When re-configuring the NIC router, determine for each domain if at least one
interface stays with the domain. If a domain fullfills this and has a
dynamic IP config (received via a DHCP client), keep the IP config.
To achieve this, the following changes have been made to the existing NIC
router code:
* Split-up Interface::handle_config into three steps:
1) Determine for each interface if its domain can keep its IP config or
or if it has to mark it invalid. This must be done before (re-)attaching
any interface because during "attach" several decisions are made based on
the validity of the IP config of corresponding the domain.
(E.g. whether to participate in sending DHCP DISCOVERs {IP config
invalid} or whether to participate in sending pending ARP REQUESTs
{IP config valid} ).
2) Detach, attach, or re-attach each interface according to the
configuration. This must be done before re-considering the temporary
state objects of each interface because the latter might have effects
on the interfaces of remote domains which must then be in place already.
3) Re-consider temporary state objects of each interface. (E.g. transport
layer connection states)
* Re-work IP-config setter in a way that it works as follows:
1) If the old IP config is valid, let all local interfaces as well as remote
interfaces that depend on the IP config of the domain detach from the old
IP config.
2) Overwrite with new IP config
3) If the new IP config is valid, let all local interfaces as well as remote
interfaces that depend on the IP config of the domain attach to the new
IP config.
Issue #2815
The new attribute config.domain.label has effect only at the uplink
domain-tag. It determines which label the NIC router shall use when
requesting the NIC session for the uplink domain. If value of this
attribute changes at the uplink domain-tag, the NIC router closes and
re-requests the NIC session of the uplink with the new label.
Issue #2815
This tests the case that behind a NIC router domain there are not only
directly connected clients of the subnet but also Layer 2 indirections like
a switch or a bridge which might be interesting for example for testing the
NIC routers DHCP server implementation.
Fixes#2837
Set DHCP-DISCOVER retry timeout and DHCP-REQUEST retry timeout from 10
seconds to 2 seconds. This prevents problems with tests where the NIC
driver comes up slowly and the first packets of the DHCP client get
dropped.
Issue #2837
The Ethernet destination MAC address of a DHCP reply is not the same as the
DHCP client MAC address. The DHCP server of the NIC router did not take care
of this by now.
Issue #2837
When an environment session is provided by a async service such as a
sibling component, the session metadata must be preserved until end of
the lifetime of the session at the server has been acknowledged by the
server. Since the session meta data of env sessions are always part of
the 'Child' object, the destruction of this object must be deferred
until this point.
Merge the 'Packet_handle' into the 'Rom_root' and use an Id_space to
match File_system handles to session objects rather than a list. This
avoids the need to override 'Root_component::_destroy_session'.
Fix#2833
When exhausted of RAM quota while starting children, init used to throw
an uncaught 'Out_of_ram' exception as this condition was considered
fatal. However, this behavior is undesired when init is used in a highly
dynamic yet long-running fashion like sculpt's runtime subsystem. This
change keeps init running despite the error condition, giving the user
the chance to relieve the resource pressure.
The 'View_stack::draw_rec' method limited the redraw to parts of the
view that were explicitly marked as dirty. This does not produce the
desired result when stacking multiple transparent views. Here, the
background views must be drawn regardless of whether they are marked as
dirty or not.
The file may also be changed by other components, so a open-close cycle
for write() is more robust. For example, Vim removes the original file
and recreates with the new content.
The '_active_mode' must not be changed at any time except when the
client asks for the 'Framebuffer::mode'. Otherwise, the dimensions of
dataspace used by the client is not always consistent with the mode
information as gathered by the client.
On real hardware, the tests expect an IPv4 subnet such that UDP requests
to 10.0.0.2 port 12345 get answered with an ICMP destination port unreachable.
Issue #2775
support USB NIC
Issue #2788
Set DHCP discover timeout to 1 second because, for some reason, the first
DHCP discover attempt of the NIC router on the PandaBoard times out with the
nightly test infrastructure.
Issue #2788
Adaption to mac-address allocation changes
Normally, the NIC sessions are independent from the domain tags.
However, by now the uplink session, in contrast to the sessions of the
other domains, is still not a server but a client. This means that only
the NIC router itself can decide when to open and close uplink sessions
and how many. Thus, with this commit, we break with the pattern that
session lifetime is independent from domains by letting the NIC router
create the uplink session when the uplink domain appears and close the
session when the domain disappears.
Fixes#2795
Since the router MAC is allocated like the donwlink MACs it can't happen
anymore that these MACs clash, for instance due to nested routers. Thus,
the range of the MAC allocators of nested routers must not be exclusive
anymore which deprecates the 'mac_first' configuration attribute.
Issue #2795
Allocate a virtual MAC address at runtime that is used as router
Ethernet-identity for all downlink domains. This makes the downlink
domains independent from the uplink session.
Issue #2795
The old MAC allocator had several drawbacks:
* the address base was a public static that could and must have been written
directly from outside the class
* the in-use-flag array was based on unsigned values consuming 4 bytes each
for only one bit of information
* it was a public header that we actually don't want to expose to all
components but only to the few networking components
* it used the not-so-safe bit notation for integer members of GCC
The new version fixes all these drawbacks.
Issue #2795
Instead of handing over the maximum available size to the packet data
accessors, hand over a size guard that keeps track of the packets
boundaries.
This commit also moves the size-guard utilitiy header of Ping and NIC
Router to the include/net directory making it a part of the net library.
It applies the new approach to all net-lib users in the basic repositories.
Ping looses its configurability regarding the ICMP data size as this would
require an additional method in the size guard which would be used only by
Ping.
The size guard was also re-worked to fit the fact that a packet can
bring a tail as well as a header (Ethernet).
Issue #2788
For now it is enough to differentiate the most commonly used file
system on Genode, e.g. Ext2 for the Genode partition and FAT32 for
(U)EFI partitions.
Issue #2803.
The component will now always try to parse the MBR as well as the GPT
(in this order). It will bail out if both are considered valid, using
GPT/MBR hybrid tables is not supported.
Fixes#2803.
The Ethernet payload may be followed by padding of variable length and
the FCS (Frame Check Sequence). Thus, we should consider the value
"Ethernet-frame size minus Ethernet-header size" to be only the maximum
size of the encapsulated IP packet. But until now, we considered it to
be also the actual size of the encapsulated IP packet. This commit fixes
the problem for all affected components of the Genode base-repository.
Fixes#2775
This reduces the redundant implementations of checksum calculation to
one generic implementation, makes the checksum interface conform over
all protocols, and brings performance optimizations. For instance,
the checksum is now calculated directly in big endian which saves us
most of the previously done byte-re-ordering.
Issue #2775
Replace packet method 'T *data' by the new methods 'T &reinterpret_data'
for parsing or modifying existing sub-protocol packets and 'T
&construct_at_data' for composing a new sub-protocol packet. This has
the advantage that, when composing a new packet, the default constructor
that zero-fills the packet is always called first.
Fixes#2751
This commit changes the 'Input::Event' type to be more safe and to
deliver symbolic character information along with press events.
Issue #2761Fixes#2786
On the Raspberry PI, the 2 seconds of round time in the polling test
were not sufficient to reach the goal of at least 1000 successful polls.
Thus, the commit sets the round time to 2.5 seconds which doesn't hurt to
much but allows the RPI to just make it.
Fixes#2779
This patch largely reverts the feature of selecting parts of input nodes
from within the output node (as originally introduced by commit
7263cae5a18b4f1f2293d031f9bafcf05ba51146). The selection of content
should be consistently performed by input nodes instead. The principle
ability of copying input nodes verbatim into the output stays available.
Issue #2691
The new 'attribute' and 'value' attributes of input nodes
can be used to select input sub nodes that match the presence and value
of the specified attribute.
Issue #2691
This patch replaces the terminal's formerly built-in fonts with the new
VFS-based font handling.
To avoid the copying of the terminal's font configuration across run
scripts, this patch adds the new terminal/pkg runtime package, which
includes everything needed for instantiating a terminal: the actual
terminal component, the library dependencies (vfs_ttf, which in turn
depends on the libc), a font (bitstream-vera), and a reasonable default
configuration.
Fixes#2758
The 'stat' method is called for all paths, not just the specific file
system node of the ROM module. The ROM update is needed only in the
latter case.
Otherwise, when always updating the ROM on stat, stat calls on the VFS
become very expensive in the presence of a mounted ROM module if the ROM
is obtained from fs_rom (which re-watches the file and all its
individual path elements whenever the 'update' RPC function is called).
Reduce the size and forward compatibility of VFS file-system
constructors by passing an object holding accessors for 'Genode::Env',
'Genode::Allocator', response handlers, and the root file-system.
Fix#2742
When working with GPIO interrupts on i.MX6SX for Ethernet PHYs
it became obvious that the GPIO driver repeatedly receives interrupts
for the same event, because it acknowledges the interrupt before a
client has handled the event.
Ref #2750
This driver component provides support for using consumer NVMe storage
devices, i.e. it omits name space managment and will always use the
first name space, on Genode. For now it defaults to a reasonable low
configuration:
- 1 I/O queue (completion/submission tuple)
- 128 entries in the I/O queue
- 4096 as the only I/O transaction memory page size
Fixes#2747.
The 'default' attribute is useful to change the default value for those
protocol attributes that are not explicitely set in the configuration of
the component.
Issue #2738
Each supported protocol now has an attribute with the name of the protocol in
the config tag. Each of these attributes accepts one of four possible values:
* no - do not print out this protocol
* name - print only the protocol name
* default - print a short summary of the most important header values
* all - print all available header values
Example:
! <config eth="name"
! arp="all"
! ipv4="default"
! dhcp="no"
! icmp="all"
! udp="no"
! tcp="default"
! ... />
Corresponding output example:
! ETH IPV4 10.0.2.212 > 10.0.2.55 time 7158 ms (Δ 11 ms)
! ETH IPV4 10.0.2.55 > 10.0.2.201 TCP 80 > 49154 flags ' time 6976 ms (Δ 5 ms)
! ETH ARP hw 1 prot 2048 hwsz 6 protsz 4 op 1 srcmac 02:02:02:02:02:01 srcip 10.0.2.212 dstmac 00:00:00:00:00:00 dstip 10.0.2.55 time 7074 ms (Δ 98 ms)
Issue #2738
Nitpicker's 'Session:focus' call used to trigger a one-off focus change
at call time. This focus change did not pass the same code paths as a
focus change triggered by a "focus" ROM update, which led to
inconsistencies.
This patch changes the implementation of 'Session::focus' such that the
relationship of the caller and the focused session is preserved after
call time. Whenever the calling session is focused in the future, the
specified session will receive the focus instead. So 'Session::focus'
represents no longer a single operation but propagates the information
about the inter-session relationship. This information is taken into
account whenever the focus is evaluated regardless of how the change is
triggered.
This makes the focus handling in scenarios like the window manager more
robust.
Issue #2746
Relative motion events with a motion vector of (0,0) should not exists.
They cause jittery movements of nitpicker's pointer position. This
patch filters out such events.
This tests ping with simple IP forwarding, ping with NAPT as well as
forwarding of ICMP "Destination Unreachable" messages through the NIC
router.
Issue #2732
The 'ping' component continuously sends ICMP Echo requests to a given IP host
and waits for the corresponding ICMP Echo replies. For each successfull ICMP
Echo handshake it prints a short statistic. By now, it can be used only with a
static IP configuration. The size of the ICMP data field can be configured. It
gets filled with the letters of the alphabet ('a' to 'z') repeatedly.
Issue #2732
Originally, the timeout framework caused deadlocks when acquiring the same
lock from different timeout handlers. This use case is now tested in the
timeout test.
Fixes#2704
To handle all pending timeouts in the context of scheduling a timeout
was only necessary because the Timeout framework once made use of the
Alarm framework. The method Alarm_scheduler::schedule_absolute took an
absolute deadline as argument and we couldn't change this beause the
Alarm framework was also used without the Timeout framework. We had to
calculate this absolute deadline with the now time of the Timeout
framework but the Alarm framework has its own now time that is always a
bit behind the one of the Timeout framework. This lead to bad decisisons
when finding the right position for the new timeout. Now, we can call
schedule_absolute with a relative duration and thereby fix the problem.
When we schedule an absolute timeout without considering the small time
difference, the end-time for the timeout that is calculated using the
local time value is also smaller than the expected end-time. This can
also lead to directly triggering timeouts that should have triggered
with a certain delay.
As it is not trivial to update the local time value while scheduling a
timeout _without_ calling other timeout handlers, we simply raise the
duration of the new timeout by the age of the local time value.
Issue #2704
This fixes the problem that large timeouts, when rescheduled, are interpreted
to be from the last now_period instead of, what would be right, the next
now_period. This occured if there were multiple pending alarms at the head of
the queue and the reschedule of the first one was done with the other outdated
deadlines still in place.
Issue #2704
Instead of taking the absolute deadline of a timeout as argument from
outside (where it is calculated with a freshly requested now time), we
now take a relative duration as argument and calculate the deadline with
the scheduler-internal now time (which can be a little bit outdated).
This enables us to schedule timeouts without updating the internal now time
and thereby handle all pending timeouts.
Issue #2704
Integrate the code of the Alarm framework directly into the Timeout
framework. The former Alarm-framework methods are all private to the
corresponding classes of the Timeout framework and get prefixed with
'_alarm__'. The latter avoids name clashes and makes it easier to
simplify the code later.
Issue #2704
In the domain class there were several places where output was generated
not conforming to the typical output format of the router ("[domain]
event: parameters").
Issue #2670
When having an interface that yet is not attached to a domain, then a new
configuration comes in and the interface receives a domain name (via the
policy tag) but the corresponding domain doesn't exist, an exception
Domain_tree::No_match is thrown but was not caught and handled until now.
Issue #2670
This follows the guidelines in RFC 5508 to enable forwarding of ICMP
"Destination Unreachable" that correspond to an existing link state in
the NIC router. It also serves as blueprint for forwarding ICMP error
messages in general (They are merely not enabled because we don't test
them).
Issue #2732
By now, the 'verbose packets' output when sending packets was printed after
finish sending the packet. This makes following the packet flow harder if you
have multiple components that print such information.
Issue #2732
The mac_first attribute tells the MAC-address allocator of the router
from which MAC address to start allocating. This is useful, for
instance, if you have nested nic_routers. In this case, identical
MAC-allocator settings have led to name clashes in the past, so, you
want to be able to configure them differently.
Issue #2732
This follows the guidelines in RFC 5508 to enable ICMP echo through a NAPT
channel of the NIC router. It serves also as blueprint for ICMP queries in
general (they are merely not enabled because we don't test them by now).
Issue #2732
The 'verbose packets' output previously was not generated for Interfaces
without a domain. But this is desirable as the router nonetheless
receives packets at such interfaces. This is now fixed and such output
is simply prefixed with a "[?]" denoting that the interface has no
domain.
Issue #2732
We missed to zero-out the ECN field in IPv4 packets. We don't use the ECN
field but there might be old data left in the packet RAM allocated by the
NIC packet streams. If we don't zero-out ECN it might leak old data.
Issue #2732
Add a new 'Vfs_watch_handle' type to the VFS interface. This handle type
will pass a handle context up through the I/O handler to the application
when a notification event occurs.
Watch support implemented for RAM and File_system plugins, all other
file-systems return WATCH_ERR_STATIC by default.
Test at run/fs_rom_update_ram and run/fs_rom_update_fs.
Fix#1934
This patch improves the `Text_painter` utility that is commonly used by
native Genode components to render text:
- Support for subpixel positioning
- Generic interface for accessing font data
- Basic UTF-8 support
Since the change decouples the font format from the 'Text_painter' and
changes the API to use the sub-pixel accurate 'Text_painter::Position'
type, all users of the utility require an adaptation.
Fixes#2716
This file system is meant as a building block for pseudo file systems
that host a directory of several small files where each corresponds to
an attribute of the pseudo file system.
By letting the 'Dir_file_system' accept an arbitrary 'File_system'
as root directory, we can use the 'Dir_file_system' as a building
block for creating other file-system types.
This patch enables the use of the VFS from VFS plugins by passing a
reference of the root directory to the constructors of file-system
instances. Since it changes the signature of 'Vfs::Dir_file_system',
any code that uses the VFS directly requires an adaptation.
Fixes#2701
If the remote DNS server address value of a DHCP server changes, the affected
interfaces do a link down/up to inform all DHCP clients that they should
re-request their DHCP info.
Issue #2730
The dns_server_from attribute of the dhcp-server tag has effect only if
the dns_server attribute of the same tag is not set. If this is the
case, the dns_server_from attribute states the domain from whose IP
config to take the DNS server address. This is useful, for instance, if
the stated domain receives the address of a local DNS server via DHCP.
Whenever the IP config of the stated domain becomes invalid, the DHCP
server switches to a mode where it drops all requests unanswered until
the IP config becomes valid again.
Issue #2730
