genode/repos/base/include/timer/timeout.h

308 lines
7.6 KiB
C
Raw Normal View History

/*
* \brief Multiplexing one time source amongst different timeouts
* \author Martin Stein
* \date 2016-11-04
os/timer: interpolate time via timestamps Previously, the Genode::Timer::curr_time always used the Timer_session::elapsed_ms RPC as back end. Now, Genode::Timer reads this remote time only in a periodic fashion independently from the calls to Genode::Timer::curr_time. If now one calls Genode::Timer::curr_time, the function takes the last read remote time value and adapts it using the timestamp difference since the remote-time read. The conversion factor from timestamps to time is estimated on every remote-time read using the last read remote-time value and the timestamp difference since the last remote time read. This commit also re-works the timeout test. The test now has two stages. In the first stage, it tests fast polling of the Genode::Timer::curr_time. This stage checks the error between locally interpolated and timer-driver time as well as wether the locally interpolated time is monotone and sufficiently homogeneous. In the second stage several periodic and one-shot timeouts are scheduled at once. This stage checks if the timeouts trigger sufficiently precise. This commit adds the new Kernel::time syscall to base-hw. The syscall is solely used by the Genode::Timer on base-hw as substitute for the timestamp. This is because on ARM, the timestamp function uses the ARM performance counter that stops counting when the WFI (wait for interrupt) instruction is active. This instruction, however is used by the base-hw idle contexts that get active when no user thread needs to be scheduled. Thus, the ARM performance counter is not a good choice for time interpolation and we use the kernel internal time instead. With this commit, the timeout library becomes a basic library. That means that it is linked against the LDSO which then provides it to the program it serves. Furthermore, you can't use the timeout library anymore without the LDSO because through the kernel-dependent LDSO make-files we can achieve a kernel-dependent timeout implementation. This commit introduces a structured Duration type that shall successively replace the use of Microseconds, Milliseconds, and integer types for duration values. Open issues: * The timeout test fails on Raspberry PI because of precision errors in the first stage. However, this does not render the framework unusable in general on the RPI but merely is an issue when speaking of microseconds precision. * If we run on ARM with another Kernel than HW the timestamp speed may continuously vary from almost 0 up to CPU speed. The Timer, however, only uses interpolation if the timestamp speed remained stable (12.5% tolerance) for at least 3 observation periods. Currently, one period is 100ms, so its 300ms. As long as this is not the case, Timer_session::elapsed_ms is called instead. Anyway, it might happen that the CPU load was stable for some time so interpolation becomes active and now the timestamp speed drops. In the worst case, we would now have 100ms of slowed down time. The bad thing about it would be, that this also affects the timeout of the period. Thus, it might "freeze" the local time for more than 100ms. On the other hand, if the timestamp speed suddenly raises after some stable time, interpolated time can get too fast. This would shorten the period but nonetheless may result in drifting away into the far future. Now we would have the problem that we can't deliver the real time anymore until it has caught up because the output of Timer::curr_time shall be monotone. So, effectively local time might "freeze" again for more than 100ms. It would be a solution to not use the Trace::timestamp on ARM w/o HW but a function whose return value causes the Timer to never use interpolation because of its stability policy. Fixes #2400
2017-04-22 00:52:23 +02:00
*
* These classes are not meant to be used directly. They merely exist to share
* the generic parts of timeout-scheduling between the Timer::Connection and the
* Timer driver. For user-level timeout-scheduling you should use the interface
* in timer_session/connection.h instead.
*/
/*
* Copyright (C) 2016-2017 Genode Labs GmbH
*
* This file is part of the Genode OS framework, which is distributed
* under the terms of the GNU Affero General Public License version 3.
*/
os/timer: interpolate time via timestamps Previously, the Genode::Timer::curr_time always used the Timer_session::elapsed_ms RPC as back end. Now, Genode::Timer reads this remote time only in a periodic fashion independently from the calls to Genode::Timer::curr_time. If now one calls Genode::Timer::curr_time, the function takes the last read remote time value and adapts it using the timestamp difference since the remote-time read. The conversion factor from timestamps to time is estimated on every remote-time read using the last read remote-time value and the timestamp difference since the last remote time read. This commit also re-works the timeout test. The test now has two stages. In the first stage, it tests fast polling of the Genode::Timer::curr_time. This stage checks the error between locally interpolated and timer-driver time as well as wether the locally interpolated time is monotone and sufficiently homogeneous. In the second stage several periodic and one-shot timeouts are scheduled at once. This stage checks if the timeouts trigger sufficiently precise. This commit adds the new Kernel::time syscall to base-hw. The syscall is solely used by the Genode::Timer on base-hw as substitute for the timestamp. This is because on ARM, the timestamp function uses the ARM performance counter that stops counting when the WFI (wait for interrupt) instruction is active. This instruction, however is used by the base-hw idle contexts that get active when no user thread needs to be scheduled. Thus, the ARM performance counter is not a good choice for time interpolation and we use the kernel internal time instead. With this commit, the timeout library becomes a basic library. That means that it is linked against the LDSO which then provides it to the program it serves. Furthermore, you can't use the timeout library anymore without the LDSO because through the kernel-dependent LDSO make-files we can achieve a kernel-dependent timeout implementation. This commit introduces a structured Duration type that shall successively replace the use of Microseconds, Milliseconds, and integer types for duration values. Open issues: * The timeout test fails on Raspberry PI because of precision errors in the first stage. However, this does not render the framework unusable in general on the RPI but merely is an issue when speaking of microseconds precision. * If we run on ARM with another Kernel than HW the timestamp speed may continuously vary from almost 0 up to CPU speed. The Timer, however, only uses interpolation if the timestamp speed remained stable (12.5% tolerance) for at least 3 observation periods. Currently, one period is 100ms, so its 300ms. As long as this is not the case, Timer_session::elapsed_ms is called instead. Anyway, it might happen that the CPU load was stable for some time so interpolation becomes active and now the timestamp speed drops. In the worst case, we would now have 100ms of slowed down time. The bad thing about it would be, that this also affects the timeout of the period. Thus, it might "freeze" the local time for more than 100ms. On the other hand, if the timestamp speed suddenly raises after some stable time, interpolated time can get too fast. This would shorten the period but nonetheless may result in drifting away into the far future. Now we would have the problem that we can't deliver the real time anymore until it has caught up because the output of Timer::curr_time shall be monotone. So, effectively local time might "freeze" again for more than 100ms. It would be a solution to not use the Trace::timestamp on ARM w/o HW but a function whose return value causes the Timer to never use interpolation because of its stability policy. Fixes #2400
2017-04-22 00:52:23 +02:00
#ifndef _TIMER__TIMEOUT_H_
#define _TIMER__TIMEOUT_H_
/* Genode includes */
#include <util/noncopyable.h>
#include <base/duration.h>
2020-02-19 16:26:40 +01:00
#include <base/log.h>
#include <base/mutex.h>
namespace Genode {
os/timer: interpolate time via timestamps Previously, the Genode::Timer::curr_time always used the Timer_session::elapsed_ms RPC as back end. Now, Genode::Timer reads this remote time only in a periodic fashion independently from the calls to Genode::Timer::curr_time. If now one calls Genode::Timer::curr_time, the function takes the last read remote time value and adapts it using the timestamp difference since the remote-time read. The conversion factor from timestamps to time is estimated on every remote-time read using the last read remote-time value and the timestamp difference since the last remote time read. This commit also re-works the timeout test. The test now has two stages. In the first stage, it tests fast polling of the Genode::Timer::curr_time. This stage checks the error between locally interpolated and timer-driver time as well as wether the locally interpolated time is monotone and sufficiently homogeneous. In the second stage several periodic and one-shot timeouts are scheduled at once. This stage checks if the timeouts trigger sufficiently precise. This commit adds the new Kernel::time syscall to base-hw. The syscall is solely used by the Genode::Timer on base-hw as substitute for the timestamp. This is because on ARM, the timestamp function uses the ARM performance counter that stops counting when the WFI (wait for interrupt) instruction is active. This instruction, however is used by the base-hw idle contexts that get active when no user thread needs to be scheduled. Thus, the ARM performance counter is not a good choice for time interpolation and we use the kernel internal time instead. With this commit, the timeout library becomes a basic library. That means that it is linked against the LDSO which then provides it to the program it serves. Furthermore, you can't use the timeout library anymore without the LDSO because through the kernel-dependent LDSO make-files we can achieve a kernel-dependent timeout implementation. This commit introduces a structured Duration type that shall successively replace the use of Microseconds, Milliseconds, and integer types for duration values. Open issues: * The timeout test fails on Raspberry PI because of precision errors in the first stage. However, this does not render the framework unusable in general on the RPI but merely is an issue when speaking of microseconds precision. * If we run on ARM with another Kernel than HW the timestamp speed may continuously vary from almost 0 up to CPU speed. The Timer, however, only uses interpolation if the timestamp speed remained stable (12.5% tolerance) for at least 3 observation periods. Currently, one period is 100ms, so its 300ms. As long as this is not the case, Timer_session::elapsed_ms is called instead. Anyway, it might happen that the CPU load was stable for some time so interpolation becomes active and now the timestamp speed drops. In the worst case, we would now have 100ms of slowed down time. The bad thing about it would be, that this also affects the timeout of the period. Thus, it might "freeze" the local time for more than 100ms. On the other hand, if the timestamp speed suddenly raises after some stable time, interpolated time can get too fast. This would shorten the period but nonetheless may result in drifting away into the far future. Now we would have the problem that we can't deliver the real time anymore until it has caught up because the output of Timer::curr_time shall be monotone. So, effectively local time might "freeze" again for more than 100ms. It would be a solution to not use the Trace::timestamp on ARM w/o HW but a function whose return value causes the Timer to never use interpolation because of its stability policy. Fixes #2400
2017-04-22 00:52:23 +02:00
class Time_source;
class Timeout_scheduler;
class Timeout;
class Alarm_timeout_scheduler;
}
os/timer: interpolate time via timestamps Previously, the Genode::Timer::curr_time always used the Timer_session::elapsed_ms RPC as back end. Now, Genode::Timer reads this remote time only in a periodic fashion independently from the calls to Genode::Timer::curr_time. If now one calls Genode::Timer::curr_time, the function takes the last read remote time value and adapts it using the timestamp difference since the remote-time read. The conversion factor from timestamps to time is estimated on every remote-time read using the last read remote-time value and the timestamp difference since the last remote time read. This commit also re-works the timeout test. The test now has two stages. In the first stage, it tests fast polling of the Genode::Timer::curr_time. This stage checks the error between locally interpolated and timer-driver time as well as wether the locally interpolated time is monotone and sufficiently homogeneous. In the second stage several periodic and one-shot timeouts are scheduled at once. This stage checks if the timeouts trigger sufficiently precise. This commit adds the new Kernel::time syscall to base-hw. The syscall is solely used by the Genode::Timer on base-hw as substitute for the timestamp. This is because on ARM, the timestamp function uses the ARM performance counter that stops counting when the WFI (wait for interrupt) instruction is active. This instruction, however is used by the base-hw idle contexts that get active when no user thread needs to be scheduled. Thus, the ARM performance counter is not a good choice for time interpolation and we use the kernel internal time instead. With this commit, the timeout library becomes a basic library. That means that it is linked against the LDSO which then provides it to the program it serves. Furthermore, you can't use the timeout library anymore without the LDSO because through the kernel-dependent LDSO make-files we can achieve a kernel-dependent timeout implementation. This commit introduces a structured Duration type that shall successively replace the use of Microseconds, Milliseconds, and integer types for duration values. Open issues: * The timeout test fails on Raspberry PI because of precision errors in the first stage. However, this does not render the framework unusable in general on the RPI but merely is an issue when speaking of microseconds precision. * If we run on ARM with another Kernel than HW the timestamp speed may continuously vary from almost 0 up to CPU speed. The Timer, however, only uses interpolation if the timestamp speed remained stable (12.5% tolerance) for at least 3 observation periods. Currently, one period is 100ms, so its 300ms. As long as this is not the case, Timer_session::elapsed_ms is called instead. Anyway, it might happen that the CPU load was stable for some time so interpolation becomes active and now the timestamp speed drops. In the worst case, we would now have 100ms of slowed down time. The bad thing about it would be, that this also affects the timeout of the period. Thus, it might "freeze" the local time for more than 100ms. On the other hand, if the timestamp speed suddenly raises after some stable time, interpolated time can get too fast. This would shorten the period but nonetheless may result in drifting away into the far future. Now we would have the problem that we can't deliver the real time anymore until it has caught up because the output of Timer::curr_time shall be monotone. So, effectively local time might "freeze" again for more than 100ms. It would be a solution to not use the Trace::timestamp on ARM w/o HW but a function whose return value causes the Timer to never use interpolation because of its stability policy. Fixes #2400
2017-04-22 00:52:23 +02:00
namespace Timer
{
class Connection;
class Root_component;
}
/**
* Interface of a time source that can handle one timeout at a time
*/
Follow practices suggested by "Effective C++" The patch adjust the code of the base, base-<kernel>, and os repository. To adapt existing components to fix violations of the best practices suggested by "Effective C++" as reported by the -Weffc++ compiler argument. The changes follow the patterns outlined below: * A class with virtual functions can no longer publicly inherit base classed without a vtable. The inherited object may either be moved to a member variable, or inherited privately. The latter would be used for classes that inherit 'List::Element' or 'Avl_node'. In order to enable the 'List' and 'Avl_tree' to access the meta data, the 'List' must become a friend. * Instead of adding a virtual destructor to abstract base classes, we inherit the new 'Interface' class, which contains a virtual destructor. This way, single-line abstract base classes can stay as compact as they are now. The 'Interface' utility resides in base/include/util/interface.h. * With the new warnings enabled, all member variables must be explicitly initialized. Basic types may be initialized with '='. All other types are initialized with braces '{ ... }' or as class initializers. If basic types and non-basic types appear in a row, it is nice to only use the brace syntax (also for basic types) and align the braces. * If a class contains pointers as members, it must now also provide a copy constructor and assignment operator. In the most cases, one would make them private, effectively disallowing the objects to be copied. Unfortunately, this warning cannot be fixed be inheriting our existing 'Noncopyable' class (the compiler fails to detect that the inheriting class cannot be copied and still gives the error). For now, we have to manually add declarations for both the copy constructor and assignment operator as private class members. Those declarations should be prepended with a comment like this: /* * Noncopyable */ Thread(Thread const &); Thread &operator = (Thread const &); In the future, we should revisit these places and try to replace the pointers with references. In the presence of at least one reference member, the compiler would no longer implicitly generate a copy constructor. So we could remove the manual declaration. Issue #465
2017-12-21 15:42:15 +01:00
struct Genode::Time_source : Interface
os/timer: interpolate time via timestamps Previously, the Genode::Timer::curr_time always used the Timer_session::elapsed_ms RPC as back end. Now, Genode::Timer reads this remote time only in a periodic fashion independently from the calls to Genode::Timer::curr_time. If now one calls Genode::Timer::curr_time, the function takes the last read remote time value and adapts it using the timestamp difference since the remote-time read. The conversion factor from timestamps to time is estimated on every remote-time read using the last read remote-time value and the timestamp difference since the last remote time read. This commit also re-works the timeout test. The test now has two stages. In the first stage, it tests fast polling of the Genode::Timer::curr_time. This stage checks the error between locally interpolated and timer-driver time as well as wether the locally interpolated time is monotone and sufficiently homogeneous. In the second stage several periodic and one-shot timeouts are scheduled at once. This stage checks if the timeouts trigger sufficiently precise. This commit adds the new Kernel::time syscall to base-hw. The syscall is solely used by the Genode::Timer on base-hw as substitute for the timestamp. This is because on ARM, the timestamp function uses the ARM performance counter that stops counting when the WFI (wait for interrupt) instruction is active. This instruction, however is used by the base-hw idle contexts that get active when no user thread needs to be scheduled. Thus, the ARM performance counter is not a good choice for time interpolation and we use the kernel internal time instead. With this commit, the timeout library becomes a basic library. That means that it is linked against the LDSO which then provides it to the program it serves. Furthermore, you can't use the timeout library anymore without the LDSO because through the kernel-dependent LDSO make-files we can achieve a kernel-dependent timeout implementation. This commit introduces a structured Duration type that shall successively replace the use of Microseconds, Milliseconds, and integer types for duration values. Open issues: * The timeout test fails on Raspberry PI because of precision errors in the first stage. However, this does not render the framework unusable in general on the RPI but merely is an issue when speaking of microseconds precision. * If we run on ARM with another Kernel than HW the timestamp speed may continuously vary from almost 0 up to CPU speed. The Timer, however, only uses interpolation if the timestamp speed remained stable (12.5% tolerance) for at least 3 observation periods. Currently, one period is 100ms, so its 300ms. As long as this is not the case, Timer_session::elapsed_ms is called instead. Anyway, it might happen that the CPU load was stable for some time so interpolation becomes active and now the timestamp speed drops. In the worst case, we would now have 100ms of slowed down time. The bad thing about it would be, that this also affects the timeout of the period. Thus, it might "freeze" the local time for more than 100ms. On the other hand, if the timestamp speed suddenly raises after some stable time, interpolated time can get too fast. This would shorten the period but nonetheless may result in drifting away into the far future. Now we would have the problem that we can't deliver the real time anymore until it has caught up because the output of Timer::curr_time shall be monotone. So, effectively local time might "freeze" again for more than 100ms. It would be a solution to not use the Trace::timestamp on ARM w/o HW but a function whose return value causes the Timer to never use interpolation because of its stability policy. Fixes #2400
2017-04-22 00:52:23 +02:00
{
/**
* Interface of a timeout callback
*/
Follow practices suggested by "Effective C++" The patch adjust the code of the base, base-<kernel>, and os repository. To adapt existing components to fix violations of the best practices suggested by "Effective C++" as reported by the -Weffc++ compiler argument. The changes follow the patterns outlined below: * A class with virtual functions can no longer publicly inherit base classed without a vtable. The inherited object may either be moved to a member variable, or inherited privately. The latter would be used for classes that inherit 'List::Element' or 'Avl_node'. In order to enable the 'List' and 'Avl_tree' to access the meta data, the 'List' must become a friend. * Instead of adding a virtual destructor to abstract base classes, we inherit the new 'Interface' class, which contains a virtual destructor. This way, single-line abstract base classes can stay as compact as they are now. The 'Interface' utility resides in base/include/util/interface.h. * With the new warnings enabled, all member variables must be explicitly initialized. Basic types may be initialized with '='. All other types are initialized with braces '{ ... }' or as class initializers. If basic types and non-basic types appear in a row, it is nice to only use the brace syntax (also for basic types) and align the braces. * If a class contains pointers as members, it must now also provide a copy constructor and assignment operator. In the most cases, one would make them private, effectively disallowing the objects to be copied. Unfortunately, this warning cannot be fixed be inheriting our existing 'Noncopyable' class (the compiler fails to detect that the inheriting class cannot be copied and still gives the error). For now, we have to manually add declarations for both the copy constructor and assignment operator as private class members. Those declarations should be prepended with a comment like this: /* * Noncopyable */ Thread(Thread const &); Thread &operator = (Thread const &); In the future, we should revisit these places and try to replace the pointers with references. In the presence of at least one reference member, the compiler would no longer implicitly generate a copy constructor. So we could remove the manual declaration. Issue #465
2017-12-21 15:42:15 +01:00
struct Timeout_handler : Interface
os/timer: interpolate time via timestamps Previously, the Genode::Timer::curr_time always used the Timer_session::elapsed_ms RPC as back end. Now, Genode::Timer reads this remote time only in a periodic fashion independently from the calls to Genode::Timer::curr_time. If now one calls Genode::Timer::curr_time, the function takes the last read remote time value and adapts it using the timestamp difference since the remote-time read. The conversion factor from timestamps to time is estimated on every remote-time read using the last read remote-time value and the timestamp difference since the last remote time read. This commit also re-works the timeout test. The test now has two stages. In the first stage, it tests fast polling of the Genode::Timer::curr_time. This stage checks the error between locally interpolated and timer-driver time as well as wether the locally interpolated time is monotone and sufficiently homogeneous. In the second stage several periodic and one-shot timeouts are scheduled at once. This stage checks if the timeouts trigger sufficiently precise. This commit adds the new Kernel::time syscall to base-hw. The syscall is solely used by the Genode::Timer on base-hw as substitute for the timestamp. This is because on ARM, the timestamp function uses the ARM performance counter that stops counting when the WFI (wait for interrupt) instruction is active. This instruction, however is used by the base-hw idle contexts that get active when no user thread needs to be scheduled. Thus, the ARM performance counter is not a good choice for time interpolation and we use the kernel internal time instead. With this commit, the timeout library becomes a basic library. That means that it is linked against the LDSO which then provides it to the program it serves. Furthermore, you can't use the timeout library anymore without the LDSO because through the kernel-dependent LDSO make-files we can achieve a kernel-dependent timeout implementation. This commit introduces a structured Duration type that shall successively replace the use of Microseconds, Milliseconds, and integer types for duration values. Open issues: * The timeout test fails on Raspberry PI because of precision errors in the first stage. However, this does not render the framework unusable in general on the RPI but merely is an issue when speaking of microseconds precision. * If we run on ARM with another Kernel than HW the timestamp speed may continuously vary from almost 0 up to CPU speed. The Timer, however, only uses interpolation if the timestamp speed remained stable (12.5% tolerance) for at least 3 observation periods. Currently, one period is 100ms, so its 300ms. As long as this is not the case, Timer_session::elapsed_ms is called instead. Anyway, it might happen that the CPU load was stable for some time so interpolation becomes active and now the timestamp speed drops. In the worst case, we would now have 100ms of slowed down time. The bad thing about it would be, that this also affects the timeout of the period. Thus, it might "freeze" the local time for more than 100ms. On the other hand, if the timestamp speed suddenly raises after some stable time, interpolated time can get too fast. This would shorten the period but nonetheless may result in drifting away into the far future. Now we would have the problem that we can't deliver the real time anymore until it has caught up because the output of Timer::curr_time shall be monotone. So, effectively local time might "freeze" again for more than 100ms. It would be a solution to not use the Trace::timestamp on ARM w/o HW but a function whose return value causes the Timer to never use interpolation because of its stability policy. Fixes #2400
2017-04-22 00:52:23 +02:00
{
virtual void handle_timeout(Duration curr_time) = 0;
};
/**
* Return the current time of the source
*/
virtual Duration curr_time() = 0;
/**
* Return the maximum timeout duration that the source can handle
*/
virtual Microseconds max_timeout() const = 0;
/**
* Install a timeout, overrides the last timeout if any
*
* \param duration timeout duration
* \param handler timeout callback
*/
virtual void schedule_timeout(Microseconds duration,
Timeout_handler &handler) = 0;
/**
* Tell the time source which scheduler to use for its own timeouts
*
* This method enables a time source for example to synchronize with an
* accurate but expensive timer only on a periodic basis while using a
* cheaper interpolation in general.
*/
Follow practices suggested by "Effective C++" The patch adjust the code of the base, base-<kernel>, and os repository. To adapt existing components to fix violations of the best practices suggested by "Effective C++" as reported by the -Weffc++ compiler argument. The changes follow the patterns outlined below: * A class with virtual functions can no longer publicly inherit base classed without a vtable. The inherited object may either be moved to a member variable, or inherited privately. The latter would be used for classes that inherit 'List::Element' or 'Avl_node'. In order to enable the 'List' and 'Avl_tree' to access the meta data, the 'List' must become a friend. * Instead of adding a virtual destructor to abstract base classes, we inherit the new 'Interface' class, which contains a virtual destructor. This way, single-line abstract base classes can stay as compact as they are now. The 'Interface' utility resides in base/include/util/interface.h. * With the new warnings enabled, all member variables must be explicitly initialized. Basic types may be initialized with '='. All other types are initialized with braces '{ ... }' or as class initializers. If basic types and non-basic types appear in a row, it is nice to only use the brace syntax (also for basic types) and align the braces. * If a class contains pointers as members, it must now also provide a copy constructor and assignment operator. In the most cases, one would make them private, effectively disallowing the objects to be copied. Unfortunately, this warning cannot be fixed be inheriting our existing 'Noncopyable' class (the compiler fails to detect that the inheriting class cannot be copied and still gives the error). For now, we have to manually add declarations for both the copy constructor and assignment operator as private class members. Those declarations should be prepended with a comment like this: /* * Noncopyable */ Thread(Thread const &); Thread &operator = (Thread const &); In the future, we should revisit these places and try to replace the pointers with references. In the presence of at least one reference member, the compiler would no longer implicitly generate a copy constructor. So we could remove the manual declaration. Issue #465
2017-12-21 15:42:15 +01:00
virtual void scheduler(Timeout_scheduler &) { };
os/timer: interpolate time via timestamps Previously, the Genode::Timer::curr_time always used the Timer_session::elapsed_ms RPC as back end. Now, Genode::Timer reads this remote time only in a periodic fashion independently from the calls to Genode::Timer::curr_time. If now one calls Genode::Timer::curr_time, the function takes the last read remote time value and adapts it using the timestamp difference since the remote-time read. The conversion factor from timestamps to time is estimated on every remote-time read using the last read remote-time value and the timestamp difference since the last remote time read. This commit also re-works the timeout test. The test now has two stages. In the first stage, it tests fast polling of the Genode::Timer::curr_time. This stage checks the error between locally interpolated and timer-driver time as well as wether the locally interpolated time is monotone and sufficiently homogeneous. In the second stage several periodic and one-shot timeouts are scheduled at once. This stage checks if the timeouts trigger sufficiently precise. This commit adds the new Kernel::time syscall to base-hw. The syscall is solely used by the Genode::Timer on base-hw as substitute for the timestamp. This is because on ARM, the timestamp function uses the ARM performance counter that stops counting when the WFI (wait for interrupt) instruction is active. This instruction, however is used by the base-hw idle contexts that get active when no user thread needs to be scheduled. Thus, the ARM performance counter is not a good choice for time interpolation and we use the kernel internal time instead. With this commit, the timeout library becomes a basic library. That means that it is linked against the LDSO which then provides it to the program it serves. Furthermore, you can't use the timeout library anymore without the LDSO because through the kernel-dependent LDSO make-files we can achieve a kernel-dependent timeout implementation. This commit introduces a structured Duration type that shall successively replace the use of Microseconds, Milliseconds, and integer types for duration values. Open issues: * The timeout test fails on Raspberry PI because of precision errors in the first stage. However, this does not render the framework unusable in general on the RPI but merely is an issue when speaking of microseconds precision. * If we run on ARM with another Kernel than HW the timestamp speed may continuously vary from almost 0 up to CPU speed. The Timer, however, only uses interpolation if the timestamp speed remained stable (12.5% tolerance) for at least 3 observation periods. Currently, one period is 100ms, so its 300ms. As long as this is not the case, Timer_session::elapsed_ms is called instead. Anyway, it might happen that the CPU load was stable for some time so interpolation becomes active and now the timestamp speed drops. In the worst case, we would now have 100ms of slowed down time. The bad thing about it would be, that this also affects the timeout of the period. Thus, it might "freeze" the local time for more than 100ms. On the other hand, if the timestamp speed suddenly raises after some stable time, interpolated time can get too fast. This would shorten the period but nonetheless may result in drifting away into the far future. Now we would have the problem that we can't deliver the real time anymore until it has caught up because the output of Timer::curr_time shall be monotone. So, effectively local time might "freeze" again for more than 100ms. It would be a solution to not use the Trace::timestamp on ARM w/o HW but a function whose return value causes the Timer to never use interpolation because of its stability policy. Fixes #2400
2017-04-22 00:52:23 +02:00
};
/**
* Interface of a time-source multiplexer
*
* Beside 'curr_time()', this abstract interface is used by the Timeout
* implementation only. Users of the timeout framework must schedule and
* discard timeouts via methods of the timeout.
*/
Follow practices suggested by "Effective C++" The patch adjust the code of the base, base-<kernel>, and os repository. To adapt existing components to fix violations of the best practices suggested by "Effective C++" as reported by the -Weffc++ compiler argument. The changes follow the patterns outlined below: * A class with virtual functions can no longer publicly inherit base classed without a vtable. The inherited object may either be moved to a member variable, or inherited privately. The latter would be used for classes that inherit 'List::Element' or 'Avl_node'. In order to enable the 'List' and 'Avl_tree' to access the meta data, the 'List' must become a friend. * Instead of adding a virtual destructor to abstract base classes, we inherit the new 'Interface' class, which contains a virtual destructor. This way, single-line abstract base classes can stay as compact as they are now. The 'Interface' utility resides in base/include/util/interface.h. * With the new warnings enabled, all member variables must be explicitly initialized. Basic types may be initialized with '='. All other types are initialized with braces '{ ... }' or as class initializers. If basic types and non-basic types appear in a row, it is nice to only use the brace syntax (also for basic types) and align the braces. * If a class contains pointers as members, it must now also provide a copy constructor and assignment operator. In the most cases, one would make them private, effectively disallowing the objects to be copied. Unfortunately, this warning cannot be fixed be inheriting our existing 'Noncopyable' class (the compiler fails to detect that the inheriting class cannot be copied and still gives the error). For now, we have to manually add declarations for both the copy constructor and assignment operator as private class members. Those declarations should be prepended with a comment like this: /* * Noncopyable */ Thread(Thread const &); Thread &operator = (Thread const &); In the future, we should revisit these places and try to replace the pointers with references. In the presence of at least one reference member, the compiler would no longer implicitly generate a copy constructor. So we could remove the manual declaration. Issue #465
2017-12-21 15:42:15 +01:00
class Genode::Timeout_scheduler : Interface
{
private:
friend Timeout;
/**
* Add a one-shot timeout to the schedule
*
* \param timeout timeout callback object
* \param duration timeout trigger delay
*/
virtual void _schedule_one_shot(Timeout &timeout, Microseconds duration) = 0;
/**
* Add a periodic timeout to the schedule
*
* \param timeout timeout callback object
* \param duration timeout trigger period
*/
virtual void _schedule_periodic(Timeout &timeout, Microseconds duration) = 0;
/**
* Remove timeout from the scheduler
*
* \param timeout corresponding timeout callback object
*/
virtual void _discard(Timeout &timeout) = 0;
public:
/**
* Read out the now time of the scheduler
*/
os/timer: interpolate time via timestamps Previously, the Genode::Timer::curr_time always used the Timer_session::elapsed_ms RPC as back end. Now, Genode::Timer reads this remote time only in a periodic fashion independently from the calls to Genode::Timer::curr_time. If now one calls Genode::Timer::curr_time, the function takes the last read remote time value and adapts it using the timestamp difference since the remote-time read. The conversion factor from timestamps to time is estimated on every remote-time read using the last read remote-time value and the timestamp difference since the last remote time read. This commit also re-works the timeout test. The test now has two stages. In the first stage, it tests fast polling of the Genode::Timer::curr_time. This stage checks the error between locally interpolated and timer-driver time as well as wether the locally interpolated time is monotone and sufficiently homogeneous. In the second stage several periodic and one-shot timeouts are scheduled at once. This stage checks if the timeouts trigger sufficiently precise. This commit adds the new Kernel::time syscall to base-hw. The syscall is solely used by the Genode::Timer on base-hw as substitute for the timestamp. This is because on ARM, the timestamp function uses the ARM performance counter that stops counting when the WFI (wait for interrupt) instruction is active. This instruction, however is used by the base-hw idle contexts that get active when no user thread needs to be scheduled. Thus, the ARM performance counter is not a good choice for time interpolation and we use the kernel internal time instead. With this commit, the timeout library becomes a basic library. That means that it is linked against the LDSO which then provides it to the program it serves. Furthermore, you can't use the timeout library anymore without the LDSO because through the kernel-dependent LDSO make-files we can achieve a kernel-dependent timeout implementation. This commit introduces a structured Duration type that shall successively replace the use of Microseconds, Milliseconds, and integer types for duration values. Open issues: * The timeout test fails on Raspberry PI because of precision errors in the first stage. However, this does not render the framework unusable in general on the RPI but merely is an issue when speaking of microseconds precision. * If we run on ARM with another Kernel than HW the timestamp speed may continuously vary from almost 0 up to CPU speed. The Timer, however, only uses interpolation if the timestamp speed remained stable (12.5% tolerance) for at least 3 observation periods. Currently, one period is 100ms, so its 300ms. As long as this is not the case, Timer_session::elapsed_ms is called instead. Anyway, it might happen that the CPU load was stable for some time so interpolation becomes active and now the timestamp speed drops. In the worst case, we would now have 100ms of slowed down time. The bad thing about it would be, that this also affects the timeout of the period. Thus, it might "freeze" the local time for more than 100ms. On the other hand, if the timestamp speed suddenly raises after some stable time, interpolated time can get too fast. This would shorten the period but nonetheless may result in drifting away into the far future. Now we would have the problem that we can't deliver the real time anymore until it has caught up because the output of Timer::curr_time shall be monotone. So, effectively local time might "freeze" again for more than 100ms. It would be a solution to not use the Trace::timestamp on ARM w/o HW but a function whose return value causes the Timer to never use interpolation because of its stability policy. Fixes #2400
2017-04-22 00:52:23 +02:00
virtual Duration curr_time() = 0;
};
/**
* Timeout callback that can be used for both one-shot and periodic timeouts
*
* This class should be used only if it is necessary to use one timeout
* callback for both periodic and one-shot timeouts. This is the case, for
* example, in a Timer-session server. If this is not the case, the classes
* Periodic_timeout and One_shot_timeout are the better choice.
*/
class Genode::Timeout : private Noncopyable
{
friend class Alarm_timeout_scheduler;
public:
/**
* Interface of a timeout handler
*/
Follow practices suggested by "Effective C++" The patch adjust the code of the base, base-<kernel>, and os repository. To adapt existing components to fix violations of the best practices suggested by "Effective C++" as reported by the -Weffc++ compiler argument. The changes follow the patterns outlined below: * A class with virtual functions can no longer publicly inherit base classed without a vtable. The inherited object may either be moved to a member variable, or inherited privately. The latter would be used for classes that inherit 'List::Element' or 'Avl_node'. In order to enable the 'List' and 'Avl_tree' to access the meta data, the 'List' must become a friend. * Instead of adding a virtual destructor to abstract base classes, we inherit the new 'Interface' class, which contains a virtual destructor. This way, single-line abstract base classes can stay as compact as they are now. The 'Interface' utility resides in base/include/util/interface.h. * With the new warnings enabled, all member variables must be explicitly initialized. Basic types may be initialized with '='. All other types are initialized with braces '{ ... }' or as class initializers. If basic types and non-basic types appear in a row, it is nice to only use the brace syntax (also for basic types) and align the braces. * If a class contains pointers as members, it must now also provide a copy constructor and assignment operator. In the most cases, one would make them private, effectively disallowing the objects to be copied. Unfortunately, this warning cannot be fixed be inheriting our existing 'Noncopyable' class (the compiler fails to detect that the inheriting class cannot be copied and still gives the error). For now, we have to manually add declarations for both the copy constructor and assignment operator as private class members. Those declarations should be prepended with a comment like this: /* * Noncopyable */ Thread(Thread const &); Thread &operator = (Thread const &); In the future, we should revisit these places and try to replace the pointers with references. In the presence of at least one reference member, the compiler would no longer implicitly generate a copy constructor. So we could remove the manual declaration. Issue #465
2017-12-21 15:42:15 +01:00
struct Handler : Interface
{
os/timer: interpolate time via timestamps Previously, the Genode::Timer::curr_time always used the Timer_session::elapsed_ms RPC as back end. Now, Genode::Timer reads this remote time only in a periodic fashion independently from the calls to Genode::Timer::curr_time. If now one calls Genode::Timer::curr_time, the function takes the last read remote time value and adapts it using the timestamp difference since the remote-time read. The conversion factor from timestamps to time is estimated on every remote-time read using the last read remote-time value and the timestamp difference since the last remote time read. This commit also re-works the timeout test. The test now has two stages. In the first stage, it tests fast polling of the Genode::Timer::curr_time. This stage checks the error between locally interpolated and timer-driver time as well as wether the locally interpolated time is monotone and sufficiently homogeneous. In the second stage several periodic and one-shot timeouts are scheduled at once. This stage checks if the timeouts trigger sufficiently precise. This commit adds the new Kernel::time syscall to base-hw. The syscall is solely used by the Genode::Timer on base-hw as substitute for the timestamp. This is because on ARM, the timestamp function uses the ARM performance counter that stops counting when the WFI (wait for interrupt) instruction is active. This instruction, however is used by the base-hw idle contexts that get active when no user thread needs to be scheduled. Thus, the ARM performance counter is not a good choice for time interpolation and we use the kernel internal time instead. With this commit, the timeout library becomes a basic library. That means that it is linked against the LDSO which then provides it to the program it serves. Furthermore, you can't use the timeout library anymore without the LDSO because through the kernel-dependent LDSO make-files we can achieve a kernel-dependent timeout implementation. This commit introduces a structured Duration type that shall successively replace the use of Microseconds, Milliseconds, and integer types for duration values. Open issues: * The timeout test fails on Raspberry PI because of precision errors in the first stage. However, this does not render the framework unusable in general on the RPI but merely is an issue when speaking of microseconds precision. * If we run on ARM with another Kernel than HW the timestamp speed may continuously vary from almost 0 up to CPU speed. The Timer, however, only uses interpolation if the timestamp speed remained stable (12.5% tolerance) for at least 3 observation periods. Currently, one period is 100ms, so its 300ms. As long as this is not the case, Timer_session::elapsed_ms is called instead. Anyway, it might happen that the CPU load was stable for some time so interpolation becomes active and now the timestamp speed drops. In the worst case, we would now have 100ms of slowed down time. The bad thing about it would be, that this also affects the timeout of the period. Thus, it might "freeze" the local time for more than 100ms. On the other hand, if the timestamp speed suddenly raises after some stable time, interpolated time can get too fast. This would shorten the period but nonetheless may result in drifting away into the far future. Now we would have the problem that we can't deliver the real time anymore until it has caught up because the output of Timer::curr_time shall be monotone. So, effectively local time might "freeze" again for more than 100ms. It would be a solution to not use the Trace::timestamp on ARM w/o HW but a function whose return value causes the Timer to never use interpolation because of its stability policy. Fixes #2400
2017-04-22 00:52:23 +02:00
virtual void handle_timeout(Duration curr_time) = 0;
};
private:
class Alarm
{
friend class Alarm_timeout_scheduler;
Follow practices suggested by "Effective C++" The patch adjust the code of the base, base-<kernel>, and os repository. To adapt existing components to fix violations of the best practices suggested by "Effective C++" as reported by the -Weffc++ compiler argument. The changes follow the patterns outlined below: * A class with virtual functions can no longer publicly inherit base classed without a vtable. The inherited object may either be moved to a member variable, or inherited privately. The latter would be used for classes that inherit 'List::Element' or 'Avl_node'. In order to enable the 'List' and 'Avl_tree' to access the meta data, the 'List' must become a friend. * Instead of adding a virtual destructor to abstract base classes, we inherit the new 'Interface' class, which contains a virtual destructor. This way, single-line abstract base classes can stay as compact as they are now. The 'Interface' utility resides in base/include/util/interface.h. * With the new warnings enabled, all member variables must be explicitly initialized. Basic types may be initialized with '='. All other types are initialized with braces '{ ... }' or as class initializers. If basic types and non-basic types appear in a row, it is nice to only use the brace syntax (also for basic types) and align the braces. * If a class contains pointers as members, it must now also provide a copy constructor and assignment operator. In the most cases, one would make them private, effectively disallowing the objects to be copied. Unfortunately, this warning cannot be fixed be inheriting our existing 'Noncopyable' class (the compiler fails to detect that the inheriting class cannot be copied and still gives the error). For now, we have to manually add declarations for both the copy constructor and assignment operator as private class members. Those declarations should be prepended with a comment like this: /* * Noncopyable */ Thread(Thread const &); Thread &operator = (Thread const &); In the future, we should revisit these places and try to replace the pointers with references. In the presence of at least one reference member, the compiler would no longer implicitly generate a copy constructor. So we could remove the manual declaration. Issue #465
2017-12-21 15:42:15 +01:00
private:
typedef uint64_t Time;
struct Raw
{
Time deadline;
bool deadline_period;
Time period;
bool is_pending_at(uint64_t time, bool time_period) const;
};
2020-02-19 16:26:40 +01:00
Mutex _dispatch_mutex { };
Raw _raw { };
int _active { 0 };
Alarm *_next { nullptr };
Alarm_timeout_scheduler *_scheduler { nullptr };
void _alarm_assign(Time period,
Time deadline,
bool deadline_period,
Alarm_timeout_scheduler *scheduler)
{
_raw.period = period;
_raw.deadline_period = deadline_period;
_raw.deadline = deadline;
_scheduler = scheduler;
}
void _alarm_reset() { _alarm_assign(0, 0, false, 0), _active = 0, _next = 0; }
bool _on_alarm(uint64_t);
Follow practices suggested by "Effective C++" The patch adjust the code of the base, base-<kernel>, and os repository. To adapt existing components to fix violations of the best practices suggested by "Effective C++" as reported by the -Weffc++ compiler argument. The changes follow the patterns outlined below: * A class with virtual functions can no longer publicly inherit base classed without a vtable. The inherited object may either be moved to a member variable, or inherited privately. The latter would be used for classes that inherit 'List::Element' or 'Avl_node'. In order to enable the 'List' and 'Avl_tree' to access the meta data, the 'List' must become a friend. * Instead of adding a virtual destructor to abstract base classes, we inherit the new 'Interface' class, which contains a virtual destructor. This way, single-line abstract base classes can stay as compact as they are now. The 'Interface' utility resides in base/include/util/interface.h. * With the new warnings enabled, all member variables must be explicitly initialized. Basic types may be initialized with '='. All other types are initialized with braces '{ ... }' or as class initializers. If basic types and non-basic types appear in a row, it is nice to only use the brace syntax (also for basic types) and align the braces. * If a class contains pointers as members, it must now also provide a copy constructor and assignment operator. In the most cases, one would make them private, effectively disallowing the objects to be copied. Unfortunately, this warning cannot be fixed be inheriting our existing 'Noncopyable' class (the compiler fails to detect that the inheriting class cannot be copied and still gives the error). For now, we have to manually add declarations for both the copy constructor and assignment operator as private class members. Those declarations should be prepended with a comment like this: /* * Noncopyable */ Thread(Thread const &); Thread &operator = (Thread const &); In the future, we should revisit these places and try to replace the pointers with references. In the presence of at least one reference member, the compiler would no longer implicitly generate a copy constructor. So we could remove the manual declaration. Issue #465
2017-12-21 15:42:15 +01:00
Alarm(Alarm const &);
Alarm &operator = (Alarm const &);
Follow practices suggested by "Effective C++" The patch adjust the code of the base, base-<kernel>, and os repository. To adapt existing components to fix violations of the best practices suggested by "Effective C++" as reported by the -Weffc++ compiler argument. The changes follow the patterns outlined below: * A class with virtual functions can no longer publicly inherit base classed without a vtable. The inherited object may either be moved to a member variable, or inherited privately. The latter would be used for classes that inherit 'List::Element' or 'Avl_node'. In order to enable the 'List' and 'Avl_tree' to access the meta data, the 'List' must become a friend. * Instead of adding a virtual destructor to abstract base classes, we inherit the new 'Interface' class, which contains a virtual destructor. This way, single-line abstract base classes can stay as compact as they are now. The 'Interface' utility resides in base/include/util/interface.h. * With the new warnings enabled, all member variables must be explicitly initialized. Basic types may be initialized with '='. All other types are initialized with braces '{ ... }' or as class initializers. If basic types and non-basic types appear in a row, it is nice to only use the brace syntax (also for basic types) and align the braces. * If a class contains pointers as members, it must now also provide a copy constructor and assignment operator. In the most cases, one would make them private, effectively disallowing the objects to be copied. Unfortunately, this warning cannot be fixed be inheriting our existing 'Noncopyable' class (the compiler fails to detect that the inheriting class cannot be copied and still gives the error). For now, we have to manually add declarations for both the copy constructor and assignment operator as private class members. Those declarations should be prepended with a comment like this: /* * Noncopyable */ Thread(Thread const &); Thread &operator = (Thread const &); In the future, we should revisit these places and try to replace the pointers with references. In the presence of at least one reference member, the compiler would no longer implicitly generate a copy constructor. So we could remove the manual declaration. Issue #465
2017-12-21 15:42:15 +01:00
public:
Follow practices suggested by "Effective C++" The patch adjust the code of the base, base-<kernel>, and os repository. To adapt existing components to fix violations of the best practices suggested by "Effective C++" as reported by the -Weffc++ compiler argument. The changes follow the patterns outlined below: * A class with virtual functions can no longer publicly inherit base classed without a vtable. The inherited object may either be moved to a member variable, or inherited privately. The latter would be used for classes that inherit 'List::Element' or 'Avl_node'. In order to enable the 'List' and 'Avl_tree' to access the meta data, the 'List' must become a friend. * Instead of adding a virtual destructor to abstract base classes, we inherit the new 'Interface' class, which contains a virtual destructor. This way, single-line abstract base classes can stay as compact as they are now. The 'Interface' utility resides in base/include/util/interface.h. * With the new warnings enabled, all member variables must be explicitly initialized. Basic types may be initialized with '='. All other types are initialized with braces '{ ... }' or as class initializers. If basic types and non-basic types appear in a row, it is nice to only use the brace syntax (also for basic types) and align the braces. * If a class contains pointers as members, it must now also provide a copy constructor and assignment operator. In the most cases, one would make them private, effectively disallowing the objects to be copied. Unfortunately, this warning cannot be fixed be inheriting our existing 'Noncopyable' class (the compiler fails to detect that the inheriting class cannot be copied and still gives the error). For now, we have to manually add declarations for both the copy constructor and assignment operator as private class members. Those declarations should be prepended with a comment like this: /* * Noncopyable */ Thread(Thread const &); Thread &operator = (Thread const &); In the future, we should revisit these places and try to replace the pointers with references. In the presence of at least one reference member, the compiler would no longer implicitly generate a copy constructor. So we could remove the manual declaration. Issue #465
2017-12-21 15:42:15 +01:00
Timeout_scheduler &timeout_scheduler;
Handler *handler = nullptr;
bool periodic = false;
Follow practices suggested by "Effective C++" The patch adjust the code of the base, base-<kernel>, and os repository. To adapt existing components to fix violations of the best practices suggested by "Effective C++" as reported by the -Weffc++ compiler argument. The changes follow the patterns outlined below: * A class with virtual functions can no longer publicly inherit base classed without a vtable. The inherited object may either be moved to a member variable, or inherited privately. The latter would be used for classes that inherit 'List::Element' or 'Avl_node'. In order to enable the 'List' and 'Avl_tree' to access the meta data, the 'List' must become a friend. * Instead of adding a virtual destructor to abstract base classes, we inherit the new 'Interface' class, which contains a virtual destructor. This way, single-line abstract base classes can stay as compact as they are now. The 'Interface' utility resides in base/include/util/interface.h. * With the new warnings enabled, all member variables must be explicitly initialized. Basic types may be initialized with '='. All other types are initialized with braces '{ ... }' or as class initializers. If basic types and non-basic types appear in a row, it is nice to only use the brace syntax (also for basic types) and align the braces. * If a class contains pointers as members, it must now also provide a copy constructor and assignment operator. In the most cases, one would make them private, effectively disallowing the objects to be copied. Unfortunately, this warning cannot be fixed be inheriting our existing 'Noncopyable' class (the compiler fails to detect that the inheriting class cannot be copied and still gives the error). For now, we have to manually add declarations for both the copy constructor and assignment operator as private class members. Those declarations should be prepended with a comment like this: /* * Noncopyable */ Thread(Thread const &); Thread &operator = (Thread const &); In the future, we should revisit these places and try to replace the pointers with references. In the presence of at least one reference member, the compiler would no longer implicitly generate a copy constructor. So we could remove the manual declaration. Issue #465
2017-12-21 15:42:15 +01:00
Alarm(Timeout_scheduler &timeout_scheduler)
: timeout_scheduler(timeout_scheduler) { _alarm_reset(); }
Follow practices suggested by "Effective C++" The patch adjust the code of the base, base-<kernel>, and os repository. To adapt existing components to fix violations of the best practices suggested by "Effective C++" as reported by the -Weffc++ compiler argument. The changes follow the patterns outlined below: * A class with virtual functions can no longer publicly inherit base classed without a vtable. The inherited object may either be moved to a member variable, or inherited privately. The latter would be used for classes that inherit 'List::Element' or 'Avl_node'. In order to enable the 'List' and 'Avl_tree' to access the meta data, the 'List' must become a friend. * Instead of adding a virtual destructor to abstract base classes, we inherit the new 'Interface' class, which contains a virtual destructor. This way, single-line abstract base classes can stay as compact as they are now. The 'Interface' utility resides in base/include/util/interface.h. * With the new warnings enabled, all member variables must be explicitly initialized. Basic types may be initialized with '='. All other types are initialized with braces '{ ... }' or as class initializers. If basic types and non-basic types appear in a row, it is nice to only use the brace syntax (also for basic types) and align the braces. * If a class contains pointers as members, it must now also provide a copy constructor and assignment operator. In the most cases, one would make them private, effectively disallowing the objects to be copied. Unfortunately, this warning cannot be fixed be inheriting our existing 'Noncopyable' class (the compiler fails to detect that the inheriting class cannot be copied and still gives the error). For now, we have to manually add declarations for both the copy constructor and assignment operator as private class members. Those declarations should be prepended with a comment like this: /* * Noncopyable */ Thread(Thread const &); Thread &operator = (Thread const &); In the future, we should revisit these places and try to replace the pointers with references. In the presence of at least one reference member, the compiler would no longer implicitly generate a copy constructor. So we could remove the manual declaration. Issue #465
2017-12-21 15:42:15 +01:00
virtual ~Alarm();
} _alarm;
public:
Timeout(Timeout_scheduler &timeout_scheduler)
: _alarm(timeout_scheduler) { }
~Timeout() { discard(); }
void schedule_periodic(Microseconds duration, Handler &handler);
void schedule_one_shot(Microseconds duration, Handler &handler);
void discard();
os/timer: interpolate time via timestamps Previously, the Genode::Timer::curr_time always used the Timer_session::elapsed_ms RPC as back end. Now, Genode::Timer reads this remote time only in a periodic fashion independently from the calls to Genode::Timer::curr_time. If now one calls Genode::Timer::curr_time, the function takes the last read remote time value and adapts it using the timestamp difference since the remote-time read. The conversion factor from timestamps to time is estimated on every remote-time read using the last read remote-time value and the timestamp difference since the last remote time read. This commit also re-works the timeout test. The test now has two stages. In the first stage, it tests fast polling of the Genode::Timer::curr_time. This stage checks the error between locally interpolated and timer-driver time as well as wether the locally interpolated time is monotone and sufficiently homogeneous. In the second stage several periodic and one-shot timeouts are scheduled at once. This stage checks if the timeouts trigger sufficiently precise. This commit adds the new Kernel::time syscall to base-hw. The syscall is solely used by the Genode::Timer on base-hw as substitute for the timestamp. This is because on ARM, the timestamp function uses the ARM performance counter that stops counting when the WFI (wait for interrupt) instruction is active. This instruction, however is used by the base-hw idle contexts that get active when no user thread needs to be scheduled. Thus, the ARM performance counter is not a good choice for time interpolation and we use the kernel internal time instead. With this commit, the timeout library becomes a basic library. That means that it is linked against the LDSO which then provides it to the program it serves. Furthermore, you can't use the timeout library anymore without the LDSO because through the kernel-dependent LDSO make-files we can achieve a kernel-dependent timeout implementation. This commit introduces a structured Duration type that shall successively replace the use of Microseconds, Milliseconds, and integer types for duration values. Open issues: * The timeout test fails on Raspberry PI because of precision errors in the first stage. However, this does not render the framework unusable in general on the RPI but merely is an issue when speaking of microseconds precision. * If we run on ARM with another Kernel than HW the timestamp speed may continuously vary from almost 0 up to CPU speed. The Timer, however, only uses interpolation if the timestamp speed remained stable (12.5% tolerance) for at least 3 observation periods. Currently, one period is 100ms, so its 300ms. As long as this is not the case, Timer_session::elapsed_ms is called instead. Anyway, it might happen that the CPU load was stable for some time so interpolation becomes active and now the timestamp speed drops. In the worst case, we would now have 100ms of slowed down time. The bad thing about it would be, that this also affects the timeout of the period. Thus, it might "freeze" the local time for more than 100ms. On the other hand, if the timestamp speed suddenly raises after some stable time, interpolated time can get too fast. This would shorten the period but nonetheless may result in drifting away into the far future. Now we would have the problem that we can't deliver the real time anymore until it has caught up because the output of Timer::curr_time shall be monotone. So, effectively local time might "freeze" again for more than 100ms. It would be a solution to not use the Trace::timestamp on ARM w/o HW but a function whose return value causes the Timer to never use interpolation because of its stability policy. Fixes #2400
2017-04-22 00:52:23 +02:00
bool scheduled() { return _alarm.handler != nullptr; }
};
/**
* Timeout-scheduler implementation using the Alarm framework
*/
class Genode::Alarm_timeout_scheduler : private Noncopyable,
public Timeout_scheduler,
public Time_source::Timeout_handler
{
os/timer: interpolate time via timestamps Previously, the Genode::Timer::curr_time always used the Timer_session::elapsed_ms RPC as back end. Now, Genode::Timer reads this remote time only in a periodic fashion independently from the calls to Genode::Timer::curr_time. If now one calls Genode::Timer::curr_time, the function takes the last read remote time value and adapts it using the timestamp difference since the remote-time read. The conversion factor from timestamps to time is estimated on every remote-time read using the last read remote-time value and the timestamp difference since the last remote time read. This commit also re-works the timeout test. The test now has two stages. In the first stage, it tests fast polling of the Genode::Timer::curr_time. This stage checks the error between locally interpolated and timer-driver time as well as wether the locally interpolated time is monotone and sufficiently homogeneous. In the second stage several periodic and one-shot timeouts are scheduled at once. This stage checks if the timeouts trigger sufficiently precise. This commit adds the new Kernel::time syscall to base-hw. The syscall is solely used by the Genode::Timer on base-hw as substitute for the timestamp. This is because on ARM, the timestamp function uses the ARM performance counter that stops counting when the WFI (wait for interrupt) instruction is active. This instruction, however is used by the base-hw idle contexts that get active when no user thread needs to be scheduled. Thus, the ARM performance counter is not a good choice for time interpolation and we use the kernel internal time instead. With this commit, the timeout library becomes a basic library. That means that it is linked against the LDSO which then provides it to the program it serves. Furthermore, you can't use the timeout library anymore without the LDSO because through the kernel-dependent LDSO make-files we can achieve a kernel-dependent timeout implementation. This commit introduces a structured Duration type that shall successively replace the use of Microseconds, Milliseconds, and integer types for duration values. Open issues: * The timeout test fails on Raspberry PI because of precision errors in the first stage. However, this does not render the framework unusable in general on the RPI but merely is an issue when speaking of microseconds precision. * If we run on ARM with another Kernel than HW the timestamp speed may continuously vary from almost 0 up to CPU speed. The Timer, however, only uses interpolation if the timestamp speed remained stable (12.5% tolerance) for at least 3 observation periods. Currently, one period is 100ms, so its 300ms. As long as this is not the case, Timer_session::elapsed_ms is called instead. Anyway, it might happen that the CPU load was stable for some time so interpolation becomes active and now the timestamp speed drops. In the worst case, we would now have 100ms of slowed down time. The bad thing about it would be, that this also affects the timeout of the period. Thus, it might "freeze" the local time for more than 100ms. On the other hand, if the timestamp speed suddenly raises after some stable time, interpolated time can get too fast. This would shorten the period but nonetheless may result in drifting away into the far future. Now we would have the problem that we can't deliver the real time anymore until it has caught up because the output of Timer::curr_time shall be monotone. So, effectively local time might "freeze" again for more than 100ms. It would be a solution to not use the Trace::timestamp on ARM w/o HW but a function whose return value causes the Timer to never use interpolation because of its stability policy. Fixes #2400
2017-04-22 00:52:23 +02:00
friend class Timer::Connection;
friend class Timer::Root_component;
friend class Timeout::Alarm;
os/timer: interpolate time via timestamps Previously, the Genode::Timer::curr_time always used the Timer_session::elapsed_ms RPC as back end. Now, Genode::Timer reads this remote time only in a periodic fashion independently from the calls to Genode::Timer::curr_time. If now one calls Genode::Timer::curr_time, the function takes the last read remote time value and adapts it using the timestamp difference since the remote-time read. The conversion factor from timestamps to time is estimated on every remote-time read using the last read remote-time value and the timestamp difference since the last remote time read. This commit also re-works the timeout test. The test now has two stages. In the first stage, it tests fast polling of the Genode::Timer::curr_time. This stage checks the error between locally interpolated and timer-driver time as well as wether the locally interpolated time is monotone and sufficiently homogeneous. In the second stage several periodic and one-shot timeouts are scheduled at once. This stage checks if the timeouts trigger sufficiently precise. This commit adds the new Kernel::time syscall to base-hw. The syscall is solely used by the Genode::Timer on base-hw as substitute for the timestamp. This is because on ARM, the timestamp function uses the ARM performance counter that stops counting when the WFI (wait for interrupt) instruction is active. This instruction, however is used by the base-hw idle contexts that get active when no user thread needs to be scheduled. Thus, the ARM performance counter is not a good choice for time interpolation and we use the kernel internal time instead. With this commit, the timeout library becomes a basic library. That means that it is linked against the LDSO which then provides it to the program it serves. Furthermore, you can't use the timeout library anymore without the LDSO because through the kernel-dependent LDSO make-files we can achieve a kernel-dependent timeout implementation. This commit introduces a structured Duration type that shall successively replace the use of Microseconds, Milliseconds, and integer types for duration values. Open issues: * The timeout test fails on Raspberry PI because of precision errors in the first stage. However, this does not render the framework unusable in general on the RPI but merely is an issue when speaking of microseconds precision. * If we run on ARM with another Kernel than HW the timestamp speed may continuously vary from almost 0 up to CPU speed. The Timer, however, only uses interpolation if the timestamp speed remained stable (12.5% tolerance) for at least 3 observation periods. Currently, one period is 100ms, so its 300ms. As long as this is not the case, Timer_session::elapsed_ms is called instead. Anyway, it might happen that the CPU load was stable for some time so interpolation becomes active and now the timestamp speed drops. In the worst case, we would now have 100ms of slowed down time. The bad thing about it would be, that this also affects the timeout of the period. Thus, it might "freeze" the local time for more than 100ms. On the other hand, if the timestamp speed suddenly raises after some stable time, interpolated time can get too fast. This would shorten the period but nonetheless may result in drifting away into the far future. Now we would have the problem that we can't deliver the real time anymore until it has caught up because the output of Timer::curr_time shall be monotone. So, effectively local time might "freeze" again for more than 100ms. It would be a solution to not use the Trace::timestamp on ARM w/o HW but a function whose return value causes the Timer to never use interpolation because of its stability policy. Fixes #2400
2017-04-22 00:52:23 +02:00
private:
using Alarm = Timeout::Alarm;
Time_source &_time_source;
2020-02-19 16:26:40 +01:00
Mutex _mutex { };
Alarm *_active_head { nullptr };
Alarm *_pending_head { nullptr };
Alarm::Time _now { 0UL };
bool _now_period { false };
Alarm::Raw _min_handle_period { };
void _alarm_unsynchronized_enqueue(Alarm *alarm);
void _alarm_unsynchronized_dequeue(Alarm *alarm);
Alarm *_alarm_get_pending_alarm();
void _alarm_setup_alarm(Alarm &alarm, Alarm::Time period, Alarm::Time first_duration);
os/timer: interpolate time via timestamps Previously, the Genode::Timer::curr_time always used the Timer_session::elapsed_ms RPC as back end. Now, Genode::Timer reads this remote time only in a periodic fashion independently from the calls to Genode::Timer::curr_time. If now one calls Genode::Timer::curr_time, the function takes the last read remote time value and adapts it using the timestamp difference since the remote-time read. The conversion factor from timestamps to time is estimated on every remote-time read using the last read remote-time value and the timestamp difference since the last remote time read. This commit also re-works the timeout test. The test now has two stages. In the first stage, it tests fast polling of the Genode::Timer::curr_time. This stage checks the error between locally interpolated and timer-driver time as well as wether the locally interpolated time is monotone and sufficiently homogeneous. In the second stage several periodic and one-shot timeouts are scheduled at once. This stage checks if the timeouts trigger sufficiently precise. This commit adds the new Kernel::time syscall to base-hw. The syscall is solely used by the Genode::Timer on base-hw as substitute for the timestamp. This is because on ARM, the timestamp function uses the ARM performance counter that stops counting when the WFI (wait for interrupt) instruction is active. This instruction, however is used by the base-hw idle contexts that get active when no user thread needs to be scheduled. Thus, the ARM performance counter is not a good choice for time interpolation and we use the kernel internal time instead. With this commit, the timeout library becomes a basic library. That means that it is linked against the LDSO which then provides it to the program it serves. Furthermore, you can't use the timeout library anymore without the LDSO because through the kernel-dependent LDSO make-files we can achieve a kernel-dependent timeout implementation. This commit introduces a structured Duration type that shall successively replace the use of Microseconds, Milliseconds, and integer types for duration values. Open issues: * The timeout test fails on Raspberry PI because of precision errors in the first stage. However, this does not render the framework unusable in general on the RPI but merely is an issue when speaking of microseconds precision. * If we run on ARM with another Kernel than HW the timestamp speed may continuously vary from almost 0 up to CPU speed. The Timer, however, only uses interpolation if the timestamp speed remained stable (12.5% tolerance) for at least 3 observation periods. Currently, one period is 100ms, so its 300ms. As long as this is not the case, Timer_session::elapsed_ms is called instead. Anyway, it might happen that the CPU load was stable for some time so interpolation becomes active and now the timestamp speed drops. In the worst case, we would now have 100ms of slowed down time. The bad thing about it would be, that this also affects the timeout of the period. Thus, it might "freeze" the local time for more than 100ms. On the other hand, if the timestamp speed suddenly raises after some stable time, interpolated time can get too fast. This would shorten the period but nonetheless may result in drifting away into the far future. Now we would have the problem that we can't deliver the real time anymore until it has caught up because the output of Timer::curr_time shall be monotone. So, effectively local time might "freeze" again for more than 100ms. It would be a solution to not use the Trace::timestamp on ARM w/o HW but a function whose return value causes the Timer to never use interpolation because of its stability policy. Fixes #2400
2017-04-22 00:52:23 +02:00
void _enable();
/**********************************
** Time_source::Timeout_handler **
**********************************/
os/timer: interpolate time via timestamps Previously, the Genode::Timer::curr_time always used the Timer_session::elapsed_ms RPC as back end. Now, Genode::Timer reads this remote time only in a periodic fashion independently from the calls to Genode::Timer::curr_time. If now one calls Genode::Timer::curr_time, the function takes the last read remote time value and adapts it using the timestamp difference since the remote-time read. The conversion factor from timestamps to time is estimated on every remote-time read using the last read remote-time value and the timestamp difference since the last remote time read. This commit also re-works the timeout test. The test now has two stages. In the first stage, it tests fast polling of the Genode::Timer::curr_time. This stage checks the error between locally interpolated and timer-driver time as well as wether the locally interpolated time is monotone and sufficiently homogeneous. In the second stage several periodic and one-shot timeouts are scheduled at once. This stage checks if the timeouts trigger sufficiently precise. This commit adds the new Kernel::time syscall to base-hw. The syscall is solely used by the Genode::Timer on base-hw as substitute for the timestamp. This is because on ARM, the timestamp function uses the ARM performance counter that stops counting when the WFI (wait for interrupt) instruction is active. This instruction, however is used by the base-hw idle contexts that get active when no user thread needs to be scheduled. Thus, the ARM performance counter is not a good choice for time interpolation and we use the kernel internal time instead. With this commit, the timeout library becomes a basic library. That means that it is linked against the LDSO which then provides it to the program it serves. Furthermore, you can't use the timeout library anymore without the LDSO because through the kernel-dependent LDSO make-files we can achieve a kernel-dependent timeout implementation. This commit introduces a structured Duration type that shall successively replace the use of Microseconds, Milliseconds, and integer types for duration values. Open issues: * The timeout test fails on Raspberry PI because of precision errors in the first stage. However, this does not render the framework unusable in general on the RPI but merely is an issue when speaking of microseconds precision. * If we run on ARM with another Kernel than HW the timestamp speed may continuously vary from almost 0 up to CPU speed. The Timer, however, only uses interpolation if the timestamp speed remained stable (12.5% tolerance) for at least 3 observation periods. Currently, one period is 100ms, so its 300ms. As long as this is not the case, Timer_session::elapsed_ms is called instead. Anyway, it might happen that the CPU load was stable for some time so interpolation becomes active and now the timestamp speed drops. In the worst case, we would now have 100ms of slowed down time. The bad thing about it would be, that this also affects the timeout of the period. Thus, it might "freeze" the local time for more than 100ms. On the other hand, if the timestamp speed suddenly raises after some stable time, interpolated time can get too fast. This would shorten the period but nonetheless may result in drifting away into the far future. Now we would have the problem that we can't deliver the real time anymore until it has caught up because the output of Timer::curr_time shall be monotone. So, effectively local time might "freeze" again for more than 100ms. It would be a solution to not use the Trace::timestamp on ARM w/o HW but a function whose return value causes the Timer to never use interpolation because of its stability policy. Fixes #2400
2017-04-22 00:52:23 +02:00
void handle_timeout(Duration curr_time) override;
/***********************
** Timeout_scheduler **
***********************/
void _schedule_one_shot(Timeout &timeout, Microseconds duration) override;
void _schedule_periodic(Timeout &timeout, Microseconds duration) override;
void _discard(Timeout &timeout) override {
_alarm_discard(&timeout._alarm); }
void _alarm_discard(Alarm *alarm);
void _alarm_schedule_absolute(Alarm *alarm, Alarm::Time duration);
void _alarm_schedule(Alarm *alarm, Alarm::Time period);
void _alarm_handle(Alarm::Time now);
bool _alarm_next_deadline(Alarm::Time *deadline);
bool _alarm_head_timeout(const Alarm * alarm) { return _active_head == alarm; }
Alarm_timeout_scheduler(Alarm_timeout_scheduler const &);
Alarm_timeout_scheduler &operator = (Alarm_timeout_scheduler const &);
public:
Alarm_timeout_scheduler(Time_source &time_source,
Microseconds min_handle_period = Microseconds(1));
~Alarm_timeout_scheduler();
/***********************
** Timeout_scheduler **
***********************/
os/timer: interpolate time via timestamps Previously, the Genode::Timer::curr_time always used the Timer_session::elapsed_ms RPC as back end. Now, Genode::Timer reads this remote time only in a periodic fashion independently from the calls to Genode::Timer::curr_time. If now one calls Genode::Timer::curr_time, the function takes the last read remote time value and adapts it using the timestamp difference since the remote-time read. The conversion factor from timestamps to time is estimated on every remote-time read using the last read remote-time value and the timestamp difference since the last remote time read. This commit also re-works the timeout test. The test now has two stages. In the first stage, it tests fast polling of the Genode::Timer::curr_time. This stage checks the error between locally interpolated and timer-driver time as well as wether the locally interpolated time is monotone and sufficiently homogeneous. In the second stage several periodic and one-shot timeouts are scheduled at once. This stage checks if the timeouts trigger sufficiently precise. This commit adds the new Kernel::time syscall to base-hw. The syscall is solely used by the Genode::Timer on base-hw as substitute for the timestamp. This is because on ARM, the timestamp function uses the ARM performance counter that stops counting when the WFI (wait for interrupt) instruction is active. This instruction, however is used by the base-hw idle contexts that get active when no user thread needs to be scheduled. Thus, the ARM performance counter is not a good choice for time interpolation and we use the kernel internal time instead. With this commit, the timeout library becomes a basic library. That means that it is linked against the LDSO which then provides it to the program it serves. Furthermore, you can't use the timeout library anymore without the LDSO because through the kernel-dependent LDSO make-files we can achieve a kernel-dependent timeout implementation. This commit introduces a structured Duration type that shall successively replace the use of Microseconds, Milliseconds, and integer types for duration values. Open issues: * The timeout test fails on Raspberry PI because of precision errors in the first stage. However, this does not render the framework unusable in general on the RPI but merely is an issue when speaking of microseconds precision. * If we run on ARM with another Kernel than HW the timestamp speed may continuously vary from almost 0 up to CPU speed. The Timer, however, only uses interpolation if the timestamp speed remained stable (12.5% tolerance) for at least 3 observation periods. Currently, one period is 100ms, so its 300ms. As long as this is not the case, Timer_session::elapsed_ms is called instead. Anyway, it might happen that the CPU load was stable for some time so interpolation becomes active and now the timestamp speed drops. In the worst case, we would now have 100ms of slowed down time. The bad thing about it would be, that this also affects the timeout of the period. Thus, it might "freeze" the local time for more than 100ms. On the other hand, if the timestamp speed suddenly raises after some stable time, interpolated time can get too fast. This would shorten the period but nonetheless may result in drifting away into the far future. Now we would have the problem that we can't deliver the real time anymore until it has caught up because the output of Timer::curr_time shall be monotone. So, effectively local time might "freeze" again for more than 100ms. It would be a solution to not use the Trace::timestamp on ARM w/o HW but a function whose return value causes the Timer to never use interpolation because of its stability policy. Fixes #2400
2017-04-22 00:52:23 +02:00
Duration curr_time() override { return _time_source.curr_time(); }
};
os/timer: interpolate time via timestamps Previously, the Genode::Timer::curr_time always used the Timer_session::elapsed_ms RPC as back end. Now, Genode::Timer reads this remote time only in a periodic fashion independently from the calls to Genode::Timer::curr_time. If now one calls Genode::Timer::curr_time, the function takes the last read remote time value and adapts it using the timestamp difference since the remote-time read. The conversion factor from timestamps to time is estimated on every remote-time read using the last read remote-time value and the timestamp difference since the last remote time read. This commit also re-works the timeout test. The test now has two stages. In the first stage, it tests fast polling of the Genode::Timer::curr_time. This stage checks the error between locally interpolated and timer-driver time as well as wether the locally interpolated time is monotone and sufficiently homogeneous. In the second stage several periodic and one-shot timeouts are scheduled at once. This stage checks if the timeouts trigger sufficiently precise. This commit adds the new Kernel::time syscall to base-hw. The syscall is solely used by the Genode::Timer on base-hw as substitute for the timestamp. This is because on ARM, the timestamp function uses the ARM performance counter that stops counting when the WFI (wait for interrupt) instruction is active. This instruction, however is used by the base-hw idle contexts that get active when no user thread needs to be scheduled. Thus, the ARM performance counter is not a good choice for time interpolation and we use the kernel internal time instead. With this commit, the timeout library becomes a basic library. That means that it is linked against the LDSO which then provides it to the program it serves. Furthermore, you can't use the timeout library anymore without the LDSO because through the kernel-dependent LDSO make-files we can achieve a kernel-dependent timeout implementation. This commit introduces a structured Duration type that shall successively replace the use of Microseconds, Milliseconds, and integer types for duration values. Open issues: * The timeout test fails on Raspberry PI because of precision errors in the first stage. However, this does not render the framework unusable in general on the RPI but merely is an issue when speaking of microseconds precision. * If we run on ARM with another Kernel than HW the timestamp speed may continuously vary from almost 0 up to CPU speed. The Timer, however, only uses interpolation if the timestamp speed remained stable (12.5% tolerance) for at least 3 observation periods. Currently, one period is 100ms, so its 300ms. As long as this is not the case, Timer_session::elapsed_ms is called instead. Anyway, it might happen that the CPU load was stable for some time so interpolation becomes active and now the timestamp speed drops. In the worst case, we would now have 100ms of slowed down time. The bad thing about it would be, that this also affects the timeout of the period. Thus, it might "freeze" the local time for more than 100ms. On the other hand, if the timestamp speed suddenly raises after some stable time, interpolated time can get too fast. This would shorten the period but nonetheless may result in drifting away into the far future. Now we would have the problem that we can't deliver the real time anymore until it has caught up because the output of Timer::curr_time shall be monotone. So, effectively local time might "freeze" again for more than 100ms. It would be a solution to not use the Trace::timestamp on ARM w/o HW but a function whose return value causes the Timer to never use interpolation because of its stability policy. Fixes #2400
2017-04-22 00:52:23 +02:00
#endif /* _TIMER__TIMEOUT_H_ */