Commit Graph

36 Commits

Author SHA1 Message Date
Alexander Boettcher
0ef7e58ef9 platform_drv.inc: support acpi_drv and acpica
Issue #2816
2018-05-30 13:36:31 +02:00
Norman Feske
cb78516bf1 os: add tests to autopilot
Since the autopilot has become able to use the depot, futher tests can
be enabled by default.
2018-04-19 12:38:53 +02:00
Stefan Kalkowski
ad99688853 imx53_qsb: enable automated network tests
Fix #2749
2018-04-19 12:38:24 +02:00
Josef Söntgen
372e426ec7 platform_drv: recognize PCIe NVMe controller
Issue #2747.
2018-04-10 13:56:22 +02:00
Reto Buerki
47724c68c2 platform_drv/x86: Switch to ECAM/MMCONF
Switch port I/O based PCI config space access to memory-mapped IO.  The
base address of the PCI configuration space is acquired by mapping the
ACPI ROM and reading the first <bdf> node. An exception is thrown if the
first <bdf> node is not for PCI domain zero or if multiple <bdf> nodes
exist. This is to reduce complexity and also because multiple PCI
domains are rare.

The PCI configuration space is accessed via I/O mem dataspace which is
created in the platform_drv root and then passed on to the PCI session,
device components and finally to the actual PCI config access instances.

The memory access code is implemented in a way to make it work with Muen
subject monitor (SM) device emulation and also general x86 targets. On
Muen, the simplified device emulation code (which works also for Linux)
always returns 0xffff in EAX to indicate a non-existing device.
Therefore, EAX is enforced in the assembly templates.

Fixes #2547
2018-03-29 14:59:04 +02:00
Stefan Kalkowski
9f945a782f run: enable Wandquad board for network tests
Ref #2665
2018-02-28 11:04:57 +01:00
Stefan Kalkowski
28f7568e82 run: always return driver names in platform.inc
On platforms without nic or audio driver support, the corresponding
functions to return the correct names should return a meaningful
name instead of an empty list. Otherwise, in an erroneous run-script
that calls those functions to append names to the boot modules
the whole 'bin' directory is appended instead, which leads to big
image files or errors when linking the boot modules to core.
2018-02-09 13:34:22 +01:00
Alexander Boettcher
69e71147ef platform_drv: replace nova specific device_pd
by using generic Pd_session::map instead for eager memory mappings of DMA
memory.

Issue #2209
2017-08-18 10:24:47 +02:00
Alexander Boettcher
04b2919a1a acpi_drv: use platform_info for rsdt/xsdt lookup
Issue #2242
2017-06-29 11:59:50 +02:00
Alexander Boettcher
0f227d5d24 run: adjust virtualbox cap quotas to fit native hw 2017-06-08 11:33:31 +02:00
Christian Helmuth
8bd0efced6 Remove obsolete RAM/CAP services from run scripts
Adapted launchpad and also the rm_fault and resource_request tests.

Issue #2407
2017-05-31 13:16:22 +02:00
Norman Feske
773e08976d Assign cap quotas in run scripts and recipes
Issue #2398
2017-05-31 13:16:06 +02:00
Christian Helmuth
b9834bc388 Rename Linux audio driver to linux_audio_drv
Related to #2190
Fixes #2278
2017-03-15 12:32:27 +01:00
Christian Helmuth
43e7cc56a3 Rename Linux NIC driver to linux_nic_drv
Related to #2190
Issue #2278
2017-03-15 12:32:27 +01:00
Martin Stein
d301022fe7 nic_router.run: do not append but concatenate
Makes the script more readable and saves 100 LOC.

Ref #2193
2017-02-28 12:59:22 +01:00
Martin Stein
412c5e5be4 run/platform_drv: add append-free interface
Normally, the platform driver helpers adapt the global run variables directly
via append. But the introduction of a more elegant run script style, that
incorporates dependent strings inline may be a good idea. Thus, we need the
backends of the helpers available as functions that return their string rather
than appending it.

The old interface still exists and uses the new interface as backend.

Ref #2193
2017-02-28 12:59:22 +01:00
Norman Feske
47a129c6af run/platform_drv.inc: add 'need_usb_hid' function
This function returns the information whether the used platform relies
on USB HID for interactive scenarios by default as is the case for most
ARM platforms. In contrast, for x86 the USB driver can be omitted because
we can use the PS/2 driver (that is readily available in repos/os/).
2017-01-31 12:01:12 +01:00
Norman Feske
02d5efcf3f init: apply routing to environment sessions
The init component used to create the CPU/RAM/PD/ROM sessions (the child
environment) for its children by issuing session requests to its parent,
which is typically core. This policy was hard-wired. This patch enables
the routing of the environment sessions of the children of init
according to the configured routing policy.

Because there is no hard-wired policy regarding the environment sessions
anymore, routes to respective services must be explicitly declared in
the init configuration. For this reason, the patch adjusts several run
scripts in this respect.

This patch removes the outdated '<if-args>' special handling of session
labels. The '<if-args>' feature will eventually be removed completely
(ref #2250)

Issue #2197
Issue #2215
Issue #2233
Issue #2250
2017-01-31 12:01:11 +01:00
Stefan Kalkowski
fc273f3840 run: remove vanished kernel/platform specifier 2017-01-13 13:07:01 +01:00
Norman Feske
5a1cef6381 Make label prefixing more strict
This patch unconditionally applies the labeling of sessions and thereby
removes the most common use case of 'Child_policy::filter_session_args'.
Furthermore, the patch removes an ambiguity of the session labels of
sessions created by the parent of behalf of its child, e.g., the PD
session created as part of 'Child' now has the label "<child-name>"
whereas an unlabeled PD-session request originating from the child
has the label "<child-name> -> ". This way, the routing-policy of
'Child_policy::resolve_session_request' can differentiate both cases.

As a consequence, the stricter labeling must now be considered wherever
a precise label was specified as a key for a session route or a server-
side policy selection. The simplest way to adapt those cases is to use a
'label_prefix' instead of the 'label' attribute. Alternatively, the
'label' attribute may used by appending " -> " (note the whitespace).

Fixes #2171
2016-11-30 13:37:07 +01:00
Christian Helmuth
6726e6d7fe Increase quota of ACPI driver
Platforms with more complex ACPI configurations require more RAM in the
driver, e.g., ~160K for the test notebook on my desk.
2016-08-10 11:07:48 +02:00
Alexander Boettcher
4e9aeb45ea platform_drv: sync startup between acpica
- platform_drv announces a separate "Acpi" session
- platform_drv waits for ROM "system" to change state to "acpi_ready"
- acpica waits for "Acpi" announcement
- acpica uses the platform driver via "Acpi" to reconfigure PCI devices
- acpica changes "system" state to "acpi_ready" after it ready with initialization
- platform_drv reacts on "system" state change to "acpi_ready" by announcing "Platform" session
- drivers start to operate as usual

Issue #2009
2016-06-22 12:21:42 +02:00
Alexander Boettcher
57f47db823 platform_drv/x86: support ACPI reset
Evaluate fadt xml node in report from acpi_drv. If the io ports in the range
of 0xcf8+4 are necessary for the reset than the platform driver will
react on the 'system' state 'reset' and reboot.

Issue #1962
2016-05-26 15:54:14 +02:00
Alexander Boettcher
6b0022f032 platform_drv: drop deprecated config syntax
- policy entry without deprecated rom node
- skip if_arg and use label directly for routing

see Issue #1801

Issue #1962
2016-05-26 15:54:13 +02:00
Norman Feske
3bceefc9cf Omit superfluous use of "CAP"/"SIGNAL" services
The functionality of the former "CAP" and "SIGNAL" services is now
provided by core's "PD" service.
2016-05-09 13:24:51 +02:00
Reto Buerki
f1d2d7251d hw_x86_64_muen: Include static ACPI report ROM
Enable the ACPI functionality in the platform_drv on hw_x86_64_muen and
provide a simple generated XML report as ROM session in order to make
the PCI configuration space available.

This is a requirement to implement support for MSI on hw_x86_64_muen.
2016-02-26 11:36:53 +01:00
Stefan Kalkowski
d65beb970d dde_linux: KMS-based Intel framebuffer driver (II)
* enable i915 driver from Linux 3.14.5
* tested for generation 5 till 8 GPUs

The driver can be configured at run-time via the config ROM. Every
connector of the graphic card can be configured separately using the
following syntax

  <config>
    <connector name="LVDS-11" width="1280" height="800" enabled="true"/>
  </config>

Also, when enabled within the intel framebuffer driver configuration like
the following

  <config buffered="yes"/>

a simple ram dataspace is propagated to the client and the driver
itselfs copies from that buffer to the framebuffer triggered via refresh
calls. This option is useful to alleviate tearing effects.

The  driver distributes all available connectors of the graphic card and
their supported resolutions via a report. It looks like follows

  <connectors>
    <connector name="LVDS-11" connected="1">
      <mode width="1280" height="800" hz="60"/>
      ...
    </connector>
    ...
  </connectors>

The driver distributes the report only if this is stated within its
configuration, like the following

  <config>
    <report connectors="yes"/>
  </config>

Fix #1764
2015-11-29 18:17:07 +01:00
Christian Helmuth
a0d92fcdb8 platform_drv: increase RAM config for -O0 builds 2015-11-18 12:22:05 +01:00
Stefan Kalkowski
ed52d5a211 Introduce 'spec' subdirectories to outline aspects
Instead of holding SPEC-variable dependent files and directories inline
within the repository structure, move them into 'spec' subdirectories
at the corresponding levels, e.g.:

  repos/base/include/spec
  repos/base/mk/spec
  repos/base/lib/mk/spec
  repos/base/src/core/spec
  ...

Moreover, this commit removes the 'platform' directories. That term was
used in an overloaded sense. All SPEC-relative 'platform' directories are
now named 'spec'. Other files, like for instance those related to the
kernel/architecture specific startup library, where moved from 'platform'
directories to explicit, more meaningful places like e.g.: 'src/lib/startup'.

Fix #1673
2015-09-16 13:58:50 +02:00
Reinier Millo Sánchez
433f859cb9 foc_odroid_x2: USB support
Fixes #1627
2015-08-31 09:09:22 +02:00
Josef Söntgen
4992903233 Rename audio_out_drv to audio_drv
With the introducation of the Audio_in session interface it makes
sense to rename the current available audio drivers. At the moment
only the dde_bsd audio_drv supports Audio_out as well as Audio_in.
The Linux audio_drv only supports Audio_out (there is no demand for
Audio_in support currently) but is renamed nonetheless to make it
easiert to write generic run scripts.

Issue #1644.
2015-08-21 10:59:46 +02:00
Alexy Gallardo Segura
c14fe7e6c7 foc: Odroid-X2 basic support
Fix #1597
2015-07-21 09:28:25 +02:00
Josef Söntgen
80893dfcfc platform_drv: specific AUDIO/HDAUDIO class aliases
The alias AUDIO matches audio multimedia device while the HDAUDIO
alias matches HD audio multimedia devices.

Fixes #1581
2015-06-22 14:43:37 +02:00
Alexander Boettcher
1f40d9de6a pci: convert to platform_drv
Fixes #1542
2015-06-22 14:43:34 +02:00
Alexander Boettcher
1c38d4903b x86: use report_rom for acpi and pci driver
Issue #1542
2015-06-09 11:00:12 +02:00
Alexander Boettcher
e1896e3b44 run: add platform_drv include for usage by scripts
Related to #765 and used for issue #1542
2015-06-09 11:00:10 +02:00