diff --git a/tool/run/README b/tool/run/README
index 4609975f3..3875ac37b 100644
--- a/tool/run/README
+++ b/tool/run/README
@@ -92,18 +92,18 @@ for output while loading the files via TFTP:
 !                              --tftp-offset-dir /x86 \
 !          --include log/serial --log-serial-cmd 'picocom -b 115200 /dev/ttyUSB0'
 
-Executing hw on a rpi using powerplug to reset the hardware, JTAG to load the
-image and USB serial to capture the output:
+Executing hw on a rpi using NETIO powerplug to reset the hardware, JTAG to load
+the image and USB serial to capture the output:
 
 !RUN_OPT = --include boot_dir/hw \
-!          --include power_on/powerplug --power-on-powerplug-ip 10.23.42.5 \
-!                                       --power-on-powerplug-user admin \
-!                                       --power-on-powerplug-password secret \
-!                                       --power-on-powerplug-port 1
-!          --include power_off/powerplug --power-off-powerplug-ip 10.23.42.5 \
-!                                        --power-off-powerplug-user admin \
-!                                        --power-off-powerplug-password secret \
-!                                        --power-off-powerplug-port 1
+!          --include power_on/netio --power-on-netio-host 10.23.42.5 \
+!                                   --power-on-netio-user admin \
+!                                   --power-on-netio-password secret \
+!                                   --power-on-netio-port 1
+!          --include power_off/netio --power-off-netio-host 10.23.42.5 \
+!                                    --power-off-netio-user admin \
+!                                    --power-off-netio-password secret \
+!                                    --power-off-netio-port 1
 !          --include load/jtag \
 !          --load-jtag-debugger /usr/share/openocd/scripts/interface/flyswatter2.cfg \
 !          --load-jtag-board /usr/share/openocd/scripts/interface/raspberrypi.cfg \
diff --git a/tool/run/log/amt b/tool/run/log/amt
index 0efe79b63..601e6bff4 100644
--- a/tool/run/log/amt
+++ b/tool/run/log/amt
@@ -1,7 +1,7 @@
 ##
 # Get output of the target machine via Intel AMT's SoL feature
 #
-# \param --amt-host       IP address of target machine
+# \param --amt-host       network address of target machine
 # \param --amt-password   AMT password for target machine
 #
 
diff --git a/tool/run/powerplug.inc b/tool/run/power_netio.inc
similarity index 67%
rename from tool/run/powerplug.inc
rename to tool/run/power_netio.inc
index b648c5471..aacb2c80c 100644
--- a/tool/run/powerplug.inc
+++ b/tool/run/power_netio.inc
@@ -1,5 +1,5 @@
-proc power_plug_connect { server_ip user_name password } {
-	spawn telnet $server_ip 1234
+proc power_netio_connect { host user_name password } {
+	spawn telnet $host 1234
 	set connection_id $spawn_id
 	expect -i $connection_id "KSHELL V1.*"
 	send -i $connection_id "login $user_name $password\n"
diff --git a/tool/run/power_off/netio b/tool/run/power_off/netio
new file mode 100644
index 000000000..0be3af70e
--- /dev/null
+++ b/tool/run/power_off/netio
@@ -0,0 +1,45 @@
+##
+# Reset the target machine via NETIO4/NETIO230 powerplug by Koukaam
+#
+# \param --power-off-netio-host       network address of device
+# \param --power-off-netio-user       user for device
+# \param --power-off-netio-password   password for device
+# \param --power-off-netio-port       target port of device
+#
+
+
+source [genode_dir]/tool/run/power_netio.inc
+
+
+proc power_off_netio_host { } {
+	return [get_cmd_arg_first --power-off-netio-host 1]
+}
+
+
+proc power_off_netio_user { } {
+	return [get_cmd_arg_first --power-off-netio-user 1]
+}
+
+
+proc power_off_netio_password { } {
+	return [get_cmd_arg_first --power-off-netio-password 1]
+}
+
+
+proc power_off_netio_port { } {
+	return [get_cmd_arg_first --power-off-netio-port 1]
+}
+
+
+proc run_power_off { } {
+	set host [power_off_netio_host]
+	set user_name [power_off_netio_user]
+	set password  [power_off_netio_password]
+	set power_port [power_off_netio_port]
+
+	set connection_id [power_netio_connect $host $user_name $password]
+
+	puts "switch port $power_port off"
+	send -i $connection_id "port $power_port 0\n"
+	expect -i $connection_id "250 OK"
+}
diff --git a/tool/run/power_off/powerplug b/tool/run/power_off/powerplug
deleted file mode 100644
index b28d3b97f..000000000
--- a/tool/run/power_off/powerplug
+++ /dev/null
@@ -1,45 +0,0 @@
-##
-# Reset the target machine via powerplug
-#
-# \param --power-off-powerplug-ip         IP address of powerplug device
-# \param --power-off-powerplug-user       user for powerplug device
-# \param --power-off-powerplug-password   password for powerplug device
-# \param --power-off-powerplug-port       target port of powerplug device
-#
-
-
-source [genode_dir]/tool/run/powerplug.inc
-
-
-proc power_off_powerplug_ip { } {
-	return [get_cmd_arg_first --power-off-powerplug-ip 1]
-}
-
-
-proc power_off_powerplug_user { } {
-	return [get_cmd_arg_first --power-off-powerplug-user 1]
-}
-
-
-proc power_off_powerplug_password { } {
-	return [get_cmd_arg_first --power-off-powerplug-password 1]
-}
-
-
-proc power_off_powerplug_port { } {
-	return [get_cmd_arg_first --power-off-powerplug-port 1]
-}
-
-
-proc run_power_off { } {
-	set server_ip [power_off_powerplug_ip]
-	set user_name [power_off_powerplug_user]
-	set password  [power_off_powerplug_password]
-	set power_port [power_off_powerplug_port]
-
-	set connection_id [power_plug_connect $server_ip $user_name $password]
-
-	puts "switch port $power_port off"
-	send -i $connection_id "port $power_port 0\n"
-	expect -i $connection_id "250 OK"
-}
diff --git a/tool/run/power_on/amt b/tool/run/power_on/amt
index 2dea5494b..4c0066603 100644
--- a/tool/run/power_on/amt
+++ b/tool/run/power_on/amt
@@ -1,7 +1,7 @@
 ##
 # Reset the target machine via Intel AMT
 #
-# \param --power-on-amt-host       IP address of target machine
+# \param --power-on-amt-host       network address of target machine
 # \param --power-on-amt-password   AMT password for target machine
 #
 
diff --git a/tool/run/power_on/netio b/tool/run/power_on/netio
new file mode 100644
index 000000000..ff150ab04
--- /dev/null
+++ b/tool/run/power_on/netio
@@ -0,0 +1,54 @@
+##
+# Reset the target machine via NETIO4/NETIO230 powerplug by Koukaam
+#
+# \param --power-on-netio-host       network address of device
+# \param --power-on-netio-user       user for device
+# \param --power-on-netio-password   password for device
+# \param --power-on-netio-port       target port of device
+#
+
+source [genode_dir]/tool/run/power_netio.inc
+
+
+proc power_on_netio_host { } {
+	return [get_cmd_arg_first --power-on-netio-host 1]
+}
+
+
+proc power_on_netio_user { } {
+	return [get_cmd_arg_first --power-on-netio-user 1]
+}
+
+
+proc power_on_netio_password { } {
+	return [get_cmd_arg_first --power-on-netio-password 1]
+}
+
+
+proc power_on_netio_port { } {
+	return [get_cmd_arg_first --power-on-netio-port 1]
+}
+
+
+
+proc run_power_on { } {
+	set host [power_on_netio_host]
+	set user_name [power_on_netio_user]
+	set password  [power_on_netio_password]
+	set power_port [power_on_netio_port]
+
+	set connection_id [power_netio_connect $host $user_name $password]
+
+	send -i $connection_id "port $power_port\n"
+	expect -i $connection_id -re {250 [0-9]+.*\n}
+	regexp -all {[0-9]+} $expect_out(0,string) power_status
+	if {!$power_status} {
+		puts "port $power_port is off - switching it on"
+		send -i $connection_id "port $power_port 1\n"
+		expect -i $connection_id "250 OK"
+	} else {
+		puts "port $power_port is on - reset port"
+		send -i $connection_id "port $power_port int\n"
+		expect -i $connection_id "250 OK"
+	}
+}
diff --git a/tool/run/power_on/powerplug b/tool/run/power_on/powerplug
deleted file mode 100644
index 88caaebe0..000000000
--- a/tool/run/power_on/powerplug
+++ /dev/null
@@ -1,54 +0,0 @@
-##
-# Reset the target machine via powerplug
-#
-# \param --power-on-powerplug-ip         IP address of powerplug device
-# \param --power-on-powerplug-user       user for powerplug device
-# \param --power-on-powerplug-password   password for powerplug device
-# \param --power-on-powerplug-port       target port of powerplug device
-#
-
-source [genode_dir]/tool/run/powerplug.inc
-
-
-proc power_on_powerplug_ip { } {
-	return [get_cmd_arg_first --power-on-powerplug-ip 1]
-}
-
-
-proc power_on_powerplug_user { } {
-	return [get_cmd_arg_first --power-on-powerplug-user 1]
-}
-
-
-proc power_on_powerplug_password { } {
-	return [get_cmd_arg_first --power-on-powerplug-password 1]
-}
-
-
-proc power_on_powerplug_port { } {
-	return [get_cmd_arg_first --power-on-powerplug-port 1]
-}
-
-
-
-proc run_power_on { } {
-	set server_ip [power_on_powerplug_ip]
-	set user_name [power_on_powerplug_user]
-	set password  [power_on_powerplug_password]
-	set power_port [power_on_powerplug_port]
-
-	set connection_id [power_plug_connect $server_ip $user_name $password]
-
-	send -i $connection_id "port $power_port\n"
-	expect -i $connection_id -re {250 [0-9]+.*\n}
-	regexp -all {[0-9]+} $expect_out(0,string) power_status
-	if {!$power_status} {
-		puts "port $power_port is off - switching it on"
-		send -i $connection_id "port $power_port 1\n"
-		expect -i $connection_id "250 OK"
-	} else {
-		puts "port $power_port is on - reset port"
-		send -i $connection_id "port $power_port int\n"
-		expect -i $connection_id "250 OK"
-	}
-}