus(priv->spi);
++
++		instr->addr += priv->page_size;		/* next page */
++		instr->len -= priv->page_size;
++	}
++
++	kfree(command);
++
++	/* Inform MTD subsystem that erase is complete */
++	instr->state = MTD_ERASE_DONE;
++	if (instr->callback)
++		instr->callback(instr);
++
 +	return 0;
 +}
 +
-+static struct watchdog_info at32_wdt_info = {
-+	.identity	= "at32ap700x watchdog",
-+	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
-+};
++/*
++ * Read from the DataFlash device.
++ *   from   : Start offset in flash device
++ *   len    : Amount to read
++ *   retlen : About of data actually read
++ *   buf    : Buffer containing the data
++ */
++static int at91_dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
++{
++	struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
++	unsigned int addr;
++	char* command;
++
++#ifdef DEBUG_DATAFLASH
++	printk("dataflash_read: %lli .. %lli\n", from, from+len);
++#endif
++
++	*retlen = 0;
++
++	/* Sanity checks */
++	if (!len)
++		return 0;
++	if (from + len > mtd->size)
++		return -EINVAL;
++
++	/* Calculate flash page/byte address */
++	addr = (((unsigned)from / priv->page_size) << priv->page_offset) + ((unsigned)from % priv->page_size);
++
++	command = kmalloc(8, GFP_KERNEL);
++	if (!command)
++		return -ENOMEM;
++
++	command[0] = OP_READ_CONTINUOUS;
++	command[1] = (addr & 0x00FF0000) >> 16;
++	command[2] = (addr & 0x0000FF00) >> 8;
++	command[3] = (addr & 0x000000FF);
++#ifdef DEBUG_DATAFLASH
++	printk("READ: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
++#endif
++
++	/* Send command to SPI device */
++	spi_access_bus(priv->spi);
++	do_spi_transfer(2, command, 8, command, 8, buf, len, buf, len);
++	spi_release_bus(priv->spi);
++
++	*retlen = len;
++	kfree(command);
++	return 0;
++}
 +
 +/*
-+ * Handle commands from user-space.
++ * Write to the DataFlash device.
++ *   to     : Start offset in flash device
++ *   len    : Amount to write
++ *   retlen : Amount of data actually written
++ *   buf    : Buffer containing the data
 + */
-+static int at32_wdt_ioctl(struct inode *inode, struct file *file,
-+		unsigned int cmd, unsigned long arg)
++static int at91_dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
 +{
-+	int ret = -ENOTTY;
-+	int time;
-+	void __user *argp = (void __user *)arg;
-+	int __user *p = argp;
++	struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
++	unsigned int pageaddr, addr, offset, writelen;
++	size_t remaining;
++	u_char *writebuf;
++	unsigned short status;
++	int res = 0;
++	char* command;
++	char* tmpbuf = NULL;
 +
-+	switch (cmd) {
-+	case WDIOC_KEEPALIVE:
-+		at32_wdt_pat();
-+		ret = 0;
-+		break;
-+	case WDIOC_GETSUPPORT:
-+		ret = copy_to_user(argp, &at32_wdt_info,
-+				sizeof(at32_wdt_info)) ? -EFAULT : 0;
-+		break;
-+	case WDIOC_SETTIMEOUT:
-+		ret = get_user(time, p);
-+		if (ret)
-+			break;
-+		ret = at32_wdt_settimeout(time);
-+		if (ret)
-+			break;
-+		/* Enable new time value */
-+		at32_wdt_start();
-+		/* fall through */
-+	case WDIOC_GETTIMEOUT:
-+		ret = put_user(wdt->timeout, p);
-+		break;
-+	case WDIOC_GETSTATUS: /* fall through */
-+	case WDIOC_GETBOOTSTATUS:
-+		ret = put_user(0, p);
-+		break;
-+	case WDIOC_SETOPTIONS:
-+		ret = get_user(time, p);
-+		if (ret)
-+			break;
-+		if (time & WDIOS_DISABLECARD)
-+			at32_wdt_stop();
-+		if (time & WDIOS_ENABLECARD)
-+			at32_wdt_start();
-+		ret = 0;
-+		break;
-+	}
++#ifdef DEBUG_DATAFLASH
++	printk("dataflash_write: %lli .. %lli\n", to, to+len);
++#endif
 +
-+	return ret;
-+}
++	*retlen = 0;
 +
-+static ssize_t at32_wdt_write(struct file *file, const char *data, size_t len,
-+				loff_t *ppos)
-+{
-+	at32_wdt_pat();
-+	return len;
-+}
++	/* Sanity checks */
++	if (!len)
++		return 0;
++	if (to + len > mtd->size)
++		return -EINVAL;
 +
-+static const struct file_operations at32_wdt_fops = {
-+	.owner		= THIS_MODULE,
-+	.llseek		= no_llseek,
-+	.ioctl		= at32_wdt_ioctl,
-+	.open		= at32_wdt_open,
-+	.release	= at32_wdt_close,
-+	.write		= at32_wdt_write,
-+};
++	command = kmalloc(4, GFP_KERNEL);
++	if (!command)
++		return -ENOMEM;
 +
-+static int __init at32_wdt_probe(struct platform_device *pdev)
-+{
-+	struct resource	*regs;
-+	int ret;
++	pageaddr = ((unsigned)to / priv->page_size);
++	offset = ((unsigned)to % priv->page_size);
++	if (offset + len > priv->page_size)
++		writelen = priv->page_size - offset;
++	else
++		writelen = len;
++	writebuf = (u_char *)buf;
++	remaining = len;
 +
-+	if (wdt) {
-+		dev_dbg(&pdev->dev, "only 1 wdt instance supported.\n");
-+		return -EBUSY;
-+	}
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs) {
-+		dev_dbg(&pdev->dev, "missing mmio resource\n");
-+		return -ENXIO;
-+	}
-+
-+	wdt = kzalloc(sizeof(struct wdt_at32ap700x), GFP_KERNEL);
-+	if (!wdt) {
-+		dev_dbg(&pdev->dev, "no memory for wdt structure\n");
++	/* Allocate temporary buffer */
++	tmpbuf = kmalloc(priv->page_size, GFP_KERNEL);
++	if (!tmpbuf) {
++		kfree(command);
 +		return -ENOMEM;
 +	}
 +
-+	wdt->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!wdt->regs) {
-+		ret = -ENOMEM;
-+		dev_dbg(&pdev->dev, "could not map I/O memory\n");
-+		goto err_free;
-+	}
-+	wdt->users = 0;
-+	wdt->miscdev.minor = WATCHDOG_MINOR;
-+	wdt->miscdev.name = "watchdog";
-+	wdt->miscdev.fops = &at32_wdt_fops;
++	/* Gain access to the SPI bus */
++	spi_access_bus(priv->spi);
 +
-+	if (at32_wdt_settimeout(TIMEOUT_DEFAULT)) {
-+		at32_wdt_settimeout(TIMEOUT_MAX);
-+		dev_dbg(&pdev->dev,
-+			"default timeout invalid, set to %d sec.\n",
-+			TIMEOUT_MAX);
-+	}
-+
-+	ret = misc_register(&wdt->miscdev);
-+	if (ret) {
-+		dev_dbg(&pdev->dev, "failed to register wdt miscdev\n");
-+		goto err_iounmap;
-+	}
-+
-+	platform_set_drvdata(pdev, wdt);
-+	wdt->miscdev.parent = &pdev->dev;
-+	dev_info(&pdev->dev, "AT32AP700X WDT at 0x%p\n", wdt->regs);
-+
-+	return 0;
-+
-+err_iounmap:
-+	iounmap(wdt->regs);
-+err_free:
-+	kfree(wdt);
-+	wdt = NULL;
-+	return ret;
-+}
-+
-+static int __exit at32_wdt_remove(struct platform_device *pdev)
-+{
-+	if (wdt && platform_get_drvdata(pdev) == wdt) {
-+		misc_deregister(&wdt->miscdev);
-+		iounmap(wdt->regs);
-+		kfree(wdt);
-+		wdt = NULL;
-+		platform_set_drvdata(pdev, NULL);
-+	}
-+
-+	return 0;
-+}
-+
-+static void at32_wdt_shutdown(struct platform_device *pdev)
-+{
-+	at32_wdt_stop();
-+}
-+
-+#ifdef CONFIG_PM
-+static int at32_wdt_suspend(struct platform_device *pdev, pm_message_t message)
-+{
-+	at32_wdt_stop();
-+	return 0;
-+}
-+
-+static int at32_wdt_resume(struct platform_device *pdev)
-+{
-+	if (wdt->users)
-+		at32_wdt_start();
-+	return 0;
-+}
-+#else
-+#define at32_wdt_suspend NULL
-+#define at32_wdt_resume NULL
++	while (remaining > 0) {
++#ifdef DEBUG_DATAFLASH
++		printk("write @ %i:%i len=%i\n", pageaddr, offset, writelen);
 +#endif
 +
-+static struct platform_driver at32_wdt_driver = {
-+	.remove		= __exit_p(at32_wdt_remove),
-+	.suspend	= at32_wdt_suspend,
-+	.resume		= at32_wdt_resume,
-+	.driver		= {
-+		.name	= "at32_wdt",
-+		.owner	= THIS_MODULE,
-+	},
-+	.shutdown	= at32_wdt_shutdown,
-+};
++		/* (1) Transfer to Buffer1 */
++		if (writelen != priv->page_size) {
++			addr = pageaddr << priv->page_offset;
++			command[0] = OP_TRANSFER_BUF1;
++			command[1] = (addr & 0x00FF0000) >> 16;
++			command[2] = (addr & 0x0000FF00) >> 8;
++			command[3] = 0;
++#ifdef DEBUG_DATAFLASH
++			printk("TRANSFER: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
++#endif
++			do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
++			at91_dataflash_waitready();
++		}
 +
-+static int __init at32_wdt_init(void)
-+{
-+	return platform_driver_probe(&at32_wdt_driver, at32_wdt_probe);
++		/* (2) Program via Buffer1 */
++		addr = (pageaddr << priv->page_offset) + offset;
++		command[0] = OP_PROGRAM_VIA_BUF1;
++		command[1] = (addr & 0x00FF0000) >> 16;
++		command[2] = (addr & 0x0000FF00) >> 8;
++		command[3] = (addr & 0x000000FF);
++#ifdef DEBUG_DATAFLASH
++		printk("PROGRAM: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
++#endif
++		do_spi_transfer(2, command, 4, command, 4, writebuf, writelen, tmpbuf, writelen);
++		at91_dataflash_waitready();
++
++		/* (3) Compare to Buffer1 */
++		addr = pageaddr << priv->page_offset;
++		command[0] = OP_COMPARE_BUF1;
++		command[1] = (addr & 0x00FF0000) >> 16;
++		command[2] = (addr & 0x0000FF00) >> 8;
++		command[3] = 0;
++#ifdef DEBUG_DATAFLASH
++		printk("COMPARE: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
++#endif
++		do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
++		at91_dataflash_waitready();
++
++		/* Get result of the compare operation */
++		status = at91_dataflash_status();
++		if ((status & 0x40) == 1) {
++			printk("at91_dataflash: Write error on page %i\n", pageaddr);
++			remaining = 0;
++			res = -EIO;
++		}
++
++		remaining = remaining - writelen;
++		pageaddr++;
++		offset = 0;
++		writebuf += writelen;
++		*retlen += writelen;
++
++		if (remaining > priv->page_size)
++			writelen = priv->page_size;
++		else
++			writelen = remaining;
++	}
++
++	/* Release SPI bus */
++	spi_release_bus(priv->spi);
++
++	kfree(tmpbuf);
++	kfree(command);
++	return res;
 +}
-+module_init(at32_wdt_init);
 +
-+static void __exit at32_wdt_exit(void)
-+{
-+	platform_driver_unregister(&at32_wdt_driver);
-+}
-+module_exit(at32_wdt_exit);
++/* ......................................................................... */
 +
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("Watchdog driver for Atmel AT32AP700X");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
-index 838dc1c..80da12d 100644
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -4,6 +4,26 @@
- 
- menu "I2C Hardware Bus support"
- 
-+config I2C_ATMELTWI
-+	tristate "Atmel TWI/I2C"
-+	depends on I2C
-+	help
-+	  Atmel on-chip TWI controller. Say Y if you have an AT32 or
-+	  AT91-based device and want to use its built-in TWI
-+	  functionality. Atmel's TWI is compatible with Philips' I2C
-+	  protocol. If in doubt, say NO
-+
-+config I2C_ATMELTWI_BAUDRATE
-+	prompt "Atmel TWI baudrate"
-+	depends on I2C_ATMELTWI
-+	int
-+	default 100000
-+	help
-+	  Set the TWI/I2C baudrate. This will alter the default value. A
-+	  different baudrate can be set by using a module parameter as well. If
-+	  no parameter is provided when loading, this is the value that will be
-+	  used.
-+
- config I2C_ALI1535
- 	tristate "ALI 1535"
- 	depends on PCI
-diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
-index 14d1432..fd7c3b3 100644
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -52,6 +52,7 @@ obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o
- obj-$(CONFIG_I2C_VOODOO3)	+= i2c-voodoo3.o
- obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
- obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
-+obj-$(CONFIG_I2C_ATMELTWI)	+= i2c-atmeltwi.o
- 
- ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
- EXTRA_CFLAGS += -DDEBUG
-diff --git a/drivers/i2c/busses/atmeltwi.h b/drivers/i2c/busses/atmeltwi.h
-new file mode 100644
-index 0000000..8502ea6
---- /dev/null
-+++ b/drivers/i2c/busses/atmeltwi.h
-@@ -0,0 +1,117 @@
 +/*
-+ * Register definitions for the Atmel Two-Wire Interface
++ * Initialize and register DataFlash device with MTD subsystem.
 + */
++static int __init add_dataflash(int channel, char *name, int IDsize,
++		int nr_pages, int pagesize, int pageoffset)
++{
++	struct mtd_info *device;
++	struct dataflash_local *priv;
++#ifdef CONFIG_MTD_PARTITIONS
++	struct mtd_partition *mtd_parts = 0;
++	int mtd_parts_nr = 0;
++#endif
 +
-+#ifndef __ASM_AVR32_TWI_H__
-+#define __ASM_AVR32_TWI_H__
++	if (nr_devices >= DATAFLASH_MAX_DEVICES) {
++		printk(KERN_ERR "at91_dataflash: Too many devices detected\n");
++		return 0;
++	}
 +
-+/* TWI register offsets */
-+#define TWI_CR					0x0000
-+#define TWI_MMR					0x0004
-+#define TWI_SMR					0x0008
-+#define TWI_IADR				0x000c
-+#define TWI_CWGR				0x0010
-+#define TWI_SR					0x0020
-+#define TWI_IER					0x0024
-+#define TWI_IDR					0x0028
-+#define TWI_IMR					0x002c
-+#define TWI_RHR					0x0030
-+#define TWI_THR					0x0034
++	device = kmalloc(sizeof(struct mtd_info) + strlen(name) + 8, GFP_KERNEL);
++	if (!device)
++		return -ENOMEM;
++	memset(device, 0, sizeof(struct mtd_info));
 +
-+/* Bitfields in CR */
-+#define TWI_START_OFFSET			0
-+#define TWI_START_SIZE				1
-+#define TWI_STOP_OFFSET				1
-+#define TWI_STOP_SIZE				1
-+#define TWI_MSEN_OFFSET				2
-+#define TWI_MSEN_SIZE				1
-+#define TWI_MSDIS_OFFSET			3
-+#define TWI_MSDIS_SIZE				1
-+#define TWI_SVEN_OFFSET				4
-+#define TWI_SVEN_SIZE				1
-+#define TWI_SVDIS_OFFSET			5
-+#define TWI_SVDIS_SIZE				1
-+#define TWI_SWRST_OFFSET			7
-+#define TWI_SWRST_SIZE				1
++	device->name = (char *)&device[1];
++	sprintf(device->name, "%s.spi%d", name, channel);
++	device->size = nr_pages * pagesize;
++	device->erasesize = pagesize;
++	device->writesize = pagesize;
++	device->owner = THIS_MODULE;
++	device->type = MTD_DATAFLASH;
++	device->flags = MTD_WRITEABLE;
++	device->erase = at91_dataflash_erase;
++	device->read = at91_dataflash_read;
++	device->write = at91_dataflash_write;
 +
-+/* Bitfields in MMR */
-+#define TWI_IADRSZ_OFFSET			8
-+#define TWI_IADRSZ_SIZE				2
-+#define TWI_MREAD_OFFSET			12
-+#define TWI_MREAD_SIZE				1
-+#define TWI_DADR_OFFSET				16
-+#define TWI_DADR_SIZE				7
++	priv = (struct dataflash_local *) kmalloc(sizeof(struct dataflash_local), GFP_KERNEL);
++	if (!priv) {
++		kfree(device);
++		return -ENOMEM;
++	}
++	memset(priv, 0, sizeof(struct dataflash_local));
 +
-+/* Bitfields in SMR */
-+#define TWI_SADR_OFFSET				16
-+#define TWI_SADR_SIZE				7
++	priv->spi = channel;
++	priv->page_size = pagesize;
++	priv->page_offset = pageoffset;
++	device->priv = priv;
 +
-+/* Bitfields in IADR */
-+#define TWI_IADR_OFFSET				0
-+#define TWI_IADR_SIZE				24
++	mtd_devices[nr_devices] = device;
++	nr_devices++;
++	printk("at91_dataflash: %s detected [spi%i] (%i bytes)\n", name, channel, device->size);
 +
-+/* Bitfields in CWGR */
-+#define TWI_CLDIV_OFFSET			0
-+#define TWI_CLDIV_SIZE				8
-+#define TWI_CHDIV_OFFSET			8
-+#define TWI_CHDIV_SIZE				8
-+#define TWI_CKDIV_OFFSET			16
-+#define TWI_CKDIV_SIZE				3
++#ifdef CONFIG_MTD_PARTITIONS
++#ifdef CONFIG_MTD_CMDLINE_PARTS
++	mtd_parts_nr = parse_mtd_partitions(device, part_probes, &mtd_parts, 0);
++#endif
++	if (mtd_parts_nr <= 0) {
++		switch (IDsize) {
++			case SZ_2M:
++				mtd_parts = static_partitions_2M;
++				mtd_parts_nr = ARRAY_SIZE(static_partitions_2M);
++				break;
++			case SZ_4M:
++				mtd_parts = static_partitions_4M;
++				mtd_parts_nr = ARRAY_SIZE(static_partitions_4M);
++				break;
++			case SZ_8M:
++				mtd_parts = static_partitions_8M;
++				mtd_parts_nr = ARRAY_SIZE(static_partitions_8M);
++				break;
++		}
++	}
 +
-+/* Bitfields in SR */
-+#define TWI_TXCOMP_OFFSET			0
-+#define TWI_TXCOMP_SIZE				1
-+#define TWI_RXRDY_OFFSET			1
-+#define TWI_RXRDY_SIZE				1
-+#define TWI_TXRDY_OFFSET			2
-+#define TWI_TXRDY_SIZE				1
-+#define TWI_SVDIR_OFFSET			3
-+#define TWI_SVDIR_SIZE				1
-+#define TWI_SVACC_OFFSET			4
-+#define TWI_SVACC_SIZE				1
-+#define TWI_GCACC_OFFSET			5
-+#define TWI_GCACC_SIZE				1
-+#define TWI_OVRE_OFFSET				6
-+#define TWI_OVRE_SIZE				1
-+#define TWI_UNRE_OFFSET				7
-+#define TWI_UNRE_SIZE				1
-+#define TWI_NACK_OFFSET				8
-+#define TWI_NACK_SIZE				1
-+#define TWI_ARBLST_OFFSET			9
-+#define TWI_ARBLST_SIZE				1
++	if (mtd_parts_nr > 0) {
++#ifdef DATAFLASH_ALWAYS_ADD_DEVICE
++		add_mtd_device(device);
++#endif
++		return add_mtd_partitions(device, mtd_parts, mtd_parts_nr);
++	}
++#endif
++	return add_mtd_device(device);		/* add whole device */
++}
 +
-+/* Bitfields in RHR */
-+#define TWI_RXDATA_OFFSET			0
-+#define TWI_RXDATA_SIZE				8
-+
-+/* Bitfields in THR */
-+#define TWI_TXDATA_OFFSET			0
-+#define TWI_TXDATA_SIZE				8
-+
-+/* Constants for IADRSZ */
-+#define TWI_IADRSZ_NO_ADDR			0
-+#define TWI_IADRSZ_ONE_BYTE			1
-+#define TWI_IADRSZ_TWO_BYTES			2
-+#define TWI_IADRSZ_THREE_BYTES			3
-+
-+/* Bit manipulation macros */
-+#define TWI_BIT(name)					\
-+	(1 << TWI_##name##_OFFSET)
-+#define TWI_BF(name,value)				\
-+	(((value) & ((1 << TWI_##name##_SIZE) - 1))	\
-+	 << TWI_##name##_OFFSET)
-+#define TWI_BFEXT(name,value)				\
-+	(((value) >> TWI_##name##_OFFSET)		\
-+	 & ((1 << TWI_##name##_SIZE) - 1))
-+#define TWI_BFINS(name,value,old)			\
-+	(((old) & ~(((1 << TWI_##name##_SIZE) - 1)	\
-+		    << TWI_##name##_OFFSET))		\
-+	 | TWI_BF(name,value))
-+
-+/* Register access macros */
-+#define twi_readl(port,reg)				\
-+	__raw_readl((port)->regs + TWI_##reg)
-+#define twi_writel(port,reg,value)			\
-+	__raw_writel((value), (port)->regs + TWI_##reg)
-+
-+#endif /* __ASM_AVR32_TWI_H__ */
-diff --git a/drivers/i2c/busses/i2c-atmeltwi.c b/drivers/i2c/busses/i2c-atmeltwi.c
-new file mode 100644
-index 0000000..9a3f223
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-atmeltwi.c
-@@ -0,0 +1,383 @@
 +/*
-+ * i2c Support for Atmel's Two-Wire Interface (TWI)
++ * Detect and initialize DataFlash device connected to specified SPI channel.
 + *
-+ * Based on the work of Copyright (C) 2004 Rick Bronson
-+ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
-+ * Ported to AVR32 and heavily modified by Espen Krangnes
-+ * <ekrangnes at atmel.com>
++ *   Device            Density         ID code                 Nr Pages        Page Size       Page offset
++ *   AT45DB011B        1Mbit   (128K)  xx0011xx (0x0c)         512             264             9
++ *   AT45DB021B        2Mbit   (256K)  xx0101xx (0x14)         1025            264             9
++ *   AT45DB041B        4Mbit   (512K)  xx0111xx (0x1c)         2048            264             9
++ *   AT45DB081B        8Mbit   (1M)    xx1001xx (0x24)         4096            264             9
++ *   AT45DB0161B       16Mbit  (2M)    xx1011xx (0x2c)         4096            528             10
++ *   AT45DB0321B       32Mbit  (4M)    xx1101xx (0x34)         8192            528             10
++ *   AT45DB0642        64Mbit  (8M)    xx1111xx (0x3c)         8192            1056            11
++ *   AT45DB1282        128Mbit (16M)   xx0100xx (0x10)         16384           1056            11
++ */
++static int __init at91_dataflash_detect(int channel)
++{
++	int res = 0;
++	unsigned short status;
++
++	spi_access_bus(channel);
++	status = at91_dataflash_status();
++	spi_release_bus(channel);
++	if (status != 0xff) {			/* no dataflash device there */
++		switch (status & 0x3c) {
++			case 0x0c:	/* 0 0 1 1 */
++				res = add_dataflash(channel, "AT45DB011B", SZ_128K, 512, 264, 9);
++				break;
++			case 0x14:	/* 0 1 0 1 */
++				res = add_dataflash(channel, "AT45DB021B", SZ_256K, 1025, 264, 9);
++				break;
++			case 0x1c:	/* 0 1 1 1 */
++				res = add_dataflash(channel, "AT45DB041B", SZ_512K, 2048, 264, 9);
++				break;
++			case 0x24:	/* 1 0 0 1 */
++				res = add_dataflash(channel, "AT45DB081B", SZ_1M, 4096, 264, 9);
++				break;
++			case 0x2c:	/* 1 0 1 1 */
++				res = add_dataflash(channel, "AT45DB161B", SZ_2M, 4096, 528, 10);
++				break;
++			case 0x34:	/* 1 1 0 1 */
++				res = add_dataflash(channel, "AT45DB321B", SZ_4M, 8192, 528, 10);
++				break;
++			case 0x3c:	/* 1 1 1 1 */
++				res = add_dataflash(channel, "AT45DB642", SZ_8M, 8192, 1056, 11);
++				break;
++// Currently unsupported since Atmel removed the "Main Memory Program via Buffer" commands.
++//			case 0x10:	/* 0 1 0 0 */
++//				res = add_dataflash(channel, "AT45DB1282", SZ_16M, 16384, 1056, 11);
++//				break;
++			default:
++				printk(KERN_ERR "at91_dataflash: Unknown device (%x)\n", status & 0x3c);
++		}
++	}
++
++	return res;
++}
++
++static int __init at91_dataflash_init(void)
++{
++	spi_transfer_desc = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
++	if (!spi_transfer_desc)
++		return -ENOMEM;
++
++	/* DataFlash (SPI chip select 0) */
++	at91_dataflash_detect(0);
++
++#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
++	/* DataFlash card (SPI chip select 3) */
++	at91_dataflash_detect(3);
++#endif
++
++	return 0;
++}
++
++static void __exit at91_dataflash_exit(void)
++{
++	int i;
++
++	for (i = 0; i < DATAFLASH_MAX_DEVICES; i++) {
++		if (mtd_devices[i]) {
++#ifdef CONFIG_MTD_PARTITIONS
++			del_mtd_partitions(mtd_devices[i]);
++#else
++			del_mtd_device(mtd_devices[i]);
++#endif
++			kfree(mtd_devices[i]->priv);
++			kfree(mtd_devices[i]);
++		}
++	}
++	nr_devices = 0;
++	kfree(spi_transfer_desc);
++}
++
++
++module_init(at91_dataflash_init);
++module_exit(at91_dataflash_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Andrew Victor");
++MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200");
+Index: linux-2.6.22.1/drivers/mtd/devices/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/mtd/devices/Makefile	(revision 1)
++++ linux-2.6.22.1/drivers/mtd/devices/Makefile	(arbetskopia)
+@@ -18,3 +18,4 @@
+ obj-$(CONFIG_MTD_DATAFLASH)	+= mtd_dataflash.o
+ obj-$(CONFIG_MTD_DATAFLASH26)	+= at91_dataflash26.o
+ obj-$(CONFIG_MTD_M25P80)	+= m25p80.o
++obj-$(CONFIG_MTD_AT91_DATAFLASH)+= at91_dataflash.o
+Index: linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0001.c
+===================================================================
+--- linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0001.c	(revision 1)
++++ linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0001.c	(arbetskopia)
+@@ -50,6 +50,7 @@
+ #define I82802AC	0x00ac
+ #define MANUFACTURER_ST         0x0020
+ #define M50LPW080       0x002F
++#define AT49BV640D	0x02de
+ 
+ static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+@@ -156,6 +157,47 @@
+ }
+ #endif
+ 
++/* Atmel chips don't use the same PRI format as Intel chips */
++static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
++{
++	struct map_info *map = mtd->priv;
++	struct cfi_private *cfi = map->fldrv_priv;
++	struct cfi_pri_intelext *extp = cfi->cmdset_priv;
++	struct cfi_pri_atmel atmel_pri;
++	uint32_t features = 0;
++
++	/* Reverse byteswapping */
++	extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport);
++	extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask);
++	extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr);
++
++	memcpy(&atmel_pri, extp, sizeof(atmel_pri));
++	memset((char *)extp + 5, 0, sizeof(*extp) - 5);
++
++	printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features);
++
++	if (atmel_pri.Features & 0x01) /* chip erase supported */
++		features |= (1<<0);
++	if (atmel_pri.Features & 0x02) /* erase suspend supported */
++		features |= (1<<1);
++	if (atmel_pri.Features & 0x04) /* program suspend supported */
++		features |= (1<<2);
++	if (atmel_pri.Features & 0x08) /* simultaneous operations supported */
++		features |= (1<<9);
++	if (atmel_pri.Features & 0x20) /* page mode read supported */
++		features |= (1<<7);
++	if (atmel_pri.Features & 0x40) /* queued erase supported */
++		features |= (1<<4);
++	if (atmel_pri.Features & 0x80) /* Protection bits supported */
++		features |= (1<<6);
++
++	extp->FeatureSupport = features;
++
++	/* burst write mode not supported */
++	cfi->cfiq->BufWriteTimeoutTyp = 0;
++	cfi->cfiq->BufWriteTimeoutMax = 0;
++}
++
+ #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
+ /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
+ static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
+@@ -233,6 +275,7 @@
+ }
+ 
+ static struct cfi_fixup cfi_fixup_table[] = {
++	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
+ 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
+ #endif
+Index: linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0002.c
+===================================================================
+--- linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0002.c	(revision 1)
++++ linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0002.c	(arbetskopia)
+@@ -185,6 +185,10 @@
+ 		extp->TopBottom = 2;
+ 	else
+ 		extp->TopBottom = 3;
++
++	/* burst write mode not supported */
++	cfi->cfiq->BufWriteTimeoutTyp = 0;
++	cfi->cfiq->BufWriteTimeoutMax = 0;
+ }
+ 
+ static void fixup_use_secsi(struct mtd_info *mtd, void *param)
+@@ -217,6 +221,7 @@
+ }
+ 
+ static struct cfi_fixup cfi_fixup_table[] = {
++	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ #ifdef AMD_BOOTLOC_BUG
+ 	{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
+ #endif
+@@ -229,7 +234,6 @@
+ #if !FORCE_WORD_WRITE
+ 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
+ #endif
+-	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ 	{ 0, 0, NULL, NULL }
+ };
+ static struct cfi_fixup jedec_fixup_table[] = {
+Index: linux-2.6.22.1/drivers/spi/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/spi/Kconfig	(revision 1)
++++ linux-2.6.22.1/drivers/spi/Kconfig	(arbetskopia)
+@@ -55,6 +55,7 @@
+ config SPI_ATMEL
+ 	tristate "Atmel SPI Controller"
+ 	depends on (ARCH_AT91 || AVR32) && SPI_MASTER
++	select SPI_AT91_MANUAL_CS if ARCH_AT91RM9200
+ 	help
+ 	  This selects a driver for the Atmel SPI Controller, present on
+ 	  many AT32 (AVR32) and AT91 (ARM) chips.
+@@ -100,6 +101,24 @@
+ 	  inexpensive battery powered microcontroller evaluation board.
+ 	  This same cable can be used to flash new firmware.
+ 
++config SPI_AT91
++	tristate "AT91RM9200 Bitbang SPI Master"
++	depends on SPI_MASTER && ARCH_AT91RM9200 && !SPI_ATMEL && EXPERIMENTAL
++	select SPI_BITBANG
++	select SPI_AT91_MANUAL_CS
++	help
++	  This is dumb PIO bitbanging driver for the Atmel AT91RM9200.
++	  The SPI_ATMEL driver will be its replacement, using the native
++	  SPI hardware and its DMA controller.
++
++config SPI_AT91_MANUAL_CS
++	bool
++	depends on ARCH_AT91RM9200
++	help
++	  Works around an AT91RM9200 problem whereby the SPI chip-select
++	  will be wrongly disabled.  The workaround uses those pins as
++	  GPIOs instead of letting the SPI controller manage them.
++
+ config SPI_IMX
+ 	tristate "Freescale iMX SPI controller"
+ 	depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
+Index: linux-2.6.22.1/drivers/spi/atmel_spi.c
+===================================================================
+--- linux-2.6.22.1/drivers/spi/atmel_spi.c	(revision 1)
++++ linux-2.6.22.1/drivers/spi/atmel_spi.c	(arbetskopia)
+@@ -412,8 +412,8 @@
+ 		csr |= SPI_BIT(NCPHA);
+ 
+ 	/* TODO: DLYBS and DLYBCT */
+-	csr |= SPI_BF(DLYBS, 10);
+-	csr |= SPI_BF(DLYBCT, 10);
++	csr |= SPI_BF(DLYBS, 0);
++	csr |= SPI_BF(DLYBCT, 0);
+ 
+ 	/* chipselect must have been muxed as GPIO (e.g. in board setup) */
+ 	npcs_pin = (unsigned int)spi->controller_data;
+Index: linux-2.6.22.1/drivers/spi/spi_at91_bitbang.c
+===================================================================
+--- linux-2.6.22.1/drivers/spi/spi_at91_bitbang.c	(revision 0)
++++ linux-2.6.22.1/drivers/spi/spi_at91_bitbang.c	(revision 0)
+@@ -0,0 +1,207 @@
++/*
++ * at91_spi.c - at91 SPI driver (BOOTSTRAP/BITBANG VERSION)
 + *
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * Borrowed heavily from the original work by:
-+ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
-+ *
-+ * Partialy rewriten by Karel Hojdar <cmkaho at seznam.cz>
-+ * bugs removed, interrupt routine markedly rewritten
++ * Copyright (C) 2006 David Brownell
 + *
 + * This program is free software; you can redistribute it and/or modify
 + * it under the terms of the GNU General Public License as published by
 + * the Free Software Foundation; either version 2 of the License, or
 + * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 + */
-+
-+
-+#include <linux/err.h>
-+#include <linux/module.h>
 +#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+#include <linux/i2c.h>
 +#include <linux/init.h>
-+#include <linux/clk.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
 +#include <linux/platform_device.h>
-+#include <linux/completion.h>
-+#include <asm/io.h>
-+#include <linux/time.h>
-+#include "atmeltwi.h"
 +
-+static unsigned int baudrate = CONFIG_I2C_ATMELTWI_BAUDRATE;
-+module_param(baudrate, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP);
-+MODULE_PARM_DESC(baudrate, "The TWI baudrate");
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
 +
++#include <asm/arch/gpio.h>
 +
-+struct atmel_twi {
-+	void __iomem *regs;
-+	struct i2c_adapter adapter;
-+	struct clk *pclk;
-+	spinlock_t lock;
-+	struct completion comp;
-+	u32 intmask;
-+	u8 *buf;
-+	u8 len;
-+	u8 acks_left;
-+	u8 nack;
-+	unsigned int irq;
-+
-+};
-+#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
 +
 +/*
-+ * Initialize the TWI hardware registers.
++ * FIXME this bitbanging version is just to help bootstrap systems until
++ * there's a native SPI+IRQ+DMA controller driver ... such a driver should
++ * be a drop-in replacement for this one, and much faster.
++ *
++ * remember:
++ *
++ *	- other at91 parts (like at91sam9) have multiple controllers
++ *	  and different pin muxing; this version is at91rm9200 specfic.
++ *
++ *	- at91sam9261 SPI0 pins are directly muxed with MMC/SD pins.
++ *
++ *	- rm9200 spi chipselects drop wrongly, so the native driver
++ *	  will need to use gpios much like this does.
++ *
++ *	- real hardware only allows 8..16 bits per word, while this
++ *	  bitbanger allows 1..32 (incompatible superset).
++ *
++ *	- this disregards clock parameters.  with inlined gpio calls,
++ *	  gcc 3.4.4 produces about 1.5 mbit/sec, more than 2x faster
++ *	  than using the subroutined veresion from txrx_word().
++ *
++ *	- suspend/resume and <linux/clk.h> support is missing ...
 + */
-+static int __devinit twi_hwinit(struct atmel_twi *twi)
++
++#define	spi_miso_bit	AT91_PIN_PA0
++#define	spi_mosi_bit	AT91_PIN_PA1
++#define	spi_sck_bit	AT91_PIN_PA2
++
++struct at91_spi {
++	struct spi_bitbang	bitbang;
++	struct platform_device	*pdev;
++};
++
++/*----------------------------------------------------------------------*/
++
++static inline void setsck(struct spi_device *spi, int is_on)
 +{
-+	unsigned long cdiv, ckdiv=0;
++	at91_set_gpio_value(spi_sck_bit, is_on);
++}
 +
-+	twi_writel(twi, IDR, ~0UL);
-+	twi_writel(twi, CR, TWI_BIT(SWRST));	/*Reset peripheral*/
-+	twi_readl(twi, SR);
++static inline void setmosi(struct spi_device *spi, int is_on)
++{
++	at91_set_gpio_value(spi_mosi_bit, is_on);
++}
 +
-+	cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
++static inline int getmiso(struct spi_device *spi)
++{
++	return at91_get_gpio_value(spi_miso_bit);
++}
 +
-+	while (cdiv > 255) {
-+		ckdiv++;
-+		cdiv = cdiv >> 1;
-+	}
++static void at91_spi_chipselect(struct spi_device *spi, int is_active)
++{
++	unsigned long cs = (unsigned long) spi->controller_data;
 +
-+	if (ckdiv > 7)
++	/* set default clock polarity */
++	if (is_active)
++		setsck(spi, spi->mode & SPI_CPOL);
++
++	/* only support active-low (default) */
++	at91_set_gpio_value(cs, !is_active);
++}
++
++/*
++ * NOTE:  this is "as fast as we can"; it should be a function of
++ * the device clock ...
++ */
++#define	spidelay(X)	do{} while(0)
++
++#define	EXPAND_BITBANG_TXRX
++#include <linux/spi/spi_bitbang.h>
++
++static u32 at91_spi_txrx_word_mode0(struct spi_device *spi,
++		unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, 8);
++}
++
++static u32 at91_spi_txrx_word_mode1(struct spi_device *spi,
++		unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, 8);
++}
++
++static u32 at91_spi_txrx_word_mode2(struct spi_device *spi,
++		unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, 8);
++}
++
++static u32 at91_spi_txrx_word_mode3(struct spi_device *spi,
++		unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, 8);
++}
++
++/*----------------------------------------------------------------------*/
++
++static int __init at91_spi_probe(struct platform_device *pdev)
++{
++	int			status;
++	struct spi_master	*master;
++	struct at91_spi		*at91_spi;
++
++	if (pdev->id != 0)	/* SPI0 bus */
 +		return -EINVAL;
-+	else
-+		twi_writel(twi, CWGR, (TWI_BF(CKDIV, ckdiv)
-+			       | TWI_BF(CHDIV, cdiv)
-+			       | TWI_BF(CLDIV, cdiv)));
-+	return 0;
++
++	master = spi_alloc_master(&pdev->dev, sizeof *at91_spi);
++	if (!master)
++		return -ENOMEM;
++
++	at91_spi = spi_master_get_devdata(master);
++	at91_spi->pdev = pdev;
++	platform_set_drvdata(pdev, at91_spi);
++
++	/* SPI and bitbang hookup */
++	master->bus_num = 0;
++	master->num_chipselect = 4;
++
++	at91_spi->bitbang.master = spi_master_get(master);
++	at91_spi->bitbang.chipselect = at91_spi_chipselect;
++	at91_spi->bitbang.txrx_word[SPI_MODE_0] = at91_spi_txrx_word_mode0;
++	at91_spi->bitbang.txrx_word[SPI_MODE_1] = at91_spi_txrx_word_mode1;
++	at91_spi->bitbang.txrx_word[SPI_MODE_2] = at91_spi_txrx_word_mode2;
++	at91_spi->bitbang.txrx_word[SPI_MODE_3] = at91_spi_txrx_word_mode3;
++
++	status = spi_bitbang_start(&at91_spi->bitbang);
++	if (status < 0)
++		(void) spi_master_put(at91_spi->bitbang.master);
++
++	return status;
 +}
 +
-+/*
-+ * Waits for the i2c status register to set the specified bitmask
-+ * Returns 0 if timed out (~100ms).
-+ */
-+static short twi_complete(struct atmel_twi *twi, u32 mask)
++static int __exit at91_spi_remove(struct platform_device *pdev)
 +{
-+	int timeout = msecs_to_jiffies(100);
++	struct at91_spi	*at91_spi = platform_get_drvdata(pdev);
++	int status;
 +
-+	twi->intmask = mask;
-+	init_completion(&twi->comp);
-+
-+	twi_writel(twi, IER, mask);
-+
-+	if (!wait_for_completion_timeout(&twi->comp, timeout)) {
-+		/* RESET TWI interface */
-+		twi_writel(twi, CR, TWI_BIT(SWRST));
-+
-+		/* Reinitialize TWI */
-+		twi_hwinit(twi);
-+
-+		return -ETIMEDOUT;
-+	}
-+	return 0;
-+}
-+
-+/*
-+ * Generic i2c master transfer entrypoint.
-+ */
-+static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
-+{
-+	struct atmel_twi *twi = to_atmel_twi(adap);
-+	struct i2c_msg *pmsg;
-+	int i;
-+
-+	/* get first message */
-+	pmsg = msgs;
-+
-+	dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
-+
-+	twi->nack = 0;
-+	for (i = 0; i < num; i++, pmsg++) {
-+		twi->len = pmsg->len;
-+		twi->buf = pmsg->buf;
-+		twi->acks_left = pmsg->len;
-+		twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
-+			(pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
-+		twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
-+
-+		dev_dbg(&adap->dev,"#%d: internal addr %d %s byte%s %s 0x%02x\n",
-+			i,pmsg->len, pmsg->flags & I2C_M_RD ? "reading" : "writing",
-+			pmsg->len > 1 ? "s" : "",
-+			pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
-+
-+		/* enable */
-+		twi_writel(twi, CR, TWI_BIT(MSEN));
-+
-+		if (pmsg->flags & I2C_M_RD) {
-+			if (twi->len == 1)
-+				twi_writel(twi, CR,
-+					TWI_BIT(START) | TWI_BIT(STOP));
-+			else
-+				twi_writel(twi, CR, TWI_BIT(START));
-+
-+			if (twi_complete(twi, TWI_BIT(RXRDY)) == -ETIMEDOUT) {
-+				dev_dbg(&adap->dev, "RXRDY timeout. Stopped with %d bytes left\n",
-+					twi->acks_left);
-+				return -ETIMEDOUT;
-+			}
-+		} else {
-+			twi_writel(twi, THR, twi->buf[0]);
-+			if (twi_complete(twi, TWI_BIT(TXRDY)) == -ETIMEDOUT) {
-+				dev_dbg(&adap->dev, "TXRDY timeout. Stopped with %d bytes left\n",
-+				twi->acks_left);
-+				return -ETIMEDOUT;
-+			}
-+
-+			if (twi->nack)
-+			    return -ENODEV;
-+		}
-+
-+		/* Disable TWI interface */
-+		twi_writel(twi, CR, TWI_BIT(MSDIS));
-+
-+	} /* end cur msg */
-+
-+	return i;
-+}
-+
-+
-+static irqreturn_t twi_interrupt(int irq, void *dev_id)
-+{
-+	struct atmel_twi *twi = dev_id;
-+	int status = twi_readl(twi, SR);
-+
-+	/* Save state for later debug prints */
-+	int old_mask = twi->intmask;
-+	int old_status = status;
-+
-+	if (twi->intmask & status) {
-+		if (status & TWI_BIT(NACK))
-+			goto nack;
-+
-+		status &= twi->intmask;
-+
-+		if (status & TWI_BIT(TXCOMP))
-+		    goto complete;
-+
-+		else if (status & TWI_BIT(RXRDY)) {
-+			if ( twi->acks_left > 0 ) {
-+			    twi->buf[twi->len - twi->acks_left] =
-+				twi_readl(twi, RHR);
-+			    twi->acks_left--;
-+			}
-+			if ( twi->acks_left == 1 )
-+				twi_writel(twi, CR, TWI_BIT(STOP));
-+
-+			if (twi->acks_left == 0 ) {
-+				twi->intmask = TWI_BIT(TXCOMP);
-+				twi_writel(twi, IER, TWI_BIT(TXCOMP));
-+			}
-+		} else if (status & TWI_BIT(TXRDY)) {
-+			twi->acks_left--;
-+			if ( twi->acks_left == 0 ) {
-+				twi->intmask = TWI_BIT(TXCOMP);
-+				twi_writel(twi, IER, TWI_BIT(TXCOMP));
-+			} else if (twi->acks_left > 0)
-+				twi_writel(twi, THR, twi->buf[twi->len - twi->acks_left]);
-+		}
-+	}
-+
-+	dev_dbg(&twi->adapter.dev,
-+		"TWI ISR, SR 0x%08X, intmask 0x%08X, acks_left %i.\n",
-+		old_status, old_mask, twi->acks_left);
-+
-+	return IRQ_HANDLED;
-+
-+nack:
-+	dev_dbg(&twi->adapter.dev, "NACK received!\n");
-+	twi->nack = 1;
-+
-+complete:
-+	twi_writel(twi, IDR, ~0UL);
-+	complete(&twi->comp);
-+
-+	dev_dbg(&twi->adapter.dev,
-+		"TWI ISR, SR 0x%08X, intmask 0x%08X, \
-+		acks_left %i - completed.\n",
-+		old_status, old_mask, twi->acks_left);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+
-+/*
-+ * Return list of supported functionality.
-+ */
-+static u32 twi_func(struct i2c_adapter *adapter)
-+{
-+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+/* For now, we only handle combined mode (smbus) */
-+static struct i2c_algorithm twi_algorithm = {
-+	.master_xfer	= twi_xfer,
-+	.functionality	= twi_func,
-+};
-+
-+/*
-+ * Main initialization routine.
-+ */
-+static int __devinit twi_probe(struct platform_device *pdev)
-+{
-+	struct atmel_twi *twi;
-+	struct resource *regs;
-+	struct clk *pclk;
-+	struct i2c_adapter *adapter;
-+	int rc, irq;
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs)
-+		return -ENXIO;
-+
-+	pclk = clk_get(&pdev->dev, "pclk");
-+	if (IS_ERR(pclk))
-+		return PTR_ERR(pclk);
-+	clk_enable(pclk);
-+
-+	rc = -ENOMEM;
-+	twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
-+	if (!twi) {
-+		dev_err(&pdev->dev, "can't allocate interface!\n");
-+		goto err_alloc_twi;
-+	}
-+
-+	twi->pclk = pclk;
-+	twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!twi->regs)
-+		goto err_ioremap;
-+
-+	irq = platform_get_irq(pdev,0);
-+	rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
-+	if (rc) {
-+		dev_err(&pdev->dev, "can't bind irq!\n");
-+		goto err_irq;
-+	}
-+	twi->irq = irq;
-+
-+	rc = twi_hwinit(twi);
-+	if (rc) {
-+		dev_err(&pdev->dev, "Unable to set baudrate\n");
-+		goto err_hw_init;
-+	}
-+
-+	adapter = &twi->adapter;
-+	sprintf(adapter->name, "TWI");
-+	adapter->algo = &twi_algorithm;
-+	adapter->class = I2C_CLASS_HWMON;
-+	adapter->dev.parent = &pdev->dev;
-+
-+	platform_set_drvdata(pdev, twi);
-+
-+	rc = i2c_add_adapter(adapter);
-+	if (rc) {
-+		dev_err(&pdev->dev, "Adapter %s registration failed\n",
-+			adapter->name);
-+		goto err_register;
-+	}
-+
-+	dev_info(&pdev->dev, "Atmel TWI i2c bus device (baudrate %dk) at 0x%08lx.\n",
-+		 baudrate/1000, (unsigned long)regs->start);
-+
-+	return 0;
-+
-+
-+err_register:
-+	platform_set_drvdata(pdev, NULL);
-+
-+err_hw_init:
-+	free_irq(irq, twi);
-+
-+err_irq:
-+	iounmap(twi->regs);
-+
-+err_ioremap:
-+	kfree(twi);
-+
-+err_alloc_twi:
-+	clk_disable(pclk);
-+	clk_put(pclk);
-+
-+	return rc;
-+}
-+
-+static int __devexit twi_remove(struct platform_device *pdev)
-+{
-+	struct atmel_twi *twi = platform_get_drvdata(pdev);
-+	int res;
++	/* stop() unregisters child devices too */
++	status = spi_bitbang_stop(&at91_spi->bitbang);
++	(void) spi_master_put(at91_spi->bitbang.master);
 +
 +	platform_set_drvdata(pdev, NULL);
-+	res = i2c_del_adapter(&twi->adapter);
-+	twi_writel(twi, CR, TWI_BIT(MSDIS));
-+	iounmap(twi->regs);
-+	clk_disable(twi->pclk);
-+	clk_put(twi->pclk);
-+	free_irq(twi->irq, twi);
-+	kfree(twi);
-+
-+	return res;
++	return status;
 +}
 +
-+static struct platform_driver twi_driver = {
-+	.probe		= twi_probe,
-+	.remove		= __devexit_p(twi_remove),
++static struct platform_driver at91_spi_driver = {
++	.probe		= at91_spi_probe,
++	.remove		= __exit_p(at91_spi_remove),
 +	.driver		= {
-+		.name	= "atmel_twi",
++		.name	= "at91_spi",
 +		.owner	= THIS_MODULE,
 +	},
 +};
 +
-+static int __init atmel_twi_init(void)
++static int __init at91_spi_init(void)
 +{
-+	return platform_driver_register(&twi_driver);
++	at91_set_gpio_output(spi_sck_bit, 0);
++	at91_set_gpio_output(spi_mosi_bit, 0);
++	at91_set_gpio_input(spi_miso_bit, 1 /* pullup */);
++
++	/* register driver */
++	return platform_driver_register(&at91_spi_driver);
 +}
 +
-+static void __exit atmel_twi_exit(void)
++static void __exit at91_spi_exit(void)
 +{
-+	platform_driver_unregister(&twi_driver);
++	platform_driver_unregister(&at91_spi_driver);
 +}
 +
-+module_init(atmel_twi_init);
-+module_exit(atmel_twi_exit);
++device_initcall(at91_spi_init);
++module_exit(at91_spi_exit);
 +
-+MODULE_AUTHOR("Espen Krangnes");
-+MODULE_DESCRIPTION("I2C driver for Atmel TWI");
++MODULE_ALIAS("at91_spi.0");
++
++MODULE_DESCRIPTION("AT91 SPI support (BOOTSTRAP/BITBANG VERSION)");
++MODULE_AUTHOR("David Brownell");
 +MODULE_LICENSE("GPL");
-diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
-index 50e06e8..7bbea09 100644
---- a/drivers/input/mouse/Kconfig
-+++ b/drivers/input/mouse/Kconfig
-@@ -216,4 +216,20 @@ config MOUSE_HIL
+Index: linux-2.6.22.1/drivers/spi/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/spi/Makefile	(revision 1)
++++ linux-2.6.22.1/drivers/spi/Makefile	(arbetskopia)
+@@ -23,6 +23,7 @@
+ obj-$(CONFIG_SPI_MPC83xx)		+= spi_mpc83xx.o
+ obj-$(CONFIG_SPI_S3C24XX_GPIO)		+= spi_s3c24xx_gpio.o
+ obj-$(CONFIG_SPI_S3C24XX)		+= spi_s3c24xx.o
++obj-$(CONFIG_SPI_AT91)			+= spi_at91_bitbang.o
+ # 	... add above this line ...
+ 
+ # SPI protocol drivers (device/link on bus)
+Index: linux-2.6.22.1/drivers/input/mouse/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/input/mouse/Kconfig	(revision 1)
++++ linux-2.6.22.1/drivers/input/mouse/Kconfig	(arbetskopia)
+@@ -216,4 +216,20 @@
  	help
  	  Say Y here to support HIL pointers.
  
@@ -5676,23 +14921,10 @@ index 50e06e8..7bbea09 100644
 +	  module will be called gpio_mouse.
 +
  endif
-diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
-index aa4ba87..9e6e363 100644
---- a/drivers/input/mouse/Makefile
-+++ b/drivers/input/mouse/Makefile
-@@ -15,6 +15,7 @@ obj-$(CONFIG_MOUSE_PS2)		+= psmouse.o
- obj-$(CONFIG_MOUSE_SERIAL)	+= sermouse.o
- obj-$(CONFIG_MOUSE_HIL)		+= hil_ptr.o
- obj-$(CONFIG_MOUSE_VSXXXAA)	+= vsxxxaa.o
-+obj-$(CONFIG_MOUSE_GPIO)	+= gpio_mouse.o
- 
- psmouse-objs := psmouse-base.o synaptics.o
- 
-diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
-new file mode 100644
-index 0000000..0936d6b
---- /dev/null
-+++ b/drivers/input/mouse/gpio_mouse.c
+Index: linux-2.6.22.1/drivers/input/mouse/gpio_mouse.c
+===================================================================
+--- linux-2.6.22.1/drivers/input/mouse/gpio_mouse.c	(revision 0)
++++ linux-2.6.22.1/drivers/input/mouse/gpio_mouse.c	(revision 0)
 @@ -0,0 +1,196 @@
 +/*
 + * Driver for simulating a mouse on GPIO lines.
@@ -5890,456 +15122,1613 @@ index 0000000..0936d6b
 +MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
 +MODULE_DESCRIPTION("GPIO mouse driver");
 +MODULE_LICENSE("GPL");
-diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
-index 87d2046..9ce3ca1 100644
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -95,6 +95,14 @@ config LEDS_COBALT
- 	help
- 	  This option enables support for the front LED on Cobalt Server
+Index: linux-2.6.22.1/drivers/input/mouse/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/input/mouse/Makefile	(revision 1)
++++ linux-2.6.22.1/drivers/input/mouse/Makefile	(arbetskopia)
+@@ -15,6 +15,7 @@
+ obj-$(CONFIG_MOUSE_SERIAL)	+= sermouse.o
+ obj-$(CONFIG_MOUSE_HIL)		+= hil_ptr.o
+ obj-$(CONFIG_MOUSE_VSXXXAA)	+= vsxxxaa.o
++obj-$(CONFIG_MOUSE_GPIO)	+= gpio_mouse.o
  
-+config LEDS_GPIO
-+	tristate "LED Support for GPIO connected LEDs"
-+	depends on LEDS_CLASS && GENERIC_GPIO
-+	help
-+	  This option enables support for the LEDs connected to GPIO
-+	  outputs. To be useful the particular board must have LEDs
-+	  and they must be connected to the GPIO lines.
-+
- comment "LED Triggers"
+ psmouse-objs := psmouse-base.o synaptics.o
  
- config LEDS_TRIGGERS
-diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
-index aa2c18e..f8995c9 100644
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_LEDS_NET48XX)		+= leds-net48xx.o
- obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
- obj-$(CONFIG_LEDS_H1940)		+= leds-h1940.o
- obj-$(CONFIG_LEDS_COBALT)		+= leds-cobalt.o
-+obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
- 
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
-diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
-new file mode 100644
-index 0000000..47d90db
---- /dev/null
-+++ b/drivers/leds/leds-gpio.c
-@@ -0,0 +1,199 @@
+Index: linux-2.6.22.1/drivers/video/s1d15605fb.c
+===================================================================
+--- linux-2.6.22.1/drivers/video/s1d15605fb.c	(revision 0)
++++ linux-2.6.22.1/drivers/video/s1d15605fb.c	(revision 0)
+@@ -0,0 +1,659 @@
 +/*
-+ * LEDs driver for GPIOs
++ *  drivers/video/s1d15605.c
 + *
-+ * Copyright (C) 2007 8D Technologies inc.
-+ * Raphael Assenat <raph@8d.com>
++ * Adapted from several sources including:
++ * 1) Driver for AT91 LCD Controller
++ *    Copyright (C) 2006 Atmel
++ *
++ * 2) Copyright (C) 2005 S. Kevin Hester
++ *
++ *   This file is subject to the terms and conditions of the GNU General Public
++ *   License. See the file COPYING in the main directory of this archive for
++ *   more details.
++ *
++ *   This is a basic framebuffer driver for the Optrex F-51320 128x64 mono LCD
++ *   display.  This display uses a clone of the common Epson SED 1531 display
++ *   controller.
++ *
++ *   I've heavily borrowed code from the vfb.c driver.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#ifdef DEBUG
++#define MSG(string, args...) printk("s1d15605fb:" string, ##args)
++#else
++#define MSG(string, args...)
++#endif
++
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/dma-mapping.h>
++#include <linux/interrupt.h>
++#include <linux/clk.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++
++#include <asm/uaccess.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++
++#ifdef CONFIG_PMAC_BACKLIGHT
++#include <asm/backlight.h>
++#endif
++
++#define VIDEOWIDTH		128
++#define VIDEOHEIGHT		64
++#define VIDEODEPTH		1	/* bits/pixel */
++#define VIDEOWIDTH_BYTES	((VIDEOWIDTH * VIDEODEPTH) / 8)
++
++/* The number of bytes that actually go to the device */
++#define ACTUALVIDEOMEMSIZE	(VIDEOWIDTH_BYTES * VIDEOHEIGHT)
++#define VIDEOMEMSIZE		PAGE_SIZE
++
++static struct fb_var_screeninfo s1d15605_default __initdata = {
++	.xres		= VIDEOWIDTH,
++	.yres		= VIDEOHEIGHT,
++	.xres_virtual	= VIDEOWIDTH,
++	.yres_virtual	= VIDEOHEIGHT,
++	.bits_per_pixel	= VIDEODEPTH,
++	.red		= { 0, 1, 0 },
++	.green		= { 0, 1, 0 },
++	.blue		= { 0, 1, 0 },
++	.activate	= FB_ACTIVATE_NOW,
++	.pixclock	= 20000,
++	.vmode		= FB_VMODE_NONINTERLACED,
++};
++
++static struct fb_fix_screeninfo s1d15605_fix __initdata = {
++	.id		= "s1d15605",
++	.type		= FB_TYPE_PACKED_PIXELS,
++	.visual		= FB_VISUAL_MONO10,
++	.xpanstep	= 0,
++	.ypanstep	= 0,
++	.ywrapstep	= 0,
++	.accel		= FB_ACCEL_NONE,
++};
++
++struct s1d15605fb_info {
++	struct fb_info		*info;
++	char			*mmio;
++	unsigned long		reset_pin;
++	struct platform_device	*pdev;
++};
++
++/*
++ * LCD device interface
++ */
++#define	RESET_DISPLAY		0xE2
++#define	LCD_BIAS_1_9		0xA2
++#define	ADC_SELECT_REVERSE	0xA1
++#define	COMMON_OUTPUT_NORMAL	0xC0
++#define	V5_RESISTOR_RATIO	0x26
++#define	ELECTRONIC_VOLUME_SET	0x81
++#define	ELECTRONIC_VOLUME_INIT	0x20
++#define	POWER_CONTROL_SET	0x28
++#define	VOLTAGE_REGULATOR	0x02
++#define	VOLTAGE_FOLLOWER	0x01
++#define	BOOSTER_CIRCUIT		0x04
++#define	DISPLAY_ON		0xAF
++#define	START_LINE_SET		0x40
++#define	PAGE_ADDRESS_SET	0xB0
++#define	COLUMN_ADDRESS_HIGH	0x10
++#define	COLUMN_ADDRESS_LOW	0x00
++#define	RESISTOR_RATIO_START	0x20
++
++#define	NUM_OF_PAGES		8
++#define	NUM_OF_COLUMNS		128
++
++#define	WRITE_COMMAND(x)	__raw_writeb((x), (sinfo)->mmio)
++#define	READ_COMMAND		__raw_readb((sinfo)->mmio)
++#define	WRITE_DATA(x)		__raw_writeb((x), (sinfo)->mmio + (0x10000))
++#define	READ_DATA		__raw_readb((sinfo)->mmio + (0x10000))
++
++
++/*
++ *	s1d15605fb_resize_framebuffer
++ *
++ *	Free allocated space if different.  Allocate on new of changed.
++ *	Returns -ENOMEM if the new framebuffer can not be allocated,
++ *	zero on success.
++ */
++static int s1d15605fb_resize_framebuffer(struct s1d15605fb_info *sinfo)
++{
++	struct fb_info			*info = sinfo->info;
++	struct fb_fix_screeninfo	*fix = &info->fix;
++	struct fb_var_screeninfo	*var = &info->var;
++	unsigned int			new_size;
++	void				*new_vaddr;
++
++	new_size = ((var->xres_virtual * var->yres_virtual * var->bits_per_pixel) / 8);
++
++	MSG("%s: x (%d) y (%d) bpp (%d): new size 0x%08x\n", __FUNCTION__,
++		var->xres_virtual, var->yres_virtual, var->bits_per_pixel, new_size);
++
++	if (new_size == fix->smem_len)
++		return 0;
++
++	if (fix->smem_len) {
++		kfree(info->screen_base);
++	}
++
++	new_vaddr = kmalloc(new_size, GFP_KERNEL);
++
++	if (!new_vaddr) {
++		fix->smem_len = 0;
++		return -ENOMEM;
++	}
++
++	info->screen_base = new_vaddr;
++	fix->smem_start = (unsigned)new_vaddr;
++	fix->smem_len = new_size;
++	fix->line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
++
++	dev_info(info->device,
++		"%luKiB frame buffer at %08lx (mapped at %p)\n",
++		(unsigned long)info->fix.smem_len / 1024,
++		(unsigned long)info->fix.smem_start,
++		info->screen_base);
++
++	return 0;
++}
++
++
++/*
++ * The s1d15605 seems to be divided into eight 128 pixel wide pages (from top to
++ * bottom) each page seems to be eight pixels high, where these eight pixels are
++ * one byte
++ */
++static void s1d15605_update(struct fb_info *info)
++{
++	struct s1d15605fb_info	*sinfo = info->par;
++	int			page, i, row, colmask;
++	u8			retVal, *rowPtr;
++
++	WRITE_COMMAND(START_LINE_SET);
++	for (page = 0; page < NUM_OF_PAGES; ++page) {
++		WRITE_COMMAND(PAGE_ADDRESS_SET + page);
++		WRITE_COMMAND(COLUMN_ADDRESS_HIGH);
++		WRITE_COMMAND(COLUMN_ADDRESS_LOW);
++
++		for (i = 0; i < NUM_OF_COLUMNS; ++i)
++		{
++			/* point of opportunity: optimization */
++			colmask = (1 << (i & 0x7));
++			rowPtr = (u8*)(info->screen_base);
++			rowPtr += (VIDEOWIDTH_BYTES * 8 * page);
++			rowPtr += (i >> 3);
++			retVal = 0;
++			for (row = 0; row < 8; ++row)
++			{
++				retVal = (retVal >> 1) | (((*rowPtr) & colmask) ? 0x80 : 0);
++				rowPtr += VIDEOWIDTH_BYTES;
++			}
++			WRITE_DATA(retVal);
++		}
++	}
++
++	WRITE_COMMAND(DISPLAY_ON);
++}
++
++
++/*
++ * Setting the video mode has been split into two parts.
++ * First part, xxxfb_check_var, must not write anything
++ * to hardware, it should only verify and adjust var.
++ * This means it doesn't alter par but it does use hardware
++ * data from it to check this var.
++ */
++static int s1d15605_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
++{
++	/*
++	 * Some very basic checks
++	 */
++	if (!var->xres)
++		var->xres = 1;
++	if (!var->yres)
++		var->yres = 1;
++	if (var->xres > var->xres_virtual)
++		var->xres_virtual = var->xres;
++	if (var->yres > var->yres_virtual)
++		var->yres_virtual = var->yres;
++
++	if(var->bits_per_pixel > VIDEODEPTH)
++		return -EINVAL;
++
++	/*
++	 * Memory limit
++	 */
++	if (((var->yres_virtual * var->bits_per_pixel * var->yres_virtual) >> 3) >
++			ACTUALVIDEOMEMSIZE)
++		return -ENOMEM;
++
++	/*
++	 * Now that we checked it we alter var. The reason being is that the video
++	 * mode passed in might not work but slight changes to it might make it
++	 * work. This way we let the user know what is acceptable.
++	 */
++	switch (var->bits_per_pixel) {
++	case 1:
++		var->red.offset = var->green.offset = var->blue.offset = 0;
++		var->red.length = var->green.length = var->blue.length
++			= var->bits_per_pixel;
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	var->xoffset = var->yoffset = 0;
++	var->red.msb_right = var->green.msb_right = var->blue.msb_right =
++		var->transp.msb_right = 0;
++
++	return 0;
++}
++
++
++/*
++ * This routine actually sets the video mode. It's in here where we
++ * the hardware state info->par and fix which can be affected by the
++ * change in par. For this driver it doesn't do much.
++ */
++static int s1d15605_set_par(struct fb_info *info)
++{
++	int	ret;
++
++	MSG("%s:\n", __func__);
++	MSG("  * resolution: %ux%u (%ux%u virtual)\n",
++		 info->var.xres, info->var.yres,
++		 info->var.xres_virtual, info->var.yres_virtual);
++
++	ret = s1d15605fb_resize_framebuffer(info->par);
++
++	info->fix.visual = FB_VISUAL_MONO10;
++	return ret;
++}
++
++
++/*
++ * Set a single color register. The values supplied are already
++ * rounded down to the hardware's capabilities (according to the
++ * entries in the var structure). Return != 0 for invalid regno.
++ */
++static int s1d15605_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
++			u_int transp, struct fb_info *info)
++{
++	if (regno > 1)	/* no. of hw registers - we only do mono now */
++		return 1;
++
++	return 0;
++}
++
++
++/*
++ * Currently, the routine will simply shut-off the backlight and prevent
++ * updates/refreshes.  Modify according to application.
++ *
++ * 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off
++ */
++static int s1d15605_blank(int blank, struct fb_info *info)
++{
++#ifdef CONFIG_PMAC_BACKLIGHT
++	if (blank)
++		pmac_backlight->props.power = FB_BLANK_POWERDOWN;
++	else
++		pmac_backlight->props.power = FB_BLANK_UNBLANK;
++	backlight_update_status(pmac_backlight);
++#endif
++	return 1;
++}
++
++
++/*
++ * Pan or Wrap the Display
++ *
++ * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag
++ */
++/*
++static int s1d15605_pan_display(struct fb_var_screeninfo *var,
++			struct fb_info *info)
++{
++	if (var->vmode & FB_VMODE_YWRAP) {
++		if (var->yoffset < 0
++		    || var->yoffset >= info->var.yres_virtual
++		    || var->xoffset)
++			return -EINVAL;
++	} else {
++		if (var->xoffset + var->xres > info->var.xres_virtual ||
++		    var->yoffset + var->yres > info->var.yres_virtual)
++			return -EINVAL;
++	}
++	info->var.xoffset = var->xoffset;
++	info->var.yoffset = var->yoffset;
++	if (var->vmode & FB_VMODE_YWRAP)
++		info->var.vmode |= FB_VMODE_YWRAP;
++	else
++		info->var.vmode &= ~FB_VMODE_YWRAP;
++	return 0;
++}
++*/
++
++
++static void s1d15605_copyarea(struct fb_info *info, const struct fb_copyarea *region)
++{
++	cfb_copyarea(info, region);
++	s1d15605_update(info);
++}
++
++
++static void s1d15605_fillrect (struct fb_info *info, const struct fb_fillrect *rect)
++{
++	cfb_fillrect(info, rect);
++	s1d15605_update(info);
++}
++
++
++static void s1d15605_imageblit(struct fb_info *p, const struct fb_image *image)
++{
++	cfb_imageblit(p, image);
++	s1d15605_update(p);
++}
++
++
++/*
++ * Write the users data to our framebuffer, and then trigger a psuedo DMA
++ */
++static ssize_t s1d15605_write(struct file *file, const char *buf,
++			size_t count, loff_t *ppos)
++{
++	unsigned long p = *ppos;
++	struct inode *inode = file->f_dentry->d_inode;
++	int fbidx = iminor(inode);
++	struct fb_info *info = registered_fb[fbidx];
++	int err;
++
++	if (p > info->fix.smem_len)
++		return -ENOSPC;
++	if (count >= info->fix.smem_len)
++		count = info->fix.smem_len;
++	err = 0;
++	if (count + p > info->fix.smem_len) {
++		count = info->fix.smem_len - p;
++		err = -ENOSPC;
++	}
++	if (count) {
++		char *base_addr;
++
++		base_addr = info->screen_base;
++		count -= copy_from_user(base_addr+p, buf, count);
++		*ppos += count;
++		err = -EFAULT;
++	}
++
++	s1d15605_update(info);
++
++	if (count)
++		return count;
++
++	return err;
++}
++
++#ifdef	USE_PRIVATE_VMA_FXS
++static void s1d15605_vma_open(struct vm_area_struct *vma)
++{
++	// FIXME - store stats in the device data via vm_private_data
++}
++
++
++static void s1d15605_vma_close(struct vm_area_struct *vma)
++{
++	// FIXME - store stats in the device data via vm_private_data
++}
++
++
++static struct page *s1d15605_vma_nopage(struct vm_area_struct *vma,
++				unsigned long address, int *type)
++{
++	struct page *page;
++	struct fb_info *info = vma->vm_private_data;
++
++	page = virt_to_page(info->screen_base);
++	get_page(page);
++
++	// FIXME - now someone has a link to our page, start periodically blitting
++	// latest updates to the actual device.
++
++	return page;
++}
++
++
++static struct vm_operations_struct s1d15605_vm_ops = {
++	.open	= s1d15605_vma_open,
++	.close	= s1d15605_vma_close,
++	.nopage	= s1d15605_vma_nopage
++};
++
++
++/* We don't do much here - because we have special vm_ops */
++static int s1d15605_mmap(struct fb_info *info, struct vm_area_struct *vma)
++{
++	vma->vm_ops = &s1d15605_vm_ops;
++	vma->vm_flags |= VM_RESERVED;
++	vma->vm_private_data = info;
++	s1d15605_vma_open(vma);
++
++	return 0;
++}
++#endif /* USE_PRIVATE_VMA_FXS */
++
++
++static struct fb_ops s1d15605fb_ops = {
++	.owner		= THIS_MODULE,
++	.fb_check_var	= s1d15605_check_var,
++	.fb_set_par	= s1d15605_set_par,
++	.fb_setcolreg	= s1d15605_setcolreg,
++	.fb_blank	= s1d15605_blank,
++//	.fb_pan_display	= s1d15605_pan_display,
++	.fb_fillrect	= s1d15605_fillrect,
++	.fb_copyarea	= s1d15605_copyarea,
++	.fb_imageblit	= s1d15605_imageblit,
++	.fb_write	= s1d15605_write,
++#ifdef	USE_PRIVATE_VMA_FXS
++	.fb_mmap	= s1d15605_mmap,
++#endif
++};
++
++
++static void s1d15605_device_init(struct s1d15605fb_info *sinfo) {
++
++	char	value;
++
++	/* release the reset line by reading the device - proto hardware */
++	value = READ_COMMAND;
++	value = READ_COMMAND;
++
++#ifdef CONFIG_MACH_KB9200
++	/* new boards have dedicated reset line */
++	gpio_set_value(sinfo->reset_pin, 1);
++#endif
++
++	/* initialize the device within 5ms */
++	WRITE_COMMAND(RESET_DISPLAY);
++	WRITE_COMMAND(LCD_BIAS_1_9);
++	WRITE_COMMAND(ADC_SELECT_REVERSE);
++	WRITE_COMMAND(COMMON_OUTPUT_NORMAL);
++	WRITE_COMMAND(V5_RESISTOR_RATIO);
++	WRITE_COMMAND(ELECTRONIC_VOLUME_SET);
++	WRITE_COMMAND(ELECTRONIC_VOLUME_INIT);
++	WRITE_COMMAND(POWER_CONTROL_SET | VOLTAGE_REGULATOR | VOLTAGE_FOLLOWER | BOOSTER_CIRCUIT);
++	WRITE_COMMAND(DISPLAY_ON);
++
++	WRITE_COMMAND(RESISTOR_RATIO_START + 4);
++	WRITE_COMMAND(ELECTRONIC_VOLUME_SET);
++	WRITE_COMMAND(0x33);
++}
++
++
++static int s1d15605fb_probe(struct platform_device *pdev)
++{
++	struct device *dev = &pdev->dev;
++	struct fb_info *info;
++	struct s1d15605fb_info *sinfo;
++	int ret;
++
++	MSG("%s\n", __func__);
++
++	if (!(info = framebuffer_alloc(sizeof(struct s1d15605fb_info), dev))) {
++		dev_err(dev, "Cannot allocate framebuffer struct\n");
++		return -ENOMEM;
++	}
++
++	sinfo = info->par;
++	sinfo->info = info;
++	sinfo->pdev = pdev;
++
++	if (pdev->num_resources < 2) {
++		dev_err(dev, "Resources unusable\n");
++		ret = -ENODEV;
++		goto free_info;
++	}
++
++	info->fbops = &s1d15605fb_ops;
++	strcpy(info->fix.id, pdev->name);
++
++	info->fix.mmio_start = pdev->resource[0].start;
++	info->fix.mmio_len = pdev->resource[0].end - pdev->resource[0].start + 1;
++	sinfo->reset_pin = pdev->resource[1].start;
++
++	ret = s1d15605fb_resize_framebuffer(sinfo);
++	if (ret < 0) {
++		dev_err(dev, "Cannot resize framebuffer: %d\n", ret);
++		goto free_fb;
++	}
++
++	if (!request_mem_region(info->fix.mmio_start,
++				info->fix.mmio_len, pdev->name)) {
++		ret = -EBUSY;
++		goto free_fb;
++	}
++
++	sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
++	if (!sinfo->mmio) {
++		dev_err(dev, "Cannot map LCD memory region\n");
++		goto release_mem;
++	}
++
++	s1d15605_device_init(sinfo);
++
++	ret = fb_find_mode(&info->var, info, NULL, NULL, 0, NULL, 1);
++
++	if (!ret || (ret == 4))
++		info->var = s1d15605_default;
++
++	info->fix = s1d15605_fix;
++	info->flags = FBINFO_FLAG_DEFAULT |
++/*		FBINFO_HWACCEL_YPAN | */
++		FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA;
++
++	ret = register_framebuffer(info);
++	if (ret < 0) {
++		dev_err(dev, "Failed to register framebuffer device: %d\n", ret);
++		goto unmap_mmio;
++	}
++
++	dev_set_drvdata(dev, info);
++
++	memset(info->screen_base, 0, info->fix.smem_len);
++	info->var.activate |= FB_ACTIVATE_NOW;
++	ret = fb_set_var(info, &info->var);
++	if (ret) {
++		dev_warn(dev, "Unable to set display parameters\n");
++	}
++
++	info->var.activate &= ~(FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW);
++
++	dev_dbg(dev, "%s SUCCESS\n", __func__);
++
++	dev_info(dev, "Driver $Revision: 1.1 $\n");
++
++	return 0;
++
++unmap_mmio:
++	iounmap(sinfo->mmio);
++release_mem:
++	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
++free_fb:
++	kfree(info->screen_base);
++
++free_info:
++	framebuffer_release(info);
++
++	dev_dbg(dev, "%s FAILED\n", __func__);
++	return ret;
++}
++
++
++static int s1d15605fb_remove(struct platform_device *pdev)
++{
++	struct device *dev = &pdev->dev;
++	struct fb_info *info = dev_get_drvdata(dev);
++	struct s1d15605fb_info *sinfo = info->par;
++
++	if (!sinfo)
++		return 0;
++
++	unregister_framebuffer(info);
++
++	iounmap(sinfo->mmio);
++	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
++
++	kfree(info->screen_base);
++
++	dev_set_drvdata(dev, NULL);
++	framebuffer_release(info);
++	return 0;
++}
++
++
++static struct platform_driver s1d15605fb_driver = {
++	.probe		= s1d15605fb_probe,
++	.remove		= s1d15605fb_remove,
++	.driver		= {
++		.name	= "s1d15605fb",
++		.owner	= THIS_MODULE,
++	},
++};
++
++
++static int __init s1d15605fb_init(void)
++{
++	return platform_driver_register(&s1d15605fb_driver);
++}
++
++
++static void __exit s1d15605fb_exit(void)
++{
++	platform_driver_unregister(&s1d15605fb_driver);
++}
++
++
++module_init(s1d15605fb_init);
++module_exit(s1d15605fb_exit);
++
++
++MODULE_AUTHOR("KwikByte");
++MODULE_DESCRIPTION("Epson S1D15605 LCD Controller framebuffer driver");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.22.1/drivers/video/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/video/Kconfig	(revision 1)
++++ linux-2.6.22.1/drivers/video/Kconfig	(arbetskopia)
+@@ -822,6 +822,17 @@
+ 	  framebuffer.  Product specs at
+ 	  <http://www.erd.epson.com/vdc/html/products.htm>.
+ 
++config FB_S1D15605
++	tristate "Epson S1D15605 framebuffer support"
++	depends on FB
++	default m if MACH_KB9200
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  Build in support for the S1D15605 Epson Research 128x64
++	  LCD controller as a framebuffer.
++
+ config FB_S1D13XXX
+ 	tristate "Epson S1D13XXX framebuffer support"
+ 	depends on FB
+@@ -835,7 +846,7 @@
+ 
+ config FB_ATMEL
+ 	tristate "AT91/AT32 LCD Controller support"
+-	depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32)
++	depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || AVR32)
+ 	select FB_CFB_FILLRECT
+ 	select FB_CFB_COPYAREA
+ 	select FB_CFB_IMAGEBLIT
+@@ -849,6 +860,16 @@
+ 	  Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
+ 	  to let frame buffer in external SDRAM.
+ 
++config FB_ATMEL_STN
++	bool "Use a STN display with AT91/AT32 LCD Controller"
++	depends on FB_ATMEL && ARCH_AT91SAM9261
++	default n
++	help
++	  Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
++	  Controller. Say N if you want to connect a TFT.
++
++	  If unsure, say N.
++
+ config FB_NVIDIA
+ 	tristate "nVidia Framebuffer Support"
+ 	depends on FB && PCI
+Index: linux-2.6.22.1/drivers/video/atmel_lcdfb.c
+===================================================================
+--- linux-2.6.22.1/drivers/video/atmel_lcdfb.c	(revision 1)
++++ linux-2.6.22.1/drivers/video/atmel_lcdfb.c	(arbetskopia)
+@@ -37,7 +37,9 @@
+ #endif
+ 
+ #if defined(CONFIG_ARCH_AT91)
+-#define	ATMEL_LCDFB_FBINFO_DEFAULT	FBINFO_DEFAULT
++#define	ATMEL_LCDFB_FBINFO_DEFAULT	(FBINFO_DEFAULT \
++					 | FBINFO_PARTIAL_PAN_OK \
++					 | FBINFO_HWACCEL_YPAN)
+ 
+ static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
+ 					struct fb_var_screeninfo *var)
+@@ -74,12 +76,35 @@
+ 	.type		= FB_TYPE_PACKED_PIXELS,
+ 	.visual		= FB_VISUAL_TRUECOLOR,
+ 	.xpanstep	= 0,
+-	.ypanstep	= 0,
++	.ypanstep	= 1,
+ 	.ywrapstep	= 0,
+ 	.accel		= FB_ACCEL_NONE,
+ };
+ 
++static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
++{
++	unsigned long value;
+ 
++	if (!(cpu_is_at91sam9261() || cpu_is_at32ap7000()))
++		return xres;
++
++	value = xres;
++	if ((lcdcon2 & ATMEL_LCDC_DISTYPE) != ATMEL_LCDC_DISTYPE_TFT) {
++		/* STN display */
++		if ((lcdcon2 & ATMEL_LCDC_DISTYPE) == ATMEL_LCDC_DISTYPE_STNCOLOR) {
++			value *= 3;
++		}
++		if ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_4
++		   || ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_8
++		      && (lcdcon2 & ATMEL_LCDC_SCANMOD) == ATMEL_LCDC_SCANMOD_DUAL ))
++			value = DIV_ROUND_UP(value, 4);
++		else
++			value = DIV_ROUND_UP(value, 8);
++	}
++
++	return value;
++}
++
+ static void atmel_lcdfb_update_dma(struct fb_info *info,
+ 			       struct fb_var_screeninfo *var)
+ {
+@@ -181,6 +206,7 @@
+ 	var->xoffset = var->yoffset = 0;
+ 
+ 	switch (var->bits_per_pixel) {
++	case 1:
+ 	case 2:
+ 	case 4:
+ 	case 8:
+@@ -195,8 +221,11 @@
+ 		var->blue.offset = 10;
+ 		var->red.length = var->green.length = var->blue.length = 5;
+ 		break;
++	case 32:
++		var->transp.offset = 24;
++		var->transp.length = 8;
++		/* fall through */
+ 	case 24:
+-	case 32:
+ 		var->red.offset = 0;
+ 		var->green.offset = 8;
+ 		var->blue.offset = 16;
+@@ -228,8 +257,10 @@
+ static int atmel_lcdfb_set_par(struct fb_info *info)
+ {
+ 	struct atmel_lcdfb_info *sinfo = info->par;
++	unsigned long hozval_linesz;
+ 	unsigned long value;
+ 	unsigned long clk_value_khz;
++	unsigned long bits_per_line;
+ 
+ 	dev_dbg(info->device, "%s:\n", __func__);
+ 	dev_dbg(info->device, "  * resolution: %ux%u (%ux%u virtual)\n",
+@@ -241,12 +272,15 @@
+ 
+ 	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+ 
+-	if (info->var.bits_per_pixel <= 8)
++	if (info->var.bits_per_pixel == 1)
++		info->fix.visual = FB_VISUAL_MONO01;
++	else if (info->var.bits_per_pixel <= 8)
+ 		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ 	else
+ 		info->fix.visual = FB_VISUAL_TRUECOLOR;
+ 
+-	info->fix.line_length = info->var.xres_virtual * (info->var.bits_per_pixel / 8);
++	bits_per_line = info->var.xres_virtual * info->var.bits_per_pixel;
++	info->fix.line_length = DIV_ROUND_UP(bits_per_line, 8);
+ 
+ 	/* Re-initialize the DMA engine... */
+ 	dev_dbg(info->device, "  * update DMA engine\n");
+@@ -262,19 +296,22 @@
+ 	/* Set pixel clock */
+ 	clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
+ 
+-	value = clk_value_khz / PICOS2KHZ(info->var.pixclock);
++	value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock));
+ 
+-	if (clk_value_khz % PICOS2KHZ(info->var.pixclock))
+-		value++;
+-
+ 	value = (value / 2) - 1;
++	dev_dbg(info->device, "  * programming CLKVAL = 0x%08lx\n", value);
+ 
+ 	if (value <= 0) {
+ 		dev_notice(info->device, "Bypassing pixel clock divider\n");
+ 		lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
+-	} else
++	} else {
+ 		lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET);
++		info->var.pixclock = KHZ2PICOS(clk_value_khz / (2 * (value + 1)));
++		dev_dbg(info->device, "  updated pixclk:     %lu KHz\n",
++					PICOS2KHZ(info->var.pixclock));
++	}
+ 
++
+ 	/* Initialize control register 2 */
+ 	value = sinfo->default_lcdcon2;
+ 
+@@ -311,9 +348,14 @@
+ 	dev_dbg(info->device, "  * LCDTIM2 = %08lx\n", value);
+ 	lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
+ 
++	/* Horizontal value (aka line size) */
++	hozval_linesz = compute_hozval(info->var.xres,
++					lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2));
++
+ 	/* Display size */
+-	value = (info->var.xres - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
++	value = (hozval_linesz - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
+ 	value |= info->var.yres - 1;
++	dev_dbg(info->device, "  * LCDFRMCFG = %08lx\n", value);
+ 	lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
+ 
+ 	/* FIFO Threshold: Use formula from data sheet */
+@@ -421,6 +463,15 @@
+ 			ret = 0;
+ 		}
+ 		break;
++
++	case FB_VISUAL_MONO01:
++		if (regno < 2) {
++			val = (regno == 0) ? 0x00 : 0x1F;
++			lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
++			ret = 0;
++		}
++		break;
++
+ 	}
+ 
+ 	return ret;
+Index: linux-2.6.22.1/drivers/video/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/video/Makefile	(revision 1)
++++ linux-2.6.22.1/drivers/video/Makefile	(arbetskopia)
+@@ -87,7 +87,8 @@
+ obj-$(CONFIG_FB_SA1100)           += sa1100fb.o
+ obj-$(CONFIG_FB_HIT)              += hitfb.o
+ obj-$(CONFIG_FB_EPSON1355)	  += epson1355fb.o
+-obj-$(CONFIG_FB_ATMEL)		  += atmel_lcdfb.o
++obj-$(CONFIG_FB_S1D15605)	  += s1d15605fb.o
++obj-$(CONFIG_FB_ATMEL)            += atmel_lcdfb.o
+ obj-$(CONFIG_FB_PVR2)             += pvr2fb.o
+ obj-$(CONFIG_FB_VOODOO1)          += sstfb.o
+ obj-$(CONFIG_FB_ARMCLCD)	  += amba-clcd.o
+Index: linux-2.6.22.1/drivers/video/backlight/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/video/backlight/Kconfig	(revision 1)
++++ linux-2.6.22.1/drivers/video/backlight/Kconfig	(arbetskopia)
+@@ -8,26 +8,44 @@
+ 	  Enable this to be able to choose the drivers for controlling the
+ 	  backlight and the LCD panel on some platforms, for example on PDAs.
+ 
+-config BACKLIGHT_CLASS_DEVICE
+-        tristate "Lowlevel Backlight controls"
++#
++# LCD
++#
++config LCD_CLASS_DEVICE
++        tristate "Lowlevel LCD controls"
+ 	depends on BACKLIGHT_LCD_SUPPORT
+ 	default m
+ 	help
+-	  This framework adds support for low-level control of the LCD
+-          backlight. This includes support for brightness and power.
++	  This framework adds support for low-level control of LCD.
++	  Some framebuffer devices connect to platform-specific LCD modules
++	  in order to have a platform-specific way to control the flat panel
++	  (contrast and applying power to the LCD (not to the backlight!)).
+ 
+ 	  To have support for your specific LCD panel you will have to
+ 	  select the proper drivers which depend on this option.
+ 
+-config LCD_CLASS_DEVICE
+-        tristate "Lowlevel LCD controls"
++config LCD_LTV350QV
++	tristate "Samsung LTV350QV LCD Panel"
++	depends on LCD_CLASS_DEVICE && SPI_MASTER
++	default n
++	help
++	  If you have a Samsung LTV350QV LCD panel, say y to include a
++	  power control driver for it.  The panel starts up in power
++	  off state, so you need this driver in order to see any
++	  output.
++
++	  The LTV350QV panel is present on all ATSTK1000 boards.
++
++#
++# Backlight
++#
++config BACKLIGHT_CLASS_DEVICE
++        tristate "Lowlevel Backlight controls"
+ 	depends on BACKLIGHT_LCD_SUPPORT
+ 	default m
+ 	help
+-	  This framework adds support for low-level control of LCD.
+-	  Some framebuffer devices connect to platform-specific LCD modules
+-	  in order to have a platform-specific way to control the flat panel
+-	  (contrast and applying power to the LCD (not to the backlight!)).
++	  This framework adds support for low-level control of the LCD
++          backlight. This includes support for brightness and power.
+ 
+ 	  To have support for your specific LCD panel you will have to
+ 	  select the proper drivers which depend on this option.
+@@ -71,3 +89,11 @@
+ 	help
+ 	  If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
+ 	  backlight driver.
++
++config BACKLIGHT_KB920x
++	tristate "KwikByte KB9202 Backlight Driver"
++	depends on BACKLIGHT_CLASS_DEVICE && MACH_KB9200
++	default y
++	help
++	  If you have a KwikByte KB9202 board, say Y to enable the
++	  backlight driver.
+Index: linux-2.6.22.1/drivers/video/backlight/ltv350qv.c
+===================================================================
+--- linux-2.6.22.1/drivers/video/backlight/ltv350qv.c	(revision 0)
++++ linux-2.6.22.1/drivers/video/backlight/ltv350qv.c	(revision 0)
+@@ -0,0 +1,340 @@
++/*
++ * Power control for Samsung LTV350QV Quarter VGA LCD Panel
++ *
++ * Copyright (C) 2006, 2007 Atmel Corporation
 + *
 + * This program is free software; you can redistribute it and/or modify
 + * it under the terms of the GNU General Public License version 2 as
 + * published by the Free Software Foundation.
-+ *
 + */
-+#include <linux/kernel.h>
++#include <linux/delay.h>
++#include <linux/err.h>
++#include <linux/fb.h>
 +#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include <linux/workqueue.h>
++#include <linux/lcd.h>
++#include <linux/module.h>
++#include <linux/spi/spi.h>
 +
-+#include <asm/gpio.h>
++#include "ltv350qv.h"
 +
-+struct gpio_led_data {
-+	struct led_classdev cdev;
-+	unsigned gpio;
-+	struct work_struct work;
-+	u8 new_level;
-+	u8 can_sleep;
-+	u8 active_low;
++#define POWER_IS_ON(pwr)	((pwr) <= FB_BLANK_NORMAL)
++
++struct ltv350qv {
++	struct spi_device	*spi;
++	u8			*buffer;
++	int			power;
++	struct lcd_device	*ld;
 +};
 +
-+static void gpio_led_work(struct work_struct *work)
++/*
++ * The power-on and power-off sequences are taken from the
++ * LTV350QV-F04 data sheet from Samsung. The register definitions are
++ * taken from the S6F2002 command list also from Samsung. Both
++ * documents are distributed with the AVR32 Linux BSP CD from Atmel.
++ *
++ * There's still some voodoo going on here, but it's a lot better than
++ * in the first incarnation of the driver where all we had was the raw
++ * numbers from the initialization sequence.
++ */
++static int ltv350qv_write_reg(struct ltv350qv *lcd, u8 reg, u16 val)
 +{
-+	struct gpio_led_data	*led_dat =
-+		container_of(work, struct gpio_led_data, work);
++	struct spi_message msg;
++	struct spi_transfer index_xfer = {
++		.len		= 3,
++		.cs_change	= 1,
++	};
++	struct spi_transfer value_xfer = {
++		.len		= 3,
++		.cs_change	= 1,
++	};
 +
-+	gpio_set_value_cansleep(led_dat->gpio, led_dat->new_level);
++	spi_message_init(&msg);
++
++	/* register index */
++	lcd->buffer[0] = LTV_OPC_INDEX;
++	lcd->buffer[1] = 0x00;
++	lcd->buffer[2] = reg & 0x7f;
++	index_xfer.tx_buf = lcd->buffer;
++	spi_message_add_tail(&index_xfer, &msg);
++
++	/* register value */
++	lcd->buffer[4] = LTV_OPC_DATA;
++	lcd->buffer[5] = val >> 8;
++	lcd->buffer[6] = val;
++	value_xfer.tx_buf = lcd->buffer + 4;
++	spi_message_add_tail(&value_xfer, &msg);
++
++	return spi_sync(lcd->spi, &msg);
 +}
 +
-+static void gpio_led_set(struct led_classdev *led_cdev,
-+	enum led_brightness value)
++/* The comments are taken straight from the data sheet */
++static int ltv350qv_power_on(struct ltv350qv *lcd)
 +{
-+	struct gpio_led_data *led_dat =
-+		container_of(led_cdev, struct gpio_led_data, cdev);
-+	int level;
++	int ret;
 +
-+	if (value == LED_OFF)
-+		level = 0;
-+	else
-+		level = 1;
++	/* Power On Reset Display off State */
++	if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, 0x0000))
++		goto err;
++	msleep(15);
 +
-+	if (led_dat->active_low)
-+		level = !level;
++	/* Power Setting Function 1 */
++	if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE))
++		goto err;
++	if (ltv350qv_write_reg(lcd, LTV_PWRCTL2, LTV_VCOML_ENABLE))
++		goto err_power1;
 +
-+	/* setting GPIOs with I2C/etc requires a preemptible task context */
-+	if (led_dat->can_sleep) {
-+		if (preempt_count()) {
-+			led_dat->new_level = level;
-+			schedule_work(&led_dat->work);
-+		} else
-+			gpio_set_value_cansleep(led_dat->gpio, level);
-+	} else
-+		gpio_set_value(led_dat->gpio, level);
-+}
++	/* Power Setting Function 2 */
++	if (ltv350qv_write_reg(lcd, LTV_PWRCTL1,
++			       LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
++			       | LTV_SUPPLY_CURRENT(5)))
++		goto err_power2;
 +
-+static int __init gpio_led_probe(struct platform_device *pdev)
-+{
-+	struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
-+	struct gpio_led *cur_led;
-+	struct gpio_led_data *leds_data, *led_dat;
-+	int i, ret = 0;
++	msleep(55);
 +
-+	if (!pdata)
-+		return -EBUSY;
++	/* Instruction Setting */
++	ret = ltv350qv_write_reg(lcd, LTV_IFCTL,
++				 LTV_NMD | LTV_REV | LTV_NL(0x1d));
++	ret |= ltv350qv_write_reg(lcd, LTV_DATACTL,
++				  LTV_DS_SAME | LTV_CHS_480
++				  | LTV_DF_RGB | LTV_RGB_BGR);
++	ret |= ltv350qv_write_reg(lcd, LTV_ENTRY_MODE,
++				  LTV_VSPL_ACTIVE_LOW
++				  | LTV_HSPL_ACTIVE_LOW
++				  | LTV_DPL_SAMPLE_RISING
++				  | LTV_EPL_ACTIVE_LOW
++				  | LTV_SS_RIGHT_TO_LEFT);
++	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL1, LTV_CLW(3));
++	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
++				  LTV_NW_INV_1LINE | LTV_FWI(3));
++	ret |= ltv350qv_write_reg(lcd, LTV_VBP, 0x000a);
++	ret |= ltv350qv_write_reg(lcd, LTV_HBP, 0x0021);
++	ret |= ltv350qv_write_reg(lcd, LTV_SOTCTL, LTV_SDT(3) | LTV_EQ(0));
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(0), 0x0103);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(1), 0x0301);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(2), 0x1f0f);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(3), 0x1f0f);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(4), 0x0707);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(5), 0x0307);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(6), 0x0707);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(7), 0x0000);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(8), 0x0004);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(9), 0x0000);
++	if (ret)
++		goto err_settings;
 +
-+	leds_data = kzalloc(sizeof(struct gpio_led_data) * pdata->num_leds,
-+				GFP_KERNEL);
-+	if (!leds_data)
-+		return -ENOMEM;
++	/* Wait more than 2 frames */
++	msleep(20);
 +
-+	for (i = 0; i < pdata->num_leds; i++) {
-+		cur_led = &pdata->leds[i];
-+		led_dat = &leds_data[i];
-+
-+		led_dat->cdev.name = cur_led->name;
-+		led_dat->cdev.default_trigger = cur_led->default_trigger;
-+		led_dat->gpio = cur_led->gpio;
-+		led_dat->can_sleep = gpio_cansleep(cur_led->gpio);
-+		led_dat->active_low = cur_led->active_low;
-+		led_dat->cdev.brightness_set = gpio_led_set;
-+		led_dat->cdev.brightness = cur_led->active_low ? LED_FULL : LED_OFF;
-+
-+		ret = gpio_request(led_dat->gpio, led_dat->cdev.name);
-+		if (ret < 0)
-+			goto err;
-+
-+		gpio_direction_output(led_dat->gpio, led_dat->active_low);
-+
-+		ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
-+		if (ret < 0) {
-+			gpio_free(led_dat->gpio);
-+			goto err;
-+		}
-+
-+		INIT_WORK(&led_dat->work, gpio_led_work);
-+	}
-+
-+	platform_set_drvdata(pdev, leds_data);
++	/* Display On Sequence */
++	ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
++				 LTV_VCOM_DISABLE | LTV_VCOMOUT_ENABLE
++				 | LTV_POWER_ON | LTV_DRIVE_CURRENT(5)
++				 | LTV_SUPPLY_CURRENT(5));
++	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
++				  LTV_NW_INV_1LINE | LTV_DSC | LTV_FWI(3));
++	if (ret)
++		goto err_disp_on;
 +
++	/* Display should now be ON. Phew. */
 +	return 0;
 +
++err_disp_on:
++	/*
++	 * Try to recover. Error handling probably isn't very useful
++	 * at this point, just make a best effort to switch the panel
++	 * off.
++	 */
++	ltv350qv_write_reg(lcd, LTV_PWRCTL1,
++			   LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
++			   | LTV_SUPPLY_CURRENT(5));
++	ltv350qv_write_reg(lcd, LTV_GATECTL2,
++			   LTV_NW_INV_1LINE | LTV_FWI(3));
++err_settings:
++err_power2:
++err_power1:
++	ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
++	msleep(1);
 +err:
-+	if (i > 0) {
-+		for (i = i - 1; i >= 0; i--) {
-+			led_classdev_unregister(&leds_data[i].cdev);
-+			gpio_free(leds_data[i].gpio);
-+		}
-+	}
++	ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
++	return -EIO;
++}
 +
-+	flush_scheduled_work();
-+	kfree(leds_data);
++static int ltv350qv_power_off(struct ltv350qv *lcd)
++{
++	int ret;
++
++	/* Display Off Sequence */
++	ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
++				 LTV_VCOM_DISABLE
++				 | LTV_DRIVE_CURRENT(5)
++				 | LTV_SUPPLY_CURRENT(5));
++	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
++				  LTV_NW_INV_1LINE | LTV_FWI(3));
++
++	/* Power down setting 1 */
++	ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
++
++	/* Wait at least 1 ms */
++	msleep(1);
++
++	/* Power down setting 2 */
++	ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
++
++	/*
++	 * No point in trying to recover here. If we can't switch the
++	 * panel off, what are we supposed to do other than inform the
++	 * user about the failure?
++	 */
++	if (ret)
++		return -EIO;
++
++	/* Display power should now be OFF */
++	return 0;
++}
++
++static int ltv350qv_power(struct ltv350qv *lcd, int power)
++{
++	int ret = 0;
++
++	if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
++		ret = ltv350qv_power_on(lcd);
++	else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
++		ret = ltv350qv_power_off(lcd);
++
++	if (!ret)
++		lcd->power = power;
 +
 +	return ret;
 +}
 +
-+static int __exit gpio_led_remove(struct platform_device *pdev)
++static int ltv350qv_set_power(struct lcd_device *ld, int power)
 +{
-+	int i;
-+	struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
-+	struct gpio_led_data *leds_data;
++	struct ltv350qv *lcd;
 +
-+	leds_data = platform_get_drvdata(pdev);
++	lcd = class_get_devdata(&ld->class_dev);
++	return ltv350qv_power(lcd, power);
++}
 +
-+	for (i = 0; i < pdata->num_leds; i++) {
-+		led_classdev_unregister(&leds_data[i].cdev);
-+		gpio_free(leds_data[i].gpio);
++static int ltv350qv_get_power(struct lcd_device *ld)
++{
++	struct ltv350qv *lcd;
++
++	lcd = class_get_devdata(&ld->class_dev);
++	return lcd->power;
++}
++
++static struct lcd_ops ltv_ops = {
++	.get_power	= ltv350qv_get_power,
++	.set_power	= ltv350qv_set_power,
++};
++
++static int __devinit ltv350qv_probe(struct spi_device *spi)
++{
++	struct ltv350qv *lcd;
++	struct lcd_device *ld;
++	int ret;
++
++	lcd = kzalloc(sizeof(struct ltv350qv), GFP_KERNEL);
++	if (!lcd)
++		return -ENOMEM;
++
++	lcd->spi = spi;
++	lcd->power = FB_BLANK_POWERDOWN;
++	lcd->buffer = kzalloc(8, GFP_KERNEL);
++
++	ld = lcd_device_register("ltv350qv", lcd, &ltv_ops);
++	if (IS_ERR(ld)) {
++		ret = PTR_ERR(ld);
++		goto out_free_lcd;
 +	}
-+	
-+	kfree(leds_data);
++	lcd->ld = ld;
++
++	ret = ltv350qv_power(lcd, FB_BLANK_UNBLANK);
++	if (ret)
++		goto out_unregister;
++
++	dev_set_drvdata(&spi->dev, lcd);
++
++	return 0;
++
++out_unregister:
++	lcd_device_unregister(ld);
++out_free_lcd:
++	kfree(lcd);
++	return ret;
++}
++
++static int __devexit ltv350qv_remove(struct spi_device *spi)
++{
++	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++
++	ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++	lcd_device_unregister(lcd->ld);
++	kfree(lcd);
 +
 +	return 0;
 +}
 +
 +#ifdef CONFIG_PM
-+static int gpio_led_suspend(struct platform_device *pdev, pm_message_t state)
++static int ltv350qv_suspend(struct spi_device *spi,
++			    pm_message_t state, u32 level)
 +{
-+	struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
-+	struct gpio_led_data *leds_data;
-+	int i;
-+	
-+	leds_data = platform_get_drvdata(pdev);
++	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
 +
-+	for (i = 0; i < pdata->num_leds; i++)
-+		led_classdev_suspend(&leds_data[i].cdev);
++	if (level == SUSPEND_POWER_DOWN)
++		return ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
 +
 +	return 0;
 +}
 +
-+static int gpio_led_resume(struct platform_device *pdev)
++static int ltv350qv_resume(struct spi_device *spi, u32 level)
 +{
-+	struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
-+	struct gpio_led_data *leds_data;
-+	int i;
++	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
 +
-+	leds_data = platform_get_drvdata(pdev);
-+
-+	for (i = 0; i < pdata->num_leds; i++)
-+		led_classdev_resume(&leds_data[i].cdev);
++	if (level == RESUME_POWER_ON)
++		return ltv350qv_power(lcd, FB_BLANK_UNBLANK);
 +
 +	return 0;
 +}
 +#else
-+#define gpio_led_suspend NULL
-+#define gpio_led_resume NULL
++#define ltv350qv_suspend	NULL
++#define ltv350qv_resume		NULL
 +#endif
 +
-+static struct platform_driver gpio_led_driver = {
-+	.remove		= __exit_p(gpio_led_remove),
-+	.suspend	= gpio_led_suspend,
-+	.resume		= gpio_led_resume,
-+	.driver		= {
-+		.name	= "leds-gpio",
-+		.owner	= THIS_MODULE,
++/* Power down all displays on reboot, poweroff or halt */
++static void ltv350qv_shutdown(struct spi_device *spi)
++{
++	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++
++	ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++}
++
++static struct spi_driver ltv350qv_driver = {
++	.driver = {
++		.name		= "ltv350qv",
++		.bus		= &spi_bus_type,
++		.owner		= THIS_MODULE,
 +	},
++
++	.probe		= ltv350qv_probe,
++	.remove		= __devexit_p(ltv350qv_remove),
++	.shutdown	= ltv350qv_shutdown,
++	.suspend	= ltv350qv_suspend,
++	.resume		= ltv350qv_resume,
 +};
 +
-+static int __init gpio_led_init(void)
++static int __init ltv350qv_init(void)
 +{
-+	return platform_driver_probe(&gpio_led_driver, gpio_led_probe);
++	return spi_register_driver(&ltv350qv_driver);
 +}
 +
-+static void __exit gpio_led_exit(void)
++static void __exit ltv350qv_exit(void)
 +{
-+	platform_driver_unregister(&gpio_led_driver);
++	spi_unregister_driver(&ltv350qv_driver);
 +}
++module_init(ltv350qv_init);
++module_exit(ltv350qv_exit);
 +
-+module_init(gpio_led_init);
-+module_exit(gpio_led_exit);
-+
-+MODULE_AUTHOR("Raphael Assenat <raph@8d.com>");
-+MODULE_DESCRIPTION("GPIO LED driver");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver");
 +MODULE_LICENSE("GPL");
-diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
-index 616eee9..0810d83 100644
---- a/drivers/misc/Kconfig
-+++ b/drivers/misc/Kconfig
-@@ -187,5 +187,15 @@ config THINKPAD_ACPI_BAY
- 
- 	  If you are not sure, say Y here.
- 
-+config ATMEL_SSC
-+	tristate "Device driver for Atmel SSC peripheral"
-+	depends on AVR32 || ARCH_AT91
-+	---help---
-+	  This option enables device driver support for Atmel Syncronized
-+	  Serial Communication peripheral (SSC).
-+
-+	  The SSC peripheral supports a wide variety of serial frame based
-+	  communications, i.e. I2S, SPI, etc.
- 
-+	  If unsure, say N.
- endmenu
-diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
-index 8abbf2f..2d52cc6 100644
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -14,3 +14,4 @@ obj-$(CONFIG_PHANTOM)		+= phantom.o
- obj-$(CONFIG_SGI_IOC4)		+= ioc4.o
- obj-$(CONFIG_SONY_LAPTOP)	+= sony-laptop.o
- obj-$(CONFIG_THINKPAD_ACPI)	+= thinkpad_acpi.o
-+obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
-diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
-new file mode 100644
-index 0000000..058ccac
---- /dev/null
-+++ b/drivers/misc/atmel-ssc.c
-@@ -0,0 +1,174 @@
+Index: linux-2.6.22.1/drivers/video/backlight/ltv350qv.h
+===================================================================
+--- linux-2.6.22.1/drivers/video/backlight/ltv350qv.h	(revision 0)
++++ linux-2.6.22.1/drivers/video/backlight/ltv350qv.h	(revision 0)
+@@ -0,0 +1,95 @@
 +/*
-+ * Atmel SSC driver
++ * Register definitions for Samsung LTV350QV Quarter VGA LCD Panel
 + *
-+ * Copyright (C) 2007 Atmel Corporation
++ * Copyright (C) 2006, 2007 Atmel Corporation
 + *
 + * This program is free software; you can redistribute it and/or modify
 + * it under the terms of the GNU General Public License version 2 as
 + * published by the Free Software Foundation.
 + */
++#ifndef __LTV350QV_H
++#define __LTV350QV_H
 +
++#define LTV_OPC_INDEX	0x74
++#define LTV_OPC_DATA	0x76
++
++#define LTV_ID		0x00		/* ID Read */
++#define LTV_IFCTL	0x01		/* Display Interface Control */
++#define LTV_DATACTL	0x02		/* Display Data Control */
++#define LTV_ENTRY_MODE	0x03		/* Entry Mode */
++#define LTV_GATECTL1	0x04		/* Gate Control 1 */
++#define LTV_GATECTL2	0x05		/* Gate Control 2 */
++#define LTV_VBP		0x06		/* Vertical Back Porch */
++#define LTV_HBP		0x07		/* Horizontal Back Porch */
++#define LTV_SOTCTL	0x08		/* Source Output Timing Control */
++#define LTV_PWRCTL1	0x09		/* Power Control 1 */
++#define LTV_PWRCTL2	0x0a		/* Power Control 2 */
++#define LTV_GAMMA(x)	(0x10 + (x))	/* Gamma control */
++
++/* Bit definitions for LTV_IFCTL */
++#define LTV_IM			(1 << 15)
++#define LTV_NMD			(1 << 14)
++#define LTV_SSMD		(1 << 13)
++#define LTV_REV			(1 <<  7)
++#define LTV_NL(x)		(((x) & 0x001f) << 0)
++
++/* Bit definitions for LTV_DATACTL */
++#define LTV_DS_SAME		(0 << 12)
++#define LTV_DS_D_TO_S		(1 << 12)
++#define LTV_DS_S_TO_D		(2 << 12)
++#define LTV_CHS_384		(0 <<  9)
++#define LTV_CHS_480		(1 <<  9)
++#define LTV_CHS_492		(2 <<  9)
++#define LTV_DF_RGB		(0 <<  6)
++#define LTV_DF_RGBX		(1 <<  6)
++#define LTV_DF_XRGB		(2 <<  6)
++#define LTV_RGB_RGB		(0 <<  2)
++#define LTV_RGB_BGR		(1 <<  2)
++#define LTV_RGB_GRB		(2 <<  2)
++#define LTV_RGB_RBG		(3 <<  2)
++
++/* Bit definitions for LTV_ENTRY_MODE */
++#define LTV_VSPL_ACTIVE_LOW	(0 << 15)
++#define LTV_VSPL_ACTIVE_HIGH	(1 << 15)
++#define LTV_HSPL_ACTIVE_LOW	(0 << 14)
++#define LTV_HSPL_ACTIVE_HIGH	(1 << 14)
++#define LTV_DPL_SAMPLE_RISING	(0 << 13)
++#define LTV_DPL_SAMPLE_FALLING	(1 << 13)
++#define LTV_EPL_ACTIVE_LOW	(0 << 12)
++#define LTV_EPL_ACTIVE_HIGH	(1 << 12)
++#define LTV_SS_LEFT_TO_RIGHT	(0 <<  8)
++#define LTV_SS_RIGHT_TO_LEFT	(1 <<  8)
++#define LTV_STB			(1 <<  1)
++
++/* Bit definitions for LTV_GATECTL1 */
++#define LTV_CLW(x)		(((x) & 0x0007) << 12)
++#define LTV_GAON		(1 <<  5)
++#define LTV_SDR			(1 <<  3)
++
++/* Bit definitions for LTV_GATECTL2 */
++#define LTV_NW_INV_FRAME	(0 << 14)
++#define LTV_NW_INV_1LINE	(1 << 14)
++#define LTV_NW_INV_2LINE	(2 << 14)
++#define LTV_DSC			(1 << 12)
++#define LTV_GIF			(1 <<  8)
++#define LTV_FHN			(1 <<  7)
++#define LTV_FTI(x)		(((x) & 0x0003) << 4)
++#define LTV_FWI(x)		(((x) & 0x0003) << 0)
++
++/* Bit definitions for LTV_SOTCTL */
++#define LTV_SDT(x)		(((x) & 0x0007) << 10)
++#define LTV_EQ(x)		(((x) & 0x0007) <<  2)
++
++/* Bit definitions for LTV_PWRCTL1 */
++#define LTV_VCOM_DISABLE	(1 << 14)
++#define LTV_VCOMOUT_ENABLE	(1 << 11)
++#define LTV_POWER_ON		(1 <<  9)
++#define LTV_DRIVE_CURRENT(x)	(((x) & 0x0007) << 4)	/* 0=off, 5=max */
++#define LTV_SUPPLY_CURRENT(x)	(((x) & 0x0007) << 0)	/* 0=off, 5=max */
++
++/* Bit definitions for LTV_PWRCTL2 */
++#define LTV_VCOML_ENABLE	(1 << 13)
++#define LTV_VCOML_VOLTAGE(x)	(((x) & 0x001f) << 8)	/* 0=1V, 31=-1V */
++#define LTV_VCOMH_VOLTAGE(x)	(((x) & 0x001f) << 0)	/* 0=3V, 31=4.5V */
++
++#endif /* __LTV350QV_H */
+Index: linux-2.6.22.1/drivers/video/backlight/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/video/backlight/Makefile	(revision 1)
++++ linux-2.6.22.1/drivers/video/backlight/Makefile	(arbetskopia)
+@@ -1,9 +1,12 @@
+ # Backlight & LCD drivers
+ 
+ obj-$(CONFIG_LCD_CLASS_DEVICE)     += lcd.o
++obj-$(CONFIG_LCD_LTV350QV)	+= ltv350qv.o
++
+ obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
+ obj-$(CONFIG_BACKLIGHT_CORGI)	+= corgi_bl.o
+ obj-$(CONFIG_BACKLIGHT_HP680)	+= hp680_bl.o
+ obj-$(CONFIG_BACKLIGHT_LOCOMO)	+= locomolcd.o
+ obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
+ obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
++obj-$(CONFIG_BACKLIGHT_KB920x)	+= kb920x_bl.o
+Index: linux-2.6.22.1/drivers/video/backlight/kb920x_bl.c
+===================================================================
+--- linux-2.6.22.1/drivers/video/backlight/kb920x_bl.c	(revision 0)
++++ linux-2.6.22.1/drivers/video/backlight/kb920x_bl.c	(revision 0)
+@@ -0,0 +1,164 @@
++/*
++ * Backlight Driver for KB9202
++ *
++ * Copyright (c) 2006 KwikByte
++ *
++ * Based on Sharp's Corgi Backlight Driver
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
 +#include <linux/platform_device.h>
-+#include <linux/list.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/list.h>
 +#include <linux/spinlock.h>
-+#include <linux/atmel-ssc.h>
++#include <linux/fb.h>
++#include <linux/backlight.h>
 +
-+/* Serialize access to ssc_list and user count */
-+static DEFINE_SPINLOCK(user_lock);
-+static LIST_HEAD(ssc_list);
++#include <asm/arch/gpio.h>
 +
-+struct ssc_device *ssc_request(unsigned int ssc_num)
++/* The backlight is on(1)/off(0) */
++#define	KB9202_DEFAULT_INTENSITY	1
++#define	KB9202_MAX_INTENSITY		1
++
++static int kb9202bl_suspended;
++static int current_intensity = 0;
++static DEFINE_SPINLOCK(bl_lock);
++
++static int kb9202bl_set_intensity(struct backlight_device *bd)
 +{
-+	int ssc_valid = 0;
-+	struct ssc_device *ssc;
++	unsigned long flags;
++	int intensity = bd->props.brightness;
 +
-+	spin_lock(&user_lock);
-+	list_for_each_entry(ssc, &ssc_list, list) {
-+		if (ssc->pdev->id == ssc_num) {
-+			ssc_valid = 1;
-+			break;
-+		}
-+	}
++	if (bd->props.power != FB_BLANK_UNBLANK)
++		intensity = 0;
++	if (bd->props.fb_blank != FB_BLANK_UNBLANK)
++		intensity = 0;
++	if (kb9202bl_suspended)
++		intensity = 0;
 +
-+	if (!ssc_valid) {
-+		spin_unlock(&user_lock);
-+		dev_dbg(&ssc->pdev->dev, "could not find requested device\n");
-+		return ERR_PTR(-ENODEV);
-+	}
++	if ((!current_intensity) && (bd->props.power == FB_BLANK_UNBLANK))
++		intensity = 1;
 +
-+	if (ssc->user) {
-+		spin_unlock(&user_lock);
-+		dev_dbg(&ssc->pdev->dev, "module busy\n");
-+		return ERR_PTR(-EBUSY);
-+	}
-+	ssc->user++;
-+	spin_unlock(&user_lock);
++	spin_lock_irqsave(&bl_lock, flags);
++	if (intensity)
++		gpio_set_value(AT91_PIN_PC23, 1);
++	else
++		gpio_set_value(AT91_PIN_PC23, 0);
++	spin_unlock_irqrestore(&bl_lock, flags);
 +
-+	clk_enable(ssc->clk);
-+
-+	return ssc;
-+}
-+EXPORT_SYMBOL(ssc_request);
-+
-+void ssc_free(struct ssc_device *ssc)
-+{
-+	spin_lock(&user_lock);
-+	if (ssc->user) {
-+		ssc->user--;
-+		clk_disable(ssc->clk);
-+	} else {
-+		dev_dbg(&ssc->pdev->dev, "device already free\n");
-+	}
-+	spin_unlock(&user_lock);
-+}
-+EXPORT_SYMBOL(ssc_free);
-+
-+static int __init ssc_probe(struct platform_device *pdev)
-+{
-+	int retval = 0;
-+	struct resource *regs;
-+	struct ssc_device *ssc;
-+
-+	ssc = kzalloc(sizeof(struct ssc_device), GFP_KERNEL);
-+	if (!ssc) {
-+		dev_dbg(&pdev->dev, "out of memory\n");
-+		retval = -ENOMEM;
-+		goto out;
-+	}
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs) {
-+		dev_dbg(&pdev->dev, "no mmio resource defined\n");
-+		retval = -ENXIO;
-+		goto out_free;
-+	}
-+
-+	ssc->clk = clk_get(&pdev->dev, "pclk");
-+	if (IS_ERR(ssc->clk)) {
-+		dev_dbg(&pdev->dev, "no pclk clock defined\n");
-+		retval = -ENXIO;
-+		goto out_free;
-+	}
-+
-+	ssc->pdev = pdev;
-+	ssc->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+	if (!ssc->regs) {
-+		dev_dbg(&pdev->dev, "ioremap failed\n");
-+		retval = -EINVAL;
-+		goto out_clk;
-+	}
-+
-+	/* disable all interrupts */
-+	clk_enable(ssc->clk);
-+	ssc_writel(ssc->regs, IDR, ~0UL);
-+	ssc_readl(ssc->regs, SR);
-+	clk_disable(ssc->clk);
-+
-+	ssc->irq = platform_get_irq(pdev, 0);
-+	if (!ssc->irq) {
-+		dev_dbg(&pdev->dev, "could not get irq\n");
-+		retval = -ENXIO;
-+		goto out_unmap;
-+	}
-+
-+	spin_lock(&user_lock);
-+	list_add_tail(&ssc->list, &ssc_list);
-+	spin_unlock(&user_lock);
-+
-+	platform_set_drvdata(pdev, ssc);
-+
-+	dev_info(&pdev->dev, "Atmel SSC device at 0x%p (irq %d)\n",
-+			ssc->regs, ssc->irq);
-+
-+	goto out;
-+
-+out_unmap:
-+	iounmap(ssc->regs);
-+out_clk:
-+	clk_put(ssc->clk);
-+out_free:
-+	kfree(ssc);
-+out:
-+	return retval;
-+}
-+
-+static int __devexit ssc_remove(struct platform_device *pdev)
-+{
-+	struct ssc_device *ssc = platform_get_drvdata(pdev);
-+
-+	spin_lock(&user_lock);
-+	iounmap(ssc->regs);
-+	clk_put(ssc->clk);
-+	list_del(&ssc->list);
-+	kfree(ssc);
-+	spin_unlock(&user_lock);
++	current_intensity = intensity;
 +
 +	return 0;
 +}
 +
-+static struct platform_driver ssc_driver = {
-+	.remove		= __devexit_p(ssc_remove),
++static int kb9202bl_get_intensity(struct backlight_device *bd)
++{
++	return current_intensity;
++}
++
++static struct backlight_ops kb9202bl_ops = {
++	.get_brightness	= kb9202bl_get_intensity,
++	.update_status	= kb9202bl_set_intensity,
++};
++
++static int __init kb9202bl_probe(struct platform_device *pdev)
++{
++	struct backlight_device *bd;
++
++	bd = backlight_device_register ("kb9202-bl", &pdev->dev, NULL, &kb9202bl_ops);
++	if (IS_ERR(bd))
++		return PTR_ERR(bd);
++
++	platform_set_drvdata(pdev, bd);
++
++	bd->props.max_brightness = KB9202_MAX_INTENSITY;
++	bd->props.brightness = KB9202_DEFAULT_INTENSITY;
++	(void) kb9202bl_set_intensity(bd);
++
++	return 0;
++}
++
++static int kb9202bl_remove(struct platform_device *pdev)
++{
++	struct backlight_device *bd = platform_get_drvdata(pdev);
++
++	bd->props.brightness = 0;
++	bd->props.power = 0;
++	(void) kb9202bl_set_intensity(bd);
++
++	backlight_device_unregister(bd);
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++static int kb9202bl_suspend(struct platform_device *dev, pm_message_t state)
++{
++	struct backlight_device *bd = platform_get_drvdata(pdev);
++
++	kb9202bl_suspended = 1;
++	(void) kb9202bl_set_intensity(bd);
++	return 0;
++}
++
++static int kb9202bl_resume(struct platform_device *dev)
++{
++	struct backlight_device *bd = platform_get_drvdata(pdev);
++
++	kb9202bl_suspended = 0;
++	(void) kb9202bl_set_intensity(bd);
++	return 0;
++}
++#else
++#define kb9202bl_suspend	NULL
++#define kb9202bl_resume		NULL
++#endif
++
++static struct platform_driver kb9202bl_driver = {
++	.probe		= kb9202bl_probe,
++	.remove		= kb9202bl_remove,
++	.suspend	= kb9202bl_suspend,
++	.resume		= kb9202bl_resume,
 +	.driver		= {
-+		.name		= "ssc",
++		.name	= "kb9202-bl",
++		.owner	= THIS_MODULE,
 +	},
 +};
 +
-+static int __init ssc_init(void)
-+{
-+	return platform_driver_probe(&ssc_driver, ssc_probe);
-+}
-+module_init(ssc_init);
++static struct platform_device *kb9202bl_device;
 +
-+static void __exit ssc_exit(void)
++static int __init kb9202bl_init(void)
 +{
-+	platform_driver_unregister(&ssc_driver);
-+}
-+module_exit(ssc_exit);
++	int ret;
 +
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("SSC driver for Atmel AVR32 and AT91");
++	ret = platform_driver_register(&kb9202bl_driver);
++	if (!ret) {
++		kb9202bl_device = platform_device_alloc("kb9202-bl", -1);
++		if (!kb9202bl_device)
++			return -ENOMEM;
++
++		ret = platform_device_add(kb9202bl_device);
++		if (ret) {
++			platform_device_put(kb9202bl_device);
++			platform_driver_unregister(&kb9202bl_driver);
++		}
++	}
++	return ret;
++}
++
++static void __exit kb9202bl_exit(void)
++{
++	platform_device_unregister(kb9202bl_device);
++	platform_driver_unregister(&kb9202bl_driver);
++}
++
++module_init(kb9202bl_init);
++module_exit(kb9202bl_exit);
++
++MODULE_AUTHOR("KwikByte <kb9200_dev@kwikbyte.com>");
++MODULE_DESCRIPTION("KB9202 Backlight Driver");
 +MODULE_LICENSE("GPL");
-diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
-index e23082f..1de1716 100644
---- a/drivers/mmc/host/Kconfig
-+++ b/drivers/mmc/host/Kconfig
-@@ -74,6 +74,16 @@ config MMC_AT91
+Index: linux-2.6.22.1/drivers/mmc/host/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/mmc/host/Kconfig	(revision 1)
++++ linux-2.6.22.1/drivers/mmc/host/Kconfig	(arbetskopia)
+@@ -74,6 +74,16 @@
  
  	  If unsure, say N.
  
@@ -6356,22 +16745,106 @@ index e23082f..1de1716 100644
  config MMC_IMX
  	tristate "Motorola i.MX Multimedia Card Interface support"
  	depends on ARCH_IMX
-diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
-index 6685f64..4b8e6e2 100644
---- a/drivers/mmc/host/Makefile
-+++ b/drivers/mmc/host/Makefile
-@@ -14,5 +14,6 @@ obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
- obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
- obj-$(CONFIG_MMC_OMAP)		+= omap.o
- obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
-+obj-$(CONFIG_MMC_ATMELMCI)	+= atmel-mci.o
- obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
+Index: linux-2.6.22.1/drivers/mmc/host/at91_mci.c
+===================================================================
+--- linux-2.6.22.1/drivers/mmc/host/at91_mci.c	(revision 1)
++++ linux-2.6.22.1/drivers/mmc/host/at91_mci.c	(arbetskopia)
+@@ -85,7 +85,7 @@
  
-diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
-new file mode 100644
-index 0000000..74d343f
---- /dev/null
-+++ b/drivers/mmc/host/atmel-mci.c
+ #define AT91_MCI_ERRORS	(AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE	\
+ 		| AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE		\
+-		| AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)			
++		| AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)
+ 
+ #define at91_mci_read(host, reg)	__raw_readl((host)->baseaddr + (reg))
+ #define at91_mci_write(host, reg, val)	__raw_writel((val), (host)->baseaddr + (reg))
+@@ -560,9 +560,7 @@
+ 	pr_debug("Status = %08X [%08X %08X %08X %08X]\n",
+ 		 status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
+ 
+-	if (status & (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE |
+-			AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE |
+-			AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)) {
++	if (status & (AT91_MCI_ERRORS)) {
+ 		if ((status & AT91_MCI_RCRCE) && !(mmc_resp_type(cmd) & MMC_RSP_CRC)) {
+ 			cmd->error = MMC_ERR_NONE;
+ 		}
+@@ -663,15 +661,15 @@
+ 
+ 	int_status = at91_mci_read(host, AT91_MCI_SR);
+ 	int_mask = at91_mci_read(host, AT91_MCI_IMR);
+-	
++
+ 	pr_debug("MCI irq: status = %08X, %08X, %08X\n", int_status, int_mask,
+ 		int_status & int_mask);
+-	
++
+ 	int_status = int_status & int_mask;
+ 
+ 	if (int_status & AT91_MCI_ERRORS) {
+ 		completed = 1;
+-		
++
+ 		if (int_status & AT91_MCI_UNRE)
+ 			pr_debug("MMC: Underrun error\n");
+ 		if (int_status & AT91_MCI_OVRE)
+@@ -819,7 +817,7 @@
+ 	mmc->f_min = 375000;
+ 	mmc->f_max = 25000000;
+ 	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+-	mmc->caps = MMC_CAP_BYTEBLOCK;
++	mmc->caps = MMC_CAP_BYTEBLOCK | MMC_CAP_MULTIWRITE;
+ 
+ 	mmc->max_blk_size = 4095;
+ 	mmc->max_blk_count = mmc->max_req_size;
+@@ -893,6 +891,8 @@
+ 
+ 	mmc_add_host(mmc);
+ 
++	device_init_wakeup(&pdev->dev, 1);
++
+ 	/*
+ 	 * monitor card insertion/removal if we can
+ 	 */
+@@ -922,6 +922,8 @@
+ 
+ 	host = mmc_priv(mmc);
+ 
++	device_init_wakeup(&pdev->dev, 0);
++
+ 	if (host->present != -1) {
+ 		free_irq(host->board->det_pin, host);
+ 		cancel_delayed_work(&host->mmc->detect);
+@@ -949,8 +951,12 @@
+ static int at91_mci_suspend(struct platform_device *pdev, pm_message_t state)
+ {
+ 	struct mmc_host *mmc = platform_get_drvdata(pdev);
++	struct at91mci_host *host = mmc_priv(mmc);
+ 	int ret = 0;
+ 
++	if (device_may_wakeup(&pdev->dev))
++		enable_irq_wake(host->board->det_pin);
++
+ 	if (mmc)
+ 		ret = mmc_suspend_host(mmc, state);
+ 
+@@ -960,8 +966,12 @@
+ static int at91_mci_resume(struct platform_device *pdev)
+ {
+ 	struct mmc_host *mmc = platform_get_drvdata(pdev);
++	struct at91mci_host *host = mmc_priv(mmc);
+ 	int ret = 0;
+ 
++	if (device_may_wakeup(&pdev->dev))
++		disable_irq_wake(host->board->det_pin);
++
+ 	if (mmc)
+ 		ret = mmc_resume_host(mmc);
+ 
+Index: linux-2.6.22.1/drivers/mmc/host/atmel-mci.c
+===================================================================
+--- linux-2.6.22.1/drivers/mmc/host/atmel-mci.c	(revision 0)
++++ linux-2.6.22.1/drivers/mmc/host/atmel-mci.c	(revision 0)
 @@ -0,0 +1,1217 @@
 +/*
 + * Atmel MultiMedia Card Interface driver
@@ -7590,11 +18063,10 @@ index 0000000..74d343f
 +
 +MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
 +MODULE_LICENSE("GPL");
-diff --git a/drivers/mmc/host/atmel-mci.h b/drivers/mmc/host/atmel-mci.h
-new file mode 100644
-index 0000000..60d15c4
---- /dev/null
-+++ b/drivers/mmc/host/atmel-mci.h
+Index: linux-2.6.22.1/drivers/mmc/host/atmel-mci.h
+===================================================================
+--- linux-2.6.22.1/drivers/mmc/host/atmel-mci.h	(revision 0)
++++ linux-2.6.22.1/drivers/mmc/host/atmel-mci.h	(revision 0)
 @@ -0,0 +1,192 @@
 +/*
 + * Atmel MultiMedia Card Interface driver
@@ -7788,951 +18260,230 @@ index 0000000..60d15c4
 +	__raw_writel((value), (port)->regs + MCI_##reg)
 +
 +#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
-diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
-index 2f19fa7..94304ca 100644
---- a/drivers/mtd/chips/cfi_cmdset_0001.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
-@@ -50,6 +50,7 @@
- #define I82802AC	0x00ac
- #define MANUFACTURER_ST         0x0020
- #define M50LPW080       0x002F
-+#define AT49BV640D	0x02de
+Index: linux-2.6.22.1/drivers/mmc/host/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/mmc/host/Makefile	(revision 1)
++++ linux-2.6.22.1/drivers/mmc/host/Makefile	(arbetskopia)
+@@ -14,5 +14,6 @@
+ obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
+ obj-$(CONFIG_MMC_OMAP)		+= omap.o
+ obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
++obj-$(CONFIG_MMC_ATMELMCI)	+= atmel-mci.o
+ obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
  
- static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -156,6 +157,47 @@ static void cfi_tell_features(struct cfi_pri_intelext *extp)
- }
- #endif
+Index: linux-2.6.22.1/drivers/misc/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/misc/Kconfig	(revision 1)
++++ linux-2.6.22.1/drivers/misc/Kconfig	(arbetskopia)
+@@ -187,5 +187,15 @@
  
-+/* Atmel chips don't use the same PRI format as Intel chips */
-+static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
+ 	  If you are not sure, say Y here.
+ 
++config ATMEL_SSC
++	tristate "Device driver for Atmel SSC peripheral"
++	depends on AVR32 || ARCH_AT91
++	---help---
++	  This option enables device driver support for Atmel Syncronized
++	  Serial Communication peripheral (SSC).
+ 
++	  The SSC peripheral supports a wide variety of serial frame based
++	  communications, i.e. I2S, SPI, etc.
++
++	  If unsure, say N.
+ endmenu
+Index: linux-2.6.22.1/drivers/misc/atmel-ssc.c
+===================================================================
+--- linux-2.6.22.1/drivers/misc/atmel-ssc.c	(revision 0)
++++ linux-2.6.22.1/drivers/misc/atmel-ssc.c	(revision 0)
+@@ -0,0 +1,174 @@
++/*
++ * Atmel SSC driver
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/list.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/list.h>
++#include <linux/spinlock.h>
++#include <linux/atmel-ssc.h>
++
++/* Serialize access to ssc_list and user count */
++static DEFINE_SPINLOCK(user_lock);
++static LIST_HEAD(ssc_list);
++
++struct ssc_device *ssc_request(unsigned int ssc_num)
 +{
-+	struct map_info *map = mtd->priv;
-+	struct cfi_private *cfi = map->fldrv_priv;
-+	struct cfi_pri_intelext *extp = cfi->cmdset_priv;
-+	struct cfi_pri_atmel atmel_pri;
-+	uint32_t features = 0;
++	int ssc_valid = 0;
++	struct ssc_device *ssc;
 +
-+	/* Reverse byteswapping */
-+	extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport);
-+	extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask);
-+	extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr);
-+
-+	memcpy(&atmel_pri, extp, sizeof(atmel_pri));
-+	memset((char *)extp + 5, 0, sizeof(*extp) - 5);
-+
-+	printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features);
-+
-+	if (atmel_pri.Features & 0x01) /* chip erase supported */
-+		features |= (1<<0);
-+	if (atmel_pri.Features & 0x02) /* erase suspend supported */
-+		features |= (1<<1);
-+	if (atmel_pri.Features & 0x04) /* program suspend supported */
-+		features |= (1<<2);
-+	if (atmel_pri.Features & 0x08) /* simultaneous operations supported */
-+		features |= (1<<9);
-+	if (atmel_pri.Features & 0x20) /* page mode read supported */
-+		features |= (1<<7);
-+	if (atmel_pri.Features & 0x40) /* queued erase supported */
-+		features |= (1<<4);
-+	if (atmel_pri.Features & 0x80) /* Protection bits supported */
-+		features |= (1<<6);
-+
-+	extp->FeatureSupport = features;
-+
-+	/* burst write mode not supported */
-+	cfi->cfiq->BufWriteTimeoutTyp = 0;
-+	cfi->cfiq->BufWriteTimeoutMax = 0;
-+}
-+
- #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
- /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
- static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
-@@ -233,6 +275,7 @@ static void fixup_use_powerup_lock(struct mtd_info *mtd, void *param)
- }
- 
- static struct cfi_fixup cfi_fixup_table[] = {
-+	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
- 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
- #endif
-diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
-index 1f64458..205977b 100644
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -185,6 +185,10 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
- 		extp->TopBottom = 2;
- 	else
- 		extp->TopBottom = 3;
-+
-+	/* burst write mode not supported */
-+	cfi->cfiq->BufWriteTimeoutTyp = 0;
-+	cfi->cfiq->BufWriteTimeoutMax = 0;
- }
- 
- static void fixup_use_secsi(struct mtd_info *mtd, void *param)
-@@ -217,6 +221,7 @@ static void fixup_use_atmel_lock(struct mtd_info *mtd, void *param)
- }
- 
- static struct cfi_fixup cfi_fixup_table[] = {
-+	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef AMD_BOOTLOC_BUG
- 	{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
- #endif
-@@ -229,7 +234,6 @@ static struct cfi_fixup cfi_fixup_table[] = {
- #if !FORCE_WORD_WRITE
- 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
- #endif
--	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- 	{ 0, 0, NULL, NULL }
- };
- static struct cfi_fixup jedec_fixup_table[] = {
-diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
-index b49375a..b9cb56a 100644
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -191,7 +191,7 @@ config MII
- config MACB
- 	tristate "Atmel MACB support"
- 	depends on NET_ETHERNET && (AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263)
--	select MII
-+	select PHYLIB
- 	help
- 	  The Atmel MACB ethernet interface is found on many AT32 and AT91
- 	  parts. Say Y to include support for the MACB chip.
-diff --git a/drivers/net/macb.c b/drivers/net/macb.c
-index 0e04f7a..c20a585 100644
---- a/drivers/net/macb.c
-+++ b/drivers/net/macb.c
-@@ -17,13 +17,14 @@
- #include <linux/init.h>
- #include <linux/netdevice.h>
- #include <linux/etherdevice.h>
--#include <linux/mii.h>
--#include <linux/mutex.h>
- #include <linux/dma-mapping.h>
--#include <linux/ethtool.h>
- #include <linux/platform_device.h>
-+#include <linux/phy.h>
- 
- #include <asm/arch/board.h>
-+#if defined(CONFIG_ARCH_AT91)
-+#include <asm/arch/cpu.h>
-+#endif
- 
- #include "macb.h"
- 
-@@ -85,172 +86,202 @@ static void __init macb_get_hwaddr(struct macb *bp)
- 		memcpy(bp->dev->dev_addr, addr, sizeof(addr));
- }
- 
--static void macb_enable_mdio(struct macb *bp)
-+static int macb_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
- {
--	unsigned long flags;
--	u32 reg;
--
--	spin_lock_irqsave(&bp->lock, flags);
--	reg = macb_readl(bp, NCR);
--	reg |= MACB_BIT(MPE);
--	macb_writel(bp, NCR, reg);
--	macb_writel(bp, IER, MACB_BIT(MFD));
--	spin_unlock_irqrestore(&bp->lock, flags);
--}
--
--static void macb_disable_mdio(struct macb *bp)
--{
--	unsigned long flags;
--	u32 reg;
--
--	spin_lock_irqsave(&bp->lock, flags);
--	reg = macb_readl(bp, NCR);
--	reg &= ~MACB_BIT(MPE);
--	macb_writel(bp, NCR, reg);
--	macb_writel(bp, IDR, MACB_BIT(MFD));
--	spin_unlock_irqrestore(&bp->lock, flags);
--}
--
--static int macb_mdio_read(struct net_device *dev, int phy_id, int location)
--{
--	struct macb *bp = netdev_priv(dev);
-+	struct macb *bp = bus->priv;
- 	int value;
- 
--	mutex_lock(&bp->mdio_mutex);
--
--	macb_enable_mdio(bp);
- 	macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
- 			      | MACB_BF(RW, MACB_MAN_READ)
--			      | MACB_BF(PHYA, phy_id)
--			      | MACB_BF(REGA, location)
-+			      | MACB_BF(PHYA, mii_id)
-+			      | MACB_BF(REGA, regnum)
- 			      | MACB_BF(CODE, MACB_MAN_CODE)));
- 
--	wait_for_completion(&bp->mdio_complete);
-+	/* wait for end of transfer */
-+	while (!MACB_BFEXT(IDLE, macb_readl(bp, NSR)))
-+		cpu_relax();
- 
- 	value = MACB_BFEXT(DATA, macb_readl(bp, MAN));
--	macb_disable_mdio(bp);
--	mutex_unlock(&bp->mdio_mutex);
- 
- 	return value;
- }
- 
--static void macb_mdio_write(struct net_device *dev, int phy_id,
--			    int location, int val)
-+static int macb_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
-+			   u16 value)
- {
--	struct macb *bp = netdev_priv(dev);
--
--	dev_dbg(&bp->pdev->dev, "mdio_write %02x:%02x <- %04x\n",
--		phy_id, location, val);
--
--	mutex_lock(&bp->mdio_mutex);
--	macb_enable_mdio(bp);
-+	struct macb *bp = bus->priv;
- 
- 	macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
- 			      | MACB_BF(RW, MACB_MAN_WRITE)
--			      | MACB_BF(PHYA, phy_id)
--			      | MACB_BF(REGA, location)
-+			      | MACB_BF(PHYA, mii_id)
-+			      | MACB_BF(REGA, regnum)
- 			      | MACB_BF(CODE, MACB_MAN_CODE)
--			      | MACB_BF(DATA, val)));
-+			      | MACB_BF(DATA, value)));
- 
--	wait_for_completion(&bp->mdio_complete);
-+	/* wait for end of transfer */
-+	while (!MACB_BFEXT(IDLE, macb_readl(bp, NSR)))
-+		cpu_relax();
- 
--	macb_disable_mdio(bp);
--	mutex_unlock(&bp->mdio_mutex);
-+	return 0;
- }
- 
--static int macb_phy_probe(struct macb *bp)
-+static int macb_mdio_reset(struct mii_bus *bus)
- {
--	int phy_address;
--	u16 phyid1, phyid2;
-+	return 0;
-+}
- 
--	for (phy_address = 0; phy_address < 32; phy_address++) {
--		phyid1 = macb_mdio_read(bp->dev, phy_address, MII_PHYSID1);
--		phyid2 = macb_mdio_read(bp->dev, phy_address, MII_PHYSID2);
-+static void macb_handle_link_change(struct net_device *dev)
-+{
-+	struct macb *bp = netdev_priv(dev);
-+	struct phy_device *phydev = bp->phy_dev;
-+	unsigned long flags;
- 
--		if (phyid1 != 0xffff && phyid1 != 0x0000
--		    && phyid2 != 0xffff && phyid2 != 0x0000)
--			break;
-+	int status_change = 0;
-+
-+	spin_lock_irqsave(&bp->lock, flags);
-+
-+	if (phydev->link) {
-+		if ((bp->speed != phydev->speed) ||
-+		    (bp->duplex != phydev->duplex)) {
-+			u32 reg;
-+
-+			reg = macb_readl(bp, NCFGR);
-+			reg &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
-+
-+			if (phydev->duplex)
-+				reg |= MACB_BIT(FD);
-+			if (phydev->speed)
-+				reg |= MACB_BIT(SPD);
-+
-+			macb_writel(bp, NCFGR, reg);
-+
-+			bp->speed = phydev->speed;
-+			bp->duplex = phydev->duplex;
-+			status_change = 1;
-+		}
- 	}
- 
--	if (phy_address == 32)
--		return -ENODEV;
-+	if (phydev->link != bp->link) {
-+		if (phydev->link)
-+			netif_schedule(dev);
-+		else {
-+			bp->speed = 0;
-+			bp->duplex = -1;
-+		}
-+		bp->link = phydev->link;
- 
--	dev_info(&bp->pdev->dev,
--		 "detected PHY at address %d (ID %04x:%04x)\n",
--		 phy_address, phyid1, phyid2);
-+		status_change = 1;
-+	}
- 
--	bp->mii.phy_id = phy_address;
--	return 0;
-+	spin_unlock_irqrestore(&bp->lock, flags);
-+
-+	if (status_change) {
-+		if (phydev->link)
-+			printk(KERN_INFO "%s: link up (%d/%s)\n",
-+			       dev->name, phydev->speed,
-+			       DUPLEX_FULL == phydev->duplex ? "Full":"Half");
-+		else
-+			printk(KERN_INFO "%s: link down\n", dev->name);
-+	}
- }
- 
--static void macb_set_media(struct macb *bp, int media)
-+/* based on au1000_eth. c*/
-+static int macb_mii_probe(struct net_device *dev)
- {
--	u32 reg;
-+	struct macb *bp = netdev_priv(dev);
-+	struct phy_device *phydev = NULL;
-+	struct eth_platform_data *pdata;
-+	int phy_addr;
- 
--	spin_lock_irq(&bp->lock);
--	reg = macb_readl(bp, NCFGR);
--	reg &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
--	if (media & (ADVERTISE_100HALF | ADVERTISE_100FULL))
--		reg |= MACB_BIT(SPD);
--	if (media & ADVERTISE_FULL)
--		reg |= MACB_BIT(FD);
--	macb_writel(bp, NCFGR, reg);
--	spin_unlock_irq(&bp->lock);
-+	/* find the first phy */
-+	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
-+		if (bp->mii_bus.phy_map[phy_addr]) {
-+			phydev = bp->mii_bus.phy_map[phy_addr];
++	spin_lock(&user_lock);
++	list_for_each_entry(ssc, &ssc_list, list) {
++		if (ssc->pdev->id == ssc_num) {
++			ssc_valid = 1;
 +			break;
 +		}
 +	}
 +
-+	if (!phydev) {
-+		printk (KERN_ERR "%s: no PHY found\n", dev->name);
-+		return -1;
++	if (!ssc_valid) {
++		spin_unlock(&user_lock);
++		dev_dbg(&ssc->pdev->dev, "could not find requested device\n");
++		return ERR_PTR(-ENODEV);
 +	}
 +
-+	pdata = bp->pdev->dev.platform_data;
-+	/* TODO : add pin_irq */
++	if (ssc->user) {
++		spin_unlock(&user_lock);
++		dev_dbg(&ssc->pdev->dev, "module busy\n");
++		return ERR_PTR(-EBUSY);
++	}
++	ssc->user++;
++	spin_unlock(&user_lock);
 +
-+	/* attach the mac to the phy */
-+	if (pdata && pdata->is_rmii) {
-+		phydev = phy_connect(dev, phydev->dev.bus_id,
-+			&macb_handle_link_change, 0, PHY_INTERFACE_MODE_RMII);
++	clk_enable(ssc->clk);
++
++	return ssc;
++}
++EXPORT_SYMBOL(ssc_request);
++
++void ssc_free(struct ssc_device *ssc)
++{
++	spin_lock(&user_lock);
++	if (ssc->user) {
++		ssc->user--;
++		clk_disable(ssc->clk);
 +	} else {
-+		phydev = phy_connect(dev, phydev->dev.bus_id,
-+			&macb_handle_link_change, 0, PHY_INTERFACE_MODE_MII);
++		dev_dbg(&ssc->pdev->dev, "device already free\n");
++	}
++	spin_unlock(&user_lock);
++}
++EXPORT_SYMBOL(ssc_free);
++
++static int __init ssc_probe(struct platform_device *pdev)
++{
++	int retval = 0;
++	struct resource *regs;
++	struct ssc_device *ssc;
++
++	ssc = kzalloc(sizeof(struct ssc_device), GFP_KERNEL);
++	if (!ssc) {
++		dev_dbg(&pdev->dev, "out of memory\n");
++		retval = -ENOMEM;
++		goto out;
 +	}
 +
-+	if (IS_ERR(phydev)) {
-+		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-+		return PTR_ERR(phydev);
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs) {
++		dev_dbg(&pdev->dev, "no mmio resource defined\n");
++		retval = -ENXIO;
++		goto out_free;
 +	}
 +
-+	/* mask with MAC supported features */
-+	phydev->supported &= PHY_BASIC_FEATURES;
-+
-+	phydev->advertising = phydev->supported;
-+
-+	bp->link = 0;
-+	bp->speed = 0;
-+	bp->duplex = -1;
-+	bp->phy_dev = phydev;
-+
-+	return 0;
- }
- 
--static void macb_check_media(struct macb *bp, int ok_to_print, int init_media)
-+static int macb_mii_init(struct macb *bp)
- {
--	struct mii_if_info *mii = &bp->mii;
--	unsigned int old_carrier, new_carrier;
--	int advertise, lpa, media, duplex;
-+	struct eth_platform_data *pdata;
-+	int err = -ENXIO, i;
- 
--	/* if forced media, go no further */
--	if (mii->force_media)
--		return;
-+	/* Enable managment port */
-+	macb_writel(bp, NCR, MACB_BIT(MPE));
- 
--	/* check current and old link status */
--	old_carrier = netif_carrier_ok(mii->dev) ? 1 : 0;
--	new_carrier = (unsigned int) mii_link_ok(mii);
-+	bp->mii_bus.name = "MACB_mii_bus",
-+	bp->mii_bus.read = &macb_mdio_read,
-+	bp->mii_bus.write = &macb_mdio_write,
-+	bp->mii_bus.reset = &macb_mdio_reset,
-+	bp->mii_bus.id = bp->pdev->id,
-+	bp->mii_bus.priv = bp,
-+	bp->mii_bus.dev = &bp->dev->dev;
-+	pdata = bp->pdev->dev.platform_data;
- 
--	/* if carrier state did not change, assume nothing else did */
--	if (!init_media && old_carrier == new_carrier)
--		return;
-+	if (pdata)
-+		bp->mii_bus.phy_mask = pdata->phy_mask;
- 
--	/* no carrier, nothing much to do */
--	if (!new_carrier) {
--		netif_carrier_off(mii->dev);
--		printk(KERN_INFO "%s: link down\n", mii->dev->name);
--		return;
-+	bp->mii_bus.irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
-+	if (!bp->mii_bus.irq) {
-+		err = -ENOMEM;
-+		goto err_out;
- 	}
- 
--	/*
--	 * we have carrier, see who's on the other end
--	 */
--	netif_carrier_on(mii->dev);
-+	for (i = 0; i < PHY_MAX_ADDR; i++)
-+		bp->mii_bus.irq[i] = PHY_POLL;
- 
--	/* get MII advertise and LPA values */
--	if (!init_media && mii->advertising) {
--		advertise = mii->advertising;
--	} else {
--		advertise = mii->mdio_read(mii->dev, mii->phy_id, MII_ADVERTISE);
--		mii->advertising = advertise;
--	}
--	lpa = mii->mdio_read(mii->dev, mii->phy_id, MII_LPA);
-+	platform_set_drvdata(bp->dev, &bp->mii_bus);
- 
--	/* figure out media and duplex from advertise and LPA values */
--	media = mii_nway_result(lpa & advertise);
--	duplex = (media & ADVERTISE_FULL) ? 1 : 0;
-+	if (mdiobus_register(&bp->mii_bus))
-+		goto err_out_free_mdio_irq;
- 
--	if (ok_to_print)
--		printk(KERN_INFO "%s: link up, %sMbps, %s-duplex, lpa 0x%04X\n",
--		       mii->dev->name,
--		       media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ? "100" : "10",
--		       duplex ? "full" : "half", lpa);
-+	if (macb_mii_probe(bp->dev) != 0) {
-+		goto err_out_unregister_bus;
++	ssc->clk = clk_get(&pdev->dev, "pclk");
++	if (IS_ERR(ssc->clk)) {
++		dev_dbg(&pdev->dev, "no pclk clock defined\n");
++		retval = -ENXIO;
++		goto out_free;
 +	}
- 
--	mii->full_duplex = duplex;
-+	return 0;
- 
--	/* Let the MAC know about the new link state */
--	macb_set_media(bp, media);
-+err_out_unregister_bus:
-+	mdiobus_unregister(&bp->mii_bus);
-+err_out_free_mdio_irq:
-+	kfree(bp->mii_bus.irq);
-+err_out:
-+	return err;
- }
- 
- static void macb_update_stats(struct macb *bp)
-@@ -265,16 +296,6 @@ static void macb_update_stats(struct macb *bp)
- 		*p += __raw_readl(reg);
- }
- 
--static void macb_periodic_task(struct work_struct *work)
--{
--	struct macb *bp = container_of(work, struct macb, periodic_task.work);
--
--	macb_update_stats(bp);
--	macb_check_media(bp, 1, 0);
--
--	schedule_delayed_work(&bp->periodic_task, HZ);
--}
--
- static void macb_tx(struct macb *bp)
- {
- 	unsigned int tail;
-@@ -519,9 +540,6 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
- 	spin_lock(&bp->lock);
- 
- 	while (status) {
--		if (status & MACB_BIT(MFD))
--			complete(&bp->mdio_complete);
--
- 		/* close possible race with dev_close */
- 		if (unlikely(!netif_running(dev))) {
- 			macb_writel(bp, IDR, ~0UL);
-@@ -535,7 +553,8 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
- 				 * until we have processed the buffers
- 				 */
- 				macb_writel(bp, IDR, MACB_RX_INT_FLAGS);
--				dev_dbg(&bp->pdev->dev, "scheduling RX softirq\n");
-+				dev_dbg(&bp->pdev->dev,
-+					"scheduling RX softirq\n");
- 				__netif_rx_schedule(dev);
- 			}
- 		}
-@@ -765,7 +784,7 @@ static void macb_init_hw(struct macb *bp)
- 	macb_writel(bp, TBQP, bp->tx_ring_dma);
- 
- 	/* Enable TX and RX */
--	macb_writel(bp, NCR, MACB_BIT(RE) | MACB_BIT(TE));
-+	macb_writel(bp, NCR, MACB_BIT(RE) | MACB_BIT(TE) | MACB_BIT(MPE));
- 
- 	/* Enable interrupts */
- 	macb_writel(bp, IER, (MACB_BIT(RCOMP)
-@@ -776,18 +795,126 @@ static void macb_init_hw(struct macb *bp)
- 			      | MACB_BIT(TCOMP)
- 			      | MACB_BIT(ISR_ROVR)
- 			      | MACB_BIT(HRESP)));
 +
- }
- 
--static void macb_init_phy(struct net_device *dev)
-+/*
-+ * The hash address register is 64 bits long and takes up two
-+ * locations in the memory map.  The least significant bits are stored
-+ * in EMAC_HSL and the most significant bits in EMAC_HSH.
-+ *
-+ * The unicast hash enable and the multicast hash enable bits in the
-+ * network configuration register enable the reception of hash matched
-+ * frames. The destination address is reduced to a 6 bit index into
-+ * the 64 bit hash register using the following hash function.  The
-+ * hash function is an exclusive or of every sixth bit of the
-+ * destination address.
-+ *
-+ * hi[5] = da[5] ^ da[11] ^ da[17] ^ da[23] ^ da[29] ^ da[35] ^ da[41] ^ da[47]
-+ * hi[4] = da[4] ^ da[10] ^ da[16] ^ da[22] ^ da[28] ^ da[34] ^ da[40] ^ da[46]
-+ * hi[3] = da[3] ^ da[09] ^ da[15] ^ da[21] ^ da[27] ^ da[33] ^ da[39] ^ da[45]
-+ * hi[2] = da[2] ^ da[08] ^ da[14] ^ da[20] ^ da[26] ^ da[32] ^ da[38] ^ da[44]
-+ * hi[1] = da[1] ^ da[07] ^ da[13] ^ da[19] ^ da[25] ^ da[31] ^ da[37] ^ da[43]
-+ * hi[0] = da[0] ^ da[06] ^ da[12] ^ da[18] ^ da[24] ^ da[30] ^ da[36] ^ da[42]
-+ *
-+ * da[0] represents the least significant bit of the first byte
-+ * received, that is, the multicast/unicast indicator, and da[47]
-+ * represents the most significant bit of the last byte received.  If
-+ * the hash index, hi[n], points to a bit that is set in the hash
-+ * register then the frame will be matched according to whether the
-+ * frame is multicast or unicast.  A multicast match will be signalled
-+ * if the multicast hash enable bit is set, da[0] is 1 and the hash
-+ * index points to a bit set in the hash register.  A unicast match
-+ * will be signalled if the unicast hash enable bit is set, da[0] is 0
-+ * and the hash index points to a bit set in the hash register.  To
-+ * receive all multicast frames, the hash register should be set with
-+ * all ones and the multicast hash enable bit should be set in the
-+ * network configuration register.
-+ */
++	ssc->pdev = pdev;
++	ssc->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!ssc->regs) {
++		dev_dbg(&pdev->dev, "ioremap failed\n");
++		retval = -EINVAL;
++		goto out_clk;
++	}
++
++	/* disable all interrupts */
++	clk_enable(ssc->clk);
++	ssc_writel(ssc->regs, IDR, ~0UL);
++	ssc_readl(ssc->regs, SR);
++	clk_disable(ssc->clk);
++
++	ssc->irq = platform_get_irq(pdev, 0);
++	if (!ssc->irq) {
++		dev_dbg(&pdev->dev, "could not get irq\n");
++		retval = -ENXIO;
++		goto out_unmap;
++	}
++
++	spin_lock(&user_lock);
++	list_add_tail(&ssc->list, &ssc_list);
++	spin_unlock(&user_lock);
++
++	platform_set_drvdata(pdev, ssc);
++
++	dev_info(&pdev->dev, "Atmel SSC device at 0x%p (irq %d)\n",
++			ssc->regs, ssc->irq);
++
++	goto out;
++
++out_unmap:
++	iounmap(ssc->regs);
++out_clk:
++	clk_put(ssc->clk);
++out_free:
++	kfree(ssc);
++out:
++	return retval;
++}
++
++static int __devexit ssc_remove(struct platform_device *pdev)
++{
++	struct ssc_device *ssc = platform_get_drvdata(pdev);
++
++	spin_lock(&user_lock);
++	iounmap(ssc->regs);
++	clk_put(ssc->clk);
++	list_del(&ssc->list);
++	kfree(ssc);
++	spin_unlock(&user_lock);
 +
-+static inline int hash_bit_value(int bitnr, __u8 *addr)
- {
-+	if (addr[bitnr / 8] & (1 << (bitnr % 8)))
-+		return 1;
 +	return 0;
 +}
 +
-+/*
-+ * Return the hash index value for the specified address.
-+ */
-+static int hash_get_index(__u8 *addr)
++static struct platform_driver ssc_driver = {
++	.remove		= __devexit_p(ssc_remove),
++	.driver		= {
++		.name		= "ssc",
++	},
++};
++
++static int __init ssc_init(void)
 +{
-+	int i, j, bitval;
-+	int hash_index = 0;
-+
-+	for (j = 0; j < 6; j++) {
-+		for (i = 0, bitval = 0; i < 8; i++)
-+			bitval ^= hash_bit_value(i*6 + j, addr);
-+
-+		hash_index |= (bitval << j);
-+	}
-+
-+	return hash_index;
++	return platform_driver_probe(&ssc_driver, ssc_probe);
 +}
++module_init(ssc_init);
 +
-+/*
-+ * Add multicast addresses to the internal multicast-hash table.
-+ */
-+static void macb_sethashtable(struct net_device *dev)
++static void __exit ssc_exit(void)
 +{
-+	struct dev_mc_list *curr;
-+	unsigned long mc_filter[2];
-+	unsigned int i, bitnr;
-+	struct macb *bp = netdev_priv(dev);
-+
-+	mc_filter[0] = mc_filter[1] = 0;
-+
-+	curr = dev->mc_list;
-+	for (i = 0; i < dev->mc_count; i++, curr = curr->next) {
-+		if (!curr) break;	/* unexpected end of list */
-+
-+		bitnr = hash_get_index(curr->dmi_addr);
-+		mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
-+	}
-+
-+	macb_writel(bp, HRB, mc_filter[0]);
-+	macb_writel(bp, HRT, mc_filter[1]);
++	platform_driver_unregister(&ssc_driver);
 +}
++module_exit(ssc_exit);
 +
-+/*
-+ * Enable/Disable promiscuous and multicast modes.
-+ */
-+static void macb_set_rx_mode(struct net_device *dev)
-+{
-+	unsigned long cfg;
- 	struct macb *bp = netdev_priv(dev);
- 
--	/* Set some reasonable default settings */
--	macb_mdio_write(dev, bp->mii.phy_id, MII_ADVERTISE,
--			ADVERTISE_CSMA | ADVERTISE_ALL);
--	macb_mdio_write(dev, bp->mii.phy_id, MII_BMCR,
--			(BMCR_SPEED100 | BMCR_ANENABLE
--			 | BMCR_ANRESTART | BMCR_FULLDPLX));
-+	cfg = macb_readl(bp, NCFGR);
-+
-+	if (dev->flags & IFF_PROMISC)
-+		/* Enable promiscuous mode */
-+		cfg |= MACB_BIT(CAF);
-+	else if (dev->flags & (~IFF_PROMISC))
-+		 /* Disable promiscuous mode */
-+		cfg &= ~MACB_BIT(CAF);
-+
-+	if (dev->flags & IFF_ALLMULTI) {
-+		/* Enable all multicast mode */
-+		macb_writel(bp, HRB, -1);
-+		macb_writel(bp, HRT, -1);
-+		cfg |= MACB_BIT(NCFGR_MTI);
-+	} else if (dev->mc_count > 0) {
-+		/* Enable specific multicasts */
-+		macb_sethashtable(dev);
-+		cfg |= MACB_BIT(NCFGR_MTI);
-+	} else if (dev->flags & (~IFF_ALLMULTI)) {
-+		/* Disable all multicast mode */
-+		macb_writel(bp, HRB, 0);
-+		macb_writel(bp, HRT, 0);
-+		cfg &= ~MACB_BIT(NCFGR_MTI);
-+	}
-+
-+	macb_writel(bp, NCFGR, cfg);
- }
- 
- static int macb_open(struct net_device *dev)
-@@ -797,6 +924,10 @@ static int macb_open(struct net_device *dev)
- 
- 	dev_dbg(&bp->pdev->dev, "open\n");
- 
-+	/* if the phy is not yet register, retry later*/
-+	if (!bp->phy_dev)
-+		return -EAGAIN;
-+
- 	if (!is_valid_ether_addr(dev->dev_addr))
- 		return -EADDRNOTAVAIL;
- 
-@@ -810,12 +941,11 @@ static int macb_open(struct net_device *dev)
- 
- 	macb_init_rings(bp);
- 	macb_init_hw(bp);
--	macb_init_phy(dev);
- 
--	macb_check_media(bp, 1, 1);
--	netif_start_queue(dev);
-+	/* schedule a link state check */
-+	phy_start(bp->phy_dev);
- 
--	schedule_delayed_work(&bp->periodic_task, HZ);
-+	netif_start_queue(dev);
- 
- 	return 0;
- }
-@@ -825,10 +955,11 @@ static int macb_close(struct net_device *dev)
- 	struct macb *bp = netdev_priv(dev);
- 	unsigned long flags;
- 
--	cancel_rearming_delayed_work(&bp->periodic_task);
--
- 	netif_stop_queue(dev);
- 
-+	if (bp->phy_dev)
-+		phy_stop(bp->phy_dev);
-+
- 	spin_lock_irqsave(&bp->lock, flags);
- 	macb_reset_hw(bp);
- 	netif_carrier_off(dev);
-@@ -845,6 +976,9 @@ static struct net_device_stats *macb_get_stats(struct net_device *dev)
- 	struct net_device_stats *nstat = &bp->stats;
- 	struct macb_stats *hwstat = &bp->hw_stats;
- 
-+	/* read stats from hardware */
-+	macb_update_stats(bp);
-+
- 	/* Convert HW stats into netdevice stats */
- 	nstat->rx_errors = (hwstat->rx_fcs_errors +
- 			    hwstat->rx_align_errors +
-@@ -882,18 +1016,27 @@ static struct net_device_stats *macb_get_stats(struct net_device *dev)
- static int macb_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
- {
- 	struct macb *bp = netdev_priv(dev);
-+	struct phy_device *phydev = bp->phy_dev;
- 
--	return mii_ethtool_gset(&bp->mii, cmd);
-+	if (!phydev)
-+		return -ENODEV;
-+
-+	return phy_ethtool_gset(phydev, cmd);
- }
- 
- static int macb_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
- {
- 	struct macb *bp = netdev_priv(dev);
-+	struct phy_device *phydev = bp->phy_dev;
- 
--	return mii_ethtool_sset(&bp->mii, cmd);
-+	if (!phydev)
-+		return -ENODEV;
-+
-+	return phy_ethtool_sset(phydev, cmd);
- }
- 
--static void macb_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
-+static void macb_get_drvinfo(struct net_device *dev,
-+			     struct ethtool_drvinfo *info)
- {
- 	struct macb *bp = netdev_priv(dev);
- 
-@@ -902,104 +1045,34 @@ static void macb_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *inf
- 	strcpy(info->bus_info, bp->pdev->dev.bus_id);
- }
- 
--static int macb_nway_reset(struct net_device *dev)
--{
--	struct macb *bp = netdev_priv(dev);
--	return mii_nway_restart(&bp->mii);
--}
--
- static struct ethtool_ops macb_ethtool_ops = {
- 	.get_settings		= macb_get_settings,
- 	.set_settings		= macb_set_settings,
- 	.get_drvinfo		= macb_get_drvinfo,
--	.nway_reset		= macb_nway_reset,
- 	.get_link		= ethtool_op_get_link,
- };
- 
- static int macb_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
- {
- 	struct macb *bp = netdev_priv(dev);
-+	struct phy_device *phydev = bp->phy_dev;
- 
- 	if (!netif_running(dev))
- 		return -EINVAL;
- 
--	return generic_mii_ioctl(&bp->mii, if_mii(rq), cmd, NULL);
--}
--
--static ssize_t macb_mii_show(const struct device *_dev, char *buf,
--			unsigned long addr)
--{
--	struct net_device *dev = to_net_dev(_dev);
--	struct macb *bp = netdev_priv(dev);
--	ssize_t ret = -EINVAL;
--
--	if (netif_running(dev)) {
--		int value;
--		value = macb_mdio_read(dev, bp->mii.phy_id, addr);
--		ret = sprintf(buf, "0x%04x\n", (uint16_t)value);
--	}
--
--	return ret;
--}
--
--#define MII_ENTRY(name, addr)					\
--static ssize_t show_##name(struct device *_dev,			\
--			   struct device_attribute *attr,	\
--			   char *buf)				\
--{								\
--	return macb_mii_show(_dev, buf, addr);			\
--}								\
--static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL)
--
--MII_ENTRY(bmcr, MII_BMCR);
--MII_ENTRY(bmsr, MII_BMSR);
--MII_ENTRY(physid1, MII_PHYSID1);
--MII_ENTRY(physid2, MII_PHYSID2);
--MII_ENTRY(advertise, MII_ADVERTISE);
--MII_ENTRY(lpa, MII_LPA);
--MII_ENTRY(expansion, MII_EXPANSION);
--
--static struct attribute *macb_mii_attrs[] = {
--	&dev_attr_bmcr.attr,
--	&dev_attr_bmsr.attr,
--	&dev_attr_physid1.attr,
--	&dev_attr_physid2.attr,
--	&dev_attr_advertise.attr,
--	&dev_attr_lpa.attr,
--	&dev_attr_expansion.attr,
--	NULL,
--};
--
--static struct attribute_group macb_mii_group = {
--	.name	= "mii",
--	.attrs	= macb_mii_attrs,
--};
--
--static void macb_unregister_sysfs(struct net_device *net)
--{
--	struct device *_dev = &net->dev;
-+	if (!phydev)
-+		return -ENODEV;
- 
--	sysfs_remove_group(&_dev->kobj, &macb_mii_group);
-+	return phy_mii_ioctl(phydev, if_mii(rq), cmd);
- }
- 
--static int macb_register_sysfs(struct net_device *net)
--{
--	struct device *_dev = &net->dev;
--	int ret;
--
--	ret = sysfs_create_group(&_dev->kobj, &macb_mii_group);
--	if (ret)
--		printk(KERN_WARNING
--		       "%s: sysfs mii attribute registration failed: %d\n",
--		       net->name, ret);
--	return ret;
--}
- static int __devinit macb_probe(struct platform_device *pdev)
- {
- 	struct eth_platform_data *pdata;
- 	struct resource *regs;
- 	struct net_device *dev;
- 	struct macb *bp;
-+	struct phy_device *phydev;
- 	unsigned long pclk_hz;
- 	u32 config;
- 	int err = -ENXIO;
-@@ -1073,6 +1146,7 @@ static int __devinit macb_probe(struct platform_device *pdev)
- 	dev->stop = macb_close;
- 	dev->hard_start_xmit = macb_start_xmit;
- 	dev->get_stats = macb_get_stats;
-+	dev->set_multicast_list = macb_set_rx_mode;
- 	dev->do_ioctl = macb_ioctl;
- 	dev->poll = macb_poll;
- 	dev->weight = 64;
-@@ -1080,10 +1154,6 @@ static int __devinit macb_probe(struct platform_device *pdev)
- 
- 	dev->base_addr = regs->start;
- 
--	INIT_DELAYED_WORK(&bp->periodic_task, macb_periodic_task);
--	mutex_init(&bp->mdio_mutex);
--	init_completion(&bp->mdio_complete);
--
- 	/* Set MII management clock divider */
- 	pclk_hz = clk_get_rate(bp->pclk);
- 	if (pclk_hz <= 20000000)
-@@ -1096,20 +1166,9 @@ static int __devinit macb_probe(struct platform_device *pdev)
- 		config = MACB_BF(CLK, MACB_CLK_DIV64);
- 	macb_writel(bp, NCFGR, config);
- 
--	bp->mii.dev = dev;
--	bp->mii.mdio_read = macb_mdio_read;
--	bp->mii.mdio_write = macb_mdio_write;
--	bp->mii.phy_id_mask = 0x1f;
--	bp->mii.reg_num_mask = 0x1f;
--
- 	macb_get_hwaddr(bp);
--	err = macb_phy_probe(bp);
--	if (err) {
--		dev_err(&pdev->dev, "Failed to detect PHY, aborting.\n");
--		goto err_out_free_irq;
--	}
--
- 	pdata = pdev->dev.platform_data;
-+
- 	if (pdata && pdata->is_rmii)
- #if defined(CONFIG_ARCH_AT91)
- 		macb_writel(bp, USRIO, (MACB_BIT(RMII) | MACB_BIT(CLKEN)) );
-@@ -1131,9 +1190,11 @@ static int __devinit macb_probe(struct platform_device *pdev)
- 		goto err_out_free_irq;
- 	}
- 
--	platform_set_drvdata(pdev, dev);
-+	if (macb_mii_init(bp) != 0) {
-+		goto err_out_unregister_netdev;
-+	}
- 
--	macb_register_sysfs(dev);
-+	platform_set_drvdata(pdev, dev);
- 
- 	printk(KERN_INFO "%s: Atmel MACB at 0x%08lx irq %d "
- 	       "(%02x:%02x:%02x:%02x:%02x:%02x)\n",
-@@ -1141,8 +1202,15 @@ static int __devinit macb_probe(struct platform_device *pdev)
- 	       dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
- 	       dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
- 
-+	phydev = bp->phy_dev;
-+	printk(KERN_INFO "%s: attached PHY driver [%s] "
-+		"(mii_bus:phy_addr=%s, irq=%d)\n",
-+		dev->name, phydev->drv->name, phydev->dev.bus_id, phydev->irq);
-+
- 	return 0;
- 
-+err_out_unregister_netdev:
-+	unregister_netdev(dev);
- err_out_free_irq:
- 	free_irq(dev->irq, dev);
- err_out_iounmap:
-@@ -1153,7 +1221,9 @@ err_out_disable_clocks:
- 	clk_put(bp->hclk);
- #endif
- 	clk_disable(bp->pclk);
-+#ifndef CONFIG_ARCH_AT91
- err_out_put_pclk:
-+#endif
- 	clk_put(bp->pclk);
- err_out_free_dev:
- 	free_netdev(dev);
-@@ -1171,7 +1241,8 @@ static int __devexit macb_remove(struct platform_device *pdev)
- 
- 	if (dev) {
- 		bp = netdev_priv(dev);
--		macb_unregister_sysfs(dev);
-+		mdiobus_unregister(&bp->mii_bus);
-+		kfree(bp->mii_bus.irq);
- 		unregister_netdev(dev);
- 		free_irq(dev->irq, dev);
- 		iounmap(bp->regs);
-diff --git a/drivers/net/macb.h b/drivers/net/macb.h
-index b3bb218..4e3283e 100644
---- a/drivers/net/macb.h
-+++ b/drivers/net/macb.h
-@@ -383,11 +383,11 @@ struct macb {
- 
- 	unsigned int		rx_pending, tx_pending;
- 
--	struct delayed_work	periodic_task;
--
--	struct mutex		mdio_mutex;
--	struct completion	mdio_complete;
--	struct mii_if_info	mii;
-+	struct mii_bus		mii_bus;
-+	struct phy_device	*phy_dev;
-+	unsigned int 		link;
-+	unsigned int 		speed;
-+	unsigned int 		duplex;
- };
- 
- #endif /* _MACB_H */
-diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
-index 4e4c10a..6d014fb 100644
---- a/drivers/rtc/Kconfig
-+++ b/drivers/rtc/Kconfig
-@@ -379,6 +379,13 @@ config RTC_DRV_PL031
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("SSC driver for Atmel AVR32 and AT91");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.22.1/drivers/misc/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/misc/Makefile	(revision 1)
++++ linux-2.6.22.1/drivers/misc/Makefile	(arbetskopia)
+@@ -14,3 +14,4 @@
+ obj-$(CONFIG_SGI_IOC4)		+= ioc4.o
+ obj-$(CONFIG_SONY_LAPTOP)	+= sony-laptop.o
+ obj-$(CONFIG_THINKPAD_ACPI)	+= thinkpad_acpi.o
++obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
+Index: linux-2.6.22.1/drivers/rtc/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/rtc/Kconfig	(revision 1)
++++ linux-2.6.22.1/drivers/rtc/Kconfig	(arbetskopia)
+@@ -379,6 +379,13 @@
  	  To compile this driver as a module, choose M here: the
  	  module will be called rtc-pl031.
  
@@ -8746,23 +18497,10 @@ index 4e4c10a..6d014fb 100644
  config RTC_DRV_AT91RM9200
  	tristate "AT91RM9200"
  	depends on RTC_CLASS && ARCH_AT91RM9200
-diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
-index a1afbc2..5fb1c10 100644
---- a/drivers/rtc/Makefile
-+++ b/drivers/rtc/Makefile
-@@ -19,6 +19,7 @@ obj-$(CONFIG_RTC_DRV_CMOS)	+= rtc-cmos.o
- obj-$(CONFIG_RTC_DRV_X1205)	+= rtc-x1205.o
- obj-$(CONFIG_RTC_DRV_ISL1208)	+= rtc-isl1208.o
- obj-$(CONFIG_RTC_DRV_TEST)	+= rtc-test.o
-+obj-$(CONFIG_RTC_DRV_AT32AP700X)	+= rtc-at32ap700x.o
- obj-$(CONFIG_RTC_DRV_DS1307)	+= rtc-ds1307.o
- obj-$(CONFIG_RTC_DRV_DS1672)	+= rtc-ds1672.o
- obj-$(CONFIG_RTC_DRV_DS1742)	+= rtc-ds1742.o
-diff --git a/drivers/rtc/rtc-at32ap700x.c b/drivers/rtc/rtc-at32ap700x.c
-new file mode 100644
-index 0000000..2999214
---- /dev/null
-+++ b/drivers/rtc/rtc-at32ap700x.c
+Index: linux-2.6.22.1/drivers/rtc/rtc-at32ap700x.c
+===================================================================
+--- linux-2.6.22.1/drivers/rtc/rtc-at32ap700x.c	(revision 0)
++++ linux-2.6.22.1/drivers/rtc/rtc-at32ap700x.c	(revision 0)
 @@ -0,0 +1,317 @@
 +/*
 + * An RTC driver for the AVR32 AT32AP700x processor series.
@@ -9081,95 +18819,2312 @@ index 0000000..2999214
 +MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
 +MODULE_DESCRIPTION("Real time clock for AVR32 AT32AP700x");
 +MODULE_LICENSE("GPL");
-diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
-index 3320bcd..4d6b3c5 100644
---- a/drivers/serial/atmel_serial.c
-+++ b/drivers/serial/atmel_serial.c
-@@ -114,6 +114,7 @@ struct atmel_uart_port {
- 	struct uart_port	uart;		/* uart */
- 	struct clk		*clk;		/* uart clock */
- 	unsigned short		suspended;	/* is port suspended? */
-+	int			break_active;	/* break being received */
+Index: linux-2.6.22.1/drivers/rtc/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/rtc/Makefile	(revision 1)
++++ linux-2.6.22.1/drivers/rtc/Makefile	(arbetskopia)
+@@ -19,6 +19,7 @@
+ obj-$(CONFIG_RTC_DRV_X1205)	+= rtc-x1205.o
+ obj-$(CONFIG_RTC_DRV_ISL1208)	+= rtc-isl1208.o
+ obj-$(CONFIG_RTC_DRV_TEST)	+= rtc-test.o
++obj-$(CONFIG_RTC_DRV_AT32AP700X)	+= rtc-at32ap700x.o
+ obj-$(CONFIG_RTC_DRV_DS1307)	+= rtc-ds1307.o
+ obj-$(CONFIG_RTC_DRV_DS1672)	+= rtc-ds1672.o
+ obj-$(CONFIG_RTC_DRV_DS1742)	+= rtc-ds1742.o
+Index: linux-2.6.22.1/drivers/char/watchdog/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/char/watchdog/Kconfig	(revision 1)
++++ linux-2.6.22.1/drivers/char/watchdog/Kconfig	(arbetskopia)
+@@ -187,6 +187,26 @@
+ 
+ 	  Say N if you are unsure.
+ 
++# AVR32 Architecture
++
++config AT32AP700X_WDT
++	tristate "AT32AP700x watchdog"
++	depends on WATCHDOG && CPU_AT32AP7000
++	help
++	  Watchdog timer embedded into AT32AP700x devices. This will reboot
++	  your system when the timeout is reached.
++
++config AT32AP700X_WDT_TIMEOUT
++	int "Timeout value for AT32AP700x watchdog"
++	depends on AT32AP700X_WDT
++	default "2"
++	range 1 2
++	help
++	  Sets the timeout value for the watchdog in AT32AP700x devices.
++	  Limited by hardware to be 1 or 2 seconds.
++
++	  Set to 2 seconds by default.
++
+ # X86 (i386 + ia64 + x86_64) Architecture
+ 
+ config ACQUIRE_WDT
+Index: linux-2.6.22.1/drivers/char/watchdog/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/char/watchdog/Makefile	(revision 1)
++++ linux-2.6.22.1/drivers/char/watchdog/Makefile	(arbetskopia)
+@@ -36,6 +36,9 @@
+ obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
+ obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
+ 
++# AVR32 Architecture
++obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
++
+ # X86 (i386 + ia64 + x86_64) Architecture
+ obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
+ obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
+Index: linux-2.6.22.1/drivers/char/watchdog/at32ap700x_wdt.c
+===================================================================
+--- linux-2.6.22.1/drivers/char/watchdog/at32ap700x_wdt.c	(revision 0)
++++ linux-2.6.22.1/drivers/char/watchdog/at32ap700x_wdt.c	(revision 0)
+@@ -0,0 +1,325 @@
++/*
++ * Watchdog driver for Atmel AT32AP700X devices
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/miscdevice.h>
++#include <linux/fs.h>
++#include <linux/platform_device.h>
++#include <linux/watchdog.h>
++#include <linux/uaccess.h>
++#include <linux/io.h>
++
++#define TIMEOUT_MIN		1
++#define TIMEOUT_DEFAULT		CONFIG_AT32AP700X_WDT_TIMEOUT
++#define TIMEOUT_MAX		2
++
++/* Watchdog registers and write/read macro */
++#define	WDT_CTRL		0x00
++#define WDT_CTRL_EN		   0
++#define WDT_CTRL_PSEL		   8
++#define WDT_CTRL_KEY		  24
++
++#define WDT_CLR			0x04
++
++#define WDT_BIT(name)		(1 << WDT_##name)
++#define WDT_BF(name,value)	((value) << WDT_##name)
++
++#define wdt_readl(dev,reg)				\
++	__raw_readl((dev)->regs + WDT_##reg)
++#define wdt_writel(dev,reg,value)			\
++	__raw_writel((value), (dev)->regs + WDT_##reg)
++
++struct wdt_at32ap700x {
++	void __iomem		*regs;
++	int			timeout;
++	int			users;
++	struct miscdevice	miscdev;
++};
++
++static struct wdt_at32ap700x *wdt;
++
++/*
++ * Disable the watchdog.
++ */
++static void inline at32_wdt_stop(void)
++{
++	unsigned long psel = wdt_readl(wdt, CTRL) & WDT_BF(CTRL_PSEL, 0x0f);
++	wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0x55));
++	wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0xaa));
++}
++
++/*
++ * Enable and reset the watchdog.
++ */
++static void inline at32_wdt_start(void)
++{
++	/* 0xf is 2^16 divider = 2 sec, 0xe is 2^15 divider = 1 sec */
++	unsigned long psel = (wdt->timeout > 1) ? 0xf : 0xe;
++
++	wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
++			| WDT_BF(CTRL_PSEL, psel)
++			| WDT_BF(CTRL_KEY, 0x55));
++	wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
++			| WDT_BF(CTRL_PSEL, psel)
++			| WDT_BF(CTRL_KEY, 0xaa));
++}
++
++/*
++ * Pat the watchdog timer.
++ */
++static void inline at32_wdt_pat(void)
++{
++	wdt_writel(wdt, CLR, 0x42);
++}
++
++/*
++ * Watchdog device is opened, and watchdog starts running.
++ */
++static int at32_wdt_open(struct inode *inode, struct file *file)
++{
++	if (test_and_set_bit(1, &wdt->users))
++		return -EBUSY;
++
++	at32_wdt_start();
++	return nonseekable_open(inode, file);
++}
++
++/*
++ * Close the watchdog device. If CONFIG_WATCHDOG_NOWAYOUT is _not_ defined then
++ * the watchdog is also disabled.
++ */
++static int at32_wdt_close(struct inode *inode, struct file *file)
++{
++#ifndef CONFIG_WATCHDOG_NOWAYOUT
++	at32_wdt_stop();
++#endif
++	clear_bit(1, &wdt->users);
++	return 0;
++}
++
++/*
++ * Change the watchdog time interval.
++ */
++static int at32_wdt_settimeout(int time)
++{
++	/*
++	 * All counting occurs at 1 / SLOW_CLOCK (32 kHz) and max prescaler is
++	 * 2 ^ 16 allowing up to 2 seconds timeout.
++	 */
++	if ((time < TIMEOUT_MIN) || (time > TIMEOUT_MAX))
++		return -EINVAL;
++
++	/*
++	 * Set new watchdog time. It will be used when at32_wdt_start() is
++	 * called.
++	 */
++	wdt->timeout = time;
++	return 0;
++}
++
++static struct watchdog_info at32_wdt_info = {
++	.identity	= "at32ap700x watchdog",
++	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
++};
++
++/*
++ * Handle commands from user-space.
++ */
++static int at32_wdt_ioctl(struct inode *inode, struct file *file,
++		unsigned int cmd, unsigned long arg)
++{
++	int ret = -ENOTTY;
++	int time;
++	void __user *argp = (void __user *)arg;
++	int __user *p = argp;
++
++	switch (cmd) {
++	case WDIOC_KEEPALIVE:
++		at32_wdt_pat();
++		ret = 0;
++		break;
++	case WDIOC_GETSUPPORT:
++		ret = copy_to_user(argp, &at32_wdt_info,
++				sizeof(at32_wdt_info)) ? -EFAULT : 0;
++		break;
++	case WDIOC_SETTIMEOUT:
++		ret = get_user(time, p);
++		if (ret)
++			break;
++		ret = at32_wdt_settimeout(time);
++		if (ret)
++			break;
++		/* Enable new time value */
++		at32_wdt_start();
++		/* fall through */
++	case WDIOC_GETTIMEOUT:
++		ret = put_user(wdt->timeout, p);
++		break;
++	case WDIOC_GETSTATUS: /* fall through */
++	case WDIOC_GETBOOTSTATUS:
++		ret = put_user(0, p);
++		break;
++	case WDIOC_SETOPTIONS:
++		ret = get_user(time, p);
++		if (ret)
++			break;
++		if (time & WDIOS_DISABLECARD)
++			at32_wdt_stop();
++		if (time & WDIOS_ENABLECARD)
++			at32_wdt_start();
++		ret = 0;
++		break;
++	}
++
++	return ret;
++}
++
++static ssize_t at32_wdt_write(struct file *file, const char *data, size_t len,
++				loff_t *ppos)
++{
++	at32_wdt_pat();
++	return len;
++}
++
++static const struct file_operations at32_wdt_fops = {
++	.owner		= THIS_MODULE,
++	.llseek		= no_llseek,
++	.ioctl		= at32_wdt_ioctl,
++	.open		= at32_wdt_open,
++	.release	= at32_wdt_close,
++	.write		= at32_wdt_write,
++};
++
++static int __init at32_wdt_probe(struct platform_device *pdev)
++{
++	struct resource	*regs;
++	int ret;
++
++	if (wdt) {
++		dev_dbg(&pdev->dev, "only 1 wdt instance supported.\n");
++		return -EBUSY;
++	}
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs) {
++		dev_dbg(&pdev->dev, "missing mmio resource\n");
++		return -ENXIO;
++	}
++
++	wdt = kzalloc(sizeof(struct wdt_at32ap700x), GFP_KERNEL);
++	if (!wdt) {
++		dev_dbg(&pdev->dev, "no memory for wdt structure\n");
++		return -ENOMEM;
++	}
++
++	wdt->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!wdt->regs) {
++		ret = -ENOMEM;
++		dev_dbg(&pdev->dev, "could not map I/O memory\n");
++		goto err_free;
++	}
++	wdt->users = 0;
++	wdt->miscdev.minor = WATCHDOG_MINOR;
++	wdt->miscdev.name = "watchdog";
++	wdt->miscdev.fops = &at32_wdt_fops;
++
++	if (at32_wdt_settimeout(TIMEOUT_DEFAULT)) {
++		at32_wdt_settimeout(TIMEOUT_MAX);
++		dev_dbg(&pdev->dev,
++			"default timeout invalid, set to %d sec.\n",
++			TIMEOUT_MAX);
++	}
++
++	ret = misc_register(&wdt->miscdev);
++	if (ret) {
++		dev_dbg(&pdev->dev, "failed to register wdt miscdev\n");
++		goto err_iounmap;
++	}
++
++	platform_set_drvdata(pdev, wdt);
++	wdt->miscdev.parent = &pdev->dev;
++	dev_info(&pdev->dev, "AT32AP700X WDT at 0x%p\n", wdt->regs);
++
++	return 0;
++
++err_iounmap:
++	iounmap(wdt->regs);
++err_free:
++	kfree(wdt);
++	wdt = NULL;
++	return ret;
++}
++
++static int __exit at32_wdt_remove(struct platform_device *pdev)
++{
++	if (wdt && platform_get_drvdata(pdev) == wdt) {
++		misc_deregister(&wdt->miscdev);
++		iounmap(wdt->regs);
++		kfree(wdt);
++		wdt = NULL;
++		platform_set_drvdata(pdev, NULL);
++	}
++
++	return 0;
++}
++
++static void at32_wdt_shutdown(struct platform_device *pdev)
++{
++	at32_wdt_stop();
++}
++
++#ifdef CONFIG_PM
++static int at32_wdt_suspend(struct platform_device *pdev, pm_message_t message)
++{
++	at32_wdt_stop();
++	return 0;
++}
++
++static int at32_wdt_resume(struct platform_device *pdev)
++{
++	if (wdt->users)
++		at32_wdt_start();
++	return 0;
++}
++#else
++#define at32_wdt_suspend NULL
++#define at32_wdt_resume NULL
++#endif
++
++static struct platform_driver at32_wdt_driver = {
++	.remove		= __exit_p(at32_wdt_remove),
++	.suspend	= at32_wdt_suspend,
++	.resume		= at32_wdt_resume,
++	.driver		= {
++		.name	= "at32_wdt",
++		.owner	= THIS_MODULE,
++	},
++	.shutdown	= at32_wdt_shutdown,
++};
++
++static int __init at32_wdt_init(void)
++{
++	return platform_driver_probe(&at32_wdt_driver, at32_wdt_probe);
++}
++module_init(at32_wdt_init);
++
++static void __exit at32_wdt_exit(void)
++{
++	platform_driver_unregister(&at32_wdt_driver);
++}
++module_exit(at32_wdt_exit);
++
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("Watchdog driver for Atmel AT32AP700X");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+Index: linux-2.6.22.1/drivers/char/at91_spi.c
+===================================================================
+--- linux-2.6.22.1/drivers/char/at91_spi.c	(revision 0)
++++ linux-2.6.22.1/drivers/char/at91_spi.c	(revision 0)
+@@ -0,0 +1,336 @@
++/*
++ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 (Thunder)
++ *
++ *  Copyright (C) SAN People (Pty) Ltd
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/init.h>
++#include <linux/dma-mapping.h>
++#include <linux/module.h>
++#include <linux/sched.h>
++#include <linux/completion.h>
++#include <linux/interrupt.h>
++#include <linux/clk.h>
++#include <linux/platform_device.h>
++#include <linux/atmel_pdc.h>
++#include <asm/io.h>
++#include <asm/semaphore.h>
++
++#include <asm/arch/at91_spi.h>
++#include <asm/arch/board.h>
++#include <asm/arch/spi.h>
++
++#undef DEBUG_SPI
++
++static struct spi_local spi_dev[NR_SPI_DEVICES];	/* state of the SPI devices */
++static int spi_enabled = 0;
++static struct semaphore spi_lock;			/* protect access to SPI bus */
++static int current_device = -1;				/* currently selected SPI device */
++static struct clk *spi_clk;				/* SPI clock */
++static void __iomem *spi_base;				/* SPI peripheral base-address */
++
++DECLARE_COMPLETION(transfer_complete);
++
++
++#define at91_spi_read(reg)		__raw_readl(spi_base + (reg))
++#define at91_spi_write(reg, val)	__raw_writel((val), spi_base + (reg))
++
++
++/* ......................................................................... */
++
++/*
++ * Access and enable the SPI bus.
++ * This MUST be called before any transfers are performed.
++ */
++void spi_access_bus(short device)
++{
++	/* Ensure that requested device is valid */
++	if ((device < 0) || (device >= NR_SPI_DEVICES))
++		panic("at91_spi: spi_access_bus called with invalid device");
++
++	if (spi_enabled == 0) {
++		clk_enable(spi_clk);				/* Enable Peripheral clock */
++		at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN);	/* Enable SPI */
++#ifdef DEBUG_SPI
++		printk("SPI on\n");
++#endif
++	}
++	spi_enabled++;
++
++	/* Lock the SPI bus */
++	down(&spi_lock);
++	current_device = device;
++
++	/* Configure SPI bus for device */
++	at91_spi_write(AT91_SPI_MR, AT91_SPI_MSTR | AT91_SPI_MODFDIS | (spi_dev[device].pcs << 16));
++}
++
++/*
++ * Relinquish control of the SPI bus.
++ */
++void spi_release_bus(short device)
++{
++	if (device != current_device)
++		panic("at91_spi: spi_release called with invalid device");
++
++	/* Release the SPI bus */
++	current_device = -1;
++	up(&spi_lock);
++
++	spi_enabled--;
++	if (spi_enabled == 0) {
++		at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS);	/* Disable SPI */
++		clk_disable(spi_clk);				/* Disable Peripheral clock */
++#ifdef DEBUG_SPI
++		printk("SPI off\n");
++#endif
++	}
++}
++
++/*
++ * Perform a data transfer over the SPI bus
++ */
++int spi_transfer(struct spi_transfer_list* list)
++{
++	struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
++	int tx_size;
++
++	if (!list)
++		panic("at91_spi: spi_transfer called with NULL transfer list");
++	if (current_device == -1)
++		panic("at91_spi: spi_transfer called without acquiring bus");
++
++#ifdef DEBUG_SPI
++	printk("SPI transfer start [%i]\n", list->nr_transfers);
++#endif
++
++	/* If we are in 16-bit mode, we need to modify what we pass to the PDC */
++	tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
++
++	/* Store transfer list */
++	device->xfers = list;
++	list->curr = 0;
++
++	/* Assume there must be at least one transfer */
++	device->tx = dma_map_single(NULL, list->tx[0], list->txlen[0], DMA_TO_DEVICE);
++	device->rx = dma_map_single(NULL, list->rx[0], list->rxlen[0], DMA_FROM_DEVICE);
++
++	/* Program PDC registers */
++	at91_spi_write(ATMEL_PDC_TPR, device->tx);
++	at91_spi_write(ATMEL_PDC_RPR, device->rx);
++	at91_spi_write(ATMEL_PDC_TCR, list->txlen[0] / tx_size);
++	at91_spi_write(ATMEL_PDC_RCR, list->rxlen[0] / tx_size);
++
++	/* Is there a second transfer? */
++	if (list->nr_transfers > 1) {
++		device->txnext = dma_map_single(NULL, list->tx[1], list->txlen[1], DMA_TO_DEVICE);
++		device->rxnext = dma_map_single(NULL, list->rx[1], list->rxlen[1], DMA_FROM_DEVICE);
++
++		/* Program Next PDC registers */
++		at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
++		at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
++		at91_spi_write(ATMEL_PDC_TNCR, list->txlen[1] / tx_size);
++		at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[1] / tx_size);
++	}
++	else {
++		device->txnext = 0;
++		device->rxnext = 0;
++		at91_spi_write(ATMEL_PDC_TNCR, 0);
++		at91_spi_write(ATMEL_PDC_RNCR, 0);
++	}
++
++	// TODO: If we are doing consecutive transfers (at high speed, or
++	//   small buffers), then it might be worth modifying the 'Delay between
++	//   Consecutive Transfers' in the CSR registers.
++	//   This is an issue if we cannot chain the next buffer fast enough
++	//   in the interrupt handler.
++
++	/* Enable transmitter and receiver */
++	at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN | ATMEL_PDC_TXTEN);
++
++	at91_spi_write(AT91_SPI_IER, AT91_SPI_ENDRX);		/* enable buffer complete interrupt */
++	wait_for_completion(&transfer_complete);
++
++#ifdef DEBUG_SPI
++	printk("SPI transfer end\n");
++#endif
++
++	return 0;
++}
++
++/* ......................................................................... */
++
++/*
++ * Handle interrupts from the SPI controller.
++ */
++static irqreturn_t at91spi_interrupt(int irq, void *dev_id)
++{
++	unsigned int status;
++	struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
++	struct spi_transfer_list *list = device->xfers;
++
++#ifdef DEBUG_SPI
++	printk("SPI interrupt %i\n", current_device);
++#endif
++
++	if (!list)
++		panic("at91_spi: spi_interrupt with a NULL transfer list");
++
++		status = at91_spi_read(AT91_SPI_SR) & at91_spi_read(AT91_SPI_IMR);	/* read status */
++
++	dma_unmap_single(NULL, device->tx, list->txlen[list->curr], DMA_TO_DEVICE);
++	dma_unmap_single(NULL, device->rx, list->rxlen[list->curr], DMA_FROM_DEVICE);
++
++	device->tx = device->txnext;	/* move next transfer to current transfer */
++	device->rx = device->rxnext;
++
++	list->curr = list->curr + 1;
++	if (list->curr == list->nr_transfers) {		/* all transfers complete */
++		at91_spi_write(AT91_SPI_IDR, AT91_SPI_ENDRX);		/* disable interrupt */
++
++		/* Disable transmitter and receiver */
++		at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
++
++		device->xfers = NULL;
++		complete(&transfer_complete);
++	}
++	else if (list->curr+1 == list->nr_transfers) {	/* no more next transfers */
++		device->txnext = 0;
++		device->rxnext = 0;
++		at91_spi_write(ATMEL_PDC_TNCR, 0);
++		at91_spi_write(ATMEL_PDC_RNCR, 0);
++	}
++	else {
++		int i = (list->curr)+1;
++
++		/* If we are in 16-bit mode, we need to modify what we pass to the PDC */
++		int tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
++
++		device->txnext = dma_map_single(NULL, list->tx[i], list->txlen[i], DMA_TO_DEVICE);
++		device->rxnext = dma_map_single(NULL, list->rx[i], list->rxlen[i], DMA_FROM_DEVICE);
++		at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
++		at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
++		at91_spi_write(ATMEL_PDC_TNCR, list->txlen[i] / tx_size);
++		at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[i] / tx_size);
++	}
++	return IRQ_HANDLED;
++}
++
++/* ......................................................................... */
++
++/*
++ * Initialize the SPI controller
++ */
++static int __init at91spi_probe(struct platform_device *pdev)
++{
++	int i;
++	unsigned long scbr;
++	struct resource *res;
++
++	init_MUTEX(&spi_lock);
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res)
++		return -ENXIO;
++
++	if (!request_mem_region(res->start, res->end - res->start + 1, "at91_spi"))
++		return -EBUSY;
++
++	spi_base = ioremap(res->start, res->end - res->start + 1);
++	if (!spi_base) {
++		release_mem_region(res->start, res->end - res->start + 1);
++		return -ENOMEM;
++	}
++
++	spi_clk = clk_get(NULL, "spi_clk");
++	if (IS_ERR(spi_clk)) {
++		printk(KERN_ERR "at91_spi: no clock defined\n");
++		iounmap(spi_base);
++		release_mem_region(res->start, res->end - res->start + 1);
++		return -ENODEV;
++	}
++
++	at91_spi_write(AT91_SPI_CR, AT91_SPI_SWRST);	/* software reset of SPI controller */
++
++	/*
++	 * Calculate the correct SPI baud-rate divisor.
++	 */
++	scbr = clk_get_rate(spi_clk) / (2 * DEFAULT_SPI_CLK);
++	scbr = scbr + 1;		/* round up */
++
++	printk(KERN_INFO "at91_spi: Baud rate set to %ld\n", clk_get_rate(spi_clk) / (2 * scbr));
++
++	/* Set Chip Select registers to good defaults */
++	for (i = 0; i < 4; i++) {
++		at91_spi_write(AT91_SPI_CSR(i), AT91_SPI_CPOL | AT91_SPI_BITS_8 | (16 << 16) | (scbr << 8));
++	}
++
++	at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
++
++	memset(&spi_dev, 0, sizeof(spi_dev));
++	spi_dev[0].pcs = 0xE;
++	spi_dev[1].pcs = 0xD;
++	spi_dev[2].pcs = 0xB;
++	spi_dev[3].pcs = 0x7;
++
++	if (request_irq(AT91RM9200_ID_SPI, at91spi_interrupt, 0, "spi", NULL)) {
++		clk_put(spi_clk);
++		iounmap(spi_base);
++		release_mem_region(res->start, res->end - res->start + 1);
++		return -EBUSY;
++	}
++
++	at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN);		/* Enable SPI */
++
++	return 0;
++}
++
++static int __devexit at91spi_remove(struct platform_device *pdev)
++{
++	struct resource *res;
++
++	at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS);		/* Disable SPI */
++	clk_put(spi_clk);
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	iounmap(spi_base);
++	release_mem_region(res->start, res->end - res->start + 1);
++
++	free_irq(AT91RM9200_ID_SPI, 0);
++	return 0;
++}
++
++static struct platform_driver at91spi_driver = {
++	.probe		= at91spi_probe,
++	.remove		= __devexit_p(at91spi_remove),
++	.driver		= {
++		.name	= "at91_spi",
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init at91spi_init(void)
++{
++	return platform_driver_register(&at91spi_driver);
++}
++
++static void __exit at91spi_exit(void)
++{
++	platform_driver_unregister(&at91spi_driver);
++}
++
++EXPORT_SYMBOL(spi_access_bus);
++EXPORT_SYMBOL(spi_release_bus);
++EXPORT_SYMBOL(spi_transfer);
++
++module_init(at91spi_init);
++module_exit(at91spi_exit);
++
++MODULE_LICENSE("GPL")
++MODULE_AUTHOR("Andrew Victor")
++MODULE_DESCRIPTION("SPI driver for Atmel AT91RM9200")
+Index: linux-2.6.22.1/drivers/char/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/char/Kconfig	(revision 1)
++++ linux-2.6.22.1/drivers/char/Kconfig	(arbetskopia)
+@@ -1083,5 +1083,21 @@
+ 
+ source "drivers/s390/char/Kconfig"
+ 
++config AT91_SPI
++	bool "SPI driver (legacy) for AT91RM9200 processors"
++	depends on ARCH_AT91RM9200
++	default y
++	help
++	  The SPI driver gives access to this serial bus on the AT91RM9200
++	  processor.
++
++config AT91_SPIDEV
++	bool "SPI device interface (legacy) for AT91RM9200 processors"
++	depends on ARCH_AT91RM9200 && AT91_SPI
++	default n
++	help
++	  The SPI driver gives user mode access to this serial
++	  bus on the AT91RM9200 processor.
++
+ endmenu
+ 
+Index: linux-2.6.22.1/drivers/char/at91_spidev.c
+===================================================================
+--- linux-2.6.22.1/drivers/char/at91_spidev.c	(revision 0)
++++ linux-2.6.22.1/drivers/char/at91_spidev.c	(revision 0)
+@@ -0,0 +1,236 @@
++/*
++ * User-space interface to the SPI bus on Atmel AT91RM9200
++ *
++ *  Copyright (C) 2003 SAN People (Pty) Ltd
++ *
++ * Based on SPI driver by Rick Bronson
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/highmem.h>
++#include <linux/pagemap.h>
++#include <asm/arch/spi.h>
++
++#ifdef CONFIG_DEVFS_FS
++#include <linux/devfs_fs_kernel.h>
++#endif
++
++
++#undef DEBUG_SPIDEV
++
++/* ......................................................................... */
++
++/*
++ * Read or Write to SPI bus.
++ */
++static ssize_t spidev_rd_wr(struct file *file, char *buf, size_t count, loff_t *offset)
++{
++	unsigned int spi_device = (unsigned int) file->private_data;
++
++	struct mm_struct * mm;
++	struct page ** maplist;
++	struct spi_transfer_list* list;
++	int    pgcount;
++
++	unsigned int ofs, pagelen;
++	int res, i, err;
++
++	if (!count) {
++		return 0;
++	}
++
++	list = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
++	if (!list) {
++		return -ENOMEM;
++	}
++
++	mm = current->mm;
++
++	pgcount = ((unsigned long)buf+count+PAGE_SIZE-1)/PAGE_SIZE - (unsigned long)buf/PAGE_SIZE;
++
++	if (pgcount >= MAX_SPI_TRANSFERS) {
++		kfree(list);
++		return -EFBIG;
++	}
++
++	maplist = kmalloc (pgcount * sizeof (struct page *), GFP_KERNEL);
++
++	if (!maplist) {
++		kfree(list);
++		return -ENOMEM;
++	}
++	flush_cache_all();
++	down_read(&mm->mmap_sem);
++	err= get_user_pages(current, mm, (unsigned long)buf, pgcount, 1, 0, maplist, NULL);
++	up_read(&mm->mmap_sem);
++
++	if (err < 0) {
++		kfree(list);
++		kfree(maplist);
++		return err;
++	}
++	pgcount = err;
++
++#ifdef DEBUG_SPIDEV
++	printk("spidev_rd_rw: %i %i\n", count, pgcount);
++#endif
++
++	/* Set default return value = transfer length */
++	res = count;
++
++	/*
++	 * At this point, the virtual area buf[0] .. buf[count-1] will have
++	 * corresponding pages mapped in the physical memory and locked until
++	 * we unmap the kiobuf.  The pages cannot be swapped out or moved
++	 * around.
++	 */
++	ofs = (unsigned long) buf & (PAGE_SIZE -1);
++	pagelen = PAGE_SIZE - ofs;
++	if (count < pagelen)
++		pagelen = count;
++
++	for (i = 0; i < pgcount; i++) {
++		flush_dcache_page(maplist[i]);
++
++		list->tx[i] = list->rx[i] = page_address(maplist[i]) + ofs;
++		list->txlen[i] = list->rxlen[i] = pagelen;
++
++#ifdef DEBUG_SPIDEV
++		printk("  %i: %x  (%i)\n", i, list->tx[i], list->txlen[i]);
++#endif
++
++		ofs = 0;	/* all subsequent transfers start at beginning of a page */
++		count = count - pagelen;
++		pagelen = (count < PAGE_SIZE) ? count : PAGE_SIZE;
++	}
++	list->nr_transfers = pgcount;
++
++	/* Perform transfer on SPI bus */
++	spi_access_bus(spi_device);
++	spi_transfer(list);
++	spi_release_bus(spi_device);
++
++	while (pgcount--) {
++		page_cache_release (maplist[pgcount]);
++	}
++	flush_cache_all();
++
++	kfree(maplist);
++	kfree(list);
++
++	return res;
++}
++
++static int spidev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
++{
++	int spi_device = MINOR(inode->i_rdev);
++
++	if (spi_device >= NR_SPI_DEVICES)
++		return -ENODEV;
++
++	// TODO: This interface can be used to configure the SPI bus.
++	// Configurable options could include: Speed, Clock Polarity, Clock Phase
++
++	switch(cmd) {
++		default:
++			return -ENOIOCTLCMD;
++	}
++}
++
++/*
++ * Open the SPI device
++ */
++static int spidev_open(struct inode *inode, struct file *file)
++{
++	unsigned int spi_device = MINOR(inode->i_rdev);
++
++	if (spi_device >= NR_SPI_DEVICES)
++		return -ENODEV;
++
++	/*
++	 * 'private_data' is actually a pointer, but we overload it with the
++	 * value we want to store.
++	 */
++	file->private_data = (void *)spi_device;
++
++	return 0;
++}
++
++/*
++ * Close the SPI device
++ */
++static int spidev_close(struct inode *inode, struct file *file)
++{
++	return 0;
++}
++
++/* ......................................................................... */
++
++static struct file_operations spidev_fops = {
++	.owner		= THIS_MODULE,
++	.llseek		= no_llseek,
++	.read		= spidev_rd_wr,
++	.write		= (int (*) (struct file *file, const char *buf, size_t count, loff_t *offset))spidev_rd_wr,
++	.ioctl		= spidev_ioctl,
++	.open		= spidev_open,
++	.release	= spidev_close,
++};
++
++/*
++ * Install the SPI /dev interface driver
++ */
++static int __init at91_spidev_init(void)
++{
++#ifdef CONFIG_DEVFS_FS
++	int i;
++#endif
++
++	if (register_chrdev(SPI_MAJOR, "spi", &spidev_fops)) {
++		printk(KERN_ERR "at91_spidev: Unable to get major %d for SPI bus\n", SPI_MAJOR);
++		return -EIO;
++	}
++
++#ifdef CONFIG_DEVFS_FS
++	devfs_mk_dir("spi");
++	for (i = 0; i < NR_SPI_DEVICES; i++) {
++		devfs_mk_cdev(MKDEV(SPI_MAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR, "spi/%d",i);
++	}
++#endif
++	printk(KERN_INFO "AT91 SPI driver loaded\n");
++
++	return 0;
++}
++
++/*
++ * Remove the SPI /dev interface driver
++ */
++static void __exit at91_spidev_exit(void)
++{
++#ifdef CONFIG_DEVFS_FS
++	int i;
++	for (i = 0; i < NR_SPI_DEVICES; i++) {
++		devfs_remove("spi/%d", i);
++	}
++
++	devfs_remove("spi");
++#endif
++
++	if (unregister_chrdev(SPI_MAJOR, "spi")) {
++		printk(KERN_ERR "at91_spidev: Unable to release major %d for SPI bus\n", SPI_MAJOR);
++		return;
++	}
++}
++
++module_init(at91_spidev_init);
++module_exit(at91_spidev_exit);
++
++MODULE_LICENSE("GPL")
++MODULE_AUTHOR("Andrew Victor")
++MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200")
+Index: linux-2.6.22.1/drivers/char/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/char/Makefile	(revision 1)
++++ linux-2.6.22.1/drivers/char/Makefile	(arbetskopia)
+@@ -93,6 +93,8 @@
+ obj-$(CONFIG_GPIO_VR41XX)	+= vr41xx_giu.o
+ obj-$(CONFIG_GPIO_TB0219)	+= tb0219.o
+ obj-$(CONFIG_TELCLOCK)		+= tlclk.o
++obj-$(CONFIG_AT91_SPI)		+= at91_spi.o
++obj-$(CONFIG_AT91_SPIDEV)	+= at91_spidev.o
+ 
+ obj-$(CONFIG_WATCHDOG)		+= watchdog/
+ obj-$(CONFIG_MWAVE)		+= mwave/
+Index: linux-2.6.22.1/drivers/net/macb.c
+===================================================================
+--- linux-2.6.22.1/drivers/net/macb.c	(revision 1)
++++ linux-2.6.22.1/drivers/net/macb.c	(arbetskopia)
+@@ -17,13 +17,14 @@
+ #include <linux/init.h>
+ #include <linux/netdevice.h>
+ #include <linux/etherdevice.h>
+-#include <linux/mii.h>
+-#include <linux/mutex.h>
+ #include <linux/dma-mapping.h>
+-#include <linux/ethtool.h>
+ #include <linux/platform_device.h>
++#include <linux/phy.h>
+ 
+ #include <asm/arch/board.h>
++#if defined(CONFIG_ARCH_AT91)
++#include <asm/arch/cpu.h>
++#endif
+ 
+ #include "macb.h"
+ 
+@@ -85,172 +86,202 @@
+ 		memcpy(bp->dev->dev_addr, addr, sizeof(addr));
+ }
+ 
+-static void macb_enable_mdio(struct macb *bp)
++static int macb_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+ {
+-	unsigned long flags;
+-	u32 reg;
+-
+-	spin_lock_irqsave(&bp->lock, flags);
+-	reg = macb_readl(bp, NCR);
+-	reg |= MACB_BIT(MPE);
+-	macb_writel(bp, NCR, reg);
+-	macb_writel(bp, IER, MACB_BIT(MFD));
+-	spin_unlock_irqrestore(&bp->lock, flags);
+-}
+-
+-static void macb_disable_mdio(struct macb *bp)
+-{
+-	unsigned long flags;
+-	u32 reg;
+-
+-	spin_lock_irqsave(&bp->lock, flags);
+-	reg = macb_readl(bp, NCR);
+-	reg &= ~MACB_BIT(MPE);
+-	macb_writel(bp, NCR, reg);
+-	macb_writel(bp, IDR, MACB_BIT(MFD));
+-	spin_unlock_irqrestore(&bp->lock, flags);
+-}
+-
+-static int macb_mdio_read(struct net_device *dev, int phy_id, int location)
+-{
+-	struct macb *bp = netdev_priv(dev);
++	struct macb *bp = bus->priv;
+ 	int value;
+ 
+-	mutex_lock(&bp->mdio_mutex);
+-
+-	macb_enable_mdio(bp);
+ 	macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
+ 			      | MACB_BF(RW, MACB_MAN_READ)
+-			      | MACB_BF(PHYA, phy_id)
+-			      | MACB_BF(REGA, location)
++			      | MACB_BF(PHYA, mii_id)
++			      | MACB_BF(REGA, regnum)
+ 			      | MACB_BF(CODE, MACB_MAN_CODE)));
+ 
+-	wait_for_completion(&bp->mdio_complete);
++	/* wait for end of transfer */
++	while (!MACB_BFEXT(IDLE, macb_readl(bp, NSR)))
++		cpu_relax();
+ 
+ 	value = MACB_BFEXT(DATA, macb_readl(bp, MAN));
+-	macb_disable_mdio(bp);
+-	mutex_unlock(&bp->mdio_mutex);
+ 
+ 	return value;
+ }
+ 
+-static void macb_mdio_write(struct net_device *dev, int phy_id,
+-			    int location, int val)
++static int macb_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
++			   u16 value)
+ {
+-	struct macb *bp = netdev_priv(dev);
++	struct macb *bp = bus->priv;
+ 
+-	dev_dbg(&bp->pdev->dev, "mdio_write %02x:%02x <- %04x\n",
+-		phy_id, location, val);
+-
+-	mutex_lock(&bp->mdio_mutex);
+-	macb_enable_mdio(bp);
+-
+ 	macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
+ 			      | MACB_BF(RW, MACB_MAN_WRITE)
+-			      | MACB_BF(PHYA, phy_id)
+-			      | MACB_BF(REGA, location)
++			      | MACB_BF(PHYA, mii_id)
++			      | MACB_BF(REGA, regnum)
+ 			      | MACB_BF(CODE, MACB_MAN_CODE)
+-			      | MACB_BF(DATA, val)));
++			      | MACB_BF(DATA, value)));
+ 
+-	wait_for_completion(&bp->mdio_complete);
++	/* wait for end of transfer */
++	while (!MACB_BFEXT(IDLE, macb_readl(bp, NSR)))
++		cpu_relax();
+ 
+-	macb_disable_mdio(bp);
+-	mutex_unlock(&bp->mdio_mutex);
++	return 0;
+ }
+ 
+-static int macb_phy_probe(struct macb *bp)
++static int macb_mdio_reset(struct mii_bus *bus)
+ {
+-	int phy_address;
+-	u16 phyid1, phyid2;
++	return 0;
++}
+ 
+-	for (phy_address = 0; phy_address < 32; phy_address++) {
+-		phyid1 = macb_mdio_read(bp->dev, phy_address, MII_PHYSID1);
+-		phyid2 = macb_mdio_read(bp->dev, phy_address, MII_PHYSID2);
++static void macb_handle_link_change(struct net_device *dev)
++{
++	struct macb *bp = netdev_priv(dev);
++	struct phy_device *phydev = bp->phy_dev;
++	unsigned long flags;
+ 
+-		if (phyid1 != 0xffff && phyid1 != 0x0000
+-		    && phyid2 != 0xffff && phyid2 != 0x0000)
+-			break;
++	int status_change = 0;
++
++	spin_lock_irqsave(&bp->lock, flags);
++
++	if (phydev->link) {
++		if ((bp->speed != phydev->speed) ||
++		    (bp->duplex != phydev->duplex)) {
++			u32 reg;
++
++			reg = macb_readl(bp, NCFGR);
++			reg &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
++
++			if (phydev->duplex)
++				reg |= MACB_BIT(FD);
++			if (phydev->speed)
++				reg |= MACB_BIT(SPD);
++
++			macb_writel(bp, NCFGR, reg);
++
++			bp->speed = phydev->speed;
++			bp->duplex = phydev->duplex;
++			status_change = 1;
++		}
+ 	}
+ 
+-	if (phy_address == 32)
+-		return -ENODEV;
++	if (phydev->link != bp->link) {
++		if (phydev->link)
++			netif_schedule(dev);
++		else {
++			bp->speed = 0;
++			bp->duplex = -1;
++		}
++		bp->link = phydev->link;
+ 
+-	dev_info(&bp->pdev->dev,
+-		 "detected PHY at address %d (ID %04x:%04x)\n",
+-		 phy_address, phyid1, phyid2);
++		status_change = 1;
++	}
+ 
+-	bp->mii.phy_id = phy_address;
+-	return 0;
++	spin_unlock_irqrestore(&bp->lock, flags);
++
++	if (status_change) {
++		if (phydev->link)
++			printk(KERN_INFO "%s: link up (%d/%s)\n",
++			       dev->name, phydev->speed,
++			       DUPLEX_FULL == phydev->duplex ? "Full":"Half");
++		else
++			printk(KERN_INFO "%s: link down\n", dev->name);
++	}
+ }
+ 
+-static void macb_set_media(struct macb *bp, int media)
++/* based on au1000_eth. c*/
++static int macb_mii_probe(struct net_device *dev)
+ {
+-	u32 reg;
++	struct macb *bp = netdev_priv(dev);
++	struct phy_device *phydev = NULL;
++	struct eth_platform_data *pdata;
++	int phy_addr;
+ 
+-	spin_lock_irq(&bp->lock);
+-	reg = macb_readl(bp, NCFGR);
+-	reg &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
+-	if (media & (ADVERTISE_100HALF | ADVERTISE_100FULL))
+-		reg |= MACB_BIT(SPD);
+-	if (media & ADVERTISE_FULL)
+-		reg |= MACB_BIT(FD);
+-	macb_writel(bp, NCFGR, reg);
+-	spin_unlock_irq(&bp->lock);
++	/* find the first phy */
++	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
++		if (bp->mii_bus.phy_map[phy_addr]) {
++			phydev = bp->mii_bus.phy_map[phy_addr];
++			break;
++		}
++	}
++
++	if (!phydev) {
++		printk (KERN_ERR "%s: no PHY found\n", dev->name);
++		return -1;
++	}
++
++	pdata = bp->pdev->dev.platform_data;
++	/* TODO : add pin_irq */
++
++	/* attach the mac to the phy */
++	if (pdata && pdata->is_rmii) {
++		phydev = phy_connect(dev, phydev->dev.bus_id,
++			&macb_handle_link_change, 0, PHY_INTERFACE_MODE_RMII);
++	} else {
++		phydev = phy_connect(dev, phydev->dev.bus_id,
++			&macb_handle_link_change, 0, PHY_INTERFACE_MODE_MII);
++	}
++
++	if (IS_ERR(phydev)) {
++		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
++		return PTR_ERR(phydev);
++	}
++
++	/* mask with MAC supported features */
++	phydev->supported &= PHY_BASIC_FEATURES;
++
++	phydev->advertising = phydev->supported;
++
++	bp->link = 0;
++	bp->speed = 0;
++	bp->duplex = -1;
++	bp->phy_dev = phydev;
++
++	return 0;
+ }
+ 
+-static void macb_check_media(struct macb *bp, int ok_to_print, int init_media)
++static int macb_mii_init(struct macb *bp)
+ {
+-	struct mii_if_info *mii = &bp->mii;
+-	unsigned int old_carrier, new_carrier;
+-	int advertise, lpa, media, duplex;
++	struct eth_platform_data *pdata;
++	int err = -ENXIO, i;
+ 
+-	/* if forced media, go no further */
+-	if (mii->force_media)
+-		return;
++	/* Enable managment port */
++	macb_writel(bp, NCR, MACB_BIT(MPE));
+ 
+-	/* check current and old link status */
+-	old_carrier = netif_carrier_ok(mii->dev) ? 1 : 0;
+-	new_carrier = (unsigned int) mii_link_ok(mii);
++	bp->mii_bus.name = "MACB_mii_bus",
++	bp->mii_bus.read = &macb_mdio_read,
++	bp->mii_bus.write = &macb_mdio_write,
++	bp->mii_bus.reset = &macb_mdio_reset,
++	bp->mii_bus.id = bp->pdev->id,
++	bp->mii_bus.priv = bp,
++	bp->mii_bus.dev = &bp->dev->dev;
++	pdata = bp->pdev->dev.platform_data;
+ 
+-	/* if carrier state did not change, assume nothing else did */
+-	if (!init_media && old_carrier == new_carrier)
+-		return;
++	if (pdata)
++		bp->mii_bus.phy_mask = pdata->phy_mask;
+ 
+-	/* no carrier, nothing much to do */
+-	if (!new_carrier) {
+-		netif_carrier_off(mii->dev);
+-		printk(KERN_INFO "%s: link down\n", mii->dev->name);
+-		return;
++	bp->mii_bus.irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
++	if (!bp->mii_bus.irq) {
++		err = -ENOMEM;
++		goto err_out;
+ 	}
+ 
+-	/*
+-	 * we have carrier, see who's on the other end
+-	 */
+-	netif_carrier_on(mii->dev);
++	for (i = 0; i < PHY_MAX_ADDR; i++)
++		bp->mii_bus.irq[i] = PHY_POLL;
+ 
+-	/* get MII advertise and LPA values */
+-	if (!init_media && mii->advertising) {
+-		advertise = mii->advertising;
+-	} else {
+-		advertise = mii->mdio_read(mii->dev, mii->phy_id, MII_ADVERTISE);
+-		mii->advertising = advertise;
+-	}
+-	lpa = mii->mdio_read(mii->dev, mii->phy_id, MII_LPA);
++	platform_set_drvdata(bp->dev, &bp->mii_bus);
+ 
+-	/* figure out media and duplex from advertise and LPA values */
+-	media = mii_nway_result(lpa & advertise);
+-	duplex = (media & ADVERTISE_FULL) ? 1 : 0;
++	if (mdiobus_register(&bp->mii_bus))
++		goto err_out_free_mdio_irq;
+ 
+-	if (ok_to_print)
+-		printk(KERN_INFO "%s: link up, %sMbps, %s-duplex, lpa 0x%04X\n",
+-		       mii->dev->name,
+-		       media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ? "100" : "10",
+-		       duplex ? "full" : "half", lpa);
++	if (macb_mii_probe(bp->dev) != 0) {
++		goto err_out_unregister_bus;
++	}
+ 
+-	mii->full_duplex = duplex;
++	return 0;
+ 
+-	/* Let the MAC know about the new link state */
+-	macb_set_media(bp, media);
++err_out_unregister_bus:
++	mdiobus_unregister(&bp->mii_bus);
++err_out_free_mdio_irq:
++	kfree(bp->mii_bus.irq);
++err_out:
++	return err;
+ }
+ 
+ static void macb_update_stats(struct macb *bp)
+@@ -265,16 +296,6 @@
+ 		*p += __raw_readl(reg);
+ }
+ 
+-static void macb_periodic_task(struct work_struct *work)
+-{
+-	struct macb *bp = container_of(work, struct macb, periodic_task.work);
+-
+-	macb_update_stats(bp);
+-	macb_check_media(bp, 1, 0);
+-
+-	schedule_delayed_work(&bp->periodic_task, HZ);
+-}
+-
+ static void macb_tx(struct macb *bp)
+ {
+ 	unsigned int tail;
+@@ -519,9 +540,6 @@
+ 	spin_lock(&bp->lock);
+ 
+ 	while (status) {
+-		if (status & MACB_BIT(MFD))
+-			complete(&bp->mdio_complete);
+-
+ 		/* close possible race with dev_close */
+ 		if (unlikely(!netif_running(dev))) {
+ 			macb_writel(bp, IDR, ~0UL);
+@@ -535,7 +553,8 @@
+ 				 * until we have processed the buffers
+ 				 */
+ 				macb_writel(bp, IDR, MACB_RX_INT_FLAGS);
+-				dev_dbg(&bp->pdev->dev, "scheduling RX softirq\n");
++				dev_dbg(&bp->pdev->dev,
++					"scheduling RX softirq\n");
+ 				__netif_rx_schedule(dev);
+ 			}
+ 		}
+@@ -765,7 +784,7 @@
+ 	macb_writel(bp, TBQP, bp->tx_ring_dma);
+ 
+ 	/* Enable TX and RX */
+-	macb_writel(bp, NCR, MACB_BIT(RE) | MACB_BIT(TE));
++	macb_writel(bp, NCR, MACB_BIT(RE) | MACB_BIT(TE) | MACB_BIT(MPE));
+ 
+ 	/* Enable interrupts */
+ 	macb_writel(bp, IER, (MACB_BIT(RCOMP)
+@@ -776,20 +795,128 @@
+ 			      | MACB_BIT(TCOMP)
+ 			      | MACB_BIT(ISR_ROVR)
+ 			      | MACB_BIT(HRESP)));
++
+ }
+ 
+-static void macb_init_phy(struct net_device *dev)
++/*
++ * The hash address register is 64 bits long and takes up two
++ * locations in the memory map.  The least significant bits are stored
++ * in EMAC_HSL and the most significant bits in EMAC_HSH.
++ *
++ * The unicast hash enable and the multicast hash enable bits in the
++ * network configuration register enable the reception of hash matched
++ * frames. The destination address is reduced to a 6 bit index into
++ * the 64 bit hash register using the following hash function.  The
++ * hash function is an exclusive or of every sixth bit of the
++ * destination address.
++ *
++ * hi[5] = da[5] ^ da[11] ^ da[17] ^ da[23] ^ da[29] ^ da[35] ^ da[41] ^ da[47]
++ * hi[4] = da[4] ^ da[10] ^ da[16] ^ da[22] ^ da[28] ^ da[34] ^ da[40] ^ da[46]
++ * hi[3] = da[3] ^ da[09] ^ da[15] ^ da[21] ^ da[27] ^ da[33] ^ da[39] ^ da[45]
++ * hi[2] = da[2] ^ da[08] ^ da[14] ^ da[20] ^ da[26] ^ da[32] ^ da[38] ^ da[44]
++ * hi[1] = da[1] ^ da[07] ^ da[13] ^ da[19] ^ da[25] ^ da[31] ^ da[37] ^ da[43]
++ * hi[0] = da[0] ^ da[06] ^ da[12] ^ da[18] ^ da[24] ^ da[30] ^ da[36] ^ da[42]
++ *
++ * da[0] represents the least significant bit of the first byte
++ * received, that is, the multicast/unicast indicator, and da[47]
++ * represents the most significant bit of the last byte received.  If
++ * the hash index, hi[n], points to a bit that is set in the hash
++ * register then the frame will be matched according to whether the
++ * frame is multicast or unicast.  A multicast match will be signalled
++ * if the multicast hash enable bit is set, da[0] is 1 and the hash
++ * index points to a bit set in the hash register.  A unicast match
++ * will be signalled if the unicast hash enable bit is set, da[0] is 0
++ * and the hash index points to a bit set in the hash register.  To
++ * receive all multicast frames, the hash register should be set with
++ * all ones and the multicast hash enable bit should be set in the
++ * network configuration register.
++ */
++
++static inline int hash_bit_value(int bitnr, __u8 *addr)
+ {
++	if (addr[bitnr / 8] & (1 << (bitnr % 8)))
++		return 1;
++	return 0;
++}
++
++/*
++ * Return the hash index value for the specified address.
++ */
++static int hash_get_index(__u8 *addr)
++{
++	int i, j, bitval;
++	int hash_index = 0;
++
++	for (j = 0; j < 6; j++) {
++		for (i = 0, bitval = 0; i < 8; i++)
++			bitval ^= hash_bit_value(i*6 + j, addr);
++
++		hash_index |= (bitval << j);
++	}
++
++	return hash_index;
++}
++
++/*
++ * Add multicast addresses to the internal multicast-hash table.
++ */
++static void macb_sethashtable(struct net_device *dev)
++{
++	struct dev_mc_list *curr;
++	unsigned long mc_filter[2];
++	unsigned int i, bitnr;
+ 	struct macb *bp = netdev_priv(dev);
+ 
+-	/* Set some reasonable default settings */
+-	macb_mdio_write(dev, bp->mii.phy_id, MII_ADVERTISE,
+-			ADVERTISE_CSMA | ADVERTISE_ALL);
+-	macb_mdio_write(dev, bp->mii.phy_id, MII_BMCR,
+-			(BMCR_SPEED100 | BMCR_ANENABLE
+-			 | BMCR_ANRESTART | BMCR_FULLDPLX));
++	mc_filter[0] = mc_filter[1] = 0;
++
++	curr = dev->mc_list;
++	for (i = 0; i < dev->mc_count; i++, curr = curr->next) {
++		if (!curr) break;	/* unexpected end of list */
++
++		bitnr = hash_get_index(curr->dmi_addr);
++		mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
++	}
++
++	macb_writel(bp, HRB, mc_filter[0]);
++	macb_writel(bp, HRT, mc_filter[1]);
+ }
+ 
++/*
++ * Enable/Disable promiscuous and multicast modes.
++ */
++static void macb_set_rx_mode(struct net_device *dev)
++{
++	unsigned long cfg;
++	struct macb *bp = netdev_priv(dev);
++
++	cfg = macb_readl(bp, NCFGR);
++
++	if (dev->flags & IFF_PROMISC)
++		/* Enable promiscuous mode */
++		cfg |= MACB_BIT(CAF);
++	else if (dev->flags & (~IFF_PROMISC))
++		 /* Disable promiscuous mode */
++		cfg &= ~MACB_BIT(CAF);
++
++	if (dev->flags & IFF_ALLMULTI) {
++		/* Enable all multicast mode */
++		macb_writel(bp, HRB, -1);
++		macb_writel(bp, HRT, -1);
++		cfg |= MACB_BIT(NCFGR_MTI);
++	} else if (dev->mc_count > 0) {
++		/* Enable specific multicasts */
++		macb_sethashtable(dev);
++		cfg |= MACB_BIT(NCFGR_MTI);
++	} else if (dev->flags & (~IFF_ALLMULTI)) {
++		/* Disable all multicast mode */
++		macb_writel(bp, HRB, 0);
++		macb_writel(bp, HRT, 0);
++		cfg &= ~MACB_BIT(NCFGR_MTI);
++	}
++
++	macb_writel(bp, NCFGR, cfg);
++}
++
+ static int macb_open(struct net_device *dev)
+ {
+ 	struct macb *bp = netdev_priv(dev);
+@@ -797,6 +924,10 @@
+ 
+ 	dev_dbg(&bp->pdev->dev, "open\n");
+ 
++	/* if the phy is not yet register, retry later*/
++	if (!bp->phy_dev)
++		return -EAGAIN;
++
+ 	if (!is_valid_ether_addr(dev->dev_addr))
+ 		return -EADDRNOTAVAIL;
+ 
+@@ -810,13 +941,12 @@
+ 
+ 	macb_init_rings(bp);
+ 	macb_init_hw(bp);
+-	macb_init_phy(dev);
+ 
+-	macb_check_media(bp, 1, 1);
++	/* schedule a link state check */
++	phy_start(bp->phy_dev);
++
+ 	netif_start_queue(dev);
+ 
+-	schedule_delayed_work(&bp->periodic_task, HZ);
+-
+ 	return 0;
+ }
+ 
+@@ -825,10 +955,11 @@
+ 	struct macb *bp = netdev_priv(dev);
+ 	unsigned long flags;
+ 
+-	cancel_rearming_delayed_work(&bp->periodic_task);
+-
+ 	netif_stop_queue(dev);
+ 
++	if (bp->phy_dev)
++		phy_stop(bp->phy_dev);
++
+ 	spin_lock_irqsave(&bp->lock, flags);
+ 	macb_reset_hw(bp);
+ 	netif_carrier_off(dev);
+@@ -845,6 +976,9 @@
+ 	struct net_device_stats *nstat = &bp->stats;
+ 	struct macb_stats *hwstat = &bp->hw_stats;
+ 
++	/* read stats from hardware */
++	macb_update_stats(bp);
++
+ 	/* Convert HW stats into netdevice stats */
+ 	nstat->rx_errors = (hwstat->rx_fcs_errors +
+ 			    hwstat->rx_align_errors +
+@@ -882,18 +1016,27 @@
+ static int macb_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ 	struct macb *bp = netdev_priv(dev);
++	struct phy_device *phydev = bp->phy_dev;
+ 
+-	return mii_ethtool_gset(&bp->mii, cmd);
++	if (!phydev)
++		return -ENODEV;
++
++	return phy_ethtool_gset(phydev, cmd);
+ }
+ 
+ static int macb_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ 	struct macb *bp = netdev_priv(dev);
++	struct phy_device *phydev = bp->phy_dev;
+ 
+-	return mii_ethtool_sset(&bp->mii, cmd);
++	if (!phydev)
++		return -ENODEV;
++
++	return phy_ethtool_sset(phydev, cmd);
+ }
+ 
+-static void macb_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
++static void macb_get_drvinfo(struct net_device *dev,
++			     struct ethtool_drvinfo *info)
+ {
+ 	struct macb *bp = netdev_priv(dev);
+ 
+@@ -902,104 +1045,34 @@
+ 	strcpy(info->bus_info, bp->pdev->dev.bus_id);
+ }
+ 
+-static int macb_nway_reset(struct net_device *dev)
+-{
+-	struct macb *bp = netdev_priv(dev);
+-	return mii_nway_restart(&bp->mii);
+-}
+-
+ static struct ethtool_ops macb_ethtool_ops = {
+ 	.get_settings		= macb_get_settings,
+ 	.set_settings		= macb_set_settings,
+ 	.get_drvinfo		= macb_get_drvinfo,
+-	.nway_reset		= macb_nway_reset,
+ 	.get_link		= ethtool_op_get_link,
  };
  
- static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
-@@ -252,6 +253,7 @@ static void atmel_break_ctl(struct uart_port *port, int break_state)
-  */
- static void atmel_rx_chars(struct uart_port *port)
+ static int macb_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
  {
-+	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
- 	struct tty_struct *tty = port->info->tty;
- 	unsigned int status, ch, flg;
+ 	struct macb *bp = netdev_priv(dev);
++	struct phy_device *phydev = bp->phy_dev;
  
-@@ -267,13 +269,29 @@ static void atmel_rx_chars(struct uart_port *port)
- 		 * note that the error handling code is
- 		 * out of the main execution path
- 		 */
--		if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME | ATMEL_US_OVRE | ATMEL_US_RXBRK))) {
-+		if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
-+				       | ATMEL_US_OVRE | ATMEL_US_RXBRK)
-+			     || atmel_port->break_active)) {
- 			UART_PUT_CR(port, ATMEL_US_RSTSTA);	/* clear error */
--			if (status & ATMEL_US_RXBRK) {
-+			if (status & ATMEL_US_RXBRK
-+			    && !atmel_port->break_active) {
- 				status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);	/* ignore side-effect */
- 				port->icount.brk++;
-+				atmel_port->break_active = 1;
-+				UART_PUT_IER(port, ATMEL_US_RXBRK);
- 				if (uart_handle_break(port))
- 					goto ignore_char;
-+			} else {
-+				/*
-+				 * This is either the end-of-break
-+				 * condition or we've received at
-+				 * least one character without RXBRK
-+				 * being set. In both cases, the next
-+				 * RXBRK will indicate start-of-break.
-+				 */
-+				UART_PUT_IDR(port, ATMEL_US_RXBRK);
-+				status &= ~ATMEL_US_RXBRK;
-+				atmel_port->break_active = 0;
- 			}
- 			if (status & ATMEL_US_PARE)
- 				port->icount.parity++;
-@@ -352,6 +370,16 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id)
- 		/* Interrupt receive */
- 		if (pending & ATMEL_US_RXRDY)
- 			atmel_rx_chars(port);
-+		else if (pending & ATMEL_US_RXBRK) {
-+			/*
-+			 * End of break detected. If it came along
-+			 * with a character, atmel_rx_chars will
-+			 * handle it.
-+			 */
-+			UART_PUT_CR(port, ATMEL_US_RSTSTA);
-+			UART_PUT_IDR(port, ATMEL_US_RXBRK);
-+			atmel_port->break_active = 0;
+ 	if (!netif_running(dev))
+ 		return -EINVAL;
+ 
+-	return generic_mii_ioctl(&bp->mii, if_mii(rq), cmd, NULL);
+-}
++	if (!phydev)
++		return -ENODEV;
+ 
+-static ssize_t macb_mii_show(const struct device *_dev, char *buf,
+-			unsigned long addr)
+-{
+-	struct net_device *dev = to_net_dev(_dev);
+-	struct macb *bp = netdev_priv(dev);
+-	ssize_t ret = -EINVAL;
+-
+-	if (netif_running(dev)) {
+-		int value;
+-		value = macb_mdio_read(dev, bp->mii.phy_id, addr);
+-		ret = sprintf(buf, "0x%04x\n", (uint16_t)value);
+-	}
+-
+-	return ret;
++	return phy_mii_ioctl(phydev, if_mii(rq), cmd);
+ }
+ 
+-#define MII_ENTRY(name, addr)					\
+-static ssize_t show_##name(struct device *_dev,			\
+-			   struct device_attribute *attr,	\
+-			   char *buf)				\
+-{								\
+-	return macb_mii_show(_dev, buf, addr);			\
+-}								\
+-static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL)
+-
+-MII_ENTRY(bmcr, MII_BMCR);
+-MII_ENTRY(bmsr, MII_BMSR);
+-MII_ENTRY(physid1, MII_PHYSID1);
+-MII_ENTRY(physid2, MII_PHYSID2);
+-MII_ENTRY(advertise, MII_ADVERTISE);
+-MII_ENTRY(lpa, MII_LPA);
+-MII_ENTRY(expansion, MII_EXPANSION);
+-
+-static struct attribute *macb_mii_attrs[] = {
+-	&dev_attr_bmcr.attr,
+-	&dev_attr_bmsr.attr,
+-	&dev_attr_physid1.attr,
+-	&dev_attr_physid2.attr,
+-	&dev_attr_advertise.attr,
+-	&dev_attr_lpa.attr,
+-	&dev_attr_expansion.attr,
+-	NULL,
+-};
+-
+-static struct attribute_group macb_mii_group = {
+-	.name	= "mii",
+-	.attrs	= macb_mii_attrs,
+-};
+-
+-static void macb_unregister_sysfs(struct net_device *net)
+-{
+-	struct device *_dev = &net->dev;
+-
+-	sysfs_remove_group(&_dev->kobj, &macb_mii_group);
+-}
+-
+-static int macb_register_sysfs(struct net_device *net)
+-{
+-	struct device *_dev = &net->dev;
+-	int ret;
+-
+-	ret = sysfs_create_group(&_dev->kobj, &macb_mii_group);
+-	if (ret)
+-		printk(KERN_WARNING
+-		       "%s: sysfs mii attribute registration failed: %d\n",
+-		       net->name, ret);
+-	return ret;
+-}
+ static int __devinit macb_probe(struct platform_device *pdev)
+ {
+ 	struct eth_platform_data *pdata;
+ 	struct resource *regs;
+ 	struct net_device *dev;
+ 	struct macb *bp;
++	struct phy_device *phydev;
+ 	unsigned long pclk_hz;
+ 	u32 config;
+ 	int err = -ENXIO;
+@@ -1073,6 +1146,7 @@
+ 	dev->stop = macb_close;
+ 	dev->hard_start_xmit = macb_start_xmit;
+ 	dev->get_stats = macb_get_stats;
++	dev->set_multicast_list = macb_set_rx_mode;
+ 	dev->do_ioctl = macb_ioctl;
+ 	dev->poll = macb_poll;
+ 	dev->weight = 64;
+@@ -1080,10 +1154,6 @@
+ 
+ 	dev->base_addr = regs->start;
+ 
+-	INIT_DELAYED_WORK(&bp->periodic_task, macb_periodic_task);
+-	mutex_init(&bp->mdio_mutex);
+-	init_completion(&bp->mdio_complete);
+-
+ 	/* Set MII management clock divider */
+ 	pclk_hz = clk_get_rate(bp->pclk);
+ 	if (pclk_hz <= 20000000)
+@@ -1096,20 +1166,9 @@
+ 		config = MACB_BF(CLK, MACB_CLK_DIV64);
+ 	macb_writel(bp, NCFGR, config);
+ 
+-	bp->mii.dev = dev;
+-	bp->mii.mdio_read = macb_mdio_read;
+-	bp->mii.mdio_write = macb_mdio_write;
+-	bp->mii.phy_id_mask = 0x1f;
+-	bp->mii.reg_num_mask = 0x1f;
+-
+ 	macb_get_hwaddr(bp);
+-	err = macb_phy_probe(bp);
+-	if (err) {
+-		dev_err(&pdev->dev, "Failed to detect PHY, aborting.\n");
+-		goto err_out_free_irq;
+-	}
++	pdata = pdev->dev.platform_data;
+ 
+-	pdata = pdev->dev.platform_data;
+ 	if (pdata && pdata->is_rmii)
+ #if defined(CONFIG_ARCH_AT91)
+ 		macb_writel(bp, USRIO, (MACB_BIT(RMII) | MACB_BIT(CLKEN)) );
+@@ -1131,18 +1190,27 @@
+ 		goto err_out_free_irq;
+ 	}
+ 
++	if (macb_mii_init(bp) != 0) {
++		goto err_out_unregister_netdev;
++	}
++
+ 	platform_set_drvdata(pdev, dev);
+ 
+-	macb_register_sysfs(dev);
+-
+ 	printk(KERN_INFO "%s: Atmel MACB at 0x%08lx irq %d "
+ 	       "(%02x:%02x:%02x:%02x:%02x:%02x)\n",
+ 	       dev->name, dev->base_addr, dev->irq,
+ 	       dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
+ 	       dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
+ 
++	phydev = bp->phy_dev;
++	printk(KERN_INFO "%s: attached PHY driver [%s] "
++		"(mii_bus:phy_addr=%s, irq=%d)\n",
++		dev->name, phydev->drv->name, phydev->dev.bus_id, phydev->irq);
++
+ 	return 0;
+ 
++err_out_unregister_netdev:
++	unregister_netdev(dev);
+ err_out_free_irq:
+ 	free_irq(dev->irq, dev);
+ err_out_iounmap:
+@@ -1153,7 +1221,9 @@
+ 	clk_put(bp->hclk);
+ #endif
+ 	clk_disable(bp->pclk);
++#ifndef CONFIG_ARCH_AT91
+ err_out_put_pclk:
++#endif
+ 	clk_put(bp->pclk);
+ err_out_free_dev:
+ 	free_netdev(dev);
+@@ -1171,7 +1241,8 @@
+ 
+ 	if (dev) {
+ 		bp = netdev_priv(dev);
+-		macb_unregister_sysfs(dev);
++		mdiobus_unregister(&bp->mii_bus);
++		kfree(bp->mii_bus.irq);
+ 		unregister_netdev(dev);
+ 		free_irq(dev->irq, dev);
+ 		iounmap(bp->regs);
+Index: linux-2.6.22.1/drivers/net/macb.h
+===================================================================
+--- linux-2.6.22.1/drivers/net/macb.h	(revision 1)
++++ linux-2.6.22.1/drivers/net/macb.h	(arbetskopia)
+@@ -383,11 +383,11 @@
+ 
+ 	unsigned int		rx_pending, tx_pending;
+ 
+-	struct delayed_work	periodic_task;
+-
+-	struct mutex		mdio_mutex;
+-	struct completion	mdio_complete;
+-	struct mii_if_info	mii;
++	struct mii_bus		mii_bus;
++	struct phy_device	*phy_dev;
++	unsigned int 		link;
++	unsigned int 		speed;
++	unsigned int 		duplex;
+ };
+ 
+ #endif /* _MACB_H */
+Index: linux-2.6.22.1/drivers/net/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/net/Kconfig	(revision 1)
++++ linux-2.6.22.1/drivers/net/Kconfig	(arbetskopia)
+@@ -191,7 +191,7 @@
+ config MACB
+ 	tristate "Atmel MACB support"
+ 	depends on NET_ETHERNET && (AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263)
+-	select MII
++	select PHYLIB
+ 	help
+ 	  The Atmel MACB ethernet interface is found on many AT32 and AT91
+ 	  parts. Say Y to include support for the MACB chip.
+Index: linux-2.6.22.1/drivers/net/arm/at91_ether.c
+===================================================================
+--- linux-2.6.22.1/drivers/net/arm/at91_ether.c	(revision 1)
++++ linux-2.6.22.1/drivers/net/arm/at91_ether.c	(arbetskopia)
+@@ -894,6 +894,7 @@
+ 			skb_reserve(skb, 2);
+ 			memcpy(skb_put(skb, pktlen), p_recv, pktlen);
+ 
++			skb->dev = dev;
+ 			skb->protocol = eth_type_trans(skb, dev);
+ 			dev->last_rx = jiffies;
+ 			lp->stats.rx_bytes += pktlen;
+@@ -978,14 +979,22 @@
+ 	struct net_device *dev;
+ 	struct at91_private *lp;
+ 	unsigned int val;
+-	int res;
++	struct resource *res;
++	int ret;
+ 
+ 	dev = alloc_etherdev(sizeof(struct at91_private));
+ 	if (!dev)
+ 		return -ENOMEM;
+ 
+-	dev->base_addr = AT91_VA_BASE_EMAC;
+-	dev->irq = AT91RM9200_ID_EMAC;
++	/* Get I/O base address and IRQ */
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res) {
++		free_netdev(dev);
++		return -ENODEV;
++	}
++	dev->base_addr = res->start;
++	dev->irq = platform_get_irq(pdev, 0);
++
+ 	SET_MODULE_OWNER(dev);
+ 
+ 	/* Install the interrupt handler */
+@@ -1058,12 +1067,12 @@
+ 	lp->phy_address = phy_address;	/* MDI address of PHY */
+ 
+ 	/* Register the network interface */
+-	res = register_netdev(dev);
+-	if (res) {
++	ret = register_netdev(dev);
++	if (ret) {
+ 		free_irq(dev->irq, dev);
+ 		free_netdev(dev);
+ 		dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
+-		return res;
++		return ret;
+ 	}
+ 
+ 	/* Determine current link speed */
+Index: linux-2.6.22.1/drivers/leds/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/leds/Kconfig	(revision 1)
++++ linux-2.6.22.1/drivers/leds/Kconfig	(arbetskopia)
+@@ -77,6 +77,13 @@
+ 	  This option enables support for the Soekris net4801 and net4826 error
+ 	  LED.
+ 
++config LEDS_AT91
++	tristate "LED support using AT91 GPIOs"
++	depends on LEDS_CLASS && ARCH_AT91 && !LEDS
++	help
++	  This option enables support for LEDs connected to GPIO lines
++	  on AT91-based boards.
++
+ config LEDS_WRAP
+ 	tristate "LED Support for the WRAP series LEDs"
+ 	depends on LEDS_CLASS && SCx200_GPIO
+@@ -95,6 +102,14 @@
+ 	help
+ 	  This option enables support for the front LED on Cobalt Server
+ 
++config LEDS_GPIO
++	tristate "LED Support for GPIO connected LEDs"
++	depends on LEDS_CLASS && GENERIC_GPIO
++	help
++	  This option enables support for the LEDs connected to GPIO
++	  outputs. To be useful the particular board must have LEDs
++	  and they must be connected to the GPIO lines.
++
+ comment "LED Triggers"
+ 
+ config LEDS_TRIGGERS
+Index: linux-2.6.22.1/drivers/leds/leds-at91.c
+===================================================================
+--- linux-2.6.22.1/drivers/leds/leds-at91.c	(revision 0)
++++ linux-2.6.22.1/drivers/leds/leds-at91.c	(revision 0)
+@@ -0,0 +1,140 @@
++/*
++ * AT91 GPIO based LED driver
++ *
++ * Copyright (C) 2006 David Brownell
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++
++static LIST_HEAD(at91_led_list);	/* list of AT91 LEDs */
++
++struct at91_led {
++	struct led_classdev	cdev;
++	struct list_head	list;
++	struct at91_gpio_led	*led_data;
++};
++
++/*
++ * Change the state of the LED.
++ */
++static void at91_led_set(struct led_classdev *cdev, enum led_brightness value)
++{
++	struct at91_led	*led = container_of(cdev, struct at91_led, cdev);
++	short		active = (value == LED_OFF);
++
++	if (led->led_data->flags & 1)	/* active high/low? */
++		active = !active;
++	at91_set_gpio_value(led->led_data->gpio, active);
++}
++
++static int __devexit at91_led_remove(struct platform_device *pdev)
++{
++	struct at91_led		*led;
++
++	list_for_each_entry (led, &at91_led_list, list)
++		led_classdev_unregister(&led->cdev);
++
++#warning "Free allocated memory"
++	// TODO: Free memory.	kfree(led);
++
++	return 0;
++}
++
++static int __init at91_led_probe(struct platform_device *pdev)
++{
++	int			status = 0;
++	struct at91_gpio_led	*pdata = pdev->dev.platform_data;
++	unsigned		nr_leds;
++	struct at91_led		*led;
++
++	if (!pdata)
++		return -ENODEV;
++
++	nr_leds = pdata->index;		/* first index stores number of LEDs */
++
++	while (nr_leds--) {
++		led = kzalloc(sizeof(struct at91_led), GFP_KERNEL);
++		if (!led) {
++			dev_err(&pdev->dev, "No memory for device\n");
++			status = -ENOMEM;
++			goto cleanup;
 +		}
++		led->led_data = pdata;
++		led->cdev.name = pdata->name;
++		led->cdev.brightness_set = at91_led_set,
++		led->cdev.default_trigger = pdata->trigger;
++
++		status = led_classdev_register(&pdev->dev, &led->cdev);
++		if (status < 0) {
++			dev_err(&pdev->dev, "led_classdev_register failed - %d\n", status);
++cleanup:
++			at91_led_remove(pdev);
++			break;
++		}
++		list_add(&led->list, &at91_led_list);
++		pdata++;
++	}
++	return status;
++}
++
++#ifdef CONFIG_PM
++static int at91_led_suspend(struct platform_device *dev, pm_message_t state)
++{
++	struct at91_led	*led;
++
++	list_for_each_entry (led, &at91_led_list, list)
++		led_classdev_suspend(&led->cdev);
++
++	return 0;
++}
++
++static int at91_led_resume(struct platform_device *dev)
++{
++	struct at91_led	*led;
++
++	list_for_each_entry (led, &at91_led_list, list)
++		led_classdev_resume(&led->cdev);
++
++	return 0;
++}
++#else
++#define	at91_led_suspend	NULL
++#define	at91_led_resume		NULL
++#endif
++
++static struct platform_driver at91_led_driver = {
++	.probe		= at91_led_probe,
++	.remove		= __devexit_p(at91_led_remove),
++	.suspend	= at91_led_suspend,
++	.resume		= at91_led_resume,
++	.driver		= {
++		.name	= "at91_leds",
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init at91_led_init(void)
++{
++	return platform_driver_register(&at91_led_driver);
++}
++module_init(at91_led_init);
++
++static void __exit at91_led_exit(void)
++{
++	platform_driver_unregister(&at91_led_driver);
++}
++module_exit(at91_led_exit);
++
++MODULE_DESCRIPTION("AT91 GPIO LED driver");
++MODULE_AUTHOR("David Brownell");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.22.1/drivers/leds/leds-gpio.c
+===================================================================
+--- linux-2.6.22.1/drivers/leds/leds-gpio.c	(revision 0)
++++ linux-2.6.22.1/drivers/leds/leds-gpio.c	(revision 0)
+@@ -0,0 +1,199 @@
++/*
++ * LEDs driver for GPIOs
++ *
++ * Copyright (C) 2007 8D Technologies inc.
++ * Raphael Assenat <raph@8d.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <linux/workqueue.h>
++
++#include <asm/gpio.h>
++
++struct gpio_led_data {
++	struct led_classdev cdev;
++	unsigned gpio;
++	struct work_struct work;
++	u8 new_level;
++	u8 can_sleep;
++	u8 active_low;
++};
++
++static void gpio_led_work(struct work_struct *work)
++{
++	struct gpio_led_data	*led_dat =
++		container_of(work, struct gpio_led_data, work);
++
++	gpio_set_value_cansleep(led_dat->gpio, led_dat->new_level);
++}
++
++static void gpio_led_set(struct led_classdev *led_cdev,
++	enum led_brightness value)
++{
++	struct gpio_led_data *led_dat =
++		container_of(led_cdev, struct gpio_led_data, cdev);
++	int level;
++
++	if (value == LED_OFF)
++		level = 0;
++	else
++		level = 1;
++
++	if (led_dat->active_low)
++		level = !level;
++
++	/* setting GPIOs with I2C/etc requires a preemptible task context */
++	if (led_dat->can_sleep) {
++		if (preempt_count()) {
++			led_dat->new_level = level;
++			schedule_work(&led_dat->work);
++		} else
++			gpio_set_value_cansleep(led_dat->gpio, level);
++	} else
++		gpio_set_value(led_dat->gpio, level);
++}
++
++static int __init gpio_led_probe(struct platform_device *pdev)
++{
++	struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
++	struct gpio_led *cur_led;
++	struct gpio_led_data *leds_data, *led_dat;
++	int i, ret = 0;
++
++	if (!pdata)
++		return -EBUSY;
++
++	leds_data = kzalloc(sizeof(struct gpio_led_data) * pdata->num_leds,
++				GFP_KERNEL);
++	if (!leds_data)
++		return -ENOMEM;
++
++	for (i = 0; i < pdata->num_leds; i++) {
++		cur_led = &pdata->leds[i];
++		led_dat = &leds_data[i];
++
++		led_dat->cdev.name = cur_led->name;
++		led_dat->cdev.default_trigger = cur_led->default_trigger;
++		led_dat->gpio = cur_led->gpio;
++		led_dat->can_sleep = gpio_cansleep(cur_led->gpio);
++		led_dat->active_low = cur_led->active_low;
++		led_dat->cdev.brightness_set = gpio_led_set;
++		led_dat->cdev.brightness = cur_led->active_low ? LED_FULL : LED_OFF;
++
++		ret = gpio_request(led_dat->gpio, led_dat->cdev.name);
++		if (ret < 0)
++			goto err;
++
++		gpio_direction_output(led_dat->gpio, led_dat->active_low);
++
++		ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
++		if (ret < 0) {
++			gpio_free(led_dat->gpio);
++			goto err;
++		}
++
++		INIT_WORK(&led_dat->work, gpio_led_work);
++	}
++
++	platform_set_drvdata(pdev, leds_data);
++
++	return 0;
++
++err:
++	if (i > 0) {
++		for (i = i - 1; i >= 0; i--) {
++			led_classdev_unregister(&leds_data[i].cdev);
++			gpio_free(leds_data[i].gpio);
++		}
++	}
++
++	flush_scheduled_work();
++	kfree(leds_data);
++
++	return ret;
++}
++
++static int __exit gpio_led_remove(struct platform_device *pdev)
++{
++	int i;
++	struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
++	struct gpio_led_data *leds_data;
++
++	leds_data = platform_get_drvdata(pdev);
++
++	for (i = 0; i < pdata->num_leds; i++) {
++		led_classdev_unregister(&leds_data[i].cdev);
++		gpio_free(leds_data[i].gpio);
++	}
++	
++	kfree(leds_data);
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++static int gpio_led_suspend(struct platform_device *pdev, pm_message_t state)
++{
++	struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
++	struct gpio_led_data *leds_data;
++	int i;
++	
++	leds_data = platform_get_drvdata(pdev);
++
++	for (i = 0; i < pdata->num_leds; i++)
++		led_classdev_suspend(&leds_data[i].cdev);
++
++	return 0;
++}
++
++static int gpio_led_resume(struct platform_device *pdev)
++{
++	struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
++	struct gpio_led_data *leds_data;
++	int i;
++
++	leds_data = platform_get_drvdata(pdev);
++
++	for (i = 0; i < pdata->num_leds; i++)
++		led_classdev_resume(&leds_data[i].cdev);
++
++	return 0;
++}
++#else
++#define gpio_led_suspend NULL
++#define gpio_led_resume NULL
++#endif
++
++static struct platform_driver gpio_led_driver = {
++	.remove		= __exit_p(gpio_led_remove),
++	.suspend	= gpio_led_suspend,
++	.resume		= gpio_led_resume,
++	.driver		= {
++		.name	= "leds-gpio",
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init gpio_led_init(void)
++{
++	return platform_driver_probe(&gpio_led_driver, gpio_led_probe);
++}
++
++static void __exit gpio_led_exit(void)
++{
++	platform_driver_unregister(&gpio_led_driver);
++}
++
++module_init(gpio_led_init);
++module_exit(gpio_led_exit);
++
++MODULE_AUTHOR("Raphael Assenat <raph@8d.com>");
++MODULE_DESCRIPTION("GPIO LED driver");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.22.1/drivers/leds/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/leds/Makefile	(revision 1)
++++ linux-2.6.22.1/drivers/leds/Makefile	(arbetskopia)
+@@ -16,6 +16,8 @@
+ obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
+ obj-$(CONFIG_LEDS_H1940)		+= leds-h1940.o
+ obj-$(CONFIG_LEDS_COBALT)		+= leds-cobalt.o
++obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
++obj-$(CONFIG_LEDS_AT91)			+= leds-at91.o
  
- 		// TODO: All reads to CSR will clear these interrupts!
- 		if (pending & ATMEL_US_RIIC) port->icount.rng++;
-diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
-index 8b2601d..8f5453f 100644
---- a/drivers/spi/atmel_spi.c
-+++ b/drivers/spi/atmel_spi.c
-@@ -412,8 +412,8 @@ static int atmel_spi_setup(struct spi_device *spi)
- 		csr |= SPI_BIT(NCPHA);
- 
- 	/* TODO: DLYBS and DLYBCT */
--	csr |= SPI_BF(DLYBS, 10);
--	csr |= SPI_BF(DLYBCT, 10);
-+	csr |= SPI_BF(DLYBS, 0);
-+	csr |= SPI_BF(DLYBCT, 0);
- 
- 	/* chipselect must have been muxed as GPIO (e.g. in board setup) */
- 	npcs_pin = (unsigned int)spi->controller_data;
-diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
-index f771a7c..0c3d55b 100644
---- a/drivers/usb/gadget/Kconfig
-+++ b/drivers/usb/gadget/Kconfig
-@@ -175,6 +175,19 @@ config USB_LH7A40X
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
+Index: linux-2.6.22.1/drivers/usb/gadget/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/usb/gadget/Kconfig	(revision 1)
++++ linux-2.6.22.1/drivers/usb/gadget/Kconfig	(arbetskopia)
+@@ -175,7 +175,20 @@
  	default USB_GADGET
  	select USB_GADGET_SELECTED
  
@@ -9180,32 +21135,20 @@ index f771a7c..0c3d55b 100644
 +	help
 +	  USBA is the integrated high-speed USB Device controller on
 +	  the AT32AP700x processors from Atmel.
-+
+ 
 +config USB_ATMEL_USBA
 +	tristate
 +	depends on USB_GADGET_ATMEL_USBA
 +	default USB_GADGET
 +	select USB_GADGET_SELECTED
- 
++
  config USB_GADGET_OMAP
  	boolean "OMAP USB Device Controller"
-diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
-index 5db1939..c28da01 100644
---- a/drivers/usb/gadget/Makefile
-+++ b/drivers/usb/gadget/Makefile
-@@ -8,6 +8,7 @@ obj-$(CONFIG_USB_GOKU)		+= goku_udc.o
- obj-$(CONFIG_USB_OMAP)		+= omap_udc.o
- obj-$(CONFIG_USB_LH7A40X)	+= lh7a40x_udc.o
- obj-$(CONFIG_USB_AT91)		+= at91_udc.o
-+obj-$(CONFIG_USB_ATMEL_USBA)	+= atmel_usba_udc.o
- obj-$(CONFIG_USB_FSL_USB2)	+= fsl_usb2_udc.o
- 
- #
-diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
-new file mode 100644
-index 0000000..34dbae3
---- /dev/null
-+++ b/drivers/usb/gadget/atmel_usba_udc.c
+ 	depends on ARCH_OMAP
+Index: linux-2.6.22.1/drivers/usb/gadget/atmel_usba_udc.c
+===================================================================
+--- linux-2.6.22.1/drivers/usb/gadget/atmel_usba_udc.c	(revision 0)
++++ linux-2.6.22.1/drivers/usb/gadget/atmel_usba_udc.c	(revision 0)
 @@ -0,0 +1,2072 @@
 +/*
 + * Driver for the Atmel USBA high speed USB device controller
@@ -11279,11 +23222,36 @@ index 0000000..34dbae3
 +MODULE_DESCRIPTION("Atmel USBA UDC driver");
 +MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
 +MODULE_LICENSE("GPL");
-diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h
-new file mode 100644
-index 0000000..408d2ce
---- /dev/null
-+++ b/drivers/usb/gadget/atmel_usba_udc.h
+Index: linux-2.6.22.1/drivers/usb/gadget/ether.c
+===================================================================
+--- linux-2.6.22.1/drivers/usb/gadget/ether.c	(revision 1)
++++ linux-2.6.22.1/drivers/usb/gadget/ether.c	(arbetskopia)
+@@ -277,7 +277,7 @@
+ #define DEV_CONFIG_CDC
+ #endif
+ 
+-#ifdef CONFIG_USB_GADGET_HUSB2DEV
++#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+ #define DEV_CONFIG_CDC
+ #endif
+ 
+Index: linux-2.6.22.1/drivers/usb/gadget/at91_udc.c
+===================================================================
+--- linux-2.6.22.1/drivers/usb/gadget/at91_udc.c	(revision 1)
++++ linux-2.6.22.1/drivers/usb/gadget/at91_udc.c	(arbetskopia)
+@@ -1803,7 +1803,7 @@
+ 	 */
+ 	if ((!udc->suspended && udc->addr)
+ 			|| !wake
+-			|| at91_suspend_entering_slow_clock()) {
++			|| clk_must_disable(udc->fclk)) {
+ 		pullup(udc, 0);
+ 		wake = 0;
+ 	} else
+Index: linux-2.6.22.1/drivers/usb/gadget/atmel_usba_udc.h
+===================================================================
+--- linux-2.6.22.1/drivers/usb/gadget/atmel_usba_udc.h	(revision 0)
++++ linux-2.6.22.1/drivers/usb/gadget/atmel_usba_udc.h	(revision 0)
 @@ -0,0 +1,402 @@
 +/*
 + * Driver for the Atmel USBA high speed USB device controller
@@ -11687,23 +23655,10 @@ index 0000000..408d2ce
 +#define ep_is_idle(ep)		((ep)->state == EP_STATE_IDLE)
 +
 +#endif /* __LINUX_USB_GADGET_USBA_UDC_H */
-diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
-index 325bf7c..23e874b 100644
---- a/drivers/usb/gadget/ether.c
-+++ b/drivers/usb/gadget/ether.c
-@@ -277,7 +277,7 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
- #define DEV_CONFIG_CDC
- #endif
- 
--#ifdef CONFIG_USB_GADGET_HUSB2DEV
-+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
- #define DEV_CONFIG_CDC
- #endif
- 
-diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
-index d041b91..96e4dbc 100644
---- a/drivers/usb/gadget/gadget_chips.h
-+++ b/drivers/usb/gadget/gadget_chips.h
+Index: linux-2.6.22.1/drivers/usb/gadget/gadget_chips.h
+===================================================================
+--- linux-2.6.22.1/drivers/usb/gadget/gadget_chips.h	(revision 1)
++++ linux-2.6.22.1/drivers/usb/gadget/gadget_chips.h	(arbetskopia)
 @@ -75,10 +75,10 @@
  #define	gadget_is_pxa27x(g)	0
  #endif
@@ -11718,7 +23673,7 @@ index d041b91..96e4dbc 100644
  #endif
  
  #ifdef CONFIG_USB_GADGET_S3C2410
-@@ -181,7 +181,7 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
+@@ -181,7 +181,7 @@
  		return 0x16;
  	else if (gadget_is_mpc8272(gadget))
  		return 0x17;
@@ -11727,10 +23682,22 @@ index d041b91..96e4dbc 100644
  		return 0x18;
  	else if (gadget_is_fsl_usb2(gadget))
  		return 0x19;
-diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
-index 46d0e52..855f8cc 100644
---- a/drivers/usb/gadget/inode.c
-+++ b/drivers/usb/gadget/inode.c
+Index: linux-2.6.22.1/drivers/usb/gadget/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/usb/gadget/Makefile	(revision 1)
++++ linux-2.6.22.1/drivers/usb/gadget/Makefile	(arbetskopia)
+@@ -8,6 +8,7 @@
+ obj-$(CONFIG_USB_OMAP)		+= omap_udc.o
+ obj-$(CONFIG_USB_LH7A40X)	+= lh7a40x_udc.o
+ obj-$(CONFIG_USB_AT91)		+= at91_udc.o
++obj-$(CONFIG_USB_ATMEL_USBA)	+= atmel_usba_udc.o
+ obj-$(CONFIG_USB_FSL_USB2)	+= fsl_usb2_udc.o
+ 
+ #
+Index: linux-2.6.22.1/drivers/usb/gadget/inode.c
+===================================================================
+--- linux-2.6.22.1/drivers/usb/gadget/inode.c	(revision 1)
++++ linux-2.6.22.1/drivers/usb/gadget/inode.c	(arbetskopia)
 @@ -37,7 +37,7 @@
  #include <linux/device.h>
  #include <linux/moduleparam.h>
@@ -11740,3081 +23707,869 @@ index 46d0e52..855f8cc 100644
  #include <linux/usb_gadget.h>
  
  
-diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
-index 403dac7..f3e2897 100644
---- a/drivers/video/Kconfig
-+++ b/drivers/video/Kconfig
-@@ -849,6 +849,16 @@ config FB_INTSRAM
- 	  Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
- 	  to let frame buffer in external SDRAM.
- 
-+config FB_ATMEL_STN
-+	bool "Use a STN display with AT91/AT32 LCD Controller"
-+	depends on FB_ATMEL && ARCH_AT91SAM9261
-+	default n
-+	help
-+	  Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
-+	  Controller. Say N if you want to connect a TFT.
-+
-+	  If unsure, say N.
-+
- config FB_NVIDIA
- 	tristate "nVidia Framebuffer Support"
- 	depends on FB && PCI
-diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
-index e1d5bd0..bb361ab 100644
---- a/drivers/video/atmel_lcdfb.c
-+++ b/drivers/video/atmel_lcdfb.c
-@@ -37,7 +37,9 @@
- #endif
- 
- #if defined(CONFIG_ARCH_AT91)
--#define	ATMEL_LCDFB_FBINFO_DEFAULT	FBINFO_DEFAULT
-+#define	ATMEL_LCDFB_FBINFO_DEFAULT	(FBINFO_DEFAULT \
-+					 | FBINFO_PARTIAL_PAN_OK \
-+					 | FBINFO_HWACCEL_YPAN)
- 
- static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
- 					struct fb_var_screeninfo *var)
-@@ -74,11 +76,34 @@ static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
- 	.type		= FB_TYPE_PACKED_PIXELS,
- 	.visual		= FB_VISUAL_TRUECOLOR,
- 	.xpanstep	= 0,
--	.ypanstep	= 0,
-+	.ypanstep	= 1,
- 	.ywrapstep	= 0,
- 	.accel		= FB_ACCEL_NONE,
- };
- 
-+static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
-+{
-+	unsigned long value;
-+
-+	if (!(cpu_is_at91sam9261() || cpu_is_at32ap7000()))
-+		return xres;
-+
-+	value = xres;
-+	if ((lcdcon2 & ATMEL_LCDC_DISTYPE) != ATMEL_LCDC_DISTYPE_TFT) {
-+		/* STN display */
-+		if ((lcdcon2 & ATMEL_LCDC_DISTYPE) == ATMEL_LCDC_DISTYPE_STNCOLOR) {
-+			value *= 3;
-+		}
-+		if ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_4
-+		   || ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_8
-+		      && (lcdcon2 & ATMEL_LCDC_SCANMOD) == ATMEL_LCDC_SCANMOD_DUAL ))
-+			value = DIV_ROUND_UP(value, 4);
-+		else
-+			value = DIV_ROUND_UP(value, 8);
-+	}
-+
-+	return value;
-+}
- 
- static void atmel_lcdfb_update_dma(struct fb_info *info,
- 			       struct fb_var_screeninfo *var)
-@@ -181,6 +206,7 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
- 	var->xoffset = var->yoffset = 0;
- 
- 	switch (var->bits_per_pixel) {
-+	case 1:
- 	case 2:
- 	case 4:
- 	case 8:
-@@ -195,8 +221,11 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
- 		var->blue.offset = 10;
- 		var->red.length = var->green.length = var->blue.length = 5;
- 		break;
--	case 24:
- 	case 32:
-+		var->transp.offset = 24;
-+		var->transp.length = 8;
-+		/* fall through */
-+	case 24:
- 		var->red.offset = 0;
- 		var->green.offset = 8;
- 		var->blue.offset = 16;
-@@ -228,8 +257,10 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
- static int atmel_lcdfb_set_par(struct fb_info *info)
- {
- 	struct atmel_lcdfb_info *sinfo = info->par;
-+	unsigned long hozval_linesz;
- 	unsigned long value;
- 	unsigned long clk_value_khz;
-+	unsigned long bits_per_line;
- 
- 	dev_dbg(info->device, "%s:\n", __func__);
- 	dev_dbg(info->device, "  * resolution: %ux%u (%ux%u virtual)\n",
-@@ -241,12 +272,15 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
- 
- 	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
- 
--	if (info->var.bits_per_pixel <= 8)
-+	if (info->var.bits_per_pixel == 1)
-+		info->fix.visual = FB_VISUAL_MONO01;
-+	else if (info->var.bits_per_pixel <= 8)
- 		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
- 	else
- 		info->fix.visual = FB_VISUAL_TRUECOLOR;
- 
--	info->fix.line_length = info->var.xres_virtual * (info->var.bits_per_pixel / 8);
-+	bits_per_line = info->var.xres_virtual * info->var.bits_per_pixel;
-+	info->fix.line_length = DIV_ROUND_UP(bits_per_line, 8);
- 
- 	/* Re-initialize the DMA engine... */
- 	dev_dbg(info->device, "  * update DMA engine\n");
-@@ -262,18 +296,21 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
- 	/* Set pixel clock */
- 	clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
- 
--	value = clk_value_khz / PICOS2KHZ(info->var.pixclock);
--
--	if (clk_value_khz % PICOS2KHZ(info->var.pixclock))
--		value++;
-+	value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock));
- 
- 	value = (value / 2) - 1;
-+	dev_dbg(info->device, "  * programming CLKVAL = 0x%08lx\n", value);
- 
- 	if (value <= 0) {
- 		dev_notice(info->device, "Bypassing pixel clock divider\n");
- 		lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
--	} else
-+	} else {
- 		lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET);
-+		info->var.pixclock = KHZ2PICOS(clk_value_khz / (2 * (value + 1)));
-+		dev_dbg(info->device, "  updated pixclk:     %lu KHz\n",
-+					PICOS2KHZ(info->var.pixclock));
-+	}
-+
- 
- 	/* Initialize control register 2 */
- 	value = sinfo->default_lcdcon2;
-@@ -311,9 +348,14 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
- 	dev_dbg(info->device, "  * LCDTIM2 = %08lx\n", value);
- 	lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
- 
-+	/* Horizontal value (aka line size) */
-+	hozval_linesz = compute_hozval(info->var.xres,
-+					lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2));
-+
- 	/* Display size */
--	value = (info->var.xres - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
-+	value = (hozval_linesz - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
- 	value |= info->var.yres - 1;
-+	dev_dbg(info->device, "  * LCDFRMCFG = %08lx\n", value);
- 	lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
- 
- 	/* FIFO Threshold: Use formula from data sheet */
-@@ -421,6 +463,15 @@ static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
- 			ret = 0;
- 		}
- 		break;
-+
-+	case FB_VISUAL_MONO01:
-+		if (regno < 2) {
-+			val = (regno == 0) ? 0x00 : 0x1F;
-+			lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
-+			ret = 0;
-+		}
-+		break;
-+
+Index: linux-2.6.22.1/drivers/usb/host/ohci-at91.c
+===================================================================
+--- linux-2.6.22.1/drivers/usb/host/ohci-at91.c	(revision 1)
++++ linux-2.6.22.1/drivers/usb/host/ohci-at91.c	(arbetskopia)
+@@ -299,7 +299,7 @@
+ 	 *
+ 	 * REVISIT: some boards will be able to turn VBUS off...
+ 	 */
+-	if (at91_suspend_entering_slow_clock()) {
++	if (clk_must_disable(fclk)) {
+ 		ohci_usb_reset (ohci);
+ 		at91_stop_clock();
  	}
+Index: linux-2.6.22.1/drivers/i2c/busses/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/i2c/busses/Kconfig	(revision 1)
++++ linux-2.6.22.1/drivers/i2c/busses/Kconfig	(arbetskopia)
+@@ -4,6 +4,26 @@
  
- 	return ret;
-diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
-index fbef663..b6f936a 100644
---- a/drivers/video/backlight/Kconfig
-+++ b/drivers/video/backlight/Kconfig
-@@ -8,26 +8,44 @@ menuconfig BACKLIGHT_LCD_SUPPORT
- 	  Enable this to be able to choose the drivers for controlling the
- 	  backlight and the LCD panel on some platforms, for example on PDAs.
+ menu "I2C Hardware Bus support"
  
--config BACKLIGHT_CLASS_DEVICE
--        tristate "Lowlevel Backlight controls"
-+#
-+# LCD
-+#
-+config LCD_CLASS_DEVICE
-+        tristate "Lowlevel LCD controls"
- 	depends on BACKLIGHT_LCD_SUPPORT
- 	default m
- 	help
--	  This framework adds support for low-level control of the LCD
--          backlight. This includes support for brightness and power.
-+	  This framework adds support for low-level control of LCD.
-+	  Some framebuffer devices connect to platform-specific LCD modules
-+	  in order to have a platform-specific way to control the flat panel
-+	  (contrast and applying power to the LCD (not to the backlight!)).
- 
- 	  To have support for your specific LCD panel you will have to
- 	  select the proper drivers which depend on this option.
- 
--config LCD_CLASS_DEVICE
--        tristate "Lowlevel LCD controls"
-+config LCD_LTV350QV
-+	tristate "Samsung LTV350QV LCD Panel"
-+	depends on LCD_CLASS_DEVICE && SPI_MASTER
-+	default n
++config I2C_ATMELTWI
++	tristate "Atmel TWI/I2C"
++	depends on I2C
 +	help
-+	  If you have a Samsung LTV350QV LCD panel, say y to include a
-+	  power control driver for it.  The panel starts up in power
-+	  off state, so you need this driver in order to see any
-+	  output.
++	  Atmel on-chip TWI controller. Say Y if you have an AT32 or
++	  AT91-based device and want to use its built-in TWI
++	  functionality. Atmel's TWI is compatible with Philips' I2C
++	  protocol. If in doubt, say NO
 +
-+	  The LTV350QV panel is present on all ATSTK1000 boards.
++config I2C_ATMELTWI_BAUDRATE
++	prompt "Atmel TWI baudrate"
++	depends on I2C_ATMELTWI
++	int
++	default 100000
++	help
++	  Set the TWI/I2C baudrate. This will alter the default value. A
++	  different baudrate can be set by using a module parameter as well. If
++	  no parameter is provided when loading, this is the value that will be
++	  used.
 +
-+#
-+# Backlight
-+#
-+config BACKLIGHT_CLASS_DEVICE
-+        tristate "Lowlevel Backlight controls"
- 	depends on BACKLIGHT_LCD_SUPPORT
- 	default m
- 	help
--	  This framework adds support for low-level control of LCD.
--	  Some framebuffer devices connect to platform-specific LCD modules
--	  in order to have a platform-specific way to control the flat panel
--	  (contrast and applying power to the LCD (not to the backlight!)).
-+	  This framework adds support for low-level control of the LCD
-+          backlight. This includes support for brightness and power.
+ config I2C_ALI1535
+ 	tristate "ALI 1535"
+ 	depends on PCI
+@@ -80,6 +100,14 @@
+ 	  This supports the use of the I2C interface on Atmel AT91
+ 	  processors.
  
- 	  To have support for your specific LCD panel you will have to
- 	  select the proper drivers which depend on this option.
-diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
-index c6e2266..965a78b 100644
---- a/drivers/video/backlight/Makefile
-+++ b/drivers/video/backlight/Makefile
-@@ -1,6 +1,8 @@
- # Backlight & LCD drivers
- 
- obj-$(CONFIG_LCD_CLASS_DEVICE)     += lcd.o
-+obj-$(CONFIG_LCD_LTV350QV)	+= ltv350qv.o
++config I2C_AT91_CLOCKRATE
++	prompt "Atmel AT91 I2C/TWI clock-rate"
++	depends on I2C_AT91
++	int
++	default 100000
++	help
++	  Set the AT91 I2C/TWI clock-rate.
 +
- obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
- obj-$(CONFIG_BACKLIGHT_CORGI)	+= corgi_bl.o
- obj-$(CONFIG_BACKLIGHT_HP680)	+= hp680_bl.o
-diff --git a/drivers/video/backlight/ltv350qv.c b/drivers/video/backlight/ltv350qv.c
-new file mode 100644
-index 0000000..342b97a
---- /dev/null
-+++ b/drivers/video/backlight/ltv350qv.c
-@@ -0,0 +1,340 @@
+ config I2C_AU1550
+ 	tristate "Au1550/Au1200 SMBus interface"
+ 	depends on SOC_AU1550 || SOC_AU1200
+@@ -598,6 +626,14 @@
+ 	  This driver can also be built as a module.  If so, the module
+ 	  will be called i2c-voodoo3.
+ 
++config I2C_PCA
++	tristate "PCA9564"
++	depends on I2C
++	select I2C_ALGOPCA
++	help
++	  This driver support the Philips PCA 9564 Parallel bus to I2C
++	  bus controller.
++
+ config I2C_PCA_ISA
+ 	tristate "PCA9564 on an ISA bus"
+ 	depends on ISA
+Index: linux-2.6.22.1/drivers/i2c/busses/i2c-atmeltwi.c
+===================================================================
+--- linux-2.6.22.1/drivers/i2c/busses/i2c-atmeltwi.c	(revision 0)
++++ linux-2.6.22.1/drivers/i2c/busses/i2c-atmeltwi.c	(revision 0)
+@@ -0,0 +1,383 @@
 +/*
-+ * Power control for Samsung LTV350QV Quarter VGA LCD Panel
++ * i2c Support for Atmel's Two-Wire Interface (TWI)
 + *
-+ * Copyright (C) 2006, 2007 Atmel Corporation
++ * Based on the work of Copyright (C) 2004 Rick Bronson
++ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
++ * Ported to AVR32 and heavily modified by Espen Krangnes
++ * <ekrangnes at atmel.com>
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * Borrowed heavily from the original work by:
++ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
++ *
++ * Partialy rewriten by Karel Hojdar <cmkaho at seznam.cz>
++ * bugs removed, interrupt routine markedly rewritten
 + *
 + * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
 + */
-+#include <linux/delay.h>
++
++
 +#include <linux/err.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/lcd.h>
 +#include <linux/module.h>
-+#include <linux/spi/spi.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/types.h>
++#include <linux/delay.h>
++#include <linux/i2c.h>
++#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/platform_device.h>
++#include <linux/completion.h>
++#include <asm/io.h>
++#include <linux/time.h>
++#include "atmeltwi.h"
 +
-+#include "ltv350qv.h"
++static unsigned int baudrate = CONFIG_I2C_ATMELTWI_BAUDRATE;
++module_param(baudrate, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP);
++MODULE_PARM_DESC(baudrate, "The TWI baudrate");
 +
-+#define POWER_IS_ON(pwr)	((pwr) <= FB_BLANK_NORMAL)
 +
-+struct ltv350qv {
-+	struct spi_device	*spi;
-+	u8			*buffer;
-+	int			power;
-+	struct lcd_device	*ld;
++struct atmel_twi {
++	void __iomem *regs;
++	struct i2c_adapter adapter;
++	struct clk *pclk;
++	spinlock_t lock;
++	struct completion comp;
++	u32 intmask;
++	u8 *buf;
++	u8 len;
++	u8 acks_left;
++	u8 nack;
++	unsigned int irq;
++
++};
++#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
++
++/*
++ * Initialize the TWI hardware registers.
++ */
++static int __devinit twi_hwinit(struct atmel_twi *twi)
++{
++	unsigned long cdiv, ckdiv=0;
++
++	twi_writel(twi, IDR, ~0UL);
++	twi_writel(twi, CR, TWI_BIT(SWRST));	/*Reset peripheral*/
++	twi_readl(twi, SR);
++
++	cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
++
++	while (cdiv > 255) {
++		ckdiv++;
++		cdiv = cdiv >> 1;
++	}
++
++	if (ckdiv > 7)
++		return -EINVAL;
++	else
++		twi_writel(twi, CWGR, (TWI_BF(CKDIV, ckdiv)
++			       | TWI_BF(CHDIV, cdiv)
++			       | TWI_BF(CLDIV, cdiv)));
++	return 0;
++}
++
++/*
++ * Waits for the i2c status register to set the specified bitmask
++ * Returns 0 if timed out (~100ms).
++ */
++static short twi_complete(struct atmel_twi *twi, u32 mask)
++{
++	int timeout = msecs_to_jiffies(100);
++
++	twi->intmask = mask;
++	init_completion(&twi->comp);
++
++	twi_writel(twi, IER, mask);
++
++	if (!wait_for_completion_timeout(&twi->comp, timeout)) {
++		/* RESET TWI interface */
++		twi_writel(twi, CR, TWI_BIT(SWRST));
++
++		/* Reinitialize TWI */
++		twi_hwinit(twi);
++
++		return -ETIMEDOUT;
++	}
++	return 0;
++}
++
++/*
++ * Generic i2c master transfer entrypoint.
++ */
++static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
++{
++	struct atmel_twi *twi = to_atmel_twi(adap);
++	struct i2c_msg *pmsg;
++	int i;
++
++	/* get first message */
++	pmsg = msgs;
++
++	dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
++
++	twi->nack = 0;
++	for (i = 0; i < num; i++, pmsg++) {
++		twi->len = pmsg->len;
++		twi->buf = pmsg->buf;
++		twi->acks_left = pmsg->len;
++		twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
++			(pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
++		twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
++
++		dev_dbg(&adap->dev,"#%d: internal addr %d %s byte%s %s 0x%02x\n",
++			i,pmsg->len, pmsg->flags & I2C_M_RD ? "reading" : "writing",
++			pmsg->len > 1 ? "s" : "",
++			pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
++
++		/* enable */
++		twi_writel(twi, CR, TWI_BIT(MSEN));
++
++		if (pmsg->flags & I2C_M_RD) {
++			if (twi->len == 1)
++				twi_writel(twi, CR,
++					TWI_BIT(START) | TWI_BIT(STOP));
++			else
++				twi_writel(twi, CR, TWI_BIT(START));
++
++			if (twi_complete(twi, TWI_BIT(RXRDY)) == -ETIMEDOUT) {
++				dev_dbg(&adap->dev, "RXRDY timeout. Stopped with %d bytes left\n",
++					twi->acks_left);
++				return -ETIMEDOUT;
++			}
++		} else {
++			twi_writel(twi, THR, twi->buf[0]);
++			if (twi_complete(twi, TWI_BIT(TXRDY)) == -ETIMEDOUT) {
++				dev_dbg(&adap->dev, "TXRDY timeout. Stopped with %d bytes left\n",
++				twi->acks_left);
++				return -ETIMEDOUT;
++			}
++
++			if (twi->nack)
++			    return -ENODEV;
++		}
++
++		/* Disable TWI interface */
++		twi_writel(twi, CR, TWI_BIT(MSDIS));
++
++	} /* end cur msg */
++
++	return i;
++}
++
++
++static irqreturn_t twi_interrupt(int irq, void *dev_id)
++{
++	struct atmel_twi *twi = dev_id;
++	int status = twi_readl(twi, SR);
++
++	/* Save state for later debug prints */
++	int old_mask = twi->intmask;
++	int old_status = status;
++
++	if (twi->intmask & status) {
++		if (status & TWI_BIT(NACK))
++			goto nack;
++
++		status &= twi->intmask;
++
++		if (status & TWI_BIT(TXCOMP))
++		    goto complete;
++
++		else if (status & TWI_BIT(RXRDY)) {
++			if ( twi->acks_left > 0 ) {
++			    twi->buf[twi->len - twi->acks_left] =
++				twi_readl(twi, RHR);
++			    twi->acks_left--;
++			}
++			if ( twi->acks_left == 1 )
++				twi_writel(twi, CR, TWI_BIT(STOP));
++
++			if (twi->acks_left == 0 ) {
++				twi->intmask = TWI_BIT(TXCOMP);
++				twi_writel(twi, IER, TWI_BIT(TXCOMP));
++			}
++		} else if (status & TWI_BIT(TXRDY)) {
++			twi->acks_left--;
++			if ( twi->acks_left == 0 ) {
++				twi->intmask = TWI_BIT(TXCOMP);
++				twi_writel(twi, IER, TWI_BIT(TXCOMP));
++			} else if (twi->acks_left > 0)
++				twi_writel(twi, THR, twi->buf[twi->len - twi->acks_left]);
++		}
++	}
++
++	dev_dbg(&twi->adapter.dev,
++		"TWI ISR, SR 0x%08X, intmask 0x%08X, acks_left %i.\n",
++		old_status, old_mask, twi->acks_left);
++
++	return IRQ_HANDLED;
++
++nack:
++	dev_dbg(&twi->adapter.dev, "NACK received!\n");
++	twi->nack = 1;
++
++complete:
++	twi_writel(twi, IDR, ~0UL);
++	complete(&twi->comp);
++
++	dev_dbg(&twi->adapter.dev,
++		"TWI ISR, SR 0x%08X, intmask 0x%08X, \
++		acks_left %i - completed.\n",
++		old_status, old_mask, twi->acks_left);
++
++	return IRQ_HANDLED;
++}
++
++
++/*
++ * Return list of supported functionality.
++ */
++static u32 twi_func(struct i2c_adapter *adapter)
++{
++	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
++}
++
++/* For now, we only handle combined mode (smbus) */
++static struct i2c_algorithm twi_algorithm = {
++	.master_xfer	= twi_xfer,
++	.functionality	= twi_func,
 +};
 +
 +/*
-+ * The power-on and power-off sequences are taken from the
-+ * LTV350QV-F04 data sheet from Samsung. The register definitions are
-+ * taken from the S6F2002 command list also from Samsung. Both
-+ * documents are distributed with the AVR32 Linux BSP CD from Atmel.
-+ *
-+ * There's still some voodoo going on here, but it's a lot better than
-+ * in the first incarnation of the driver where all we had was the raw
-+ * numbers from the initialization sequence.
++ * Main initialization routine.
 + */
-+static int ltv350qv_write_reg(struct ltv350qv *lcd, u8 reg, u16 val)
++static int __devinit twi_probe(struct platform_device *pdev)
 +{
-+	struct spi_message msg;
-+	struct spi_transfer index_xfer = {
-+		.len		= 3,
-+		.cs_change	= 1,
-+	};
-+	struct spi_transfer value_xfer = {
-+		.len		= 3,
-+		.cs_change	= 1,
-+	};
++	struct atmel_twi *twi;
++	struct resource *regs;
++	struct clk *pclk;
++	struct i2c_adapter *adapter;
++	int rc, irq;
 +
-+	spi_message_init(&msg);
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs)
++		return -ENXIO;
 +
-+	/* register index */
-+	lcd->buffer[0] = LTV_OPC_INDEX;
-+	lcd->buffer[1] = 0x00;
-+	lcd->buffer[2] = reg & 0x7f;
-+	index_xfer.tx_buf = lcd->buffer;
-+	spi_message_add_tail(&index_xfer, &msg);
++	pclk = clk_get(&pdev->dev, "pclk");
++	if (IS_ERR(pclk))
++		return PTR_ERR(pclk);
++	clk_enable(pclk);
 +
-+	/* register value */
-+	lcd->buffer[4] = LTV_OPC_DATA;
-+	lcd->buffer[5] = val >> 8;
-+	lcd->buffer[6] = val;
-+	value_xfer.tx_buf = lcd->buffer + 4;
-+	spi_message_add_tail(&value_xfer, &msg);
++	rc = -ENOMEM;
++	twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
++	if (!twi) {
++		dev_err(&pdev->dev, "can't allocate interface!\n");
++		goto err_alloc_twi;
++	}
 +
-+	return spi_sync(lcd->spi, &msg);
-+}
++	twi->pclk = pclk;
++	twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!twi->regs)
++		goto err_ioremap;
 +
-+/* The comments are taken straight from the data sheet */
-+static int ltv350qv_power_on(struct ltv350qv *lcd)
-+{
-+	int ret;
++	irq = platform_get_irq(pdev,0);
++	rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
++	if (rc) {
++		dev_err(&pdev->dev, "can't bind irq!\n");
++		goto err_irq;
++	}
++	twi->irq = irq;
 +
-+	/* Power On Reset Display off State */
-+	if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, 0x0000))
-+		goto err;
-+	msleep(15);
++	rc = twi_hwinit(twi);
++	if (rc) {
++		dev_err(&pdev->dev, "Unable to set baudrate\n");
++		goto err_hw_init;
++	}
 +
-+	/* Power Setting Function 1 */
-+	if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE))
-+		goto err;
-+	if (ltv350qv_write_reg(lcd, LTV_PWRCTL2, LTV_VCOML_ENABLE))
-+		goto err_power1;
++	adapter = &twi->adapter;
++	sprintf(adapter->name, "TWI");
++	adapter->algo = &twi_algorithm;
++	adapter->class = I2C_CLASS_HWMON;
++	adapter->dev.parent = &pdev->dev;
 +
-+	/* Power Setting Function 2 */
-+	if (ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+			       LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
-+			       | LTV_SUPPLY_CURRENT(5)))
-+		goto err_power2;
++	platform_set_drvdata(pdev, twi);
 +
-+	msleep(55);
++	rc = i2c_add_adapter(adapter);
++	if (rc) {
++		dev_err(&pdev->dev, "Adapter %s registration failed\n",
++			adapter->name);
++		goto err_register;
++	}
 +
-+	/* Instruction Setting */
-+	ret = ltv350qv_write_reg(lcd, LTV_IFCTL,
-+				 LTV_NMD | LTV_REV | LTV_NL(0x1d));
-+	ret |= ltv350qv_write_reg(lcd, LTV_DATACTL,
-+				  LTV_DS_SAME | LTV_CHS_480
-+				  | LTV_DF_RGB | LTV_RGB_BGR);
-+	ret |= ltv350qv_write_reg(lcd, LTV_ENTRY_MODE,
-+				  LTV_VSPL_ACTIVE_LOW
-+				  | LTV_HSPL_ACTIVE_LOW
-+				  | LTV_DPL_SAMPLE_RISING
-+				  | LTV_EPL_ACTIVE_LOW
-+				  | LTV_SS_RIGHT_TO_LEFT);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL1, LTV_CLW(3));
-+	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+				  LTV_NW_INV_1LINE | LTV_FWI(3));
-+	ret |= ltv350qv_write_reg(lcd, LTV_VBP, 0x000a);
-+	ret |= ltv350qv_write_reg(lcd, LTV_HBP, 0x0021);
-+	ret |= ltv350qv_write_reg(lcd, LTV_SOTCTL, LTV_SDT(3) | LTV_EQ(0));
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(0), 0x0103);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(1), 0x0301);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(2), 0x1f0f);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(3), 0x1f0f);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(4), 0x0707);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(5), 0x0307);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(6), 0x0707);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(7), 0x0000);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(8), 0x0004);
-+	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(9), 0x0000);
-+	if (ret)
-+		goto err_settings;
++	dev_info(&pdev->dev, "Atmel TWI i2c bus device (baudrate %dk) at 0x%08lx.\n",
++		 baudrate/1000, (unsigned long)regs->start);
 +
-+	/* Wait more than 2 frames */
-+	msleep(20);
-+
-+	/* Display On Sequence */
-+	ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+				 LTV_VCOM_DISABLE | LTV_VCOMOUT_ENABLE
-+				 | LTV_POWER_ON | LTV_DRIVE_CURRENT(5)
-+				 | LTV_SUPPLY_CURRENT(5));
-+	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+				  LTV_NW_INV_1LINE | LTV_DSC | LTV_FWI(3));
-+	if (ret)
-+		goto err_disp_on;
-+
-+	/* Display should now be ON. Phew. */
 +	return 0;
 +
-+err_disp_on:
-+	/*
-+	 * Try to recover. Error handling probably isn't very useful
-+	 * at this point, just make a best effort to switch the panel
-+	 * off.
-+	 */
-+	ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+			   LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
-+			   | LTV_SUPPLY_CURRENT(5));
-+	ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+			   LTV_NW_INV_1LINE | LTV_FWI(3));
-+err_settings:
-+err_power2:
-+err_power1:
-+	ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
-+	msleep(1);
-+err:
-+	ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
-+	return -EIO;
++
++err_register:
++	platform_set_drvdata(pdev, NULL);
++
++err_hw_init:
++	free_irq(irq, twi);
++
++err_irq:
++	iounmap(twi->regs);
++
++err_ioremap:
++	kfree(twi);
++
++err_alloc_twi:
++	clk_disable(pclk);
++	clk_put(pclk);
++
++	return rc;
 +}
 +
-+static int ltv350qv_power_off(struct ltv350qv *lcd)
++static int __devexit twi_remove(struct platform_device *pdev)
 +{
-+	int ret;
++	struct atmel_twi *twi = platform_get_drvdata(pdev);
++	int res;
 +
-+	/* Display Off Sequence */
-+	ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+				 LTV_VCOM_DISABLE
-+				 | LTV_DRIVE_CURRENT(5)
-+				 | LTV_SUPPLY_CURRENT(5));
-+	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+				  LTV_NW_INV_1LINE | LTV_FWI(3));
++	platform_set_drvdata(pdev, NULL);
++	res = i2c_del_adapter(&twi->adapter);
++	twi_writel(twi, CR, TWI_BIT(MSDIS));
++	iounmap(twi->regs);
++	clk_disable(twi->pclk);
++	clk_put(twi->pclk);
++	free_irq(twi->irq, twi);
++	kfree(twi);
 +
-+	/* Power down setting 1 */
-+	ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
-+
-+	/* Wait at least 1 ms */
-+	msleep(1);
-+
-+	/* Power down setting 2 */
-+	ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
-+
-+	/*
-+	 * No point in trying to recover here. If we can't switch the
-+	 * panel off, what are we supposed to do other than inform the
-+	 * user about the failure?
-+	 */
-+	if (ret)
-+		return -EIO;
-+
-+	/* Display power should now be OFF */
-+	return 0;
++	return res;
 +}
 +
-+static int ltv350qv_power(struct ltv350qv *lcd, int power)
++static struct platform_driver twi_driver = {
++	.probe		= twi_probe,
++	.remove		= __devexit_p(twi_remove),
++	.driver		= {
++		.name	= "atmel_twi",
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init atmel_twi_init(void)
++{
++	return platform_driver_register(&twi_driver);
++}
++
++static void __exit atmel_twi_exit(void)
++{
++	platform_driver_unregister(&twi_driver);
++}
++
++module_init(atmel_twi_init);
++module_exit(atmel_twi_exit);
++
++MODULE_AUTHOR("Espen Krangnes");
++MODULE_DESCRIPTION("I2C driver for Atmel TWI");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.22.1/drivers/i2c/busses/atmeltwi.h
+===================================================================
+--- linux-2.6.22.1/drivers/i2c/busses/atmeltwi.h	(revision 0)
++++ linux-2.6.22.1/drivers/i2c/busses/atmeltwi.h	(revision 0)
+@@ -0,0 +1,117 @@
++/*
++ * Register definitions for the Atmel Two-Wire Interface
++ */
++
++#ifndef __ASM_AVR32_TWI_H__
++#define __ASM_AVR32_TWI_H__
++
++/* TWI register offsets */
++#define TWI_CR					0x0000
++#define TWI_MMR					0x0004
++#define TWI_SMR					0x0008
++#define TWI_IADR				0x000c
++#define TWI_CWGR				0x0010
++#define TWI_SR					0x0020
++#define TWI_IER					0x0024
++#define TWI_IDR					0x0028
++#define TWI_IMR					0x002c
++#define TWI_RHR					0x0030
++#define TWI_THR					0x0034
++
++/* Bitfields in CR */
++#define TWI_START_OFFSET			0
++#define TWI_START_SIZE				1
++#define TWI_STOP_OFFSET				1
++#define TWI_STOP_SIZE				1
++#define TWI_MSEN_OFFSET				2
++#define TWI_MSEN_SIZE				1
++#define TWI_MSDIS_OFFSET			3
++#define TWI_MSDIS_SIZE				1
++#define TWI_SVEN_OFFSET				4
++#define TWI_SVEN_SIZE				1
++#define TWI_SVDIS_OFFSET			5
++#define TWI_SVDIS_SIZE				1
++#define TWI_SWRST_OFFSET			7
++#define TWI_SWRST_SIZE				1
++
++/* Bitfields in MMR */
++#define TWI_IADRSZ_OFFSET			8
++#define TWI_IADRSZ_SIZE				2
++#define TWI_MREAD_OFFSET			12
++#define TWI_MREAD_SIZE				1
++#define TWI_DADR_OFFSET				16
++#define TWI_DADR_SIZE				7
++
++/* Bitfields in SMR */
++#define TWI_SADR_OFFSET				16
++#define TWI_SADR_SIZE				7
++
++/* Bitfields in IADR */
++#define TWI_IADR_OFFSET				0
++#define TWI_IADR_SIZE				24
++
++/* Bitfields in CWGR */
++#define TWI_CLDIV_OFFSET			0
++#define TWI_CLDIV_SIZE				8
++#define TWI_CHDIV_OFFSET			8
++#define TWI_CHDIV_SIZE				8
++#define TWI_CKDIV_OFFSET			16
++#define TWI_CKDIV_SIZE				3
++
++/* Bitfields in SR */
++#define TWI_TXCOMP_OFFSET			0
++#define TWI_TXCOMP_SIZE				1
++#define TWI_RXRDY_OFFSET			1
++#define TWI_RXRDY_SIZE				1
++#define TWI_TXRDY_OFFSET			2
++#define TWI_TXRDY_SIZE				1
++#define TWI_SVDIR_OFFSET			3
++#define TWI_SVDIR_SIZE				1
++#define TWI_SVACC_OFFSET			4
++#define TWI_SVACC_SIZE				1
++#define TWI_GCACC_OFFSET			5
++#define TWI_GCACC_SIZE				1
++#define TWI_OVRE_OFFSET				6
++#define TWI_OVRE_SIZE				1
++#define TWI_UNRE_OFFSET				7
++#define TWI_UNRE_SIZE				1
++#define TWI_NACK_OFFSET				8
++#define TWI_NACK_SIZE				1
++#define TWI_ARBLST_OFFSET			9
++#define TWI_ARBLST_SIZE				1
++
++/* Bitfields in RHR */
++#define TWI_RXDATA_OFFSET			0
++#define TWI_RXDATA_SIZE				8
++
++/* Bitfields in THR */
++#define TWI_TXDATA_OFFSET			0
++#define TWI_TXDATA_SIZE				8
++
++/* Constants for IADRSZ */
++#define TWI_IADRSZ_NO_ADDR			0
++#define TWI_IADRSZ_ONE_BYTE			1
++#define TWI_IADRSZ_TWO_BYTES			2
++#define TWI_IADRSZ_THREE_BYTES			3
++
++/* Bit manipulation macros */
++#define TWI_BIT(name)					\
++	(1 << TWI_##name##_OFFSET)
++#define TWI_BF(name,value)				\
++	(((value) & ((1 << TWI_##name##_SIZE) - 1))	\
++	 << TWI_##name##_OFFSET)
++#define TWI_BFEXT(name,value)				\
++	(((value) >> TWI_##name##_OFFSET)		\
++	 & ((1 << TWI_##name##_SIZE) - 1))
++#define TWI_BFINS(name,value,old)			\
++	(((old) & ~(((1 << TWI_##name##_SIZE) - 1)	\
++		    << TWI_##name##_OFFSET))		\
++	 | TWI_BF(name,value))
++
++/* Register access macros */
++#define twi_readl(port,reg)				\
++	__raw_readl((port)->regs + TWI_##reg)
++#define twi_writel(port,reg,value)			\
++	__raw_writel((value), (port)->regs + TWI_##reg)
++
++#endif /* __ASM_AVR32_TWI_H__ */
+Index: linux-2.6.22.1/drivers/i2c/busses/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/i2c/busses/Makefile	(revision 1)
++++ linux-2.6.22.1/drivers/i2c/busses/Makefile	(arbetskopia)
+@@ -30,6 +30,7 @@
+ obj-$(CONFIG_I2C_PARPORT)	+= i2c-parport.o
+ obj-$(CONFIG_I2C_PARPORT_LIGHT)	+= i2c-parport-light.o
+ obj-$(CONFIG_I2C_PASEMI)	+= i2c-pasemi.o
++obj-$(CONFIG_I2C_PCA)		+= i2c-pca.o
+ obj-$(CONFIG_I2C_PCA_ISA)	+= i2c-pca-isa.o
+ obj-$(CONFIG_I2C_PIIX4)		+= i2c-piix4.o
+ obj-$(CONFIG_I2C_PNX)		+= i2c-pnx.o
+@@ -52,6 +53,7 @@
+ obj-$(CONFIG_I2C_VOODOO3)	+= i2c-voodoo3.o
+ obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
+ obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
++obj-$(CONFIG_I2C_ATMELTWI)	+= i2c-atmeltwi.o
+ 
+ ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
+ EXTRA_CFLAGS += -DDEBUG
+Index: linux-2.6.22.1/drivers/i2c/busses/i2c-pca.c
+===================================================================
+--- linux-2.6.22.1/drivers/i2c/busses/i2c-pca.c	(revision 0)
++++ linux-2.6.22.1/drivers/i2c/busses/i2c-pca.c	(revision 0)
+@@ -0,0 +1,213 @@
++/*
++ *  Platform driver for PCA9564 I2C bus controller.
++ *
++ *  (C) 2006 Andrew Victor
++ *
++ *  Based on i2c-pca-isa.c driver for PCA9564 on ISA boards
++ *    Copyright (C) 2004 Arcom Control Systems
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License as published by
++ *  the Free Software Foundation; either version 2 of the License, or
++ *  (at your option) any later version.
++ *
++ *  This program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *  GNU General Public License for more details.
++ *
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the Free Software
++ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/delay.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/wait.h>
++#include <linux/platform_device.h>
++
++#include <linux/i2c.h>
++#include <linux/i2c-algo-pca.h>
++
++#include <asm/io.h>
++
++#include "../algos/i2c-algo-pca.h"
++
++#define PCA_OWN_ADDRESS		0x55	/* our address for slave mode */
++#define PCA_CLOCK		I2C_PCA_CON_59kHz
++
++//#define REG_SHIFT		2
++#define REG_SHIFT		0
++
++//#define DEBUG_IO
++
++#define PCA_IO_SIZE 4
++
++static void __iomem *base_addr;
++static int irq;
++static wait_queue_head_t pca_wait;
++
++static int pca_getown(struct i2c_algo_pca_data *adap)
++{
++	return PCA_OWN_ADDRESS;
++}
++
++static int pca_getclock(struct i2c_algo_pca_data *adap)
++{
++	return PCA_CLOCK;
++}
++
++static void pca_writebyte(struct i2c_algo_pca_data *adap, int reg, int val)
++{
++#ifdef DEBUG_IO
++	static char *names[] = { "T/O", "DAT", "ADR", "CON" };
++	printk("*** write %s at %#lx <= %#04x\n", names[reg], (unsigned long) base_addr+reg, val);
++#endif
++	udelay(1);
++	outb(val, base_addr + (reg << REG_SHIFT));
++}
++
++static int pca_readbyte(struct i2c_algo_pca_data *adap, int reg)
++{
++	int res;
++
++	udelay(1);
++	res = inb(base_addr + (reg << REG_SHIFT));
++#ifdef DEBUG_IO
++	{
++		static char *names[] = { "STA", "DAT", "ADR", "CON" };
++		printk("*** read  %s => %#04x\n", names[reg], res);
++	}
++#endif
++	return res;
++}
++
++static int pca_waitforinterrupt(struct i2c_algo_pca_data *adap)
 +{
 +	int ret = 0;
 +
-+	if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
-+		ret = ltv350qv_power_on(lcd);
-+	else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
-+		ret = ltv350qv_power_off(lcd);
-+
-+	if (!ret)
-+		lcd->power = power;
-+
++	if (irq > -1) {
++		ret = wait_event_interruptible(pca_wait,
++				pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI);
++	} else {
++		while ((pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0)
++			udelay(100);
++	}
 +	return ret;
 +}
 +
-+static int ltv350qv_set_power(struct lcd_device *ld, int power)
++static irqreturn_t pca_handler(int this_irq, void *dev_id)
 +{
-+	struct ltv350qv *lcd;
-+
-+	lcd = class_get_devdata(&ld->class_dev);
-+	return ltv350qv_power(lcd, power);
++	wake_up_interruptible(&pca_wait);
++	return IRQ_HANDLED;
 +}
 +
-+static int ltv350qv_get_power(struct lcd_device *ld)
-+{
-+	struct ltv350qv *lcd;
-+
-+	lcd = class_get_devdata(&ld->class_dev);
-+	return lcd->power;
-+}
-+
-+static struct lcd_ops ltv_ops = {
-+	.get_power	= ltv350qv_get_power,
-+	.set_power	= ltv350qv_set_power,
++static struct i2c_algo_pca_data pca_i2c_data = {
++	.get_own		= pca_getown,
++	.get_clock		= pca_getclock,
++	.write_byte		= pca_writebyte,
++	.read_byte		= pca_readbyte,
++	.wait_for_interrupt	= pca_waitforinterrupt,
 +};
 +
-+static int __devinit ltv350qv_probe(struct spi_device *spi)
-+{
-+	struct ltv350qv *lcd;
-+	struct lcd_device *ld;
-+	int ret;
-+
-+	lcd = kzalloc(sizeof(struct ltv350qv), GFP_KERNEL);
-+	if (!lcd)
-+		return -ENOMEM;
-+
-+	lcd->spi = spi;
-+	lcd->power = FB_BLANK_POWERDOWN;
-+	lcd->buffer = kzalloc(8, GFP_KERNEL);
-+
-+	ld = lcd_device_register("ltv350qv", lcd, &ltv_ops);
-+	if (IS_ERR(ld)) {
-+		ret = PTR_ERR(ld);
-+		goto out_free_lcd;
-+	}
-+	lcd->ld = ld;
-+
-+	ret = ltv350qv_power(lcd, FB_BLANK_UNBLANK);
-+	if (ret)
-+		goto out_unregister;
-+
-+	dev_set_drvdata(&spi->dev, lcd);
-+
-+	return 0;
-+
-+out_unregister:
-+	lcd_device_unregister(ld);
-+out_free_lcd:
-+	kfree(lcd);
-+	return ret;
-+}
-+
-+static int __devexit ltv350qv_remove(struct spi_device *spi)
-+{
-+	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
-+
-+	ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
-+	lcd_device_unregister(lcd->ld);
-+	kfree(lcd);
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int ltv350qv_suspend(struct spi_device *spi,
-+			    pm_message_t state, u32 level)
-+{
-+	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
-+
-+	if (level == SUSPEND_POWER_DOWN)
-+		return ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
-+
-+	return 0;
-+}
-+
-+static int ltv350qv_resume(struct spi_device *spi, u32 level)
-+{
-+	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
-+
-+	if (level == RESUME_POWER_ON)
-+		return ltv350qv_power(lcd, FB_BLANK_UNBLANK);
-+
-+	return 0;
-+}
-+#else
-+#define ltv350qv_suspend	NULL
-+#define ltv350qv_resume		NULL
-+#endif
-+
-+/* Power down all displays on reboot, poweroff or halt */
-+static void ltv350qv_shutdown(struct spi_device *spi)
-+{
-+	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
-+
-+	ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
-+}
-+
-+static struct spi_driver ltv350qv_driver = {
-+	.driver = {
-+		.name		= "ltv350qv",
-+		.bus		= &spi_bus_type,
-+		.owner		= THIS_MODULE,
-+	},
-+
-+	.probe		= ltv350qv_probe,
-+	.remove		= __devexit_p(ltv350qv_remove),
-+	.shutdown	= ltv350qv_shutdown,
-+	.suspend	= ltv350qv_suspend,
-+	.resume		= ltv350qv_resume,
++static struct i2c_adapter pca_i2c_ops = {
++	.owner          = THIS_MODULE,
++	.id		= I2C_HW_A_PLAT,
++	.algo_data	= &pca_i2c_data,
++	.name		= "PCA9564",
++	.class		= I2C_CLASS_HWMON,
 +};
 +
-+static int __init ltv350qv_init(void)
++static int __devinit pca_i2c_probe(struct platform_device *pdev)
 +{
-+	return spi_register_driver(&ltv350qv_driver);
-+}
++	struct resource *res;
 +
-+static void __exit ltv350qv_exit(void)
-+{
-+	spi_unregister_driver(&ltv350qv_driver);
-+}
-+module_init(ltv350qv_init);
-+module_exit(ltv350qv_exit);
++	init_waitqueue_head(&pca_wait);
 +
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/video/backlight/ltv350qv.h b/drivers/video/backlight/ltv350qv.h
-new file mode 100644
-index 0000000..189112e
---- /dev/null
-+++ b/drivers/video/backlight/ltv350qv.h
-@@ -0,0 +1,95 @@
-+/*
-+ * Register definitions for Samsung LTV350QV Quarter VGA LCD Panel
-+ *
-+ * Copyright (C) 2006, 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __LTV350QV_H
-+#define __LTV350QV_H
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res)
++		return -ENODEV;
 +
-+#define LTV_OPC_INDEX	0x74
-+#define LTV_OPC_DATA	0x76
-+
-+#define LTV_ID		0x00		/* ID Read */
-+#define LTV_IFCTL	0x01		/* Display Interface Control */
-+#define LTV_DATACTL	0x02		/* Display Data Control */
-+#define LTV_ENTRY_MODE	0x03		/* Entry Mode */
-+#define LTV_GATECTL1	0x04		/* Gate Control 1 */
-+#define LTV_GATECTL2	0x05		/* Gate Control 2 */
-+#define LTV_VBP		0x06		/* Vertical Back Porch */
-+#define LTV_HBP		0x07		/* Horizontal Back Porch */
-+#define LTV_SOTCTL	0x08		/* Source Output Timing Control */
-+#define LTV_PWRCTL1	0x09		/* Power Control 1 */
-+#define LTV_PWRCTL2	0x0a		/* Power Control 2 */
-+#define LTV_GAMMA(x)	(0x10 + (x))	/* Gamma control */
-+
-+/* Bit definitions for LTV_IFCTL */
-+#define LTV_IM			(1 << 15)
-+#define LTV_NMD			(1 << 14)
-+#define LTV_SSMD		(1 << 13)
-+#define LTV_REV			(1 <<  7)
-+#define LTV_NL(x)		(((x) & 0x001f) << 0)
-+
-+/* Bit definitions for LTV_DATACTL */
-+#define LTV_DS_SAME		(0 << 12)
-+#define LTV_DS_D_TO_S		(1 << 12)
-+#define LTV_DS_S_TO_D		(2 << 12)
-+#define LTV_CHS_384		(0 <<  9)
-+#define LTV_CHS_480		(1 <<  9)
-+#define LTV_CHS_492		(2 <<  9)
-+#define LTV_DF_RGB		(0 <<  6)
-+#define LTV_DF_RGBX		(1 <<  6)
-+#define LTV_DF_XRGB		(2 <<  6)
-+#define LTV_RGB_RGB		(0 <<  2)
-+#define LTV_RGB_BGR		(1 <<  2)
-+#define LTV_RGB_GRB		(2 <<  2)
-+#define LTV_RGB_RBG		(3 <<  2)
-+
-+/* Bit definitions for LTV_ENTRY_MODE */
-+#define LTV_VSPL_ACTIVE_LOW	(0 << 15)
-+#define LTV_VSPL_ACTIVE_HIGH	(1 << 15)
-+#define LTV_HSPL_ACTIVE_LOW	(0 << 14)
-+#define LTV_HSPL_ACTIVE_HIGH	(1 << 14)
-+#define LTV_DPL_SAMPLE_RISING	(0 << 13)
-+#define LTV_DPL_SAMPLE_FALLING	(1 << 13)
-+#define LTV_EPL_ACTIVE_LOW	(0 << 12)
-+#define LTV_EPL_ACTIVE_HIGH	(1 << 12)
-+#define LTV_SS_LEFT_TO_RIGHT	(0 <<  8)
-+#define LTV_SS_RIGHT_TO_LEFT	(1 <<  8)
-+#define LTV_STB			(1 <<  1)
-+
-+/* Bit definitions for LTV_GATECTL1 */
-+#define LTV_CLW(x)		(((x) & 0x0007) << 12)
-+#define LTV_GAON		(1 <<  5)
-+#define LTV_SDR			(1 <<  3)
-+
-+/* Bit definitions for LTV_GATECTL2 */
-+#define LTV_NW_INV_FRAME	(0 << 14)
-+#define LTV_NW_INV_1LINE	(1 << 14)
-+#define LTV_NW_INV_2LINE	(2 << 14)
-+#define LTV_DSC			(1 << 12)
-+#define LTV_GIF			(1 <<  8)
-+#define LTV_FHN			(1 <<  7)
-+#define LTV_FTI(x)		(((x) & 0x0003) << 4)
-+#define LTV_FWI(x)		(((x) & 0x0003) << 0)
-+
-+/* Bit definitions for LTV_SOTCTL */
-+#define LTV_SDT(x)		(((x) & 0x0007) << 10)
-+#define LTV_EQ(x)		(((x) & 0x0007) <<  2)
-+
-+/* Bit definitions for LTV_PWRCTL1 */
-+#define LTV_VCOM_DISABLE	(1 << 14)
-+#define LTV_VCOMOUT_ENABLE	(1 << 11)
-+#define LTV_POWER_ON		(1 <<  9)
-+#define LTV_DRIVE_CURRENT(x)	(((x) & 0x0007) << 4)	/* 0=off, 5=max */
-+#define LTV_SUPPLY_CURRENT(x)	(((x) & 0x0007) << 0)	/* 0=off, 5=max */
-+
-+/* Bit definitions for LTV_PWRCTL2 */
-+#define LTV_VCOML_ENABLE	(1 << 13)
-+#define LTV_VCOML_VOLTAGE(x)	(((x) & 0x001f) << 8)	/* 0=1V, 31=-1V */
-+#define LTV_VCOMH_VOLTAGE(x)	(((x) & 0x001f) << 0)	/* 0=3V, 31=4.5V */
-+
-+#endif /* __LTV350QV_H */
-diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
-index 0ce6ee9..d96b10f 100644
---- a/include/asm-arm/arch-at91/board.h
-+++ b/include/asm-arm/arch-at91/board.h
-@@ -64,6 +64,7 @@ extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
- 
-  /* Ethernet (EMAC & MACB) */
- struct at91_eth_data {
-+	u32		phy_mask;
- 	u8		phy_irq_pin;	/* PHY IRQ */
- 	u8		is_rmii;	/* using RMII interface? */
- };
-diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
-index 9fd2e32..9b36eb8 100644
---- a/include/asm-avr32/arch-at32ap/board.h
-+++ b/include/asm-avr32/arch-at32ap/board.h
-@@ -6,6 +6,8 @@
- 
- #include <linux/types.h>
- 
-+#define GPIO_PIN_NONE	(-1)
-+
- /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
- void at32_add_system_devices(void);
- 
-@@ -21,6 +23,7 @@ void at32_map_usart(unsigned int hw_id, unsigned int line);
- struct platform_device *at32_add_device_usart(unsigned int id);
- 
- struct eth_platform_data {
-+	u32	phy_mask;
- 	u8	is_rmii;
- };
- struct platform_device *
-@@ -30,9 +33,41 @@ struct spi_board_info;
- struct platform_device *
- at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
- 
-+struct platform_device *at32_add_device_twi(unsigned int id);
-+
-+struct mci_platform_data {
-+	int detect_pin;
-+	int wp_pin;
-+};
-+struct platform_device *
-+at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
-+
-+struct usba_platform_data {
-+	int vbus_pin;
-+};
-+struct platform_device *
-+at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
-+
- struct atmel_lcdfb_info;
- struct platform_device *
- at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
- 		     unsigned long fbmem_start, unsigned long fbmem_len);
- 
-+struct platform_device *at32_add_device_ac97c(unsigned int id);
-+struct platform_device *at32_add_device_abdac(unsigned int id);
-+
-+/* depending on what's hooked up, not all SSC pins will be used */
-+#define	ATMEL_SSC_TK		0x01
-+#define	ATMEL_SSC_TF		0x02
-+#define	ATMEL_SSC_TD		0x04
-+#define	ATMEL_SSC_TX		(ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
-+
-+#define	ATMEL_SSC_RK		0x10
-+#define	ATMEL_SSC_RF		0x20
-+#define	ATMEL_SSC_RD		0x40
-+#define	ATMEL_SSC_RX		(ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
-+
-+struct platform_device *
-+at32_add_device_ssc(unsigned int id, unsigned int flags);
-+
- #endif /* __ASM_ARCH_BOARD_H */
-diff --git a/include/asm-avr32/arch-at32ap/portmux.h b/include/asm-avr32/arch-at32ap/portmux.h
-index 9930871..0f95567 100644
---- a/include/asm-avr32/arch-at32ap/portmux.h
-+++ b/include/asm-avr32/arch-at32ap/portmux.h
-@@ -25,4 +25,16 @@ void at32_select_periph(unsigned int pin, unsigned int periph,
- void at32_select_gpio(unsigned int pin, unsigned long flags);
- void at32_reserve_pin(unsigned int pin);
- 
-+#ifdef CONFIG_GPIO_DEV
-+
-+/* Gang allocators and accessors; used by the GPIO /dev driver */
-+int at32_gpio_port_is_valid(unsigned int port);
-+int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask);
-+void at32_deselect_pins(unsigned int port, u32 pins);
-+
-+u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins);
-+void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask);
-+
-+#endif /* CONFIG_GPIO_DEV */
-+
- #endif /* __ASM_ARCH_PORTMUX_H__ */
-diff --git a/include/asm-avr32/arch-at32ap/sm.h b/include/asm-avr32/arch-at32ap/sm.h
-deleted file mode 100644
-index 265a9ea..0000000
---- a/include/asm-avr32/arch-at32ap/sm.h
-+++ /dev/null
-@@ -1,27 +0,0 @@
--/*
-- * AT32 System Manager interface.
-- *
-- * Copyright (C) 2006 Atmel Corporation
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--#ifndef __ASM_AVR32_AT32_SM_H__
--#define __ASM_AVR32_AT32_SM_H__
--
--struct irq_chip;
--struct platform_device;
--
--struct at32_sm {
--	spinlock_t lock;
--	void __iomem *regs;
--	struct irq_chip *eim_chip;
--	unsigned int eim_first_irq;
--	struct platform_device *pdev;
--};
--
--extern struct platform_device at32_sm_device;
--extern struct at32_sm system_manager;
--
--#endif /* __ASM_AVR32_AT32_SM_H__ */
-diff --git a/include/asm-avr32/atomic.h b/include/asm-avr32/atomic.h
-index b9c2548..7ef3862 100644
---- a/include/asm-avr32/atomic.h
-+++ b/include/asm-avr32/atomic.h
-@@ -101,7 +101,7 @@ static inline int atomic_sub_unless(atomic_t *v, int a, int u)
- 		"	mov	%1, 1\n"
- 		"1:"
- 		: "=&r"(tmp), "=&r"(result), "=o"(v->counter)
--		: "m"(v->counter), "rKs21"(a), "rKs21"(u)
-+		: "m"(v->counter), "rKs21"(a), "rKs21"(u), "1"(result)
- 		: "cc", "memory");
- 
- 	return result;
-@@ -137,7 +137,7 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
- 			"	mov	%1, 1\n"
- 			"1:"
- 			: "=&r"(tmp), "=&r"(result), "=o"(v->counter)
--			: "m"(v->counter), "r"(a), "ir"(u)
-+			: "m"(v->counter), "r"(a), "ir"(u), "1"(result)
- 			: "cc", "memory");
- 	}
- 
-diff --git a/include/asm-avr32/dma-controller.h b/include/asm-avr32/dma-controller.h
-new file mode 100644
-index 0000000..56a4965
---- /dev/null
-+++ b/include/asm-avr32/dma-controller.h
-@@ -0,0 +1,166 @@
-+/*
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ASM_AVR32_DMA_CONTROLLER_H
-+#define __ASM_AVR32_DMA_CONTROLLER_H
-+
-+#include <linux/device.h>
-+
-+#define DMA_DIR_MEM_TO_MEM		0x0000
-+#define DMA_DIR_MEM_TO_PERIPH		0x0001
-+#define DMA_DIR_PERIPH_TO_MEM		0x0002
-+#define DMA_DIR_PERIPH_TO_PERIPH	0x0003
-+
-+#define DMA_WIDTH_8BIT			0
-+#define DMA_WIDTH_16BIT			1
-+#define DMA_WIDTH_32BIT			2
-+
-+struct dma_request {
-+	struct dma_controller *dmac;
-+	struct list_head list;
-+
-+	unsigned short channel;
-+
-+	void (*xfer_complete)(struct dma_request *req);
-+	void (*block_complete)(struct dma_request *req);
-+	void (*error)(struct dma_request *req);
-+};
-+
-+struct dma_request_sg {
-+	struct dma_request req;
-+
-+	int nr_sg;
-+	struct scatterlist *sg;
-+	unsigned long block_size;
-+	unsigned int nr_blocks;
-+
-+	dma_addr_t data_reg;
-+	unsigned short periph_id;
-+
-+	unsigned char direction;
-+	unsigned char width;
-+};
-+#define to_dma_request_sg(_req)				\
-+	container_of(_req, struct dma_request_sg, req)
-+
-+struct dma_request_cyclic {
-+	struct dma_request req;
-+
-+        int periods;
-+	unsigned long buffer_size;
-+
-+        dma_addr_t buffer_start;
-+	dma_addr_t data_reg;
-+
-+	unsigned short periph_id;
-+	unsigned char direction;
-+	unsigned char width;
-+
-+        void *dev_id;
-+};
-+#define to_dma_request_cyclic(_req)				\
-+	container_of(_req, struct dma_request_cyclic, req)
-+
-+struct dma_request_memcpy {
-+	struct dma_request req;
-+
-+	dma_addr_t src_addr;
-+	unsigned int src_width;
-+	unsigned int src_stride;
-+
-+	dma_addr_t dst_addr;
-+	unsigned int dst_width;
-+	unsigned int dst_stride;
-+
-+	size_t length;
-+
-+	unsigned short src_reverse:1;
-+	unsigned short dst_reverse:1;
-+};
-+#define to_dma_request_memcpy(_req)				\
-+	container_of(_req, struct dma_request_memcpy, req)
-+
-+struct dma_controller {
-+	struct list_head list;
-+	int id;
-+	struct device *dev;
-+
-+	int (*alloc_channel)(struct dma_controller *dmac);
-+	void (*release_channel)(struct dma_controller *dmac,
-+				int channel);
-+	int (*prepare_request_sg)(struct dma_controller *dmac,
-+				  struct dma_request_sg *req);
-+        int (*prepare_request_cyclic)(struct dma_controller *dmac,
-+				      struct dma_request_cyclic *req);
-+	int (*prepare_request_memcpy)(struct dma_controller *dmac,
-+				      struct dma_request_memcpy *req);
-+	int (*start_request)(struct dma_controller *dmac,
-+			     unsigned int channel);
-+	int (*stop_request)(struct dma_controller *dmac,
-+                            unsigned int channel);
-+        dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
-+                                      unsigned int channel);
-+};
-+
-+static inline int
-+dma_alloc_channel(struct dma_controller *dmac)
-+{
-+	return dmac->alloc_channel(dmac);
-+}
-+
-+static inline void
-+dma_release_channel(struct dma_controller *dmac, int chan)
-+{
-+	dmac->release_channel(dmac, chan);
-+}
-+
-+static inline int
-+dma_prepare_request_sg(struct dma_controller *dmac,
-+		       struct dma_request_sg *req)
-+{
-+	return dmac->prepare_request_sg(dmac, req);
-+}
-+
-+static inline int
-+dma_prepare_request_cyclic(struct dma_controller *dmac,
-+			   struct dma_request_cyclic *req)
-+{
-+	return dmac->prepare_request_cyclic(dmac, req);
-+}
-+
-+static inline int
-+dma_prepare_request_memcpy(struct dma_controller *dmac,
-+			   struct dma_request_memcpy *req)
-+{
-+	return dmac->prepare_request_memcpy(dmac, req);
-+}
-+
-+static inline int
-+dma_start_request(struct dma_controller *dmac,
-+		  unsigned int channel)
-+{
-+	return dmac->start_request(dmac, channel);
-+}
-+
-+static inline int
-+dma_stop_request(struct dma_controller *dmac,
-+                 unsigned int channel)
-+{
-+	return dmac->stop_request(dmac, channel);
-+}
-+
-+static inline dma_addr_t
-+dma_get_current_pos(struct dma_controller *dmac,
-+                    unsigned int channel)
-+{
-+	return dmac->get_current_pos(dmac, channel);
-+}
-+
-+extern int register_dma_controller(struct dma_controller *dmac);
-+extern struct dma_controller *find_dma_controller(int id);
-+
-+#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
-diff --git a/include/asm-avr32/unaligned.h b/include/asm-avr32/unaligned.h
-index 3042723..36f5fd4 100644
---- a/include/asm-avr32/unaligned.h
-+++ b/include/asm-avr32/unaligned.h
-@@ -7,19 +7,10 @@
-  * words, but halfwords must be halfword-aligned, and doublewords must
-  * be word-aligned.
-  *
-- * TODO: Make all this CPU-specific and optimize.
-+ * However, swapped word loads must be word-aligned so we can't
-+ * optimize word loads in general.
-  */
- 
--#include <linux/string.h>
--
--/* Use memmove here, so gcc does not insert a __builtin_memcpy. */
--
--#define get_unaligned(ptr) \
--  ({ __typeof__(*(ptr)) __tmp; memmove(&__tmp, (ptr), sizeof(*(ptr))); __tmp; })
--
--#define put_unaligned(val, ptr)				\
--  ({ __typeof__(*(ptr)) __tmp = (val);			\
--     memmove((ptr), &__tmp, sizeof(*(ptr)));		\
--     (void)0; })
-+#include <asm-generic/unaligned.h>
- 
- #endif /* __ASM_AVR32_UNALIGNED_H */
-diff --git a/include/linux/atmel-ssc.h b/include/linux/atmel-ssc.h
-new file mode 100644
-index 0000000..0602339
---- /dev/null
-+++ b/include/linux/atmel-ssc.h
-@@ -0,0 +1,312 @@
-+#ifndef __INCLUDE_ATMEL_SSC_H
-+#define __INCLUDE_ATMEL_SSC_H
-+
-+#include <linux/platform_device.h>
-+#include <linux/list.h>
-+
-+struct ssc_device {
-+	struct list_head	list;
-+	void __iomem		*regs;
-+	struct platform_device	*pdev;
-+	struct clk		*clk;
-+	int			user;
-+	int			irq;
-+};
-+
-+struct ssc_device * __must_check ssc_request(unsigned int ssc_num);
-+void ssc_free(struct ssc_device *ssc);
-+
-+/* SSC register offsets */
-+
-+/* SSC Control Register */
-+#define SSC_CR				0x00000000
-+#define SSC_CR_RXDIS_SIZE			 1
-+#define SSC_CR_RXDIS_OFFSET			 1
-+#define SSC_CR_RXEN_SIZE			 1
-+#define SSC_CR_RXEN_OFFSET			 0
-+#define SSC_CR_SWRST_SIZE			 1
-+#define SSC_CR_SWRST_OFFSET			15
-+#define SSC_CR_TXDIS_SIZE			 1
-+#define SSC_CR_TXDIS_OFFSET			 9
-+#define SSC_CR_TXEN_SIZE			 1
-+#define SSC_CR_TXEN_OFFSET			 8
-+
-+/* SSC Clock Mode Register */
-+#define SSC_CMR				0x00000004
-+#define SSC_CMR_DIV_SIZE			12
-+#define SSC_CMR_DIV_OFFSET			 0
-+
-+/* SSC Receive Clock Mode Register */
-+#define SSC_RCMR			0x00000010
-+#define SSC_RCMR_CKG_SIZE			 2
-+#define SSC_RCMR_CKG_OFFSET			 6
-+#define SSC_RCMR_CKI_SIZE			 1
-+#define SSC_RCMR_CKI_OFFSET			 5
-+#define SSC_RCMR_CKO_SIZE			 3
-+#define SSC_RCMR_CKO_OFFSET			 2
-+#define SSC_RCMR_CKS_SIZE			 2
-+#define SSC_RCMR_CKS_OFFSET			 0
-+#define SSC_RCMR_PERIOD_SIZE			 8
-+#define SSC_RCMR_PERIOD_OFFSET			24
-+#define SSC_RCMR_START_SIZE			 4
-+#define SSC_RCMR_START_OFFSET			 8
-+#define SSC_RCMR_STOP_SIZE			 1
-+#define SSC_RCMR_STOP_OFFSET			12
-+#define SSC_RCMR_STTDLY_SIZE			 8
-+#define SSC_RCMR_STTDLY_OFFSET			16
-+
-+/* SSC Receive Frame Mode Register */
-+#define SSC_RFMR			0x00000014
-+#define SSC_RFMR_DATLEN_SIZE			 5
-+#define SSC_RFMR_DATLEN_OFFSET			 0
-+#define SSC_RFMR_DATNB_SIZE			 4
-+#define SSC_RFMR_DATNB_OFFSET			 8
-+#define SSC_RFMR_FSEDGE_SIZE			 1
-+#define SSC_RFMR_FSEDGE_OFFSET			24
-+#define SSC_RFMR_FSLEN_SIZE			 4
-+#define SSC_RFMR_FSLEN_OFFSET			16
-+#define SSC_RFMR_FSOS_SIZE			 4
-+#define SSC_RFMR_FSOS_OFFSET			20
-+#define SSC_RFMR_LOOP_SIZE			 1
-+#define SSC_RFMR_LOOP_OFFSET			 5
-+#define SSC_RFMR_MSBF_SIZE			 1
-+#define SSC_RFMR_MSBF_OFFSET			 7
-+
-+/* SSC Transmit Clock Mode Register */
-+#define SSC_TCMR			0x00000018
-+#define SSC_TCMR_CKG_SIZE			 2
-+#define SSC_TCMR_CKG_OFFSET			 6
-+#define SSC_TCMR_CKI_SIZE			 1
-+#define SSC_TCMR_CKI_OFFSET			 5
-+#define SSC_TCMR_CKO_SIZE			 3
-+#define SSC_TCMR_CKO_OFFSET			 2
-+#define SSC_TCMR_CKS_SIZE			 2
-+#define SSC_TCMR_CKS_OFFSET			 0
-+#define SSC_TCMR_PERIOD_SIZE			 8
-+#define SSC_TCMR_PERIOD_OFFSET			24
-+#define SSC_TCMR_START_SIZE			 4
-+#define SSC_TCMR_START_OFFSET			 8
-+#define SSC_TCMR_STTDLY_SIZE			 8
-+#define SSC_TCMR_STTDLY_OFFSET			16
-+
-+/* SSC Transmit Frame Mode Register */
-+#define SSC_TFMR			0x0000001c
-+#define SSC_TFMR_DATDEF_SIZE			 1
-+#define SSC_TFMR_DATDEF_OFFSET			 5
-+#define SSC_TFMR_DATLEN_SIZE			 5
-+#define SSC_TFMR_DATLEN_OFFSET			 0
-+#define SSC_TFMR_DATNB_SIZE			 4
-+#define SSC_TFMR_DATNB_OFFSET			 8
-+#define SSC_TFMR_FSDEN_SIZE			 1
-+#define SSC_TFMR_FSDEN_OFFSET			23
-+#define SSC_TFMR_FSEDGE_SIZE			 1
-+#define SSC_TFMR_FSEDGE_OFFSET			24
-+#define SSC_TFMR_FSLEN_SIZE			 4
-+#define SSC_TFMR_FSLEN_OFFSET			16
-+#define SSC_TFMR_FSOS_SIZE			 3
-+#define SSC_TFMR_FSOS_OFFSET			20
-+#define SSC_TFMR_MSBF_SIZE			 1
-+#define SSC_TFMR_MSBF_OFFSET			 7
-+
-+/* SSC Receive Hold Register */
-+#define SSC_RHR				0x00000020
-+#define SSC_RHR_RDAT_SIZE			32
-+#define SSC_RHR_RDAT_OFFSET			 0
-+
-+/* SSC Transmit Hold Register */
-+#define SSC_THR				0x00000024
-+#define SSC_THR_TDAT_SIZE			32
-+#define SSC_THR_TDAT_OFFSET			 0
-+
-+/* SSC Receive Sync. Holding Register */
-+#define SSC_RSHR			0x00000030
-+#define SSC_RSHR_RSDAT_SIZE			16
-+#define SSC_RSHR_RSDAT_OFFSET			 0
-+
-+/* SSC Transmit Sync. Holding Register */
-+#define SSC_TSHR			0x00000034
-+#define SSC_TSHR_TSDAT_SIZE			16
-+#define SSC_TSHR_RSDAT_OFFSET			 0
-+
-+/* SSC Receive Compare 0 Register */
-+#define SSC_RC0R			0x00000038
-+#define SSC_RC0R_CP0_SIZE			16
-+#define SSC_RC0R_CP0_OFFSET			 0
-+
-+/* SSC Receive Compare 1 Register */
-+#define SSC_RC1R			0x0000003c
-+#define SSC_RC1R_CP1_SIZE			16
-+#define SSC_RC1R_CP1_OFFSET			 0
-+
-+/* SSC Status Register */
-+#define SSC_SR				0x00000040
-+#define SSC_SR_CP0_SIZE				 1
-+#define SSC_SR_CP0_OFFSET			 8
-+#define SSC_SR_CP1_SIZE				 1
-+#define SSC_SR_CP1_OFFSET			 9
-+#define SSC_SR_ENDRX_SIZE			 1
-+#define SSC_SR_ENDRX_OFFSET			 6
-+#define SSC_SR_ENDTX_SIZE			 1
-+#define SSC_SR_ENDTX_OFFSET			 2
-+#define SSC_SR_OVRUN_SIZE			 1
-+#define SSC_SR_OVRUN_OFFSET			 5
-+#define SSC_SR_RXBUFF_SIZE			 1
-+#define SSC_SR_RXBUFF_OFFSET			 7
-+#define SSC_SR_RXEN_SIZE			 1
-+#define SSC_SR_RXEN_OFFSET			17
-+#define SSC_SR_RXRDY_SIZE			 1
-+#define SSC_SR_RXRDY_OFFSET			 4
-+#define SSC_SR_RXSYN_SIZE			 1
-+#define SSC_SR_RXSYN_OFFSET			11
-+#define SSC_SR_TXBUFE_SIZE			 1
-+#define SSC_SR_TXBUFE_OFFSET			 3
-+#define SSC_SR_TXEMPTY_SIZE			 1
-+#define SSC_SR_TXEMPTY_OFFSET			 1
-+#define SSC_SR_TXEN_SIZE			 1
-+#define SSC_SR_TXEN_OFFSET			16
-+#define SSC_SR_TXRDY_SIZE			 1
-+#define SSC_SR_TXRDY_OFFSET			 0
-+#define SSC_SR_TXSYN_SIZE			 1
-+#define SSC_SR_TXSYN_OFFSET			10
-+
-+/* SSC Interrupt Enable Register */
-+#define SSC_IER				0x00000044
-+#define SSC_IER_CP0_SIZE			 1
-+#define SSC_IER_CP0_OFFSET			 8
-+#define SSC_IER_CP1_SIZE			 1
-+#define SSC_IER_CP1_OFFSET			 9
-+#define SSC_IER_ENDRX_SIZE			 1
-+#define SSC_IER_ENDRX_OFFSET			 6
-+#define SSC_IER_ENDTX_SIZE			 1
-+#define SSC_IER_ENDTX_OFFSET			 2
-+#define SSC_IER_OVRUN_SIZE			 1
-+#define SSC_IER_OVRUN_OFFSET			 5
-+#define SSC_IER_RXBUFF_SIZE			 1
-+#define SSC_IER_RXBUFF_OFFSET			 7
-+#define SSC_IER_RXRDY_SIZE			 1
-+#define SSC_IER_RXRDY_OFFSET			 4
-+#define SSC_IER_RXSYN_SIZE			 1
-+#define SSC_IER_RXSYN_OFFSET			11
-+#define SSC_IER_TXBUFE_SIZE			 1
-+#define SSC_IER_TXBUFE_OFFSET			 3
-+#define SSC_IER_TXEMPTY_SIZE			 1
-+#define SSC_IER_TXEMPTY_OFFSET			 1
-+#define SSC_IER_TXRDY_SIZE			 1
-+#define SSC_IER_TXRDY_OFFSET			 0
-+#define SSC_IER_TXSYN_SIZE			 1
-+#define SSC_IER_TXSYN_OFFSET			10
-+
-+/* SSC Interrupt Disable Register */
-+#define SSC_IDR				0x00000048
-+#define SSC_IDR_CP0_SIZE			 1
-+#define SSC_IDR_CP0_OFFSET			 8
-+#define SSC_IDR_CP1_SIZE			 1
-+#define SSC_IDR_CP1_OFFSET			 9
-+#define SSC_IDR_ENDRX_SIZE			 1
-+#define SSC_IDR_ENDRX_OFFSET			 6
-+#define SSC_IDR_ENDTX_SIZE			 1
-+#define SSC_IDR_ENDTX_OFFSET			 2
-+#define SSC_IDR_OVRUN_SIZE			 1
-+#define SSC_IDR_OVRUN_OFFSET			 5
-+#define SSC_IDR_RXBUFF_SIZE			 1
-+#define SSC_IDR_RXBUFF_OFFSET			 7
-+#define SSC_IDR_RXRDY_SIZE			 1
-+#define SSC_IDR_RXRDY_OFFSET			 4
-+#define SSC_IDR_RXSYN_SIZE			 1
-+#define SSC_IDR_RXSYN_OFFSET			11
-+#define SSC_IDR_TXBUFE_SIZE			 1
-+#define SSC_IDR_TXBUFE_OFFSET			 3
-+#define SSC_IDR_TXEMPTY_SIZE			 1
-+#define SSC_IDR_TXEMPTY_OFFSET			 1
-+#define SSC_IDR_TXRDY_SIZE			 1
-+#define SSC_IDR_TXRDY_OFFSET			 0
-+#define SSC_IDR_TXSYN_SIZE			 1
-+#define SSC_IDR_TXSYN_OFFSET			10
-+
-+/* SSC Interrupt Mask Register */
-+#define SSC_IMR				0x0000004c
-+#define SSC_IMR_CP0_SIZE			 1
-+#define SSC_IMR_CP0_OFFSET			 8
-+#define SSC_IMR_CP1_SIZE			 1
-+#define SSC_IMR_CP1_OFFSET			 9
-+#define SSC_IMR_ENDRX_SIZE			 1
-+#define SSC_IMR_ENDRX_OFFSET			 6
-+#define SSC_IMR_ENDTX_SIZE			 1
-+#define SSC_IMR_ENDTX_OFFSET			 2
-+#define SSC_IMR_OVRUN_SIZE			 1
-+#define SSC_IMR_OVRUN_OFFSET			 5
-+#define SSC_IMR_RXBUFF_SIZE			 1
-+#define SSC_IMR_RXBUFF_OFFSET			 7
-+#define SSC_IMR_RXRDY_SIZE			 1
-+#define SSC_IMR_RXRDY_OFFSET			 4
-+#define SSC_IMR_RXSYN_SIZE			 1
-+#define SSC_IMR_RXSYN_OFFSET			11
-+#define SSC_IMR_TXBUFE_SIZE			 1
-+#define SSC_IMR_TXBUFE_OFFSET			 3
-+#define SSC_IMR_TXEMPTY_SIZE			 1
-+#define SSC_IMR_TXEMPTY_OFFSET			 1
-+#define SSC_IMR_TXRDY_SIZE			 1
-+#define SSC_IMR_TXRDY_OFFSET			 0
-+#define SSC_IMR_TXSYN_SIZE			 1
-+#define SSC_IMR_TXSYN_OFFSET			10
-+
-+/* SSC PDC Receive Pointer Register */
-+#define SSC_PDC_RPR			0x00000100
-+
-+/* SSC PDC Receive Counter Register */
-+#define SSC_PDC_RCR			0x00000104
-+
-+/* SSC PDC Transmit Pointer Register */
-+#define SSC_PDC_TPR			0x00000108
-+
-+/* SSC PDC Receive Next Pointer Register */
-+#define SSC_PDC_RNPR			0x00000110
-+
-+/* SSC PDC Receive Next Counter Register */
-+#define SSC_PDC_RNCR			0x00000114
-+
-+/* SSC PDC Transmit Counter Register */
-+#define SSC_PDC_TCR			0x0000010c
-+
-+/* SSC PDC Transmit Next Pointer Register */
-+#define SSC_PDC_TNPR			0x00000118
-+
-+/* SSC PDC Transmit Next Counter Register */
-+#define SSC_PDC_TNCR			0x0000011c
-+
-+/* SSC PDC Transfer Control Register */
-+#define SSC_PDC_PTCR			0x00000120
-+#define SSC_PDC_PTCR_RXTDIS_SIZE		 1
-+#define SSC_PDC_PTCR_RXTDIS_OFFSET		 1
-+#define SSC_PDC_PTCR_RXTEN_SIZE			 1
-+#define SSC_PDC_PTCR_RXTEN_OFFSET		 0
-+#define SSC_PDC_PTCR_TXTDIS_SIZE		 1
-+#define SSC_PDC_PTCR_TXTDIS_OFFSET		 9
-+#define SSC_PDC_PTCR_TXTEN_SIZE			 1
-+#define SSC_PDC_PTCR_TXTEN_OFFSET		 8
-+
-+/* SSC PDC Transfer Status Register */
-+#define SSC_PDC_PTSR			0x00000124
-+#define SSC_PDC_PTSR_RXTEN_SIZE			 1
-+#define SSC_PDC_PTSR_RXTEN_OFFSET		 0
-+#define SSC_PDC_PTSR_TXTEN_SIZE			 1
-+#define SSC_PDC_PTSR_TXTEN_OFFSET		 8
-+
-+/* Bit manipulation macros */
-+#define SSC_BIT(name)					\
-+	(1 << SSC_##name##_OFFSET)
-+#define SSC_BF(name, value)				\
-+	(((value) & ((1 << SSC_##name##_SIZE) - 1))	\
-+	 << SSC_##name##_OFFSET)
-+#define SSC_BFEXT(name, value)				\
-+	(((value) >> SSC_##name##_OFFSET)		\
-+	 & ((1 << SSC_##name##_SIZE) - 1))
-+#define SSC_BFINS(name, value, old)			\
-+	(((old) & ~(((1 << SSC_##name##_SIZE) - 1)	\
-+	<< SSC_##name##_OFFSET)) | SSC_BF(name, value))
-+
-+/* Register access macros */
-+#define ssc_readl(base, reg)		__raw_readl(base + SSC_##reg)
-+#define ssc_writel(base, reg, value)	__raw_writel((value), base + SSC_##reg)
-+
-+#endif /* __INCLUDE_ATMEL_SSC_H */
-diff --git a/include/linux/gpio_mouse.h b/include/linux/gpio_mouse.h
-new file mode 100644
-index 0000000..44ed7aa
---- /dev/null
-+++ b/include/linux/gpio_mouse.h
-@@ -0,0 +1,61 @@
-+/*
-+ * Driver for simulating a mouse on GPIO lines.
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef _GPIO_MOUSE_H
-+#define _GPIO_MOUSE_H
-+
-+#define GPIO_MOUSE_POLARITY_ACT_HIGH	0x00
-+#define GPIO_MOUSE_POLARITY_ACT_LOW	0x01
-+
-+#define GPIO_MOUSE_PIN_UP	0
-+#define GPIO_MOUSE_PIN_DOWN	1
-+#define GPIO_MOUSE_PIN_LEFT	2
-+#define GPIO_MOUSE_PIN_RIGHT	3
-+#define GPIO_MOUSE_PIN_BLEFT	4
-+#define GPIO_MOUSE_PIN_BMIDDLE	5
-+#define GPIO_MOUSE_PIN_BRIGHT	6
-+#define GPIO_MOUSE_PIN_MAX	7
-+
-+/**
-+ * struct gpio_mouse_platform_data
-+ * @scan_ms: integer in ms specifying the scan periode.
-+ * @polarity: Pin polarity, active high or low.
-+ * @up: GPIO line for up value.
-+ * @down: GPIO line for down value.
-+ * @left: GPIO line for left value.
-+ * @right: GPIO line for right value.
-+ * @bleft: GPIO line for left button.
-+ * @bmiddle: GPIO line for middle button.
-+ * @bright: GPIO line for right button.
-+ *
-+ * This struct must be added to the platform_device in the board code.
-+ * It is used by the gpio_mouse driver to setup GPIO lines and to
-+ * calculate mouse movement.
-+ */
-+struct gpio_mouse_platform_data {
-+	int scan_ms;
-+	int polarity;
-+
-+	union {
-+		struct {
-+			int up;
-+			int down;
-+			int left;
-+			int right;
-+
-+			int bleft;
-+			int bmiddle;
-+			int bright;
-+		};
-+		int pins[GPIO_MOUSE_PIN_MAX];
-+	};
-+};
-+
-+#endif /* _GPIO_MOUSE_H */
-diff --git a/include/linux/leds.h b/include/linux/leds.h
-index 88afcef..059abfe 100644
---- a/include/linux/leds.h
-+++ b/include/linux/leds.h
-@@ -110,4 +110,18 @@ extern void ledtrig_ide_activity(void);
- #define ledtrig_ide_activity() do {} while(0)
- #endif
- 
-+/* For the leds-gpio driver */
-+struct gpio_led {
-+	const char *name;
-+	char *default_trigger;
-+	unsigned 	gpio;
-+	u8 		active_low;
-+};
-+
-+struct gpio_led_platform_data {
-+	int 		num_leds;
-+	struct gpio_led *leds;
-+};
-+
-+
- #endif		/* __LINUX_LEDS_H_INCLUDED */
-diff --git a/include/linux/spi/at73c213.h b/include/linux/spi/at73c213.h
-new file mode 100644
-index 0000000..0f20a70
---- /dev/null
-+++ b/include/linux/spi/at73c213.h
-@@ -0,0 +1,25 @@
-+/*
-+ * Board-specific data used to set up AT73c213 audio DAC driver.
-+ */
-+
-+#ifndef __LINUX_SPI_AT73C213_H
-+#define __LINUX_SPI_AT73C213_H
-+
-+/**
-+ * at73c213_board_info - how the external DAC is wired to the device.
-+ *
-+ * @ssc_id: SSC platform_driver id the DAC shall use to stream the audio.
-+ * @dac_clk: the external clock used to provide master clock to the DAC.
-+ * @shortname: a short discription for the DAC, seen by userspace tools.
-+ *
-+ * This struct contains the configuration of the hardware connection to the
-+ * external DAC. The DAC needs a master clock and a I2S audio stream. It also
-+ * provides a name which is used to identify it in userspace tools.
-+ */
-+struct at73c213_board_info {
-+	int		ssc_id;
-+	struct clk	*dac_clk;
-+	char		shortname[32];
-+};
-+
-+#endif /* __LINUX_SPI_AT73C213_H */
-diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild
-index 43f160c..6ce42bf 100644
---- a/include/linux/usb/Kbuild
-+++ b/include/linux/usb/Kbuild
-@@ -1,5 +1,6 @@
- unifdef-y += audio.h
- unifdef-y += cdc.h
- unifdef-y += ch9.h
-+unifdef-y += gadgetfs.h
- unifdef-y += midi.h
- 
-diff --git a/include/linux/usb/gadgetfs.h b/include/linux/usb/gadgetfs.h
-new file mode 100644
-index 0000000..e8654c3
---- /dev/null
-+++ b/include/linux/usb/gadgetfs.h
-@@ -0,0 +1,81 @@
-+#ifndef __LINUX_USB_GADGETFS_H
-+#define __LINUX_USB_GADGETFS_H
-+
-+#include <asm/types.h>
-+#include <asm/ioctl.h>
-+
-+#include <linux/usb/ch9.h>
-+
-+/*
-+ * Filesystem based user-mode API to USB Gadget controller hardware
-+ *
-+ * Other than ep0 operations, most things are done by read() and write()
-+ * on endpoint files found in one directory.  They are configured by
-+ * writing descriptors, and then may be used for normal stream style
-+ * i/o requests.  When ep0 is configured, the device can enumerate;
-+ * when it's closed, the device disconnects from usb.  Operations on
-+ * ep0 require ioctl() operations.
-+ *
-+ * Configuration and device descriptors get written to /dev/gadget/$CHIP,
-+ * which may then be used to read usb_gadgetfs_event structs.  The driver
-+ * may activate endpoints as it handles SET_CONFIGURATION setup events,
-+ * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
-+ * then performing data transfers by reading or writing.
-+ */
-+
-+/*
-+ * Events are delivered on the ep0 file descriptor, when the user mode driver
-+ * reads from this file descriptor after writing the descriptors.  Don't
-+ * stop polling this descriptor.
-+ */
-+
-+enum usb_gadgetfs_event_type {
-+	GADGETFS_NOP = 0,
-+
-+	GADGETFS_CONNECT,
-+	GADGETFS_DISCONNECT,
-+	GADGETFS_SETUP,
-+	GADGETFS_SUSPEND,
-+	// and likely more !
-+};
-+
-+/* NOTE:  this structure must stay the same size and layout on
-+ * both 32-bit and 64-bit kernels.
-+ */
-+struct usb_gadgetfs_event {
-+	union {
-+		// NOP, DISCONNECT, SUSPEND: nothing
-+		// ... some hardware can't report disconnection
-+
-+		// CONNECT: just the speed
-+		enum usb_device_speed	speed;
-+
-+		// SETUP: packet; DATA phase i/o precedes next event
-+		// (setup.bmRequestType & USB_DIR_IN) flags direction
-+		// ... includes SET_CONFIGURATION, SET_INTERFACE
-+		struct usb_ctrlrequest	setup;
-+	} u;
-+	enum usb_gadgetfs_event_type	type;
-+};
-+
-+
-+/* endpoint ioctls */
-+
-+/* IN transfers may be reported to the gadget driver as complete
-+ *	when the fifo is loaded, before the host reads the data;
-+ * OUT transfers may be reported to the host's "client" driver as
-+ *	complete when they're sitting in the FIFO unread.
-+ * THIS returns how many bytes are "unclaimed" in the endpoint fifo
-+ * (needed for precise fault handling, when the hardware allows it)
-+ */
-+#define	GADGETFS_FIFO_STATUS	_IO('g',1)
-+
-+/* discards any unclaimed data in the fifo. */
-+#define	GADGETFS_FIFO_FLUSH	_IO('g',2)
-+
-+/* resets endpoint halt+toggle; used to implement set_interface.
-+ * some hardware (like pxa2xx) can't support this.
-+ */
-+#define	GADGETFS_CLEAR_HALT	_IO('g',3)
-+
-+#endif /* __LINUX_USB_GADGETFS_H */
-diff --git a/include/linux/usb_gadgetfs.h b/include/linux/usb_gadgetfs.h
-deleted file mode 100644
-index 8086d5a..0000000
---- a/include/linux/usb_gadgetfs.h
-+++ /dev/null
-@@ -1,75 +0,0 @@
--
--#include <asm/types.h>
--#include <asm/ioctl.h>
--
--#include <linux/usb/ch9.h>
--
--/*
-- * Filesystem based user-mode API to USB Gadget controller hardware
-- *
-- * Almost everything can be done with only read and write operations,
-- * on endpoint files found in one directory.  They are configured by
-- * writing descriptors, and then may be used for normal stream style
-- * i/o requests.  When ep0 is configured, the device can enumerate;
-- * when it's closed, the device disconnects from usb.
-- *
-- * Configuration and device descriptors get written to /dev/gadget/$CHIP,
-- * which may then be used to read usb_gadgetfs_event structs.  The driver
-- * may activate endpoints as it handles SET_CONFIGURATION setup events,
-- * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
-- * then performing data transfers by reading or writing.
-- */
--
--/*
-- * Events are delivered on the ep0 file descriptor, if the user mode driver
-- * reads from this file descriptor after writing the descriptors.  Don't
-- * stop polling this descriptor, if you write that kind of driver.
-- */
--
--enum usb_gadgetfs_event_type {
--	GADGETFS_NOP = 0,
--
--	GADGETFS_CONNECT,
--	GADGETFS_DISCONNECT,
--	GADGETFS_SETUP,
--	GADGETFS_SUSPEND,
--	// and likely more !
--};
--
--struct usb_gadgetfs_event {
--	enum usb_gadgetfs_event_type	type;
--	union {
--		// NOP, DISCONNECT, SUSPEND: nothing
--		// ... some hardware can't report disconnection
--
--		// CONNECT: just the speed
--		enum usb_device_speed	speed;
--
--		// SETUP: packet; DATA phase i/o precedes next event
--		// (setup.bmRequestType & USB_DIR_IN) flags direction 
--		// ... includes SET_CONFIGURATION, SET_INTERFACE
--		struct usb_ctrlrequest	setup;
--	} u;
--};
--
--
--/* endpoint ioctls */
--
--/* IN transfers may be reported to the gadget driver as complete
-- * 	when the fifo is loaded, before the host reads the data;
-- * OUT transfers may be reported to the host's "client" driver as
-- * 	complete when they're sitting in the FIFO unread.
-- * THIS returns how many bytes are "unclaimed" in the endpoint fifo
-- * (needed for precise fault handling, when the hardware allows it)
-- */
--#define	GADGETFS_FIFO_STATUS	_IO('g',1)
--
--/* discards any unclaimed data in the fifo. */
--#define	GADGETFS_FIFO_FLUSH	_IO('g',2)
--
--/* resets endpoint halt+toggle; used to implement set_interface.
-- * some hardware (like pxa2xx) can't support this.
-- */
--#define	GADGETFS_CLEAR_HALT	_IO('g',3)
--
--
-diff --git a/init/do_mounts.c b/init/do_mounts.c
-index 46fe407..efc134c 100644
---- a/init/do_mounts.c
-+++ b/init/do_mounts.c
-@@ -25,6 +25,7 @@ int __initdata rd_doload;	/* 1 = load RAM disk, 0 = don't load */
- int root_mountflags = MS_RDONLY | MS_SILENT;
- char * __initdata root_device_name;
- static char __initdata saved_root_name[64];
-+int __initdata root_wait;
- 
- dev_t ROOT_DEV;
- 
-@@ -216,6 +217,14 @@ static int __init root_dev_setup(char *line)
- 
- __setup("root=", root_dev_setup);
- 
-+static int __init rootwait_setup(char *line)
-+{
-+	root_wait = simple_strtol(line,NULL,0);
-+	return 1;
-+}
-+
-+__setup("rootwait=", rootwait_setup);
-+
- static char * __initdata root_mount_data;
- static int __init root_data_setup(char *str)
- {
-@@ -438,11 +447,24 @@ void __init prepare_namespace(void)
- 			root_device_name += 5;
- 	}
- 
--	is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
--
- 	if (initrd_load())
- 		goto out;
- 
-+	/* wait for any asynchronous scanning to complete */
-+	if ((ROOT_DEV == 0) && root_wait) {
-+		printk(KERN_INFO "Waiting for root device %s...\n",
-+			saved_root_name);
-+		do {
-+			while (driver_probe_done() != 0)
-+				msleep(100);
-+			ROOT_DEV = name_to_dev_t(saved_root_name);
-+			if (ROOT_DEV == 0)
-+				msleep(100);
-+		} while (ROOT_DEV == 0);
-+	}
-+
-+	is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
-+
- 	if (is_floppy && rd_doload && rd_load_disk(0))
- 		ROOT_DEV = Root_RAM0;
- 
-diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl
-index f7844f6..6631586 100755
---- a/scripts/checkstack.pl
-+++ b/scripts/checkstack.pl
-@@ -12,6 +12,7 @@
- #	sh64 port by Paul Mundt
- #	Random bits by Matt Mackall <mpm@selenic.com>
- #	M68k port by Geert Uytterhoeven and Andreas Schwab
-+#	AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com>
- #
- #	Usage:
- #	objdump -d vmlinux | stackcheck.pl [arch]
-@@ -37,6 +38,10 @@ my (@stack, $re, $x, $xs);
- 	if ($arch eq 'arm') {
- 		#c0008ffc:	e24dd064	sub	sp, sp, #100	; 0x64
- 		$re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o;
-+	} elsif ($arch eq 'avr32') {
-+		#8000008a:       20 1d           sub sp,4
-+		#80000ca8:       fa cd 05 b0     sub sp,sp,1456
-+		$re = qr/^.*sub.*sp.*,([0-9]{1,8})/o;
- 	} elsif ($arch =~ /^i[3456]86$/) {
- 		#c0105234:       81 ec ac 05 00 00       sub    $0x5ac,%esp
- 		$re = qr/^.*[as][du][db]    \$(0x$x{1,8}),\%esp$/o;
-diff --git a/sound/Kconfig b/sound/Kconfig
-index 9ea4738..9217739 100644
---- a/sound/Kconfig
-+++ b/sound/Kconfig
-@@ -63,9 +63,13 @@ source "sound/aoa/Kconfig"
- 
- source "sound/arm/Kconfig"
- 
-+if SPI
-+source "sound/spi/Kconfig"
-+endif
-+
- source "sound/mips/Kconfig"
- 
--# the following will depend on the order of config.
-+# tee following will depend on the order of config.
- # here assuming USB is defined before ALSA
- source "sound/usb/Kconfig"
- 
-diff --git a/sound/Makefile b/sound/Makefile
-index b7c7fb7..581ea5e 100644
---- a/sound/Makefile
-+++ b/sound/Makefile
-@@ -5,7 +5,8 @@ obj-$(CONFIG_SOUND) += soundcore.o
- obj-$(CONFIG_SOUND_PRIME) += sound_firmware.o
- obj-$(CONFIG_SOUND_PRIME) += oss/
- obj-$(CONFIG_DMASOUND) += oss/
--obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ sparc/ parisc/ pcmcia/ mips/ soc/
-+obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ \
-+		      sparc/ spi/ parisc/ pcmcia/ mips/ soc/
- obj-$(CONFIG_SND_AOA) += aoa/
- 
- # This one must be compilable even if sound is configured out
-diff --git a/sound/spi/Kconfig b/sound/spi/Kconfig
-new file mode 100644
-index 0000000..0d08c29
---- /dev/null
-+++ b/sound/spi/Kconfig
-@@ -0,0 +1,31 @@
-+#SPI drivers
-+
-+menu "SPI devices"
-+	depends on SND != n
-+
-+config SND_AT73C213
-+	tristate "Atmel AT73C213 DAC driver"
-+	depends on ATMEL_SSC
-+	select SND_PCM
-+	help
-+	  Say Y here if you want to use the Atmel AT73C213 external DAC. This
-+	  DAC can be found on Atmel development boards.
-+
-+	  This driver requires the Atmel SSC driver for sound sink, a
-+	  peripheral found on most AT91 and AVR32 microprocessors.
-+
-+	  To compile this driver as a module, choose M here: the module will be
-+	  called snd-at73c213.
-+
-+config SND_AT73C213_TARGET_BITRATE
-+	int "Target bitrate for AT73C213"
-+	depends on SND_AT73C213
-+	default "48000"
-+	range 8000 50000
-+	help
-+	  Sets the target bitrate for the bitrate calculator in the driver.
-+	  Limited by hardware to be between 8000 Hz and 50000 Hz.
-+
-+	  Set to 48000 Hz by default.
-+
-+endmenu
-diff --git a/sound/spi/Makefile b/sound/spi/Makefile
-new file mode 100644
-index 0000000..026fb73
---- /dev/null
-+++ b/sound/spi/Makefile
-@@ -0,0 +1,5 @@
-+# Makefile for SPI drivers
-+
-+snd-at73c213-objs		:= at73c213.o
-+
-+obj-$(CONFIG_SND_AT73C213)	+= snd-at73c213.o
-diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c
-new file mode 100644
-index 0000000..f514f47
---- /dev/null
-+++ b/sound/spi/at73c213.c
-@@ -0,0 +1,1121 @@
-+/*
-+ * Driver for AT73C213 16-bit stereo DAC connected to Atmel SSC
-+ *
-+ * Copyright (C) 2006-2007 Atmel Norway
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published by
-+ * the Free Software Foundation.
-+ */
-+
-+/*#define DEBUG*/
-+
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+
-+#include <sound/driver.h>
-+#include <sound/initval.h>
-+#include <sound/control.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+
-+#include <linux/atmel-ssc.h>
-+
-+#include <linux/spi/spi.h>
-+#include <linux/spi/at73c213.h>
-+
-+#include "at73c213.h"
-+
-+#define BITRATE_MIN	 8000 /* Hardware limit? */
-+#define BITRATE_TARGET	CONFIG_SND_AT73C213_TARGET_BITRATE
-+#define BITRATE_MAX	50000 /* Hardware limit. */
-+
-+/* Initial (hardware reset) AT73C213 register values. */
-+static u8 snd_at73c213_original_image[18] =
-+{
-+	0x00,	/* 00 - CTRL    */
-+	0x05,	/* 01 - LLIG    */
-+	0x05,	/* 02 - RLIG    */
-+	0x08,	/* 03 - LPMG    */
-+	0x08,	/* 04 - RPMG    */
-+	0x00,	/* 05 - LLOG    */
-+	0x00,	/* 06 - RLOG    */
-+	0x22,	/* 07 - OLC     */
-+	0x09,	/* 08 - MC      */
-+	0x00,	/* 09 - CSFC    */
-+	0x00,	/* 0A - MISC    */
-+	0x00,	/* 0B -         */
-+	0x00,	/* 0C - PRECH   */
-+	0x05,	/* 0D - AUXG    */
-+	0x00,	/* 0E -         */
-+	0x00,	/* 0F -         */
-+	0x00,	/* 10 - RST     */
-+	0x00,	/* 11 - PA_CTRL */
-+};
-+
-+struct snd_at73c213 {
-+	struct snd_card			*card;
-+	struct snd_pcm			*pcm;
-+	struct snd_pcm_substream	*substream;
-+	struct at73c213_board_info	*board;
-+	int				irq;
-+	int				period;
-+	unsigned long			bitrate;
-+	struct clk			*bitclk;
-+	struct ssc_device		*ssc;
-+	struct spi_device		*spi;
-+	u8				spi_wbuffer[2];
-+	u8				spi_rbuffer[2];
-+	/* Image of the SPI registers in AT73C213. */
-+	u8				reg_image[18];
-+	/* Protect registers against concurrent access. */
-+	spinlock_t			lock;
-+};
-+
-+#define get_chip(card) ((struct snd_at73c213 *)card->private_data)
-+
-+static int
-+snd_at73c213_write_reg(struct snd_at73c213 *chip, u8 reg, u8 val)
-+{
-+	struct spi_message msg;
-+	struct spi_transfer msg_xfer = {
-+		.len		= 2,
-+		.cs_change	= 0,
-+	};
-+	int retval;
-+
-+	spi_message_init(&msg);
-+
-+	chip->spi_wbuffer[0] = reg;
-+	chip->spi_wbuffer[1] = val;
-+
-+	msg_xfer.tx_buf = chip->spi_wbuffer;
-+	msg_xfer.rx_buf = chip->spi_rbuffer;
-+	spi_message_add_tail(&msg_xfer, &msg);
-+
-+	retval = spi_sync(chip->spi, &msg);
-+
-+	if (!retval)
-+		chip->reg_image[reg] = val;
-+
-+	return retval;
-+}
-+
-+static struct snd_pcm_hardware snd_at73c213_playback_hw = {
-+	.info		= SNDRV_PCM_INFO_INTERLEAVED |
-+			  SNDRV_PCM_INFO_BLOCK_TRANSFER,
-+	.formats	= SNDRV_PCM_FMTBIT_S16_BE,
-+	.rates		= SNDRV_PCM_RATE_CONTINUOUS,
-+	.rate_min	= 8000,  /* Replaced by chip->bitrate later. */
-+	.rate_max	= 50000, /* Replaced by chip->bitrate later. */
-+	.channels_min	= 2,
-+	.channels_max	= 2,
-+	.buffer_bytes_max = 64 * 1024 - 1,
-+	.period_bytes_min = 512,
-+	.period_bytes_max = 64 * 1024 - 1,
-+	.periods_min	= 4,
-+	.periods_max	= 1024,
-+};
-+
-+/*
-+ * Calculate and set bitrate and divisions.
-+ */
-+static int snd_at73c213_set_bitrate(struct snd_at73c213 *chip)
-+{
-+	unsigned long ssc_rate = clk_get_rate(chip->ssc->clk);
-+	unsigned long dac_rate_new, ssc_div, status;
-+	unsigned long ssc_div_max, ssc_div_min;
-+	int max_tries;
-+
-+	/*
-+	 * We connect two clocks here, picking divisors so the I2S clocks
-+	 * out data at the same rate the DAC clocks it in ... and as close
-+	 * as practical to the desired target rate.
-+	 *
-+	 * The DAC master clock (MCLK) is programmable, and is either 256
-+	 * or (not here) 384 times the I2S output clock (BCLK).
-+	 */
-+
-+	/* SSC clock / (bitrate * stereo * 16-bit). */
-+	ssc_div = ssc_rate / (BITRATE_TARGET * 2 * 16);
-+	ssc_div_min = ssc_rate / (BITRATE_MAX * 2 * 16);
-+	ssc_div_max = ssc_rate / (BITRATE_MIN * 2 * 16);
-+	max_tries = (ssc_div_max - ssc_div_min) / 2;
-+
-+	if (max_tries < 1)
-+		max_tries = 1;
-+
-+	/* ssc_div must be a power of 2. */
-+	ssc_div = (ssc_div + 1) & ~1UL;
-+
-+	if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN) {
-+		ssc_div -= 2;
-+		if ((ssc_rate / (ssc_div * 2 * 16)) > BITRATE_MAX)
-+			return -ENXIO;
-+	}
-+
-+	/* Search for a possible bitrate. */
-+	do {
-+		/* SSC clock / (ssc divider * 16-bit * stereo). */
-+		if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN)
-+			return -ENXIO;
-+
-+		/* 256 / (2 * 16) = 8 */
-+		dac_rate_new = 8 * (ssc_rate / ssc_div);
-+
-+		status = clk_round_rate(chip->board->dac_clk, dac_rate_new);
-+		if (status < 0)
-+			return status;
-+
-+		/* Ignore difference smaller than 256 Hz. */
-+		if ((status/256) == (dac_rate_new/256))
-+			goto set_rate;
-+
-+		ssc_div += 2;
-+	} while (--max_tries);
-+
-+	/* Not able to find a valid bitrate. */
-+	return -ENXIO;
-+
-+set_rate:
-+	status = clk_set_rate(chip->board->dac_clk, status);
-+	if (status < 0)
-+		return status;
-+
-+	/* Set divider in SSC device. */
-+	ssc_writel(chip->ssc->regs, CMR, ssc_div/2);
-+
-+	/* SSC clock / (ssc divider * 16-bit * stereo). */
-+	chip->bitrate = ssc_rate / (ssc_div * 16 * 2);
-+
-+	dev_info(&chip->spi->dev,
-+			"at73c213: supported bitrate is %lu (%lu divider)\n",
-+			chip->bitrate, ssc_div);
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_pcm_open(struct snd_pcm_substream *substream)
-+{
-+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+
-+	snd_at73c213_playback_hw.rate_min = chip->bitrate;
-+	snd_at73c213_playback_hw.rate_max = chip->bitrate;
-+	runtime->hw = snd_at73c213_playback_hw;
-+	chip->substream = substream;
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_pcm_close(struct snd_pcm_substream *substream)
-+{
-+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+	chip->substream = NULL;
-+	return 0;
-+}
-+
-+static int snd_at73c213_pcm_hw_params(struct snd_pcm_substream *substream,
-+				 struct snd_pcm_hw_params *hw_params)
-+{
-+	return snd_pcm_lib_malloc_pages(substream,
-+					params_buffer_bytes(hw_params));
-+}
-+
-+static int snd_at73c213_pcm_hw_free(struct snd_pcm_substream *substream)
-+{
-+	return snd_pcm_lib_free_pages(substream);
-+}
-+
-+static int snd_at73c213_pcm_prepare(struct snd_pcm_substream *substream)
-+{
-+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+	int block_size;
-+
-+	block_size = frames_to_bytes(runtime, runtime->period_size);
-+
-+	chip->period = 0;
-+
-+	ssc_writel(chip->ssc->regs, PDC_TPR,
-+			(long)runtime->dma_addr);
-+	ssc_writel(chip->ssc->regs, PDC_TCR, runtime->period_size * 2);
-+	ssc_writel(chip->ssc->regs, PDC_TNPR,
-+			(long)runtime->dma_addr + block_size);
-+	ssc_writel(chip->ssc->regs, PDC_TNCR, runtime->period_size * 2);
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_pcm_trigger(struct snd_pcm_substream *substream,
-+				   int cmd)
-+{
-+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+	int retval = 0;
-+
-+	spin_lock(&chip->lock);
-+
-+	switch (cmd) {
-+	case SNDRV_PCM_TRIGGER_START:
-+		ssc_writel(chip->ssc->regs, IER, SSC_BIT(IER_ENDTX));
-+		ssc_writel(chip->ssc->regs, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTEN));
-+		break;
-+	case SNDRV_PCM_TRIGGER_STOP:
-+		ssc_writel(chip->ssc->regs, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTDIS));
-+		ssc_writel(chip->ssc->regs, IDR, SSC_BIT(IDR_ENDTX));
-+		break;
-+	default:
-+		dev_dbg(&chip->spi->dev, "spurious command %x\n", cmd);
-+		retval = -EINVAL;
-+		break;
-+	}
-+
-+	spin_unlock(&chip->lock);
-+
-+	return retval;
-+}
-+
-+static snd_pcm_uframes_t
-+snd_at73c213_pcm_pointer(struct snd_pcm_substream *substream)
-+{
-+	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+	snd_pcm_uframes_t pos;
-+	unsigned long bytes;
-+
-+	bytes = ssc_readl(chip->ssc->regs, PDC_TPR)
-+		- (unsigned long)runtime->dma_addr;
-+
-+	pos = bytes_to_frames(runtime, bytes);
-+	if (pos >= runtime->buffer_size)
-+		pos -= runtime->buffer_size;
-+
-+	return pos;
-+}
-+
-+static struct snd_pcm_ops at73c213_playback_ops = {
-+	.open		= snd_at73c213_pcm_open,
-+	.close		= snd_at73c213_pcm_close,
-+	.ioctl		= snd_pcm_lib_ioctl,
-+	.hw_params	= snd_at73c213_pcm_hw_params,
-+	.hw_free	= snd_at73c213_pcm_hw_free,
-+	.prepare	= snd_at73c213_pcm_prepare,
-+	.trigger	= snd_at73c213_pcm_trigger,
-+	.pointer	= snd_at73c213_pcm_pointer,
-+};
-+
-+static void snd_at73c213_pcm_free(struct snd_pcm *pcm)
-+{
-+	struct snd_at73c213 *chip = snd_pcm_chip(pcm);
-+	if (chip->pcm) {
-+		snd_pcm_lib_preallocate_free_for_all(chip->pcm);
-+		chip->pcm = NULL;
-+	}
-+}
-+
-+static int __devinit snd_at73c213_pcm_new(struct snd_at73c213 *chip, int device)
-+{
-+	struct snd_pcm *pcm;
-+	int retval;
-+
-+	retval = snd_pcm_new(chip->card, chip->card->shortname,
-+			device, 1, 0, &pcm);
-+	if (retval < 0)
-+		goto out;
-+
-+	pcm->private_data = chip;
-+	pcm->private_free = snd_at73c213_pcm_free;
-+	pcm->info_flags = SNDRV_PCM_INFO_BLOCK_TRANSFER;
-+	strcpy(pcm->name, "at73c213");
-+	chip->pcm = pcm;
-+
-+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &at73c213_playback_ops);
-+
-+	retval = snd_pcm_lib_preallocate_pages_for_all(chip->pcm,
-+			SNDRV_DMA_TYPE_DEV, &chip->ssc->pdev->dev,
-+			64 * 1024, 64 * 1024);
-+out:
-+	return retval;
-+}
-+
-+static irqreturn_t snd_at73c213_interrupt(int irq, void *dev_id)
-+{
-+	struct snd_at73c213 *chip = dev_id;
-+	struct snd_pcm_runtime *runtime = chip->substream->runtime;
-+	u32 status;
-+	int offset;
-+	int block_size;
-+	int next_period;
-+	int retval = IRQ_NONE;
-+
-+	spin_lock(&chip->lock);
-+
-+	block_size = frames_to_bytes(runtime, runtime->period_size);
-+	status = ssc_readl(chip->ssc->regs, IMR);
-+
-+	if (status & SSC_BIT(IMR_ENDTX)) {
-+		chip->period++;
-+		if (chip->period == runtime->periods)
-+			chip->period = 0;
-+		next_period = chip->period + 1;
-+		if (next_period == runtime->periods)
-+			next_period = 0;
-+
-+		offset = block_size * next_period;
-+
-+		ssc_writel(chip->ssc->regs, PDC_TNPR,
-+				(long)runtime->dma_addr + offset);
-+		ssc_writel(chip->ssc->regs, PDC_TNCR, runtime->period_size * 2);
-+		retval = IRQ_HANDLED;
-+	}
-+
-+	ssc_readl(chip->ssc->regs, IMR);
-+	spin_unlock(&chip->lock);
-+
-+	if (status & SSC_BIT(IMR_ENDTX))
-+		snd_pcm_period_elapsed(chip->substream);
-+
-+	return retval;
-+}
-+
-+/*
-+ * Mixer functions.
-+ */
-+static int snd_at73c213_mono_get(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+	int reg = kcontrol->private_value & 0xff;
-+	int shift = (kcontrol->private_value >> 8) & 0xff;
-+	int mask = (kcontrol->private_value >> 16) & 0xff;
-+	int invert = (kcontrol->private_value >> 24) & 0xff;
-+
-+	spin_lock_irq(&chip->lock);
-+
-+	ucontrol->value.integer.value[0] = (chip->reg_image[reg] >> shift) & mask;
-+
-+	if (invert)
-+		ucontrol->value.integer.value[0] =
-+			(mask - ucontrol->value.integer.value[0]);
-+
-+	spin_unlock_irq(&chip->lock);
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_mono_put(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+	int reg = kcontrol->private_value & 0xff;
-+	int shift = (kcontrol->private_value >> 8) & 0xff;
-+	int mask = (kcontrol->private_value >> 16) & 0xff;
-+	int invert = (kcontrol->private_value >> 24) & 0xff;
-+	int change, retval;
-+	unsigned short val;
-+
-+	val = (ucontrol->value.integer.value[0] & mask);
-+	if (invert)
-+		val = mask - val;
-+	val <<= shift;
-+
-+	spin_lock_irq(&chip->lock);
-+
-+	val = (chip->reg_image[reg] & ~(mask << shift)) | val;
-+	change = val != chip->reg_image[reg];
-+	retval = snd_at73c213_write_reg(chip, reg, val);
-+
-+	spin_unlock_irq(&chip->lock);
-+
-+	if (retval)
-+		return retval;
-+
-+	return change;
-+}
-+
-+static int snd_at73c213_stereo_info(struct snd_kcontrol *kcontrol,
-+				  struct snd_ctl_elem_info *uinfo)
-+{
-+	int mask = (kcontrol->private_value >> 24) & 0xff;
-+
-+	if (mask == 1)
-+		uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
-+	else
-+		uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+
-+	uinfo->count = 2;
-+	uinfo->value.integer.min = 0;
-+	uinfo->value.integer.max = mask;
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_stereo_get(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+	int left_reg = kcontrol->private_value & 0xff;
-+	int right_reg = (kcontrol->private_value >> 8) & 0xff;
-+	int shift_left = (kcontrol->private_value >> 16) & 0x07;
-+	int shift_right = (kcontrol->private_value >> 19) & 0x07;
-+	int mask = (kcontrol->private_value >> 24) & 0xff;
-+	int invert = (kcontrol->private_value >> 22) & 1;
-+
-+	spin_lock_irq(&chip->lock);
-+
-+	ucontrol->value.integer.value[0] =
-+		(chip->reg_image[left_reg] >> shift_left) & mask;
-+	ucontrol->value.integer.value[1] =
-+		(chip->reg_image[right_reg] >> shift_right) & mask;
-+
-+	if (invert) {
-+		ucontrol->value.integer.value[0] =
-+			(mask - ucontrol->value.integer.value[0]);
-+		ucontrol->value.integer.value[1] =
-+			(mask - ucontrol->value.integer.value[1]);
-+	}
-+
-+	spin_unlock_irq(&chip->lock);
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_stereo_put(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+	int left_reg = kcontrol->private_value & 0xff;
-+	int right_reg = (kcontrol->private_value >> 8) & 0xff;
-+	int shift_left = (kcontrol->private_value >> 16) & 0x07;
-+	int shift_right = (kcontrol->private_value >> 19) & 0x07;
-+	int mask = (kcontrol->private_value >> 24) & 0xff;
-+	int invert = (kcontrol->private_value >> 22) & 1;
-+	int change, retval;
-+	unsigned short val1, val2;
-+
-+	val1 = ucontrol->value.integer.value[0] & mask;
-+	val2 = ucontrol->value.integer.value[1] & mask;
-+	if (invert) {
-+		val1 = mask - val1;
-+		val2 = mask - val2;
-+	}
-+	val1 <<= shift_left;
-+	val2 <<= shift_right;
-+
-+	spin_lock_irq(&chip->lock);
-+
-+	val1 = (chip->reg_image[left_reg] & ~(mask << shift_left)) | val1;
-+	val2 = (chip->reg_image[right_reg] & ~(mask << shift_right)) | val2;
-+	change = val1 != chip->reg_image[left_reg]
-+		|| val2 != chip->reg_image[right_reg];
-+	retval = snd_at73c213_write_reg(chip, left_reg, val1);
-+	if (retval) {
-+		spin_unlock_irq(&chip->lock);
-+		goto out;
-+	}
-+	retval = snd_at73c213_write_reg(chip, right_reg, val2);
-+	if (retval) {
-+		spin_unlock_irq(&chip->lock);
-+		goto out;
-+	}
-+
-+	spin_unlock_irq(&chip->lock);
-+
-+	return change;
-+
-+out:
-+	return retval;
-+}
-+
-+static int snd_at73c213_mono_switch_info(struct snd_kcontrol *kcontrol,
-+				  struct snd_ctl_elem_info *uinfo)
-+{
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
-+	uinfo->count = 1;
-+	uinfo->value.integer.min = 0;
-+	uinfo->value.integer.max = 1;
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_mono_switch_get(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+	int reg = kcontrol->private_value & 0xff;
-+	int shift = (kcontrol->private_value >> 8) & 0xff;
-+	int invert = (kcontrol->private_value >> 24) & 0xff;
-+
-+	spin_lock_irq(&chip->lock);
-+
-+	ucontrol->value.integer.value[0] = (chip->reg_image[reg] >> shift) & 0x01;
-+
-+	if (invert)
-+		ucontrol->value.integer.value[0] =
-+			(0x01 - ucontrol->value.integer.value[0]);
-+
-+	spin_unlock_irq(&chip->lock);
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_mono_switch_put(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+	int reg = kcontrol->private_value & 0xff;
-+	int shift = (kcontrol->private_value >> 8) & 0xff;
-+	int mask = (kcontrol->private_value >> 16) & 0xff;
-+	int invert = (kcontrol->private_value >> 24) & 0xff;
-+	int change, retval;
-+	unsigned short val;
-+
-+	if (ucontrol->value.integer.value[0])
-+		val = mask;
-+	else
-+		val = 0;
-+
-+	if (invert)
-+		val = mask - val;
-+	val <<= shift;
-+
-+	spin_lock_irq(&chip->lock);
-+
-+	val |= (chip->reg_image[reg] & ~(mask << shift));
-+	change = val != chip->reg_image[reg];
-+
-+	retval = snd_at73c213_write_reg(chip, reg, val);
-+
-+	spin_unlock_irq(&chip->lock);
-+
-+	if (retval)
-+		return retval;
-+
-+	return change;
-+}
-+
-+static int snd_at73c213_pa_volume_info(struct snd_kcontrol *kcontrol,
-+				  struct snd_ctl_elem_info *uinfo)
-+{
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+	uinfo->count = 1;
-+	uinfo->value.integer.min = 0;
-+	uinfo->value.integer.max = ((kcontrol->private_value >> 16) & 0xff) - 1;
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_line_capture_volume_info(
-+		struct snd_kcontrol *kcontrol,
-+		struct snd_ctl_elem_info *uinfo)
-+{
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+	uinfo->count = 2;
-+	/* When inverted will give values 0x10001 => 0. */
-+	uinfo->value.integer.min = 14;
-+	uinfo->value.integer.max = 31;
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_aux_capture_volume_info(
-+		struct snd_kcontrol *kcontrol,
-+		struct snd_ctl_elem_info *uinfo)
-+{
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+	uinfo->count = 1;
-+	/* When inverted will give values 0x10001 => 0. */
-+	uinfo->value.integer.min = 14;
-+	uinfo->value.integer.max = 31;
-+
-+	return 0;
-+}
-+
-+#define AT73C213_MONO_SWITCH(xname, xindex, reg, shift, mask, invert)	\
-+{									\
-+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,				\
-+	.name = xname,							\
-+	.index = xindex,						\
-+	.info = snd_at73c213_mono_switch_info,				\
-+	.get = snd_at73c213_mono_switch_get,				\
-+	.put = snd_at73c213_mono_switch_put,				\
-+	.private_value = (reg | (shift << 8) | (mask << 16) | (invert << 24)) \
-+}
-+
-+#define AT73C213_STEREO(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \
-+{									\
-+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,				\
-+	.name = xname,							\
-+	.index = xindex,						\
-+	.info = snd_at73c213_stereo_info,				\
-+	.get = snd_at73c213_stereo_get,					\
-+	.put = snd_at73c213_stereo_put,					\
-+	.private_value = (left_reg | (right_reg << 8)			\
-+			| (shift_left << 16) | (shift_right << 19)	\
-+			| (mask << 24) | (invert << 22))		\
-+}
-+
-+static struct snd_kcontrol_new snd_at73c213_controls[] __devinitdata = {
-+AT73C213_STEREO("Master Playback Volume", 0, DAC_LMPG, DAC_RMPG, 0, 0, 0x1f, 1),
-+AT73C213_STEREO("Master Playback Switch", 0, DAC_LMPG, DAC_RMPG, 5, 5, 1, 1),
-+AT73C213_STEREO("PCM Playback Volume", 0, DAC_LLOG, DAC_RLOG, 0, 0, 0x1f, 1),
-+AT73C213_STEREO("PCM Playback Switch", 0, DAC_LLOG, DAC_RLOG, 5, 5, 1, 1),
-+AT73C213_MONO_SWITCH("Mono PA Playback Switch", 0, DAC_CTRL, DAC_CTRL_ONPADRV, 0x01, 0),
-+{
-+	.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
-+	.name	= "PA Playback Volume",
-+	.index	= 0,
-+	.info	= snd_at73c213_pa_volume_info,
-+	.get	= snd_at73c213_mono_get,
-+	.put	= snd_at73c213_mono_put,
-+	.private_value	= PA_CTRL | (PA_CTRL_APAGAIN << 8) | (0x0f << 16) | (1 << 24),
-+},
-+AT73C213_MONO_SWITCH("PA High Gain Playback Switch", 0, PA_CTRL, PA_CTRL_APALP, 0x01, 1),
-+AT73C213_MONO_SWITCH("PA Playback Switch", 0, PA_CTRL, PA_CTRL_APAON, 0x01, 0),
-+{
-+	.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
-+	.name	= "Aux Capture Volume",
-+	.index	= 0,
-+	.info	= snd_at73c213_aux_capture_volume_info,
-+	.get	= snd_at73c213_mono_get,
-+	.put	= snd_at73c213_mono_put,
-+	.private_value	= DAC_AUXG | (0 << 8) | (0x1f << 16) | (1 << 24),
-+},
-+AT73C213_MONO_SWITCH("Aux Capture Switch", 0, DAC_CTRL, DAC_CTRL_ONAUXIN, 0x01, 0),
-+{
-+	.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
-+	.name	= "Line Capture Volume",
-+	.index	= 0,
-+	.info	= snd_at73c213_line_capture_volume_info,
-+	.get	= snd_at73c213_stereo_get,
-+	.put	= snd_at73c213_stereo_put,
-+	.private_value	= DAC_LLIG | (DAC_RLIG << 8) | (0 << 16) | (0 << 19)
-+		| (0x1f << 24) | (1 << 22),
-+},
-+AT73C213_MONO_SWITCH("Line Capture Switch", 0, DAC_CTRL, 0, 0x03, 0),
-+};
-+
-+static int __devinit snd_at73c213_mixer(struct snd_at73c213 *chip)
-+{
-+	struct snd_card *card;
-+	int errval, idx;
-+
-+	if (chip == NULL || chip->pcm == NULL)
-+		return -EINVAL;
-+
-+	card = chip->card;
-+
-+	strcpy(card->mixername, chip->pcm->name);
-+
-+	for (idx = 0; idx < ARRAY_SIZE(snd_at73c213_controls); idx++) {
-+		errval = snd_ctl_add(card,
-+				snd_ctl_new1(&snd_at73c213_controls[idx],
-+					chip));
-+		if (errval < 0)
-+			goto cleanup;
-+	}
-+
-+	return 0;
-+
-+cleanup:
-+	for (idx = 1; idx < ARRAY_SIZE(snd_at73c213_controls) + 1; idx++) {
-+		struct snd_kcontrol *kctl;
-+		kctl = snd_ctl_find_numid(card, idx);
-+		if (kctl)
-+			snd_ctl_remove(card, kctl);
-+	}
-+	return errval;
-+}
-+
-+/*
-+ * Device functions
-+ */
-+static int snd_at73c213_ssc_init(struct snd_at73c213 *chip)
-+{
-+	/*
-+	 * Continuous clock output.
-+	 * Starts on falling TF.
-+	 * Delay 1 cycle (1 bit).
-+	 * Periode is 16 bit (16 - 1).
-+	 */
-+	ssc_writel(chip->ssc->regs, TCMR,
-+			SSC_BF(TCMR_CKO, 1)
-+			| SSC_BF(TCMR_START, 4)
-+			| SSC_BF(TCMR_STTDLY, 1)
-+			| SSC_BF(TCMR_PERIOD, 16 - 1));
-+	/*
-+	 * Data length is 16 bit (16 - 1).
-+	 * Transmit MSB first.
-+	 * Transmit 2 words each transfer.
-+	 * Frame sync length is 16 bit (16 - 1).
-+	 * Frame starts on negative pulse.
-+	 */
-+	ssc_writel(chip->ssc->regs, TFMR,
-+			SSC_BF(TFMR_DATLEN, 16 - 1)
-+			| SSC_BIT(TFMR_MSBF)
-+			| SSC_BF(TFMR_DATNB, 1)
-+			| SSC_BF(TFMR_FSLEN, 16 - 1)
-+			| SSC_BF(TFMR_FSOS, 1));
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_chip_init(struct snd_at73c213 *chip)
-+{
-+	int retval;
-+	unsigned char dac_ctrl = 0;
-+
-+	retval = snd_at73c213_set_bitrate(chip);
-+	if (retval)
-+		goto out;
-+
-+	/* Enable DAC master clock. */
-+	clk_enable(chip->board->dac_clk);
-+
-+	/* Initialize at73c213 on SPI bus. */
-+	retval = snd_at73c213_write_reg(chip, DAC_RST, 0x04);
-+	if (retval)
-+		goto out_clk;
-+	msleep(1);
-+	retval = snd_at73c213_write_reg(chip, DAC_RST, 0x03);
-+	if (retval)
-+		goto out_clk;
-+
-+	/* Precharge everything. */
-+	retval = snd_at73c213_write_reg(chip, DAC_PRECH, 0xff);
-+	if (retval)
-+		goto out_clk;
-+	retval = snd_at73c213_write_reg(chip, PA_CTRL, (1<<PA_CTRL_APAPRECH));
-+	if (retval)
-+		goto out_clk;
-+	retval = snd_at73c213_write_reg(chip, DAC_CTRL,
-+			(1<<DAC_CTRL_ONLNOL) | (1<<DAC_CTRL_ONLNOR));
-+	if (retval)
-+		goto out_clk;
-+
-+	msleep(50);
-+
-+	/* Stop precharging PA. */
-+	retval = snd_at73c213_write_reg(chip, PA_CTRL,
-+			(1<<PA_CTRL_APALP) | 0x0f);
-+	if (retval)
-+		goto out_clk;
-+
-+	msleep(450);
-+
-+	/* Stop precharging DAC, turn on master power. */
-+	retval = snd_at73c213_write_reg(chip, DAC_PRECH, (1<<DAC_PRECH_ONMSTR));
-+	if (retval)
-+		goto out_clk;
-+
-+	msleep(1);
-+
-+	/* Turn on DAC. */
-+	dac_ctrl = (1<<DAC_CTRL_ONDACL) | (1<<DAC_CTRL_ONDACR)
-+		| (1<<DAC_CTRL_ONLNOL) | (1<<DAC_CTRL_ONLNOR);
-+
-+	retval = snd_at73c213_write_reg(chip, DAC_CTRL, dac_ctrl);
-+	if (retval)
-+		goto out_clk;
-+
-+	/* Mute sound. */
-+	retval = snd_at73c213_write_reg(chip, DAC_LMPG, 0x3f);
-+	if (retval)
-+		goto out_clk;
-+	retval = snd_at73c213_write_reg(chip, DAC_RMPG, 0x3f);
-+	if (retval)
-+		goto out_clk;
-+	retval = snd_at73c213_write_reg(chip, DAC_LLOG, 0x3f);
-+	if (retval)
-+		goto out_clk;
-+	retval = snd_at73c213_write_reg(chip, DAC_RLOG, 0x3f);
-+	if (retval)
-+		goto out_clk;
-+	retval = snd_at73c213_write_reg(chip, DAC_LLIG, 0x11);
-+	if (retval)
-+		goto out_clk;
-+	retval = snd_at73c213_write_reg(chip, DAC_RLIG, 0x11);
-+	if (retval)
-+		goto out_clk;
-+	retval = snd_at73c213_write_reg(chip, DAC_AUXG, 0x11);
-+	if (retval)
-+		goto out_clk;
-+
-+	/* Enable I2S device, i.e. clock output. */
-+	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN));
-+
-+	goto out;
-+
-+out_clk:
-+	clk_disable(chip->board->dac_clk);
-+out:
-+	return retval;
-+}
-+
-+static int snd_at73c213_dev_free(struct snd_device *device)
-+{
-+	struct snd_at73c213 *chip = device->device_data;
-+
-+	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
-+	if (chip->irq >= 0) {
-+		free_irq(chip->irq, chip);
-+		chip->irq = -1;
-+	}
-+
-+	return 0;
-+}
-+
-+static int __devinit snd_at73c213_dev_init(struct snd_card *card,
-+					 struct spi_device *spi)
-+{
-+	static struct snd_device_ops ops = {
-+		.dev_free	= snd_at73c213_dev_free,
-+	};
-+	struct snd_at73c213 *chip = get_chip(card);
-+	int irq, retval;
-+
-+	irq = chip->ssc->irq;
-+	if (irq < 0)
-+		return irq;
-+
-+	spin_lock_init(&chip->lock);
-+	chip->card = card;
-+	chip->irq = -1;
-+
-+	retval = request_irq(irq, snd_at73c213_interrupt, 0, "at73c213", chip);
-+	if (retval) {
-+		dev_dbg(&chip->spi->dev, "unable to request irq %d\n", irq);
-+		goto out;
-+	}
-+	chip->irq = irq;
-+
-+	memcpy(&chip->reg_image, &snd_at73c213_original_image,
-+			sizeof(snd_at73c213_original_image));
-+
-+	retval = snd_at73c213_ssc_init(chip);
-+	if (retval)
-+		goto out_irq;
-+
-+	retval = snd_at73c213_chip_init(chip);
-+	if (retval)
-+		goto out_irq;
-+
-+	retval = snd_at73c213_pcm_new(chip, 0);
-+	if (retval)
-+		goto out_irq;
-+
-+	retval = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
-+	if (retval)
-+		goto out_irq;
-+
-+	retval = snd_at73c213_mixer(chip);
-+	if (retval)
-+		goto out_snd_dev;
-+
-+	snd_card_set_dev(card, &spi->dev);
-+
-+	goto out;
-+
-+out_snd_dev:
-+	snd_device_free(card, chip);
-+out_irq:
-+	free_irq(chip->irq, chip);
-+	chip->irq = -1;
-+out:
-+	return retval;
-+}
-+
-+static int snd_at73c213_probe(struct spi_device *spi)
-+{
-+	struct snd_card			*card;
-+	struct snd_at73c213		*chip;
-+	struct at73c213_board_info	*board;
-+	int				retval;
-+	char				id[16];
-+
-+	board = spi->dev.platform_data;
-+	if (!board) {
-+		dev_dbg(&spi->dev, "no platform_data\n");
++	if (!request_mem_region(res->start, PCA_IO_SIZE, "PCA9564"))
 +		return -ENXIO;
++
++	base_addr = ioremap(res->start, PCA_IO_SIZE);
++	if (base_addr == NULL)
++		goto out_region;
++
++	irq = platform_get_irq(pdev, 0);
++	if (irq > -1) {
++		if (request_irq(irq, pca_handler, 0, "pca9564", NULL) < 0) {
++			printk(KERN_ERR "i2c-pca: Request irq%d failed\n", irq);
++			goto out_remap;
++		}
 +	}
 +
-+	if (!board->dac_clk) {
-+		dev_dbg(&spi->dev, "no DAC clk\n");
-+		return -ENXIO;
++	/* set up the driverfs linkage to our parent device */
++	pca_i2c_ops.dev.parent = &pdev->dev;
++
++	if (i2c_pca_add_bus(&pca_i2c_ops) < 0) {
++		printk(KERN_ERR "i2c-pca: Failed to add i2c bus\n");
++		goto out_irq;
 +	}
 +
-+	if (IS_ERR(board->dac_clk)) {
-+		dev_dbg(&spi->dev, "no DAC clk\n");
-+		return PTR_ERR(board->dac_clk);
-+	}
++	return 0;
 +
-+	retval = -ENOMEM;
++ out_irq:
++	if (irq > -1)
++		free_irq(irq, &pca_i2c_ops);
 +
-+	/* Allocate "card" using some unused identifiers. */
-+	snprintf(id, sizeof id, "at73c213_%d", board->ssc_id);
-+	card = snd_card_new(-1, id, THIS_MODULE, sizeof(struct snd_at73c213));
-+	if (!card)
-+		goto out;
++ out_remap:
++	iounmap(base_addr);
 +
-+	chip = card->private_data;
-+	chip->spi = spi;
-+	chip->board = board;
-+
-+	chip->ssc = ssc_request(board->ssc_id);
-+	if (IS_ERR(chip->ssc)) {
-+		dev_dbg(&spi->dev, "could not get ssc%d device\n",
-+				board->ssc_id);
-+		retval = PTR_ERR(chip->ssc);
-+		goto out_card;
-+	}
-+
-+	retval = snd_at73c213_dev_init(card, spi);
-+	if (retval)
-+		goto out_ssc;
-+
-+	strcpy(card->driver, "at73c213");
-+	strcpy(card->shortname, board->shortname);
-+	sprintf(card->longname, "%s on irq %d", card->shortname, chip->irq);
-+
-+	retval = snd_card_register(card);
-+	if (retval)
-+		goto out_ssc;
-+
-+	dev_set_drvdata(&spi->dev, card);
-+
-+	goto out;
-+
-+out_ssc:
-+	ssc_free(chip->ssc);
-+out_card:
-+	snd_card_free(card);
-+out:
-+	return retval;
++ out_region:
++	release_mem_region(res->start, PCA_IO_SIZE);
++	return -ENODEV;
 +}
 +
-+static int __devexit snd_at73c213_remove(struct spi_device *spi)
++static int __devexit pca_i2c_remove(struct platform_device *pdev)
 +{
-+	struct snd_card *card = dev_get_drvdata(&spi->dev);
-+	struct snd_at73c213 *chip = card->private_data;
-+	int retval;
++	struct resource *res;
 +
-+	/* Stop playback. */
-+	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
++	i2c_del_adapter(&pca_i2c_ops);
 +
-+	/* Mute sound. */
-+	retval = snd_at73c213_write_reg(chip, DAC_LMPG, 0x3f);
-+	if (retval)
-+		goto out;
-+	retval = snd_at73c213_write_reg(chip, DAC_RMPG, 0x3f);
-+	if (retval)
-+		goto out;
-+	retval = snd_at73c213_write_reg(chip, DAC_LLOG, 0x3f);
-+	if (retval)
-+		goto out;
-+	retval = snd_at73c213_write_reg(chip, DAC_RLOG, 0x3f);
-+	if (retval)
-+		goto out;
-+	retval = snd_at73c213_write_reg(chip, DAC_LLIG, 0x11);
-+	if (retval)
-+		goto out;
-+	retval = snd_at73c213_write_reg(chip, DAC_RLIG, 0x11);
-+	if (retval)
-+		goto out;
-+	retval = snd_at73c213_write_reg(chip, DAC_AUXG, 0x11);
-+	if (retval)
-+		goto out;
++	if (irq > 0)
++		free_irq(irq, NULL);
 +
-+	/* Turn off PA. */
-+	retval = snd_at73c213_write_reg(chip, PA_CTRL, (chip->reg_image[PA_CTRL]|0x0f));
-+	if (retval)
-+		goto out;
-+	msleep(10);
-+	retval = snd_at73c213_write_reg(chip, PA_CTRL, (1<<PA_CTRL_APALP)|0x0f);
-+	if (retval)
-+		goto out;
++	iounmap(base_addr);
 +
-+	/* Turn off external DAC. */
-+	retval = snd_at73c213_write_reg(chip, DAC_CTRL, 0x0c);
-+	if (retval)
-+		goto out;
-+	msleep(2);
-+	retval = snd_at73c213_write_reg(chip, DAC_CTRL, 0x00);
-+	if (retval)
-+		goto out;
-+
-+	/* Turn off master power. */
-+	retval = snd_at73c213_write_reg(chip, DAC_PRECH, 0x00);
-+	if (retval)
-+		goto out;
-+
-+out:
-+	/* Stop DAC master clock. */
-+	clk_disable(chip->board->dac_clk);
-+
-+	ssc_free(chip->ssc);
-+	snd_card_free(card);
-+	dev_set_drvdata(&spi->dev, NULL);
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	release_mem_region(res->start, PCA_IO_SIZE);
 +
 +	return 0;
 +}
 +
-+#ifdef CONFIG_PM
-+static int snd_at73c213_suspend(struct spi_device *spi, pm_message_t msg)
-+{
-+	struct snd_card *card = dev_get_drvdata(&spi->dev);
-+	struct snd_at73c213 *chip = card->private_data;
-+
-+	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
-+	clk_disable(chip->board->dac_clk);
-+
-+	return 0;
-+}
-+
-+static int snd_at73c213_resume(struct spi_device *spi)
-+{
-+	struct snd_card *card = dev_get_drvdata(&spi->dev);
-+	struct snd_at73c213 *chip = card->private_data;
-+
-+	clk_enable(chip->board->dac_clk);
-+	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN));
-+
-+	return 0;
-+}
-+#else
-+#define snd_at73c213_suspend NULL
-+#define snd_at73c213_resume NULL
-+#endif
-+
-+static struct spi_driver at73c213_driver = {
++static struct platform_driver pca_i2c_driver = {
++	.probe		= pca_i2c_probe,
++	.remove		= __devexit_p(pca_i2c_remove),
 +	.driver		= {
-+		.name	= "at73c213",
++		.name	= "pca9564",
++		.owner	= THIS_MODULE,
 +	},
-+	.probe		= snd_at73c213_probe,
-+	.suspend	= snd_at73c213_suspend,
-+	.resume		= snd_at73c213_resume,
-+	.remove		= __devexit_p(snd_at73c213_remove),
 +};
 +
-+static int __init at73c213_init(void)
++static int __init pca_i2c_init(void)
 +{
-+	return spi_register_driver(&at73c213_driver);
++	return platform_driver_register(&pca_i2c_driver);
 +}
-+module_init(at73c213_init);
 +
-+static void __exit at73c213_exit(void)
++static void __exit pca_i2c_exit(void)
 +{
-+	spi_unregister_driver(&at73c213_driver);
++	platform_driver_unregister(&pca_i2c_driver);
 +}
-+module_exit(at73c213_exit);
 +
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("Sound driver for AT73C213 with Atmel SSC");
++module_init(pca_i2c_init);
++module_exit(pca_i2c_exit);
++
++MODULE_AUTHOR("Andrew Victor");
++MODULE_DESCRIPTION("PCA9564 platform driver");
 +MODULE_LICENSE("GPL");
-diff --git a/sound/spi/at73c213.h b/sound/spi/at73c213.h
-new file mode 100644
-index 0000000..fd8b372
---- /dev/null
-+++ b/sound/spi/at73c213.h
-@@ -0,0 +1,119 @@
-+/*
-+ * Driver for the AT73C213 16-bit stereo DAC on Atmel ATSTK1000
-+ *
-+ * Copyright (C) 2006 - 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+ * 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this
-+ * distribution in the file called COPYING.
-+ */
-+
-+#ifndef _SND_AT73C213_H
-+#define _SND_AT73C213_H
-+
-+/* DAC control register */
-+#define DAC_CTRL		0x00
-+#define DAC_CTRL_ONPADRV	7
-+#define DAC_CTRL_ONAUXIN	6
-+#define DAC_CTRL_ONDACR		5
-+#define DAC_CTRL_ONDACL		4
-+#define DAC_CTRL_ONLNOR		3
-+#define DAC_CTRL_ONLNOL		2
-+#define DAC_CTRL_ONLNIR		1
-+#define DAC_CTRL_ONLNIL		0
-+
-+/* DAC left line in gain register */
-+#define DAC_LLIG		0x01
-+#define DAC_LLIG_LLIG		0
-+
-+/* DAC right line in gain register */
-+#define DAC_RLIG		0x02
-+#define DAC_RLIG_RLIG		0
-+
-+/* DAC Left Master Playback Gain Register */
-+#define DAC_LMPG		0x03
-+#define DAC_LMPG_LMPG		0
-+
-+/* DAC Right Master Playback Gain Register */
-+#define DAC_RMPG		0x04
-+#define DAC_RMPG_RMPG		0
-+
-+/* DAC Left Line Out Gain Register */
-+#define DAC_LLOG		0x05
-+#define DAC_LLOG_LLOG		0
-+
-+/* DAC Right Line Out Gain Register */
-+#define DAC_RLOG		0x06
-+#define DAC_RLOG_RLOG		0
-+
-+/* DAC Output Level Control Register */
-+#define DAC_OLC			0x07
-+#define DAC_OLC_RSHORT		7
-+#define DAC_OLC_ROLC		4
-+#define DAC_OLC_LSHORT		3
-+#define DAC_OLC_LOLC		0
-+
-+/* DAC Mixer Control Register */
-+#define DAC_MC			0x08
-+#define DAC_MC_INVR		5
-+#define DAC_MC_INVL		4
-+#define DAC_MC_RMSMIN2		3
-+#define DAC_MC_RMSMIN1		2
-+#define DAC_MC_LMSMIN2		1
-+#define DAC_MC_LMSMIN1		0
-+
-+/* DAC Clock and Sampling Frequency Control Register */
-+#define DAC_CSFC		0x09
-+#define DAC_CSFC_OVRSEL		4
-+
-+/* DAC Miscellaneous Register */
-+#define DAC_MISC		0x0A
-+#define DAC_MISC_VCMCAPSEL	7
-+#define DAC_MISC_DINTSEL	4
-+#define DAC_MISC_DITHEN		3
-+#define DAC_MISC_DEEMPEN	2
-+#define DAC_MISC_NBITS		0
-+
-+/* DAC Precharge Control Register */
-+#define DAC_PRECH		0x0C
-+#define DAC_PRECH_PRCHGPDRV	7
-+#define DAC_PRECH_PRCHGAUX1	6
-+#define DAC_PRECH_PRCHGLNOR	5
-+#define DAC_PRECH_PRCHGLNOL	4
-+#define DAC_PRECH_PRCHGLNIR	3
-+#define DAC_PRECH_PRCHGLNIL	2
-+#define DAC_PRECH_PRCHG		1
-+#define DAC_PRECH_ONMSTR	0
-+
-+/* DAC Auxiliary Input Gain Control Register */
-+#define DAC_AUXG		0x0D
-+#define DAC_AUXG_AUXG		0
-+
-+/* DAC Reset Register */
-+#define DAC_RST			0x10
-+#define DAC_RST_RESMASK		2
-+#define DAC_RST_RESFILZ		1
-+#define DAC_RST_RSTZ		0
-+
-+/* Power Amplifier Control Register */
-+#define PA_CTRL			0x11
-+#define PA_CTRL_APAON		6
-+#define PA_CTRL_APAPRECH	5
-+#define PA_CTRL_APALP		4
-+#define PA_CTRL_APAGAIN		0
-+
-+#endif /* _SND_AT73C213_H */
+Index: linux-2.6.22.1/drivers/i2c/busses/i2c-at91.c
+===================================================================
+--- linux-2.6.22.1/drivers/i2c/busses/i2c-at91.c	(revision 1)
++++ linux-2.6.22.1/drivers/i2c/busses/i2c-at91.c	(arbetskopia)
+@@ -31,8 +31,11 @@
+ #include <asm/arch/board.h>
+ #include <asm/arch/cpu.h>
+ 
+-#define TWI_CLOCK		100000		/* Hz. max 400 Kbits/sec */
+ 
++/* Clockrate is configurable - max 400 Kbits/sec */
++static unsigned int clockrate = CONFIG_I2C_AT91_CLOCKRATE;
++module_param(clockrate, uint, 0);
++MODULE_PARM_DESC(clockrate, "The TWI clockrate");
+ 
+ static struct clk *twi_clk;
+ static void __iomem *twi_base;
+@@ -53,7 +56,7 @@
+ 	at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN);	/* Set Master mode */
+ 
+ 	/* Calcuate clock dividers */
+-	cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3;
++	cdiv = (clk_get_rate(twi_clk) / (2 * clockrate)) - 3;
+ 	cdiv = cdiv + 1;	/* round up */
+ 	ckdiv = 0;
+ 	while (cdiv > 255) {
+@@ -61,11 +64,12 @@
+ 		cdiv = cdiv >> 1;
+ 	}
+ 
+-	if (cpu_is_at91rm9200()) {			/* AT91RM9200 Errata #22 */
+-		if (ckdiv > 5) {
+-			printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n");
+-			ckdiv = 5;
+-		}
++	if (cpu_is_at91rm9200() && (ckdiv > 5)) {	/* AT91RM9200 Errata #22 */
++		printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
++		ckdiv = 5;
++	} else if (ckdiv > 7) {
++		printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
++		ckdiv = 7;
+ 	}
+ 
+ 	at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv);
diff --git a/target/device/Atmel/linux/kernel-patches-2.6.22.1/linux-2.6.22.1-005-atags-support.patch b/target/device/Atmel/linux/kernel-patches-2.6.22.1/linux-2.6.22.1-005-atags-support.patch
new file mode 100644
index 000000000..0068ef17c
--- /dev/null
+++ b/target/device/Atmel/linux/kernel-patches-2.6.22.1/linux-2.6.22.1-005-atags-support.patch
@@ -0,0 +1,122 @@
+--- linux-2.6.22/arch/arm/kernel/head-common.S	2007-05-16 10:13:04.000000000 -0500
++++ linux-2.6.22-bgat/arch/arm/kernel/head-common.S	2007-05-30 21:54:45.000000000 -0500
+@@ -20,7 +20,8 @@
+ 	.long	_end				@ r7
+ 	.long	processor_id			@ r4
+ 	.long	__machine_arch_type		@ r5
+-	.long	cr_alignment			@ r6
++	.long	__atags_pointer			@ r6
++	.long	cr_alignment			@ r7
+ 	.long	init_thread_union + THREAD_START_SP @ sp
+ 
+ /*
+@@ -29,6 +30,7 @@
+  *
+  *  r0  = cp#15 control register
+  *  r1  = machine ID
++ *  r2  = atags pointer
+  *  r9  = processor ID
+  */
+ 	.type	__mmap_switched, %function
+@@ -47,11 +49,12 @@
+ 	strcc	fp, [r6],#4
+ 	bcc	1b
+ 
+-	ldmia	r3, {r4, r5, r6, sp}
++	ldmia	r3, {r4, r5, r6, r7, sp}
+ 	str	r9, [r4]			@ Save processor ID
+ 	str	r1, [r5]			@ Save machine type
++	str	r2, [r6]			@ Save atags pointer
+ 	bic	r4, r0, #CR_A			@ Clear 'A' bit
+-	stmia	r6, {r0, r4}			@ Save control register values
++	stmia	r7, {r0, r4}			@ Save control register values
+ 	b	start_kernel
+ 
+ /*
+@@ -215,3 +218,34 @@
+ 	bl	__lookup_machine_type
+ 	mov	r0, r5
+ 	ldmfd	sp!, {r4 - r6, pc}
++
++/* Determine validity of the r2 atags pointer.  The heuristic requires
++ * that the pointer be aligned, in the first 16k of physical RAM and
++ * that the ATAG_CORE marker is first and present.  Future revisions
++ * of this function may be more lenient with the physical address and
++ * may also be able to move the ATAGS block if necessary.
++ *
++ * r8  = machinfo
++ *
++ * Returns:
++ *  r2 either valid atags pointer, or zero
++ *  r5, r6 corrupted
++ */
++
++	.type	__vet_atags, %function
++__vet_atags:
++	tst	r2, #0x3			@ aligned?
++	bne	1f
++
++	ldr	r5, [r2, #0]			@ is first tag ATAG_CORE?
++	subs	r5, r5, #ATAG_CORE_SIZE
++	bne	1f
++	ldr	r5, [r2, #4]
++	ldr	r6, =ATAG_CORE
++	cmp	r5, r6
++	bne	1f
++
++	mov	pc, lr				@ atag pointer is ok
++
++1:	mov	r2, #0
++	mov	pc, lr
+--- linux-2.6.22/arch/arm/kernel/head.S	2007-05-30 08:29:34.000000000 -0500
++++ linux-2.6.22-bgat/arch/arm/kernel/head.S	2007-05-30 22:05:53.000000000 -0500
+@@ -29,6 +29,10 @@
+ #define KERNEL_RAM_VADDR	(PAGE_OFFSET + TEXT_OFFSET)
+ #define KERNEL_RAM_PADDR	(PHYS_OFFSET + TEXT_OFFSET)
+ 
++#define ATAG_CORE 0x54410001
++#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
++
++
+ /*
+  * swapper_pg_dir is the virtual address of the initial page table.
+  * We place the page tables 16K below KERNEL_RAM_VADDR.  Therefore, we must
+@@ -61,7 +65,7 @@
+  *
+  * This is normally called from the decompressor code.  The requirements
+  * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
+- * r1 = machine nr.
++ * r1 = machine nr, r2 = atags pointer.
+  *
+  * This code is mostly position independent, so if you link the kernel at
+  * 0xc0008000, you call this at __pa(0xc0008000).
+@@ -85,6 +89,7 @@
+ 	bl	__lookup_machine_type		@ r5=machinfo
+ 	movs	r8, r5				@ invalid machine (r5=0)?
+ 	beq	__error_a			@ yes, error 'a'
++	bl	__vet_atags
+ 	bl	__create_page_tables
+ 
+ 	/*
+--- linux-2.6.22/arch/arm/kernel/setup.c	2007-05-30 08:29:34.000000000 -0500
++++ linux-2.6.22-bgat/arch/arm/kernel/setup.c	2007-05-30 22:07:08.000000000 -0500
+@@ -63,6 +63,8 @@
+ unsigned int __machine_arch_type;
+ EXPORT_SYMBOL(__machine_arch_type);
+ 
++unsigned int __atags_pointer __initdata;
++
+ unsigned int system_rev;
+ EXPORT_SYMBOL(system_rev);
+ 
+@@ -780,7 +782,9 @@
+ 	if (mdesc->soft_reboot)
+ 		reboot_setup("s");
+ 
+-	if (mdesc->boot_params)
++	if (__atags_pointer)
++		tags = phys_to_virt(__atags_pointer);
++	else if (mdesc->boot_params)
+ 		tags = phys_to_virt(mdesc->boot_params);
+ 
+ 	/*