genode/repos/base-hw/doc/x86_64_muen.txt
2016-01-08 14:37:57 +01:00

159 lines
6.1 KiB
Plaintext

=============================================
Getting started with 'base-hw' on the Muen SK
=============================================
The Muen Team
Abstract
########
This is a short tutorial that depicts a handy way to get a Genode image, built
with 'base-hw', started as subject on the Muen Separation Kernel (SK)
[http://muen.sk]. For general information about how to build Genode images with
'base-hw', have a look at '<genode_dir>/repos/base-hw/doc/hw.txt'.
Tutorial
########
For information on how to download, build and prove the Muen SK refer to the
project website. In summary: install the Ada/SPARK tool-chain and all required
distribution packages. Also ensure that you have installed the Genode tool-chain
that is available at:
:[http://genode.org/download/tool-chain]:
Genode tool-chain
To automatically download the Muen kernel and integrate it with Genode, issue
the following commands:
! cd <genode_dir>
! tool/ports/prepare_port muen
The next step is to create a build directory prepared for compiling Genode for
Muen. Use the create_builddir tool for this task:
! tool/create_builddir hw_x86_64_muen
You can customize Muen system by changing the --image-muen RUN_OPT parameters
in the 'build.conf' file in the build directory under build/etc.
The file contains explanatory comments above each configuration variable, which
are all set to their default values.
Muen systems are built for a specific hardware platform and by default the
system is built for the Lenovo T430s. All currently supported platforms have a
corresponding hardware specification which can be found in the Muen project
directory under 'policy/platform'. Note that the Muen project directory can be
found at '<genode_dir>/contrib/muen-*/src/kernel/muen'.
To get a list of all currently supported platforms issue the following command:
! ls contrib/muen-*/src/kernel/muen/policy/platform/ | cut -f 1 -d '.'
Set the --image-muen-hardware parameter to your intended hardware platform and
change the other parameters to match your environment.
If no platform configuration for your specific hardware is available, refer to
the README of the 'mugenplcfg' tool
[http://git.codelabs.ch/?p=muen/mugenplcfg.git] for instructions on how to
generate a new configuration.
You can now change to the created build directory and compile a Genode system:
! cd build/hw_x86_64_muen/
! make run/printf
Once the build is done, the Muen system which contains the Genode scenario is
available as a Multiboot binary image under 'var/run/printf/image.bin'. If an
error occurs during the Muen build process check the log file located at
'kernel/build.log'.
Automated hardware deployment
#############################
For automated deployment and execution on real hardware, the iPXE and AMT run
mechanisms provided by the Genode build system can be used. The modules are
controlled by the RUN_OPT variable specified in the 'etc/build.conf' file. An
example configuration for executing a Muen/Genode system on a real x86 machine
using AMT for resetting the target system and capturing the log output while
loading the Muen system image via iPXE:
!RUN_OPT += --include power_on/amt
!RUN_OPT += --power-on-amt-host 192.168.254.2
!RUN_OPT += --power-on-amt-password 'foo!'
!RUN_OPT += --include load/ipxe
!RUN_OPT += --load-ipxe-base-dir /srv/www
!RUN_OPT += --load-ipxe-boot-dir boot
!RUN_OPT += --include log/amt
!RUN_OPT += --log-amt-host 192.168.254.2
!RUN_OPT += --log-amt-password 'foo!'
The target machine is expected to request the following iPXE configuration:
http://${HOST_URL}/${ipxe-boot-dir}/boot.cfg. This can be achieved by building
iPXE with the following embedded script:
! #!ipxe
! dhcp
! chain http://${HOST_URL}/${ipxe-boot-dir}/boot.cfg
For additional information on iPXE and embedded scripts refer to the iPXE website
at [http://ipxe.org/howto/chainloading#breaking_the_loop_with_an_embedded_script].
The deployment host must serve the Genode system image via http. In the above
example the root directory of the webserver is '/srv/www'. Note that the
webserver must support ranged requests as otherwise iPXE will not load (large)
system image files correctly.
Integration of Muen with Genode
###############################
Instead of letting the Genode build system compile and assemble the complete
Muen system, you can let it only build a specific Genode base-hw run scenario
and then do the integration yourself. This will for example allow you to run a
simple script like run/printf on Muen in the Bochs x86 emulator
[http://bochs.sf.net], removing the requirement for having access to supported
hardware.
As a first step acquire the Muen sources by execute the following commands:
! git clone http://git.codelabs.ch/git/muen.git
! cd muen
! make SYSTEM=genode-base_hw_simple COMPONENTS="dbgserver sm tau0" emulate
This will build a Muen SK system and start it using the Bochs emulator. You
should get the following error:
! mupack: File '<muen_workdir>/pack/../policy/obj/base_hw' referenced by
! physical memory region 'base_hw|bin' not found
This means that the Muen packer tool was unable to find the component binary
'base_hw', which is expected since it has not yet been compiled.
Now it is time to build the Genode 'base-hw' image for Muen. To tell the Genode
build system that the Muen system integration is performed externallyby changing
the --image-muen-external-build parameter in the 'etc/build.conf' file within
your build Genode directory like so:
! RUN_OPT += --image-muen-external-build 1
After this change you can build the Genode 'base-hw' image and copy the
resulting raw binary file to the Muen working directory:
! cp var/run/printf/printf.bin <muen_workdir>/policy/obj/base_hw
Change back to the Muen working directory to package the system image and
restart emulation:
! cd <muen_workdir>
! make SYSTEM=genode-base_hw_simple COMPONENTS="dbgserver sm tau0" emulate
The serial output of the system is written to the
'<muen_workdir>/emulate/serial.out' file. You should see the following line:
! [init -> test-printf] -1 = -1 = -1
This indicates the successful execution of the Genode 'run/printf' scenario as
Muen subject on Bochs.