Commit Graph

270 Commits

Author SHA1 Message Date
Christian Helmuth
958bf4d903 run: successful-boot detection string for sel4 2016-03-07 12:34:43 +01:00
Martin Stein
ff10687a6c toolchain: report missing ports at once
Previously, ports that were needed for a scenario and that were not
prepared or outdated, triggered one assertion each during the second
build stage. The commit slots a mechanism in ahead that gathers all
these ports during the first build stage and reports them in form of a
list before the second build stage is entered.  This list can be used
directly as argument for tool/ports/prepare_port to prepare respectively
update the ports. If, however, this mechanism is not available, for
example because a target is build without the first build stage, the old
assertion still prevents the target from running into troubles with a
missing port.

Fixes #1872
2016-03-07 12:34:43 +01:00
Martin Stein
992a5ec1ae prepare_port: prefix git clone output
To raise readability when preparing multiple ports in parallel we prefix
also the git clone output with the port name dark-yellow-coloured. To
achieve this we sed the git output. In sed \x1b[ resolves to an escape
sequence and \033[, that we use normally, doesn't. The echo command, at
the other hand, resolves both to an escape sequence. Thus we use the
sed-compatible version in general. This commit inhibits the progress
output of git clone as it can't be redirected to sed.

Ref #1872
2016-03-07 12:34:43 +01:00
Martin Stein
b039608e95 prepare_port: prepare multiple ports at once
The tool/prepare_port tool is now able to handle a list of ports that
shall be prepared. Additionally, one may state the number of ports that
shall be prepared in parallel at a max by using the -j parameter. If -j
is not set by the user, the tool acts as with -j1. The previous
implementation of the tool that prepares only a single port was moved to
tool/ports/mk/prepare_single_port.mk and acts as back end to the new
prepare_port tool. The interface of the new prepare_port tool is
backwards compatible. When called for one port only, the behavior is the
same as when calling tool/ports/mk/prepare_single_port.mk directly.

Removes "usage" rule from prepare_single_port.mk. Removes shebang line
from prepare_single_port.mk.

Ref #1872
2016-03-07 12:34:43 +01:00
Reto Buerki
f1d2d7251d hw_x86_64_muen: Include static ACPI report ROM
Enable the ACPI functionality in the platform_drv on hw_x86_64_muen and
provide a simple generated XML report as ROM session in order to make
the PCI configuration space available.

This is a requirement to implement support for MSI on hw_x86_64_muen.
2016-02-26 11:36:53 +01:00
Reto Buerki
ac478081c3 Update hw_x86_64_muen build.conf template 2016-02-26 11:36:53 +01:00
Sebastian Sumpf
ac70dfd9fe riscv: run tool support for spike
issue #1880
2016-02-26 11:36:51 +01:00
Sebastian Sumpf
8c6e3c6251 riscv: create_builddir support
issue #1880
2016-02-26 11:36:50 +01:00
Sebastian Sumpf
8cddd86a4c riscv: tool chain
issue #1880
2016-02-16 14:38:02 +01:00
Alexander Boettcher
bc70d67ee7 run: check for mis-configured Intel ME/AMT SOL
and show hint about how to enable it.

Fixes #1876
2016-02-05 10:49:30 +01:00
Adrian-Ken Rueegsegger
316134caf8 run: Add iPXE support to hw 2016-01-08 14:37:57 +01:00
Adrian-Ken Rueegsegger
fcde1d668c hw_x86_64_muen: Extend build.conf with image/muen params
Enable automatic build of Muen system image by adding the image/muen run
script to RUN_OPT. Also specify --image-muen parameters with explanatory
comments.

Note: The ISO image is not built by default anymore.
2016-01-08 14:37:56 +01:00
Adrian-Ken Rueegsegger
bffddd7e15 tool: Extend hw boot_dir script to support Muen SK build 2016-01-08 14:37:56 +01:00
Adrian-Ken Rueegsegger
aefacc9310 run: Add image/muen script to support Muen SK build
The script takes the following RUN_OPT parameters:

--image-muen-external-build  Muen system is built automatically or externally
--image-muen-system          Muen system policy
--image-muen-components      Muen system components
--image-muen-hardware        Muen hardware platform
--image-muen-gnat-path       Path to GNAT toolchain
--image-muen-spark-path      Path to SPARK toolchain
2016-01-08 14:37:56 +01:00
Adrian-Ken Rueegsegger
d3a4ed87d1 hw_x86_64_muen: Drop QEMU related RUN_OPTS
This platform does not support execution on QEMU.
2015-12-21 09:35:23 +01:00
Adrian-Ken Rueegsegger
a98b94f80e run: Pass AMT log password via environment variable
This avoids exposing the cleartext AMT password in the log output.
2015-12-21 09:35:23 +01:00
Adrian-Ken Rueegsegger
184bffbce3 run: Add filter support to AMT log
Add --log-amt-filter option which allows to sanitize the AMT log output by
piping it through a filter.
2015-12-21 09:35:23 +01:00
Christian Prochaska
2c558de891 vbox: 64-bit guest support
Fixes #1791
2015-11-29 18:17:06 +01:00
Martin Stein
0b39b22e14 create_uboot: support for hw_usb_armory
The platform name 'hw_usb_armory' targets Genode scenarios with base-hw
as kernel and the Inversepath USB-Armory as target hardware.

Ref #1497
2015-11-29 18:17:03 +01:00
Martin Stein
640b73f5ec create_uboot: spare out first 1K of target medium
This enables installation of the bootloader image without wiping the
partition table which is needed at least for the tz_vmm tutorial with
hw_usb_armory.

Ref #1497
2015-11-29 18:17:03 +01:00
Alexander Boettcher
826c81ac18 hw_x86: discover all physical memory in core
Fixes #1741
2015-11-04 14:09:28 +01:00
Emery Hemingway
b6c558dce9 Vfs: File_system server backed by VFS library
Test available at libc_vfs_fs.

Fixes #1648
2015-11-04 14:09:24 +01:00
Christian Prochaska
b26ac3c4fb run: fix Qemu boot timeout
Fixes #1758
2015-11-03 17:02:19 +01:00
Alexander Boettcher
115a605658 run: try to detect reboots of platform 2015-10-28 15:06:24 +01:00
Alexander Boettcher
6d0936ca98 okl4: increase available physical memory
required by noux_tool_chain_auto
2015-10-28 15:06:23 +01:00
Alexander Boettcher
24e65e2e39 nova: don't unzip images with grub
Causes trouble if a gz image is loaded via grub and later used as initrd for a
Linux VM (e.g. with Seoul VMM)

Discovered during Turmvilla scenario #1552 and issue #1733.
2015-10-09 16:38:47 +02:00
Martin Stein
2d9d55a6d3 tool: create_uboot
To make the creation of a bootstrap medium for most ARM platforms more
comfortable this tool shall bundle all the different U-Boot source
states, patches, and MMC preparation rules that we gathered over the
year for that purpose. As input, the tool merely needs the targeted
platform (analogous to the platform parameter of 'create_builddir'). By
now, 'hw_wand_quad' is the only supported platform. Further platforms
can be added successively. As output, the tool creates a head image file
of small size (8MiB) that can be copied (dd) with offset 0 to the MMC.

Fixes #1730
2015-10-09 16:36:30 +02:00
Norman Feske
aaea28ae85 Fix build and execution of test/sel4 2015-10-06 12:18:56 +02:00
Norman Feske
e77df44ed5 Add rom_filter and clipboard tests to autopilot 2015-10-06 12:18:56 +02:00
Norman Feske
ffd48e3f83 run: strip NOVA kernel 2015-10-06 12:18:51 +02:00
Adrian-Ken Rueegsegger
8eec092851 Add support for ipxe load (nova, foc, fiasco)
This makes use of the iPXE sanboot command [1] which downloads and
boots an ISO image directly via HTTP. Therefore, your RUN_OPT needs
both

  --include image/iso   and
  --include load/ipxe

NOTE: The webserver serving the ISO image must support ranged requests,
      see [2].

[1] - http://ipxe.org/cmd/sanboot
[2] - http://forum.ipxe.org/showthread.php?tid=7295&pid=10482#pid10482
2015-09-30 12:20:40 +02:00
Adrian-Ken Rueegsegger
94afc1a340 run: support loading images via iPXE/HTTP
iPXE is an open source network boot firmware which supports booting from
a web server via HTTP [1].

The following two parameters can be used to specify the iPXE/HTTP setup:

--load-ipxe-base-dir
  This parameter specifies the base directory of the HTTP server from
  which the target machine downloads the files.

--load-ipxe-boot-dir
  The directory relative to iPXE base dir which contains the iPXE
  chainload configuration and all necessary files.

The target machine is expected to request the following iPXE
configuration via HTTP:

http://${HOST_URL}/${ipxe-boot-dir}/boot.cfg

This can be achieved by building iPXE with the following embedded
script:

  #!ipxe
  dhcp
  chain http://${HOST_URL}/${ipxe-boot-dir}/boot.cfg

See also [2] for additional information.

[1] - http://ipxe.org/
[2] - http://ipxe.org/howto/chainloading#breaking_the_loop_with_an_embedded_script

Fixes #1708
2015-09-30 12:20:40 +02:00
Alexander Boettcher
9b21c88bc6 base: handle unsupported printf commands better
The commit consumes the argument of a unsupported printf command.

Without the commit - a subsequent command uses the argument of the preceding
command, which may cause memory corruption or page faults for sequences using
string commands, e.g.

Genode::printf("%#x %s\n", 0x20, "Test");

'#' is not supported by Genode::printf. In this scenario a pagefault at
address 0x20 is caused.

Fixes #1701
2015-09-30 12:20:38 +02:00
Stefan Kalkowski
ed52d5a211 Introduce 'spec' subdirectories to outline aspects
Instead of holding SPEC-variable dependent files and directories inline
within the repository structure, move them into 'spec' subdirectories
at the corresponding levels, e.g.:

  repos/base/include/spec
  repos/base/mk/spec
  repos/base/lib/mk/spec
  repos/base/src/core/spec
  ...

Moreover, this commit removes the 'platform' directories. That term was
used in an overloaded sense. All SPEC-relative 'platform' directories are
now named 'spec'. Other files, like for instance those related to the
kernel/architecture specific startup library, where moved from 'platform'
directories to explicit, more meaningful places like e.g.: 'src/lib/startup'.

Fix #1673
2015-09-16 13:58:50 +02:00
Christian Helmuth
ebd0796fc0 run: plugin for Gembird EnerGenie powerplug
The plugin works just like the netio plugin and uses the following
parameters

  --power-off-energenie-host       network address of device
  --power-off-energenie-password   password for device
  --power-off-energenie-port       target port of device
2015-09-09 15:14:30 +02:00
Christian Helmuth
539e5212ab run: rename powerplug to netio
The run plugin is not generic and works for NETIO4/NETIO230 powerplugs
only. Further, this opens the path for other vendor-specific powerplug
plugins.

Note, the plugin parameter for the addressed powerplug was renamed to

  --power-on-netio-host  resp.
  --power-off-netio-host
2015-09-09 15:14:30 +02:00
Stefan Kalkowski
acc46f70b7 codezero: remove support from Genode (fix #1668) 2015-09-09 15:14:29 +02:00
Johannes Schlatow
40b31876d2 base-hw: Add basic Zynq-7000 support (QEMU)
Ref #1599
2015-09-09 15:14:28 +02:00
Christian Helmuth
ae43d13b90 Remove always_hybrid spec
With always_hybrid also the lx_hybrid_x86 platform in
tool/create_builddir vanishes.

Fixes #1619
2015-09-09 15:14:27 +02:00
Stefan Kalkowski
9f1beaa036 hw_x86_64: use 'muen' SPEC to implement aspect 2015-08-31 09:09:22 +02:00
Reto Buerki
11bfbb3532 run: Use raw binary object for base-hw on Muen 2015-08-27 13:48:25 +02:00
Reto Buerki
dcd20f1566 hw: skeleton for building x86_64_muen
The hw_x86_64_muen platform is a x86/64 base-hw kernel which runs as
isolated subject (guest) on the Muen Separation Kernel (SK) [1].

The platform is implemented as an extension to hw_x86_64 replacing the
PIC and timer drivers with paravirtualized variants. The skeleton
contains a dummy PIC and timer implementation for now.

[1] - http://muen.sk
2015-08-27 13:48:24 +02:00
Reto Buerki
3420cc0b71 Add hw_x86_64_muen to create_builddir tool 2015-08-27 12:36:15 +02:00
Christian Helmuth
e2f2ac567e report_rom: deny requests for existing reports
If a requested report already exists the request is denied with
Invalid_args.

Further, I dusted the report_rom test and added it to the
autopilot list.
2015-08-21 11:00:58 +02:00
Christian Helmuth
5514671630 Improve error message on wrong tool chain (fix #1642)
Following the proposal of @jameysharp.
2015-08-21 10:59:45 +02:00
Alexander Boettcher
df662cc2f3 nova: use kernel branch with quota handling
Fixes #1601
2015-08-21 10:59:45 +02:00
Martin Stein
b60f28bee9 run/load/tftp: detect bad directory
If a user has e.g. /tftpboot/x86 as directory and configures
base_dir=/tftboot and offset_dir=/x86, this leads to bad behavior
as the load module creates a symlink

/tftpboot/x86/<builddir> -> <absolut_builddir>

in this case instead of the desired

/tftpboot/x86 -> <absolut_builddir>

Furthermore, the module works on

/tftpboot/x86/config-00-00-00-00-00-00

and

/tftpboot/x86/<builddir>/config-00-00-00-00-00-00

afterwards, which looks bad too. As there is no warning at all, this can
be hard to debug. The commit adds an appropriate check with error message and
exit -1 on an existing directory.

Fixes #1630
2015-07-21 09:38:10 +02:00
Christian Helmuth
ce43ed4c17 hw: load bender before kernel on grub too 2015-07-21 09:30:11 +02:00
Christian Helmuth
bc827787f4 bender: unconditionally relocate all boot modules
If just one multiboot kernel module was loaded after bender, the
relocation was skipped before. This resulted in a corrupt binary image
on ELF loading if the regions of the boot module and the final program
overlap. Now, all modules are copied below 2 GiB (and out of the way)
before ELF loading.

Fixes #1624

Bender upstream issue is TUD-OS/morbo#4
2015-07-21 09:30:11 +02:00
Alexy Gallardo Segura
c14fe7e6c7 foc: Odroid-X2 basic support
Fix #1597
2015-07-21 09:28:25 +02:00