genode/repos/ports/run/noux_gdb.run

230 lines
6.4 KiB
Plaintext
Raw Normal View History

if {![have_spec foc] || ![have_spec 32bit]} {
puts "\nThe Noux GDB scenario is supported on 32-bit Fiasco.OC only\n"
exit 0
}
source ${genode_dir}/repos/ports/run/noux_gdb.inc
cli_monitor: add a 'gdb' command This patch adds a 'gdb' command to 'cli_monitor', which makes it possible to debug an application with GDB. The command works similarly to the 'start' command, but instead of starting the subsystem binary directly, an 'init' subsystem gets started, which then starts 'terminal_crosslink', 'noux', GDB and 'gdb_monitor' (which starts the application binary as its target). So, for the 'gdb' command to work, these additional components need to be available, too. 'terminal_crosslink', 'noux', 'gdb_monitor' and the file 'gdb_command_config' are expected to be ROM modules. The Noux GDB client needs to get mounted at '/bin' in Noux and the target binaries need to be available as ROM modules (loaded by 'gdb_monitor') and also mounted at '/gdb' in Noux (loaded by the GDB client). Additionally, the source code of the target application can be provided at '/gdb/src/ in Noux. How the Noux mountings get established can be configured in the 'gdb_command_config' file. The default configuration in 'os/src/server/cli_monitor/gdb_command_config' mounts GDB from a tar archive named 'gdb.tar', the GDB target binaries from a tar archive named 'gdb_target.tar' and the target source code from a tar archive named 'gdb_target-src.tar'. The patch includes an 'expect' include file (ports/run/noux_gdb.inc) which provides functions that help to create those tar files: - 'create_gdb_tar' creates a tar archive for the 'gdb' client - 'create_binary_tar' creates a tar archive for the target application - 'create_source_tar' creates a tar archive for the source code of the target application - 'create_binary_and_source_tars' is a convenience wrapper for the previous two functions The patch also includes an example run script (ports/run/noux_gdb_dynamic.run). The 'gdb' command supports the following command line options: - --ram: the initial RAM quota provided to the whole subsystem (including the GDB-related components) - --ram-limit: limit for expanding RAM quota - --gdb-ram-preserve: the RAM quota that 'gdb_monitor' ahould preserve for itself Fixes #928.
2013-10-25 22:28:55 +02:00
if {[have_spec arm]} {
set tool_prefix "genode-arm-"
}
if {[have_spec x86]} {
set tool_prefix "genode-x86-"
}
#
# Uncomment the following line when working on the GDB source code. Otherwise,
# the package may get recompiled, yet it does not get reinstalled into 'bin/'.
#
cli_monitor: add a 'gdb' command This patch adds a 'gdb' command to 'cli_monitor', which makes it possible to debug an application with GDB. The command works similarly to the 'start' command, but instead of starting the subsystem binary directly, an 'init' subsystem gets started, which then starts 'terminal_crosslink', 'noux', GDB and 'gdb_monitor' (which starts the application binary as its target). So, for the 'gdb' command to work, these additional components need to be available, too. 'terminal_crosslink', 'noux', 'gdb_monitor' and the file 'gdb_command_config' are expected to be ROM modules. The Noux GDB client needs to get mounted at '/bin' in Noux and the target binaries need to be available as ROM modules (loaded by 'gdb_monitor') and also mounted at '/gdb' in Noux (loaded by the GDB client). Additionally, the source code of the target application can be provided at '/gdb/src/ in Noux. How the Noux mountings get established can be configured in the 'gdb_command_config' file. The default configuration in 'os/src/server/cli_monitor/gdb_command_config' mounts GDB from a tar archive named 'gdb.tar', the GDB target binaries from a tar archive named 'gdb_target.tar' and the target source code from a tar archive named 'gdb_target-src.tar'. The patch includes an 'expect' include file (ports/run/noux_gdb.inc) which provides functions that help to create those tar files: - 'create_gdb_tar' creates a tar archive for the 'gdb' client - 'create_binary_tar' creates a tar archive for the target application - 'create_source_tar' creates a tar archive for the source code of the target application - 'create_binary_and_source_tars' is a convenience wrapper for the previous two functions The patch also includes an example run script (ports/run/noux_gdb_dynamic.run). The 'gdb' command supports the following command line options: - --ram: the initial RAM quota provided to the whole subsystem (including the GDB-related components) - --ram-limit: limit for expanding RAM quota - --gdb-ram-preserve: the RAM quota that 'gdb_monitor' ahould preserve for itself Fixes #928.
2013-10-25 22:28:55 +02:00
#exec rm -rf noux-pkg/[noux_gdb_pkg_name]/ bin/[noux_gdb_pkg_name]/
set build_components {
core init drivers/timer noux lib/libc_noux
drivers/framebuffer drivers/pci drivers/input drivers/usb
server/terminal server/terminal_crosslink
cli_monitor: add a 'gdb' command This patch adds a 'gdb' command to 'cli_monitor', which makes it possible to debug an application with GDB. The command works similarly to the 'start' command, but instead of starting the subsystem binary directly, an 'init' subsystem gets started, which then starts 'terminal_crosslink', 'noux', GDB and 'gdb_monitor' (which starts the application binary as its target). So, for the 'gdb' command to work, these additional components need to be available, too. 'terminal_crosslink', 'noux', 'gdb_monitor' and the file 'gdb_command_config' are expected to be ROM modules. The Noux GDB client needs to get mounted at '/bin' in Noux and the target binaries need to be available as ROM modules (loaded by 'gdb_monitor') and also mounted at '/gdb' in Noux (loaded by the GDB client). Additionally, the source code of the target application can be provided at '/gdb/src/ in Noux. How the Noux mountings get established can be configured in the 'gdb_command_config' file. The default configuration in 'os/src/server/cli_monitor/gdb_command_config' mounts GDB from a tar archive named 'gdb.tar', the GDB target binaries from a tar archive named 'gdb_target.tar' and the target source code from a tar archive named 'gdb_target-src.tar'. The patch includes an 'expect' include file (ports/run/noux_gdb.inc) which provides functions that help to create those tar files: - 'create_gdb_tar' creates a tar archive for the 'gdb' client - 'create_binary_tar' creates a tar archive for the target application - 'create_source_tar' creates a tar archive for the source code of the target application - 'create_binary_and_source_tars' is a convenience wrapper for the previous two functions The patch also includes an example run script (ports/run/noux_gdb_dynamic.run). The 'gdb' command supports the following command line options: - --ram: the initial RAM quota provided to the whole subsystem (including the GDB-related components) - --ram-limit: limit for expanding RAM quota - --gdb-ram-preserve: the RAM quota that 'gdb_monitor' ahould preserve for itself Fixes #928.
2013-10-25 22:28:55 +02:00
app/gdb_monitor
}
lappend_if [have_spec gpio] build_components drivers/gpio
cli_monitor: add a 'gdb' command This patch adds a 'gdb' command to 'cli_monitor', which makes it possible to debug an application with GDB. The command works similarly to the 'start' command, but instead of starting the subsystem binary directly, an 'init' subsystem gets started, which then starts 'terminal_crosslink', 'noux', GDB and 'gdb_monitor' (which starts the application binary as its target). So, for the 'gdb' command to work, these additional components need to be available, too. 'terminal_crosslink', 'noux', 'gdb_monitor' and the file 'gdb_command_config' are expected to be ROM modules. The Noux GDB client needs to get mounted at '/bin' in Noux and the target binaries need to be available as ROM modules (loaded by 'gdb_monitor') and also mounted at '/gdb' in Noux (loaded by the GDB client). Additionally, the source code of the target application can be provided at '/gdb/src/ in Noux. How the Noux mountings get established can be configured in the 'gdb_command_config' file. The default configuration in 'os/src/server/cli_monitor/gdb_command_config' mounts GDB from a tar archive named 'gdb.tar', the GDB target binaries from a tar archive named 'gdb_target.tar' and the target source code from a tar archive named 'gdb_target-src.tar'. The patch includes an 'expect' include file (ports/run/noux_gdb.inc) which provides functions that help to create those tar files: - 'create_gdb_tar' creates a tar archive for the 'gdb' client - 'create_binary_tar' creates a tar archive for the target application - 'create_source_tar' creates a tar archive for the source code of the target application - 'create_binary_and_source_tars' is a convenience wrapper for the previous two functions The patch also includes an example run script (ports/run/noux_gdb_dynamic.run). The 'gdb' command supports the following command line options: - --ram: the initial RAM quota provided to the whole subsystem (including the GDB-related components) - --ram-limit: limit for expanding RAM quota - --gdb-ram-preserve: the RAM quota that 'gdb_monitor' ahould preserve for itself Fixes #928.
2013-10-25 22:28:55 +02:00
lappend build_components noux-pkg/[noux_gdb_pkg_name]
cli_monitor: add a 'gdb' command This patch adds a 'gdb' command to 'cli_monitor', which makes it possible to debug an application with GDB. The command works similarly to the 'start' command, but instead of starting the subsystem binary directly, an 'init' subsystem gets started, which then starts 'terminal_crosslink', 'noux', GDB and 'gdb_monitor' (which starts the application binary as its target). So, for the 'gdb' command to work, these additional components need to be available, too. 'terminal_crosslink', 'noux', 'gdb_monitor' and the file 'gdb_command_config' are expected to be ROM modules. The Noux GDB client needs to get mounted at '/bin' in Noux and the target binaries need to be available as ROM modules (loaded by 'gdb_monitor') and also mounted at '/gdb' in Noux (loaded by the GDB client). Additionally, the source code of the target application can be provided at '/gdb/src/ in Noux. How the Noux mountings get established can be configured in the 'gdb_command_config' file. The default configuration in 'os/src/server/cli_monitor/gdb_command_config' mounts GDB from a tar archive named 'gdb.tar', the GDB target binaries from a tar archive named 'gdb_target.tar' and the target source code from a tar archive named 'gdb_target-src.tar'. The patch includes an 'expect' include file (ports/run/noux_gdb.inc) which provides functions that help to create those tar files: - 'create_gdb_tar' creates a tar archive for the 'gdb' client - 'create_binary_tar' creates a tar archive for the target application - 'create_source_tar' creates a tar archive for the source code of the target application - 'create_binary_and_source_tars' is a convenience wrapper for the previous two functions The patch also includes an example run script (ports/run/noux_gdb_dynamic.run). The 'gdb' command supports the following command line options: - --ram: the initial RAM quota provided to the whole subsystem (including the GDB-related components) - --ram-limit: limit for expanding RAM quota - --gdb-ram-preserve: the RAM quota that 'gdb_monitor' ahould preserve for itself Fixes #928.
2013-10-25 22:28:55 +02:00
# the application to be debugged with GDB
lappend build_components test/gdb_monitor
set gdb_target_binary_name test-gdb_monitor
cli_monitor: add a 'gdb' command This patch adds a 'gdb' command to 'cli_monitor', which makes it possible to debug an application with GDB. The command works similarly to the 'start' command, but instead of starting the subsystem binary directly, an 'init' subsystem gets started, which then starts 'terminal_crosslink', 'noux', GDB and 'gdb_monitor' (which starts the application binary as its target). So, for the 'gdb' command to work, these additional components need to be available, too. 'terminal_crosslink', 'noux', 'gdb_monitor' and the file 'gdb_command_config' are expected to be ROM modules. The Noux GDB client needs to get mounted at '/bin' in Noux and the target binaries need to be available as ROM modules (loaded by 'gdb_monitor') and also mounted at '/gdb' in Noux (loaded by the GDB client). Additionally, the source code of the target application can be provided at '/gdb/src/ in Noux. How the Noux mountings get established can be configured in the 'gdb_command_config' file. The default configuration in 'os/src/server/cli_monitor/gdb_command_config' mounts GDB from a tar archive named 'gdb.tar', the GDB target binaries from a tar archive named 'gdb_target.tar' and the target source code from a tar archive named 'gdb_target-src.tar'. The patch includes an 'expect' include file (ports/run/noux_gdb.inc) which provides functions that help to create those tar files: - 'create_gdb_tar' creates a tar archive for the 'gdb' client - 'create_binary_tar' creates a tar archive for the target application - 'create_source_tar' creates a tar archive for the source code of the target application - 'create_binary_and_source_tars' is a convenience wrapper for the previous two functions The patch also includes an example run script (ports/run/noux_gdb_dynamic.run). The 'gdb' command supports the following command line options: - --ram: the initial RAM quota provided to the whole subsystem (including the GDB-related components) - --ram-limit: limit for expanding RAM quota - --gdb-ram-preserve: the RAM quota that 'gdb_monitor' ahould preserve for itself Fixes #928.
2013-10-25 22:28:55 +02:00
build $build_components
# names of the binaries needed for the GDB monitor test
cli_monitor: add a 'gdb' command This patch adds a 'gdb' command to 'cli_monitor', which makes it possible to debug an application with GDB. The command works similarly to the 'start' command, but instead of starting the subsystem binary directly, an 'init' subsystem gets started, which then starts 'terminal_crosslink', 'noux', GDB and 'gdb_monitor' (which starts the application binary as its target). So, for the 'gdb' command to work, these additional components need to be available, too. 'terminal_crosslink', 'noux', 'gdb_monitor' and the file 'gdb_command_config' are expected to be ROM modules. The Noux GDB client needs to get mounted at '/bin' in Noux and the target binaries need to be available as ROM modules (loaded by 'gdb_monitor') and also mounted at '/gdb' in Noux (loaded by the GDB client). Additionally, the source code of the target application can be provided at '/gdb/src/ in Noux. How the Noux mountings get established can be configured in the 'gdb_command_config' file. The default configuration in 'os/src/server/cli_monitor/gdb_command_config' mounts GDB from a tar archive named 'gdb.tar', the GDB target binaries from a tar archive named 'gdb_target.tar' and the target source code from a tar archive named 'gdb_target-src.tar'. The patch includes an 'expect' include file (ports/run/noux_gdb.inc) which provides functions that help to create those tar files: - 'create_gdb_tar' creates a tar archive for the 'gdb' client - 'create_binary_tar' creates a tar archive for the target application - 'create_source_tar' creates a tar archive for the source code of the target application - 'create_binary_and_source_tars' is a convenience wrapper for the previous two functions The patch also includes an example run script (ports/run/noux_gdb_dynamic.run). The 'gdb' command supports the following command line options: - --ram: the initial RAM quota provided to the whole subsystem (including the GDB-related components) - --ram-limit: limit for expanding RAM quota - --gdb-ram-preserve: the RAM quota that 'gdb_monitor' ahould preserve for itself Fixes #928.
2013-10-25 22:28:55 +02:00
set gdb_target_binaries {
test-gdb_monitor
ld.lib.so
libc.lib.so
}
cli_monitor: add a 'gdb' command This patch adds a 'gdb' command to 'cli_monitor', which makes it possible to debug an application with GDB. The command works similarly to the 'start' command, but instead of starting the subsystem binary directly, an 'init' subsystem gets started, which then starts 'terminal_crosslink', 'noux', GDB and 'gdb_monitor' (which starts the application binary as its target). So, for the 'gdb' command to work, these additional components need to be available, too. 'terminal_crosslink', 'noux', 'gdb_monitor' and the file 'gdb_command_config' are expected to be ROM modules. The Noux GDB client needs to get mounted at '/bin' in Noux and the target binaries need to be available as ROM modules (loaded by 'gdb_monitor') and also mounted at '/gdb' in Noux (loaded by the GDB client). Additionally, the source code of the target application can be provided at '/gdb/src/ in Noux. How the Noux mountings get established can be configured in the 'gdb_command_config' file. The default configuration in 'os/src/server/cli_monitor/gdb_command_config' mounts GDB from a tar archive named 'gdb.tar', the GDB target binaries from a tar archive named 'gdb_target.tar' and the target source code from a tar archive named 'gdb_target-src.tar'. The patch includes an 'expect' include file (ports/run/noux_gdb.inc) which provides functions that help to create those tar files: - 'create_gdb_tar' creates a tar archive for the 'gdb' client - 'create_binary_tar' creates a tar archive for the target application - 'create_source_tar' creates a tar archive for the source code of the target application - 'create_binary_and_source_tars' is a convenience wrapper for the previous two functions The patch also includes an example run script (ports/run/noux_gdb_dynamic.run). The 'gdb' command supports the following command line options: - --ram: the initial RAM quota provided to the whole subsystem (including the GDB-related components) - --ram-limit: limit for expanding RAM quota - --gdb-ram-preserve: the RAM quota that 'gdb_monitor' ahould preserve for itself Fixes #928.
2013-10-25 22:28:55 +02:00
lappend gdb_target_binaries ${gdb_target_binary_name}
cli_monitor: add a 'gdb' command This patch adds a 'gdb' command to 'cli_monitor', which makes it possible to debug an application with GDB. The command works similarly to the 'start' command, but instead of starting the subsystem binary directly, an 'init' subsystem gets started, which then starts 'terminal_crosslink', 'noux', GDB and 'gdb_monitor' (which starts the application binary as its target). So, for the 'gdb' command to work, these additional components need to be available, too. 'terminal_crosslink', 'noux', 'gdb_monitor' and the file 'gdb_command_config' are expected to be ROM modules. The Noux GDB client needs to get mounted at '/bin' in Noux and the target binaries need to be available as ROM modules (loaded by 'gdb_monitor') and also mounted at '/gdb' in Noux (loaded by the GDB client). Additionally, the source code of the target application can be provided at '/gdb/src/ in Noux. How the Noux mountings get established can be configured in the 'gdb_command_config' file. The default configuration in 'os/src/server/cli_monitor/gdb_command_config' mounts GDB from a tar archive named 'gdb.tar', the GDB target binaries from a tar archive named 'gdb_target.tar' and the target source code from a tar archive named 'gdb_target-src.tar'. The patch includes an 'expect' include file (ports/run/noux_gdb.inc) which provides functions that help to create those tar files: - 'create_gdb_tar' creates a tar archive for the 'gdb' client - 'create_binary_tar' creates a tar archive for the target application - 'create_source_tar' creates a tar archive for the source code of the target application - 'create_binary_and_source_tars' is a convenience wrapper for the previous two functions The patch also includes an example run script (ports/run/noux_gdb_dynamic.run). The 'gdb' command supports the following command line options: - --ram: the initial RAM quota provided to the whole subsystem (including the GDB-related components) - --ram-limit: limit for expanding RAM quota - --gdb-ram-preserve: the RAM quota that 'gdb_monitor' ahould preserve for itself Fixes #928.
2013-10-25 22:28:55 +02:00
create_gdb_tar
create_binary_and_source_tars ${gdb_target_binary_name} ${gdb_target_binaries}
create_boot_directory
append config {
<config verbose="yes">
<parent-provides>
<service name="ROM"/>
<service name="LOG"/>
<service name="CAP"/>
<service name="RAM"/>
<service name="RM"/>
<service name="CPU"/>
<service name="PD"/>
<service name="IRQ"/>
<service name="IO_PORT"/>
<service name="IO_MEM"/>
<service name="SIGNAL"/>
</parent-provides>
<default-route>
<any-service> <any-child/> <parent/> </any-service>
</default-route>
<start name="timer">
<resource name="RAM" quantum="1M"/>
<provides><service name="Timer"/></provides>
</start> }
append_if [have_spec sdl] config {
<start name="fb_sdl">
<resource name="RAM" quantum="4M"/>
<provides>
<service name="Input"/>
<service name="Framebuffer"/>
</provides>
</start>}
append_if [have_spec pci] config {
<start name="pci_drv">
<resource name="RAM" quantum="1M"/>
<provides><service name="PCI"/></provides>
</start>}
append_if [have_spec framebuffer] config {
<start name="fb_drv">
<resource name="RAM" quantum="4M"/>
<provides><service name="Framebuffer"/></provides>
</start>}
append_if [have_spec ps2] config {
<start name="ps2_drv">
<resource name="RAM" quantum="1M"/>
<provides><service name="Input"/></provides>
</start>}
append_if [have_spec gpio] config {
<start name="gpio_drv">
<resource name="RAM" quantum="4M"/>
<provides><service name="Gpio"/></provides>
<config/>
</start>}
append_if [expr ![have_spec ps2] && [have_spec usb]] config {
<start name="usb_drv">
<resource name="RAM" quantum="12M"/>
<provides><service name="Input"/></provides>
<config uhci="yes" ehci="yes" xhci="yes"> <hid/> </config>
</start>}
append config {
<start name="terminal_noux">
<binary name="terminal"/>
<resource name="RAM" quantum="2M"/>
<provides><service name="Terminal"/></provides>
<config>
<keyboard layout="de"/>
</config>
</start>
<start name="terminal_gdb">
<binary name="terminal_crosslink"/>
<resource name="RAM" quantum="1M"/>
<provides> <service name="Terminal"/> </provides>
</start>
<start name="gdb_monitor">
<resource name="RAM" quantum="10M"/>
<route>
<service name="Terminal"><child name="terminal_gdb"/></service>
<any-service><parent/><any-child/></any-service>
</route>
<config>
<libc stdout="/dev/log" stderr="/dev/log">
<vfs> <dir name="dev"> <log/> </dir> </vfs>
</libc> }
cli_monitor: add a 'gdb' command This patch adds a 'gdb' command to 'cli_monitor', which makes it possible to debug an application with GDB. The command works similarly to the 'start' command, but instead of starting the subsystem binary directly, an 'init' subsystem gets started, which then starts 'terminal_crosslink', 'noux', GDB and 'gdb_monitor' (which starts the application binary as its target). So, for the 'gdb' command to work, these additional components need to be available, too. 'terminal_crosslink', 'noux', 'gdb_monitor' and the file 'gdb_command_config' are expected to be ROM modules. The Noux GDB client needs to get mounted at '/bin' in Noux and the target binaries need to be available as ROM modules (loaded by 'gdb_monitor') and also mounted at '/gdb' in Noux (loaded by the GDB client). Additionally, the source code of the target application can be provided at '/gdb/src/ in Noux. How the Noux mountings get established can be configured in the 'gdb_command_config' file. The default configuration in 'os/src/server/cli_monitor/gdb_command_config' mounts GDB from a tar archive named 'gdb.tar', the GDB target binaries from a tar archive named 'gdb_target.tar' and the target source code from a tar archive named 'gdb_target-src.tar'. The patch includes an 'expect' include file (ports/run/noux_gdb.inc) which provides functions that help to create those tar files: - 'create_gdb_tar' creates a tar archive for the 'gdb' client - 'create_binary_tar' creates a tar archive for the target application - 'create_source_tar' creates a tar archive for the source code of the target application - 'create_binary_and_source_tars' is a convenience wrapper for the previous two functions The patch also includes an example run script (ports/run/noux_gdb_dynamic.run). The 'gdb' command supports the following command line options: - --ram: the initial RAM quota provided to the whole subsystem (including the GDB-related components) - --ram-limit: limit for expanding RAM quota - --gdb-ram-preserve: the RAM quota that 'gdb_monitor' ahould preserve for itself Fixes #928.
2013-10-25 22:28:55 +02:00
append config "
<target name=\"${gdb_target_binary_name}\"> "
cli_monitor: add a 'gdb' command This patch adds a 'gdb' command to 'cli_monitor', which makes it possible to debug an application with GDB. The command works similarly to the 'start' command, but instead of starting the subsystem binary directly, an 'init' subsystem gets started, which then starts 'terminal_crosslink', 'noux', GDB and 'gdb_monitor' (which starts the application binary as its target). So, for the 'gdb' command to work, these additional components need to be available, too. 'terminal_crosslink', 'noux', 'gdb_monitor' and the file 'gdb_command_config' are expected to be ROM modules. The Noux GDB client needs to get mounted at '/bin' in Noux and the target binaries need to be available as ROM modules (loaded by 'gdb_monitor') and also mounted at '/gdb' in Noux (loaded by the GDB client). Additionally, the source code of the target application can be provided at '/gdb/src/ in Noux. How the Noux mountings get established can be configured in the 'gdb_command_config' file. The default configuration in 'os/src/server/cli_monitor/gdb_command_config' mounts GDB from a tar archive named 'gdb.tar', the GDB target binaries from a tar archive named 'gdb_target.tar' and the target source code from a tar archive named 'gdb_target-src.tar'. The patch includes an 'expect' include file (ports/run/noux_gdb.inc) which provides functions that help to create those tar files: - 'create_gdb_tar' creates a tar archive for the 'gdb' client - 'create_binary_tar' creates a tar archive for the target application - 'create_source_tar' creates a tar archive for the source code of the target application - 'create_binary_and_source_tars' is a convenience wrapper for the previous two functions The patch also includes an example run script (ports/run/noux_gdb_dynamic.run). The 'gdb' command supports the following command line options: - --ram: the initial RAM quota provided to the whole subsystem (including the GDB-related components) - --ram-limit: limit for expanding RAM quota - --gdb-ram-preserve: the RAM quota that 'gdb_monitor' ahould preserve for itself Fixes #928.
2013-10-25 22:28:55 +02:00
append config {
<config>
<libc stdout="/dev/log" stderr="/dev/log">
<vfs> <dir name="dev"> <log/> </dir> </vfs>
</libc>
</config>
</target>
<preserve name="RAM" quantum="5M"/>
</config>
</start>
<start name="noux">
<resource name="RAM" quantum="1G"/>
<route>
<service name="Terminal">
<if-arg key="label" value=""/><child name="terminal_noux"/>
</service>
<service name="Terminal">
<if-arg key="label" value="/dev/gdb"/><child name="terminal_gdb"/>
</service>
<any-service><parent/><any-child/></any-service>
</route>
<config>
<fstab>
<tar name="gdb.tar" at="/"/>
<dir name="dev"><terminal name="gdb" label="/dev/gdb"/></dir>
cli_monitor: add a 'gdb' command This patch adds a 'gdb' command to 'cli_monitor', which makes it possible to debug an application with GDB. The command works similarly to the 'start' command, but instead of starting the subsystem binary directly, an 'init' subsystem gets started, which then starts 'terminal_crosslink', 'noux', GDB and 'gdb_monitor' (which starts the application binary as its target). So, for the 'gdb' command to work, these additional components need to be available, too. 'terminal_crosslink', 'noux', 'gdb_monitor' and the file 'gdb_command_config' are expected to be ROM modules. The Noux GDB client needs to get mounted at '/bin' in Noux and the target binaries need to be available as ROM modules (loaded by 'gdb_monitor') and also mounted at '/gdb' in Noux (loaded by the GDB client). Additionally, the source code of the target application can be provided at '/gdb/src/ in Noux. How the Noux mountings get established can be configured in the 'gdb_command_config' file. The default configuration in 'os/src/server/cli_monitor/gdb_command_config' mounts GDB from a tar archive named 'gdb.tar', the GDB target binaries from a tar archive named 'gdb_target.tar' and the target source code from a tar archive named 'gdb_target-src.tar'. The patch includes an 'expect' include file (ports/run/noux_gdb.inc) which provides functions that help to create those tar files: - 'create_gdb_tar' creates a tar archive for the 'gdb' client - 'create_binary_tar' creates a tar archive for the target application - 'create_source_tar' creates a tar archive for the source code of the target application - 'create_binary_and_source_tars' is a convenience wrapper for the previous two functions The patch also includes an example run script (ports/run/noux_gdb_dynamic.run). The 'gdb' command supports the following command line options: - --ram: the initial RAM quota provided to the whole subsystem (including the GDB-related components) - --ram-limit: limit for expanding RAM quota - --gdb-ram-preserve: the RAM quota that 'gdb_monitor' ahould preserve for itself Fixes #928.
2013-10-25 22:28:55 +02:00
<dir name="gdb"> }
append config "
<tar name=\"${gdb_target_binary_name}.tar\"/>
<dir name=\"src\"> <tar name=\"${gdb_target_binary_name}-src.tar\"/> </dir> "
append config {
</dir>
</fstab> }
append config "
cli_monitor: add a 'gdb' command This patch adds a 'gdb' command to 'cli_monitor', which makes it possible to debug an application with GDB. The command works similarly to the 'start' command, but instead of starting the subsystem binary directly, an 'init' subsystem gets started, which then starts 'terminal_crosslink', 'noux', GDB and 'gdb_monitor' (which starts the application binary as its target). So, for the 'gdb' command to work, these additional components need to be available, too. 'terminal_crosslink', 'noux', 'gdb_monitor' and the file 'gdb_command_config' are expected to be ROM modules. The Noux GDB client needs to get mounted at '/bin' in Noux and the target binaries need to be available as ROM modules (loaded by 'gdb_monitor') and also mounted at '/gdb' in Noux (loaded by the GDB client). Additionally, the source code of the target application can be provided at '/gdb/src/ in Noux. How the Noux mountings get established can be configured in the 'gdb_command_config' file. The default configuration in 'os/src/server/cli_monitor/gdb_command_config' mounts GDB from a tar archive named 'gdb.tar', the GDB target binaries from a tar archive named 'gdb_target.tar' and the target source code from a tar archive named 'gdb_target-src.tar'. The patch includes an 'expect' include file (ports/run/noux_gdb.inc) which provides functions that help to create those tar files: - 'create_gdb_tar' creates a tar archive for the 'gdb' client - 'create_binary_tar' creates a tar archive for the target application - 'create_source_tar' creates a tar archive for the source code of the target application - 'create_binary_and_source_tars' is a convenience wrapper for the previous two functions The patch also includes an example run script (ports/run/noux_gdb_dynamic.run). The 'gdb' command supports the following command line options: - --ram: the initial RAM quota provided to the whole subsystem (including the GDB-related components) - --ram-limit: limit for expanding RAM quota - --gdb-ram-preserve: the RAM quota that 'gdb_monitor' ahould preserve for itself Fixes #928.
2013-10-25 22:28:55 +02:00
<start name=\"/bin/${tool_prefix}gdb\">
<arg value=\"/gdb/${gdb_target_binary_name}\"/> "
append config {
<arg value="-ex" /><arg value="set interactive-mode off" />
<arg value="-ex" /><arg value="directory /gdb/src" />
<arg value="-ex" /><arg value="target remote /dev/gdb" />
<arg value="-ex" /><arg value="symbol-file /gdb/ld.lib.so" />
<arg value="-ex" /><arg value="b call_program_main" />
cli_monitor: add a 'gdb' command This patch adds a 'gdb' command to 'cli_monitor', which makes it possible to debug an application with GDB. The command works similarly to the 'start' command, but instead of starting the subsystem binary directly, an 'init' subsystem gets started, which then starts 'terminal_crosslink', 'noux', GDB and 'gdb_monitor' (which starts the application binary as its target). So, for the 'gdb' command to work, these additional components need to be available, too. 'terminal_crosslink', 'noux', 'gdb_monitor' and the file 'gdb_command_config' are expected to be ROM modules. The Noux GDB client needs to get mounted at '/bin' in Noux and the target binaries need to be available as ROM modules (loaded by 'gdb_monitor') and also mounted at '/gdb' in Noux (loaded by the GDB client). Additionally, the source code of the target application can be provided at '/gdb/src/ in Noux. How the Noux mountings get established can be configured in the 'gdb_command_config' file. The default configuration in 'os/src/server/cli_monitor/gdb_command_config' mounts GDB from a tar archive named 'gdb.tar', the GDB target binaries from a tar archive named 'gdb_target.tar' and the target source code from a tar archive named 'gdb_target-src.tar'. The patch includes an 'expect' include file (ports/run/noux_gdb.inc) which provides functions that help to create those tar files: - 'create_gdb_tar' creates a tar archive for the 'gdb' client - 'create_binary_tar' creates a tar archive for the target application - 'create_source_tar' creates a tar archive for the source code of the target application - 'create_binary_and_source_tars' is a convenience wrapper for the previous two functions The patch also includes an example run script (ports/run/noux_gdb_dynamic.run). The 'gdb' command supports the following command line options: - --ram: the initial RAM quota provided to the whole subsystem (including the GDB-related components) - --ram-limit: limit for expanding RAM quota - --gdb-ram-preserve: the RAM quota that 'gdb_monitor' ahould preserve for itself Fixes #928.
2013-10-25 22:28:55 +02:00
<arg value="-ex" /><arg value="c" />
<arg value="-ex" /><arg value="delete 1" /> }
append config "
<arg value=\"-ex\" /><arg value=\"symbol-file /gdb/${gdb_target_binary_name}\" /> "
append config {
<arg value="-ex" /><arg value="b main()" />
cli_monitor: add a 'gdb' command This patch adds a 'gdb' command to 'cli_monitor', which makes it possible to debug an application with GDB. The command works similarly to the 'start' command, but instead of starting the subsystem binary directly, an 'init' subsystem gets started, which then starts 'terminal_crosslink', 'noux', GDB and 'gdb_monitor' (which starts the application binary as its target). So, for the 'gdb' command to work, these additional components need to be available, too. 'terminal_crosslink', 'noux', 'gdb_monitor' and the file 'gdb_command_config' are expected to be ROM modules. The Noux GDB client needs to get mounted at '/bin' in Noux and the target binaries need to be available as ROM modules (loaded by 'gdb_monitor') and also mounted at '/gdb' in Noux (loaded by the GDB client). Additionally, the source code of the target application can be provided at '/gdb/src/ in Noux. How the Noux mountings get established can be configured in the 'gdb_command_config' file. The default configuration in 'os/src/server/cli_monitor/gdb_command_config' mounts GDB from a tar archive named 'gdb.tar', the GDB target binaries from a tar archive named 'gdb_target.tar' and the target source code from a tar archive named 'gdb_target-src.tar'. The patch includes an 'expect' include file (ports/run/noux_gdb.inc) which provides functions that help to create those tar files: - 'create_gdb_tar' creates a tar archive for the 'gdb' client - 'create_binary_tar' creates a tar archive for the target application - 'create_source_tar' creates a tar archive for the source code of the target application - 'create_binary_and_source_tars' is a convenience wrapper for the previous two functions The patch also includes an example run script (ports/run/noux_gdb_dynamic.run). The 'gdb' command supports the following command line options: - --ram: the initial RAM quota provided to the whole subsystem (including the GDB-related components) - --ram-limit: limit for expanding RAM quota - --gdb-ram-preserve: the RAM quota that 'gdb_monitor' ahould preserve for itself Fixes #928.
2013-10-25 22:28:55 +02:00
<arg value="-ex" /><arg value="set solib-search-path /gdb" />
<arg value="-ex" /><arg value="sharedlibrary" />
<arg value="-ex" /><arg value="c" />
<arg value="-ex" /><arg value="delete 2" />
<arg value="-ex" /><arg value="set interactive-mode auto" />
</start>
</config>
</start>
</config>
}
install_config $config
#
# Boot modules
#
# generic modules
set boot_modules {
core init timer ld.lib.so noux terminal terminal_crosslink
libc.lib.so libm.lib.so libc_noux.lib.so ncurses.lib.so expat.lib.so
libc_lock_pipe.lib.so libc_terminal.lib.so
cli_monitor: add a 'gdb' command This patch adds a 'gdb' command to 'cli_monitor', which makes it possible to debug an application with GDB. The command works similarly to the 'start' command, but instead of starting the subsystem binary directly, an 'init' subsystem gets started, which then starts 'terminal_crosslink', 'noux', GDB and 'gdb_monitor' (which starts the application binary as its target). So, for the 'gdb' command to work, these additional components need to be available, too. 'terminal_crosslink', 'noux', 'gdb_monitor' and the file 'gdb_command_config' are expected to be ROM modules. The Noux GDB client needs to get mounted at '/bin' in Noux and the target binaries need to be available as ROM modules (loaded by 'gdb_monitor') and also mounted at '/gdb' in Noux (loaded by the GDB client). Additionally, the source code of the target application can be provided at '/gdb/src/ in Noux. How the Noux mountings get established can be configured in the 'gdb_command_config' file. The default configuration in 'os/src/server/cli_monitor/gdb_command_config' mounts GDB from a tar archive named 'gdb.tar', the GDB target binaries from a tar archive named 'gdb_target.tar' and the target source code from a tar archive named 'gdb_target-src.tar'. The patch includes an 'expect' include file (ports/run/noux_gdb.inc) which provides functions that help to create those tar files: - 'create_gdb_tar' creates a tar archive for the 'gdb' client - 'create_binary_tar' creates a tar archive for the target application - 'create_source_tar' creates a tar archive for the source code of the target application - 'create_binary_and_source_tars' is a convenience wrapper for the previous two functions The patch also includes an example run script (ports/run/noux_gdb_dynamic.run). The 'gdb' command supports the following command line options: - --ram: the initial RAM quota provided to the whole subsystem (including the GDB-related components) - --ram-limit: limit for expanding RAM quota - --gdb-ram-preserve: the RAM quota that 'gdb_monitor' ahould preserve for itself Fixes #928.
2013-10-25 22:28:55 +02:00
gdb_monitor test-gdb_monitor
gdb.tar test-gdb_monitor.tar test-gdb_monitor-src.tar
}
# platform-specific modules
lappend_if [have_spec linux] boot_modules fb_sdl
lappend_if [have_spec pci] boot_modules pci_drv
lappend_if [have_spec framebuffer] boot_modules fb_drv
lappend_if [have_spec ps2] boot_modules ps2_drv
lappend_if [have_spec usb] boot_modules usb_drv
lappend_if [have_spec gpio] boot_modules gpio_drv
build_boot_image $boot_modules
run_genode_until forever
exec rm bin/gdb.tar