=========== Genode News =========== Genode OS Framework release 13.08 | 2013-08-15 ############################################## | We celebrate our 5th anniversary with the addition of three major features: | Qt5 on all kernels, profound multi-processor support on the NOVA and | Fiasco.OC kernels, and light-weight tracing of inter-process communication. The availability of Qt has always been one of the features that made our framework attractive to the microkernel community. We have closely followed the development of Qt5 and greatly appreciate the direction the Qt developers are heading to. Now that Qt5 has reached a stable state, the time is right for Genode to make the switch from Qt4 to Qt5. With the fresh port of Qt version 5.1 to Genode, Qt becomes available on the entirety of kernels supported by the framework. Component-based systems use to pose the difficulty of getting a holistic view on the system. The more complex the system scenarios become, the more inter-component communication takes place. Finding performance bottlenecks in such kinds of de-componentized systems tends to be much more challenging than in the world of monolithic systems. To overcome this challenge, the new version comes with tracing support deeply built into the framework. This facility is able to capture the interactions of Genode components between each other in a light-weight fashion with almost no side effects. As the third major addition, version 13.08 comes with substantial support for multi-processor systems, in particular for using Genode with the NOVA kernel. Within the NOVA developer community, this controversial topic has been discussed for several years. It seemed like NOVA's multi-processor model was inherently contradicting with the design of the Genode API. However, we have finally found a fairly elegant solution that makes multiple CPUs seamlessly available for Genode users on NOVA. Besides these highlights, the release comes with new SATA 3.0 and power-management drivers for the Samsung Exynos-5 SoC, updates the Fiasco.OC kernel and L4Linux, and introduces measures for verifying the integrity of downloaded 3rd-party source codes. Those and many more topics are presented in detail in the [http:/documentation/release-notes/13.08 - release documentation of version 13.08...] Genode OS Framework release 13.05 | 2013-05-30 ############################################## | The highlights of version 13.05 are new tools for automated testing and | benchmarking including a suite of networking benchmarks, added device drivers | for the Samsung Exynos 5 and Freescale i.MX SoCs, and new components for | the operation of headless systems. The growing diversity of Genode base platforms, in particular the variety of ARM-based SoCs, calls for quality-assurance measures that go beyond unit testing and Qemu-based integration tests: Genode's base functionality including device drivers need to be continuously tested and measured on real hardware. To automate this task, version 13.05 introduces extensive tooling support including a suite of networking benchmarks that operates on different levels of the networking stack. Speaking of broadening the hardware support, the new version enhances the existing base of device drivers for ARM-based SoCs with support for SATA, USB-3, eMMC, and networking on Samsung Exynos 5, as well as support for LCD display and touch-screen devices on Freescale i.MX SoCs. Furthermore, it features basic support for the Broadcom BCM2835 SoC, which is the heart of the popular Raspberry Pi platform. Apart from the extended pool of device drivers, there is a new facility for capturing LOG data to files stored on a file system, a command-line based user interface for managing Genode subsystems, and the addition of Linux/ARM as Genode base platform. The full story behind these and many more changes is detailed in the [http:/documentation/release-notes/13.05 - release notes of version 13.05...] Genode OS Framework release 13.02 | 2013-02-28 ############################################## | The version 13.02 takes a major leap with supporting the NOVA hypervisor by | fully embracing IOMMUs and NOVA's virtualization capabilities. Additionally, | the framework enables the use of ARM Cortex A15, comes with a new audio | interface, and introduces file-system notifications. Following the tradition to focus the February release on platform improvements, we dedicated the release cycle of version 13.02 to bringing the NOVA platform to new heights, revisiting several framework internals, and exploring the Exynos 5250 SoC based on ARM Cortex A15. The work on the NOVA platform pursued three goals: Improving the kernel to make it fit for Genode's highly dynamic work loads, leveraging the IOMMU support provided by the kernel, and tightly integrating the Vancouver virtualization solution with the Genode environment. These improvements combined turn NOVA into an intriguing base platform for Genode on x86 machines. Besides the x86 architecture, the framework receives new support for ARM Cortex A15 CPUs in the form of the Exynos 5250 SoC. We enabled Genode on this hardware platform using both our custom kernel as well as the Fiasco.OC kernel. Even though the current version is primarily focused on platform support, there are noteworthy functional improvements as well. A few highlights are a completely redesigned audio interface, added file-system notification capabilities, and a new fault-detection mechanism. These and many more improvements are described in elaborative detail in the [http:/documentation/release-notes/13.02 - release notes of version 13.02...] Road Map 2013 | 2013-01-15 ########################## | The updated road map provides the background and rough schedule for the | advances of the framework planned for 2013. The road map of 2013 encompasses four major topics: improving the framework infrastructure, using Genode as a self-hosting environment, tooling and optimizations, and hardware support. Before going into detail about each of those topics, the updated road map document takes the chance to look back at the outcome of 2012. Even though the project largely maintains its main motivation of last year to turn Genode into a real-world general-purpose OS, the planned work reaches out to challenges that lie beyond this immediate goal, in particular multi-processor scalability, support for IOMMUs, extended ARM SoC support, and improved virtualization on x86. [http://genode.org/about/road-map - Review our road-map for more details...] Genode OS Framework release 12.11 | 2012-11-29 ############################################## | With version 12.11, Genode has become able to execute the Genode build system | directly on microkernels, introduces audio drivers based on the Open Sound | System project, and largely revisits the platform mechanisms used on Linux. We are excited to report on a real break-through towards using Genode as our day-to-day OS. The just released version 12.11 of the Genode OS Framework bears the fruit of the extensive effort to enable the execution of the entire build system within the genuine Genode environment. On the course of this work, we improved the whole software stack ranging from the underlying kernels, over the framework infrastructure, third-party libraries, up to the actual tool-chain utilities. In the process, the official Genode tool chain has been updated to GCC 4.7.2. In addition to the primary topic of self-hosting Genode, the release largely revisits and improves the existing base platforms. The Linux platform support has been almost reinvented to accommodate the use of the framework as an attractive middleware solution on Linux. Our custom kernel platform for ARM hardware gained new SoC support for Freescale i.MX and Texas Instruments OMAP4. The NOVA, Fiasco.OC, and L4ka::Pistachio kernels have been updated and improved. With the addition of the new device driver environment for the Open Sound System, Genode users on the x86 platform have a new option for driving popular sound hardware. For users of the ARM-based OMAP4 platform, a new GPIO driver clears the way towards building more sophisticated system scenarios. To learn more details and background information about the current release, please continue with reading the [http:/documentation/release-notes/12.11 - release notes of version 12.11...] How Genode came to the Pandaboard | 2012-11-23 ############################################## | In the just published experience report, the Genode developers | provide insights into the process of porting the framework to | a new hardware platform, namely the popular Pandaboard. The new article [http:/documentation/articles/pandaboard - "How Genode came to the Pandaboard"] describes the steps to bring various peripherals such as HDMI output, networking, and SD-cards to live. Additionally, the report takes the reader along the long-winding road of performance optimizations. For those who are eager to try out running Genode on the Pandaboard, the article presents a example scenario that may serve as a good starting point. Learn more about [http:/documentation/articles/pandaboard - how Genode came to the Pandaboard...] Genode OS Framework release 12.08 | 2012-08-23 ############################################## | Version 12.08 introduces a way to execute the framework on bare ARM | hardware without the need for a separate kernel, adds comprehensive | device-driver support for the OMAP4 SoC, and revives NOVA as base platform. Succeeding the feature-rich version 12.05 released in May, Genode 12.08 focuses on enhancing the framework's platform support. With regard to the framework's supported kernels, we are happy to announce a new base platform called base-hw and the largely reworked support for the NOVA hypervisor. The new base-hw platform enables the execution of Genode on bare ARM hardware without the need for a separate kernel. Using this platform, the kernel's functionality is integrated with Genode's core into one program, leading to a significant reduction of software complexity at the root of the process tree. Among the existing base platforms, the NOVA hypervisor has received plenty of love. Motivated by NOVA's recent move to GitHub, we largely reworked the support for this base platform, enabling x86_64, adding object integrity protection, facilitating the use of process-local names only, and changing the way of how kernel resources are allocated. These changes combined promote NOVA to a first-class citizen among the supported kernels. The second string of development contained in the current release is the addition of comprehensive device drivers for the OMAP4 SoC. The new drivers cover HDMI output, SD-card access, USB HID, and networking. With the new device drivers in place, Genode can be leveraged on low-cost ARM platforms such as the popular Pandaboard. Besides low-level platform improvements, the current release comes with new functionality in the form of custom components and ported 3rd-party software. Among the additions are a FFAT-based file system service, the principal ability for on-target debugging, and a way to host the genode.org website on Genode. These and many more improvements are described in detail in the [http:/documentation/release-notes/12.08 - release notes of version 12.08...] NOVA Hypervisor supported on 64-bit x86 machines | 2012-07-27 ############################################################# | NOVA combines microkernel principles with capability-based security and | virtualization technology. The updated version complements the existing | x86_32 support with a new variant for x86_64. NOVA is a so-called microhypervisor for the x86 architecture. It combines the principles of microkernels with capability-based security and hardware-assisted virtualization. Genode supports NOVA as base platform since 2010. But because we used NOVA solely for sporadic research activities and NOVA was lacking a regular release schedule, Genode's platform support received only little attention. This has changed now. NOVA's main developer Udo Steinberg moved from TU Dresden to Intel Labs where he leads the development of NOVA as an Open-Source project. In fact, the code is now being hosted at GitHub. [https://github.com/IntelLabs/NOVA - NOVA on GitHub..] This ignited our renewed interest in promoting this platform to a first-level citizen of our framework. The first significant improvement is the recently added 64-bit support of NOVA. We enabled Genode to work with both variants of the kernel - 32 and 64 bit. We congratulate the NOVA developers to this new model of development and open collaboration and look forward to work closely together! Interview in Revista Espírito Livre magazine | 2012-06-20 ######################################################### | Issue 36 of the Brazilian Revista Espírito Livre magazine features a | comprehensive interview with Norman Feske. _(update: english version)_ The Brazilian Revista Espírito Livre is a magazine dedicated to Free and Open-Source software. With current issue 36, the Portuguese language magazine explores controversial questions about Internet freedom, privacy, neutrality among others. Genode seemingly represents a possible technical answer to some of these questions. In the comprehensive interview starting at page 35, co-founder of Genode Norman Feske talks about the background and motivation behind the project, describes the current structure of the community, and outlines his vision of the next generation of operating systems. [http://www.revista.espiritolivre.org/lancada-edicao-n-36-da-revista-espirito-livre - Issue 36 of the Revista Espírito Livre...] [http:/about/interview_rel36 - English version of the interview...] Genode OS Framework release 12.05 | 2012-05-30 ############################################## | The highlights of version 12.05 are our new USB stack, added media replay | capabilities, new support for dynamic system re-configuration, | and the ability to run the GNU tool chain on Genode. The just released version 12.05 is another corner stone for our plan to shape Genode into a general-purpose OS for the everyday use by its developers. It introduces numerious features that are crucial for this goal, in particular the groundwork for the use of file systems, the ability to execute the GNU tool chain directly on a Genode system, and a way to flexibly adapt the behaviour of operating-system components at runtime. In addition to working on the functionality outlined above, several of the framework's base platforms have received close attention. We profoundly revisited the platform-specific code for the Fiasco.OC kernel to fully leverage the kernel's capability concept. To facilitate the use of Genode as component framework on Linux, we extended the possibilities to use Linux-specific mechanisms, in particular chroot, in a way that is easy to use and coherent with the framework's architecture. For the full story behind all the new features and improvements, please refer to the [http:/documentation/release-notes/12.05 - release notes of version 12.05...] Genode participation at GSoC 2012 | 2012-04-25 ############################################## | Tobias Börtitz steps up to the challenge of combining the HelenOS kernel | with the Genode userland. Google has announced the list of scholarships accepted for this year's Google Summer of Code program. Thanks to HelenOS being an accepted mentoring organization, we are happy to announce the project of Tobias Börtitz, who will bring the worlds of HelenOS and Genode closer together: :[http://trac.helenos.org/ticket/419 - HelenOS as a Genode platform]: Genode Labs will support Tobias on his quest. His mentor will be long-time Genode developer Stefan Kalkowski. We are looking forward to working together on this intriguing topic! New dynamic run-time configuration support | 2012-04-11 ####################################################### | A new mechanism for re-configuring subsystems at run-time paves the way | to sophisticated general-purpose usage scenarios. Genode's approach to system configuration facilitates a unified way for supplying parameters to individual components as well as to entire subsystems. Thanks to the recursive nature of Genode, complex system-integration problems can be segregated into multiple problems of low complexity whereas each partial problem retains to be individually testable. Thereby, this solution greatly mitigates the manual labour of system integration even for highly complex scenarios. However, until now, the mechanism was limited to supplying configuration parameters at the creation time of components. Once a component is running, it was expected to adhere to a fixed predefined policy. With Genode's move towards general-purpose computing, many use cases are popping up where this limitation becomes a hindrance, for example the dynamic changing of screen resolutions, mixer settings, user-input calibration, and GUI policies. To accommodate such use cases, we have extended Genode's configuration concept with support for re-configuring components at runtime. The new feature has landed in the master branch just now: :[https://github.com/genodelabs/genode/commit/9a00ad7ae3ac8e4fd4867555db7671df34aac882 - Commit introducing dynamic re-configuration]: In addition to alleviating the problems mentioned above, the new mechanism enables many new opportunities to use Genode's slave pattern in creative ways. To illustrate how this is supposed to work, the commit contains examples for dynamically generating configuration data by a separate service as well as by the master of a slave component. GSoC 2012 application rejected | 2012-03-17 ########################################### | Unfortunately, Genode Labs was not accepted as mentoring | organization for this year's Google Summer of Code program. We just received the following notification from Google: :
: Thank you for submitting "Genode Labs" organization application to
: Google Summer of Code 2012. Unfortunately, we were unable to accept
: your organization's application at this time. We received many more
: applications for the program than we are able to accommodate, and
: we would encourage you to reapply for future instances of the program.
:
: Best regards,
:
: Google Open Source Programs
: 
Google Summer of Code 2012 | 2012-03-08 ####################################### | Genode Labs applies as mentoring organization at the Google | Summer of Code 2012 program. If you are a student interested in working on a Genode-related topic during the summer, the application of our project to this year's Google Summer of Code (GSoC) program may provide you with the perfect opportunity. If accepted, you will be able to work on one of a wide range of intriguing topics, get hands-on experience with advanced OS technology, and learn from the methodologies of long-term systems architects and developers mentoring your work. Learn more about Genode's aspired participation in GSoC 2012 at our dedicated [http:/community/gsoc_2012 - Google Summer of Code 2012 website...] Genode OS Framework release 12.02 | 2012-02-28 ############################################## | Version 12.02 comes with a new API for MMIO access, a new ACPI driver, | fork support for the Noux runtime, Qt version 4.7.4, and special support | for using Genode as application framework on Linux. We took the current release cycle as opportunity to carry out our plan to open up our development process. Because carrying out such a fundamental change of our work flows and tools bears many risks, we were curious about the outcome of this undertaking. We can happily report that the transition went actually better than expected. Genode 12.02 is the first version conducted under a completely open development model. The new version contains the first steps towards the goal of using Genode as general-purpose OS for the daily use by its developers. The Noux runtime environment has been enhanced with support for the fork system call, which enables us to run the bash shell and coreutils natively on various microkernels. A new ACPI driver paves the ground for using the whole feature set of Fiasco.OC and NOVA on recent x86-based hardware platforms. Furthermore, you can find the first bits of a new device-driver manager. The framework's base API has been enhanced to foster code reuse and robustness. For example, we introduced a new API for accessing memory-mapped I/O resources, which facilitates the use of the C++ type system to simplify device drivers. Another example is the added API support for the common pattern of reusing existing components as sandboxed libraries. These and many more changes are described in full detail in the [http:/documentation/release-notes/12.02 - release notes of version 12.02...] Slides of our talks at FOSDEM 2012 | 2012-02-14 ############################################### | The slides for both Genode-related talks at FOSDEM 2012 are available. At this year's FOSDEM, the Genode project was present with two talks and the participation in a panel discussion at the microkernel developer room. Norman Feske held an introductory talk, presenting Genode's architecture and demonstrating several use case live: :[http://genode-labs.com/publications/nfeske-genode-fosdem-2012-02.pdf - Introducing Genode]: Stefan Kalkowski presented his experience with supporting many different kernels as base platforms of Genode: :[http://genode-labs.com/publications/skalkowski-diversity-fosdem-2012-02.pdf - The agony of choice - the diversity of microkernels in Genode]: The abstracts of both talks are available at the updated [http:/about/publications - publications section]. Source code moved to GitHub | 2012-01-17 ######################################## | GitHub has become the central place for Genode's mainline development. Moving Genode's code base to the new public GitHub repository represents the final step on our agenda to open up our development process. From now on, the 'genodelabs/genode' repository is where the current development happens: :[https://github.com/genodelabs - Genode Repository at GitHub]: To follow the development of the master branch, you may like to subscribe to the corresponding [https://github.com/genodelabs/genode/commits/master.atom - Atom Feed]. In addition to having moved the code over to the new repository, our documentation and website underwent several changes. First, the genode.org website has been migrated away from the original Plone CMS to an entirely static custom-made CMS that fetches its content from the 'genodelabs/genode' repository. Thereby, most of the web-site content has been incorporated into the repository and will be managed through Git. Second, the Wiki is no more. Its content has been moved to the normal documentation section. By using Git for the documentation, the process of contributing to the documentation is streamlined with the way of how code contributions are handled. The steps of this process are described in the updated [http:/community/contributions - how-to-contribute] guide. So far, our experience with using GitHub for hosting the Genode development has been a smooth and overly enjoyable ride. We hope you will appreciate the greatly liberated development process as much as we do. Genode at FOSDEM | 2012-01-04 ############################# | Meet us at FOSDEM 2012, to be held on 4-5 February in Brussels. FOSDEM is one of the world's largest events of the Free-Software and Open-Source-Community. :[http://fosdem.org/2012 - FOSDEM 2012, 4-5 February, Brussels, Belgium]: This year, it will feature a dev room specifically dedicated to multi-server and microkernel-based operating systems. The list of participating projects include HelenOS, MINIX, GNU Hurd, and Genode. The dev room will host talks, discussion sessions, and demonstrations. Among the talks, there will be an introduction of the Genode OS Framework presented by Norman Feske: :Abstract: _Today's operating systems try to find a balance between seemingly_ _conflicting goals. Ease of use is traded against security, resource_ _utilization is traded against resource accountability, and system_ _complexity is traded against scalability. For example, SELinux is ill_ _famed as hard to use and consequently remains widely unused. As another_ _example, isolation kernels minimize the complexity of critical system_ _software but at the cost of limiting these solutions to static applications._ _The Genode OS architecture shows how these apparently inherent conflicts_ _can be solved by operating-system design. By combining a recursive_ _system structure with capability-based security, mandatory access_ _control becomes easy to deploy. At the same time, the trusted computing_ _base can be minimized for each application individually such that the_ _attack surface for security-critical system functions gets reduced by_ _orders of magnitude compared to existing approaches. Furthermore, a_ _concept for trading physical resources among processes allows for_ _dynamic workloads while maintaining quality of service. That is not just_ _theory - the system is ready for demonstration and its developers are_ _planning to use it as development environment by the end of 2012._ _After a brief introduction of where Genode comes from, the main part of_ _the talk will be focused on the OS architecture and give a glimpse at_ _the implementation via live demonstrations. Finally, the talk will_ _briefly discuss the planned steps towards using Genode as_ _general-purpose OS._ For everyone interested in operating systems in general and microkernel technology in particular, this year's FOSDEM is a great opportunity to get in touch. We are looking forward to meeting you in Brussels! Road Map 2012 | 2012-01-02 ########################## | The road map for 2012 envisions the use of Genode as everyday development | platform. The overall theme for Genode in 2012 will be the practical use of our OS technology for carrying out regular development work. We see this as the best way to proof the maturity of the framework. Furthermore, by eating our own dog food, we generate a strong incentive for ourself to address topics that would otherwise be deferred. For assembling the road map, we introspected ourselves and identified a list of functionalities that we could not live without, ranging from a Unix-like command-line interface, over the support for specific PC hardware, to fancy features such as a tiled window manager. We plan to publish four releases at our quarterly release cycle. So the list of desired functionalities are spread throughout those releases. However, each release will have a different emphasis. Version 12.02 will be geared towards the usage scenarios that we are going to present at our next Live CD scheduled for March. For version 12.05 we are planning a major rework of our arsenal of Linux-based device drivers. The release 12.08 will be the tipping point for making the initial switch to Genode by including Intel wireless drivers and a tiled window manager. Towards the end of the year, we will take the opportunity of version 12.11 to optimize the support for our beloved Lenovo Thinkpads and bring additional tools such as emacs to the table. [http://genode.org/about/road-map - Review our road-map for more details...] New issue tracker at Github | 2011-12-20 ######################################## | To promote open development, the new issue tracker replaces both the public | tracker at Sourceforge and the tracker formerly internal to Genode Labs. As promised earlier, Genode has got a new issue tracker at Github: :[http://github.com/genodelabs/genode/issues]: Please use this tracker to report and discuss Genode-related issues from now on. The old public tracker at Sourceforge is still there but all issues have been either closed or migrated to Github. Steps towards an open development process | 2011-12-05 ###################################################### | Genode is going to embrace an open and transparent development process. Posted by Norman Feske at the Genode mailing list: Over the past four years, the Genode OS Framework has seen rapid progress. Skimming over the release notes of the past releases makes me very proud. It is clear that the project's development is going stronger than ever. However, at the same time, I recognise that progress on a technical level is only one part of a successful Open-Source project. A certainly even more important part is the participation of a diverse community. This is where our project is vastly underdeveloped. By continuing the development at status quo, Genode will continue to steadily improve but it will not be able to capture a significant position in the operating-systems world. Instead, it will possibly remain a curiosity. Therefore, we Genode developers regard the transition of our work to an open and transparent development process as the next big challenge we want to tackle. Review of the situation ======================= Even though Genode is an Open-Source project, its development has been pursued largely behind the closed doors of our company Genode Labs. The planning of the road map, most technical discussions, issue tracking, and revision management are used to be done within the company. There had been two reasons for this policy namely the preservation of exclusivity and the efficiency of coordination. Regarding the first reason, when we started our business, we desired to preserve a certain degree of competitive advantage to ourselves by keeping some information "protected" from the public eye. For example, revealing the detailed history of the over 5000 source-code revisions of the project would enable any outsider or competitor to deeply analyze the way of how our company works. These concerns had been acknowledged by other startup companies with statements in the line of "Open-Source has hurt our business". The second reason is the way of how humans intuitively work together in a non-distributed environment such as a our small company. Instead of discussing technical matters on a mailing list, it appears to be much easier and presumably more efficient to engage in face-to-face conversations. The writeup of our releases notes at regular intervals served us as an instrument to recapture the rationale behind our discussions and document it. This worked exceedingly well. In comparison, discussing every detail on a mailing list seems to be inconvenient. Why do we desire a change? ========================== The answer to this question can be put quite simply as "to make the project relevant". But it goes deeper than that. First, we see ourself as Free-Software AND Open-Source advocates. I wholeheartedly disagree with statements that suggest that Open Source is incompatible with having a business. For us, the contrary is true. Without Free and Open-Source Software, there would be no Genode Labs. The great wealth of the GNU software stack forms the basis of all the tools we use every day and it plays a significant role for our passion to develop software. Furthermore, Genode would not be of much value without all the great building blocks in the form of existing Open-Source code that we reuse in our context. Hence, it is our personal desire to contribute to the Free and Open-Source software world and to intensify the collaboration with other projects with the same spirit. We still see the preservation of a certain degree of exclusivity as important for our dual-licensing business model. If we made Genode available under the BSD license, there would be not point in pursuing this model. However, hiding the development process from the public is not only poor-spirited but it creates an artificial barrier for people who want to participate. The book "Producing Open Source Software" (http://producingoss.com) by Karl Fogel was an eye opener to us. Regarding the efficiency of collaboration, I have to admit that the statement above about how great the current way works is really not well-founded - simply because we haven't tried the alternative to discuss everything in public, yet. Obviously, we are risking to spoil our presumed efficiency by changing the mode of collaboration. On the other hand, by documenting the process of solving each problem in the form of public mailing-list postings, we give everyone the chance to contribute to and to learn from our findings. The next steps ============== We take the current release cycle as opportunity to execute our plan to open the development process. Our coarse schedule is to migrate our internal issue tracker to the public until mid of December. From this day on, all issues will be tracked publicly. The place for all technical discussions will be the Genode mailing list. Until mid of January, we will prepare a new public source-code tree in the form of a Git repository that we will then use as mainline development tree. As a further change of policy, we plan to include all documentation as found on the website in the mainline repository and remove the Wiki. This way, contributions to the documentation will be handled in the same way as code contributions. I hope that our designated change is in the interest of all of you and I look forward to see how it will impact the further progress of Genode. Best regards Norman Genode OS Framework release 11.11 | 2011-11-29 ############################################## | With version 11.11, we explore a plethora of options of combining Genode with | virtualization techniques. The overall theme of Genode 11.11 is the exploration of various levels of virtualization, ranging from faithful virtualization, over paravirtualized Linux, to custom variants of OS-level and application-level virtualization. The latter approach is particularly related to Genode and provides us with a novel approach to user-level debugging. Each of the experiments were conducted with concrete goals. The goal for enabling faithful virtualization was to integrate the high-performance Vancouver virtual machine monitor (VMM) into Genode. This VMM implementation used to be tied to a NOVA-specific user land. With Genode 11.11, it becomes apparent how this virtualization technology and Genode's component framework can cross-fertilize. Our work on paravirtualized Linux was motivated by the goal to execute Android as a node in Genode's process tree. Based on the L4Android project and L4Linux, our work comprised the implementation of Genode-specific stub drivers for L4Linux. This way, L4Linux can be tightly integrated with Genode interfaces for block devices, framebuffer, input, UART, and network. With Noux, Genode brings along a custom OS-level virtualization approach aiming at the execution of unmodified command-line based GNU software on Genode. The immediate goal for this release was to develop Noux to a level that enables us to run VIM as Genode sub system. This work involved extending the Noux runtime as well as creating a terminal emulator. For the highest abstraction level of virtualization on Genode, we coined the term application-level virtualization. Enabled by the sandboxing inherent to Genode's architecture, we implemented a solution for user-level debugging via the GNU debugger. The solution fits perfectly with the Genode architecture and provides powerful debugging facilities without compromizing the security of the system. To learn more about those and many other improvements, please read on the [http:/documentation/release-notes/11.11 - release notes of version 11.11...] Android on top of Genode | 2011-09-27 ##################################### | With the new support for L4Android, the Android software stack can be used as | Genode sub system. As of today, Google's Android OS is apparently one of the hottest topics in the world of smartphones and tablets. Among the users of Genode, we recognise a general interest in combining the framework with the Android platform. With L4Android there already exists a special variant of the L4Linux kernel that is able execute the Android software stack on top of the Fiasco.OC kernel. Our port of L4Linux to Genode in May has shown that L4Linux works well with Genode. Since L4Android is derived from L4Linux, we were confident that we could adapt L4LAndroid to Genode in a similar way. We are happy to report that this feature has now become available at our subversion repository. With the new support of L4Android on Genode, Android can be used on Genode on the Fiasco.OC kernel on the IA32 architecture. For those of you who are eager to experiment with L4Android on Genode, please find further information at the top-level [http://genode.svn.sourceforge.net/viewvc/genode/trunk/ports-foc/README - README] file of the 'ports-foc' repository and share your results with us at the [http:/community/mailing-lists - Genode mailing list]. Genode OS Framework release 11.08 | 2011-08-17 ############################################## | Version 11.08 introduces a unified workflow for dealing with all microkernels | supported by the framework. This way, application scenarios can be ported | from one kernel to another in an instant. The Genode OS Framework aspires to provide a common ground for creating microkernel-based operating systems, relieving developers from wasting efforts in duplicating other people's work such as implementing basic device drivers, tools, and application runtimes. Because in the microkernel domain, each development poses different requirements, there is no single microkernel that fits all purposes. Instead, there exist a plethora of different kernels, each focused on different use cases. By supporting as many as 8 different kernels at API level, Genode allows users of the framework to develop an application once while preserving the freedom to pick the kernel that fits best with the use case at hand. Still, each kernel uses to come with different tools, configuration mechanisms, and boot concepts. Even though Genode programs can be developed in a kernel-independent way, the deployment of such programs still required profound insights into the peculiarities of the respective kernel. The new version 11.08 of the framework addresses these concerns by providing a unified workflow for all supported kernels. Downloading and using a different kernel has become a matter of a few minutes and requires no prior knowledge about the kernel. In addition to the new tooling support, the current release advances the framework's block-device infrastructure and extends the support for ARM platforms. There are several new drivers for peripheral devices such as AHCI, SD-card, and IDE, a new block-partition service, and libc support for accessing VFAT partitions. The ARM support has been extended to cover both L4Linux (on Fiasco.OC) and Qt4 (ARMv6, ARMv7). Furthermore, the new version is accompanied with a comprehensive documentation update. Read [http:/documentation/release-notes/11.08 - the full story] about the various improvements that come with the version 11.08... Genode OS Framework release 11.05 | 2011-05-26 ############################################## | The Genode version 11.05 advances the Fiasco.OC platform support to the same | level as the other fully-featured base platforms, enables the use of L4Linux | with Genode, and introduces a brand new API for inter-process procedure calls. Fiasco.OC is a modern microkernel developed at the OS Group of the University of Technology Dresden. It is highly regarded for two reasons, its comprehensive support for different CPU architectures and the user-level variant of the Linux kernel called L4Linux. Now, those advantages have become available to the users of Genode. Thereby, new usage scenarios can be realized by combining the L4Linux virtualization solution with Genode's rich set of components such as Qt4, lwIP, and a growing number of device drivers. Our custom kernel implementation for MicroBlaze-based SoCs has undergone a major upgrade to enable the implementation of user-level device drivers. To make this platform easy to explore, the release is accompanied with a reference SoC that is ready-to-use on the Xilinx Spartan3A Starter Kit. The most significant API-related change of the framework is a brand new API for implementing remote procedure calls across process boundaries. The new RPC API takes our experience during last 5 years of Genode development into consideration and alleviates long standing shortcomings of the original inter-process communication API. To pave the way towards the use of Genode for productive use, we have started to explore ways to make standard debugging solutions available to Genode. Our new GDB monitor implementation speaks the GDB protocol over TCP/IP and thereby enables the GNU debugger to inspect a user-level Genode process via a remote connection. Read the complete story about these and many more changes in the [http:/documentation/release-notes/11.05 - release notes of version 11.05...] Exciting challenges ahead | 2011-03-24 ###################################### | Explore more than 30 new Genode-related project proposals at our challenges | wiki page With each new Genode release, the scope of feasible use cases for the framework grows and motivates us to reach out for new ambitious goals. There is a dedicated [http:/community/wiki/Challenges - Wiki page] for collecting those ideas. After having released the version 11.02 of the framework, we took the chance to reiterate the many ideas that popped up recently, ideas ranging from the support of diverse potential base platforms, over creative combinations of Genode with other Open-Source projects, to novel tools and applications. So if you are curious about what kinds of projects we have in mind in the mid term, have fun browsing through the project proposals. If one of these topics catches your interest, we'd be happy about you joining in with the development or discussing those ideas at our [http:/community/mailing-lists - mailing list]. Also, if you have additional ideas, please do not hesitate to tell us more. Discover the Wiki page about our [http:/community/wiki/Challenges - future challenges...] Norman Feske introduces Genode on YouTube | 2011-03-10 ###################################################### | Bas de Lange has published the footage of Norman Feske's talk at the Software | Freedom Day 2010 in Amsterdam In his talk, Norman Feske sheds light on the background behind the company Genode Labs, introduces the Genode OS architecture, and demonstrates the concepts live. The talk was recorded at the [http://www.softwarefreedomday.eu - Software Freedom Day 2010] event in Amsterdam. Thanks to Bas the Lange for publishing the material. : : : : : : : [http://www.youtube.com/watch?v=Z1IMV3FJO7Q - Visit the YouTube page...] Genode OS Framework release 11.02 | 2011-02-24 ############################################## | Version 11.02 of the framework adds support for the Fiasco.OC and NOVA v0.3 | kernels as well as a new custom kernel platform targeted at softcore CPUs. | Furthermore, we introduce the Noux execution environment for using GNU | software natively on Genode. The Genode project takes another leap forward regarding the use of different kernels as base platforms for using the framework. The new supported Fiasco.OC kernel offers a rich feature set that is unmatched by any other open-source microkernel. It works with the x86_32, x86_64, and ARM architectures, features capability-based security, scales to multiple CPUs, and provides special optimizations for running virtualized operating systems on top. Genode can now leverage the advanced features of this kernel, in particular those related to enforcing strict security policies. With NOVA and Fiasco.OC, there have now become two kernels available that are capable of enforcing Genode's security architecture at kernel level. Speaking of NOVA, we are happy to report to have upgraded Genode's NOVA support to version 0.3 of the kernel. This version was released earlier this month and brings many of the features we desired, the most important being the revocation of resources. With the new version, NOVA has now become a base platforms that supports the entire Genode API without compromises. In addition to broadening the support for existing kernels, we have started to reach out into kernel land for running Genode on softcore CPU as found in FPGA-based SoCs. Our custom kernel architecture achieves a further reduction of TCB complexity by consolidating kernel functionality with Genode's user-level core. The current implementation is able to run core and multiple instances of nested init processes on the Xilinx MicroBlaze CPU. The most significant functional addition to the framework is a new execution environment called Noux that enables running unmodified GNU software on top of Genode. Even though in an early stage, Noux is already able to execute GNU coreutils without requiring manual porting work. Read on about further details regarding the new kernel platforms, the vision behind Noux, and many more improvements of the framework in the [http:/documentation/release-notes/11.02 - release notes of version 11.02]. Genode OS walk-through on YouTube | 2010-12-22 ############################################## | Check out our new screencast presenting the Genode Live CD 10.11. For those of you who like to get a glimpse of our recently released Live CD but hesitate to download and boot the ISO image, we have prepared the following screencast with a guided walk-through. Enjoy! : : : : : : : [http://www.youtube.com/watch?v=CJdWOmajo_8 - Visit the YouTube page...] [http:/download/live-cds - Download the real thing...] Genode OS Framework release 10.11 | 2010-11-30 ############################################## | With version 10.11, Genode has become able to run network drivers of the gPXE | project, employ user-level on-demand paging, and use advanced graphics with | the nitpicker GUI server. With the [http:/download/live-cds - recently published Live CD], the Genode project has reached a new stage by integrating advanced device drivers, complex protocol stacks, and real-world applications into one dynamic setup. The new Genode release 10.11 bears fruit of the intensive effort that went into this important milestone. There are improvements and functional additions all over the code base. To highlight a few, we enhanced the Nitpicker GUI server to support alpha blending, added an execution environment for running network drivers of the gPXE project, completed the implementation of Genode's concept for user-level page-fault handling, and further advanced the integration of the paravirtualized Linux kernel with Genode's native interfaces for networking, block-device access, graphics, and audio. Furthermore, the release comes with a number of new components such as a virtual network bridge and a http-based block server, which can be combined with the existing components to open up new use cases of the framework. Please enjoy the [http:/documentation/release-notes/10.11 - full description] of all the improvements that come with version 10.11. Genode Live Demonstration 2010-11 | 2010-11-16 ############################################## | The new Genode Live CD showcases the vast functional progress during the past | year in a selection of five demos ranging from native Qt4/Webkit support to | hardware-accelerated 3D graphics. Since the release of the previous Genode Live CD in September 2009, we focused our development work on supporting native Qt4/Webkit applications, user-level Linux, sound support, Mesa/Gallium3D, block drivers, and a networking stack. Furthermore, we paid special attention to tightly integrate existing software with native Genode features. Two prominent examples are the seamless integration of a virtualized Linux desktop and the support for running complete Genode subsystems as plugin in the Arora web browser. In response to several requests to complement our regular source-code releases with a new bootable live CD, we have now published a new version. You can now test drive the current version of Genode on your PC (or virtual machine) to get an idea about where the development of the framework is heading. [http:/download/live-cds - Download the new live CD] featuring five setups showcasing our efforts of the past year. Genode OS Framework release 10.08 | 2010-08-11 ############################################## | With Gallium3D, MadWifi, and a new block-driver infrastructure, the release | 10.08 takes Genode's device-driver support to the next level. Wireless networking and hardware-accelerated graphics are commonly regarded as two of the most sophisticated domains when it comes to device-driver support in operating systems. We are proud to have taken the challenge to support these device classes in the Genode OS Framework. The just released version 10.08 comes with support for the Gallium3D software stack alongside the Intel graphics execution manager, which enables Genode applications to perform hardware-accelerated 3D graphics on Intel GMA platforms. Our port of the MadWifi wireless stack pushes the limits of what can be done with our Linux device-driver environment. Furthermore, we extended our device-driver-related activities to block devices, resulting in a new block-device interface and an ATAPI driver accompanied with an ISO 9660 file system. Apart from device drivers, there are numerous other improvements such as the upgrade to Qt4.6.3 and support for dynamic linking on platforms using ARM EABI. Please find more in-depth information in the detailed [http:/documentation/release-notes/10.08 - release notes of version 10.08...]. Genode OS Framework release 10.05 | 2010-05-27 ############################################## | The new version 10.05 adds support for mandatory access-control policies, | introduces audio playback, and improves the integration of the paravirtualized | OKLinux kernel with the framework. With the current release, we focused on functionality to broaden the application area of the framework. The infrastructure of the framework has advanced to a point that allows running a steadily growing number of typical general-purpose applications directly on Genode. This is best illustrated by the fully functional Arora web browser running as a native Genode process. Still, there are a large number of usage scenarios that rely on Linux applications. For this reason, we further improved the integration of the paravirtualized OKLinux kernel with Genode. The new version adds support for seamlessly integrating the X Window System running on OKLinux with the native nitpicker GUI. For Genode developers, there is a new build system, which significantly improves the build performance on multi-processor systems. Read on about these and many more improvements detailed in the [http:/documentation/release-notes/10.05 - release notes of version 10.05...] Adaptation to Codezero kernel v0.3 | 2010-04-06 ############################################### | The just released version 0.3 of the Codezero kernel adds support for the | latest ARMv7 CPUs. The Genode OS Framework is now ready to be used with this | new kernel version. Since version 10.02, the Genode OS Framework officially supports the version 0.2 of the [http://l4dev.org - Codezero microkernel] developed by [http://b-labs.com - B-Labs]. The road map of this kernel promised support for the latest ARM CPU cores. With the just released version 0.3, which added support for ARMv7 CPU cores, the project lives up to this promise. In addition to the extended CPU support, the new release adds important functionality regarding device I/O, which prompted us to adapt Genode to the new version. The adaptation to Codezero version 0.3 is now available at our Subversion repository. To facilitate the use of Genode with Codezero, we created a dedicated [http:/community/wiki/GenodeOnCodezero - Wiki page], which provides up-to-date documentation about building and using Genode on this kernel. Thanks to the Codezero developers for being extremely responsive to our questions and feature requests! Learn more about [http:/community/wiki/GenodeOnCodezero - using Genode with Codezero...] Genode OS Framework release 10.02 | 2010-02-24 ############################################## | Among a variety of platform-related improvements, the release 10.02 adds | support for the NOVA and Codezero kernels and introduces a new concept for | managing real-time priorities. Succeeding the previous feature-rich release, the Genode project took the chance to focus on extending the base-platform support of the framework. We are happy to report that we were able to complement the already broad range of supported kernels by two new modern microkernels namely NOVA and Codezero, both first released in 2009. Thereby, Genode provides a unified user-level infrastructure that runs directly on those kernels as well as on Linux (32 bit and 64 bit), OKL4v2 (x86 and ARMv4), L4/Fiasco, and L4ka::Pistachio. For developers creating microkernel-based applications, the framework hides the intricacies of the respective kernel. But it also strives to make the unique capabilities of each base platform accessible to the user. For example, with the new release, we made the real-time scheduling of OKL4 and L4ka::Pistachio available to Genode applications. Read on the full story about our experiences with the new kernels and the many [http:/documentation/release-notes/10.02 - improvements of the release 10.02...] [http:/download/latest-release - Download the latest release...] Road map 2010 | 2010-01-04 ########################## | We have updated our road map with the planning of the year 2010. With the start of the new year, its time to pause for a moment, looking back the progress we made during 2009, and planning the next steps. The overall theme of 2009 was the creation of fundamental base functionality to make the framework usable for practical applications. We are proud when revisiting the long list of achievements introduced with the four releases of the past year: Support for the OKL4 and l4ka::Pistachio kernels, Linux device-driver environment, networking, USB input and storage, dynamic linking, Qt4 including Webkit, and support for a paravirtualized Linux kernel. With this strong foundation in place, its time to raise the bar again. [http:/about/road-map - Please read on about our updated road map for 2010...] Genode OS Framework release 9.11 | 2009-11-25 ############################################# | With release 9.11 Genode gets Webkit, USB storage, TCP/IP stack, support for | ARM, OKLinux and more ... For the project, the current release is a major leap towards the goal of Genode to become a general-purpose OS platform. The addition of OKLinux - a paravirtualized Linux kernel - to the distribution makes it possible to run security-sensitive native Genode applications side by side with unmodified Linux binaries. This particular version of Linux has no direct hardware access but rather uses native Genode services as virtual hardware devices. With respect to available device classes, we extended Genode's support to cover USB storage and networking drivers. Moreover, the porting of the Light-weight IP stack and Q4/Webkit now enables developers to create web applications on top of Genode. Beside the new functionality, Genode's platform scope was broadened by initial support of the ARM architecture. Read on about these and all additional changes in more detail in the [http:/documentation/release-notes/9.11 - release notes for Genode 9.11...]. Genode Live Demonstration 2009-09 | 2009-09-02 ############################################## | The latest release of the ready-to-boot Live CD image is available. The Live CD features the graphical demonstration of the Genode architecture, known from the last Live CD. But this time it doesn't run on L4/Fiasco only. It also can be started on top of the L4 microkernels OKL4 and Pistachio. Moreover, it features QT4 application support and a para-virtualized Linux version running on top of Genode. The Live CD runs directly on PC hardware and has been tested on Qemu/KVM and VirtualBox. _Edit: We have further improved the performance of the L4/Fiasco and_ _L4ka::Pistachio demos, and refined the presentation of the Qt4 demo._ [http:/download/live-cds - Download the updated Live-CD image...] Genode OS Framework release 9.08 | 2009-08-19 ############################################# | The release 9.08 advances the portability of the operating-system framework | to a new level. We have released the version 9.08 of the Genode OS Framework. The general theme of this release has been refinement. We are particularly happy for having resolved long standing concerns about our locking and signalling implementations. The actual focus of our work during the last three months was the unification of all supported base platforms resulting in many generalizations of former platform-specific code. We managed to bring the code for the Linux version very much in line with the supported L4 platforms, reducing platform-specific source-code complexity and maintenance costs. Feature-wise, the most important news are the port of the dynamic linker from FreeBSD, the added support for thread-local storage, a much improved timer service, and core extensions for running Linux on the OKL4 version of Genode. Read on about all the changes in the [http:/documentation/release-notes/9.08 - release notes for Genode 9.08...] Document about Genode's native Qt4 port available | 2009-07-06 ############################################################## | The document "Portierung von Qt auf Genode" (german) describes the | undertaking of making the Qt4 framework natively available on Genode. Among | many technical insights, it provides an overview about the integration with | Genode's GUI, and explains how Qt4's low-level interfaces are mapped to | native Genode functionality. Qt4 is a popular and versatile C++ framework for developing platform-independent GUI applications. In addition to GUI-related functionality, Qt4 covers a comprehensive library of data structures and platform abstractions. It is widely used for both commercial and open-source applications, most prominently, it serves as the foundation of the KDE project. Since the release 9.05, the official distribution of Genode supports Qt4 as a regular feature. The document "Portierung von Qt auf Genode" _(german)_ describes the challenging endeavor of porting this high-complexity C++ framework to Genode. Major problems to overcome had been the missing C libary (at the time when the project started), the integration of the Qt4 project files with Genode's build system, the adaption of Qt4 to the basic primitives provided by Genode, and the integration of Qt4 with Genode's GUI. In addition to the mentioned technical insights, the document evaluates the achieved solution with respect to compatibility and maintainability. [http://www.genode-labs.com/publications/qt4-on-genode-de-2009.pdf - Download the PDF...] Genode OS Framework release 9.05 | 2009-05-27 ############################################# | With the release 9.05, we introduce the first fragments of USB support, | update Qt to version 4.5.1, and add the OKL4 kernel as supported base | platform. The new release continues the general theme to enhance our potential user base by broadening the base-platform support and, at the same time, extending the functionality of the framework. We have now added the OKL4 kernel to the supported base platforms. OKL4 is a commercial-grade kernel developed by [http://www.ok-labs.com - Open Kernel Labs] and primarily targeted at embedded systems. Along with this integration work, we were able to further advance the portability of Genode by generalizing much of former platform-dependent code. On the feature side, we introduced the first parts of a USB stack, making Linux' USB host-controller drivers and a human-interface device driver available on Genode. As outlined in the release notes, there is also good progress on executing Linux as a sub system of Genode. Furthermore, we have now seamlessly integrated the support for the Qt application framework into the Genode source tree and bumped the version to 4.5.1. Read on about the new features described int the [http:/documentation/release-notes/9.05 - release notes...] [http:/download/latest-release - Download the release 9.05...] [http:/about/road-map - See our updated road map...] Bringing Genode to the OKL4 kernel | 2009-05-06 ############################################### | We have enhanced the range of supported kernel platforms by bringing Genode | to the OKL4 kernel developed by Open Kernel Labs. With the port of Genode to the OKL4 kernel, we have taken another step to reach a broader user base of the framework.  In contrast to the already supported microkernels L4ka::Pistachio and L4/Fiasco, the OKL4 kernel developed by [http://ok-labs.com - Open Kernel Labs] is largely deployed in commercial settings. Even though being a member of the L4 family of kernels, OKL4 has a much modernized kernel API that fits quite well with the Genode architecture. For example, OKL4 does not rely on an in-kernel mapping database, frees the IPC operation from wall-clock timeouts, supports asynchronous notifications, and provides kernel support for user-level synchronization. In the process of porting Genode to OKL4 version 2.1, we took the chance of generalizing a lot of former L4-specific code such that the remaining platform-specific code is now in the order of less than 2,000 lines of code for each kernel platform. To ease future ports of the frameworks to other kernels, we have documented our work in detail. If you are interested in learning more about the OKL4 kernel from our perspective, or if you like to dive right into the inner parts of the Genode OS Framework, read on about [http:/documentation/articles/genode-on-okl4 - Bringing the Genode OS Framework to the OKL4 kernel...] The OKL4 version is available at our subversion repository and will be included in the upcoming release 9.05. For further information about building and using Genode on OKL4, please refer to the new [http:/community/wiki/GenodeOnOKL4 - Genode on OKL4 Wiki page...] Genode on 64-bit Linux kernels | 2009-04-17 ########################################### | Genode can now use both 32-bit as well as 64-bit versions of the Linux kernel | as base platform. From the ground up, Genode was co-developed supporting Linux and L4 as base platforms but the both versions were restricted to the 32-bit x86 architecture. We have now expanded the Linux support to 64 bit. Because most of the adaptions of Genode to 64 bit took place in generic code, we are now well prepared to support future 64-bit versions of L4 kernels as well. The patch for adding 64 bit support supplied by Christian Prochaska is now included in the current version of the Genode subversion repository. [http:/download/subversion-repository - Access the Genode subversion repository...] Christian Prochaska joins our project as regular developer | 2009-04-08 ####################################################################### | The developer of the Qt4 port for Genode joins Genode Labs to bring forward | his Genode-related projects. As the original developer of the Qt4 port for Genode, Christian Proachaska has gained long-time experience with running complex software on top of Genode. In the future, he will leverage his skills to further advance his Qt4-related work. Furthermore, he strives to improve the framework towards general-purpose computing. Currently, he is working on adding 64-bit support to Genode. Genode OS Framework release 9.02 | 2009-02-26 ############################################# | The version 9.02 of the Genode OS Framework introduces support for | L4ka::Pistachio as base platform, a port of the Qt4 application framework, | and networking. Whereas the focus of the previous release 8.11 was the refinement of Genode's base API and the creation of the infrastructure needed to build real-world applications, the new release 9.02 is focused on functional enhancements in two directions. The first direction is broadening the number of possible base platforms for the framework. At present, most microkernels bring along a custom user land, which is closely tied to the particular kernel. Our vision is to establish Genode as a common ground for developing applications, protocol stacks, and device drivers in such a way that the software becomes easily portable among different kernels. This release makes Genode available on the L4ka::Pistachio kernel. Hence, software developed with the Genode API can now run unmodified on Linux/x86, L4/Fiasco, and L4ka::Pistachio. In the second direction, we are steadily advancing the functionality available on top of Genode. With this release, we introduce a basic networking facility and support for native Qt4 applications as major new features. Thanks to Genode's portability, these features become automatically available on all supported base platforms. Read on about the new features described in the [http:/documentation/release-notes/9.02 - release notes...] [http:/download/latest-release - Download the Genode release 9.02...] Port of libSDL to Genode | 2009-01-23 ##################################### | As announced on the Genode mailing list, the popular Simple Directmedia | Library is being ported to Genode. A first version of the port and a demo | application are already available. The [http://www.libsdl.org - Simple Directmedia Layer library] (libSDL) is a very popular cross-platform media library that provides hardware abstractions for graphics, input devices, and sound. It is often used as back end for games, emulators, and media players. Also the Linux version of Genode relies on the hardware abstractions provided by libSDL. As [http://sourceforge.net/mailarchive/message.php?msg_id=21406424 - announced on the Genode mailing list], libSDL has been ported to Genode. At the current stage, the port supports the video subsystem and the input handling for mouse and keyboard. With libSDL now becoming available for Genode, it becomes much easier to make the wealth of libSDL-based applications available on our platform. [http://sourceforge.net/mailarchive/message.php?msg_id=21406424 - Read the announcement...] Genode on the L4ka::Pistachio kernel | 2008-12-18 ################################################# | The new L4ka::Pistachio version of the Genode OS Framework makes the unique | features, performance, and stability of the L4::Pistachio kernel available | for Genode's software stack. L4ka::Pistachio is the reference implementation of the L4 API version x.2 (also referred to as version 4). With the port of Genode to L4ka::Pistachio conducted by Julian Stecklina, this kernel has become available as a base platform for Genode. The choice of leveraging the special characteristics of L4ka::Pistachio, the Linux kernel, or L4/Fiasco has become just a matter of recompilation. This way, software written against the Genode API can benefit from the long-year research and development invested into L4ka::Pistachio by the L4ka group at the University of Karlsruhe and the DiSy group at the University of New South Wales. We have made the L4ka::Pistachio version of Genode available at our public subversion repository. It will become a regular part of Genode with the upcoming release as scheduled for February. The instructions for building and using Genode with the L4ka::Pistachio kernel are provided at our Genode-on-L4ka::Pistachio wiki page. [http:/community/wiki/GenodeOnL4kaPistachio">Learn more about Genode on L4ka::Pistachio...] Public bug tracker available | 2008-12-12 ######################################### | Because we received several requests for a public bug tracker, we have now | enabled the public tracker of our Sourceforge project. With the new bug tracker, we want to simplify the sharing and solving of issues related to Genode in a coordinated fashion. If you discover things you like to see improved in our code or documentation, please do not hesitate to share your experiences and ideas by posting a bug. [http:/community - Community resources...] Genode OS Framework release 8.11 | 2008-11-21 ############################################# | We are pleased to announce the release 8.11 of the Genode OS Framework | introducing a new device-driver API, a C runtime, support for asynchronous | notifications, and many improvements of the base API. With the new release 8.11, we are aiming at enabling Genode for real-world applications that require custom device drivers and the reuse of existing code.  Among the major improvements are a new device driver API that eases the reuse of existing device drivers and a C runtime that facilitates the reuse of a wealth of existing C library code on Genode. Furthermore, we extended the base API by a number of exciting feature such as support for asynchronous notifications, capability typification, and managed dataspaces. Learn more about all the new features and changes described in our comprehensive [http:/documentation/release-notes/8.11 - release notes...] [http:/download/latest-release - Download the release 8.11 of the Genode OS Framework...] Ready-to-boot Live-CD image available | 2008-10-21 ################################################## | As a teaser for the upcoming release 8.11, we have compiled a Live-CD image | showing off the current state of the Genode OS Framework. The Live CD features a fully graphical demonstration that presents the fundamental concepts of the Genode architecture in an interactive fashion. It runs directly on PC hardware and has been tested on Qemu and VirtualBox. [http:/download/live-cds - Download the Live-CD image...] New and exciting challenges ahead | 2008-09-19 ############################################## | To foster the involvement of developers interested in working on Genode, we | have enhanced the compilation of future challenges in our Wiki by a number of | interesting Genode-related projects to pursue. The Genode architecture inspires a large number of topics for research, experimentation, and development. The [http:/community/wiki/Challenges - challenges section of our Wiki] compiles a number of existing ideas. We have now enhanced this compilation by a number of further avenues that we find interesting to explore. For example, exploring Linux process containers, running Genode on FPGA platforms, dynamic linking support, de-privileging VESA, optimizing locking performance, and the port of libSDL. Maybe some of you find these topics as thrilling as we do? If yes, please feel welcome to pick up the ideas to start experimenting with Genode. The Genode build system thoroughly examined | 2008-08-22 ######################################################## | In his paper "Empirical Comparison of SCons and GNU Make", Ludwig Hähne | pursues the question of which build system to choose for an operating-system | project such as ours. For his study, he took the Genode build system as a | real-world use case. His results are not only valuable for our particular | project but for everyone with an interest in build systems. For the Genode OS Framework, we consider flexibility, usability, reliability, and scalability of the build infrastructure is crucial. When we started project, we created a custom build infrastructure with a particular focus on developer convenience. The effort already paid off for our daily work. The current implementation relies on GNU Make as back end but we are aware that there exist more modern approaches for building software, in particular there is SCons. In his paper, Ludwig Hähne used the Genode build system as a use case to compare SCons and GNU Make. He replicated our build system for the use of SCons as back end and conducted comprehensive experiments. The empirical results presented in the paper reveal a number of interesting issues, for example the limited scalability of the current Genode build system with regard to parallelism, and the memory consumption of SCons when used for large projects. [http://www.genode-labs.com/publications/scons-vs-make-2008.pdf - Download the PDF document...] Genode ported to Syllable Server OS | 2008-08-22 ################################################ | The developers of the Syllable OS project have ported Genode to the | Linux-based server version of Syllable OS. Syllable is a fully fledged free-software operating system that is mainly targeted at desktop computers. Thanks to its long-year steady development, there exists a large base of custom applications. As announced on the [http://development.syllable.org/pages/index.html - website of the Syllable OS project], Genode has been ported to the server version of Syllable OS. Kaj de Vos of the Syllable project also considers the incorporation of Genode into the desktop version of Syllable, which would be a very interesting synergy. Genode OS Framework release 8.08 | 2008-08-06 ############################################# | We released the first official version of the Genode OS Framework. The initial version of the Genode OS Framework is available for download. For naming our releases, we use the Ubuntu version-number scheme, which takes the year as the major number and the month as minor number. Hence, the release is called 8.08. It contains everything needed to execute an interactive graphical demonstration scenario on Linux via libSDL or alternatively via L4/Fiasco on bare PC hardware. [http:/download/latest-release - Download the latest release...] Project website launched | 2008-07-29 ##################################### | The launch of our comprehensive project website genode.org marks the begin of | our effort to turn Genode into a community project. The initial release of the | Genode OS framework is scheduled for the 6th of August. Today, we proudly launched the website of the Genode project [http://www.genode.org - http://www.genode.org]. This website is the central resource for people using or developing the Genode OS framework. It covers the latest news about our progress, architectural and technical documentation, a community-maintained wiki, mailing lists, information on accessing the source-code, and much more. We sincerely hope that this website will draw the attention of people who want bring forward the project together with us. We have scheduled the first official release of the Genode OS framework for the 6th August. Until then, we invite you to test-drive the beta-version of the framework as provided at the [http://www.genode.org/download - download]. Genode Labs founded | 2008-07-17 ################################ | The original authors of the Genode OS Framework start a company dedicated to | promoting and advancing Genode. At 15th of May, the two former PhD students of the TU Dresden Operating Systems group who developed the original vision behind the Genode architecture and who created the present implementation of the Genode OS Framework started their company Genode Labs. Genode Labs is committed to bring forward their novel OS technology as a community project and to facilitate its application to real-world problems.