Commit Graph

435 Commits

Author SHA1 Message Date
Emery Hemingway
6e9fa10e65 server/report_rom: partial ROM label matching
Fixes #1801
2015-12-17 10:38:18 +01:00
Christian Prochaska
23ff3b1877 nitpicker: fix focus change permission checks
Fixes #1816
2015-12-17 10:38:18 +01:00
Christian Helmuth
dc17e16897 signal: cleanup allocations / reset globals in test
I conserve these cleanups to enable the looped execution of all test
functions as I did to hunt a bug. The loop can easily be added to
main().
2015-12-10 13:17:11 +01:00
Christian Helmuth
e387d2098d demo: adapt nested nitpicker config 2015-12-10 13:16:27 +01:00
Christian Helmuth
2b321b9ce8 nitpicker: improve diagnostic of policy configuration
This patch adds diagnostic messages during the label-policy application,
if no policy for the session label was found or if the domain configured
in the policy node does not exist.
2015-12-10 13:16:27 +01:00
Martin Stein
01643ccd94 cpu_quota hw exynos5: raise error tolerance
From our observations we can tell that the error should not exceed 4%.
However, there is no reasonable explanation by now why the test results
are less stable on these platforms. We have tried several things that
did not lead to an explanation or improvement:

  * changing the timing parameters of the scheduler
  * switching off SMP
  * double-checking the speed of userland and kernel timers

Ref #1805
2015-12-10 13:16:26 +01:00
Martin Stein
227b539193 cpu_quota x86_64: fix RAM quota and stack size
The test threads previously used a stack size independent from the machine
word width. Qemu was previously configured to provide 64Mb of RAM which isn't
sufficient for x86_64.

Ref #1805
2015-12-10 13:16:26 +01:00
Martin Stein
a3a8978d77 cpu_quota zynq_qemu: raise error tolerance
On Qemu, the test results for Xilinx Zynq-7000 are less stable than usual.

Ref #1805
2015-12-10 13:16:26 +01:00
Martin Stein
6410bd7261 cpu_quota.run: more info and simpler calculations
Print result error and error tolerance per test result. Use TCL commands
'format' and 'abs'to simplify calculations in the conclusion part of the run
script.

Ref #1805
2015-12-10 13:16:26 +01:00
Emery Hemingway
cffa4fddec util/xml_node.h: mark for_each_node const
Issue #1801
2015-12-10 13:16:24 +01:00
Sebastian Sumpf
6a186f6ed0 packet_stream: implement peek_packet function
issue #1800
2015-12-01 15:12:11 +01:00
Emery Hemingway
d0ebdfba4b server/fs_log: merge labels using 'label_prefix'
Policies are no longer partially matched against 'label' attributes.
New test at run/fs_log.

Issue #1766
2015-11-29 18:17:09 +01:00
Josef Söntgen
627ecc44d2 Revert "os: reset Audio_out stream prior to calling start"
This reverts commit d8b95c263b.

Some clients might want to fiddle with the clients play position
(e.g. the mixer) within 'Audio_out::start()' and we might reset
it to an old value if we do it afterwards.

Fixes #1796.
2015-11-29 18:17:09 +01:00
Josef Söntgen
6d1e417250 os: reset one packet further in Audio_out stream
Since all Audio_out server components loop over the packet stream
queue it is save to reset the tail position to one after the play
position. We have to do this because we do not know exactly when
the play position changes (i.e. the driver has processed the packet)
and we might end up with a tail position before the current play
position.

Issue #1796.
2015-11-29 18:17:09 +01:00
Josef Söntgen
08ae942d72 mixer: more relaxed config handling
Instead of bailing out if the channel list is incorrect check config
node attributes and default settings first.

Being there also fix flawed LOG messages.

Fixes #1794.
2015-11-29 18:17:08 +01:00
Christian Helmuth
dd96cba415 part_blk: increase entrypoint stack size
The changed policy-matching utility uses session labels etc. on stack
which increases the size demand.
2015-11-29 18:17:08 +01:00
Johannes Schlatow
50c809dfe5 os: remove deprecated os/run/network_test_nic*
The network_test_nic tests seem to be outdated. They don't work anymore for
several reasons.

Ref #1667
2015-11-29 18:17:08 +01:00
Johannes Schlatow
2b1a70d66d nic: replace Nic driver interface in the zynq network driver
Ref #1667
2015-11-29 18:17:07 +01:00
Timo Wischer
9f4b77c5c2 nic: support Zynq-7000
Ref #1667
2015-11-29 18:17:07 +01:00
Emery Hemingway
20dc750d6a Update run scenarios for policy label matching
Issue #1766
2015-11-29 18:17:06 +01:00
Norman Feske
3f6ff39d76 os: improved label matching
This patch unifies the mechanism of selecting server-side policies and
taking session-routing decisions based on session labels. In both cases,
XML nodes are scored against session labels. The score depends on the
XML attributes 'label' (exact match), 'label_prefix', and
'label_suffix'.

Issue #1766
2015-11-29 18:17:05 +01:00
Emery Hemingway
ee25dcbae3 VFS: check path on the symlink node readlink
Fixes #1790
2015-11-29 18:17:05 +01:00
Emery Hemingway
44cfc414ee VFS server: throw Not_empty
Issue #1750
2015-11-29 18:17:05 +01:00
Emery Hemingway
1d92631ef0 VFS, File_system: Not_empty
Unlink returns an error for non-empty directories when the backend does
not support recursive unlinking.

Fixes #1750
2015-11-29 18:17:05 +01:00
Emery Hemingway
6cb0f3bb71 VFS ram: remove quota
Fixes #1780
2015-11-29 18:17:05 +01:00
Christian Prochaska
25643fa00a init: fix uninitialized variables
Fixes #1753
2015-11-29 18:17:04 +01:00
Christian Helmuth
d46ad98434 clipboard: check validity of import rom before usage
The attached ROM dataspace may be not yet valid on the first update (or
at any time beyond this explicit test case).
2015-11-29 18:17:04 +01:00
Josef Söntgen
e13971fcf0 xml_generator: add attribute String<N> method
Make it possible to directly pass on a Genode::String<N> object instead
of using Genode::String<N>.string() by hand.

Fixes #1783.
2015-11-29 18:17:04 +01:00
Martin Stein
59d2a83f30 TZ VMM & USB Armory: Demo
* Provide paravirtualized block API for accessing the second partition
  of the block device that is provided by the ESDHC driver.

* Provide paravirtualized serial API for sending log-output over Genodes
  serial port.

* Use the latest Linux suggested in the USB Armory Wiki [1] when on USB Armory
  while still using the older vendor Linux when on i.MX53 QSB. I.e.,
  provide a device tree through RAM and a rootfs through the paravirtualized
  block device when on USB Armory while providing ATAGs and Initrd when on
  i.MX53 QSB.

* Switch on the LED on the USB Armory when the VMM catches a VM-exception
  and switch it off again when as soon as the exception is handled. This
  merely show-cases the ability to instrument the LED for such purposes. In an
  ideal world, the LED is switched on as long as we're on the "Secure Side"
  and switched off as long as we're not.

* For further information see repos/os/run/tz_vmm.run

[1] https://github.com/inversepath/usbarmory/wiki/Preparing-a-bootable-microSD-image

Fixes #1497
2015-11-29 18:17:04 +01:00
Martin Stein
8c22e5d535 sd_card & imx53: refactor and clean-up
Move ADMA2 stuff to extra header and unit. Move ESDHCv2 implementations to
extra unit. Use exceptions instead of error codes. Clean-up documentation.

Ref #1497
2015-11-29 18:17:03 +01:00
Martin Stein
9da422696b sd_card & imx53: set ADMA entry size more clean
Less heuristics.

Ref #1497
2015-11-29 18:17:03 +01:00
Martin Stein
a08358dce9 sd_card & imx53: fix multiblock write termination
The manual termination of multi-block writes via "Stop Transmission" commands
seems to leave the card in a busy state sometimes. This causes errors on
subsequent commands. Thus, we have to synchronize manually with the
card-internal state via "Send State" commands. Additionally, the method
for issuing the manual "Stop Transmission" commands was refined.

Ref #1497
2015-11-29 18:17:03 +01:00
Martin Stein
2b021ec54b sd_card & imx53: simplify IRQ handler
Less switch cases.

Ref #1497
2015-11-29 18:17:03 +01:00
Martin Stein
48e7d29686 sd_card & imx53: flush ADMA2 writes via DSB
We have to issue a data synchronization barrier after writing a ADMA2
table to ensure that the corresponding write commands were actually
executed before issuing the SD command.

Ref #1497
2015-11-29 18:17:03 +01:00
Martin Stein
bd7fe4160d sd_card & imx53: fix initialization problem on QSB
On i.MX53 QSB, a "Send Op Cond" command during the driver initialization
returns another response value than on the USB Armory. As the check for
this response seems to have no relevance for the driver functionality (Linux
reads the value from MMIO but I can't find a place in the source code where
it is used), we simply remove it.

Ref #1497
2015-11-29 18:17:02 +01:00
Martin Stein
d8e91908a2 sd_card & imx53: install IRQ signal handler
Previously, it was not necessary to acknowledge an IRQ initially before using
it. However, since the IRQ framework changed lately it is. Adapt to this.

Ref #1497
2015-11-29 18:17:02 +01:00
Alexander Boettcher
92cb9eb06d x86: support dynamic upgrades for platform driver
and, especially, for the device_pd. Account all resources per platform session
separately.

Fixes #1539
2015-11-29 18:17:02 +01:00
Alexander Boettcher
4c4e7c64d0 x86: start per platform session separate device_pd
Issue #1539
2015-11-27 12:18:54 +01:00
Alexander Boettcher
b902f42482 os: support reference ram cap for slaves
Issue #1539
2015-11-27 12:18:54 +01:00
Christian Helmuth
50dd0dda38 Notify report-rom client on signal-handler registration
Notify client initially to enforce a client-side ROM update. Otherwise,
a server-side ROM update between session creation and signal-handler
registration would go unnoticed.

Issue #1788
2015-11-27 12:18:54 +01:00
Norman Feske
f9d0e57b0e decorator: fix hover detection 2015-11-27 12:18:53 +01:00
Norman Feske
e4678a4dc1 decorator: do not defer stacking changes
This patch changes the decorator to always apply stacking-order changes
immediately instead of deferring the re-stacking of the nitpicker views
to the next call of 'update_nitpicker_views'. The deferred application
did not always work when more then one windows changed their stacking
position at once because the cached '_neighbor' values interfered with
each other.

The eager re-stacking should not have negative effects on the user
experience because, in contrast to re-positioning, re-stacking a rare
operation.
2015-11-27 12:18:53 +01:00
Norman Feske
acb0ddd9ef decorator: generalize include/decorator/window.h
This change makes it possible to reuse the generic window decorator
classes in include/decorator/ for decorators of a different structure.
E.g., instead of painting decorations on a single nitpicker session,
each window may paint its decorations into additional window-specific
nitpicker sessions.
2015-11-27 12:18:53 +01:00
Norman Feske
0ab49dff3a nitpicker: reflect Handle_registry::Out_of_memory
In the event where a nitpicker session's quota was depleted by the
allocation of view handles, nitpicker would abort. The patch prevents
the abort by reflecting this condition as an Out_of_metadata exception
to the client. This way, the client can upgrade its session as needed.

The problem was triggered by running the decorator_stress test (changed
to generate 40 windows) with the themed_decorator.
2015-11-27 12:18:52 +01:00
Norman Feske
a1c0c99045 nitpicker: fix corner case in view stack operation
This patch addresses the corner case that the specified neighbor view
is the first view of the view stack. If this is the case when inserting
the view in front of the neighbor (behind == false), the target position
within the view stack must be a null pointer, not the first view.

Because the conditions have become rather complicated, both cases
of 'behind' are handled separately now.
2015-11-27 12:18:52 +01:00
Norman Feske
909c4c9ffc os: define storage type of rgb888 as 32-bit value
The original version used unsigned long as storage type, which wasted
memory on 64-bit machines.
2015-11-27 12:18:52 +01:00
Norman Feske
853378960c init: prevent division by zero
During the reconfiguration of init, the CPU-quota computation caused
init to produce a division-by-zero exception.
2015-11-27 12:18:52 +01:00
Norman Feske
331225dfcb Increase TRACE quota of trace subject reporter
This change is needed to accommodate the turmvilla scenario.
2015-11-27 12:18:52 +01:00
Norman Feske
23aac2954b rom_filter: respond to dynamic config updates 2015-11-27 12:18:51 +01:00
Alexander Boettcher
2b6795df78 ps2: support verbose config parameter
Fixes #7
2015-11-27 12:18:51 +01:00